Fusion Catalog

53
[email protected] 800-543-4424

description

catalog of Fusion furniture

Transcript of Fusion Catalog

Page 1: Fusion Catalog

[email protected]

800-543-4424

 

Page 2: Fusion Catalog

1

Copyright 2011, Techno-Aide, Inc., all rights reserved.

Index inside back cover

FUSION Ergonomic Desks 2-19

Monitor Supports 20-23

Wallmount & Mobile Workstations 24-27

Desk & Workstation Accessories 28-33

Laptop Solutions 34-35

Department Workspaces 36-45

Digital Support Carts 46-47

Chairs & Seating 48-51

Contents

Page 3: Fusion Catalog

2

FUSION (Blending Body, Work & Motion)

Introducing

programmable switch upgrade

Crank handle is removed andstored when not in use.

Divided Surface Lift

Divided Surface Lift

The blueprint to comfort and efficiency beginswith a design that fits your needs.

Techno-Aide’s dynamic FUSIOn line of ergonomic furniture solutions features:

• electric and manual height adjustable desks• expanded range of standard configurations • customized work surfaces• design services to optimize your space

For over 40 years your support has led to our success. Our FUSIOn line is designed for your success.

Divided Surface Lift (DSL)The DSL provides an extended work surfacethat can be raised or lowered from theprimary desk surface, to position the frontwork surface at the optimal level for eachunique user.

Desks shown with the DSL include the deskbase, specially cut desktop, the DSLworksurface and the DSL mechanism.

The DSL mechanism is easily adjusted andlocked with one lever, so no electricity isrequired.

For specially cut corner desks, the DSL mustbe part of the initial order. However, if youhave a work surface with an undivideddesktop and wish to replace that with a DSLdesktop in the future, a new desktop withDSL can be ordered and mounted onto yourexisting base unit.

Primary Work SurfaceThe Primary Work Surface can be raisedor lowered to position the desktop at theoptimal level for each unique user.

There are two basic types of elevatingmechanisms that operate within thestructural steel support posts: electric andmanual crank.

The electric lift allows the user to raise andlower the desktop with the simple push of abutton. A nearby 120VAC outlet is all thatis required.

The crank lift allows the user to easily raiseand lower the desktop with theEZ-Crank knob conveniently located on thedesktop. The two benefits with choosingthe crank are that no electricity is requiredand the crank desktop provides all thefunction of the electric model atsignificant cost savings.

Ergonomic Desk FeaturesAll desks presented in this catalog includethe base as listed (electric or manual crank)and the work surface as shown.

The standard color is black base with amatte black desktop and trim, but otherchoices are available as shown on page 19.Custom designs and custom colors may alsobe available.

Upgrades for many models may include:• deluxe programmable digital display

controllers; • locking casters: packaged set of four to

add mobility to most desks;• USB outlet for easy peripheral access.

In addition, this book also includes manyoptional accessories such as: articulatingmonitor supports, keyboard supports,CPU holders, a complete line of ergonomicseating, laptop accessories and carts,presentation carts, and other useful itemsfor today’s technology driven workplace.

Page 4: Fusion Catalog

3

FUSION (Blending Body, Work & Motion)

What can we build for you?

Call us or send us a sketch of your proposed workstation or work environment and we will work withyou to provide you with a superior, effective, andcustomized solution.

Customization considerations include:• Standard 2-stage electric lift system.• Extended height 3-stage electric lift system.• Standard 2-stage crank lift system.• Custom size work surfaces.• Custom work surface colors and textures.

10 TIPS FOR AN ERGONOMIC WORKSTATION:1. Place the monitor directly in front of and centered about the user.

2. Place the monitor at a distance of more than 16" from the user with the viewing

angle between 0 to negative 18 degrees.

3. Keep CPU within arm’s reach but off of the work surface.

4. Place work surface at a height that allows legs to fit comfortably underneath with

feet flat on the floor. Use a footrest if needed.

5. Keyboard should be located at a height that allows the worker to key with the

upper arms hanging relaxed from the shoulders.

6. Keyboard should have a slight negative tilt.

7. Elbows should be roughly at right angles to allow the wrists to be fairly straight.

8. Place the pointing device (mouse) at the same height as the keyboard and as close

to the keyboard as possible.

9. Always maintain contact with backrest of chair to minimize back discomfort.

10. Take 20-second to 2-minute rest breaks between regularly scheduled breaks.

12

3

4

5

6

78

9

10

Making your ergonomic workstation work for You

Increase productivity, reduce fatigue, and enhanceergonomic safety in every office and workstation.

Work SurfacesTable tops can be ordered in various standard sizes. Special laminatesor sizes can be quoted separately. Set-up charges may apply. Pleasecontact us for a quote. (Standard color options are on page 19.)

Custom ColorCustom colors are available with with a special quote for 10 or lesstables of the same color. Special charges may be waived for orders of11+ tables in the same color. Lead Time is a minimum of 8 weeks. Anadditional upcharge may apply for special finishes.

Electric Lift ControllersEvery Electric Lift Table comes with a Programmable Controller.An upgrade Deluxe Programmable controller is also available.The standard Programmable Controller allows three pre-set heightsto be set into the memory of the switch. The Deluxe ProgrammableController allows three different users to pre-set three differentheights per user. This can be especially useful when one user wantsone height for sitting, one height for standing, and one height formatching another work surface.

ADAThe Americans with Disabilities Act requires wheelchair accessibletables with work surfaces to have approximately 26"- 42" heightclearance and 30" width clearance.

Monitor ArmsAll adjustable tables can accept the monitor arms shown in thiscatalog, as well as many from other suppliers. Grommet-mountmonitor arms require a 21⁄2" round hole. Clamp-mount monitor armsclamp from the back side of the table. Independent adjustment ofthe monitor is a critical ergonomic factor (pages 24-27).

Keyboard SupportsMost adjustable work tables can accept a keyboard support system.It may not be necessary to order a keyboard support on a work tablethat includes a Divided Surface Lift (page 29).

Glides & CastersAll feet come with threaded leveling glides for easy on-siteadjustment. In addtion, a set of four (4) locking casters are availablefor most work tables (page 29).

Warranty & CancellationThe Limited Lifetime Warranty for the ergonomic furniture means thatyour system is covered against defects in materials and workmanship.If a problem occurs with your system as a result of normal use, pleasecontact us immediately. This warranty is limited to providing areplacement system or a refund for replaced product or otherreasonable remedy at the discretion of the manufacturer. If an orderis canceled once received, cancellation fees may apply.

Custom Desks:from your sketch,through our engineering, to your office, get exactlywhat you need to meetyour specific requirements.

Page 5: Fusion Catalog

4

FUSION Desks (contour front)

Contour FrontElectric lift, height-adjustable desk.The contour front is designed to keep allof the desk surface within easy reach fromany position. This desk is usually placedagainst a flat wall.

*(84" and 96" desks have a60" wide DSL surface.)

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

Divided Surface Lift (DSL) Undivided Surfacecat.# Length x Depth

ZLCD-E 60"- 96"* x 36"(lengths in 12" increments)

cat.# Length x Depth

ZLCU-E 60"- 96" x 36"(lengths in 12" increments)

Page 6: Fusion Catalog

5

FUSION Desks (straight front)

Straight FrontElectric lift, height-adjustable desk.The straight front is designed to resemblea standard desk and is usually placedagainst a flat wall.

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

Divided Surface Lift (DSL) Undivided Surface

*(84" and 96" desks have a72" wide DSL surface.)

cat.# Length x Depth

ZLSD-E 48"- 96"* x 30"(lengths in 12" increments)

cat.# Length x Depth

ZLSU-E 48"- 96" x 30"-36"(in 12" increments)

Page 7: Fusion Catalog

6

FUSION Desks (multi-system)

Multi-SystemElectric lift, height-adjustable desk.The multi-system is designed to supporttwo-to-three separate viewing or computersystems. This desk is usually placedagainst a flat wall.

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

Multi-Systemcat.# Length x Depth

ZLMS-E 60"- 96" x 36"(lengths in 12" increments)

Page 8: Fusion Catalog

cat.# Left & Right Wings are Equal

ZWCF-E 60" x 60" or 72" x 72"(DSL is 60" wide)

7

FUSION Desks (wedge contour)

Wedge ContourElectric lift, height-adjustable desk.The wedge and wave are designed foreasy access to the entire desk surface.These desks can be placed in a corneror against a flat wall.

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

cat.# Length x Depth

ZWWV-E7736 77" x 36"

Wedge Contour Wave Contour

Page 9: Fusion Catalog

8

FUSION Desks (corner view)

Corner ViewElectric lift, height-adjustable desk.The corner view is designed to keep allof the desk surface within easy reachfrom any position. This desk is usuallyplaced in a corner.

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

cat.# Left Wing x Right Wing

ZCVD-E 60"- 96" x 60"- 96" (30" wing depth)

(wing lengths in 12" increments)

cat.# Left Wing x Right Wing

ZCVU-E 60"- 96" x 60"- 96" (30" wing depth)

(wing lengths in 12" increments)

Undivided SurfaceDivided Surface Lift (DSL)

Page 10: Fusion Catalog

9

FUSION Desks (multi-purpose extension)

Multi-Purpose ExtensionElectric lift, height-adjustable desk.The multi-purpose extension is designed to support one-to-two separate viewing orcomputer systems. This desk can be placedin a corner or against a flat wall.

ELECTRIC BASE:• Includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

cat.# Desk Length x Left Extension

ZMPE-EL 60"- 96"(30"deep) x 48"- 72"(24"wide)(lengths in 12" increments)

cat.# Desk Length x Right Extension

ZMPE-ER 60"- 96"(30"deep) x 48"- 72"(24"wide)(lengths in 12" increments)

Left Extension Right Extension

Page 11: Fusion Catalog

10

FUSION Desks (double drives)

ELECTRIC BASES:• Each surface includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs per surface.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• The front and rear surfaces each have their own motorized lift

mechanisms and controllers for independent height adjustment.• Two laminated solid surfaces with high endurance PVC edging.• Top is supported by heavy duty frame that offers generous leg room.• Custom sizes available; please call for quote.• Color choices are on page 19.

Contour Front Doublecat.# Length x Depth

ZDCF-E7236 72" x 36"

Straight Front Double

Double DrivesElectric lift, dual-height-adjustable desks.The double drives are designed with two desk surfaces, each having its own independent electric lift mechanisms for perfect adjustment and efficiency.

cat.# Length x Depth

ZDSF-E 48"- 96" x 30"(lengths in 12" increments)

Page 12: Fusion Catalog

11

FUSION Desks (double drives)

ELECTRIC BASES:• Each surface includes 3-position programmable controller.• 27" adjustment range: 24.5"- 51.5" (at 1.7"/sec).• Load capacity: 300 lbs per surface.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• The front and rear surfaces each have their own motorized lift

mechanisms and controllers for independent height adjustment.• Two laminated solid surfaces with high endurance PVC edging.• Top is supported by heavy duty frame that offers generous leg room.• Custom sizes available; please call for quote.• Color choices are on page 19.

