GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER...

15
ECN 1030764 GARDNER DENVER ® 300CPX997 Rev B May, 2006

Transcript of GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER...

Page 1: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

ECN 1030764

GARDNER DENVER® 300CPX997 Rev BMay, 2006

Page 2: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

PARTS LISTFOR

CENTRIFUGAL PUMPS

MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITHGENUINE GARDNER DENVER

PARTS AND SUPPORT SERVICES

Gardner Denver® genuine pump parts are manufactured to design tolerances and are developed for optimumdependability. Design and material innovations are the result of years of experience with hundreds of different pumpapplications. Reliability in materials and quality assurance is incorporated in our genuine replacement parts.

Your authorized Gardner Denver Sales Office offers all of the backup you ll need. The Fort Worth ManufacturingFacility maintains a large inventory of genuine parts.

Gardner Denver supports your needs with these services:

1. Trained parts specialists to assist you in selecting the correct replacement parts.

2. Repair and maintenance kits designed with the necessary parts to simplify servicing your pump.

Authorized service technicians are factory trained and skilled in pump maintenance and repair. They are ready torespond and assist you by providing fast, expert maintenance and repair services.

For the location of your local authorized Gardner Denver distributor, refer to the yellow pages of yourphone directory or contact:

Factory (Tulsa): Service Center (Odessa): Service Center (Ft. Worth):Gardner Denver Well Servicing Pumps4747 South 83rd East AvenueTulsa, Oklahoma 74145

Chaparral2121 West 44th StreetOdessa, TX 79768

Geoquip7533 Kathy LaneFt. Worth, Texas 76126

Phone: (918) 664-1151(800) 738-8099

Phone: (432) 366-5433 (800) 368-1134

Phone: (817) 249-6400 (800) 824-0271

Fax: (918) 664-6225 Fax: (432) 363-9940 Fax: (817) 249-6401

INSTRUCTIONS FOR ORDERING REPAIR PARTS

When ordering parts, specify Pump MODEL and SERIAL NUMBER (see nameplate on unit).

All orders for Parts should be placed with the Tulsa or Ft. Worth facility.

SPECIFY EXACTLY THE NUMBER OF PARTS REQUIRED.

Page 3: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER PRODUCT WARRANTY

GENERAL PROVISIONS ANDLIMITATIONS

Gardner Denver (the "Company") warrants toeach original retail purchaser ("Purchaser") of itsnew products, assemblies or parts from theCompany or its authorized distributors that suchproducts are, at the time of delivery to thePurchaser, made with good material andworkmanship. No warranty is made with respectto:

1. Any product which has been repaired oraltered in such a way, in the Company'sjudgment, as to affect the productadversely.

2. Any product which has, in the Company'sjudgment, been subject to negligence,accident, or improper storage, improperinstallation, operation or application.(Examples: over-pressure, sand-outs,cavitation, corrosion, erosion ordegradation).

3. Any product which has not been operatedor maintained in accordance with therecommendations of the Company.

4. Components or accessories manufactured,warranted and serviced by others.Any reconditioned or prior owned product.

Claims for items described in (4) above should besubmitted directly to the manufacturer.

WARRANTY PERIODThe Company's obligation under this warranty islimited to repairing or, at its option, replacing,during normal business hours at an authorizedservice facility of the Company, any part orassembly which in the Company s judgmentproved to have unsatisfactory material orworkmanship within the applicable WarrantyPeriod as follows.

Except for the products or components listedbelow, and subject to the limitations andrestrictions set forth in the Disclaimer sectionset forth below, the Warranty Period for allproducts is 1,250 hours of operation or three (3)months after start-up, not to exceed 120 daysafter delivery to Purchaser, whichever occursfirst. The exceptions are as follows:

1. Power end is warranted for twelve (12)months from date of start-up or eighteen(18) months from date of delivery to thePurchaser, whichever occurs first.

2. Forged steel fluid cylinders are warrantedfor materials and workmanship for 6 months

from the date of installation or 18 monthsfrom the date of delivery to the purchaser,which ever occurs first.

3. Repairs are warranted for 90 days from thedate of delivery, for the workmanship andmaterials of the new parts installed.

4. Weld repaired fluid ends and weld repairedcomponents are not warranted.

5. Expendable fluid end parts, including, butnot limited to, valves, valve parts, packing,liners and pistons, are not covered by thiswarranty due to variable abrasive nature ofmaterial pumped.

PRESERVATION ASSEMBLIESDESTINED FOR STORAGE

In order for warranty acceptance any pumpassembly not immediately installed or destined tobe in storage or in transit for extended periods oftime must be prepared for storage as defined inthe Company s Long Term Storage Procedure.This includes but is not limited to:

Drain and thoroughly clean inside power endcrankcase.

