G7SA Safety Relays, P7SA Sockets Certificates

18
omRon MRYT031 C Declaration of Conformity according to EN 45014 We, Omron Corporation, Industrial Automation Company Product Development Dept, Safety Devices Div. Shiokoji Horikawa, Shimogyo-ku, Kyoto 600-8530 Japan declare under our responsibility, that Products; All-or-nothing electrical relays [ G7SA-5A1B-QSK, G7SA-4A2B-QSK, G7SA-3A3B-QSK ] [ G7SA-3A1B-QSK, G7SA-2A2B-QSK ] are in conformity with following standards Electrical safety : DIN EN 61810-1(VDE 0435 T 201):1999-04 DIN EN 50205(VDE 0435 Teil 2022):2003-01 DIN EN 60255-23(VDE 0435 TeiI120):1997-03 EN61810-1:1998 EN50205:2002 EN 60255-23: 1996 Note: Condition of conformity are shown in the attached copy of VDE certificate No.125547 Kyoto Japan Date: at- 07 - ), cO G Shigeki Fujimoto Dept. Manager

Transcript of G7SA Safety Relays, P7SA Sockets Certificates

Page 1: G7SA Safety Relays, P7SA Sockets Certificates

omRonMRYT031 C

Declaration of Conformity

according to EN 45014

We, Omron Corporation,

Industrial Automation Company

Product Development Dept, Safety Devices Div.

Shiokoji Horikawa, Shimogyo-ku, Kyoto 600-8530 Japan

declare under our responsibility, that

Products; All-or-nothing electrical relays

[ G7SA-5A1B-QSK, G7SA-4A2B-QSK, G7SA-3A3B-QSK ]

[ G7SA-3A1B-QSK, G7SA-2A2B-QSK ]

are in conformity with following standards

Electrical safety :

DIN EN 61810-1(VDE 0435 T 201):1999-04

DIN EN 50205(VDE 0435 Teil 2022):2003-01

DIN EN 60255-23(VDE 0435 TeiI120):1997-03

EN61810-1:1998

EN50205:2002

EN 60255-23: 1996

Note: Condition of conformity are shown in the attached copy

of VDE certificate No.125547

Kyoto Japan

Date: at- 07 - ), cO G

Shigeki Fujimoto

Dept. Manager

Page 2: G7SA Safety Relays, P7SA Sockets Certificates

ie ungs" t

GUTACHTEN MIT FERTIGUNGSOSERWACHUNGCERTIFICATE OF CONFORMITY WITH FACTORY SURVBLLANCE

OMRON CorporationSafety Standards Group

lAB Technology DevelopmentShiokoji Horikawa

SHIMOGYO-KU, KYOTO 600-8530JAPAN

ist berechtigt, fOr ihr Produkt Iis authorized to use for their product

Elektromechanisches ElementarrelaisBectromechanical elementary relay

G7SA

die hier abgebildeten markenrechtlich geschotzten ZeichenfOr die ab Blatt 2 aufgefOhrten Typen zu benutzen I

the legally protected Marks as shown below for the types referred to on page 2 ff.

A REG.-Nr. 125547 oder/orA oder/or VD&REG.-Nr.125547

REG.-Nr. 125547

GeprOft und zertifiziert nach ITested and certified according to

DIN EN 61810-1 (VDE 0435 Tei! 201 ):2004-07; EN 61810-1 :2004

lEe 61810-1 :2004

DIN EN 50205 (VDE 0435 Tei! 2022):2003-01; EN 50205:2002

Blatt 1Page

VDE PrOf- und Zertifizierungsinstitut GmbHTesting and Certification Institute

~z~er ste~e I Certification

VDE Zertifikate sind nur g'ltig bei Verbffentlichung unter:VDE certificates are valid only when published on:

Aktenzeichen: 586103-4940-0709 / 115999File ref.:Ausweis-Nr. 125547Certificate No.Weitere Bedingungen siehe Ruckseite und Foigeblatter /further conditions see overleaf and following pages

Offenbach, 2000-01-04(Ietzte Anderung/updated 2009-04-21http://www.vde.com/zertifikathttp://www.vde.com/certificate

Page 3: G7SA Safety Relays, P7SA Sockets Certificates

Elektromechanisches ElementarrelaisElectromechanical elementary relayG7SA

Typ(en) / Type(s):

1] G7SA-5A1B-QSK (500 mW)2] G7SA-4A2B-QSK (500 mW)3] G7SA-3A3B-QSK (500 mW)4] G7SA-3A1B-QSK (360 mW)5] G7SA-2A2B-QSK (360 mW)6] G7SA-5A1B-QSK (580 mW)7] G7SA-4A2B-QSK (580 mW)8] G7SA-3A3B-QSK (580 mW)9] G7SA-3A1B-QSK (420 mW)10] G7SA-2A2B-QSK (420 mW)

Weitere Angaben siehe Anlage Nr.:100A; 200A-201A; 200B-201B; 200C; 200D; 300A-302A; 500E;500K; 1000

Further information see Appendix No.:100A; 200A-201A; 200B-201B; 200C; 200D; 300A-302A; 500E;500K; 1000

_____________________________________________________________________

VDE Prüf- und Zertifizierungsinstitut GmbHTesting and Certification InstituteFachgebiet FG31Section FG31

Ausweis-Nr. /Certificate No.