Left Extension Right Extension Multi-System Double

Double DrivesElectric lift, dual-height-adjustable desks.The double drives are designed with two desk surfaces, each having its own independent electric lift mechanisms for perfect adjustment and efficiency.

cat.# Length x Depth

ZDMS-E 60"- 96" x 36"(lengths in 12" increments)

cat.# Desk Length x Left Extension

ZDME-EL 60"- 96"(30"deep) x 48"- 72"(24"wide)(lengths in 12" increments)

cat.# Desk Length x Right Extension

ZDME-ER 60"- 96"(30"deep) x 48"- 72"(24"wide)(lengths in 12" increments)

Page 13: Fusion Catalog

12

Legacy Series Desks (contour front)

Equipment is shown for illustration and is not included.

desk only(monitor supportnot included)

(Monitor support from page 25contours to the front edge of the desk.)

Divided Surface Lift

36"

72"141⁄2"

12"

36"

60"141⁄2"

12"

Undivided Surface

36"

72"

271⁄2"

36"

60"

271⁄2"

Contour FrontElectric lift, height-adjustable desk.The contour front is designed to keep all ofthe desk surface within easy reach from anyposition. This desk is usually placed againsta flat wall.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• All dimensions are reduced by 1" on three sides for safety clearance.• Models with the Divided Surface Lift (DSL) have 12" adjustment range:

51⁄2" above and 61⁄2" below the work surface with +/-15º tilt.• Custom sizes available; please call for quote.

ELECTRIC BASE:• Includes Programmable Controller!• 16" adjustment range: 27"- 43".• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty. [Color choices are on page 19.]

cat.# Length x Depth

ZKTS-3660 60" x 36"ZKTS-3672 72" x 36"

cat.# Length x Depth

ZKTU-3660 60" x 36"ZKTU-3672 72" x 36"

Page 14: Fusion Catalog

13

Legacy Series Desks (straight front)

Equipment is shown for illustration and is not included.

desk only(monitor support

not included)

Undivided Surface

depth

l1

Divided Surface Lift

depth

l1

17"

12"

Straight FrontElectric lift, height-adjustable desk.The straight front is designed to resemblea standard desk and is usually placedagainst a flat wall.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• All dimensions are reduced by 1" on three sides for safety clearance.• Models with the Divided Surface Lift (DSL) have 12" adjustment range:

51⁄2" above and 61⁄2" below the work surface with +/-15º tilt.• Custom sizes available; please call for quote.

ELECTRIC BASE:• Includes Programmable Controller!• 16" adjustment range: 27"- 43".• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty. [Color choices are on page 19.]

*(72" desks have a 60" wide DSL surface.)

cat.# Length x Depth

ZKTA 36"- 72"* x 30"(lengths in 12" increments)

cat.# Length x Depth

ZKTC 36"- 72" x 24"- 30"(lengths in 12" increments)

Page 15: Fusion Catalog

14

Legacy Series Desks (corner view)

Equipment is shown for illustration and is not included.

desk only(monitor supportsnot included)

Undivided Surface

Divided Surface Lift

cat.# Length(l1) x Length(l2) x Depth

ZKEC-4872R (Right Ext) 48" x 72" x 30"ZKEC-7248L (Left Ext) 72" x 48" x 30"ZKEC-6072R (Right Ext) 60" x 72" x 30"ZKEC-7260L (Left Ext) 72" x 60" x 30"ZKRC-6060 (equal sides) 60" x 60" x 30"ZKRC-7272 (equal sides) 72" x 72" x 30"

cat.# Length(l1) x Length(l2) x Depth

ZKEA-4872R (Right Ext) 48" x 72" x 30"ZKEA-7248L (Left Ext) 72" x 48" x 30"ZKEA-6072R (Right Ext) 60" x 72" x 30"ZKEA-7260L (Left Ext) 72" x 60" x 30"ZKRA-6060 (equal sides) 60" x 60" x 30"ZKRA-7272 (equal sides) 72" x 72" x 30"

l2

l1

depth

l2

l1

depth

right extension left extension equal sides

Corner ViewElectric lift, height-adjustable desk.The corner view is designed to keep allof the desk surface within easy reachfrom any position. This desk is usuallyplaced in a corner.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• All dimensions are reduced by 1" on three sides for safety clearance.• Models with the Divided Surface Lift (DSL) have 12" adjustment range:

51⁄2" above and 61⁄2" below the work surface with +/-15º tilt.• Custom sizes available; please call for quote.

ELECTRIC BASE:• Includes Programmable Controller!• 16" adjustment range: 27"- 43".• Load capacity: 300 lbs.• Requires less than 3amps of power.• Locking casters available.• Limited Lifetime Warranty. [Color choices are on page 19.]

Page 16: Fusion Catalog

15

Legacy Series Desks (bundles)

Equipment is shown for illustration and is not included.

Techno-Aide presents our Most Popular Legacy Desks withtheir Most Popular Accessories!

30"

72"17"

12"

Cat.# ZKTA-BB72 72” Rectangular KitKit includes:• 72” x 30” height adjustable rectangular desk.• 2+1 fully articulating three-monitor support system.• Superior TrophyTM ergonomic chair.• Programmable electric lift system.• Articulating divided surface for keyboard.• Cable management/modesty panel.• Mobile CPU holder.

60"

60"

30"

Cat.# ZKRA-BA60 60” Corner KitKit includes:• 60” x 60” height adjustable corner desk.• 2+1 fully articulating three-monitor support system.• Premium ChampionTM ergonomic chair.• Programmable electric lift system.• Articulating divided surface for keyboard.• Cable management/modesty panel.• Mobile CPU holder.

36"

60"141⁄2"

12"

Cat.# ZKCS-BC60 60” Contour Front KitKit includes:• 60” x 36” height adjustable contour front desk.• Panoramic adjustable three-monitor support.• Premium ChampionTM ergonomic chair.• Programmable electric lift system.• Articulating divided surface for keyboard.• Cable management/modesty panel.• Mobile CPU holder.

Allow Techno-Aide to design comfort into yourimage management needs. View images in anyconfiguration and at any angle. Let our years ofexperience in the imaging field carry you into theDigital Age in comfort. This relaxed environmentwill allow you to provide the ultimate in careto your patients. Please see accompanying pagesfor component details.

Legacy Bundles

Bundled for

One Low Price!

Save 10%!

Page 17: Fusion Catalog

16

FUSION Desks (manual crank lift)

Manual Crank LiftManual crank lift, height-adjustable desks.The manually adjustable lifts are designed aseconomical alternatives to the electric lifts and can be used where power supply is limited.

MANUAL CRANK BASE:• EZ-Crank mechanism fluidly raises and lowers desk.• 28" adjustment range: 241⁄4"- 521⁄4".• Load capacity: 300 lbs.• Requires no power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

Contour Front Deskw/ Divided Surface

Contour Front Deskw/ Solid Surface

Multi-System Deskw/ Solid Surface

cat.# Length x Depth

ZLMS-C 60"- 84" x 36"(lengths in 12" increments)

cat.# Length x Depth

ZLCU-C 60"- 84" x 36"(lengths in 12" increments)

cat.# Length x Depth

ZLCD-C 60"- 84" x 36"(lengths in 12" increments)

Page 18: Fusion Catalog

17

FUSION Desks (manual crank lift)

MANUAL CRANK BASE:• EZ-Crank mechanism fluidly raises and lowers desk.• 28" adjustment range: 241⁄4"- 521⁄4".• Load capacity: 300 lbs.• Requires no power.• Locking casters available.• Limited Lifetime Warranty.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Top is supported by a heavy duty frame that offers generous leg room.• Models with the Divided Surface Lift (DSL) have 113⁄4" adjustment

range: 6" above and 53⁄4" below the work surface with +9/-15º tilt.• Custom sizes available; please call for quote.• Color choices are on page 19.

cat.# Length x Depth

ZWWV-C7736 77" x 36"

Straight Front Deskw/ Solid Surface

Straight Front Deskw/ Divided Surface

Wave Contour Deskw/ Solid Surface

Manual Crank LiftManual crank lift, height-adjustable desks.The manually adjustable lifts are designed aseconomical alternatives to the electric lifts and can be used where power supply is limited.

cat.# Length x Depth

ZLSD-C 48"- 84" x 30"(lengths in 12" increments)

cat.# Length x Depth

ZLSU-C 48"- 84" x 30"- 36"(lengths in 12" increments)

Page 19: Fusion Catalog

18

FUSION Desks (pedestal workstations)

Pedestal WorkstationsSingle column, height-adjustable workstations.The pedestal workstations are designed to fit wherefull sized desks cannot or in high foot-traffic areas.

ELECTRIC or MANUAL-SPRING BASE:• Electric lift includes a basic 2-button controller.• Manual lift adjusts height with a convenient lever.• 19" adjustment range: 26"- 45".• Load capacity, electric lift: 150 lbs.• Load capacity, manual spring lift: 30 lbs.• Locking casters available.

WORK SURFACE:• Laminated solid surface with high endurance PVC edging.• Standard models include: rectangle, 90º corner, 120º corner.• All dimensions are reduced by 1" on three sides for safety clearance.• Custom sizes available; please call for quote.• Limited Lifetime Warranty.• Color choices are on page 19.

cat.# Length x Depth

ZPSH-E4224 42" x 24"ZPSH-E4824 48" x 24"

cat.# Length x Depth

ZPSH-S4224 42" x 24"ZPSH-S4824 48" x 24"

cat.# Length x Depth

ZPCV-S41090 41" x 24"ZPCV-S47090 47" x 24"

cat.# Length x Depth

ZPCV-E41090 41" x 24"ZPCV-E47090 47" x 24"

cat.# Length x Depth

ZPCV-S36120 36" x 24"ZPCV-S42120 42" x 24"

cat.# Length x Depth

ZPCV-E36120 36" x 24"ZPCV-E42120 42" x 24"

Rectangular Pedestal

90º Corner Pedestal

120º Corner Pedestal

Electric Lift

Spring Lift

Electric Lift

Spring Lift

Electric Lift

Spring Lift

Page 20: Fusion Catalog

19

FUSION Desks (color options)

FUSIOn

height-adjustable desk color options

Default Colors:• Desktop: black• Frame: black• Edging: black

Custom colorsare available!

FrameSupport

Color

DesktopSurface

Laminate

black

black

black gray mist maple wild cherry mahogany

graphite twilight desert canyon cavern

carbon nickel silicon tungsten rare earth

DesktopEdgeBand

aluminum

gray beige

Default Colors:• Desktop: black• Frame: black• Edging: black

DesktopEdgeBand

FrameSupport

Color

DesktopSurface

Laminate

black

black graphite mouse folkstone Mahogany

black

Legacyheight-adjustable desk color options

Page 21: Fusion Catalog

Cat.# ZEMS-SF23$495.00

Triple capacityof ZEMS-SF21shown above.

Triple Monitor Extension Arm

20

Desktop Monitor Supports (extension)

Equipment is shown for illustration and is not included.

Cat.# ZEMS-SF21$295.00

• Double-joint extension arm.• 5"-24" extension range.• 17" height range.• Monitor weight capacity:

171⁄2-lb. max.• Pivot/tilt/rotate monitor.• Clamp mount.

Cat.# ZEMS-SF22$395.00

Double capacityof ZEMS-SF21shown tothe left.

Single Monitor Extension Arm Dual Monitor Extension Arm

Cat.# ZEMS-MF26$970.00

six times capacityof ZEMS-SF21shown above.