Spray rust inhibiting oil on all bearing, machinedand inside surfaces of the power end.

Induce clean gear oil into any circulating pump,filter, heat exchanger and piping.

Remove valves, seats and plungers from the fluidend. Thoroughly clean and dry these parts andall internal surfaces. Coat all cylinder bores,valve covers and reusable expendable partswith rust preventative.

Flush all water, and contaminants from pump,tanks, hoses and spray nozzles. Spray allcomponents with a rust inhibiting oil.

Rotate pump every 30 days to insure bearings areoiled.

At the expense of the Purchaser, any productproperly preserved must be inspected by anauthorized agent of the Company, prior to theCompany, granting any extended warrantybeyond that stated in this warranty.

LABOR TRANSPORTATION ANDINSPECTION

The Company will provide labor, by Companyrepresentative or authorized service personnel,for repair or replacement of any product or partthereof which in the Company's judgment isproved not to be as warranted. Labor shall belimited to the amount specified in the Company'slabor rate schedule. Labor costs in excess of theCompany rate schedules caused by, but not

Page 4: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

limited to, location or inaccessibility of theequipment, or labor provided by unauthorizedservice personnel is not provided for by thiswarranty.

All costs of transportation of product or partsclaimed not to be as warranted and, of repairedor replacement parts to or from such servicefacility shall be borne by the Purchaser. TheCompany may require the return of any partclaimed not to be as warranted to one of itsfacilities as designated by the Company,transportation prepaid by the Purchaser, toestablish a claim under this warranty.

Replacement parts provided under the terms ofthis warranty are warranted for the remainder ofthe Warranty Period of the product upon whichinstalled to the same extent as if such parts wereoriginal components.

The Company may request a root cause analysisbe performed in-order to identify if a request forwarranty claim meets the requirements of thiswarranty.

DISCLAIMERExcept as to title, the foregoing warranty is thesole and exclusive warranty of the Company.The Company hereby extends othermanufactures warranty or guaranties, if anygiven to Company by such manufacturer, butonly to the extent the Company is able to enforcesuch warranty or guaranties. The Company hasnot authorized any party to make anyrepresentation or warranty other than asexpressly set forthherein. SELLER HEREBYDISCLAIMS AND EXCLUDES ANY OTHEREXPRESS, IMPLIED OR STATUTORYWARRANTIES, ARISING BY OPERATION OF LAWOR OTHERWISE, INCLUDING, WITHOUTLIMITATION, ANY WARRANTIES OFMERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. COMPANY MAKES NOWARRANTIES OR REPRESENTATIONS OF ANYKIND WHATSOEVER (EXPRESS, IMPLIED ORSTATUTORY), OF LAW OR OTHERWISE, ON ANYEQUIPMENT, COMPONENT PARTS ORACCESSORIES SOLD HEREUNDER WHICH, ARENOT MANUFACTURED BY COMPANY.

NOTWITHSTANDING ANYTHING HEREIN TO THECONTRARY, THE FOREGOING WARRANTYSHALL BE THE SOLE AND EXCLUSIVE REMEDY

AVAILABLE TO THE PURCHASER. UNDER NOCIRCUMSTANCES, WHETHER IN CONTRACT,TORT OR OTHERWISE, SHALL THE COMPANY STOTAL LIABILITY ARISING IN CONNECTIONWITH ANY PURCHASE ORDER EXCEED THEAMOUNT OF ANY SALES OR OTHER PROCEEDSRECEIVED PURSUANT THERETO. IN ADDITION,UNDER NO CIRCUMSTANCES, WHETHER INCONTRACT, TORT OR OTHERWISE, SHALL THECOMPANY BE LIABLE FOR LIQUIDATED,SPECIAL, INDIRECT, INCIDENTAL, EXEMPLARY,OR CONSEQUENTIAL DAMAGES, EXPENSES ORCOSTS, INCLUDING, WITHOUT LIMITATION,LOST PROFITS OR FACILITY DOWNTIME,HOWEVER CAUSED AND EVEN IF THEPOTENTIAL OF SUCH DAMAGES WASDISCLOSED AND/OR KNOWN.

No statement, representation, agreement, orunderstanding, oral or written, made by anyagent, distributor, representative, or employee ofthe Company which is not contained in thisWarranty will be binding upon the Companyunless made in writing and executed by an officerof the Company.

This warranty shall not be effective as to anyclaim which is not presented within 30 days afterthe date upon which the product is claimed not tohave been as warranted. Any action for breach ofthis warranty must be commenced within oneyear after the date upon which the cause ofaction occurred.

Any adjustment made pursuant to this warrantyshall not be construed as an admission by theCompany that any product was not as warranted.

