GA COG RAKE BAR SCREEN. GA Cog Rake Bar Screen Channel width 1’-0” to 12’-0” Side frames...
-
Upload
eric-cummings -
Category
Documents
-
view
216 -
download
0
Transcript of GA COG RAKE BAR SCREEN. GA Cog Rake Bar Screen Channel width 1’-0” to 12’-0” Side frames...
GA COG RAKE BAR SCREEN
• GA Cog Rake Bar Screen
• Channel width 1’-0” to 12’-0”
• Side frames 3/8” x 25”
• Screen angle 60º to 85º
• Spacing 1/4” and up
• Max water level 9’-0”
• Cog Rake Bar Screen
• Replaceable rollers and bushings in hardened carbon steel or non-metallic
• Pins are 5/8” (GA, GB) or 3/4” (GBD) diameter bolts with locknut
• Cog wheel is an involute gear, pitch diameter of 10.822” (GA,GB) in hardened carbon steel, nickel plated or non-metallic
• GBD pitch diameter of 13.065” carbon steel only
• Steel gears for hardened GA & GB models are split for easy replacement
NON-LUBE SYSTEM
• Cog Rake Bar Screen
• Patented drive and guide roller system
• Lubrication not required
• Easily Replaceable
• Stainless steel pins
• Cog Rake Bar Screen
• Patented submersible drive system
• System is based on Boyle’s Law
• Rake arms are used as the air chamber
• Rugged polypropylene construction
• Excellent heat dissipation
• Easily removable
• Automatic condensate drain