Cat.# ZEMS-MF24$800.00

Four times capacityof ZEMS-SA21shown above.

Six Monitor Extension Arm

Quad Monitor Extension Arm

Cat.# ZEMS-AAMS$95.00

• Allows a monitor to beadjusted 5" above to5" below the mount.

• Attached to standardmonitor VESA bracket.

Add-On Vertical Slide Adjuster

Cat.# ZEMS-MC21$480.00

• Double-joint extension arm.• 5"-24" extension range.• 17" height range.• Monitor weight capacity:

171⁄2-lb. max.• Pivot/tilt/rotate monitor.• Includes gel palm rest.• Clamp mount.

Single Monitor/Keyboard Combo

Cat.# ZEMS-MC22$720.00

• Similar to the ZEMS-MC21Single Monitor Comboshown to the left, but accommodatestwo monitors.

Dual Monitor/Keyboard Combo

Page 22: Fusion Catalog

Cat.# ZEMS-SV21$280.00

• Articulating gas springdirectional adjustment.

• 21" extension range.• 13" height range.• Monitor weight range:

61⁄2-lb. min./171⁄2-lb. max.• Pivot/tilt/rotate monitor.• Clamp mount.

Economy Articulating Arm

21

Desktop Monitor Supports (articulating)

Equipment is shown for illustration and is not included.

Cat.# ZEMS-SA21$350.00

• Articulating gas springdirectional adjustment.

• 24" extension range.• 13" height range.• Monitor weight range:

7-lb. min./20-lb. max.• Pivot/tilt/rotate monitor.• Clamp mount.

Cat.# ZEMS-SA22$520.00

Double capacityof ZEMS-SA21shown tothe left.

Single Monitor Articulating Arm Dual Monitor Articulating Arm

Cat.# ZEMS-HDA2$525.00

• Similar in style to theZEMS-HDA1 to the left.

• Supports two monitorson a single gas springarticulating arm.

• Total COMBINEDWeight capacityis 33-lbs.

Heavy-Duty Articulating Arm Dual Heavy-Duty Articulating Arm

Cat.# ZELA-VALS$95.00

• Converts any monitormount to a laptop holder.

• Fits laptops witha diagonal measurementfrom 12" to 151⁄2".

• Adjustable brackets holdlaptop firmly in place.

• Universal laptop clamps.

Laptop Conversion Tray

Cat.# ZELA-SALH$440.00

• Articulating gas springdirectional adjustment.

• 24" extension range.• 13" height range.• Laptop weight range:

6-lb. min./18-lb. max.• Pivot/tilt/rotate bracket.• Clamp mount.

Laptop Articulating Arm

Cat.# ZELA-VLMC$630.00

• Similar to the ZELA-SALHLaptop Arm shown to theleft, but includes brackets to mount both a laptop and a monitor on independent arms at the same time.

Cat.# ZEMS-HDA1$475.00

• Articulating gas springdirectional adjustment.

• 4"-24" extension range.• Monitor weight range:

171⁄2-lb. min./33-lb. max.• Pivot/tilt/ rotate monitor.• Clamp mount.

Laptop/Monitor Combo Arm

Page 23: Fusion Catalog

22

Desktop Monitor Supports

Equipment is shown for illustration and is not included.

• Automatically change the height of your monitor array with the push of a button.• Electric-lift column mounts directly into desktop for maximum stability.• Controller mounts on the front edge of the desk, conveniently at your fingertips.• Each monitor can be uniquely positioned on its own extendable arm.• Includes standard 75mm and 100mm VESA brackets for any monitor.

fusioNvue

Cat.# ZLMS-FV2 (2-monitor set-up)Cat.# ZLMS-FV3 (3-monitor set-up)Cat.# ZLMS-FV4 (4-monitor set-up)

Move your monitors

without moving

your desk!

Monitor MountCat.# ZLMS-OCMB $340.00 (black)Cat.# ZLMS-OCMS $340.00 (silver)

Laptop MountCat.# ZLLS-OCLB $585.00 (black)Cat.# ZLLS-OCLS $585.00 (silver)

Desktop/Cart SupportsCrank Height Adjustable

• Monitor post attaches to deskwith clamp or direct mount.

• Height adjusts with a screwcrank so that stability ismaintained and height drift is eliminated.

• Includes standard VESAmount.

Double BankFilm Activated SwitchCat.# VVD-21 $725.00

With Manual SwitchCat.# VVD-20 $675.00

35"w x 19⁄16"d x 201⁄4"hShips @ 16 lbs.

Single BankFilm Activated SwitchCat.# VVS-11 $395.00

Manual SwitchCat.# VVS-10 $365.00

21"w x 19⁄16"d x 201⁄4"hShips @ 10 lbs.

• Ultra-Slim design (only 19⁄16" thick!) is clean and high-tech. • Over 90% light uniformity from edge to edge.

• Upper and Lower Film Grips. • Extra LONG LAMP LIFE at 50,000 hours!

• 6 foot power cord and UL listed. • Average light intensity is 5000 nits.

View film right next todigital images because

these illuminators mount directly to anymonitor mount with

standard VESA brackets.

Attention Radiology!Techno•Vision Illuminators offer the perfect fusion of low-tech and high-tech viewing!

These are flatfilm viewers,

not flat screenmonitors.

fusioNvue

Electric height-adjustable monitor support

Page 24: Fusion Catalog

23

Wall Monitor Supports

Cat.# ZLMS-FPCM36 (36" pole) $1549.00Cat.# ZLMS-FPCM48 (48" pole) $1599.00Cat.# ZLMS-FPCM60 (60" pole) $1649.00Cat.# ZLMS-FPCM72 (72" pole) $1699.00

Universal bracket offers perfectly geared proportion control for any large flat screen hole configuraton.

Equipment is shown for illustration and is not included.

Wall Mount Monitor SupportCat.# ZEMS-WA21$350.00

• Articulating gas springdirectional adjustment.

• 24" extension range.• 13" height range.• Monitor weight range:

7-lb. min./20-lb. max.• Pivot/tilt/rotate monitor.• Wall mount.

Wall Mount Laptop HolderCat.# ZELA-WALT$550.00

• 24" vertical wall track.• Unique shuttle provides 71⁄2" of

easy-touch arm height adjustment.• Fits laptops with a diagonal

measurement from 12"-151⁄2".• 3-piece extension arm.• Adjustable brackets hold

laptop firmly in place.• Universal laptop clamps.

Retractable LCDMonitor MountCat.# ZEMS-WAXR $450.00

• Supports 37" to 46" screens.• Retracts to 8.7" and extends to 21.5".• Swings 160° left or right.• Screen pivots +/-15°.• Bracket adjustment width: 4" to 31.5".• Overall size: 33.8"w x 20.3"h.• Weight capacity: 110 lbs.• Includes screen-to-mount safety latch.

Non-RetractableLCD MountCat.# ZEMS-WFXP $240.00

• Supports 37" to 65" screens.• Screen pivots +/-15°.• Bracket adjustment width: 4" to 31.5".• Overall size: 33.8"w x 19.7"h x 4"d.• Weight capacity: 176 lbs.• Includes screen-to-mount safety latch.

Flat Panel Ceiling Mount

• Unique universal bracket allows display to be tilted and rotated,then locked into position.

• Display can be mounted landscape or portrait (360º rotation).• Ceiling Mount bracket holds 42" to 61" diagonal displays.• Available in four pole lengths for various height ceilings.• Weight capacity is 170 lbs.

Page 25: Fusion Catalog

24

Wall Workstations (extension)

Dual ViewExtension ArmWall Mount

Cat.# ZEVW-ES22$850.00

Dual ViewExtension ArmWall Mountw/ CPU

Cat.# ZEVW-ET32$1120.00

Single ViewExtension ArmWall Mount

Cat.# ZEVW-ES21$700.00

Single ViewExtension ArmWall Mountw/ CPU

Cat.# ZEVW-ET31$960.00

Equipment is shown for illustration and is not included.

Standard Wall MountCat.# ZKVW-WAL $800.00

• All components can be easilyrelocated along the verticalsupport post.

• Wall Mount System includes:1-511⁄2" aluminum wall

mount post1-extension arm monitor

support1-keyboard w/ mousepad1-utility shelf1-CPU Holder

(“Standard” components are not compatible with any other series.)

Add-On Monitor ArmCat.# ZKVW-MA-811 $150.00

• Second extension arm can beadded to unit so that twomonitors can be mounted atthe same time (not shown).

Extension Monitor Arms• Double-jointed horizontal movement• Track-slide height adjustment

• Components can be easily relocated along support post.• Includes: 1-311⁄2" wall mount vertical track

1-extension arm keyboard tray1-75mm/100mm VESA swivel mount

• Models with CPU Holder include an additional 311⁄2" track (for 63" total) and CPU holder.

Page 26: Fusion Catalog

25

Wall Workstations (articulating)

Dual ViewArticulating ArmWall Mount

Cat.# ZEVW-AS22$990.00

Dual ViewArticulating ArmWall Mountw/ CPU

Cat.# ZEVW-AT32$1290.00

Single ViewArticulating ArmWall Mount

Cat.# ZEVW-AS21$880.00

Single ViewArticulating ArmWall Mountw/ CPU

Cat.# ZEVW-AT31$1140.00

Equipment is shown for illustration and is not included.

Flip-Up Wall MountCat.# ZEVW-SS21 $490.00

• All components can be easily relocatedalong the vertical support post.

• Wall Mount System includes:1-31.5" wall mount vertical track1-FLIP-UP Keyboard tray1-75mm/100mm VESA swivel mountAll components slide independently

Flip-Up Wall Mount w/CPUCat.# ZEVW-TS31 $830.00

• Same as above, but includes additional 31.5" track (for 63" total) and CPU holder.

Keyboard tray folds upand out of the way!

Articulating Monitor Arms• Omni-directional movement• Dynamic height adjustment

• Components can be easily relocated along support post.• Includes: 1-311⁄2" wall mount vertical track

1-extension arm keyboard tray1-75mm/100mm VESA swivel mount

• Models with CPU Holder include an additional 311⁄2" track (for 63" total) and CPU holder.

Page 27: Fusion Catalog

26

Mobile Workstations (standard format)

Equipment is shown for illustration and is not included.

Standard Mobile PostCat.# ZKVW-MOB $1050.00

• All components can be easilyrelocated along the verticalsupport post.

• Mobile Post System includes:1-611⁄2" post with mobile base5-casters (3 locking)1-cable management channel1-swivel monitor support1-keyboard w/ mousepad1-CPU holder1-utility shelf1-printer shelf

(Components not compatible with any other series.)

(Computer equipment not included)

Mobile WorkstationCat.# ZEMW-M500$990.00

• Self-contained cart fordesktop PC or laptop.

• Platform height adjustment:28" to 41".

• Includes CPU holder andfixed height monitor mount.

• Five-star base with twolocking casters.

• Detachable palm rest.• Weight capacity: 20 lbs.

Mobile WorkstationCat.# ZEMW-M750$1295.00

• Same as the ZEMW-500,but also includes:

• Slide-out keyboard tray.• Printer/utility shelf.

