Gauge Calibration Rig - HTL...
2
+44 (0) 1670 700 000 [email protected] WWW.HIRETORQUE.COM h i r e t o r q u e MADE IN THE UK ATEX APPROVED CE APPROVED 12 MONTH WARRANTY 12 MONTH Gauge Calibration Rig HTL Worldwide manufacture a range of calibration, test and training rigs based upon a proven standard base design with a bespoke feel. Using the highest standards of design and manufacture with a range of options and safety features they allow calibration and test of a range of bolting equipment as well as training your operators to recognised industry standards. This cabinet enclosed rig allows the user to pressure test pneumatic gauges up to 300 psi and hydraulic gauges up to 40000 psi. Housed in a durable blue powder coated body with perspex interlocked safety cover the rig includes a digital readout and dedicated hand pump for accurate interval calibration if required. Capacity to pressure test pneumatic gauges up to 300 psi Capacity to pressure test hydraulic gauges up to 400 psi Made in the UK Perspex interlocked safety cover Designed with digital readout Dedicated hand pump provided Safe to use Highly accurate Low maintenance Features and Benefits
Transcript of Gauge Calibration Rig - HTL...
-
+44 (0) 1670 700 000 [email protected] WWW.HIRETORQUE.COM
hire torque
MADE IN THE UK
ATEX APPROVED
CE APPROVED
12 MONTHWARRANTY
12MONTH
Gauge Calibration RigHTL Worldwide manufacture a range of calibration, test and training rigs based upon a proven standard base design with a bespoke feel. Using the highest standards of design and manufacture with a range of options and safety features they allow calibration and test of a range of bolting equipment as well as training your operators to recognised industry standards.
This cabinet enclosed rig allows the user to pressure test pneumatic gauges up to 300 psi and hydraulic gauges up to 40000 psi. Housed in a durable blue powder coated body with perspex interlocked safety cover the rig includes a digital readout and dedicated hand pump for accurate interval calibration if required.
Capacity to pressure test pneumatic gauges up to 300 psi
Capacity to pressure test hydraulic gauges up to 400 psi
Made in the UK
Perspex interlocked safety cover
Designed with digital readout
Dedicated hand pump provided
Safe to use
Highly accurate
Low maintenance
Features and Benefits
-
INDUSTRY LEADERS IN CONTROLLED BOLTING, FLANGE WORKING AND PORTABLE MACHINE SOLUTIONS
Hire Torque Ltd45 Colbourne Avenue,Nelson Park Industrial Estate,Cramlington, Northumberland,NE23 1WD
Telephone: +44 (0) 1670 700 000Email: [email protected]: www.hiretorque.com
Technical Information
hire torque
PLEASE NOTE: Figures provided are for guidance only, please refer to individual tool charts. All data is given in good faith and without acceptance of responsibility on the part of HTL.
B
C
Model
Frame Gauge PSI gauge A B C
mm Inch mm Inch mm Inch
Gauge Calibration Rig Yes Dual 10” 10000 1775 69.8 706 27.8 1482 58.3