125547

VDE Prüf- und Zertifizierungsinstitut GmbH * Testing and Certification Institute_____________________________________________________________________Merianstrasse 28, D-63069 Offenbach Phone +49 (0) 69 83 06-0

Telefax +49 (0) 69 83 06-555

Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder

OMRON Corporation Safety Standards Group, IAB Technology Development, Center H.Q., ShiokojiHorikawa, SHIMOGYO-KU, KYOTO 600-8530, JAPAN

Aktenzeichen / File ref. letzte Änderung / updated Datum / Date

586103-4940-0709 / 115999 / FG31 / MIM 2009-04-21 2000-01-04

Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Gutachtens mit Fertigungsüberwachung Nr. 125547.This supplement is only valid in conjunction with page 1 of the Certificate of Conformity with factorysurveillance No. 125547.

Blatt /page

2

VDE Prüf- und ZertifizierungsinstitutGutachten mit Fertigungsüberwachung

Page 4: G7SA Safety Relays, P7SA Sockets Certificates

VOE-Reg.~Nr.:

1

GUlACHTEN MIT FERTIGUNGSUSERWACHUNG

CERTIFICATE OF CONFORMiTY WITH FACTORY SURVEiLLANCE

Aktenzelchen:File ref:586103·4940-01'09 .' 90178

Auswels-Nr.:Certificate No.:125547

DatumDate

2007·10·29

Elektromechanisches ElementarrelaisElectromechanical relay

Anlage-Nr.: inOAAppendix No.:

(NO =Schliel)er I Normally open contact; NC = Offner I Normally closed contact)

.5A1BII

5A1B=5xNO+1xNC

4A2B =4 x NO + 2 x NC

3A3B =3 x NO +3 xNC

3A1B=3xNO+1 xNC

2A2B = 2x NO+ 2x NC

G7SAJ

G7SA

TypenschlusselNomenclature

GrundtypeBasic series

KontaktartContact arrangement

II

VIII Optionale AngabenOptional suffix(es)

Blank - Standard

OSK- Maybe followed by additional letter (s) and/or number for safety standard or sales purpose. Does not affect construction

HefstellungscodeCode ofmanufacturer

25I

~II

04III

1;IV

\I

III

IV

lagD~JY

MonatMonth

JahrYear

Ort der HerstellungPlace of manufacturing

25.

3 =Marz I March

04 =2004

Omron lakeo

X ::: Oktober I October Y=November Z =Dezember / December

VOE Priif.. und ZertifizierungsinstitutDiese Anlage gilt nur in Verblndung rna Blatt 1 des Gutachtens mit FertigungsQberwachungThis Appendix is only valid in conjunction with page 1 of'the Certificate of Conformity with factory survei!1ance

VOE Prilf- und ZertifizierungsinstitutVOlE Testing and Certification Institute

l.A... '///~./.* ......•~..•..•. /~v-~"r;/ cT .",.. ...-

Fachgebiet FG33Section FG33

VDE

Page 5: G7SA Safety Relays, P7SA Sockets Certificates

To: Agilent Technologies.

OOlROnDate: August 30, 2011

Certification of RoHS Compliance

Company name:

Department:

Title:

Name:

Signature:

OMRON RELAY & DEVICES CO. TAKEO FACTORY.

PRODUCTION CENTER

PRODUCT ENGINEERING DEPT. PRODUCT ENGINEERING Gr.2

MANAGER

KUNIAKI KAWAHARA

--$,~w~

We hereby certify that to the best of Omron's knowledge, our products and components below

(including accessories and packing materials) which we supply do not contain the chemical

substances listed below at the time of shipment from the factory.

1. Chemical substances not contained:

(1) RoHS regulated six chemical substances

• Not contained means the following substances above the maximum concentration values in

homogeneous materials are not present in our products and components.

Substance Maximum Concentration Values

Lead 0.1 wt% (l,000 ppm)

Cadmium 0.01 wt% (100 ppm)

Mercury 0.1 wt% (l,000 ppm)

Hexavalent Chromium 0.1 wt% (1 ,000 ppm)

Poly Brominated Biphenyls (PBB) 0.1 wt% (1,000 ppm)

Poly Brominated Diphenyl Ethers (PBDE) 0.1 wt% (l ,000 ppm)

• These criteria are not applicable to the RoHS exempted items.

2. Applicable products, components:

Category Product Description Remarks

1 MAGNET RELAY G7SA-2A2B DC24 Production beginning in July 2005

Lot No. 0175E

DougB
Highlight
DougB
Highlight
DougB
Highlight
Page 6: G7SA Safety Relays, P7SA Sockets Certificates

No (TAKE)MSDS-118942-2 (1/1)Date: May 26, 2011

Company name: OMRON RELAY & DEVICECo. TAKEO FACTORYDepartment: PRODUCTION CENTER PRODUCT ENGINEERING DEPARTMENT

PRODUCT ENGINEERING GROUP2Name: Takashi Minematsu

- Note -

Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)Contain Quantity(g)Contain ratio(wt%)

To: OSTI.

・The SVHC is 46 substances which is published in Oct 2008, Jan 2010, Mar 2010, Jun 2010 andDec 2010.

・Numerical value indicates the quantity and contain ratio of substance which exceed 0.1%. The contain ratio (wt%) is divided on quantity(g) of SVHC in product weight(g).

10

11

12

13

9

1

2

3

6

7

Productweight(g)

containing SVHC

We are pleased to inform the situation of SVHC in the REACH regulation on our products or parts(including attached accessories, packaging materials) at the time of shipment from our factory, based onour collectable data.

22G7SA-2A2BDC24

No Producttypename

SVHCcontain/no-contain

・○ in the column of "SVHC contain/no-contain" indicates no-contain of SVHC which exceed of0.1%.