Page 28: Fusion Catalog

27

Mobile Workstations (large format)

Mobile Max WorkstationThe Mobile Max Workstation is designed with an extra wide base (48" x 28")to provide stability for supporting large format monitors (32" to 61") andmultiple standard monitors (1 to 3) on a mobile platform.

Additional Monitor Supports in

75mm/100mm VESA standard(base unit with post ordered separately)

cat.# mounts arm type

ZBMM-MS1P 1 pivotZBMM-MS1S 1 swing armZBMM-MS1X 1 extension armZBMM-MS2B 2 31" beamZBMM-MS3B 3 42" beam

Accessoriescat.# description

ZBMM-AGKT keyboard shelfZBMM-AGUS utility shelfZBMM-AMCH CPU holderZBMM-AGCB cable bin

Cat.# ZBMM-72SM$1869.00(200x200 & 200x100 VESA mount for 32" to 46" monitors)

Select one of two base units:

Cat.# ZBMM-72XL $2869.00(large format universal VESAmount for 42" to 61" monitors)

All Mobile Max base units include:1-72" post rail1-48" x 28" extra wide mobile base4-locking casters1-push handle1-large format monitor support

(monitor not included)

(Components not compatible with any other series.)

(Computer equipment not included)

Mini-MaxCat.# ZEMS-LGTV $990.00

• Supports 32" to 52" LCD screens.• Mount LCD at various heights from 47.2" to 63".• Bracket adjustment width: 4" to 23.6".• Overall size: 32.3"w x 65"h x 24.4"d.• Peripheral shelf size: 21.7"w x 13.8"d.• Accommodates different LCD mounting patterns.• Enclosed cable management.• Four heavy duty casters (two locking).• Weight capacity: 110 lbs.(No other accessories are available for this unit.)

Includes“large format”monitor mount(monitor not

included)

48" x 28" extra wide baseoffers superior stability!

Equipment is shown for illustration and is not included.

Page 29: Fusion Catalog

28

FUSION Accessories (CPU/keyboard)

Equipment is shown for illustration and is not included.

UniversalCPU Holder

(CPUs not included)

Universal CPU HolderCat.# ZEDA-CPUU $165.00

• Stores CPU underneath work surface.• Features easy-access slide and swivel action.• Adjustable width: 21⁄2" to 81⁄4".• Adjustable height: 13" to 21".• 100 lb weight capacity.

Mobile CPU CaddyCat.# ZEDA-CPUC $89.00

• Stores CPU above the floor for easy access.• Fits any CPU within a 31⁄2"-83⁄4" width.

Clamp CPU HolderCat.# ZKUH-CL $150.00 (standard non-locking)Cat.# ZKUH-LK $160.00 (with security lock)

• Save valuable workspace and protect CPU.• Fits CPU: 15"-23"h x 43⁄4"-81⁄2"w x any depth.• 18" track and 360º swivel for easy access.• Securely clamps CPU into position.• 75 lb weight capacity.

Clamp CPU HolderNon-Locking

Clamp CPU Holderwith Security Lock

CPUCaddy

Lift and Lock Keyboard Support• Lift and Lock height adjustment.• 7" height adjustment on 21" track:

21⁄2" above and 41⁄2" below the surface.• 15º +/- tilt and 360-degree swivel.• Mouse surface can be mounted

on either side.• Integrated gel palm rest.

Extended Reach Keyboard Support• Lift and Lock height adjustment.• 16" height adjustment on 243⁄4" track:

8" above and 8" below the surface.• 15º +/- tilt and 360-degree swivel.• Mouse surface can be mounted

on either side.• Integrated gel palm rest.

Value Engineered Keyboard Support• Spring assisted height adjustment.• 61⁄4" height adjustment on 17" track:

11⁄4" above and 5" below the surface.• 15º +/- tilt and 360-degree swivel.• 25"wide platform accommodates keyboard

and mouse. • Integrated gel palm rest.

Cat.# ZEKS-KS07$295.00

Cat.# ZEKS-KE06$220.00

Cat.# ZEKS-KX16$350.00

Keyboard Supports arenot necessary on deskswith the DSL.

Page 30: Fusion Catalog

29

FUSION Accessories (cable/power)

Equipment is shown for illustration and is not included.

Surge Protection Power Cablewith Cord WinderCat.# ZACM-CW $95.00

• Seven (7) outlets in one convenient power strip.• Surge protected and UL/CSA approved.• Winder keeps excess cable up and safely out of the way.• 25-foot power cord provide access to almost any location.

Surge Protection Power Cablewith Mounting BracketCat.# ZACM-CB $89.00

• Seven (7) outlets in one convenient power strip.• Surge protected and UL/CSA approved.• Bracket lets you mount the strip almost anywhere.• 25-foot power cord provide access to almost any location.

Cable Pouch• Serves as both a cable management

pouch and a modesty panel.• Fabric bag holds shape with metal rod

inserts.• Solid fabric provides modesty panel.• Mounts easily under any work surface

with screws.• 10" high x length of choice.

(24" version) Cat.# ZACM-P24 $110.00(36" version) Cat.# ZACM-P36 $130.00(60" version) Cat.# ZACM-P60 $150.00

Cable TowerCable Clip

Cable Management Systems

Cat.# ZACM-SS $99.00• Conveniently intertwine cables

into the spine for easy, neatcontainment.

• Weighted base prevents shifting.• Easy to install or move.

Cat.# ZACM-SC $12.50• Holds multiple cables out of the way.• Cables can be placed between clips or

inside clips for a more secure hold.• Easily installs to the underside of desk.

Underside Top Side

The Amazing Power GrommetCat.# ZACM-PG $99.00

• Amazing multi-device connectivity station.• Wiring and components are UL Listed.• Surge protection at 900 joules with circuit breaker.• Rated for 110-130VAC, 60Hz, 10A, 1250Watts max.• Fits 23⁄8" to 23⁄4" diameter grommet holes.• Grommet hole must already be in the desk!

Topside features:• Lighted on/off switch with

built-in circuit breaker.• (2) 110-130VAC outlets.• (1) USB 2.0 upstream port.• (4) USB 2.0 downstream ports.• (1) RJ45 ethernet jack.• (1) RJ11 telephone jack.

Underside features:• 6-foot grounded power cord.• (1) RJ45 ethernet jack.• (1) RJ11 telephone jack.• (1) USB 2.0 upstream port

(secondary: feeds all topsideUSB ports).

Page 31: Fusion Catalog

30

FUSION Accessories (laptop/personal)

Equipment is shown for illustration and is not included.

CupholderCat.# ZADA-CP $65.00

• Holds cups, mugs, andsquare bottles!

• Desk edge clamp mount.• All-metal construction.

Combo Copy/Telephone SupportCat.# ZADA-CS $125.00

• Desk edge clamp mount.• Gooseneck arm holds tray in any position.• Adjust flat for lightweight phones.• Hook & loop included for securing phone.• Adjust upright for papers.• Lower lip keeps booklets open.

Pencil DrawerCat.# ZADU-PD$39.00

• Four small compartments and one large providespace for most everyday storage needs.

• EZ-Slide ball bearing glides for smooth travel.• All mounting hardware is included.• Surpasses ANSI/BIFMA standards.

Pencil Drawers may not fiton desks with the DSL.

Desktop Laptop HolderCat.# ZELA-DTLH$235.00

• Four use with external keyboardand mouse (not included).

• Includes four (4) USB 2.0 ports onthe back and an AC adapter.

• Quiet fan keeps laptop cool.• Adjustable to four height positions.• 360º swivel.• Windows and Mac compatible.

Laptop LockerCat.# ZELA-LPLD$117.00

• Theft deterrent locking drawer.• Soft foam on the front of the

drawer provides wrist support.• Cord management slots in the back.• Vented for laptop cooling.• 16" ball bearing slides.• 16"w x 16"d x 2"h.• Supports up to 11 lbs.

Laptop Locker should not bemounted on desks with the DSL.

Page 32: Fusion Catalog

31

FUSION Accessories (rests/drawers)

“Legacy” Locking Casters(For LEGACY LIFT ONLY)Cat.# ZAC3-KE $110.00 (incl. 4 casters)

• Set of four 3" locking casters.• Changes Legacy Series Desks into

mobile platforms.• Easy installation; can be retrofitted.

FUSIOn Locking Casters(For ELECTRIC LIFT ONLY)Cat.# ZAC2-SE $42.00 (incl. 4 casters)

• Set of four 2" locking casters.• Changes FUSION Electric Lift Desks

into mobile platforms.• Easy installation; can be retrofitted.

FUSIOn Locking Casters (For MANUAL LIFT ONLY)Cat.# ZAC3-SM $115.00 (incl. 4 casters)

• Set of four 3" locking casters.• Changes FUSION Manual Lift Desks

into mobile platforms.• Easy installation; can be retrofitted.

• Can be used with desks or as stand-alone units.• Features easy-access glides on all drawers.• Casters are included to convert to mobile base.• Steel construction meets ANSI-BIFMA standards.• Durable black umber powder coat finish.• Size: 151⁄4"w x 217⁄8"d x (see photos for height).

Filing Drawer Pedestals

213⁄8" height fits underheight adjustable desks.

271⁄8" height fits besideheight adjustable desks.

Foot Reliever FootrestCat.# ZAFR-BA $65.00

• Roller balls bring relief to sore and tired feet.• Platform is padded for extra comfort.• Active easy-slide angle adjustment.• Gray textured fabric with gray metal frame.

Adjustable FootrestCat.# ZEDA-FR03 $79.00 (platform rests 3" from floor.)Cat.# ZEDA-FR06 $89.00 (platform rests 6" from floor.)

• Ideal for people who cannot rest feet on the floor.• Sliding platform allows ankle flexion and extension.• Durable, polished chrome metal frame.

Cat.# ZADF-30$539.00

two box drawersone file drawer

Cat.# ZADF-BF$495.00one box drawerone file drawer

Page 33: Fusion Catalog

32

FUSION Accessories (desk lamps)

Flexi-LampCat.# ZKDL-FFL$170.00

• 20-watt halogen lamp.• 25" gooseneck arm

conveniently allowslamp to be adjustedinto virtually any position for director ambient light.

• Glass UVB filter enclosure.• 3" x 3" compact shade.• 6" tip resistant base.• 9-foot power cord.

Flying Saucer LampCat.# ZELD-DTFS$117.00

• Efficient 3-watt LED lamp.• 113⁄4" gooseneck arm.• 3300K color temperature.• Small profile.• Lightweight.• 7-foot power cord.

Light WandCat.# ZELD-DTLW$125.00

• 13-watt fluorescent lamp.• 27" long wand illuminates

large areas and documents.• Pivots from vertical to

horizontal.

Hi-Lo LampCat.# ZKDL-FHL$155.00

• Three stage rocker switch(hi/low/off).

• 50-watt halogen lamp.• Unique parabolic shade

with positioning handle.• 22" adjustable steel arm.• Color correct lighting.

Fold-Away LampCat.# ZELD-FLDX$295.00

• Dual arms (13" and 14") on a fully articulating joint.• 360º rotation on the base.• Four energy efficient LEDs.• 6.5-watt LED with 4-step dimming.• 3200-3700K color temperature.• Lightweight aluminum slim design.• 6-foot power cord.

