G3 Fax SKIPPER™ 150 FleetBroadband (FB)The SKIPPER™ 150 FleetBroadband (FB) satellite...
Transcript of G3 Fax SKIPPER™ 150 FleetBroadband (FB)The SKIPPER™ 150 FleetBroadband (FB) satellite...
-
G3 Fax
SKIPPER™ 150 FleetBroadband (FB)
Ver : 1.0
Date : 31 July 2012
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 2
Contents Introduction 3
Product Overview 3
General Feature 4
Technical Setup 5 - 6
Technical Specification 7 - 8
Ordering Information 9
Contact Detail 9
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 3
Introduction
The purpose of this document is to be circulated to the Distributors of Addvalue Communications on the new G3 Fax service for SKIPPER™ 150.
Product Overview
The SKIPPER™ 150 FleetBroadband (FB) satellite communications terminal is designed to focus on small and mid-sized commercial marine, fishing and leisure vessels. Its high performance makes communications easier for the Captains and crew members to talk, SMS, fax and email around the world. With a fast data speed of 150kbps, you can now receive full colour weather images, navigational charts, maintenance information and browse the internet with ease. In addition, you are now able to send reports, regulatory and management information via the internet while simultaneously making phone calls or sending faxes.
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 4
General Feature
The G3 Fax is a newly launched service from Inmarsat for SKIPPER™ 150 (Class 14 FleetBroadband). Beside voice, fax is an essential and important service for fishing vessels. For fishermen, it is the basic communication tool for sending catch reports and communicating to their headquarters. The Fax service for SKIPPER™ 150 will only be functional upon activation. To enable this service, an Activation PIN number is required and has to be purchased from Addvalue Communications Pte Ltd. The G3 Fax service is only applied to SKIPPER™ 150 firmware (FW) version 1.6.1 or higher. For existing customers with older FW version, it is a mandatory to upgrade it.
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 5
Technical Setup
** Please refer to G3 Fax Application Notes for detailed Technical Setup.
Activating of G3 Fax Service
Ensure that the FW version is 1.6.1 or higher and you have obtained the Activation PIN number. Proceed to enable and activate the G3 Fax service. Login to the web console and navigate to Settings>Admin>Feature to activate the G3 Fax service. Enter the activation PIN of 16 characters purchased from Addvalue Communications and click the “Activate” button.
Rebooting of the terminal is required for the Fax service to take effect.
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 6
Port Configuration Navigate to Telephony>Port Configuration. By default, the settings for the RJ11 port (before fax service is activated) are configured as follows: - Incoming Call: Standard voice call - Outgoing Call: Standard voice call Upon the fax service is activated, the service type of Incoming Call will automatically change to “3.1 kHz high quality voice/fax call” (as illustrated below). Service type for Outgoing Call remains as “Standard voice call”.
Warning: Usually, it is uncommon for user to use the 3.1 kHz high quality voice to make outgoing voice call as the cost for high quality voice is so much higher than the standard voice call.
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 7
Technical Specification
Inmarsat FleetBroadband Type Approval
Compliant to R&TTE, IEC60945:2000
Certification mark : FCC, CE, IC
Green Passport
BDU – ADU RF Cabling max loss 12dB at 1.6GHz and 4ohm DC loop resistance
Services
Voice 4kbps AMBE+2
Fax 3.1kHz high quality audio (64kbps)
Standard IP Up to 150kbps
SMS Up to 160 character (3G standard)
Larger SMS Content Support as multipart or segment SMS
Router Functions
Single User Router Mode (Modem Mode) NAT disabled, with option to enable/disable DHCP
Multi-User Router Mode NAT enabled, with option to enable/disable DHCP
Interfaces
1 x Ethernet Port (RJ45 with PoE) SIM Card Slot
1 x Standard Phone Port (RJ11) for phone 4 x Status indicator LEDs
Primary Handset connector (RJ45) Power ON/OFF switch
GPS output connector (NMEA-1083) DC Power Input socket
Antenna Connector :BDU: TNC female ADU: N-Type female
Environmental Conditions
BDU:
Operating Temperature -25ºC to +55ºC
Storage Temperature -40ºC to +80ºC
Operating Humidity 95% non-condensing at +40ºC
Ingress Protection IP44
ADU:
Operating Temperature -25ºC to +55ºC
Storage Temperature -40ºC to +80ºC
Operating Humidity 95% non-condensing at +40ºC
Ingress Protection IP56
Power Supply
DC Input (isolated) +10.8V to +31.2V
Power (max) 100W including antenna
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 8
Physical Data
Dimension
297 x 228 x 77mm
BDU 11.7 x 9.0 x 3.0in
294 (Dia) x 228mm (H)
ADU 11.6in (Dia) x 9.0in (H)
Weight
BDU 2.8Kg/ 6.2lbs
ADU 2.0Kg/ 4.4lbs
Primary Handset
Display 2in, 220 x 176 pixel TFT, 65K Colour LCD
Dimension 142 x 56 x 22mm (5.6 x 2.2 x 0.9in)
Weight 390g / 0.8Ibs
Protection Class IP56
Operational Temperature -20ºC to +55ºC
Storage Temperature -30ºC to +70ºC
Configuration setting
Phone book access
Call log function
SMS Messaging 5-way menu navigation switch for user-friendly menu operation
Feature Highlight Hands free operation via plug-in operation
-
G3 Fax – SKIPPER 150 FleetBroadband (FB)
© Addvalue Communications Pte Ltd 9
Ordering Information
Please contact the Sales Department at [email protected] for the price of this G3 Fax feature.
Contact Detail
Email: [email protected] Phone: +65 6509 5700 Web: http://www.wideye.com.sg
Description Order Code
Fax PIN Number SK15-0SG00-01