14

15

Reply sheet for REACH SVHC on our product or parts

4

5

8

DougB
Highlight
DougB
Highlight
Page 7: G7SA Safety Relays, P7SA Sockets Certificates

Switches, Industrial Control - Component

Accessory indicators, Model(s) M2P, followed by A or J, followed by N, followed by -57, followed by 0 thru 7, followed by 1 thru 7, followed by 05E, 12E, or 24E. (g)

Accessory mounting adapters, Model(s) Y92F-30 (c), Y92F-32, Y92F-33

Accessory rubber packings, Model(s) Y92S-29 (c), Y92S-32 (Packing, Front H7GP-C), Y92S-33 (Packing, Front H7HP)

Area sensors, Model(s) F5 (g)

Connector for photomicro sensors, Model(s) EE (g)

Contact block units, Model(s) A22-, followed by 01, 02, 10, 11 or 20, may be followed by S.

Counters, Model(s) H7CX followed by A or R, followed by 11, may be followed by 4, may be followed by S or W, may be followed by D1, followed by N. (c)

Counters, Model(s) H7CZ, followed by L, followed by 8, may be followed by D1. (c)

Counters, Model(s) H8BM-R, followed by A or B, may be followed by D. (c)

Counters/timers, Model(s) H8GN-AD (c), H8GN-ADFLK (c)

Dip timers, Model(s) H3FA, may be followed by S, followed by A or B, may be followed by U. (c)

Electro-magnetic relays, Model(s) G5CA, followed by -1A, may be followed by 4, may be followed by -TP, may be followed by -E, may be followed by -H or -L, may be followed by -HA, may be followed by additional letter(s) and/or number(s), followed by 3 V dc through 100 V dc for standard G5CA, or followed by 3 V dc through 60 V dc for G5CA with suffix -H, or followed by 3 V dc through 60 V dc for G5CA with suffix -L.

Electro-magnetic relays, Model(s) G6CN2, may be followed by D, may be followed by QSK1, may be followed by QSK2.

Electro-magnetic relays, Model(s) G6D-1A, may be followed by -ASI, may be followed by -AP, may be followed by additional letter(s) and/or number(s), followed by coil voltage. (a)

Electro-magnetic relays, Model(s) G6RN-1, may be followed by A, may be followed by additional letter(s) and/or number(s), may be followed by ANI, ASN, or ASI, may be followed by additional letter(s) and/or number(s), followed by 5 thru 48 V dc.

Electro-magnetic relays, Model(s) G7S3A1B (g), G7S3A3B (g), G7S4A2B (g), M2G-49011H1 (d), M2G-49011H2 (d), M2G-49014H1 (d), M2G-49014H2 (d)

Illuminated indicators, Model(s) M2KA701 (d), M2KJ701 (d), M2PA701 (d), M2PJ701 (d), M2PT701 (d)

Illuminated indicators, Model(s) M2S, followed by A or J, followed by 70 or 80, followed by 1 or 2. (d)

Illuminated push button switches for use in industrial control equipment, Model(s) A3C, followed by A, J or T, followed by 7, followed by 0 or 1, followed by 1 or 2, followed by 1 or 2. (g)

NRNT2.E41515 Switches, Industrial Control - Component

Page Bottom

See General Information for Switches, Industrial Control - Component

OMRON CORP E41515

SAFETY STANDARDS GROUP

IAB QUALITY & ENVIRONMENT DEPT

SHIOKOJI HORIKAWA, SHIMOGYO-KU

KYOTO, 600-8530 JAPAN

Page 1 of 10NRNT2.E41515 - Switches, Industrial Control - Component

10/17/2011http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

DougB
Text Box
See pg 7 of 11
DougB
Highlight
Page 8: G7SA Safety Relays, P7SA Sockets Certificates

Productivity monitors, Model(s) T P100, followed by A or B, may be followed by E or E1. (g)

Proximity sensors, Model(s) E2, TL (g), E3 (g)

Push button switches, Model(s) A3G, followed by a dot, followed by R, followed by three dots 05, 12 or 24.

Push button switches, Model(s) A3G-3011 (d), A3G-3111 (d)

Pushbutton switches, Model(s) A16, may be followed by 5, may be followed by L, followed by T, A, or J, followed by any letter; followed by M or A, may be followed by 5, 12, 24, 5D, 12D, 24D, T1 or T2, followed by 1, 2 or 11, may be followed by P, may be followed by up to 10 letters and/or numbers

Relay for non-industrial uses, Model(s) D2RV (g)

Relay for non-industrial uses, Model(s) G5NB1A, may be followed by 4, may be followed by E, may be followed by HA, may be followed by CB, may be followed by additional letter(s) and/or number(s), followed by coil voltage.

Relay for non-industrial uses, Model(s) G5T1A, may be followed by ASI, may be followed by additional letter(s) and/or number(s), may be followed by 5 to 24V DC.

Relay for non-industrial uses, Model(s) G6K, may be followed by U, followed by -2, followed by F, G or P, may be followed by -Y, may be followed by -3, may be followed by additional suffix(es), followed by 2 thru 24, VDC

Relay units, Model(s) G9SA, followed by 3 or 5, followed by 0 or 2, followed by 1, may be followed by T015 , T075, T15 or T30, may be followed by P. (g)

Relay units, Model(s) G9SA, may be followed by TH or EX, followed by 0, 2, 3 or 5, followed by 0, 2 or 3, followed by 0 or 1, may be followed by 1 or 2, may be followed by T015, T06, T075, T15 or T30. (g)

Relays, Model(s) G5PF-1A, may be followed by LN, may be followed by additional letter(s) and/or number(s), followed by coil voltage DC5 thru DC24.