WARRANTY REQUESTSProducts to be returned for warranty analysis shall

be approved for return in writing by the Companyprior to shipment. All requests for product returnshall be submitted by email. Facsimile or letter to:

Warranty Department c/oGardner Denver Petroleum Pumps4747 South 83rd East AvenueTulsa, Oklahoma 74145

Email: [email protected]: (918) 664-6225

Page 5: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASYMAINTENANCE.

A lightweight, compact, extremely rugged pump requiring minimal mounting space.

A heavy steel frame and mounting bracket for horizontal or vertical positioning.

Every frame is predrilled to accept a direct drive SAE B hydraulic motor, in conjunction withGardner Denver s internal splined shaft to eliminate down time due to misalignment. A key drivenshaft is also available.

Segmented construction allows the customer to purchase only those parts necessary for repair.

Sacrificial front and rear wear plates are provided with every new pump. Rubber coated plates arenormally provided, although steel plates are available for exotic mediums such as Zylene andToluene.

Change of rotation may be easily accomplished by simply removing, turning and positioning thevolute, and changing the impeller to match the desired direction of rotation.

The open impellers allow the free movement of large particles and extremely heavy, abrasive ladenslurries. Available in either clockwise or counterclockwise rotation, the impeller is secured to theshaft by a superior designed locking system.

We offer two packing choices. Solid lip seals provide efficient service with a minimum amount ofattention. Split compression type packing is available for more severe service conditions.

Bearings are double row inboard for radial thrusts, and a single row outboard for axial thrusts.

Page 6: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

BY MODELNUMBER

Explanation ofModel Number

4 DISCHARGE OPENING

5 SUCTIONOPENING

C IMPELLERC=ClockwiseCC=Counter-clockwise

S PACKINGS=SquareO=Oil Seal

R WEAR PLATESR=RubberS=Steel

K SHAFTK=Key DriveS=Spline Drive

RefNo. Name of Part Qty. Part No.

Ref.No. Name of Part Qty. Part No.

1 SET SCREW.............................................. 1 28775 28 SUCTION ADAPTOR ............................. 1 198382 IMPELLER BOLT ...................................... 1 19846-T 29 NUT ......................................................... 24 397413 IMPELLER LOCK...................................... 1 19843-T 30 STUD....................................................... 14 2324445

SNAP RING ...............................................THROAT BUSHING...................................

11

2601920123

31 FRONT RUBBER COATED WEARPLATE..................................................... 1 TUL19849

6 GREASE FITTING..................................... 1 45010 31A FRONT STEEL Wear Plate .................... 1 325547 Not Offered (Replaced by 7A) (Requires O-rings)

7A8

STUFFING BOX (Split Packing) ..............OIL SEAL SOLID PACKING.....................

13 or 4

19842-T6679

31B O-RING, For Front Steel Wear Plate .... 1 25BC157

8A SQUARE COMPRESSION Packing.........(5 pieces per set

1 Set 26018 31C O-RING, For Front/Rear Steel WearPlates...................................................... 2 25BC206

910

LANTERN GLAND ....................................PACKING FOLLOWER, SOLID................

11

1985019845

3233

GASKET, DISCHARGE..........................VOLUTE..................................................

11

3521619830

34 PIPE PLUG ............................................. 1 1565110A PACKING FOLLOWER, 2 PIECE ............. 1 19845-2P 35 PIPE PLUG ............................................. 7 1565311

11ASTUFFING BOX NUT, SOLID...................STUFFING BOX NUT, 2 PIECE ................

11

1984819848-2P

36 IMPELLER, Counterclockwise ............. 1 19836

1213

IMPELLER KEY.........................................IMPELLER SHAFT, SPLINED ..................

11

4500219839

37 IMPELLER, Clockwise........................... 1 TUL19835

13A IMPELLER SHAFT, EXTENDED KEYDRIVE ........................................................ 1 29132

38 REAR RUBBER WEAR PLATE............. 1 19853

14 DRIVE KEY................................................ 1 45348 38A REAR STEEL WEAR PLATE.................(Requires O-Rings)

1 32553

15 OIL SEAL, INBOARD................................ 1 15004 38B O-RING, (for rear steel wear plate)....... 1 25BC58316 FRAME CAP.............................................. 1 TUL19854 39 STUD, REAR STEEL WEAR PLATE..... 2 2324517 SHIM .......................................................... 2 19847 40 GREASE FITTING (One Vented)........... 1 Set 3814018 BEARING, Inboard double row ............... 1 45307 41 FRAME.................................................... 1 198091920

BEARING SPACER...................................BEARING, Outboard Single Row............

