GALGAS DE ESPESORESGALGAS DE ESPESORES 3.780" .512" 6.772" 2.953" leaf.010 "está hecho de latón,...

1
4608-31 GALGAS DE ESPESORES 3.780" .512" 6.772" 2.953" leaf .010 "está hecho de latón, otros están hechos de aleación de acero endurecido Cada hoja está marcada con pulgadas / tamaño métrico 4608-31 Código .0015"~.035" Rango 32 Nº de hojas ±.00055" ±.00059" ±.00067" ±.00071" ±.00075" ±.00091" ±.00094" ±.00102" Precisión .016", .017" .018", .019" .020", .021" .022", .023" .024", .025", .026" .028" .030" .032", .035" Espesor de las hojas Espesor de las hojas .010" (brass) .0015", .002" .008", .009" .010", .011" .012", .013" .014", .015" .0025", .003", .004", .005", .006", .007" ±.00039" ±.0002" ±.00035" ±.00039" ±.00047" ±.00051" Precisión ±.00028"

Transcript of GALGAS DE ESPESORESGALGAS DE ESPESORES 3.780" .512" 6.772" 2.953" leaf.010 "está hecho de latón,...

  • Measure 45º chamfer dimensionGraduation .001"Made of stainless steelSatin chrome plated reading surface

    Measure 30º/45º/60º chamfer dimensionResolution .0005"/0.01mmButtons: on/off, zero, inch/mmAutomatic power off, move the digital unit to turn on powerBattery CR2032, data outputMade of stainless steelOptional accessory: data output cable (part no. 7306-20, 7302-SPC5A/SPC5B, 7305-SPC2A, 7305-A01/A02)

    1180-6

    DATAOUTPUT

    ELECTRONIC CHAMFER GAGES

    CHAMFER GAGE

    1267-02

    6.200"

    .630"

    .394"

    .950"

    45° .2

    36"

    measure 45º chamfer dimension

    external chamfer

    internal chamfer

    ELECTRONIC CHAMFER HEIGHT GAGE

    MADE IN GERMANY

    Measure outside or inside chamfer heightSuitable for diameter of bores ≥.236", chamfer angle ≥30° αResolution .0005"/0.01mmSetting gage is included

    3.9

    37"

    1.114"DIA

    setting gage (included)

    L: chamfer height

    α: chamfer angle

    R: reading of dial indicator

    L=R+b

    .0059"tanα

    b=

    principle of measurement

    α

    L

    b

    .0059"

    R

    2944-1

    1267-02

    Part No.

    0-.2"

    Range

    ±.003"

    Accuracy

    2944-1

    Part No.

    .008-.197"/0.2-5mm

    Range (L) Accuracy

    ±.0008"

    6.614"

    .63

    0"

    .591"

    .866

    "

    α

    measure chamfer dimension

    external chamfer

    internal chamfer

    ±.0025"

    Accuracy

    ±.0025"

    ±.0025"

    1180-6

    Part No.

    1180-63

    1180-66

    0-.39"/0-10mm

    Range

    0-.39"/0-10mm

    0-.39"/0-10mm

    45º

    Chamfer (α)

    30º

    60º

    114

    4608-31

    GALGAS DE ESPESORES 3.780"

    .512"

    6.772"

    2.953"

    leaf

    .010 "está hecho de latón, otros están hechos de aleación de acero endurecidoCada hoja está marcada con pulgadas / tamaño métrico

    4608-31

    Código.0015"~.035"

    Rango 32

    Nº de hojas

    ±.00055"

    ±.00059"

    ±.00067"

    ±.00071"

    ±.00075"

    ±.00091"

    ±.00094"

    ±.00102"

    Precisión

    .016", .017"

    .018", .019"

    .020", .021"

    .022", .023"

    .024", .025", .026"

    .028"

    .030"

    .032", .035"

    Espesor de las hojas

    Espesor de las hojas

    .010" (brass)

    .0015", .002"

    .008", .009"

    .010", .011"

    .012", .013"

    .014", .015"

    .0025", .003", .004",

    .005", .006", .007"

    ±.00039"

    ±.0002"

    ±.00035"

    ±.00039"

    ±.00047"

    ±.00051"

    Precisión

    ±.00028"

    11