Relays, Model(s) G7SA-2A2B (g), G7SA-3A1B (g), G7SA-3A3B (g), G7SA-4A2B (g), G7SA-5A1B (g)

Relays, Model(s) MK, followed by 1, 2 or 3, fiollowed by PN-UA, followed by AC-6 thru AC-260 or DC-6 thru DC-130. (g)

Relays, Model(s) MK, followed by 1, 2 or 3, followed by 05 or 10, may be followed by E, may be followed by P, may be followed by N, may be followed by 2 or 5, may be followed by -UA or -US, AC-6 thru AC-260 or DC-6 thru DC-130. (g)

Relays, Model(s) MK, followed by 1, 2 or 3, may be followed by E, followed by P, may be followed by 2, followed by -UAAC-6 thru -UAAC-260, or -UADC-6 thru -UADC-130. (g)

Relays, Model(s) MK, followed by 1, 2 or 3, may be followed by K, followed by P, may be followed by N, may be followed by E, may be followed by 2 or 5, followed by -US.

Relays, Model(s) MK, followed by 1ZP or 3ZP, may be followed by 2 or 5, followed by -UA or -US, may be followed by AC-6 thru AC-260 or DC-6 thru DC-130. (g)

Relays, Model(s) MK, may be followed by 1, 2 or 3, followed by -UA-06000 thru -006999.

Relays, Model(s) MKS, followed by 2 or 3 followed by P, may be followed by I, may be followed by N, may be followed by 1, may be followed by D or V, may be followed by 2 or 5. (g)

Rocker switches, Model(s) A8G10, followed by 1 thru 19, may be followed by 1 thru 9, may be followed by A thru X, may be followed by 05, 12 or 24.

Rotary encoders, Model(s) E6 (g)

Rotary timers, Model(s) H5CD, followed by A or L, followed by 8 or 11, may be followed by S, may be followed by D, may be followed by G. (c)

Rotary timers, Model(s) H5CL, followed by A, may be followed by D, may be followed by S. (c)

Rotary timers, Model(s) H5CX, followed by A or L, may be followed by 8 or 11, may be followed by S, may be followed by D, may be followed by G. (c)

Rotary timers, Model(s) H5RA, followed by 8 or 16, may be followed by P, may be followed by 1 thru 9. (c)

Rotary timers, Model(s) H7AN, may be followed by R, may be followed by W, may be followed by E, may be followed T, followed by 2, 4, 6 or 8, may be followed by D, may be followed by M. (c)

Page 7 of 10NRNT2.E41515 - Switches, Industrial Control - Component

10/17/2011http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

DougB
Rectangle
DougB
Rectangle
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Line
DougB
Line
Page 9: G7SA Safety Relays, P7SA Sockets Certificates

Types for use in industrial control equipment, Model(s) G2L-1 may be followed by 0 or 1, followed by 1, followed by 3 or 4, followed by P, may be followed by V, may be followed by E, followed by UA or US, may be followed by 1 or 5. (g)

Types for use in industrial control equipment, Model(s) G3K-2R2P, G3KD-YR2P-1, G3KD-YR2P-2, G3KD-YR2P-5, G3KD-YR2P-6, G3KD-YR2P-7

Types for use in non-industrial equipment only, relay, Model(s) G6J, may be followed by U, followed by -2, followed by FL, FS or P, followed by -Y, may be followed by -5 or -AN, may be followed by additional letter(s) and/or number(s), followed by 3 through 24VDC.

Ultrasonic sensors, Model(s) E4 (g)

# - Where # represents a letter/number or blank.

(a) - UL Recognized products must bear the Recognition mark.

(c) - May be followed by an additional number from 300 thru 999.

(d) - May be followed by a blank or up to six digits.

(g) - followed by up to 10 letter(s) and/or number(s).

* - When # is used, indicates that these characters do not duplicate any of the possible character combinations from other nomenclature items.

Marking: Company name or trademark , and catalog designation on the product or on the smallest unit container in which the product is packaged.

Copyright © 2011 Underwriters Laboratories Inc.®

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2011 Underwriters Laboratories Inc.®"

Last Updated on 2011-09-30

Questions? Print this page Notice of Disclaimer Page Top

Page 10 of 10NRNT2.E41515 - Switches, Industrial Control - Component

10/17/2011http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=...

DougB
Highlight
Page 10: G7SA Safety Relays, P7SA Sockets Certificates

Relay Sockets and Assemblies - Component

Type P2CF followed by 08 or 11, may be followed by E, may be followed by 600.

Type P3G followed by -08 or -11. Type P3GA-11.

Types PF-083A, -113A may be followed by -SA, -W, -W-T or -W-TD, may be followed by -E, may be followed by additional letters and/or numbers.

Type 8, 11 or 14 followed by PF, followed by A, may be followed by -SA, -W, -W-T or -W-TD.

Type 8PFA1 may be followed by -SA, -W, -W-T or -W-TD.

Type P6B, followed by -04P, -04PW, -06P or -26P, may be followed by suffix letters and/or numbers.

Types PL08, -11, PLE08-0, -11-0.

Types PY08, PYF08A for use with Type MY2 Series relays. Types PY11, PYF11A for use with Type MY3 Series relays. Types PY14, PYF14A for use with Type MY4 Series relays. Socket Types PY may be followed by 08, 11 or 14, may be followed by a blank, -0 or -02, may be followed by a blank or -Y1, may be followed by additional letters and/or numbers. Socket Types PYF may be followed by 08, 11 or 14, may be followed by A, may be followed by a blank, -V, may be followed by a blank, -W, may be followed by a blank, -E or -TU, may be followed by -N, may be followed by additional letters and/or numbers. Types PYF-11A, -11N for use with Type MY-3 relays. Types PYF14A, -14N for use with Type MY-4 relays, may or may not be followed by -US. Types PYF08A-E, -11A-E, -14A-E.