Shines UP or DOWN forAmbient or Direct Light!

Page 34: Fusion Catalog

33

FUSION Accessories (workspace lamps)

Highlighter-LEDaisy-Chain LED Underlight System

• Sleek and stylish undercabinet LED lighting.• Order as stand-alone lights or multi-unit

daisy-chain systems.• High-tech touch sensitive on/off control.• 3500K color temperature.• Light bar rotates 180º.• Handsome brushed silver finish.• 9-foot power cord.• Daisy-chain configurations include the specified

number of lights and 48" jumper cord.• Mounting hardware and cord clips included.

cat.# wattage length price

ZELU-LE24 12.5 23" $220.00ZELU-LE36 17.0 29" $295.00ZELU-LE48 21.5 35" $395.00

cat.# wattage length price

ZELU-FL24 13 22" $120.00ZELU-FL36 24 24" $130.00ZELU-FL48 39 35" $140.00

cat.# units/chain style price

ZELU-D242 2-unit chain LE24 $435.00ZELU-D243 3-unit chain LE24 $620.00ZELU-D244 4-unit chain LE24 $795.00ZELU-D362 2-unit chain LE36 $585.00ZELU-D482 2-unit chain LE48 $750.00

SINGLE UNITS*

DAISY-CHAIN UNITS*

*Single units do not include the jumper cords.To create a daisy chain of multple lights, pleaseorder the daisy chain units that contain all thenecessary parts for multiple light installations.

Touch Sensitive on/off control

Highlighter-FLUnderlight Fluorescent

• Encased fluorescent lamps mountunder the desk surface or shelf for ambient lighting.

• On/off rocker switch.• Electronic ballasts.• Prismatic lens for light distribution.• 6400K color temperature.• Metal housing with black finish.• 9-foot power cord.• Includes additional outlet for

daisy-chain capability.• Mounting hardware and

cord clips included.

Page 35: Fusion Catalog

34

Laptop Solutions

Equipment is shown for illustration and is not included.

Full Support Tilt-Top Laptop CartCat.# ZBLM-150 $340.00

Locking Laptop Charging Stations

10-Bay CartCat.# ZBLC-10$799.00

20-Bay CartCat.# ZBLC-20$1099.00

Tilt-Top Laptop CartCat.# ZBLM-100 $135.00

Height and TiltAdjustments

• Keep your laptop handy wherever you are.• Variable height stand adjusts from 28" to 40".• Black powder coat steel frame.• Includes casters (two locking).• Ships @ 20#.

• Keep 10 or 20 laptops secure and fully charged withtwo models of locking charging stations.

• Locking doors fold back and stay open with magnetsfor easy loading and unloading.

• UL/CSA approved electrical outlet on each shelf.• One main power cord on 10-bay cart; two main

power cords on 20-bay cart (recommended thateach power cord be plugged in to separate circuits).

• Includes 4" heavy duty casters (two locking).• Finished with white laminate panels.• 10-bay ships @ 140# / 20-bay ships @ 232#.

• All in one support for the laptop on the go.• Includes platforms for peripherals and supplies.• Variable height stand adjusts from 27" to 39".• Includes casters (two locking).• Ships @ 34#.

• Tray: 18"w x 14"d.• Tray angle:

45º to -45º.

Page 36: Fusion Catalog

35

Laptop Solutions

Equipment is shown for illustration and is not included.

Laptop Mobile CommandCat.# ZBMW-LMC$795.00

Go-Anywhere Laptop CartCat.# ZBLM-MC$395.00

Laptop Mobile Command PLUSCat.# ZBMW-LCP$860.00

• Mobile locking cabinet for securing laptops and other devices.• 7" locking lid on top.• One 20" x 121⁄2" retractable shelf.• Two 20" x 17" stationary shelves.• Bottom space has std. 19" IT rack brackets

(18.344" centers x 141⁄2" high).• Black laminate cabinet (assembly required).• Includes surge protector.• Overall dimensions: 25" x 25" x 45".• Command ships @ 130#.

Same as Laptop Mobile Command, PLUS:• Variable height equipment tray adjusts

from 34" to 44".• 18" x 18" tray adjusts with gas spring.• Command PLUS ships @ 147#.

Locking LaptopWorkstations!

LAPTOP CART (gas spring height adjustment):• Portable stand with ample room for a keyboard or laptop.• Easily moves where you need to work.• Footring controls a pneumatic gas spring that raises the

top from 20" to 30".• Includes angled laptop shelf and two removable

mousepad/cupholders.• Top is light gray with black vinyl wrist rest.• Frame is black powder coated steel.• Ships UPS/FedEx @ 38#.

Pop-Up Laptop CartCat.# ZBLM-PB(black)$250.00

Cat.# ZBLM-PM(mahogany)$250.00

LAPTOP CART (gas spring height adjustment):• Portable stand with ample room for a keyboard or laptop.• Easily moves where you need to work.• Hand lever controls a pneumatic gas spring that raises the

top from 211⁄4" to 311⁄4".• Top is available in black or mahogany laminate.• 5-star base with easy rolling 2" casters.• Ships UPS/FedEx @ 23#.

Page 37: Fusion Catalog

36

Department Workspaces (podiums)

Equipment is shown for illustration and is not included.

Mobile AV PodiumCat.# ZDWA-GB (gray & black)Cat.# ZDWA-TB (teak & black)$340.00

Optional Locking CabinetCat.# ZDWA-GX (gray)Cat.# ZDWA-TX (teak: shown)$199.00

Adjustable Height AV PodiumCat.# ZDWA-HA$299.00

Fixed Height AV PodiumCat.# ZDWA-FH$279.00

• Versatile and compact AV Podiumin one mobile unit.

• Overall dimensions: 18"w x 30"d x 401⁄4"h.

• 18"w x 14"d laptop shelf is height adjustable from 19" to 391⁄2" to accommodate sitting or standing.

• Power coat steel frame with high pressure laminate shelves.

• Includes 3" casters (two locking).• Ships @ 46#.

• Compact mobile presentation center.• Fix height at 381⁄2" to 441⁄4".• Shelves are 24" x 18" and 24" x 14".• Includes CD rack and CPU rack.• Ships @ 44#.

• Ideal for office or training room.• Variable height from 411⁄2" to 471⁄4".• Laptop shelf can be extend outward.• Bottom shelf is for other peripherals.• Ships @ 34#.

AV PodiumsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Page 38: Fusion Catalog

37

Department Workspaces (presentation)

Equipment is shown for illustration and is not included.

Mobile Presentation CenterCat.# ZDWC-MBP$578.00

• Tilts back and rolls like a dolly for easy storage.• Locking double doors provide equipment security when not in use.• Retractable shelf puts a laptop or keyboard in easy reach.• Middle shelf adjusts to three positions.• Handy bottom drawer provides extra storage.• Overall dimensions: 231⁄2"w x 17"d x 411⁄2"h.• Includes a 20" x 16" flip-up shelf mounted on the side.• Ships @ 102#.

Open Shelf Presentation CenterCat.# ZDWC-CLO$839.00

• Lecturn and projector cabinet in one.• Open shelf design makes locating and arranging materials

quick and easy.• Primarily designed for standing or use with a stool.• Overall dimensions: 30"w x 18"d x 45"h.• Ships @ 104#.

Closed Shelf Presentation CenterCat.# ZDWC-CLC$1959.00

• Lecturn, projector and document cabinet in one.• Locking doors provide security for valuable work

and documents.• Unique slide-out, locking shelf can be used with a

document camera for multimedia presentations.• includes a four-outlet electrical assembly with

surge protector.• Primarily designed for standing or use with a stool.• Overall dimensions: 30"w x 18"d x 45"h.• Ships @ 140#.

Presentation CartsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Page 39: Fusion Catalog

38

Department Workspaces (lecterns)

Equipment is shown for illustration and is not included.

Streamline PodiumCat.# ZDWL-BT $370.00

Tilt-Top Height Adjustable PodiumCat.# ZDWL-TA $220.00

• Upscale and modern design.• Light gray top with brushed

silver powder coat steel base.• Convenient storage shelf

underneath top.• Includes 3" casters (2 locking).• Overall dimensions:

25"w x 24"d x 443⁄4"h.• Ships @ 36#.

• Tilt top with padded wrist rest.• Black top with black powder

coat steel base.• For laptops or keyboards.• Includes 2" casters (2 locking).• Variable height dimensions:

221⁄2"w x 18"d x 27"-43"h.• Ships @ 25#.

Fixed HeightSound Powered LecternCat.# ZDWL-SP $1160.00

Adjustable HeightSound Powered LecternCat.# ZDWL-HA $1460.00• Lectern with built-in, full-power sound system.

• System includes:- 50-watt amplifier (can reach audiences up to 2000),- Wireless microphone,- four-speaker system with asthetic cover,- LED light is included.

• Features an attractive natural cherry laminate.• Includes recessed casters (2 locking).• Lectern dimensions:

- Fixed height model: 22"w x 17"d x 421⁄2"h,- Adjustable height model: 22"w x 17"d x 421⁄2"h-521⁄2"h.

• Fixed height ships @ 66# / Height adjustable ships @ 76#.

(10" height adjustmentwith convenient gas spring)

(Amplifier andcasters shown)

(Speakersshown)

Lecterns & PodiumsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Page 40: Fusion Catalog

39

Department Workspaces (conference)

Equipment is shown for illustration and is not included.

Conference TablesItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Don’t forgetthe seating!Chairs are onpages 48-51.

Top Styles

“F”=Flow

“P”=Presentation

“B”=Boat

“O”=Oval

“R”=Rectangle

Legs Styles

“S”=Slab

“C”=Curve

“P”=Post

Cat.# ZDWC-__ __ __ (+ Color Choice)

Example:Cat.# ZDWC-OC10 (graphite/black) is anOval Table with Curved Legs, 120" x 46" x 29",graphite laminate top/legs with black edging.

CONFERENCE TABLE BUILDERTop Style (F, P, B, O or R)

Leg Style (S, C or P)

Size (6, 8, 10, 12)

black graphite silicon khaki maple wild cherry mahogany

black aluminum black slate khaki

Top Surface Laminates (for all TOPS and Slab & Curve LEGS / other colors available)

Leg Colors (for Post Legs ONLY) Edge Colors

• Get down to business with the right spaceto fit your creative minds.

• Choose from five top styles, three legstyles and a number of color options.

• Sizes to fit your team of 6 to 12 membersin comfort and efficiency.

• Manufactured of high quality, durable materials that are built to last.

Number Flow/Presentation Oval/Boat/Rectangleof Seats L x W x H L x W x H

6 72" x 46" x 29" 72" x 36" x 29"8 96" x 46" x 29" 96" x 44" x 29"10 120" x 48" x 29" 120" x 46" x 29"12 144" x 54" x 29" 144" x 48" x 29"

(Call for pricing)

Top Size Chart

Page 41: Fusion Catalog

40

Department Workspaces (conference)

Conference SupportItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Conference CredenzaCat.# ZDWC-CZA$850.00

Video Presentation Cabinet(partially enclosed)Cat.# ZDWC-VPE$1090.00

Video Presentation Cabinet(fully enclosed)Cat.# ZDWC-VFE$1150.00

• Ideal and stylish storage area for conference materials.• Choose a laminate color to match your conference table.• Two levels inside are created by adjustable shelves.• Features black metal pulls and non-marring floor glides.• Easy cam-lock assembly.• Overall dimensions: 48"w x 18"d x 29"h.• Ships @ 145#.