11

198447607

42 MOUNTING BRACKET .......................... 1 29141

21 BEARING LOCK WASHER ...................... 1 26015 43 STUD, MOUNTINGBRACKET/FRAME/VOLUTE ................. 4 23242

22 BEARING LOCK NUT............................... 1 26014 44 GASKET, HYDRAULICMOTOR/FRAME ..................................... 1 15286

23 O-RING ...................................................... 1 25AH18 45 STRAP .................................................... 2 1985524 OIL SEAL RETAINER, OUTBOARD ........ 1 TUL19852 46 HEX BOLT, STRAP/FRAME .................. 4 655ED08025 SNAP RING, OUTBOARD ........................ 1 26017 47 LATCH (Stuffing Box Cap).................... 1 Tul1949826 OIL SEAL, OUTBOARD............................ 1 12456 48 SPRING................................................... 1 2386827 GASKET, SUCTIION................................. 1 35193 49 PIPE CAP................................................ 1 23015

Note:Assembly shown is CounterclockwiseNote:Assembly shown is Counterclockwise

Page 7: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASYMAINTENANCE.

A lightweight, compact, extremely rugged pump requiring minimal mounting space.

A heavy steel frame and mounting bracket for horizontal or vertical positioning.

Every frame is predrilled to accept a direct drive SAE C two or four bolt-hydraulic motor inconjunction with Gardner Denver s internal splined shaft to eliminate down time due tomisalignment. A key driven shaft is also available.

Segmented construction allows the customer to purchase only those parts necessary for repair.

Sacrificial front and rear wear plates are provided with every new pump. Rubber coated plates arenormally provided, although steel plates are available for exotic mediums such as Zylene andToluene.

Change of rotation may be easily accomplished by simply removing, turning and positioning thevolute, and changing the impeller to match the desired direction of rotation.

The open impellers allow the free movement of large particles and extremely heavy, abrasive ladenslurries. Available in either clockwise or counterclockwise rotation, the impeller is secured to theshaft by a superior designed locking system.

We offer two packing choices. Solid lip seals provide efficient service with a minimum amount ofattention. Split compression packing is available for more severe service conditions.

Bearings are double row inboard for radial thrusts, and a single row outboard for axial thrusts.

Page 8: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

ORDER BYMODEL NUMBER

Explanation ofModel Number

5 DISCHARGE OPENING

6 SUCTIONOPENING

C IMPELLERC=ClockwiseCC=Counter-clockwise

S PACKINGS=SquareO=Oil Seal

R WEAR PLATESR=RubberS=Steel

K SHAFTK=Key DriveS=Spline Drive

RefNo. Name of Part Qty. Part No.

Ref.No. Name of Part Qty. Part No.

1 SET SCREW.............................................. 1 28775 30 NUT ......................................................... 16 2326023

IMPELLER BOLT ......................................IMPELLER LOCK......................................

11

18829-T18838-T

31 STUD, FRONT WEAR PLATESUCTION ADAPTOR ............................. 2 23244

45

SNAP RING ...............................................THROAT BUSHING...................................

11

23144Tul20122

32 FRONT RUBBER COATED WEARPLATE..................................................... 1 18822

6 GREASE FITTING..................................... 1 45010 32A FRONT STEEL Wear Plate .................... 1 340187 Not Offered (Replaced by 7A) (Requires O-rings)

7A STUFFING BOX (Split Packing) .............. 1 18835-T 32B O-RING, For Front Steel Wear Plate .... 1 25BC2058

8AOIL SEAL SOLID PACKING.....................SQUARE COMPRESSION Packing

3 or 41 Set

1155123541

32C O-RING, For Front/Rear Steel WearPlates...................................................... 2 25BC423

910

(5 pieces per set)LANTERN GLAND ....................................PACKING FOLLOWER, SOLID................

11

18828TUL18830

333435

STUD SUCTION ADAPTOR/VOLUTEGASKET, DISCHARGE..........................VOLUTE..................................................

811

TUL21904TUL3519418814

10A PACKING FOLLOWER, 2 PIECE ............. 1 18830-2P 36 PIPE PLUG ............................................. 1 15651

1111A

STUFFING BOX NUT, SOLID...................STUFFING BOX NUT, 2 PIECE ................

11

1883718837-2P

3738

PIPE PLUG .............................................IMPELLER, Counterclockwise .............

41

1565318824

1213

IMPELLER KEY.........................................IMPELLER SHAFT, SPLINED ..................

11

2516118826

3940

IMPELLER, Clockwise...........................REAR RUBBER COATED WEAR..........

