Gas Metal Arc - Welding Wires (Solid Wires)

download Gas Metal Arc - Welding Wires (Solid Wires)

of 26

Embed Size (px)

Transcript of Gas Metal Arc - Welding Wires (Solid Wires)

  • Gas Metal Arc WeldingWires(Solid Wires)

    FOR HIGH TENSILE STRENGTH STEEL

    FOR HEAT-RISISTING STEEL

  • KC-25For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    157

    Shielding gas

    CO2

    ABS

    3SA

    DNVYMS

    LR

    3YS H15

    KR

    3YSG

    NK

    KSW53G

    AWS A5.18EN ISO 14341-AExample

    Y.S(MPa)

    min. 400min. 420

    430

    T.S(MPa)

    min. 480500~640

    520

    El.(%)

    min. 22min. 20

    33

    IV (J)-20

    27 47

    90

    Remarks

    CO2CO2CO2

    C0.07

    Si0.67

    Mn1.20

    P0.015

    S0.011

    Classifications

    Description

    EN ISO 14341-A:2008 : G 42 2 C G2Si1 KS D 7025 : YGW14EN ISO 14341-B:2008 : G 49A 2 C G3 JIS Z 3312 : G 43 A 0 U C 3AWS A5.18-05 : ER70S-3

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesSuited for welds that are subject to enamelling or galvanising due to low Si-contentExcellent performance of root welding for multiple pass weldsSuited for application of sheet metal with superior arc stability on low welding current

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating data

    Approvals

    DCEP (DC+)CO2 : 100% CO2 (15~25/min.)

    Others: CWB, KS, JIS

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 70 ~ 200 100 ~ 250

    Overhead (PE/4G) 70 ~ 200 100 ~ 250

  • KC-25MFor mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    158

    C0.07

    Si0.67

    Mn1.20

    P0.015

    S0.011

    AWS A5.18EN ISO 14341-AExample

    Y.S(MPa)

    min. 400min. 420

    440

    T.S(MPa)

    min. 480500~640

    540

    El.(%)

    min. 22min. 20

    30

    IV (J)-20

    27 47100

    Remarks

    CO2MixMix

    Classifications

    Description

    EN ISO 14341-A:2008 : G 42 2 M G2Si1 KS D 7025 : YGW16EN ISO 14341-B:2008 : G 49A 2 M G3 JIS Z 3312 : YGW16AWS A5.18-05 : ER70S-3

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesSuited for application of sheet metal with mixture gas and all welding positionsLow slag formation, high deposition rate and superior arc stability

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating dataDCEP (DC+)CO2 : 100% CO2Mix : Ar+20% CO2 (15~25/min.)

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 50 ~ 180 100 ~ 250

    Overhead (PE/4G) 50 ~ 180 100 ~ 250

  • KC-26For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    159

    Shielding gas

    CO2Mix

    ABS

    3YSA-

    BV

    SA3YM-

    DNV

    YMS-

    GL

    3YS-

    LR

    3YS H15-

    KR

    3YSG-

    NK

    KSW53GKSW53G

    AWS A5.18EN ISO 14341-B

    Example

    Y.S(MPa)

    min. 400min. 390

    490520

    T.S(MPa)

    min. 480490~670

    570590

    El.(%)

    min. 22min. 18

    3031

    IV (J)-20

    27110120

    Remarks

    CO2CO2Mix

    C0.06

    Si0.80

    Mn1.53

    P0.014

    S0.010

    Ti0.18

    Classifications

    Description

    EN ISO 14341-A:2008 : G 46 2 C G0 AWS A5.18-05 : ER70S-GEN ISO 14341-A:2008 : G 46 2 M G0 KS D 7025 : YGW11EN ISO 14341-B:2008 : G 49A 2 C G11 JIS Z 3312 : YGW11EN ISO 14341-A:2008 : G 49A 2 M G11

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesExcellent defect resistant on high heat inputPossible to acheive higher productivity due to low spatter and deep penetrationBeautiful weld apperance on flat or horizontal welding position

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating data

    Approvals

    DCEP (DC+)CO2 : 100% CO2Mix : Ar+20% CO2 (15~25/min.)