• Stylish display and storage area for conference video materials.• Doors open 270º to fully wrap around the sides of the cabinet.• Accommodates TV size up to 297⁄8"w x 243⁄4"d x 27"h.• Choose a laminate color to match your conference table.• Three levels inside are created by adjustable shelves.• Features black metal pulls and non-marring floor glides.• Easy cam-lock assembly.• Overall dimensions: 32"w x 24"d x 67"h.• Ships @ 240#.

• Same overall specs as the partially closed model above, exceptthat the TV area is concealed when the doors are closed.

• Overall dimensions: 32"w x 24"d x 67"h.• Ships @ 250#.

black graphite silicon khaki maple wild cherry mahogany

High Pressure Laminates (other colors available)

Equipment is shown for illustration and is not included.

Page 42: Fusion Catalog

41

Department Workspaces (visual center)

Equipment is shown for illustration and is not included.

Conference SupportItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Presentation CabinetCat.# ZDWC-PTO (Oak Laminate)Cat.# ZDWC-PTM (Mahogany Laminate)$499.00

• Space saving “roll top” style tambour door enclosure makes this cabinet a handsome addition to any work or meeting area.

• Dry-erase surface allows smooth writing andeasy erasing.

• Surface is also magnetic for added versatility.• Doors lock to secure confidential information.• Overall dimensions: 44"w x 32"h x 4"d.• Ships @ 60#.

Presentation CabinetCat.# ZDWC-PDO (Oak Laminate)Cat.# ZDWC-PDM (Mahogany Laminate)$1199.00

Bulletin Board CabinetCat.# ZDWC-PC24 (24"w x 36"h x 11⁄2"d @ 20#)$219.00

Cat.# ZDWC-PC46 (46"w x 34"h x 11⁄2"d @ 35#)$365.00

• Hinged doors open to display a 4-foot widemarker boad flanked by two cork boards(mounted on the inside of each door).

• Dry-erase surface allows smooth writing andeasy erasing.

• Surface is also magnetic for added versatility.• Overall dimensions: 48"w x 48"h x 5"d.• Ships @ 116#.

Optional Projection ScreenCat.# ZDWC-PDS$149.00• Retractable 40" x 40" projection screen

mounts inside the upper recess of either the ZDWC-PDO or ZDWC-PDM cabinet.

• Recoils neatly out of the way when not in use.

• Locking doors provide tamper-proof postingof notes, messages and bulletins.

• Constructed of real Oak with a 100% naturalcork tack surface.

• Features acrylic door panels for easy viewing.

Sliding Doors

Hinged Doors

Don’t forget flat screenwall mounts for your videodisplay options; page 27.

Page 43: Fusion Catalog

42

Department Workspaces (message boards)

EZ-Ritertm Dry-Erase Board• Ideal for planning, scheduling, messages, diagrams, etc.• Subtle silver GRID, visible only up close, enables easy line & chart drawing.• PVC coated steel provides exceptional dry-erase surface.• Magnetic sheet is laminated to moisture resistant 1⁄4" MDF.• Full length marker tray comes with plastic end caps.• Anodized aluminum frame comes with plastic corner caps.• Includes one set of dry-erase markers.• Crating and removable polyfilm coating assures safe delivery.• Ten-Year Warranty.

Slim-Line Dry-Erase Board• Dry-Erase board is a quick and easy way to post

current information.• Slim-Line style hangs vertically or horizontally.• Ideal for small workspaces, doorways and aisles.• Two interior panels provide a total of six surfaces.• Magnetic surface can be used to hold notes,

memos and schedules.• Wall-mounting hardware is included.

Rubber-Taktm Bulletin Board• Ideal for reports, messages, displays, etc.• Manufactured from high-density 100% recycled rubber.• Unmatched durability and resiliency.• Longer lasting than cork; self-healing and non-porous.• Textured surface will not show pinholes for years of service.• Resists moisture, mold, mildew, bacteria and chemicals.• Neutral black/gray colors are framed in anodized aluminum.• Stain resistant and easy to maintain.

Dry Erase MarkersCat.# ZBDE-4M$9.90• Optimized for best results.• Set of 4 (R,B,G,Blk).

Dry EraserCat.# ZBDE-ER$9.90• Gives a clean,

dust-free finish.

cat.# h x l ships @ price

ZDWM-DE48 333⁄4" x 48" 20# $175.00ZDWM-DE72 48" x 72" 48# $285.00ZDWM-DE96 48" x 96" 60# $365.00

cat.# h x l ships @ price

ZDWM-BB72 48" x 72" 66# $275.00ZDWM-BB96 48" x 96" 88# $345.00

cat.# h x l ships @ price

ZDWM-SL24 24" x 81⁄2" 5# $29.00

Message BoardsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Page 44: Fusion Catalog

43

Department Workspaces (break room)

Break Room TablesItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Don’t forgetthe seating!Chairs are onpages 48-51.

black graphite silicon khaki maple wild cherry mahogany

black black slate khaki

Top Surface Laminates (other colors available)

Leg Color Edge Colors

Table Selections

Multi-Purpose Tables• Excellent tables for breakrooms and other

high-use areas.• Choose from three styles and a number of

color options.• Built to last of high-quality, commercial

grade materials.• Durable tops of high-pressure laminate.

cat.# shape size

ZDWB-C2400 circular 24" dia.ZDWB-C4200 circular 42" dia.ZDWB-S4242 square 42" x 42"ZDWB-R4224 rectangle 42" x 24"ZDWB-R9630 rectangle 96" x 30"ZDWB-R9636 rectangle 96" x 36"

(Call for pricing)

Page 45: Fusion Catalog

44

Department Workspaces (utility carts)

Equipment is shown for illustration and is not included.

Utility CartsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Steel TV/AV CartCat.# ZDWU-TV$570.00

Multi-Cart KitCat.# ZDWU-MK$295.00

Steel Utility CartCat.# ZDWU-TT (open frame)$340.00

Cat.# ZDWU-TC (with cabinet)$420.00

• Supports CRT TVs up to 36" diagonal.

• Includes UL/CSA approved 4-outlet power strip.

• Black powder coat steel frame.

• Moves on 4" casters (two locking).

• Overall dimensions: 38"w x 31"d x 44"h.

• Ships @ 96#.

• Available in 3-shelf open frame or lockable cabinet models.

• Includes UL/CSA approved 4-outlet power strip.

• Black powder coat steel frame.• Moves on 4" casters (two locking).• Overall dimensions:

24"w x 18"d x fixed height between 26"-42"h.

• Open frame ships @ 49#,Cabinet frame ships @ 64#.

• Six potential carts in one; you build the one which bestsuits your specific needs.

• Adjustable to four heights: 16", 24", 34", or 42".• Includes removable wall panels.• Includes UL/CSA approved 4-outlet power strip.• Constructed of high-impact, injection molded plastic.• Moves on 4" casters (two locking).• Size: 24"w x 18"d x fixed height between 16"-42"h.• Kit ships @ 35#.

Build any one of the carts below from this one kit!

Page 46: Fusion Catalog

45

Department Workspaces (stands)

Printer/Fax StandsItems on this page are best consideredfor use in these areas (see bold italics):training room / conference room / reception area / office / breakroom

Enclosed Printer/Fax CartCat.# ZDWP-EC$249.00

• Enclosed cabinet keeps supplies clean and organized.• Includes shelves and wire basket on door.• Constructed of light gray, scratch-resistant laminate.• Moves on 2" casters (two locking).• Overall dimensions: 171⁄2"w x 171⁄2"d x 265⁄8"h.• Ships @ 55#.

• Saves desktop space.• Keeps paper organized.• Includes four casters.• Ships @ 18#.

• Saves desktop space.• Keeps paper clean and organized.• Stylish, contemporary design.• Ships @ 8#.

Dot Matrix/Laser CartCat.# ZDWP-DM$375.00

Desktop Printer StandCat.# ZDWP-PP$165.00

Printer/Small Fax StandCat.# ZDWP-PM$69.00

Multi-Purpose CartCat.# ZDWP-MP$350.00

• Accommodates any type ofprinter or fax machine.

• Middle shelf slides 2".• Wire tray provides paper

storage or matrix paper feed.• 2" casters (two locking).• Overall dimensions:

30"w x 38"d x 33"h.• Ships @ 59#.

• Use as a printer/fax cart oras a stand-up workstation.

• Retractable shelf can bemounted high or low andslides in and out 18".

• 3" casters (two locking).• Overall dimensions:

251⁄8"w x 20"d x 421⁄2"h.• Ships @ 46#.

Equipment is shown for illustration and is not included.

Page 47: Fusion Catalog

46

Digital Support Carts

Equipment is shown for illustration and is not included.

Unsure of your application? Call us for recommendations orcustom design configurations.

Cat.# DSC-1812A $575.00 Cat.# DSC-1821A

Cat.# DSC-1812B $595.00 Cat.# DSC-1821B

18" Wide Base withLaminate Top forCR readers, digitizers,viewers, monitors,keyboards, and othersupport or mobileequipment.

DIGITAL SUPPORT CARTS• Two sizes of carts (not including the tops):

- 18"wide x 20"deep x 381⁄4"tall,- 24"wide x 20"deep x 381⁄4"tall.

• Three interior configurations:- open shelf over large shelf w/dividers,- large shelf w/dividers over open shelf,- three open shelves.

• Height of open shelf is 9".

• Height of shelf w/dividers is 20".

• Height of three open shelves: 9"/10"/9".

• Widths of 18" cart divided spaces are 3"/3"/12".

• Widths of 24" cart divided spaces are 6"/6"/12".

• Four sizes of laminate tops (choose the best foryour application).

• All carts feature three cable holes in the backat each shelf level.

• Laminate top includes a hole for adding theDSM-MCP monitor mount.

TOP "B"25"wide x 25"deepCompatible suggestions:- Vidar Diagnostic ProAdvantage- Kodak DryView 5800/5850- Fuji DryPix 2000- Konica/Minolta DryPro 832- Codonics® Horizon

TOP "A"20"wide x 22"deepCompatible suggestions:- Vidar Sierra Plus- Radlink LaserPro 16- LogicRad- AllPro Imaging SCAN12- Protec ProScan35

Digital Support Cart

Also available

in Neutral Tone

Gray!

Page 48: Fusion Catalog

47

Digital Support Carts

Equipment is shown for illustration and is not included.

Cat.# DSC-2412D $745.00 Cat.# DSC-2421D

Cat.# DSC-2412C $695.00 Cat.# DSC-2421C

Cat.# DSC-2412E $785.00 Cat.# DSC-2421E

Imaging Printer CartCat.# DSC-P21A$525.00 • 24" x 24" x 181⁄4"h.

• Includes two utilityshelves.

• All steel.• Four casters

(two locking).

24" Wide Base withLaminate Top forCR readers, digitizers,viewers, monitors,keyboards, and othersupport or mobileequipment.