11

1882318836

13A IMPELLER SHAFT, EXTENDED-KEY...... 1 18825 40A REAR STEEL WEAR PLATE.................(Requires O-Rings)

1 34017

14 DRIVE KEY................................................ 1 45116 40B O-RING, (for rear steel wear plate)....... 1 25BC347

15 OIL SEAL, INBOARD................................ 1 20098 41 STUD, REAR STEEL WEAR PLATE 2 2324516 FRAME CAP.............................................. 1 18821 42 FRAME.................................................... 1 1881017 SHIM .......................................................... 2 18832 43 MOUNTING BRACKET .......................... 1 TUL293581819

BEARING, Inboard double row ...............BEARING SPACER...................................

11

4530918831

44 STUD, MOUNTINGBRACKET/FRAME/VOLUTE ................. 3 TUL23248

2021

BEARING, Outboard Single Row............BEARING LOCK WASHER ......................

11

560923136

45 GASKET, HYDRAULICMOTOR/FRAME ..................................... 1 23494

22 BEARING LOCK NUT............................... 1 89702 46 STUD, VOLUTE/FRAME ........................ 5 2324623 O-RING ...................................................... 1 25AH26 47 LOCKNUT............................................... 4 44180700024 OIL SEAL RETAINER, OUTBOARD ........ 1 18833 48 STRAP .................................................... 2 1885525 SNAP RING, OUTBOARD ........................ 1 23145 49 BOLT STRAP/FRAME............................ 4 4511526 OIL SEAL, OUTBOARD............................ 1 16117 50 GREASE FITTING, (One Vented).......... 1 Set 3814027 GASKET, SUCTIION................................. 1 35264 51 LATCH (for Stuffing Box Cap).............. 1 TUL1949828 SUCTION ADAPTOR ................................ 1 TUL18820 52 SPRING................................................... 1 2386829 NUT............................................................ 4 39741 53 PIPE CAP................................................ 1 23015

Note:Assembly shown is Counterclockwise

Note:Assembly shown is Counterclockwise

Page 9: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASYMAINTENANCE.

A medium heavy weight, extremely rugged pump requiring minimal mounting space.

A heavy steel frame and mounting bracket for horizontal or vertical positioning.

The 10 x 12 features a keyed shaft drive system.

Segmented construction allows the customer to purchase only those parts necessary for repair.

Sacrificial front and rear wear plates are provided with every new pump. Rubber coated plates arenormally provided, although steel plates are available.

Change of rotation may be easily accomplished by simply removing, turning and repositioning thevolute, and changing the impeller to match the desired direction of rotation.

The dynamically closed pattern impellers are designed for moving heavy, abrasive laden slurries andare available in either clockwise or counterclockwise rotation. The impellers are secured to the shaftby a superior designed locking system.

We offer two packing choices. Solid lip seals provide efficient service with a minimum amount ofattention. Split compression is available for more severe conditions.

Bearings are double row inboard radial, and a single row outboard for axial thrusts.

Page 10: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

ORDER BYMODEL NUMBER

Explanation ofModel Number

10 DISCHARGE OPENING

12 SUCTIONOPENING

C IMPELLERC=ClockwiseCC=Counter-clockwise

S PACKINGS=SquareO=Oil Seal

R WEAR PLATESR=RubberS=Steel

K SHAFTK=Key Drive

RefNo. Name of Part Qty. Part No.

Ref.No. Name of Part Qty. Part No.

12345

5A67

7A8

8A

99A10

10A11

11A12131415161718192021222324252627

SET SCREW..............................................IMPELLER BOLT ......................................IMPELLER LOCK......................................BOLT (Throat Bushing/Stuffing Box) .....THROAT BUSHING (3-7/16 stuffing box)THROAT BUSING (3-1/2 stuffing box)....1/4 STRAIGHT ZERK FITTING.................STUFFING BOX (Square Packing)..........STUFFING BOX (oil Seal Packing) .........SQUARE COMPRESSION PACKING ......(5 Pieces Per Set)OIL SEAL SOLID PACKING.....................(5 Pieces per Set)LANTERN GLAND (3-7/16 Solid).............LANTERN GLAND (3-1/2 Solid)...............PACKING FOLLOWER, 2 PIECE .............PACKING FOLLOWER, SOLID................STUFFING BOX NUT, 2 PIECE ................STUFFING BOX NUT, SOLID...................IMPELLER KEY.........................................IMPELLER SHAFT....................................DRIVE KEY................................................SNAP RING, INBOARD ............................OIL RING RETAINER, INBOARD.............OIL SEAL, INBOARD................................BEARING, INBOARD DOUBLE ROW......BEARING, OUTBOARD SINGLE ROW ...BEARING LOCK WASHER ......................BEARING LOCK NUT...............................GASKET, ADAPTOR ................................HEAVY HEX STEEL NUT, 1/2 N.C ...........HEAVY HEX STEEL NUT, 5/8 N.C ...........SUCTION ADAPTOR ................................STUD (front wear plate/suction adapter)FRONT RUBBER WEAR PLATE..............

