Gallus Playground Equipment

18
GALLUS PLAYGROUND EQUIPMENT

description

Playground Equipment of high quality with all the required certificates for outdoor public use.

Transcript of Gallus Playground Equipment

Page 1: Gallus Playground Equipment

GALLUS

PLAYGROUND EQUIPMENT

Page 2: Gallus Playground Equipment

What can possibly this Alpine resort, highland pine woods and a luxury yacht have in common?

Mirrored in its styling, the GALLUS playground equipment is produced just few miles walk from this romantic Bled resort middle in the Julian Alps by skillful hands of our craftsmen. The racks being built from the best of Alpine pinewood located in the mountain forests nearby, piece of wild nature is always appreciated by our young users. Manufactured side by side with bodies of some World's most excuisite yachts, our toboggans are made from the very same high quality materials.

Page 3: Gallus Playground Equipment

LET'S GO SWINGING

Swing GALLUS 1 Dimensions: 340cm x 100cm x 240cm Description: Metal framework with two seats, regular or adapted for small children. Made of hot dipped galvanized steel.

Swing GALLUS 2 Dimensions: 340cm x 12cm x 240cm Description: Metal framework with two seats, regular or adapted for small children. Made of hot dipped galvanized steel

Swing GALLUS 3 Dimensions: 415cm x 210cm x 240cm Description: Wooden pillars, metal bar with two seats (regular or adapted for small children). Made of impregnated wood, metal frame in hot dipped galvanized steel.

Page 4: Gallus Playground Equipment

TINKA Swing

Dimensions: 415cm x 210cm x 240cm Description: Made of impregnated wood and hot-dipped galvanized steel. Nylon rope basket.

FROGGY 1 Seesaw Dimensions: 310 cm x 36 cm x 980 cm Description: Wooden swing with metal handles. Made of impregnated wood and hot dipped galvanized steel. Seats of high-pressure laminate.

FROGGY 2 Seesaw Dimensions: 410 cm x 36 cm x 980 cm Description: Wooden swing with metal handles. Made of impregnated wood and hot dipped galvanized steel. Seats of high-pressure laminate.

Page 5: Gallus Playground Equipment

PONNY Suspension swing Dimensions: 75cm x 25cm x 80cm Description: Made of impregnated wood. Metal parts of hot dipped galvanized steel.

TONKA Suspension swing Dimensions: 75cm x 25cm x 80cm Description: Made of impregnated wood. Metal parts of hot dipped galvanized steel.

SANDPITS AND GAME TABLES

SAND GARDEN Dimensions: 126cm x 126cm x 32cm Description: Made of impregnated wood.

SAND GARDEN (covered) Dimensions: 126cm x 126cm x 200cm Description: Made of impregnated wood. Roof: fiberglass in polyester resin.

Page 6: Gallus Playground Equipment

SIX DWARFS Sandbox Dimensions: 252cm x 132cm x 32cm Description: Made of impregnated wood and fibergass in polyester resin. Seats: high-pressure laminate of high thickness.

PICNIC Game table

Dimensions: 122cm x 120cm x 50cm Description: Made of impregnated wood. Chairs or benches for kids optional.

SIX DWARFS Game table

Dimensions: 338cm x 305cm x 75cm Description: Made of impregnated wood.

»LITTLE SOMETHING« FOR QUICK HANDS AND FEET

SPEEDY CAPRICORN bridge

Dimensions: 360cm x 840cm x 102cm Description: Framework of impregnated wood. Chain hangers of hot dipped galvanized steel.

Page 7: Gallus Playground Equipment

MOUNTAIN ESCALADE climber Dimensions: 335 cm x 270 cm x 335 cm Description: Faremwork of impregnated wood. Metal parts are made from galvanized steel. Nylon climbing net.

ALPINIST climber Dimensions: 230cm x 120cm x 200cm Description: Framework of impregnated wood. Galvanized steel metal parts. Marine ladder: nylon rope and wooden bars. SPHYNX Climber Dimensions: 115cm x 120cm x 125cm (Optional for bigger climbing wall) Description: Made of impregnated wood. Holds in polyester resin. SECRET PASSAGE Tunnel Dimensions: 529cm x 313cm x 95cm Description: Composed of modular elements and immersed in the soil. Made of fiberglass in polyester resin.