TOP "E"36"wide x 21"deepCompatible suggestions:- iCRCO 612SI/2000SL- Agfa DryStar 5300- AllPro ScanX 14- iCRCO ICR3600

TOP "D"30"wide x 30"deepCompatible suggestions:- Kodak DryView 5800/5850- Array 2905- AllPro ScanX 14- Agfa CR30 / Quantum CR30- Kodak CR120/140/260/500- Sony Filmstation

TOP "C"25"wide x 25"deepCompatible suggestions:- Vidar Diagnostic ProAdvantage- Kodak DryView 5800/5850- Fuji DryPix 2000- Konica/Minolta DryPro 832- Codonics® Horizon

Monitor Support for All 18" or 24" CartsCat.# DSM-MCP $340.00

(carts must be ordered separately)

Keyboard SupportCat.# DSK-24KP $219.00(carts ordered separately)• Recessed/retractable

keyboard with gel pad and swivel mouse tray.

• Order at the time of ordering cart.• Fits into ONLY THESE CARTS:

DSC-2412C, DSC-2412D, DSC-2412E.

• Monitor post mounts intoa hole in the cart’s top.

• Height adjusts with ascrew crank so that stability is maintainedduring rolling vibrations.

• Includes standard VESAmount.

• Leaves room for equip-ment or keyboard on topof the cart.

Digital Support Cart

Cat.# DSC-2412AMK$1195.00This cart includesthe monitor/keyboard assembly for use with Afga CR30 and similarmodels.(Agfa unit not included.)

Page 49: Fusion Catalog

48

FUSION Seating (premier)

Cat.# ZBCH-SPA$745.00

• Dual full-floating lumbar supportpanels curve naturally with spine.

• Includes adjustable headrest.• Pneumatic lift: 16"-20".• Contoured and padded seat.• Multi-action mechanism for

maximum comfort.• Five-star caster base.• Durable and stain-resistant fabric.• 2-year limited warranty.• (Black only) Ships @ 47#.

Spine-Line

Ergonomic Chair with Extra Lumbar Support!

HÅG Capiscotm

The chair withthe unique

saddle seat!HÅG Capiscotm

• Available with or without back; with or without footring.• Balanced Movement MechanismTM includes: pneumatic height adjustment,

seat & back tilt as a unit, backward tilt tension, two-position tilt lock,seat depth and back height adjustment.

• Unique embedded footpads integrated into base.• Meets or exceeds ANSI/BIFMA standards; Limited Lifetime Warranty.

Sit in comfort with supportfrom any direction.

cat.# feature price*ZICP-MXS no back $570.00ZICP-MMS with back $1160.00

cat.# feature price*ZICP-SXS no back $585.00ZICP-SMS with back $1185.00

Chair(seat height: 16"-211⁄2")

cat.# feature price*ZICP-RXS no back $690.00ZICP-RMS with back $1345.00

Chair w/footring(seat height: 16"-211⁄2")

Stool(seat height: 221⁄2"-32")

cat.# feature price*ZICP-LXS no back $745.00ZICP-LMS with back $1395.00

Stool w/footring(seat height: 221⁄2"-32")

Fabricspage 51

(*Price is for Grade 2 Fabric ONLY. Please call for prices on Grade 4 and Leather.)

Page 50: Fusion Catalog

49

FUSION Seating (premier)

Ergo Extra

Cat.# ZBCH-EXB$670.00

• Contouring mesh back.• Adjustable lumbar support.• Adjustable headrest.• Pneumatic lift.• Swivel/tilt tension.• Seat fwd/bwd glide.• Independent seat/back tilt.• Adjustable arms.• Five-star caster base.• 2-year limited warranty.• (Black only) Ships @ 49#.

Ergonomic Chair with Extra Lumbar Support!

Fabricspage 51

executive back shownmesh back shown

cat.# style fabric price

ZSCH-MM2 Champion Mesh Back w/ Grade 2 seat $995.00ZSCH-MM4 Champion Mesh Back w/ Grade 4 seat $1050.00ZSCH-MML Champion Mesh Back w/ Leather seat $1195.00ZSCH-UM2 Champion Upholstered w/ Grade 2 $995.00ZSCH-UM4 Champion Upholstered w/ Grade 4 $1090.00ZSCH-UML Champion Upholstered w/ Leather $1295.00

cat.# style fabric price

ZSCE-ES2 Celebrity: Executive back Grade 2 $985.00ZSCE-ES4 Celebrity: Executive back Grade 4 $995.00ZSCE-ESL Celebrity: Executive back Leather $1495.00ZSCE-HS2 Celebrity: high back Grade 2 $895.00ZSCE-HS4 Celebrity: high back Grade 4 $950.00ZSCE-HSL Celebrity: high back Leather $1395.00

Celebritytm

• Exceptional comfort and style.• Executive overall height: 47"-53"; back: 30".• Executive back features extended headrest.• High-back overall height: 43"-49"; back: 261⁄2".• High-back features 21⁄2" internal back height adjustment.• Black base shown, but priced with polished aluminum.• Meets or exceeds ANSI/BIFMA standards.

Championtm

• Hyperbolic mesh contours to body types; reduces fatigue.• Innovative shell creates flex zones to support user’s back.• Mesh back: interwoven mono/multi-filament Elastomer.• Upholstered back: full back pad replaces mesh.• Overall height: 343⁄4"-411⁄4".• Button adjustable arms with 3” height range.• Internal back height adjustment of 21⁄2".

FREE SHIPPING !!!

for Championtm and

Celebritytm seating!

Championtm

High-TechComfort

Celebritytm

SophisticatedPerformance

Page 51: Fusion Catalog

50

FUSION Seating (comfort)

Comfort Seating

Premium, Comfort & Utility Seating SPECS

model back mechanism arms base set up warranty

Champion high multi-task ht. adj. black nylon yes FF-5/lifeCelebrity executive swivel/tilt fixed polished alum yes FF-5/lifeCelebrity high swivel/tilt ht. adj. polished alum yes FF-5/lifeTurbo mid swivel/tilt cantilever black nylon yes FF-5/lifeCharger high swivel/tilt ht. adj. black nylon yes FF-5/lifeTrophy mid swivel/tilt ht. adj. black nylon yes FF-5/lifeDerby mid swivel/tilt ht. adj. black nylon no FF-5/lifeDerby Stool small independent none black nylon no FF-5/lifeUniversal Stool small swivel none black nylon no 2 yearsRibbon small n/a fixed black 4-leg yes 10 yearsTilt-Back small n/a fixed chrome sled yes 2 years

• Swivel/tilt: pneumatic height adjustment, internal back height adjustment,360º swivel, seat & back tilt as one unit, heavy-duty tension adjustment.

• Multi-task: same as swivel/tilt, PLUS: forward tilt with tilt lock, back adjustsindependently of seat with infinite lock.

• Independent: pneumatic height adjustment, internal back adjustment, 360ºswivel, seat & back adjust independently with infinite lock, forward tilt.

• Warranty: FF-5/life = foam & fabric 5-years/all other parts lifetime.

Turbotm

• Makes an ideal conference room chair.• Mid-back height: 21".• Cantilever arms provide both style and comfort.

Chargertm

• Hard working chair for the long haul.• High-back height: 24".• Contoured seat & back with resilient molded foam.

Trophytm

• Features body-cradling contours and ergonomic comfort.• Mid-back height: 211⁄2".• Contoured seat & back with resilient molded foam.

Derbytm

• Popular and affordable task chair.• Mid-back height: 20".• Outer back shell of high impact black polypropylene.

[Additional options are available. Call for inquiry.]

Trophytm DerbytmTurbotm Chargertm

Comfort Seating is ideal for Workstations, Conference Rooms or everyday tasks.

Fabricspage 51

cat.# model fabric price

ZSTO-MS2 Turbo Grade 2 $685.00ZSTO-MS4 Turbo Grade 4 $735.00ZSTO-MSL Turbo Leather $1125.00ZSCG-HS2 Charger Grade 2 $750.00ZSCG-HS4 Charger Grade 4 $795.00ZSCG-HSL Charger Leather $1260.00ZSTR-MS2 Trophy Grade 2 $810.00ZSTR-MS4 Trophy Grade 4 $875.00ZSTR-MSL Trophy Leather $1270.00ZSDE-MS2 Derby Grade 2 $595.00ZSDE-MS4 Derby Grade 4 $630.00

Page 52: Fusion Catalog

51

FUSION Seating (stools & sides)

Utility Seating

Ribbontm

Tilt-Back

Derbytm Stool Universal Stool

Grade 4Fabric

Grade 2Fabric

Leather

Seating Upholstery(other fabrics are available)

black pewter sapphire garnet hunter green

oasis zest sky festive leaf

onyx chocolate indigo crimson harvest

coal slate deep blue maroon forest green

Fabricsbelow

cat.# model fabric price each

ZSDS-SI2 Derby Stool Grade 2 $695.00ZSDS-SI4 Derby Stool Grade 4 $725.00ZBCH-USB Unniversal Stool Urethane $299.00ZSRB-SN2 Ribbon(min.4) Grade 2 $395.00ZSRB-SN4 Ribbon(min.4) Grade 4 $415.00ZBCH-TBB Tilt-Back(set of 4) Blk plastic $499.00ZBCH-TBG Tilt-Back(set of 4) Gry plastic $499.00

Derbytm Stool• Popular and affordable quality.• Counter height comfort work solution; small back.• Overall height: 361⁄2"-491⁄2"; seat height: 20"-31".• Choose upholstery option.

Universal Stool• Self-skinned urethane seat & back (black only).• Pneumatic lift adjusts seat from 22" to 32".• Height adjustable footring / height adjustable back.

Ribbontm Side Seating• 7⁄8" black tubular steel frame.• Can be stacked for easy storage.• Affordable (four chair minimum order).

Tilt-Back Side Seating• Unique tilt-back automatically conforms to user.• Solid iron rod frame formed into a sled base.• Can be stacked for easy storage.• Affordable (four chair minimum order).