111611111

1 Set

1 Set

111111111111111118

24161

287755108781872975D583315440958450101872340955TUL21090

40959

TUL187354095718736-2P4095618725-2P18725TUL449651871645116TUL210891873260G4052124731021086TUL21085272922326023261TUL187172324618721

27A

27B27C2829303132333435

35A

35B

3637383940414243444546

47484950

FRONT STEEL WEAR PLATE...............(Requires O-Ring)O-RING (Front Steel Wear Plate)..........O-RING (Both Steel Wear Plates).........STUD, SUCTION Adapter/Volute..........GASKET, DISCHARGER .......................1/4 HEX STEEL PIPE PLUG ..................1/2 HEX STEEL PIPE PLUG ..................VOLUTE..................................................CCW IMPELLER (counterclockwise) ...CW IMPELLER, Clockwise....................REAR RUBBER COATED WEARPLATE.....................................................REAR STEEL WEAR PLATE.................(Requires O-Rings)O-RING BUNA N (Rear Steel WearPlate).......................................................STUD, REAR STEEL WEAR PLATE.....SET SCREW...........................................FRAME....................................................HEAVY HEX STEEL NUT, 3.8 N.C. .......MOUTING BRACKET.............................STUD, (bracket/frame/volute) ...............SHIM .......................................................FRAME CAP ...........................................OIL SEAL, OUTBOARD.........................HEX BOLT, FRAM CAP/FRAME ...........1/8 STRAIGHT ZERK FITTING ..............(One Vented)STUD, Volute/Frame..............................LATCH (For Stuffing Box Nut)..............SPRING...................................................1/2 PIPE CAP..........................................

1

12

12114111

11

12114142114

1 Set

8111

18777

187VUL25W8523253272931565116125187061870918708

1872218778

108515TUL2324823273TUL187123974118710232471873318727TUL18817655ED08038140

23252189802326823015

Note:Assembly shown is Counterclockwise

Page 11: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASYMAINTENANCE.

A medium heavy weight, extremely rugged pump requiring minimal mounting space.

A heavy steel frame and mounting bracket for horizontal or vertical positioning.

The 10 x 12 HD drive system features a keyed shaft. Also available is a special coupling andmounting bracket, which allows a hydraulic motor to be directly mounted to the pump.

Segmented construction allows the customer to purchase only those parts necessary for repair.

Sacrificial front and rear wear plates are provided with every new pump. Rubber coated plates arenormally provided, although steel plates are available.

Change of rotation may be easily accomplished by simply removing, turning and repositioning thevolute, and changing the impeller to match the desired direction of rotation.

The dynamically closed pattern impellers are designed for moving heavy, abrasive laden slurries andare available in either clockwise or counterclockwise rotation. A superior designed locking systemsecures the impellers to the shaft.

The 10 x 12 HD offers two packing choices. Solid lip seals provide efficient service with minimalamount of attention. Split compression type packing is available for more severe service conditions.

Bearings are double row inboard for radial thrusts, and a double row outboard for axial thrusts.

Page 12: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

ORDER BYMODEL

NUMBERExplanation ofModel Number

10 DISCHARGE OPENING

12 SUCTIONOPENING

C IMPELLERC=ClockwiseCC=Counter-clockwise

S PACKINGS=SquareO=Oil Seal

R WEARPLATESR=RubberS=Steel

K SHAFT

RefNo. Name of Part Qty. Part No.

Ref.No. Name of Part Qty. Part No.

1 SET SCREW.............................................. 1 28775 3030A

FRONT Rubber coated wear plate .......FRONT STEEL WEAR PLATE...............(Requires O-Rings)

11

1872118777

23

IMPELLER BOLT ......................................O-RING, BUNA N ......................................

11

58032287232

30B O-RING (Front Steel Wear Plate).......... 1 187VUL

45

O-RING, BUNA N ......................................IMPELLER LOCK......................................

11

25W1958146

30C O-RING (Both Steel Wear Plate)........... 2 25W85

6 1/4 STRAIGHT ZERK FITTING................. 1 45010 31 STUD (Suction Adaptor/Volute) ........... 12 232537 STUFFING BOX ........................................ 1 28723 32 GASKET, DISCHARGE.......................... 1 272938

8A

SQUARE COMPRESSION PACKING ......(5 Pieces Per Set)OIL SEAL PACKING.................................(5 Pieces Per Set)

1 Set

1 Set

28737

415304

3334

1/4 STEEL PIPE PLUG...........................1/2 HEX STEEL PIPE PLUG ..................