Page 8: Gallus Playground Equipment

FREESTANDING Tunnel Dimensions: 129cm x 120cm x 120cm Description: Composed of two modular units and fixed on a wooden base. Made of fiberglass in polyester resin.

SLIDES AND TOWERS

MOUNTAIN slide

Dimensions: 325cm x 82cm x 196cm (small slide) 417cm x 94cm x 250cm (big slide) Description: Framework of impregnated wood. Slide of fiberglass in polyester resin. Metal parts of hot dipped galvanized steel.

TRIGLAV slide Dimensions: 460cm x 129cm x 330cm Description: Towers with stairs, ramp or climbing bars. Made of impregnated wood. Slide and roof of fiberglass in polyester resin. Entrance wall in high-presure laminate of high thickness. Metal parts of hot dipped galvanized steel.

Page 9: Gallus Playground Equipment

SECRET DESCENT Tower Dimensions: 598cm x 129cm x 330cm Description: Made of impregnated wood. Roof and slide of fiberglass in polyester resin. Entrance wall to slide in high-pressure laminate of high thickness. Metal parts of hot dipped galvanized steel.

CLIMBER RAMP Tower Dimensions: 598cm x 129cm x 330cm Description: Made of impregnated wood and fiberglass in polyester resin. Partition wall of high-pressure laminate. Metal parts of hot dipped galvanized steel.

SPIRAL Tower Dimensions: 487cm x 247cm x 435cm Description: Made of impregnated wood and fiberglass in polyester resin. Partition wall of high-pressure laminate. Metal parts of hot dipped galvanized steel.

Page 10: Gallus Playground Equipment

MAISONNETTE DE FOLLIES lodge Dimensions: 460cm x 492cm x 330cm Description: Tower with stairs, ramp or climbing bars. Made of impregnated wood. Roof and slide made of fiberglass in polyester resin. Entrance wall in high-pressure laminate of high thickness. Metal parts of hot dipped galvanized steel.

TRIGLAV Tower Dimensions: 460cm x 345cm x 330cm Description: Made of impregnated wood and fiberglass in polyester resin. Slide entrance wall in high-pressure laminate. Metal parts of hot dipped galvanized steel. Climbing net of nylon rope.

Page 11: Gallus Playground Equipment

GALLUS Tower Dimensions: 466cm x 696cm x 330cm Description: Combination of three different activities gives this tower some extra charm. Made of impregnated wood and fiberglass in polyester resin. Slide entrance wall in high-pressure laminate. Metal parts of hot dipped galvanized steel. Climbing net and basket of nylon rope.

MOUNTAIN FORTRESS Twin Tower Dimensions: 590cm x 403cm x 365cm Description: Combination of two or more climbing towers (optional). Each one can be combined with stairs ramp or climbing bars. Gateways between towers: tunnel, suspension bridge or climbing ramp. Made of impregnated wood and fiberglass in polyester resin. Partition wall in high-pressure laminate. Metal parts of hot dipped galvanized steel.

Page 12: Gallus Playground Equipment

SLIDE ELEMENTS Description: all elements are made of fiberglass in polyester resin Small Slide Large Slide D: 250cm x 47cm x 155cm D: 320cm x 56cm x 182cm

Tobbogan Tunnel Serpentine D: 367cm x 95cm x 235cm D: 370cm x 56cm x 210cm

Spiral D: 150cm x 260cm x 310cm

Page 13: Gallus Playground Equipment

SOME OTHER POSSIBLE COMBINATIONS

Page 14: Gallus Playground Equipment

REFERENCES Day care center Gorje, Slovenia

Page 15: Gallus Playground Equipment

Community playground, Litija, Slovenia

Page 16: Gallus Playground Equipment

Community playground, Lancovo, Slovenia

Page 17: Gallus Playground Equipment

Community playground, Medvode, Slovenia

Page 18: Gallus Playground Equipment