Type P2RF, followed by -05 or -08, may be followed by -E, may be followed by additional letters and/or numbers; Type P2RF, followed by -05 or -08, followed by S, may be followed by additional letter(s) and/or number(s).

Types PTF08A-E, -081, -11A-E, -14A-E, -111, -141 for use with Type LY Series relays. Types PT08, -08-0, -11, -11-0, -14, -14-0.

Socket Type PTF may be followed by a blank, 08, 11, 14, followed by A, may be followed by a blank, -V, may be followed by a blank, -W, may be followed by a blank, -E, -TU, may be followed by additional suffix letters and/or numbers.

Socket Type PT may be followed by 08, 11 or 14, may be followed by a blank, -0, may be followed by additional suffix letters and/or numbers.

Type P2R, followed by -05 or -08, followed by A or P, may be followed by additional letter(s) and/or number(s).

Type P6C, followed by 06 or 08, followed by C or P, may be followed by additional letters and/or numbers.

Type P6D, followed by -04P, may be followed by additional letters and/or numbers.

Type P6DS, followed by -04P, may be followed by additional letters and/or numbers.

Type P7S, followed by 14, followed by A, F or P, may be followed by a letter(s) and/or number(s). This Type of Relay socket will be marked with the UL R/C mark.

Type P7S, followed by 14, followed by F or P, followed by E, may be followed by ND, may be followed by a letter(s) and/or number(s).

Type P7SA, followed by 10 or 14, followed by F or P, may be followed ND, may be followed by letters and/or numbers.

SWIV2.E87929 Relay Sockets and Assemblies - Component

Page Bottom

See General Information for Relay Sockets and Assemblies - Component

OMRON CORP E87929

SAFETY STANDARDS GROUP

IAB QUALITY & ENVIRONMENT DEPT

SHIOKOJI HORIKAWA, SHIMOGYO-KU

KYOTO, 600-8530 JAPAN

Page 1 of 2SWIV2.E87929 - Relay Sockets and Assemblies - Component

9/9/2011http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=S...

DougB
Highlight
DougB
Rectangle
DougB
Highlight
DougB
Line
DougB
Line
DougB
Line
Page 11: G7SA Safety Relays, P7SA Sockets Certificates

Type P7TF(+), followed by -05, may be followed by -TV, may be followed by suffix letters and/or numbers. Coil lamp assemblies Type P70A(+), P70D(+).

Type P7LF, followed by -06, -06D or -D, may be followed by suffix letters and/or two numbers.

Type PYF, followed by 08 or 14, followed by S, may be followed by additional letters and/or two numbers.

Type PYF, followed by 08 or 14, followed by B, may be followed by additional letters and/or numbers.

Type G2RV Series followed by SL, followed by 700, may be followed by additional letters and/or numbers, followed by 12VDC, 24VDC, 48VDC, 24VAC/DC, 48VAC/DC, 110VAC or 230VAC.

Type G3RV, followed by SL, followed by 700, may be followed by additional letters and/or numbers, followed by 12VDC, 24VDC, 24VAC/DC, 48VAC/DC, 110VAC or 230VAC.

Type G2RV, followed by SL, followed by 500, may be followed by additional letters and/or numbers, followed by 12VDC, 24VDC, 48VDC, 24VAC/DC, 48VAC/DC, 110VAC or 230VAC.

Relay Socket, Type G3RV, followed by SL, followed by 500, may be followed by additional letters and/or numbers, followed by 12VDC, 24VDC, 24VAC/DC, 48VAC/DC, 110VAC or 230VAC.

Type P7M, followed by -06, followed by P, may be followed by additional letters and/or numbers for sales purposes.

Type P7MF followed by -06, may be followed by -D, may be followed by additional letter(s) and/or number(s).

Relay socket and relay combination, Type G6C followed by -2 or -4, followed by B, may be followed by N, may be followed by D, may be followed by additional letters and/or numbers.

Relay socket and motor controller combination, Type G6B followed by -4 or -47, may be followed by F, followed by B, B1 or P, may be followed by N, may be followed by D, may be followed by -01, may be followed by additional letters and/or numbers.

Relay socket and motor controller combination, Type G3DZ or G6D, followed by F4B, may be followed by additional letters and/or numbers.

(+) These products are to be provided with the Recognized Mark and if not provided with the Recognized Mark, the product is not UL Recognized.

Marking: Company name or "OMRON" and type designation on device or carton.

Copyright © 2011 Underwriters Laboratories Inc.®

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2011 Underwriters Laboratories Inc.®"

Last Updated on 2011-01-31

Questions? Print this page Notice of Disclaimer Page Top

Page 2 of 2SWIV2.E87929 - Relay Sockets and Assemblies - Component

9/9/2011http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/showpage.html?name=S...