14

1565116125

910

LANTERN GLAND SOLID ........................PACKING FOLLOWER, 2 PIECE .............

11

2873528736-2P

3536

VOLUTE..................................................IMPELLER, Counter Clockwise............

11

1870618709

10A11

11A

PACKING FOLLOWER, SOLID................STUFFING BOX NUT, 2 PIECE ................STUFFING BOX NUT, SOLID...................

111

287362872528726

3738

IMPELLER, Clockwise...........................REAR RUBBER WEAR PLATE............

11

1870818722

12 O-RING, BUNA (Wear Sleeve) ................. 1 287149 38A REAR STEEL WEAR PLATE................. 1 187781314

HARDENED WEAR SLEEVE....................IMPELLER KEY.........................................

11

28715TUL44965

38B O-RING BUNA N ....................................(Rear Steel Wear Plate)

1 108515

1516

SLEEVE KEY.............................................IMPELLER SHAFT....................................

11

2876628716

3940

STUD (Rear Steel Wear Plate/Frame....SET SCREW...........................................

21

TUL2324823273

1718

DRIVE KEY................................................SNAP RING ...............................................

12

28764287525

4142

FRAME....................................................MOUNTING BRACKET ..........................

11

2871218710

19 OIL SEAL RETAINER ............................... 1 28732 43 STUD (mountingbracket/frame/volute) ............................ 4 23247

20 OIL SEAL, INBOARD................................ 1 2009755 44 SHIM ....................................................... 2 2873321 BEARING, Inboard double row ............... 1 5515 45 FRAME CAP ........................................... 1 2872722 BEARING, Outboard double row ............ 1 45612 46 LOCKWASHER ...................................... 6 4456110002324

BEARING LOCK WASHER ......................BEARING LOCK NUT...............................

11

W-12N-12

4748

OIL, SEAL, OUTBOARD........................HEX BOLT (FRAME CAP/FRAME)........

16

45031228770

2526

GASKET, SUCTION..................................HEAVY HEX NUT, 1/2N.C.........................

18

2729223260

49 1/8 STRAIGHT ZERK FITTING (OneVented) ................................................... 1 Set 38140

27 HEAVY HEX NUT, 5/8N.C......................... 24 23261 50 STUD (Frame/Volute) ............................ 8 2325228 SUCTION ADAPTOR ................................ 1 TUL18717 51 LATCH (FOR STUFFING BOX NUT) ..... 1 1898029 STUD (Front Wear Plate/Suction

Adapter) .................................................... 6 232465253

SPRING...................................................1/2 STEEL PIPE CAP.............................

11

2386823015

Note:Assembly shown is Counterclockwise

Page 13: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASYMAINTENANCE.

The 2045 LX features two flow dividers resulting in three throats positioned 120 apart which allowsfor a balance of thrust and forces and low radial loads, shortened flow path, development of fullpressure at 1/3 revolution of the impeller, distribution of wear at three points, the prevention of airentrapment and vapor lock, the reduction of shear and the improvement of viscosity handlingcharacteristics.

The GD 2045 LX drive system has a mounting adapter bracket predrilled to accept a direct drive SAEC two, of four bolt hydraulic motor, and in conjunction with our internal splined shaft eliminates

down time due to misalignment.

Simplistic construction requires less assembly time and less spare parts inventory.

The impeller design is fully open and ideally suited for handling fluids containing suspended solids.Impeller is available in an 8-vane pattern with a clockwise rotation.

The frame is available in two versions, economical cast iron and steel fabricated.

The GD 2045 LX offers two packing choices. Solid lip seals provide efficient service with a minimumamount of attention. Split compression type packing is available for more severe service conditions.

Bearings provide maximum radial and thrust load capacity and are protected by a water slinger.

Page 14: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

RefNo. Name of Part Qty. Part No.

Ref.No. Name of Part Qty. Part No.

12

GASKET DISCHARGE..............................SET SCREW..............................................

11

3519328775

17181920

BEARING, OUTBOARD Double row ....BEARING LOCK NUT ............................OIL SEAL, OUTBOARD.........................GASKET SUCTION ................................

1111

61116611176296135264

34

IMPELLER BOLT (Hex Design) ...............IMPELLER LOCK WITH ROLL PIN..........

11

5610256103

2121A*

VOLUTE..................................................MODIFIED VOLUTE/NOPEDESTALS WITH EX DRAIN ..............

1

1

5620LR

5620LR-SP5

5ASPLIT LIP SEAL PACKING RING ............OIL SEAL SOLID PACKING.....................

43 or 4

297955826

22*

1 PIPE PLUG ........................................1/2 PIPE PLUG .....................................

21

1752016125

6 LANTERN GLAND, 2 PIECE .................... 1 29797 23 GASKET, BACKHEAD........................... 1 247666A LANTERN GLAND, SOLID ....................... 1 29782 24 IMPELLER, 8 VANE ............................... 1 7481478

SQUARE COMPRESSION PKG. RING....PACKING FOLLOWER, 2 PIECE .............

11

29796TUL29811

2526

O-RING BACKHEAD..............................BACKHEAD............................................

11

1744926081

8A9

PACKING FOLLOWER, SOLID................KEEPER ....................................................

12

2978129812

2728

LUBE PIPE WITH CAP...........................RETAINING SCREW,SLINGER/SHAFT ...................................

1

1

14724

17522101112

HEX BOLT (Pkg. Follower/Backhead) ....BEARING, INBOARD SINGLE ROW........RETAINING RING, INBOARD...................

211

103284TUL5248052481

293031

SLINGER, 2 PIECE.................................FRAME, CAST........................................HEX BOLT, FRAME/VOLUTE................

11

12

29810TUL6296017515

13 IMPELLER KEY......................................... 1 26083 32 HEX BOLT, BEARINGCOVER/FRAME...................................... 4 17519

141516

SHAFT, INTERNAL SPLINED DRIVE ......GREASE ZERK .........................................RETAINING RING, OUTBOARD...............

111

610881751626035

3334

THRUST AJUSTMENT SCREW ............BEARING COVER & MOTORBRACKET...............................................

4

1

26029

26084

COUNTERCLOCKWISENote:Assembly shown is clockwiseNote:

Assembly shown is Counterclockwise

Page 15: GARDNER DENVER May, 2006 - Quincie Oilfield Products Gardner Denver/Centrifugal... · GARDNER DENVER DESIGN FEATURES GIVE LONG LIFE & EASY MAINTENANCE. A lightweight, compact, extremely

GARDNER DENVER CENTRIFUGALPUMP APPLICATIONS

OTHER GARDNER DENVERPRODUCTS

OILFIELD:

BLENDERSMIXERSCIRCULATIONSUPERCHARGINGDESANDINGTRANSFERWATER FLOODDISPOSAL WELLSWASHDOWN

INDUSTRIAL

SLURRYDESANDINGMIXINGTRANSFERFOOD PROCESSINGCHEMICAL PROCESSINGIRRIGATIONMINING

OTHER GARDNER DENVER SERVICES

OVERHAUL AND/OR REWORK OF:Damaged or worn out frac power frames, fluid ends,crossheads, or pressure headers, mudpumps,centrifugal and slurry pumps and 5- to 8- stagecentrifugal pumps, heat exchanger tube bundlewelding & refacing, etc. Our specialty Turn aroundwork.

MISCELLANEOUS MACHININGMILLING & BORINGTURNING (TO 42 DIA.)FABRICATIONWELDINGCOMPLETE FIXTURE & TOOLINGDEPARTMENTHYDROSTATIC & DESTRUCTIVE TESTFACILITYSHOT PEENING & STRESS RELIEVING75,000 P.S.I. AUTOFRETTAGE FACILITY

HIGH PRESSURE TRIPLEX PUMPS FORACIDIZING & FRACTURING

FEATURES:

STEEL FABRICATED POWER FRAME

SOLID ONE-PIECE CONNECTING ROD

PRECISION GROUND CROSSHEADS

FORGED ALLOW STEEL CRANKSHAFT

HIGH-GRADE ALLOY STEEL GEARS

FOUR MAIN ROLLER BEARINGS

ORIFICED LUBRICATION SYSTEM

LIGHTWEIGHT ALUMINUM COVERS

INTERCHANGEABLE PARTS/STOCK

HIGH PRESSURE FLUID ENDSFROM SOLID STEEL FORGINGS

FEATURES:

UNIFORMITY OF ALL INTERNAL SURFACES

ALL CORNERS CENEROUSLY REDIUSED

ALL BORES HAND POLISHED

SHOT PEENED

AUTORETTAGE CAPABILITY

CUSTON DESIGNES MAKE ON CONTRACT,

BASED UPON RECEIPT OF

SPECIFICATIONS AND DRAWINGS

STANDARD REPLACEMENT CAN BE PROVIDED

FOR MOST PUMPS ON THE MARKET

SPECIAL MATERIALS AND/OR SPECIFIC

MODIFICATIONS MAY BE

INCORPORATED INTO MOST STANDARD

DESIGNS

GARDNER DENVERPump Products4747 South 83rd East Ave. Tulsa, Oklahoma 74145(918) 664-1151 Out of State: (800) 637- 8099 Fax: (918) 664-6225Email: [email protected]