Page 53: Fusion Catalog

AArticulating monitor arms.....................21AV podiums .............................................36

BBreak room tables .................................43Bulletin boards..................................41-42Bundles, desks .......................................15

CCable management................................29Casters.....................................................31Ceiling monitor/display mounts ...........23Chairs .................................................48-51Charging cart, laptop.............................34Colors charts:

chairs ...........................................51desks..........................19, 39, 40, 43

Conference support furniture.........39-41Conference Table...................................39CPU holders ............................................28CR-support carts ..............................46-47Credenza .................................................40Cup holder ...............................................30

DDesks ...................................................4-18Desks accessories:

bundles ........................................15

D con’tcolors ...........................................19electric ...............................4-15, 18manual....................................16-18pedestal.......................................18

Desktop monitor supports...............20-23Digital support carts ........................46-47Dry erase boards and cabinets......41-42

EElectric desks................................4-15, 18Electric monitor supports .....................22Extension arm monitor supports .........20

FFax stands ...............................................45File drawers ............................................31Flat screen supports........................23, 27Flip-up keyboard workstations ............25Footrests..................................................31Fusion-Vue monitor support.................22

HHolders:

copy..............................................30cup................................................30telephone ....................................30

IIlluminators .............................................22

KKeyboard Supports ................................28

LLamps .................................................32-33Laptop:

carts........................................34-35charging station .........................34drawer .........................................30desk supports .............................21locker ...........................................30wall mount...................................23

LCD suports.......................................23, 27Lecturns...................................................38Lighting...............................................32-33

MManual desks....................................16-18Mobile workstations ........................26-27Monitor supports ..............................20-23Multi-Direction Monitor Supports.......21

PPedestal Desks.......................................18Pedestal drawers...................................31Pencil drawer .........................................30Podiums.............................................36, 38Power cords ...........................................29

P con’tPower grommet......................................29Presentation boards, dry erase .....41-42Presentation cabinets ...........................41Presentation carts .................................37Printer/fax stands ..................................45

SSeating ...............................................48-51Stools ................................................48, 51Surge protectors ....................................29

TTable, break room ..................................43Table, conference ..................................39Telephone support .................................30

UUtility carts ..............................................44

VVideo cabinets........................................40View boxes..............................................22

WWall mount workstation ..................23-25Workstations:

mobile.....................................26-27wall mount .............................24-25

Cat.# . . . . . . . . . .Page No.DSC-18XXX . . . . . . . . .46DSC-2412AMK . . . . . . .47DSC-24XXX . . . . . . . . .47DSC-P21A . . . . . . . . . . .47DSK-24KP . . . . . . . . . . .47DSM-MCP . . . . . . . . . . .47VVD-20 . . . . . . . . . . . . .22VVD-21 . . . . . . . . . . . . .22VVS-10 . . . . . . . . . . . . .22VVS-11 . . . . . . . . . . . . .22ZAC2-SE . . . . . . . . . . . .31ZAC3-KE . . . . . . . . . . . .31ZAC3-SM . . . . . . . . . . . .31ZACM-CB . . . . . . . . . . .29ZACM-CW . . . . . . . . . . .29ZACM-P24 . . . . . . . . . . .29ZACM-P36 . . . . . . . . . . .29ZACM-P60 . . . . . . . . . . .29ZACM-PG . . . . . . . . . . .29ZACM-SC . . . . . . . . . . .29ZACM-SS . . . . . . . . . . .29ZADA-CP . . . . . . . . . . . .30ZADA-CS . . . . . . . . . . . .30ZADF-BF . . . . . . . . . . . .31ZADF-30 . . . . . . . . . . . .31ZADU-PD . . . . . . . . . . .30ZAFR-BA . . . . . . . . . . . .31ZBCH-EXB . . . . . . . . . .49ZBCH-SPA . . . . . . . . . .48ZBCH-TBB . . . . . . . . . .51ZBCH-TBG . . . . . . . . . .51ZBCH-USB . . . . . . . . . .51ZBDE-4M . . . . . . . . . . . .42ZBDE-ER . . . . . . . . . . . .42ZBLC-10 . . . . . . . . . . . .34ZBLC-20 . . . . . . . . . . . .34ZBLM-100 . . . . . . . . . . .34ZBLM-150 . . . . . . . . . . .34ZBLM-MC . . . . . . . . . . .35ZBLM-PB . . . . . . . . . . . .35ZBLM-PM . . . . . . . . . . .35

ZBMM-72SM . . . . . . . . .27ZBMM-72XL . . . . . . . . .27ZBMM-AGCB . . . . . . . .27ZBMM-AGKT . . . . . . . . .27ZBMM-AGUS . . . . . . . .27ZBMM-AMCH . . . . . . . .27ZBMM-MS1P . . . . . . . . .27ZBMM-MS1S . . . . . . . . .27ZBMM-MS1X . . . . . . . . .27ZBMM-MS2B . . . . . . . . .27ZBMM-MS3B . . . . . . . . .27ZBMW-LCP . . . . . . . . . .35ZBMW-LMC . . . . . . . . . .35ZCVD-E . . . . . . . . . . . . . .8ZCVU-E . . . . . . . . . . . . . .8ZDCF-E . . . . . . . . . . . . .10ZDME-E . . . . . . . . . . . . .11ZDMS-E . . . . . . . . . . . . .11ZDSF-E . . . . . . . . . . . . .10ZDWA-FH . . . . . . . . . . .36ZDWA-HA . . . . . . . . . . .36ZDWA-GB . . . . . . . . . . .36ZDWA-GX . . . . . . . . . . .36ZDWA-TB . . . . . . . . . . .36ZDWA-TX . . . . . . . . . . .36ZDWB-C2400 . . . . . . . .43ZDWB-C4200 . . . . . . . .43ZDWB-R4224 . . . . . . . .43ZDWB-R9630 . . . . . . . .43ZDWB-R9636 . . . . . . . .43ZDWB-S4242 . . . . . . . .43ZDWC-BXX . . . . . . . . . .39ZDWC-CLC . . . . . . . . . .37ZDWC-CLO . . . . . . . . . .37ZDWC-CZA . . . . . . . . . .40ZDWC-FXX . . . . . . . . . .39ZDWC-OXX . . . . . . . . . .39ZDWC-PC24 . . . . . . . . .41ZDWC-PC46 . . . . . . . . .41ZDWC-PDO . . . . . . . . . .41ZDWC-PDM . . . . . . . . .41ZDWC-PDS . . . . . . . . . .41

ZDWC-PTM . . . . . . . . . .41ZDWC-PTO . . . . . . . . . .41ZDWC-PXX . . . . . . . . . .39ZDWC-RXX . . . . . . . . . .39ZDWC-MBP . . . . . . . . . .37ZDWC-VFE . . . . . . . . . .40ZDWC-VPE . . . . . . . . . .40ZDWL-BT . . . . . . . . . . .38ZDWL-HA . . . . . . . . . . .38ZDWL-SP . . . . . . . . . . .38ZDWL-TA . . . . . . . . . . . .38ZDWM-BB72 . . . . . . . . .42ZDWM-BB96 . . . . . . . . .42ZDWM-DE48 . . . . . . . . .42ZDWM-DE72 . . . . . . . . .42ZDWM-DE96 . . . . . . . . .42ZDWM-SL24 . . . . . . . . .42ZDWP-DM . . . . . . . . . . .45ZDWP-EC . . . . . . . . . . .45ZDWP-MP . . . . . . . . . . .45ZDWP-PM . . . . . . . . . . .45ZDWP-PP . . . . . . . . . . .45ZDWU-MK . . . . . . . . . . .44ZDWU-TC . . . . . . . . . . .44ZDWU-TT . . . . . . . . . . .44ZDWU-TV . . . . . . . . . . .44ZEDA-CPUC . . . . . . . . .28ZEDA-CPUU . . . . . . . . .28ZEDA-FR03 . . . . . . . . . .31ZEDA-FR06 . . . . . . . . . .31ZEKS-KE06 . . . . . . . . . .28ZEKS-KS07 . . . . . . . . . .28ZEKS-KX16 . . . . . . . . . .28ZELA-DTLH . . . . . . . . . .30ZELA-LPLD . . . . . . . . . .30ZELA-SALH . . . . . . . . . .21ZELA-VALS . . . . . . . . . .21ZELA-VLMC . . . . . . . . .21ZELA-WALT . . . . . . . . . .23ZELD-DTFS . . . . . . . . . .32ZELD-DTLW . . . . . . . . .32ZELD-FLDX . . . . . . . . . .32

ZELU-DXXX . . . . . . . . .33ZELU-FLXX . . . . . . . . . .33ZELU-LEXX . . . . . . . . . .33ZEMS-AAMS . . . . . . . . .20ZEMS-HDA1 . . . . . . . . .21ZEMS-HDA2 . . . . . . . . .21ZEMS-LGTV . . . . . . . . .27ZEMS-MC21 . . . . . . . . .20ZEMS-MC22 . . . . . . . . .20ZEMS-MF24 . . . . . . . . .20ZEMS-MF26 . . . . . . . . .20ZEMS-SA21 . . . . . . . . .21ZEMS-SA22 . . . . . . . . .21ZEMS-SF21 . . . . . . . . . .20ZEMS-SF22 . . . . . . . . . .20ZEMS-SF23 . . . . . . . . . .20ZEMS-SV21 . . . . . . . . .21ZEMS-WA21 . . . . . . . . .23ZEMS-WAXR . . . . . . . . .23ZEMS-WFXP . . . . . . . . .23ZEMW-M500 . . . . . . . . .26ZEMW-M750 . . . . . . . . .26ZEVW-AXXX . . . . . . . . .24ZEVW-EXXX . . . . . . . . .24ZEVW-SS21 . . . . . . . . .25ZEVW-TS31 . . . . . . . . .25ZICP-XXXX . . . . . . . . . .48ZKCS-BC60 . . . . . . . . . .15ZKDL-FFL . . . . . . . . . . .32ZKDL-FHL . . . . . . . . . . .32ZKEA-XXXX . . . . . . . . .14ZKEC-XXXX . . . . . . . . .14ZKRA-BA60 . . . . . . . . . .15ZKTA-BB72 . . . . . . . . . .15ZKTA-XXXX . . . . . . . . . .13ZKTC-XXXX . . . . . . . . .13ZKTS-XXXX . . . . . . . . .12ZKTU-XXXX . . . . . . . . .12ZKUH-CL . . . . . . . . . . . .28ZKUH-LK . . . . . . . . . . . .28ZKVW-MA-811 . . . . . . . .24ZKVW-MOB . . . . . . . . . .26

ZKVW-WAL . . . . . . . . . .24ZLCD-C . . . . . . . . . . . . .16ZLCD-E . . . . . . . . . . . . . .4ZLCU-C . . . . . . . . . . . . .16ZLCU-E . . . . . . . . . . . . . .4ZLLS-DSLB . . . . . . . . . .26ZLLS-DSLS . . . . . . . . . .26ZLLS-OCLB . . . . . . . . . .26ZLLS-OCLS . . . . . . . . . .26ZLMS-C . . . . . . . . . . . . .16ZLMS-E . . . . . . . . . . . . . .6ZLMS-FPCM36 . . . . . . .23ZLMS-FPCM48 . . . . . . .23ZLMS-FPCM60 . . . . . . .23ZLMS-FPCM72 . . . . . . .23ZLMS-FV2 . . . . . . . . . . .22ZLMS-FV3 . . . . . . . . . . .22ZLMS-FV4 . . . . . . . . . . .22ZLMS-OCMB . . . . . . . . .22ZLMS-OCMS . . . . . . . . .22ZLSD-C . . . . . . . . . . . . .17ZLSD-E . . . . . . . . . . . . . .5ZLSU-C . . . . . . . . . . . . .17ZLSU-E . . . . . . . . . . . . . .5ZMPE-E . . . . . . . . . . . . . .9ZPCV-EXXXX . . . . . . . .18ZPCV-SXXXX . . . . . . . .18ZPSH-EXXXX . . . . . . . .18ZPSH-SXXXX . . . . . . . .18ZSCE-XXX . . . . . . . . . .49ZSCG-XXX . . . . . . . . . .50ZSCH-XXX . . . . . . . . . .49ZSDE-XXX . . . . . . . . . .50ZSDS-XXX . . . . . . . . . .51ZSRB-XXX . . . . . . . . . .51ZSTO-XXX . . . . . . . . . .50ZSTR-XXX . . . . . . . . . . .50ZWCF-E . . . . . . . . . . . . .7ZWWV-C7736 . . . . . . . .17ZWWV-E7736 . . . . . . . . .7

General Index