    Others: KS, JIS

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 50 ~ 180 100 ~ 250

    Overhead (PE/4G) 50 ~ 180 100 ~ 250

  • ZO-26For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    160

    C0.06

    Si0.80

    Mn1.53

    P0.014

    S0.010

    Ti0.18

    AWS A5.18EN ISO 14341-B

    Example

    Y.S(MPa)

    min. 400min. 390

    490520

    T.S(MPa)

    min. 480490~670

    570590

    El.(%)

    min. 22min. 18

    3031

    IV (J)-20

    27110120

    Remarks

    CO2CO2Mix

    Others : KS, JIS

    Shielding gas

    CO2

    ABS

    3YSA

    BV

    SA3YM

    DNVYMS

    GL

    3YS

    LR

    3YS H15

    KR

    RSW53G

    NK

    KSW53G

    Classifications

    Description

    EN ISO 14341-A:2008 : G 46 2 C G0 AWS A5.18-05 : ER70S-GEN ISO 14341-A:2008 : G 46 2 M G0 KS D 7025 : YGW11EN ISO 14341-B:2008 : G 49A 2 C G11 JIS Z 3312 : YGW11EN ISO 14341-A:2008 : G 49A 2 M G11

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesExcellent defect resistant on high heat inputPossible to acheive higher productivity due to low spatter and deep penetrationBeautiful weld apperance on flat or horizontal welding position

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating data

    Approvals

    DCEP (DC+)CO2 : 100% CO2Mix : Ar+20% CO2 (15~25/min.)

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 70 ~ 200 100 ~ 250

    Overhead (PE/4G) 70 ~ 200 100 ~ 250

  • KC-27For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    161

    Shielding gas

    Mix

    ABS

    3YSA

    DNVYMS

    NK

    KSW53G

    AWS A5.18EN ISO 14341-BExample

    Y.S(MPa)

    min. 400min. 390

    490

    T.S(MPa)

    min. 480490~670

    560

    El.(%)

    min. 22min. 18

    31

    IV (J)-20

    27160

    Remarks

    MixMix

    Classifications

    Description

    EN ISO 14341-A:2008 : G 46 2 M G0 KS D 7025 : YGW15EN ISO 14341-B:2008 : G 49A 2 M G15 JIS Z 3312 : YGW15 AWS A5.18-05 : ER70S-G

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesSuited for application of automatic pipe welding with carbon dioxide or mixture gasLow spatter and beautiful weld appearancePossible to perform with all welding positions and get high impact value in welds

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating data

    Approvals

    DCEP (DC+)Mix : Ar+20% CO2 (15~25/min.)

    Others : JIS

    C0.07

    Si0.62

    Mn1.18

    P0.014

    S0.010

    Ti0.09

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 50 ~ 180 100 ~ 250

    Overhead (PE/4G) 50 ~ 180 100 ~ 250

  • ZO-27For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    162

    AWS A5.18EN ISO 14341-BExample

    Y.S(MPa)

    min. 400min. 390

    490

    T.S(MPa)

    min. 480490~670

    560

    El.(%)

    min. 22min. 18

    31

    IV (J)-20

    27160

    Remarks

    MixMix

    Others : JIS

    Shielding gas

    Mix

    ABS

    3YSA

    DNVYMS

    LR

    3YS H15

    NK

    KSW53G

    Classifications

    Description

    EN ISO 14341-A:2008 : G 46 2 M G0 KS D 7025 : YGW15 EN ISO 14341-B:2008 : G 49A 2 M G15 JIS Z 3312 : YGW15 AWS A5.18-05 : ER70S-G

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesSuited for application of automatic pipe welding with carbon dioxide or mixture gasLow spatter and beautiful weld appearancePossible to perform with all welding positions and get high impact value in welds

    Polarity and Shielding gas

    Typical chemical composition of wire (%)

    Typical mechanical properties of all-weld metal

    Operating data

    Approvals

    DCEP (DC+)Mix : Ar+20% CO2 (15~25/min.)

    C0.07

    Si0.62

    Mn1.18

    P0.014

    S0.010

    Ti0.09

    Dia.(mm) 1.2 1.4

    Current(Amp.)

    Flat (PA/1G) 100 ~ 350 140 ~ 400Vertical (PF/3G) 50 ~ 180 100 ~ 250

    Overhead (PE/4G) 50 ~ 180 100 ~ 250

  • KC-28For mild steel and 490MPa tensil strength steel

    Gas Metal Arc Welding

    163

    AWS A5.18EN ISO 14341-A

    Example

    Y.S(MPa)

    min. 400min. 420

    450480

    T.S(MPa)

    min. 480500~640

    550580

    El.(%)

    min. 22min. 20

    3028

    IV (J)-30

    27 47

    7080

    Remarks

    CO2CO2CO2Mix

    C0.07

    Si0.86

    Mn1.53

    P0.012

    S0.007

    Classifications

    Description

    EN ISO 14341-A:2008 : G 42 2 C G3Si1 AWS A5.18-05 : ER70S-6EN ISO 14341-B:2008 : G 42 3 M G3Si1 KS D 7025 : YGW12 EN ISO 14341-B:2008 : G 49A 3 C G6 JIS Z 3312 : YGW12

    : G 49A 3 M G6

    For butt and fillet welding of ship-building, bridges, structural steel, steel buildings, machineries and vehiclesServed as both carbon dioxide and mixture gas, and stable arc performance in almost welding currentA wide range of use due to low spatter and all welding positionSuited for application of sheet metal on high welding current without