DougB
Highlight
Page 12: G7SA Safety Relays, P7SA Sockets Certificates

Solid state relays, Model G3DZ with suffixes, open type, encapsulated, ratings as follows: Input 5-24V dc. Ratings: Input: 5-24V dc or 6.25mA dc Output:

Relay type G7T-1122S rated 1A, 250V ac (general), 5A, 30V dc (general), 1/10 hp, 120V ac, 10mA, 24V dc. Relay Type G7T-1112S rated 5A, 250V ac (general), 10A, 250V ac (general), 10A, 30V dc (resistive), 1/2 hp, 240V ac, 5A, 125V dc (resistive). (55C ambient) Coils rated 6 to 240V ac, 6 to 125V dc. Input/Output terminal devices, Type P79C (with suffixes) (55C ambient) rated as follows:

Certification Record

CUSTOMER CLASS FILE

Omron Electronics LLC 3211-07 035535_0_000

One Commerce Dr,INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus

SchaumburgIL60173USA Refer to Class Description for program details

Cat No RatingsG3DZ-2R6PL 240V ac, 0.6A; 125V dc, 0.6A, resistive load

240V ac, 0.6A; 125V dc, 0.6A, general use 240V ac, 0.3A; 125V dc, 0.3A, tungsten 240V ac, 0.16A FLA, 1.0A, LRA, motor

G3DZ-2R6PLG 264V ac, 0.6A; 125V dc, 0.6A, resistive load264V ac, 0.6A; 125V dc, 0.6A, general use 264V ac, 0.3A; 125V dc, 0.3A, tungsten 264V ac, 0.16A FLA, 1.0A, LRA, motor

G3DZ-1R5PL 100V ac, 0.5A; 100V dc, 0.6A, resistive load 100V ac, 0.5A; 100V dc, 0.6A, general use 100V ac, 0.25A; 100V dc, 0.25A, tungsten 100V ac, 0.25 A FLA, 1.5A LRA, motor

G3DZ-IR5PLG 125V ac, 0.5A; 100V dc, 0.6A, resistive load125V ac, 0.5A; 100V dc, 0.6A, general use 125V ac, 0.25A; 100V dc, 0.25A, tungsten 125V ac, 0.25 A FLA, 1.5A LRA, motor

G3DZ-DZ02P 24V dc, 2.0A, resistive load 24V dc, 2.0A, general use 24V dc, 1.0A, tungsten 24V dc, 1.0A FLA, 6.0A LRA, motor

G3DZ-DZ02PG 26.4V dc, 2.0A, resistive load26.4V dc, 2.0A, general use 26.4V dc, 1.0A, tungsten 26.4V dc, 1.0A FLA, 6.0A LRA, motor

Page 1 of 18

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

DougB
Text Box
See page 13 of 18 for G7SA Relays
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
Page 13: G7SA Safety Relays, P7SA Sockets Certificates

Relays, open type, Cat Nos G7SA-5A1B, G7SA-4A2B, G7SA-3A3B, G7SA-3A1B, G7A-2A2B, rated 6A (res), 250V ac/30V dc (85°C ambient); B300 (50,000 operations) and R300 pilot duty, (100,000 operations and 85°C ambient). Coil rated 12V dc, 18V dc, 21V dc, 24V dc or 48V dc. Relays, open type, Cat Nos.G7SA-5A1B, G7SA-4A2B, G7SA-3A3B, G7SA-3A1B, G7SA-2A2B, rated 6A (res), 250V ac/30V dc (60°C ambient); B300 (50,000 operations) and R300 pilot duty, (100,000 operations and 60°ambient). Coil rated 110V dc. Transistor Remote I/O terminals, open type, as follows: Models DRT1-ID16T and DRT1-16T-1 with suffixes, transistor remote input terminal, rated 24V dc, 6mA max per point (16 points).

Models DRT1-OD16T and DRT1-OD16T-1 with suffixes, transistor remote output terminal, rated 24V dc, 0.5A per point (16 points).

Models DRT1-MD16T and DRT1-MD16T-1 with suffixes, transistor input/output terminal, rated 24V dc, 6mA max/0.5A per point (16 points).

Models DRTI-ID32ML and DRT1-ID32ML-1 with suffixes, transistor remote input terminal, rated 24V dc, 6mA max per point (32 points).

Models DRT1-OD32ML and DRT1-OD32ML-1 with suffixes, transistor remote output terminal, rated 24V dc, 0.3A per point (32 points).

Models DRT1-MD32ML and DRT1MD32ML-1 with suffixes, transistor remote input/output terminal, rated 24V dc, 6mA max/0.3A per point (32 points).

Relay socket, open type, Type P7SA with suffixes, rated 6A maximum per pole, 20A total, 288V ac. Remote Terminals open type, Type SRT2 with suffixes Remote terminals, open type, type SRT2 with suffixes: Models SRT2-ID32ML with suffixes, transistor remote input terminal, rated input 24V dc, output 24V dc, 6mA max/point. Models SRT2-OD32ML with suffixes, transistor remote output terminal, rated input 24Vdc, output 24V dc, 0.3A/point. Models SRT2-MD32ML with suffixes, transistor remote input/output terminal, rated input 24V dc, output 24V dc, 6mA max/point, 0.3A/point. Safety relay, open type, Model G9SA-300-CS with suffixes, rated 5A (res), 250V ac, B300 and R300, control 24V dc; or 100-240V ac. Solid state relays, open type, Rated source 24V dc, input - 12V dc; Alarm output-24V dc, 100mA Power output as follows: Cat No G3PB-C210B with suffixes, rated 100 to 240V ac, 10A general-use, 10A tungsten, 20LRA, 5FLA. Cat Nos G3PB-C220B and G3PB-C220B-2 with suffixes, rated 20A general-use, 20A tungsten, 40LRA, 10FLA. Solid state relays, open type, Cat No G3PC-220B with suffixes, rated input 12-24V dc; output 100 to

Model Rated input Output rating G70D-VSOC16 24V dc 3A (res), 250V ac/30V dc G70D-VFOM16 24V dc 0.3A, 3-264V dc/3-125V dcG70D-SOC08 24V dc 5A (res.), 250V ac/30V dcG70R-SOC08 24V dc 3A (res.), 250V ac/30V dc

G7D-VZOM16 24V dc (No output relay provided, sockonly)

G70D-ZOM08 24V dc (No output relay provided, sockonly)

G7R-ZOM08 24V dc (No output relay provided, sockonly)

Page 13 of 18

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

richp
Highlight
richp
Highlight
DougB
Line
DougB
Line
DougB
Highlight
DougB
Rectangle
Page 14: G7SA Safety Relays, P7SA Sockets Certificates

Model G3PE-525B-2H, 525B-3H rated 200 to 480V ac, 50/60Hz, 6A General-use & Tungsten#; 2A General-use & Tungsten**.

Model G3PE-535B-2H, 535B-3H rated 200 to 480V ac, 50/60Hz, 8A General-use & Tungsten*; 2A General-use & Tungsten**.

Model G3PE-545B-2H, 545B-3H rated 200 to 480V ac, 50/60Hz, 8A General-use & Tungsten*, 2A General-use & Tungsten**.

Notes:

1. Output supply wires shall be rated at least 105°C for all 3-phase devices and G3PE-535BL.

2. *: 25°C ambient ratings; #: 40°C ambient ratings; **: 80°C ambient ratings.

/sp

Copyright © 2010 CSA International. All rights reserved.

Page 18 of 18

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

Page 15: G7SA Safety Relays, P7SA Sockets Certificates

Solid state relays, Model G3DZ with suffixes, open type, encapsulated, ratings as follows: Input 5-24V dc. Ratings: Input: 5-24V dc or 6.25mA dc Output:

Solid state relays, Type G3M series, with Suffix -US, open type; with Suffix 102 rated 2A, 125V ac (Res.), 250W, 125V ac (Tung.), 2 FLA, 12 LRA, 125V ac; with Suffix 202 rated 2A, 250V ac (Res.), 500W, 250V ac (Tung.), 2 FLA, 12 LRA, 250V ac; with suffix 105 rated 5A, 125V ac, 625W(tungsten), 125V ac, 2.5FLA, 15LRA, 125V ac; with suffix 205 rated 5A, 250V ac, 1250W(tungsten), 250V ac, 2.5Fla, 15FLA, 15LRA, 250V ac. Solid state relays, Type G3M series, with Suffix -UTU rated input 5, 12 and 24V dc, output with

Certification Record

CUSTOMER CLASS FILE

Omron Electronics LLC 3211-87 035535_0_000

One Commerce Dr,INDUSTRIAL CONTROL EQUIPMENT-Miscellaneous Apparatus - Certified to US Standards

SchaumburgIL60173USA Refer to Class Description for program details

Cat No RatingsG3DZ-2R6PL 240V ac, 0.6A; 125V dc, 0.6A, resistive load

240V ac, 0.6A; 125V dc, 0.6A, general use 240V ac, 0.3A; 125V dc, 0.3A, tungsten 240V ac, 0.16A FLA, 1.0A, LRA, motor

G3DZ-2R6PLG 264V ac, 0.6A; 125V dc, 0.6A, resistive load264V ac, 0.6A; 125V dc, 0.6A, general use 264V ac, 0.3A; 125V dc, 0.3A, tungsten 264V ac, 0.16A FLA, 1.0A, LRA, motor

G3DZ-1R5PL 100V ac, 0.5A; 100V dc, 0.6A, resistive load 100V ac, 0.5A; 100V dc, 0.6A, general use 100V ac, 0.25A; 100V dc, 0.25A, tungsten 100V ac, 0.25 A FLA, 1.5A LRA, motor

G3DZ-IR5PLG 125V ac, 0.5A; 100V dc, 0.6A, resistive load125V ac, 0.5A; 100V dc, 0.6A, general use 125V ac, 0.25A; 100V dc, 0.25A, tungsten 125V ac, 0.25 A FLA, 1.5A LRA, motor

G3DZ-DZ02P 24V dc, 2.0A, resistive load 24V dc, 2.0A, general use 24V dc, 1.0A, tungsten 24V dc, 1.0A FLA, 6.0A LRA, motor

G3DZ-DZ02PG 26.4V dc, 2.0A, resistive load26.4V dc, 2.0A, general use 26.4V dc, 1.0A, tungsten 26.4V dc, 1.0A FLA, 6.0A LRA, motor

Page 1 of 17

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

DougB
Text Box
See page 12 of 17 for G7SA Relays
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
DougB
Highlight
Page 16: G7SA Safety Relays, P7SA Sockets Certificates

Relays, open type, Cat Nos G7SA-5A1B, G7SA-4A2B, G7SA-3A3B, G7SA-3A1B, G7A-2A2B, rated6A (res), 250V ac/30V dc (85°C ambient); B300 (50,000 operations) and R300 pilot duty, (100,000operations and 85°C ambient). Coil rated 12V dc, 18V dc, 21V dc, 24V dc or 48V dc.

Relays, open type, Cat Nos.G7SA-5A1B, G7SA-4A2B, G7SA-3A3B, G7SA-3A1B, G7SA-2A2B, rated6A (res), 250V ac/30V dc (60°C ambient); B300 (50,000 operations) and R300 pilot duty, (100,000operations and 60°C ambient). Coil rated 110V dc.

Safety relay, open type, Model No. G9SA with suffixes, rated 5A(res), 250V ac, B300 and R300, control24V ac/dc or 100-240V ac.

Transistor Remote I/O terminals, open type, as follows: Models DRT1-ID16T and DRT1-16T-1 with suffixes, transistor remote input terminal, rated 24V dc,6mA max per point (16 points). Models DRT1-OD16T and DRT1-OD16T-1 with suffixes, transistor remote output terminal, rated 24Vdc, 0.5A per point (16 points). Models DRT1-MD16T and DRT1-MD16T-1 with suffixes, transistor input/output terminal, rated 24Vdc, 6mA max/0.5A per point (16 points). Models DRTI-ID32ML and DRT1-ID32ML-1 with suffixes, transistor remote input terminal, rated 24Vdc, 6mA max per point (32 points). Models DRT1-OD32ML and DRT1-OD32ML-1 with suffixes, transistor remote output terminal, rated24V dc, 0.3A per point (32 points). Models DRT1-MD32ML and DRT1MD32ML-1 with suffixes, transistor remote input/output terminal,rated 24V dc, 6mA max/0.3A per point (32 points).

Relay socket, open type, Type P7SA with suffixes, rated 6A maximum per pole, 20A total, 288V ac. Remote terminals, open type, type SRT2 with suffixes: Models SRT2-ID32ML with suffixes, transistor remote input terminal, rated input 24V dc, output 24V dc, 6mA max/point. Models SRT2-OD32ML with suffixes, transistor remote output terminal, rated input 24Vdc, output 24V dc, 0.3A/point. Models SRT2-MD32ML with suffixes, transistor remote input/output terminal, rated input 24V dc, output 24V dc, 6mA max/point, 0.3A/point. Solid state relays, open type, Cat No G3PC-220B with suffixes, rated input 12-24V dc; output 100 to 240V ac, 20A general-use, 20A tungsten, 40LRA, 10FLA; alarm output 24V dc, 100mA. Solid state relays, open type, Rated source 24V dc, input - 12V dc; Alarm output-24V dc, 100mA Power output as follows: Cat No G3PB-C210B with suffixes, rated 100 to 240V ac, 10A general-use, 10A tungsten, 20LRA, 5FLA. Cat Nos G3PB-C220B and G3PB-C220B-2 with suffixes, rated 20A general-use, 20A tungsten, 40LRA, 10FLA. Safety Relay unit, open type, Series CS1W-SF200 and CQM1-SF200; rated 5A(res), 250V ac; Control 24V dc. Relay-mounted remote terminal, open type, Cat No GT1-ROP08.

G70D-SOC08 24V dc 5A (res.), 250V ac/30V dc

G70R-SOC08 24V dc 3A (res.), 250V ac/30V dc

G7D-VZOM16 24V dc (No output relay provided, socket only)

G70D-ZOM08 24V dc (No output relay provided, socket only)

G7R-ZOM08 24V dc (No output relay provided, socket only)

Page 12 of 17

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

DougB
Highlight
DougB
Highlight
DougB
Line
DougB
Line
DougB
Highlight
DougB
Oval
DougB
Highlight
DougB
Rectangle
Page 17: G7SA Safety Relays, P7SA Sockets Certificates

Model G3PE-245B-2H, 245B-3H rated 100 to 240V ac, 50/60Hz, 8A General-use & Tungsten*, 2A General-use & Tungsten**.

Model G3PE-515B-2H, 515B-3H rated 200 to 480V ac, 50/60Hz, 5A General-use & Tungsten#; 2A General-use & Tungsten**.

Model G3PE-525B-2H, 525B-3H rated 200 to 480V ac, 50/60Hz, 6A General-use & Tungsten#; 2A General-use & Tungsten**.

Model G3PE-535B-2H, 535B-3H rated 200 to 480V ac, 50/60Hz, 8A General-use & Tungsten*; 2A General-use & Tungsten**.

Model G3PE-545B-2H, 545B-3H rated 200 to 480V ac, 50/60Hz, 8A General-use & Tungsten*, 2A General-use & Tungsten**.

Notes:

1. Output supply wires shall be rated at least 105°C for all 3-phase devices and G3PE-535BL.

2. *: 25°C ambient ratings; #: 40°C ambient ratings; **: 80°C ambient ratings.

Notes:

1. Open type devices are Certified as components for use only in other Certified equipment where the suitability of the combination is to be determined by the CSA International.

2. Surrounding Air Temperature Rating: 55°C Maximum

/sp

Copyright © 2010 CSA International. All rights reserved.

Page 17 of 17

11/24/2010http://directories.csa-international.org/xml_transform.asp?xml=certxml\035535_0_000-3...

Page 18: G7SA Safety Relays, P7SA Sockets Certificates

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

Authorized Distributor:

C298I-E-01 10/11 Note: Specifications are subject to change. © 2014 Omron Electronics LLC Printed in U.S.A.

Printed on recycled paper.

Automation Control Systems• Machine Automation Controllers (MAC) • Programmable Controllers (PLC) • Operator interfaces (HMI) • Distributed I/O • Software

Drives & Motion Controls • Servo & AC Drives • Motion Controllers & Encoders

Temperature & Process Controllers • Single and Multi-loop Controllers

Sensors & Vision• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors• Amplified Photomicrosensors • Measurement Sensors• Ultrasonic Sensors • Vision Sensors

Industrial Components • RFID/Code Readers • Relays • Pushbuttons & Indicators• Limit and Basic Switches • Timers • Counters • Metering Devices • Power Supplies

Safety • Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety Controllers • Light Curtains • Safety Relays • Safety Interlock Switches

OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu