Fusing - Art glass › Content › documents › Fusing...fusing and silver clays. Suitable for...

Fusing Tools & Accessories

Product Catalog

Artist Robert Wiener

Artist Nancy Bonig

www.dlartglass.com 303.449.8737 • 800.525.0940 ©

20

19 D

&L

Art

Gla

ss S

uppl

y

Fusing Tools & Accessories

Product Catalog

®

800.525.0940 • 303.449.8737 © 2019 D&L Art Glass Supply®

Table of Contents

Kilns .......................................................................... 1-16Tabletop Kilns .......................................................................................................... 1–3120 Volt Kilns ............................................................................................................1-5240 Volt Kilns ........................................................................................................ 6-12Kiln Controllers at a Glance .....................................................................................13Kiln Shelves .......................................................................................................... 14–15Kiln Furniture and Accessories ................................................................................16

Kiln Working Supplies ....................................... 17-20Primers & Shelf Paper ...............................................................................................17Fiber Products & Release Sprays ........................................................................... 18Holding Agents, Glues & Glazes ..............................................................................19Glass Powder and Enamel Mediums ................................................................... 20

Paints & Enamels ................................................. 21-33Color Line ............................................................................................................ 21-22Colors for Earth .........................................................................................................23Glassline ............................................................................................................... 24-25Fuse Master ..........................................................................................................26-27Reusche .......................................................................................................................28Hues to Fuse, Mica Powder, Glow Pigment .........................................................29Thompson Enamels ................................................................................................ 30Flexi-Glass ................................................................................................................. 30Non-Firing Paints & Stains .......................................................................................31Dichroic Extract .........................................................................................................32Glass Tattoo, Modeling Glass, NO Days Products .............................................33

Series: Colorbar Murrine SeriesTitle: Summer SalsaSize: 6" square (approx.)Website: www.dcartglass.comPhotographer: Pete Duvall

Cover - Artist: Robert Wiener, DC Art Glass

About the Artwork

Title: Distant FogSize: 6 x 8"Website: www.alicegebhart.com

Table of Contents- Alice Benvie Gebhart

Continued on next page

© 2019 D&L Art Glass Supply® www.dlartglass.com

Tools & Accessories ............................................34-38HEPA Vacuum, Dust Masks /Respirators ............................................................34Airbrushes, Scales, Photo Resist Products ..........................................................34Frit Handling Tools, Sorters & Sifters ...................................................................35Brushes & Pens ..........................................................................................................36Tools, Accessories, & Aids .......................................................................................37Safety Glasses & Gloves ..........................................................................................38

Fusing Decals & Inclusions ............................... 39-45Decals: Lo-fire, Hi-Fire, Dicro Slide & more ................................................. 39-42Inclusion Paper, High Temperature Wire, Foils ...................................................43Fused Glass Shapes ...........................................................................................44-45

Jewelry Bails, Findings & Displays ..................46-64Bails .......................................................................................................................46-48Earring Bails ........................................................................................................ 49-50Pendants ......................................................................................................................51Sterling Silver Snake Chains ...................................................................................52Chains, Chokers and Cords ............................................................................... 52-53Rings .............................................................................................................................53Bar Pins, Brooches and Snap & Switch Sets ........................................................54Bracelet Blanks ..........................................................................................................55Belt Buckle Blanks.....................................................................................................56Button, Zipper Pulls, Cuff Links, Bead Bails ........................................................57Nail Files and Spa Bars .............................................................................................58Giftware Findings & Displays ........................................................................... 59-62Key Rings, Purse Hangers and Bookmarks ..........................................................59Boxes, Bookends and more ................................................................................... 60Wine Stoppers, Glass Display Stands .............................................................61-62Hang Your Glass and Wall Mounts ........................................................................63Night Lights, Lighting Fixtures and Kits ................................................................64

Fusing Books & Videos ......................................65-68

Title: Deep Forest LandscapesWebsite: www.miriamdifiore.com

Table of Contents - Artist: Miriam Di Fiore

About the Artwork


KILNS

D&L is committed to providing the newest products in a growing industry.

Tabletop Kilns

The QuikFire 6 reaches 1000°F in 5 minutes. The small, lightweight kiln has a ceramic fiber shell with an embedded side-firing element. Use the QuikFire for fusing small projects and compatibility testing. Includes two 6" shelves, 1 lb. of separator, and a hake brush. UPS-able.

Paragon QuikFire 6

Simple rheostat/Infinite Switch controller for Par-agon QuikFire 6. Infinite Switch will also work with other kilns rated at 120V under 15 amps.

Paragon Infinite Switch Control

Item # PAR PCB1

Skutt FireBox 8

The FireBox 8 is a great small kiln for glass fusing and silver clays. Suitable for beginners, the FireBox 8 plugs into any standard 20 Amp household outlet. Includes digital pyrometer with thermocouple mounting flange. The FireBox can fire more slowly or can reach fusing temperatures in less than 20 minutes. UPS-able.

C

ID Item # Kiln DescriptionChamber Dim.

(WxLxD)Controller(See pg. 13)

Cubic Ft. Amps Volts Watts

Max. Temp.

Ship Wgt

A DTI FWCK Craft Kiln Top Load 8.5 Dia. x 3.5" D Dial/Timer 10 120 1200 1750°F 15 lb.

B PAR QF6K QuikFire 6 Top Load 6 x 6 x 6" – .13 14 120 1560 2000°F 16 lb.

C SKUTT FB8 FireBox 8 Flip Top Access 8 x 8 x 4.5" Infinite Switch .167 15 115 1725 2000°F 45 lb.

At A Glance - Tabletop Kilns

Perfect for the customer that purchased a small manual kiln and now wants a little more control over the firing. The unit can sit on the table next to the kiln or mount to the wall. It comes with the

GlassMaster LT controller (see page 13). Fea-tures: GlassFire Mode; Ramp and Hold Mode; 8" Type K thermocouple; and safety relay. Runs any kiln 15 Amps or less. Dropship only.

More Product Options

3-Key Universal Controller

Item # SKUTT GM2

B

FuseworksTM Craft Kiln

Getting started in glass fusing has never been easier with the FuseworksTM Craft Kiln. An easy to use beginner/ intermediate level craft kiln with an adjustable electronic timer. This kiln allows you to fully fuse a two layer project in as little as 15 minutes!Features include self regulated coil heating system, heat resistant wooden handle, user friendly timer. Runs on standard household outlets. UPS-able.

A

Tabletop Kilns

This excellent hobbyist and beginner kit contains everything needed to create simple fused jewelry projects, including the FuseworksTM Microwave Kiln & FuseworksTM glass.Kiln measures 3.25 H x 4.5" D with an interior fusing platform of 2.75".Includes: kiln paper - 2 pieces; FuseworksTM fusing glass assortment - 7 pieces, dichroic bits and pieces, milliefiori glass 1 oz., confetti glass 1 oz. Large & small silver and gold bails - 1 each; glass cutter, hot mitts; silver & gold earring set - 1 each, Instructions.

Item # Pk. Dim Pk. Wgt.

DTI FW848 7 x 7 x 7" 1 lb. 9 oz.

FuseworksTM Beginners Fusing Kit


See Kiln Pyrometer and Parts on page 16.

2 © 2019 D&L Art Glass Supply® www.dlartglass.com

KILN

& K

ILN

ACC

ESSO

RIES D&L is committed to providing the newest products in a growing industry.

KILN

S

2 www.dlartglass.com

KILN

S

Tabletop Kilns

Evenheat Studio 8

The Evenheat Studio 8 features a detachable top, bottom & body, viewing window. UPS-able.

C

The FireFly can go to temperatures high enough for firing porcelain and stoneware.Features include durable 2.5" thick insulating firebrick in the top & bottom; glass window with rating of 2100°F; a self-adjusting hinged lid and a built-in stand. UPS-able.

Paragon FireFly

E

Studio Pro Dual Access Design

D

Studio Pro design features dual access design which includes dual hinges for smooth and easy front or top access; built-in handles; multi-position lid vent system and a viewing window. UPS-able.

Ideal for fusing, slumping, and manipulation of small scale projects such as raking and vitrigraph.


ID Item # Kiln Description

ChamberDim.



Max. Temp.

Ship Wgt

A PAR FFDW FireFly Digital

Flip Top Access 8 x 8 x 4.5" Sentry 3-Key .167 11 120 1560 2300°F 45 lb.

B EVEN V8 V8 Detachable 8 x 8 x 6.5" Set-Pro 3-Key .24 14 120 1680 2350°F 48 lb.

B.1 EVEN V8SB – Solid Base 8 x 8" – – – – – – –

C EVEN S8V Studio 8 Detachable 8 x 8 x 4.5" Infinite Control Dial

.17 12 120 1440 1800°F 30 lb.

D EVEN SP8V Studio Pro 8 Dual Access 8 x 8 x 4.5" Infinite Control Dial

.17 12 120 1440 1800°F 30 lb.

E EVEN SP8V D3 Studio Pro 8 Dual Access 8 x 8 x 4.5" Set-Pro 3-Key .17 12 120 1440 1800°F 30 lb.

A

For information on controllers see Controllers At A Glance page 13.

Evenheat V8

B

Make your own custom stringers with ease!The Evenheat V8 multi-purpose kiln is specifi-cally designed for the vitrigraph technique. D&L offers this kiln equipped with the vitrigraph base which features a 2.75” hole. The optional solid base can be purchased for firing glass of all types & techniques. The V8 is stackable and features a corner mounted thermocouple for more usable floor space and vitrigraph pots up to 7.25". UPS-able.

B.1

Tabletop Kilns


KILNS


3800.525.0940 • 303.449.8737

KILNS

Perfect for metal clay, jewelry and glass firing. Features embedded heating elements, vented chamber with plug, cool touch handle and a sturdy, well ventilated enclosure. Equipped with a 2 x 4" view window. UPS-able.

Evenheat KingPin 88

Paragon Caldera

C - The Caldera is great for fusing, slumping and annealing. Features replaceable side heating el-ements and removable lid and base. UPS-able.C.1 - Bead Collar – Made of 2.5" thick insulating refractory firebricks & wrapped in heavy-gauge stainless. Adds 4.5" of height to main kiln. See kiln furniture on page 16.

C.1

C

Tabletop Kilns


The SC2 is a fast-firing, digital controlled mini kiln. The SC2 is ideal for silver clay, glass and enamels. The SC2 plugs into a standard 120 volt household outlet. PAR SC2BV is equipped with a bead door and window. UPS-able.

Paragon SC2

B

D


ChamberDim.



Max. Temp.

Ship Wgt

A PAR F14D Fusion 14 w/Bead Door 14 x 14 x 6.75" Sentry 3-Key .73 15 120 1800 1700°F 108 lb.

B PAR SC2 SC2 Mini Kiln 8 x 5.75 x 7.75" Sentry -3 Key 21 12 120 1440 2000°F 36 lb.

B PAR SC2BV SC2 Mini Kiln w/Bead Door

8 x 5.75 x 7.75" Sentry -3 Key 21 12 120 1440 2000°F 36 lb.

C PAR CAL Caldera w/Digital Controller

8 x 8 x 6.75" Sentry-3 Key .25 15 120 1680 2350°F 52 lb.

C.1 PAR CALBC Caldera Bead Collar 7.5 x 2" Door N/A – – – – 2000°F 14 lb

D EVEN K88BV KingPin 88 w/Bead Door 8 x 8 x 6" Set-Pro - 3 Key .22 12 120 1440 2000°F 40 lb.

E JK PF16 ProFusion 16

All Fiber/Clamshell

16 x 16 x 5" Orton AF3P .74 15 120 1800 1700°F 65 lb.

E JK TPF16 ProFusion 16

All Fiber/Clamshell

16 x 16 x 5" TAP Touchscreen .74 15 120 1800 1700°F 65 lb.

F JK BGLO Bonnie Glo All Fiber 15 dia. x 6" Orton AF3P .61 15 120 1800 1700°F 45 lb.

Great dual function kiln for lampworking and fusing. The PAR F14D top-fire, top-load kiln includes an 11" wide x 2.5" tall bead door. Built in table-top stand. UPS-able.

Paragon Fusion 14D

A


The ProFusion 16 clamshell kiln is designed for table top use with 2" tall feet. It is able to full fuse in approx. 1.5 hrs. for smaller items. UPS-able.

Jen-Ken ProFusion 16

E

The Bonnie Glo is a light-weight, fast-firing, all-fiber kiln. The kiln has no shelf, but you can use fiber paper or kaiser lee board. The Bonnie Glo includes a 4" tall metal stand, designed for table top use. UPS-able.

Jen-Ken Bonnie Glo

F

Multiple Options

See Chart

Multiple Options

See Chart

Tabletop Kilns


KILN

& K

ILN

ACC

ESSO


KILN

S

4 www.dlartglass.com

KILN

S

120 Volt — Square Kilns

The Studio Pro 15 was designed with structural firebrick and high efficiency superwool fiber. It features surface mounted heating elements for maximum heat transfer, superwool fiber lid for efficiency and increased firing speed potential. Ships by truck only.

Evenheat Studio Pro 15

Studio Pro 17 is the largest 120V glass firing kiln in the industry. The kiln has surface mounted heating elements for maximum heat transfer, superwool fiber lid for efficiency and increased firing speed potential. Reaches full fuse in approx. 1 hr. Ships by truck only.


The Evenheat Studio Pro 14 features full brick construction. Ships by truck only.


At A Glance - 120V Square Kilns




Max. Temp.

Ship Wgt

A EVEN SP14 Studio Pro 14 Full Brick 14.5 x 14.5 x 6.5" Set-Pro 3-Key .80 15 120 1800 1650°F 130 lb.

B EVEN SP15SP Studio Pro 15 Firebrick & Superwool Fiber

14.5 x 14.5 x 6.5" Set-Pro 3-Key .80 15 120 1800 1650°F 120 lb.

C EVEN SP17SP Studio Pro 17 Firebrick & Superwool Fiber

17 x 17 x 6.5" Set-Pro 3-Key 1.1 18 120 2160 1650°F 130 lb.

C EVEN SP17RM Studio Pro 17 Firebrick & Superwool Fiber

17 x 17 x 6.5" RampMaster 3 1.1 18 120 2160 1650°F 130 lb.

C EVEN TSP17 Studio Pro 17 Firebrick & Superwool Fiber

17 x 17 x 6.5" TAP Touchscreen 1.1 18 120 2160 1650°F 130 lb.

A B C (EVEN SP17SP Shown)

The Evenheat Studio Pro Series (14, 15, & 17) features Dual Access Design, combining front and top loading features into one – providing easy access for glass composition directly into the kiln or in-process manipulations such as raking or roll-ups. A built-in bench top stand and 16" tall floor stand is included.


Multiple Options

See Chart

Evenheat models are available with Set Pro, RampMaster 3, and Tap controllers. Also available is the Evenheat's Quiet Drive Solid State Relay. Call for more information.

Quiet Drive Solid State Relay SystemEvenheat's Quiet Drive Solid State Relay System does away with tradition-al mechanical relays and uses solid state relays in-stead. Solid state means

there are no moving parts. Solid state also means superior heating element operation resulting in tighter temperature control, longer element life and enhanced performance.


TAP Controller Conversion KitConvert your Evenheat RampMaster II or RM3 con-trolled kiln or oven to the TAP touchscreen control. This conversion kit is for Swing-View equipped

Evenheat models (Swing View Style). This conversion kit is for Evenheat kiln models only.

Item # EVEN TC1 Item # EVEN TC2

TAP Touchscreen Stand-Alone ControllerTable Top Controls are used to automate an ex-isting, manually controlled kiln. TAP conversion kits and wall-mount control-

lers are also available by special order. TAP Touchscreen Table Top Controller, 120V, 15A, NEMA 5-15 plug/receptacle configuration.

120 Volt - Square Kilns


KILNS


The Paragon Clamshell 14D dual opening kiln can be opened by lifting the kiln body or the kiln lid, but never both at the same time due to safety latches. Ships by truck only.

The Paragon Clamshell 16 Standard kiln is 20% larger than the CS14D, Single opening is easy to load, because the top lifts out of the way with counter weight springs. Ships by truck only.

Paragon CS16SParagon CS14D

A B

The Paragon clamshell kilns heat from the top insulating firebrick for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves which helps eliminate dust. The kiln is easy to open with counter-weight springs mounted under the kiln. The kiln base extends 4" beyond the back to support the weight of the kiln when in the open position.

FiberFuse-16 ceramic fiber kiln features: sidewall heating elements; 2" thick light-weight ceramic fiber lid, walls, and bottom; a slotted control panel for air circulation; fast-response, exposed-tip, .25" wide, Type K thermocouple; sloped switch box for easy operation of the digital controller and more. UPS-able.

Paragon FiberFuse-16

D

Top-loading kiln with lid elements mounted in pinless element grooves. 16.5" Metal stand included. Ships by truck only.

Paragon Fusion 16

Designed for fusing glass tiles. Square chamber holds a full sq. ft. of 4 x 4" tiles.Ships by truck only.

Skutt FireBox 14

C

E

120 Volt - Square/Clamshell Kilns




Max. Temp.

Ship Wgt

A PAR CS14D CS14D Dual Opening 14 x 14 x 6.5" Sentry 3-Key .73 15 120 1800 1700°F 184 lb.

B PAR CS16S CS16S Clamshell 16 x 16 x 6.5" Sentry 3-Key .96 20 120 2400 1700°F 190 lb..

C SKUTT FB14 FireBox 14 Square Top Load

14.5 x 14.5 x 6.5" GlassMaster LT 3-Button

.8 15 115 1725 1700°F 110 lb.

D PAR FIF16 FiberFuse-16 Top Load 16 x 16 x 5" Sentry 3-Key .88 15 120 1800 1700°F 100 lb.

E PAR F16 Fusion 16 w/o Bead Door 16 x 16 x 6.75" Sentry 3-Key .96 20 120 2400 1700°F 196 lb.

E PAR F16D Fusion 16 w/Bead Door 16 x 16 x 6.75" Sentry 3-Key .96 20 120 2400 1700°F 196 lb.

F CK GK1A GK1A Drop/Rake Kiln 8 x 8 x 6.75" Bartlett Model 3K .25 15 120 172 2000°F 75 lb.

At A Glance - 120V Square/Clamshell Kilns


Multiple Options

See Chart

F

Cress CK GK Drop/Rake Series

Compact and a multi-tasking powerhouse. Cre-ate jewelry or slump smaller pieces. Experiment with raking and vitrograph to use in larger piec-es, or work with enameling and raku. Also great for raking and other hot manipulations. Features a drop-bottom design and 2.5" brick thickness. Dropship only.

120 Volt - Square Kilns


KILN

& K

ILN

ACC

ESSO


KILN

S


ChamberDim.



Max. Temp.

Ship Wgt

A CK GK2 GK2 Drop/Rake Kiln 12 x 12 x 9" Bartlett Model 3K .75 18 240 4320 2000°F 180 lb.

B CK GK3 GK3 Drop/Rake Kiln 17 x 17 x 9" Bartlett Model 3K 1.5 24 240 5760 2000°F 225 lb.

C PAR CS19D CS19D Dual Opening 19 x 19 x 6.5" Sentry 3-Key 1.35 16 240 3840 1700°F 215 lb.

D PAR PEARL18 Pearl 18 Clamshell 18 x 18 x 8.5" Sentry 3-Key 1.5 17 240 4000 1700°F 255 lb.

D PAR PL18F Pearl 18 Clamshell/Ball Grooved Top

18 x 18 x 8.5" Sentry 3-Key 1.5 17 240 4000 1700°F 255 lb.

E JK TPF26 Profusion 26 Clamshell 26 x 26 x 12" TAP Touchscreen 4.69 36 240 8640 1700°F 360 lb.

A

ProFusion 26 features include an integrated stand with casters, a spring assisted lid, quartz encased elements and a 25 x 25 x 1" ceramic shelf. Fiber shelf is also available. The top is 2300° rigid fiber. Dropship only.

Jen-Ken ProFusion 26

240 Volt — Square Kilns

Cress CK GK Drop/Rake Series

E



B

Create jewelry or slump smaller pieces. Experiment with raking and vitrigraph to use in larger piec-es or work with enameling and raku. Also great for raking and other hot manipulations. Features a drop-bottom design and 2.5" brick thickness. Dropship only.

Paragon's square CS-19D digital glass clamshell kiln is dual opening. The elements are com-pletely embedded in a deluxe, lightweight ce-ramic fiber lid with no grooves and no element pins. The dual opening kiln can be opened by lifting the kiln body or the kiln lid, but never both at the same time due to safety latches. Ships by truck only.

Paragon CS19D

C

Paragon's Pearl kiln elements are mounted in the top with pinless element grooves. Electrical components are mounted inside the base of the kilns. Includes .25" heavy duty Type-K thermocouple and built in stand. Ships by truck only.

Paragon Pearl 18

D

Multiple Options

See Chart

240 Volt - Kilns


KILNS


Evenheat Studio Pro 28 Series

B

ID Item # KilnDescrip-

tionChamber Dim.



Max. Temp.

Ship Wgt

A EVEN SP24 Studio Pro 24 Dual Access 24 x 24 x 13.5" RampMaster 3 Key 4.2 32 240 7680 1800°F 280 lb.

A EVEN TSP24 Studio Pro 24 Dual Access 24 x 24 x 13.5" TAP Touchscreen 4.2 32 240 7680 1800°F 280 lb.

B EVEN SP28 Studio Pro 28 Dual Access 28 x 28 x 13.5" RampMaster RM3 5.8 40 240 9600 1800°F 300 lb.

B EVEN SP28Q Studio Pro 28 Dual Access 28 x 28 x 13.5" RampMaster RM3 + Quiet Drive

5.8 40 240 9600 1800°F 300 lb.

B EVEN TSP28 Studio Pro 28 Dual Access 28 x 28 x 13.5" TAP Touchscreen 5.8 40 240 9600 1800°F 300 lb.

B EVEN TSP28Q Studio Pro 28 Dual Access 28 x 28 x 13.5" TAP Touchscreen + Quiet Drive

5.8 40 240 9600 1800°F 300 lb.

C SKUTT GM22CS GM22CS Clamshell 24.5 x 23.25 x 13.5" GlassMaster 4.35 31 240 7450 1800°F 257 lb.

D PAR CS26 CS-26 Clamshell 26 x 26 x 13.25" Sentry-12 Key 5.18 30 240 7200 1700°F 523 lb.

E PAR JANUS24 JANUS24 Front Load 24 x 22.5 x 15" Sentry-12 Key 4.68 45 240 10800 2350°F 425 lb.

F PAR GL24ADTSD GL24ADTSD Front Load 24 x 22.5 x 15" Sentry 12-Key 4.68 45 240 10800 2000°F 365 lb.


A

The Evenheat Studio Pro Series (24 & 28) features a dual access design, combining front and top loading features into one. Additional features include fiber lid construction, swing view adjustable control, spring assist lift, power interrupt switch, and a permanently attached stand (shipped com-pletely assembled). Dropship only.

Multiple Options

See Chart

Multiple Options

See Chart


240 Volt — Square KilnsFor information on controllers see Controllers At A Glance page 13.

Assemble your glass pieces directly on the shelf inside of the PAR CS26, as the top and walls are easy to lift out of the way. Heavy-du-ty air pistons lighten the top and a woven rope seal mounted on all four sides of the lid acts as a gasket and cushions the top. The elements are protected in six quartz tubes for a cleaner kiln interior. Ships by truck only.

Paragon CS-26

D

The GM22CS kiln heating elements are hung on refractory rods, eliminating routing through the lid and the risk of brick dust falling into your glass. The kiln holds a 20" shelf with room for easy placement. Ships by truck only.

Skutt GM22CS

C

The Paragon JANUS24 and GL24ADTSD have heating elements mounted in the top, side walls, and door. The elements in the roof are mounted in a firebrick “ball” groove that eliminates element pins. Features: exposed-tip thermocouple, two peepholes, door safety switch. Ships by truck only.

Paragon JANUS24

E

Paragon GL24ADTSD

F

PAR JANUS24 Sentry controller includes two modes: Ramp-Hold mode & pottery mode, cone 10. Mercury relay optional.

Industrial-grade mercury relays come standard on the GL24ADTSD, which far outlast mechan-ical relays.

240 Volt - Kilns


KILN

& K

ILN

ACC

ESSO


KILN

S

240 Volt Kilns

The Evenheat GT4050 is equipped with the Set-Pro 3-button control and swing view ad-justable control. Includes a 16" tall stand. Ships by truck only.

Evenheat GT4050




Max. Temp.

Ship Wgt

A EVEN GT4050 GT4050 Rectangle 19.75 x 15.75 x 6.5" Set Pro-3 Key 1.17 15 240 3600 1650°F 135 lb.

B EVEN GTS23-13 GTS 23-13 Round 23.5 dia. x 13.5" RampMaster RM3 3.5 30 240 7200 1800°F 175 lb.

B EVEN TGTS23-13 GTS 23-13 Round 23.5 dia. x 13.5" TAP Touchscreen 3.5 30 240 7200 1800°F 175 lb.

C SKUTT GM1014 L GM1014L Round 23.5 dia. x 13.5" GlassMaster 3.5 34 240 8140 1800°F 180 lb.

D SKUTT GM1214L GM1214L Round 28 dia. x 13.5" GlassMaster 5 42 240 10000 1800°F 285 lb.

GTS 23-13 features include: elemented lids and sides (elements independently operated); 16" stand; swing view adjustable control; wide lid handle; full stainless jacket; corner mounting technique; and responsive thermocouples.*Note: Pictured with optional Dyna-Lift lid lifter.Ships by truck only.See Dyna Lift, kiln furniture on page 16.

Evenheat GTS23-13

BA

Skutt GM1014 L

The GM 1014 L & GM 1214L feature top and side firing elements for uniform temperature, lid lifter for easy and smooth access, 8" stand and porcelain peep plugs. Ships by truck only.

Skutt GM1214L

DC

At A Glance - 240V Kilns

Multiple Options

See Chart


240 Volt - Kilns


KILNS


9800.525.0940 • 303.449.8737

KILNS240 Volt - Large Kilns


EVEN GTS41 Features: Access Port (Pat. Pend) simple, no panel-off relay replacement; uninterrupted firing surface (seamless, full shelf, 884 sq. in.); fiber lid construction; swing view adjustable control; easy-to-use handles; power interrupt switch; top and side fire configuration. Dropship only.

Evenheat GTS41 Series

A




Max. Temp.

Ship Wgt

A EVEN GTS41 GTS41 Top Load 40.5 x 25.25 x 13.5" RampMaster RM3 7.52 45 240 10800 1800°F 365 lb.

A EVEN GTS41Q GTS41 Top Load 40.5 x 25.25 x 13.5" RampMaster RM3 + Quiet Drive

7.52 45 240 10800 1800°F 365 lb.

A EVEN TGTS41 GTS41 Top Load 40.5 x 25.25 x 13.5" TAP Touchscreen 7.52 45 240 10800 1800°F 365 lb.

A EVEN TGTS41Q GTS41 Top Load 40.5 x 25.25 x 13.5" TAP Touchscreen + Quiet Drive

7.52 45 240 10800 1800°F 365 lb.

B EVEN GTS2541-13 GTS 25-13 Top Load 41 x 25.25 x 13.5" RampMaster RM3 7.2 40 240 9600 1800°F 320 lb.

B EVEN TGTS254113 GTS 25-13 Top Load 41 x 25.25 x 13.5" TAP Touchscreen 7.2 40 240 9600 1800°F 320 lb.

C EVEN SP41 Studio Pro 41 Dual Access 40.5 x 25.25 x 13.5" RampMaster RM3 7.52 45 240 10800 1800°F 365 lb.

C EVEN TSP41 Studio Pro 41 Dual Access 40.5 x 25.25 x 13.5" TAP Touchscreen 7.52 45 240 10800 1800°F 365 lb.

Evenheat's original large, oval shaped kiln. Fea-tures elements in the lid and sides. Additional GTS 2541-13 features include: lift lid lifter; 16" stand; swing view adjustable control; wide lid handle; full stainless jackets; responsive thermocouples; top and side fire configuration. Ships by truck only.

Evenheat GTS2541-13 Series

B

The Studio Pro 41 is the largest dual access design for large scale firing. Features include: large wall-free floor and seamless shelf; swing view pivoting control, laterally positioned lid heating elements, spring assisted lifting; and fiber top. The main chamber and floor are sep-arate components and can pass through a door as narrow as 28". Corelite shelf sold separately. Dropship only.


C

Multiple Options

See Chart

Multiple Options

See Chart

Multiple Options

See Chart

At A Glance - 240V Large Kilns

240 Volt - Kilns

Evenheat models are available with Set Pro, RampMaster 3, and TAP controllers. Also available is the Evenheat's Quiet Drive Solid State Relay. Call for more information.

Quiet Drive Solid State Relay SystemEvenheat's Quiet Drive Solid State Relay System does away with tradi-tional mechanical relays and uses solid state re-lays instead. Solid state

means there are no moving parts. Solid state also means superior heating element operation resulting in tighter tem-perature control, longer element life and enhanced performance.


TAP Controller Conversion KitConvert your Evenheat RampMaster II or RM3 controlled kiln or oven to the TAP touchscreen control. This conversion kit is for Swing-View equipped Evenheat

models (Swing View Style). This conversion kit is for Evenheat kiln models only.

Item # EVEN TC1 Item # EVEN TC2

TAP Touchscreen Stand-Alone ControllerTable Top Controls are used to automate an ex-isting, manually controlled kiln. TAP conversion kits and wall-mount control-

lers are also available by special order. TAP Touchscreen Table Top Controller, 120V, 15A, NEMA 5-15 plug/receptacle configuration.


KILN

& K

ILN

ACC

ESSO


KILN

S

240 Volt - Large Kilns For information on controllers see Controllers At A Glance page 13.

JK TPF52 Fiber kiln is equipped with an inte-grated stand with casters, two 24" clay shelves, and a solid 51" fiber shelf. The stand puts the floor at about 34" high. The lid is spring-as-sisted. The floor is made of individual kiln bricks that are not cemented together, for easy replacement. The controller is separate from the kiln and wall mountable. Dropship only.

Jen-Ken JK TPF52 — ProFusion 52

ID Item # Kiln Descrip.Chamber Dim.



Max. Temp.

Ship Wgt

A JK TPF52 ProFusion 52 Fiber 52 x 26 x 14" TAP Touchscreen 10.17 45 250 10800 1700°F 850 lb.

B SKUTT GM1414 VL GM1414 Oval 41.5 x 24.5 x 13.5" GlassMaster 6.7 34.7 240 8320 1800°F 355 lb.

B SKUTT TGM1414VL GM1414 Oval 41.5 x 24.5 x 13.5" GlassMaster TouchScreen

6.7 34.7 240 8320 1800°F 355 lb.

A

The oval-shaped GM1414 comes equipped with top and side firing elements which fire evenly. Features include: 8" stand, 2" round viewing windows and lid lifter feature. Ships by truck only.See kiln furniture on page 16.

Skutt GM1414

B



Item # SKUTT PHP

Peep Hole Plug Fits all Models

240 Volt - Kilns

Skutt GlassMaster Touchscreen

Skutt Touchscreen retrofit upgrade kit easily converts any existing 24 key Skutt GlassMaster controller to

touchscreen technology. Preset programs: GlassFire mode. GlassFire Mode allows you to run a program simply by entering the type of effect you want: Fuse, Tack Fuse or Slump and a speed based on the size and thickness of the project.

Item # SKUTT TGM

Multiple Options

See Chart


KILNS


240 Volt Kilns

The CS60 clamshell's interior is large enough to fire table tops, window and door lights, or a load of platters and bowls all at once. Mounted on a tubular steel stand and equipped with gas springs to facilitate opening the lid. Dropship only.

Denver KLCS60

C

The DGM KLCSC clamshell casting kiln is designed with both a top load and clamshell lid. Dropship only.

Denver KLCSC

The DGM KLTFC kiln is a top and front opening casting kiln with heavy duty hinges and door latch. Dropship only.

Denver KLTFC

The KL50 features a spring-assisted gas coun-terweight lid opening system and is mounted on a welded tubular steel stand with leveling feet. Metal and fiber construction means rapid heating and cooling for maximizing production times. Also available in 9" and 18" deep models. Dropship only.

Denver KL50D


ChamberDim.



Max. Temp.

Ship Wgt

A DGM KL27D* K-27L Top Load 21 x 21 x 12" Bartlett RTC-1000 3 28 240 6160 1700°F 300 lb.

B DGM KLCS60* KL-CS60 Clamshell 60 x 30 x 12" Bartlett RTC-1000 12.5 56 240 12320 1700°F 900 lb.

C DGM KLCS60RT* KL-CS60 Clamshell/Roll Table

60 x 30 x 12" Bartlett RTC-1000 12.5 56 240 12320 1700°F 900 lb.

D DGM KLCSC* KL-CSC Clamshell 42 x 28 x 18" Bartlett RTC-1000 12.25 56 240 12320 1700°F 780 lb.

E DGM KLTFC* KL-TFC Top & Front Opening

24 x 24 x 18" Bartlett RTC-1000 6 28 240 6160 1700°F 500 lb.

F DGM KL50D* DGMKL Top Load 42 x 28 x 12" Bartlett RTC-1000 8.75 42 240 9240 1700°F 500 lb.*Power cord plugs are not included in the kiln price as they are often hard-wired. Kilns come with a 4 wire 6 ft power cord.

F

B

D E


The DGM KLCSC and DGM KLTFC are equipped with top and side elements, gas spring assist, and automatic venting system. The kilns come mounted on a welded steel stand with adjustable level-ing feet and a fully programmable digital set point control. Dropship only.

At A Glance - 220V Kilns

Denver KL27D

A

All metal and fiber construction; capable of multiple firings per day. The KL27 is a great choice for the small studio. Uses a 20 x 20" kiln shelf. Includes a welded steel stand with adjustable leveling. Dropship only.

The DGM KLCS60RT is the same kiln as the KL-CS60 except for the added convenience of a roll out table. It has easy guide tracks that will position the table into docking so that the lid fits perfectly into place every time. Dropship only.

240 Volt - Kilns


KILN

& K

ILN

ACC

ESSO


KILN

S

240 Volt - Large Kilns For information on controllers see Controllers At A Glance page 13.

The PAR PAF20-1 kiln heats from the four sides. Dropped, recessed brick grooves protect the elements. The kiln is heavily insulated for economical operation. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. Fea-tures include: spring-loaded quick-release door latches; solid state Sentry Xpress controller; and a mercury relay. Dropship only.

Paragon PAF20-1 Annealer

E

The PAR PAT20-1 kiln heats from four sides. Dropped, recessed brick grooves protect the elements for long life. The insulating firebricks and fiberboard, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. Additional features include: 4" ceramic fiber-board thick top; 4.5" thick walls (2" ceramic fiberboard and 2.5" firebricks); 3" thick firebrick bottom; two LiteLid assemblies; 16" front handle; safety switch; and a mercury relay. Dropship only.

Paragon PAT20-1 Annealer




Max. Temp.

Ship Wgt

A PAR GL44ADTSD GL-44 Top Load 21 x 43 x 16" Sentry 12-Key 8.36 48 240 11500 1700°F 854 lb.

B PAR GL64ADTSD GL-64AD Top Load 22 x 64 x 16" Sentry 12-Key 13 69 240 16500 1700°F 1150 lb.

C PAR PEARL4426 PEARL4426 Clamshell 26 x 44 x 13" Sentry 12-Key 8.6 48 240 11500 1700°F 1063 lb.

D PAR PAT20-1 PAT20-1 Top Load 26.5 x 44.5 x 25" Sentry 3-Key 17.26 48 240 11500 1100°F 911 lb.

E PAR PAF20-1 PAF20-1 Front Load 53.5 x 29 x 27" Sentry 3-Key 24.24 68 240 16300 1100°F 1011 lb.


D

The GL-44AD brick bottom holds two 20" square shelves and has four peepholes along the front.

Paragon GL44ADTSD

The GL-64AD brick bottom holds three 20" square shelves and has eight peepholes along the front.

Paragon GL64ADTSD

B

The GL-44AD and GL-64AD Professional Series glass kiln is optimized for serious glass production. The 16" depth is ideal for glass sagging. The sidewall heating elements are mounted in all four sides. The kiln uses advanced power ratio technology that balances the heat between the top and side elements. The massive lid is easy to lift with Paragon's patented LiteLid spring counter-balance. The GL-44AD and GL-64AD comes with three LiteLid assemblies. The lid is insulated with 1" ceramic fiber and 3" ceramic fiberboard. Replaceable heating elements mount in lid fiberboard grooves. 2.5" insulating firebrick lines the walls and bottom. Dropship only.

A

The Pearl 4426 clamshell kiln features 3" firebrick sidewalls, bottom & top. Electrical components are mounted inside a ventilated switch box with a double heat shield to keep cool. Elements are also protected in quartz tubes for a cleaner kiln interior. The Pearl-4426 features include: two rows of sidewall elements for even heat distribution; a 42 x 24” CoreLite shelf; industrial-grade mercury relays; .25” wide Type-K, special limit wire, thermocouple with exposed tip. Dropship only.

Paragon Pearl 4426

C

240 Volt - Kilns


KILNS


Controllers at a Glance

Evenheat Set-Pro – 3 Key DigitalMemory: Four programs with up to 8 segments per program.On-the-fly, during firing, features allow you to add time, change temperature or skip ahead.Preset programs: Express ModeSimply key in your glass COE (90, 96 or 82), firing style and firing speed to create the firing program; preset programs can also be customized.

Paragon Sentry Xpress – 3 KeyMemory: Four programs, with up to 8 seg-ments per program.On-the-fly, during firing, features allow you to add time, change temperature or skip ahead. Basic mechanical diagnostic error messages are also available.No preset programs.

At A Glance - Controllers

Jen-Ken Orton AF3P Auto-Fire 3 Button Programmable Controller. The AF3P can store up to 6 eight-step user programs.Jen-Ken kilns exclusive pre-programmed Orton digital controller. This controller has over 20 different firing schedules as well as many blank slots for those users that want to design their own firing schedules. All programs are easily editable so you can fine-tune your controller's results.

Evenheat Rampmaster RM3 Controller – 12 Key ControllerMemory: 12 programs with up to 32 segments per program.On-the-fly, during firing, features such as add-ing time to holds and skipping ahead to anneal are available, as well as an alarm function to alert when the kiln moves to anneal.Preset Programs: Express ModeSimply key in your glass COE (90, 96 or 82), firing style and firing speed to create the firing program, preset programs can also be customized.

Paragon Sentinel Sentry — 12 KeyMemory: Nine programs, 8 with up to 10 seg-ments per program and one with 18 segments.On the fly, during firing, features allow you to add time, or temperature or skip ahead. Cost calculator: enter electricity cost and kiln amperage for a per-firing cost detail.No preset programs.

Bartlett Genesis RTC-1000 The Bartlett RTC-1000 digital set point controller stores up to 6 programs with 32 segments per program.

Bartlett Model 3K This model is equipped with an electronic 3 key controller LED readout display. The soft-ware of this controller has four user programs. Each program can have up to eight segments, with each segment consisting of a ramp rate (in degrees per hour), a target temperature, and a hold time.

GlassMaster Controller - 24 KeyMemory: Twelve programs with up to 8 seg-ments per program (two programs may also be linked for one 16 segment program).On-the-fly, during firing, features allow you to add time, or temperature or skip ahead. Maxi-mum temperature setting prevents user-error over-fires. Current sensors allow for advanced diagnostics.Preset programs: Glass Fire ModeEnter the process (slump, tack-fuse, etc.), and thickness and size of the glass to run pre-set firing programs. Preset programs may be customized.

GlassMaster LT Controller - 3 KeyMemory: Five programs with up to 8 segments per program.On-the-fly, during firing, feature allow you to add time, or temperature or skip ahead.Preset programs: Glass Fire Mode - Enter the process (slump, tack-fuse, etc.), thickness and size of the glass to run pre-set firing programs. Preset programs may be customized.

Skutt GlassMaster TouchscreenPreset programs: Glass Fire Mode and more – enter the process (slump, tack-fuse, etc.) and thickness and size of the glass to run pre-set firing programs. In addition the touchscreen pro-vides an easy to edit screen, segment and graph displays of the firing, and easy input and storage of your firing programs. Preset programs may be customized. New functions include: guided start, help screens, more detailed diagnostics, graph-ing, and logging. Additional features include a hinged design which allows the controller to be moved up or down to an angle that is comfort-able to program. Upgrade kit available. Call for more information.

TAP w/Touchscreen TechnologyMemory: TAP controller contains a vast amount of memory and there is no practical limit to the number of programs you wish to create and store. There is also no practical limit on the number of available segments or steps used for a firing schedule. On-the-fly features including adjusting set point temps, hold times and skipping ahead. The controller includes kiln error information and diagnostics features as well.The TAP Controller is designed for computer networking. This connectivity will allow for monitoring the kiln.Preset Programs: Pre-loaded firing schedules (glass, ceramic and metal clay firings) that differ depending upon the style of kiln and were de-veloped professionally on Evenheat equipment.

Controllers at a Glance


KILN

& K

ILN

ACC

ESSO


KILN

S

Ceramic kiln shelves are available in a wide array of shapes, sizes, and thicknesses. Appropriate for glass process temperatures and beyond,do not exceed 2340°. Shelves listed as round may be round or octagonal.

Kiln Shelves

Item # Size Description

Half Round

KS 22H 10 x 22" Half Round Kiln Shelf (fits SKUTT GM1414)

KS 26H 13 x 26" Half Round Kiln Shelf (fits SKUTT GM1214)

KS 21H 21" Half Round Kiln Shelf (fits EVEN GTS 23-13, EVEN GTS 2541)

D-Shape

KS 21D 21 x 17.5" D-Shape Kiln Shelf (fits PAR OV4122 and EVEN GTS2541-13 using 2 shelves)

Square

KS 5SQ 5.375 x 5.375" Square Kiln Shelf (fits Hot Box)

KS 7SQ 7 x 7" Square Kiln Shelf (fits PAR CAL, PAR PEARL18, & PAR F240)

KS 725SQ 7.25 x 7.25" Square Kiln Shelf (fits EVEN S8V)

KS 10SQ 10 x 10" Square Kiln Shelf (fits PAR F120)

KS 12SQ 12 x 12" Square Kiln Shelf (fits PAR F14D)

KS 135SQ 13 x 13" Square Kiln Shelf (fits EVEN SP14)

KS 15SQ 15 x 15" Square Kiln Shelf (fits PAR F16)

KS 16SQ 16 x 16" Square Kiln Shelf (fits EVEN SP17)

KS 17SQ 17 x 17" Square Kiln Shelf (fits PAR PEARL18, PAR F240)

KS 20SQ 20 x 20" Square Kiln Shelf (fits SKUTT GM22CS)

KS 24SQ 24 x 24" Square Kiln Shelf (fits EVEN SP28 & PAR CS26)

Rectangle

KS 8X9 8 x 9" Rectangle Kiln Shelf (fits SKUTT GM10F, SKUTT GM10F D)

KS 12X13 12 x 13" Rectangle Kiln Shelf -(fits PAR F14D)

KS 14X17 13.75 x 17" Rectangle Kiln Shelf -(fits EVEN GT4050)

KS 13X14 13 x 14" Rectangle Kiln Shelf (fits SKUTT FB14)

KS 15X21 15 x21" Rectangle Kiln Shelf (fits EVEN GTS 23-13, EVEN GTS 2541)

KS 18X22 18 x 22" Rectangle Kiln Shelf (fits SKUTT GM1414)

Kiln Shelves

Larger kilns require multiple traditional ceramic shelves to fill the kiln. See diagram for examples.


KILNS



Round/Octagon

KS 12R 12" Round Kiln Shelf (fits EVEN GT14-6, FUSION 7)

KS 13R 13" Round Kiln Shelf (fits EVEN HOTSHOT)

KS 15R 15.5" Octagonal Kiln Shelf (fits EVEN GT18-9, FUSION 8)

KS 20R 19.5" Round/10-Sided Kiln Shelf (fits SKUTT GM 1014 L)

KS 21R 21" Round Kiln Shelf (fits EVEN GTS 23-13)

Kiln ShelvesCeramic kiln shelves are available in a wide array of shapes, sizes, and thicknesses. Appropriate for glass process temperatures and beyond, do not exceed 2340°. Shelves listed as round may be round or octagonal.

Kiln Shelves


Rectangle

KS C3924 39.3 x 24 x 1" Corelite Kiln Shelf

Custom

KS C3924 EO 23.25 x 38.5 x 1" Corelite Kiln Shelf (fits EVEN GTS2541-13)

KS CESP41 39 x 22 x 1" Kiln Cut Corelite Kiln Shelf - (fits EVEN SP41)

KS C3924 SO 22.62 x 39 x 1" Corelite Kiln Shelf (fits SKUTT GM1414 Oval Kiln)

Corelite hollow-core construction kiln shelf, an excellent shelf choice for larger glass projects, but it does require specific heating and cooling schedules. Check online or call for manufacturer’s guidelines of use prior to purchase. Energy efficient, and heats evenly. Amazingly strong, yet lightweight with superior heat circulation and sag resistance; the I-beam hollow-core construction prevents warping. Also available precut to fit Skutt GM1414 VL and Evenheat GTS2541-13 kilns.

Corelite Shelves

This woven ceramic fiber board is an excellent alternative to ceramic kiln shelves. Since Duraboard will not retain heat as long as ceramic kiln

Duraboard

Item # Size

FUS DB12 .5 x 42 x 48"

FUS DB12 1/2 .5 x 42 x 24"

shelves will, firing schedules may be slightly shortened. This material cuts easily with a utility knife and can be used for multiple firings as a kiln shelf, drop-out ring or dam material for your kilnformed glass. The binders in this material must be burned out initially. Additional rigidiz-ing is suggested, treatment options depend on your project. Ships by truck only.

Ceramic Shelf Coating

Turn Duraboard Fiber Shelf into a smooth & durable fusing surface. Ceramic coating provides a hard, rigid, smooth surface on un-treated or previously

Item # Size

FUS CSC 1 qt.

hardened refractory fiber boards. This product has a continuous service rating of 2300°F and is thermally reflective, with added dielectric strength. Easy application with a roller or wide brush.


Fiber Mold Hardener – 1 Qt.

Fiber Mold Hardener is used with fiber paper or blanket to create unique slumping molds. Also used with duraboard to

create a stronger firing surface. Fiber Mold Hardener will gain surface strength after firing to 1300°F. Easy to apply and sand to a smooth finish.

Item # FUS MHQ


KILN

& K

ILN

ACC

ESSO


KILN

S

Kiln FurniturePosts

Ceramic posts support kiln shelves and molds. Posts are 1" wide and come in multiple lengths.

Item # Size

KP 00 .5 x 1"

KP 01 1 x 1"

KP 02 2 x 1"

KP 03 3 x 1"

Item # Size

KP 04 4 x 1"

KP 05 5 x 1"

KP 06 6 x 1"

Caldera Kiln Furniture KitKit includes shelf, posts, and glass separator. See Caldera kiln on page 3.

Item # PAR CAL FK

Dams – Mullite / Cordierite

Bullseye dams feature crisp edges for excellent contact with the kiln shelf. Ten inch dams are appropriate for creating

Item # Size

BE 8882 10 x 1.5 x .625"

BE 8893 20 x 1.5 x .625"

Hot Brick – Mullite / Cordierite

work up to 9 x 9" (229 x 229 mm). Twenty inch dams are used for work up to 19 x 19" (483 x 483 mm). Dams are exceptionally straight and true.

Bullseye brick clay bracers (or brix) feature crisp edges for excellent contact with the kiln shelf.

Item # Size

BE 8896 9 x 2.25 x 2.5"

BE 8897 4.5 x 2.25 x 2.5"

BE 8898 4.5 x 1.125 x 2.5"

Use Bricks to contain thicker fused slabs. Toler-ance on bricks dimensions is 1/8 in (3.18 mm).

Dyna Lift for EVEN GTS23-13The Dyna-Lift makes opening a large lid easy. Smooth operation; a single point of attach-ment allows the lid to flex and expand with higher temperatures.See EVEN GTS23-13 kiln on page 8.

Item # EVEN DL2313

Kiln PartsDigital Deluxe Pyrometer C/F

The Deluxe Digital Pyrometer gives precise kiln temperature readings and includes thermocouple. Shows

Fahrenheit and Celsius. Battery included.

Item # FUS DDFC

Digital Pyrometer

Item # PAR DP

Element Pins

Sold in packs of 24.

Item # KA MS20

Deluxe Stand for GM1414 KilnThis adjustable rolling stand is constructed of heavy duty, welded square tubing and fitted with high quality

polyurethane wheels. Wheels will not develop flat spots if they sit too long in one spot unlike rubber or plastic wheels. Adjustable to 11, 16, & 21". See SKUTT GM1414 kiln on page 10.

Item # SKUTT GM1414DS

Kiln Furniture

Kiln Liquid Lid Coat

Liquid kiln coating is used to re-coat the inner lid surface of firebrick kilns. It is a mixture of kiln cement, fine brick dust, a gumming agent, and water. Avoid contact with elements.

Item # Size

PAR KLC 16 oz.

Kiln Coatings and RepairKiln Repair Cement Powder

Patch damaged fire-brick with kiln repair cement powder.

Item # Size

PAR KRP 1 lb.

Pyrolite Adhesive – 10 oz.

Use Pyrolite to glue loose element pins in place or secure drooping elements. Pyrolite, a refractory joint and patch compound, comes in a

10.3-ounce plastic tube that fits into a common caulk gun applicator. Note: Use sparingly and only as a last resort to secure brick, elements or pins in place. Pyrolite will adhere to brick and may complicate future element replacement or other maintenance.

Item # KA PYRA



KILN W

ORKIN

G SUPPLIES

Shelf Paper

Papyros Shelf Paper

Item # Type Size

SP PY2082 Craft Roll 20.5" x 82' (140 sq. ft.)

SP PY41250 Bulk Roll 41" x 250' (854 sq. ft.)

SP PY4133 Studio Roll 41" x 33' (112.75 sq. ft.)

SP PYS20 Sheet 20.5 x 20.5" - Sold individually

SP PYSBX Studio Pack 20.5 x 20.5" - 100 sheets /pk.

PAPYROS is a ceramic-based paper designed for glass fusing. When placed between the kiln shelf and the under-side of your glass fusing project, Papy-ros prevents the glass from sticking to the kiln shelf. Ideal for the majority of fusing projects up to 1600°F.

Fiber Shelf Paper

Fiber paper is a light-weight, flexible material used to keep glass from adhering to kiln shelves, metal forms or other layers of glass while firing. This high quality,

Item # Type Thickness Size

FUS RC 18FP Roll 1/8" 24" x 50' (100 sq. ft.)

FUS ROLL 18FP Roll 1/8" 24" x 125' (250 sq. ft.)

FUS ROLL 132FP Roll 1/32" 24" x 160' (320 sq. ft.)

FUS 116FP Sheet 1/16" 24 x 24"

FUS 18FP Sheet 1/8" 24 x 24"

FUS 132FP Sheet 1/32" 24 x 24"

Bullseye ThinFire Shelf PaperThinFire Shelf Paper from Bullseye will create a smooth surface for your kiln-fired pieces. This heat-resistant, light-weight ceramic impreg-nated paper provides an excellent separation between the kiln shelf and glass in your kiln. Good for one use, Thin-Fire can withstand heat up to 1600°F.

Item # Type Size

BE 8210 Sheet 20.5" sq.

BE 8211 Roll 41" x 250'

BE 8710 Roll 20.5" x 65'

BE 8711 Roll 41" x 32.75'

fiber paper gives a nice, subtle texture when used as a shelf separator. Great for damming, cut-out relief and molds. Can withstand multiple firings.

Primers & Primer Cleaner

Bullseye Shelf Primer

Bullseye Shelf Primer successfully prevents glass from sticking to kiln shelves and molds. Comes in powder form. Just mix with water. Apply with hake brush or sprayer. One 5-lb. container covers approx. 350 sq. ft.

Item # Size

BE 8220 5 lb.

Hi-Fire Shelf Primer

Hi-Fire Shelf Primer will withstand high kiln temperatures because of its special formulation of alumina and low-fluxing clays. Works great for high fire projects such as raking or casting. It will leave the back of your project smooth and also works well for coating bead mandrels.

Item # Size

FUS PRIMER 24 oz.

Primers & Shelf Paper


Flat, wide brush ideal for applying media over large areas; use for kiln-wash, paints or enamels.

Item # FUS HB

Hake Brush

Artist Evelyn Gottschall Baker


KILN

WO

RKIN

G SU

PPLI

ESD&L is committed to providing the newest products in a growing industry.

Fiber Blanket - .5 in.Fiber blanket has multi-ple uses including mold making, bent panel and lamp repair. It is com-monly used by bead-makers as an annealing blanket and is used in

Item # Type Size

FUS 12FB Sheet 24 x 24"

FUS ROLL 12FB Roll 24" x 25' (50 sq. ft.)

Twisted Fiber Rope – 8 Ft.Fuse fiber rope between layers of glass to create channels. Rope strands can be unbraided for smaller channels or holes. Rope is composed of 3 braided strands, approx. .25" dia. ea.

Fiber Products

Fiber Mold Hardener – 1 Qt.

Fiber Mold Hardener is used with fiber paper or blanket to create unique slumping molds. Also used with duraboard to create a stronger firing surface.

ZYP Boron Nitride Mold Release is an indus-trial strength spray release for ceramic and stainless steel molds. It is easy to use, covers completely, and

ZYP Boron Nitride - Aerosol Spray

Item # Size

ZYP BN13 13 oz.

Item # Size

ZYP BNSB 12 oz.

Boron Nitride Glass Ready-to-Use Trigger Sprayer, Water-based, non-flammable, non-hazardous, an-ti-stick/easy release spray provides a wa-

ZYP Boron Nitride - Non-Aerosol

Item # Type Size

ZYP BNB8 Brushable 8 oz.

ZYP BNBQ Brushable 1 qt.

ZYP BNT8 Thinner 8 oz.

ZYP BNTQ Thinner 1 qt.

Boron Nitride Glass Release is ready-to-use, brushable, water-based, non-flammable, non-hazardous.Brushable Boron Nitride Glass Release

ZYP Boron Nitride - BrushableRelease Sprays

produces castings with beautiful, spur free sur-faces and edges. ZYP is the only Boron Nitride aerosol rated for higher fusing temperatures(up to 1800°F); it is best suited for shallow castings and slumping.

ter-based Boron Nitride paint as an alternative to the solvent-based aerosol. Just like the ZYP aerosol, this new easy-to-use trigger sprayer allows application of Boron Nitride to most any non-glazed surface, substrate or mold.

is an easily applied boron nitride coating that is designed for ceramic molds used for glass slumping. Thin as needed with ZYP Thinner.

kilnformed applications as a glass separator.

Fiber Mold Hardener will gain surface strength after firing to 1300°F. Easy to apply and sand to a smooth finish.

Item # Size

FUS KL1 24 x 36 x 1 in.

FUS KL12SQ 12 x 12 x 1 in.

Kaiser Lee Board – a perfect casting medium. It is easy to cut, carve, and shape. The board can be used coutless times. There is no waste for scraps pieces can even be used. Kaiser Lee Board does not absorb heat like other mold material and does not interfere with the cooling process, ensureing even heat distribution and less stress on the glass. The board does not need mold hardener and even comes pre-fired -

Kaiser-Lee Board

MO-RE Boron Nitride - SprayNon-flammable release for fusing glass enthusi-asts and professionals. MO-RE can withstand firing schedules from 500°F/260°C to 1600°F (872°C).

Item # Size

MO BN8 8 oz.

MO BN12 12 oz.

Slide-Boron N Spray for SS – 10 oz.A release coating for stain-less steel molds. Spray, fire dry & slump. Coating hold for several slumpings. Not recommended for high fusing temperatures, slump temperatures only.

Slide mold release is an economy boron nitrite spray. Not for ceramic glass molds.

eliminating organic binders. Priming is recommended to protect board surface when using high temperature firings. No special tools needed, you can use a spatula, kitchen knife, sand paper or sanding block, nail file, etc.

Fiber Products & Release Sprays

Item # FUS R814

Item # FUS MHQ

Item # Size

FUS KL12SQ 15 12 x 12 x 1.5 in.

FUS KL12SQ 2 12 x 12 x 2 in


Primo PrimerPrimo Primer will allow you to fire to 1550° and higher. Glass will not stick to the shelf, and the primer will not stick to the glass. It is perfect for coating intricate molds because it will not obscure the fine line details. Recom-mended for use with intricate casting molds.

Item # Size

FUS PRM15 1.5 lb.

FUS PRIMO 5 lb.Item # FUS BNS



KILN W

ORKIN

G SUPPLIES

Holding Agents, Glazes & Glue

GlasTac Gel - BullseyeGlasTac Gel is a thicker version of the regular GlasTac. GlasTac Gel has a “tackier" feel but still burns out cleanly. Holds its applied shape well (you can also apply it with a paintbrush),

Item # Type Size

BE 8268 Application Bottle 4 oz.

BE 8269 Refill Bottle 32 oz.

Holding AgentsGlasTac - Bullseye

Lightly tacks glass pieces in place prior to firing. Slow drying pli-ability allows readjust-ments as you work.

Item # Type Size

BE 8234 Application Bottle 4 oz.

BE 8232 Refill Bottle 32 oz.

Fusing Solution Gel - TubeA clean burning glue that prevents devit-rification! Bonds frit, powders, enamels and paints before fusing and prevents devitrification during firing. Fusing

Item # Size

FUS FS8 8 oz.

Klyr-FireA water-based holding agent. Use with frit, powders and enamels.

Item # Size

THO A1 1 pt. (16 oz.)

Holding Agent – A3

Similar to Klyr-Fire, but slightly more viscous.

Item # Size

THO A3 1 pt. (16 oz.)

Solution is a mixture of organic gums with an overglaze base. It is thicker and has more holding power than most popular binders. May be brushed on, thinned with water and sprayed, or drawn on with the built-in applica-tor tip. Use as a glue or as a devit-arresting overglaze. Non-toxic, food-safe.

makes calligraphic powder lines easy, stays sticky longer, tacks sheet to sheet with great holding power so you can move projects sooner. Great for children’s projects.

BE 8232 & BE 8234 Shown

BE 8269 & BE 8268 Shown

Super Spray Overglaze99.98% lead free - 1350°F. A very low-lead over-glaze that prevents devitrification on kiln fired glass projects - safe for food bearing surfaces. Will not discolor sensitive tones. Simply brush or spray on glass project.

Item # Size

FUS 5508 8 oz.

FUS 5532 32 oz.

Glazes

Clear Coat Overglaze

A natural fluxing agent that produces a durable glossy shine on the surface of fired glass - does not contain any lead or glass powders. Com-pletely safe to use on food bearing surfaces. Brush or spray a light coat onto the top surface of the glass being fused. Working range, 1350–1550°F.

Item # Size

FUS CC8 8 oz.

Bending GlazeDesigned to mature at 1100°F. Can be brushed or sprayed directly onto the surface or ground edges of glass to prevent devitrification during the slumping cycle. Ideal for single layer bending such as bent lamp panels. Bending Glaze is NOT safe for food-bearing surfaces.

Item # Size

FUS BG4 4 oz.Spray A Plus

A clear, low melting glass, ground to micron size & suspended in a medium. For brush or spray applications. May be applied to fusing projects when ready for firing to prevent devitrification, or as an overglaze for dull or matte surfaces, or even previously devitrified surfaces. 100% lead free. Fire to minimum 1300°F (704°C).

Item # Size

FUS SPA8 8 oz.

Wash Away easily removes stubborn, baked-on shelf primer from fused projects. Apply Wash Away and scrub with a non-metallic scouring pad.

Item # Size

FUS WA8 8 oz.

Wash AwayNO Days Liquid Fusing Adhesive is a light tack liquid adhesive designed for temporary setup of light accent weight items such as frit, leafting or foiling

Item # Size

NDG LFA4 4 oz.

when constructing glass fused art. Includes an easy-to-use foam brush applicator so you can easily dispense the amount of adhesive needed. Burns off with no residue.

Liquid Fusing Adhesive - NO Days


KILN

WO

RKIN

G SU

PPLI

ESD&L is committed to providing the newest products in a growing industry.

Water Friendly Medium IIThis unique binder holds the enamels to the glass during the painting stage of the process. It can be mixed to a variety of consistencies to fit painting needs. Ideal for

Item # Size

FUS WFM4 4 oz.

sifting and brush techniques like tracing, stip-pling, flood coating, and color wash. Just add water and a couple drops of this concentrate to the powders to give the enamels a smooth, creamy consistency. Burns away cleanly.

Mediums

Create lines, texture and 3-D elements with glass. Mix Vitrigel with powdered glass frit. Use in squeeze bottles or pastry applicators to create lines, or tool

Item # Size

SGL VTG1 16 oz.

it to do custom textures, shapes and sculptural elements. Fire on their own or add them to other kiln formed work. 1 lb. makes 20+ quarts.

Virigel – Glass Medium

Water miscible. Excel-lent choice for painting. Pigments disperse easily, requiring less mixing. Water cleanup afterwards.Works with COE 82, 90, 96 and 104.

Painting & Screen Medium

Item # THO A14

Mix this powder with water to get the proper consistency, and then add your chosen powder frit. Using this mixture, you can produce dimensional embel-

CMC Powder

Item # Size

FUS CMC16 1 lb.

lishments to add to your fused art glass pieces. This multifunctional tool can also add flow and adhesion to enamels used in your work.

A special oil blend which fires ash free. Use with dry painting enamels or ceramic pigments. Also used for glass silk-screen processes.

Squeegee Oil

Item # Size

THO A4 2 oz.

Clove oil makes an excellent mixing agent/medium for paint powders. Recommend-ed for use with Reusche Paints.

Clove Oil

Item # Size

FUS CO1 1 oz.

A traditional mixing agent and binder for glass paints. Recommended for use with Reusche Paints.

Gum Arabic

Item # Size

FUS GA1 1 oz.

Mediums

A unique gel that can be mixed with powdered frits or enamels so they can be applied with a squeeze bottle. When mixed to the proper consistency,

Liquid Stringer Medium

Item # Size

FUS LSM8 8 oz.

drawn lines will maintain the round dimensional quality of a glass stringer. This medium burns out clean when fired.

We have more paint mediums!Check out pages 22, 23 & 30.

A brushwork-oriented thinning oil that dis-perses a high percent-age of powder. Paints very well and has the drying characteristics many artists like.

Thinning Oil #5

Item # Size

THO A5 2 oz.

Frit Mediums



PAINTS & EN

AMELS

Color Line - BullseyeAll colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Color Line Pens are ready-to-use enamels for glass in a fantastic range of intense colors. Choose from more than 40 colored pens (squeeze bottles) for use with glass in a firing range from 1300–1510°F (700–820°C).

All colors have extremely strong pigmentation, are lead-free and freely mixable to obtain further shades. Color Line colors are homogenous and smooth in water based medium, environmentally friendly, and easy to use in exactly the required amount ensuring low waste.

Color Line Enamel Pens

Item # Description

CLP 115 Egyptian Blue (Bullseye 008477)

CLP 116 Deep Sky Blue (Bullseye 008478)

CLP 117 Yellow (Bullseye 008479)

CLP 118 Lemon (Bullseye 008480)

CLP 119 Black (Bullseye 008481)

CLP 120 Brown (Bullseye 008482)

CLP 121 Maroon (Bullseye 008483)

CLP 122 Sienna (Bullseye 008484)

CLP 123 Mustard (Bullseye 008485)

CLP 124 Orange (Bullseye 008486)

CLP 125 Carmine (Bullseye 008487)

CLP 126 Coral (Bullseye 008488)

CLP 127 Lilac (Bullseye 008490)

CLP 128 White (Bullseye 008491)

CLP 211 Gold (Bullseye 008495)

CLP 212 Bronze (Bullseye 008496)

CLP 213 Silver (Bullseye 008497)

CLP 214 Copper (Bullseye 008498)

Item # Description

CLP 005 Peach Cream (Bullseye 008492)

CLP 010 Dark Camouflage (Bullseye 008561)

CLP 011 Red (Bullseye 008493)

CLP 017 Cobalt Blue (Bullseye 008562)

CLP 023 Ice Gray (Bullseye 008563)

CLP 025 Teal Green (Bullseye 008564)

CLP 031 Sea Green (Bullseye 008565)

CLP 034 Midnight Blue (Bullseye 008531)

CLP 048 Dark Lilac (Bullseye 008567)

CLP 055 Tangerine (Bullseye 008568)

CLP 071 Lime Green (Bullseye 008494)

CLP 072 Eggplant (Bullseye 008560)

CLP 073 Hunting Green (Bullseye 008569)

CLP 074 Lacquer Red (Bullseye 008570)

CLP 111 Aquamarine (Bullseye 008474)

CLP 112 Green (Bullseye 008475)

CLP 113 Royal Blue (Bullseye 008489)

CLP 114 Blue (Bullseye 008476)

Item # Description # Colors

CLP BS Basic Set (BE 008470) 18

Color Line Enamel Pens – 2.2 oz.

Tip set, one each - small, medium, large.

Color Line Tip Set

Item # CLP 000 (Bullseye 008472).

Color Line Enamel Basic Set Color Line Basic Set includes 18 original enamel glass colors (2.2 oz. ea.): aquamarine, green, royal blue, blue, egyptian blue, deep sky blue, yellow, lemon, black, brown, maroon, sienna, mustard, orange, carmine, coral, lilac, and white.

Enamels & Accessories


PAIN

TS &

EN

AMEL

SD&L is committed to providing the newest products in a growing industry.

The mixing white Color Line Enamel Pen (Bullseye 008473) expands your color pallete. Utilize this accessory product with Color Line col-ors for a variety of shades.

Mixing White Pen - Color Line

Use accessory product Airbrush Medium (Bullseye 008471) to dilute any Color Line paint for airbrushing. It also accelerates the drying process on the glass surface to prevent running.

Airbrush Medium - Color Line

Item # Size

CLP 136 7 oz.

Add Color Line Flux (Bullseye 008548) to any color or col-or mix to add brilliance and translucence. The paint layer is very glossy with a percep-tion of depth. The Flux does not influence the shade or the firing temperature.

Flux – Color Line

Item # Size

CLP FLUX 10.5 oz.

If Color Line Paints are too thick or viscous for your application, add a small amount of Color Line Thin-ner (BE 008545). Test and repeat for your desired consistency.

Thinner – Color Line

Item # Size

CLP THINNER 1.76 oz.

Item # Size

CLP 129 2.2 oz.

Color Line - BullseyeAll colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

These high pigmentation pastes are are ideal for screen printing. They hold well on glass and offer optimal results even with a 120 mesh screen. The firing range is from 1300–1510°F (700–820°C). All colors have extremely strong pigmentation, are lead-free and freely mixable to obtain further shades. The paints are homogenous and smooth in a water-based medium and environmentally friendly. They're also easy to use in exactly the right amount ensuring low waste.

Silk Screen Paste - Color Line

Item # Description

CLSS 111 Aquamarine (Bullseye 008474-PSTE)

CLSS 112 Green (Bullseye 008475-PSTE)

CLSS 113 Royal Blue (Bullseye 008489-PSTE)

CLSS 117 Yellow (Bullseye 008479-PSTE)

CLSS 119 Black (Bullseye 008481-PSTE)

CLSS 120 Brown (Bullseye 008482-PSTE)

CLSS 124 Orange (Bullseye 008486-PSTE)

CLSS 125 Carmine (Bullseye 008487-PSTE)

CLSS 128 White (Bullseye 008491-PSTE)

Use the accessory product Mixing White (BE 008473-PSTE) with Color Line paste colors to achieve a variety of shades.

Mixing White Silk Screen Paste

Item # Size

CLSS 129 5.3 oz.

Use Silk Screen Medium with Color Line Silk Screen Paste to make it thinner. New Color Line Silk Screen Pastes are ready to print, but will thicken with air

Silk Screen Medium

Item # Size

CLSS SSM 8.5 oz.

exposure or prolonged storage. If your paste is too thick, gently stir in a few drops of Color Line Screen Printing Medium to thin to the desired consistency. Avoid creating bubbles in the paste and pop any large bubbles before printing.

Enamels, Pastes & Accessories



PAINTS & EN

AMELS

Colors for Earth

Colors for Earth enamels can be used on 90 COE, 96 COE, and float (window) glass, as well as an overglaze on glazed ceramic pieces. Lead-free & non-toxic colors. Apply these brilliant glass enamels as a powder or with a medium. They can be sifted, silk-screened, airbrushed, or painted, and can be applied to the bottom, top, or between layers of glass. These enamels are able to withstand multiple firings and are mixable; create your own palette!

This kit has every-thing you'll need for your next glass project! Kit includes 25 gm of each color, black outline, white outline, 2 oz. glass medium, 2 writer


CE GCK1 Full Color Kit 28

14 colors (1 oz. each) chosen from the underglaze line to enhance your glass enamel work.


CE GCEK Enhancer Kit 14

This color kit is perfect for creating realistic landscapes. Kit includes 1 oz. of each color: cobalt black, glacier white, cerulean, leaf green, yellow ochre, pow-


CE GCSK Scenery Color Kit 23

This is an introductory set of colors perfect for getting started. Kit includes .5 oz. of each color: coal black, gla-cier white, vermillion, lemon peel, yellow ochre, deep cranberry,


CE GSK Sampler Color Kit 14

These liquids are meant for glass enamels and are ready to use straight from the bottle. Matte finish. Kit includes 1 oz. bottle of white and black outline with

Detailing Black is used over the top of dried glass color. Make detail lines or touch up outlines you may have gone over with glass color.This product has a shiny finish (the Outline Black is a matte finish).

Detailing Black Glass Enamel

Glass Medium

Item # Size

CE GM2 2 oz.

CE GM8 8 oz.

Glass Enamel

Item # Description Size

CE G301 Cobalt Black 1 oz.

CE G302 White 1 oz.Use this glass medium to mix dry glass powders/enamels to a liquid state for application on glass. Food safe.

A white textured, stand-up glaze with a wide firing range from glass to porcelain/stoneware. Apply with a brush or tool. Tint with color concen-

Relief Motif Paste – 2 oz.

Item # CE RMP

All colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

caps and tips for outlining, plunger/cleaning tool for writer tips, colored flyer of glass colors, glass color basics sheets, 6 line art patterns, 2-96 COE 2x2 glass, and liner brush.

new bright violet, sapphire blue, powder blue, cerulean, leaf green, natural tan, sienna, burnt sienna, detailing black, 2 oz. glass medium, and brush.

der blue, sapphire blue, lemon peel, vellum grey, ivory, pumpkin, purple sage, teal, laurel green, moss green, burnt sienna, key lime, grape, bright violet, tea rose, burnt umber, light cerulean, nutmeg, detailing black, 2 oz. glass color medium, 2 pod storage containers, and liner brush.

caps/closures, 2 black bent tips, and plunger for cleaning the tips. Apply with brush, sponge, or writer bottle. Do not cap or put between glass.

Item # Description Finish

CE GOK Outline Kit Matte

Item # Description Finish Size

CE DB101 Detailing Black Shiny 1 oz.

trates or Colors for Earth fired glass powders. Shade with Color Concentrates or color strokes. Not recommended for food surfaces or for use under glazing.


Colors of the Earth Kits

Sampler Color Kit Scenery Color Kit Color Enhancer Kit

Full Color Beginner Kit

Outline Kit

The Glitz Kit comes with 5 non-toxic, metallic colors. Kit includes .5 oz. con-tainers of each color: opal ice, copper, gold, pearl, and burnished gold. Apply metallics


CE GZK Glitz Kit 5

on top of or between layers of glass & fire to full-fuse. These colors can be used alone or added to any other Colors for Earth glass enamels.

Glitz Kit


PAIN

TS &

EN

AMEL


Glassline PaintsAll colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Item # Description

FUS GL01 White

FUS GL02 Black

FUS GL03 Gray

FUS GL04 Dark Blue

FUS GL05 Turquoise

FUS GL06 Light Green

FUS GL07 Dark Green

FUS GL08 Yellow

FUS GL09 Orange

FUS GL10 Red Orange

FUS GL11 Brown

FUS GL12 Pink

FUS GL13 Crimson

FUS GL14 Purple

FUS GL20 Amethyst

FUS GL21 Lavender

FUS GL22 Teal

FUS GL23 Kelly Green

FUS GL24 Camel

Glassline Paint Bottles – 2 oz.

Item # Description

FUS GL17 Copper Metallic

FUS GL18 Gold Metallic

FUS GL19 Bronze Patina Metallic

Item # Description

FUS GL25 Carbon Blue

FUS GL27 Marigold

FUS GL28 Ivory

FUS GL29 Periwinkle

FUS GL30 Terracotta

FUS GL31 Sesame

FUS GL32 Deep Red

FUS GL37 Dusty Rose

FUS GL38 Coral

FUS GL39 Marine

FUS GL40 Sand

FUS GL41 Butterscotch

FUS GL42 Summer Sun

FUS GL43 Peach

FUS GL44 Celadon

FUS GL45 Mist

FUS GL46 Aqua

FUS GL47 Blue Ice

FUS GL48 Aegean

Glassline Paints are used as a lining and shading material for glass. They are simple in design, easy to use, and can be thinned with water. Glassline colors may also be sprayed or airbrushed to achieve subtle shading variations on glass.

The Glassline colors can be applied between multiple layers of glass or on the top surface for a complex dimensional look. Glassline Pen colors are compatible with most types of glass from float to 90 COE and System 96. Glassline colors are best fired to 1500°F, but may be fired lower or higher depending upon desired results. Glassline Paints are available in more than thirty vibrant standard colors and metallic colors. Glassline products are lead-free and food safe when fired.

Original Paint Set14 colors (2 oz. bottles). Includes: white, black, gray, dark blue, turquoise, light green, dark green, yellow,

Item # FUS GLPS

orange, red orange, brown, pink, crimson, purple, and applicator tip set - 3 sizes.

Tropical Paint Set14 colors (2 oz. bottles). Includes: white, black, yellow, marigold, orange, red orange, deep

Item # FUS GLTPS

red, terracotta, brown, camel, sesame, ivory, pink, crimson, and applicator tip set - 3 sizes.

Glacial Paint Set14 colors (2 oz. bottles). Includes: white, black, gray, carbon blue, dark blue, periwinkle,

Item # FUS GLGPS

turquoise, light green, kelly green, dark green, teal, lavender, amethyst, purple, and applicator tip set - 3 sizes.

Beach Paint Set14 colors (2 oz. bottles). Includes: white, black, celadon, mist, blue ice, aqua, aegean,

Item # FUS GLBPS

marine, sand, summer sun, butterscotch, peach, dusty rose, coral and applicator tip set - 3 sizes.

Glassline Metallic Paint – 2 oz.

The Glassline De-luxe Tip Applicator Set comes with one non-clogging, air-tight cap with wire and fine (yellow), medium (green), and bold (pink)

Deluxe Tip Applicator Set

Item # FUS GLTDA

Attach to paint bottles for a variety of line widths. One each of fine, medium, and bold.

Glassline Tip Set

Item # FUS GLTS

Glassline Paint

tips. Simply place the tips on a Glassline Pen applicator bottle and start creating a variety of line widths.

Paints & Accessories



PAINTS & EN

AMELS

Glassline PaintsAll colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Glassline Bubble Paint Bottles – 2 oz.

Add bubbles to your glass art with Glassline Bubble Paint. Easy to use, simple in design, and water based, Bubble Paint is formulated to be used be-tween layers of glass. When sandwiched between glass, a colored line made up of micro bubbles will develop.

Bubble Paints work with both 90 and 96 COE. While best fired from 1450–1500°, your glass art may be fired lower or higher depending upon your desired results.

Champagne Bubble Paint Kit

Champagne kit contains all 14 bubble colors and a 3 piece tip set.

Item # FUS GLBCK

Item # Description

FUS GLC01 White

FUS GLC02 Black

FUS GLC03 Gray

FUS GLC04 Dark Blue

FUS GLC05 Turquoise

FUS GLC06 Light Green

FUS GLC07 Dark Green

Glassline Chalk – 3/8" Round x 3" Long

Item # Description

FUS GLC08 Yellow

FUS GLC09 Orange

FUS GLC10 Red Orange

FUS GLC11 Brown

FUS GLC12 Pink

FUS GLC13 Crimson

FUS GLC14 Purple

Glassline Bubble Paint

Glassline Chalk Glassline Chalks may be used to draw on etched or sandblasted glass. The chalks can be used on the top or bottom surfaces of glass and then layered for a dimensional look. Different chalks can be layered one on top of the other for a blend of colors. Glassline Paints and Chalks may be combined on the same piece. A charcoal-like drawing can be done with Glassline Chalks and then outlined or accented with Glassline Pens.

Glassline Chalk colors are compatible with most types of glass from float to 90 COE and System 96. Glassline Chalk colors are best fired to 1500°F, but may be fired lower or higher depending upon desired results. Glassline Chalks are available in more than a dozen vibrant standard colors and metallic colors. Glassline products are lead-free and food safe when fired.

Glassline Chalk Set

Glassline Chalk Set - 14 colors. One each - 3/8" round x 3" long. Colors include: white, black, gray,

Item # FUS GLCS

dark blue, turquoise, light green, dark green, yellow, orange, brown, pink, crimson, and purple.

Item # Description

FUS GLC17 Copper Metallic

FUS GLC18 Gold Metallic

FUS GLC19 Bronze Patina Metallic

Glassline Metallic Chalk 3/8" Round x 3" Long.

Paints & Chalks

Item # Description

FUS GLB01 Ginger Ale

FUS GLB02 Charcoal

FUS GLB03 Cotton Candy

FUS GLB04 Tangerine

FUS GLB05 Garnet

FUS GLB06 Wild Plum

FUS GLB07 Mahogany

Item # Description

FUS GLB08 Daffodil

FUS GLB09 Lime

FUS GLB10 Spruce

FUS GLB11 Robins Egg

FUS GLB12 Teal Green

FUS GLB13 Cobalt Blue

FUS GLB14 Deep Blue


PAIN

TS &

EN

AMEL


Fuse Master All colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Transparent Enamel – 1 oz.

Item # Description

FM TE 01 Lime

FM TE 02 Emerald

FM TE 03 Ice Blue

FM TE 04 Yellow/Green

FM TE 05 Olive

FM TE 06 Blue Green

FM TE 07 Teal Blue

FM TE 08 True Blue

FM TE 09 Sky Blue

FM TE 10 Purple

FM TE 11 Beet Red

FM TE 12 Rose

FM TE 13 Dark Rose

FM TE 14 Gray Blue

FM TE 15 Navy

FM TE 16 Cobalt

FM TE 17 Peacock Blue

FM TE 18 Neptune Blue

FM TE 19 Light Blue

FM TE 20 Confederate Gray

Item # Description

FM TE 21 Ginger

FM TE 22 Golden Brown

FM TE 24 Asphalt Gray

FM TE 25 Black

FM TE 26 Chocolate

FM TE 27 Cranberry

FM TE 28 Chinese Red

FM TE 29 Fuschia Pink

FM TE 30 Lt Terra Cotta

FM TE 31 Brick Red

FM TE 32 Mink Brown

FM TE 33 Gold

FM TE 34 Lemon Yellow

FM TE 35 California Orange

FM TE 36 Amber

FM TE 37 Florida Orange

FM TE 38 Mahogany

FM TE 39 Sea Green

FM TE 40 Plum

FM TE 41 Obscuring White

The rich, vibrant colors and ease of application make Fuse Master Transparent enamels one of the most popular brands available. Viewed in transmitted light, these colors rival the brilliance and intensity of stained glass. These intermixable colors do not require any extra grinding, and matures at 1175°F, bending and slumping temperature. The stock colors may be used individually or blended to create special col-ors for shading or fine detail. They may be brushed, sponged, silk-screened, air brushed, or sifted on almost any type of clear or colored glass. When applied with water-friendly medium, clean up only requires water. These colors are NOT approved for food-bearing surfaces.

Lead-free Hi-Fire Opaque Enamel Set (1 oz. each - yellow, red, blue, black, white) and 1 oz. water friendly

Item # FM OHI PS

Lead-free Low-Fire Opaque Enamel Set (1 oz. each - green, red, blue, black, white-and 1 oz. water

Item # FM OLO SK

friendly medium). They are ideal for work on float / window glass as well as 90 and 96 fus-ing glass. They mature at bending temperature (1175–1400°F). These colors are NOT approved for food-bearing surfaces.

Enamels

EZ Fire Enamel Kit & Sets

Item # EZ CKIT

EZ Cool Enamel KitUse these seven high-fire enamels for fusing and glass blowing. Compatible with all types of glass. This set includes 1 Instruction

Sheet, Fired Glass Samples, 1 teaspoon each of seven enamels (EZ 311 - Grass Green, EZ 312 - Chrome Green, EZ 313 - Russian Green, EZ 314 - Turquoise, EZ 315 - Light Blue, EZ 316 - Blue and EZ 321 - Real Teal) and 1 ounce of Fuse Master Water Friendly Medium.

Item # EZ HKIT

EZ Hot Enamel KitUse these seven high-fire enamels for fusing and glass blowing. Compatible with all types of glass. This set includes 1 Instruction

Sheet, Fired Glass Samples, 1 teaspoon each of seven enamels (EZ 301 - Sun Yellow, EZ 302 - Yellow Orange, EZ 303 - Dark Orange, EZ 304 - Light Yellow, EZ 305 - Red, EZ 306 - Dark Red and EZ 307 - Light Purple) and 1 ounce of Fuse Master water friendly medium.

Item # EZ MKIT

EZ Metallic Enamel KitUse these six high-fire enamels for fusing and glass blowing. Compatible with all types of glass. This set includes 1 Instruction

Sheet, Fired Glass Samples, 1 teaspoon each of six enamels (EZ 444 - Pearl, EZ 445 - Gold, EZ 446 - Red Gold, EZ 447 - Bronze, EZ 448 - Copper and EZ 449 - Ruby Red)) and 1 oz. of Fuse Master water friendly medium.

Low-Fire Opaque Enamel Set Hi-Fire Opaque Enamel Set

medium. These vibrant enamels mature at the glass fusing temperature range of 1300° - 1550°F.



PAINTS & EN

AMELS

Item # Description

EZ 301 Sun Yellow

EZ 302 Yellow Orange

EZ 305 Red

EZ 307 Light Purple

EZ 308 Opaque White

EZ 309 Mixing White

EZ 310 Black

EZ 311 Grass Green

EZ 312 Chrome Green

EZ 313 Russian Green

EZ 314 Turquoise

EZ 316 Blue

EZ 318 Gray

EZ 319 Golden Brown

EZ 321 Real Teal

EZ 323 Gold Pink

EZ 324 Gold Purple

EZ 326 Chocolate

EZ 327 Ultra Violet

EZ 328 Citrus

EZ 444 Metallic Pearl

EZ 445 Metallic Gold

EZ 446 Red Gold

EZ 447 Metallic Bronze

EZ 448 Copper

EZ 449 Ruby Red

A new collection of scorching hot and deep cool colors that are easy to fire and don't require venting. The color palette includes rich cool tones, and standout colors – vibrant reds, oranges and yellows that can handle temperatures up to 1650°F and can be used for full fuse firings, glass blowing and lampworking without burning out. Easy Fire Enamels are a very fine grind which can be brushed, silkscreen printed, stippled or air brushed. One ounce of enamel covers approx. 3.7 square feet of glass, an inex-pensive alternative to sheet glass. These colors are NOT approved for food-bearing surfaces.

EZ Fire Enamel – 1 oz. Hi-Fire Opaque Enamel – 1 oz.

Item # Description

FM OHI 112 Green

FM OHI 114 Blue

FM OHI 115 Teal

FM OHI 117 Canary Yellow

FM OHI 119 Black

FM OHI 120 Brown

FM OHI 122 Ochre

FM OHI 124 Dark Red

FM OHI 125 Orange

FM OHI 128 Bright White

Hi-Fire Lead-Free Opaque Enamels consist of intermixable enamels that blend so well that a complete spectrum of hues and shades may be achieved with a basic stock of colors. These colors may also be used in beadmaking and for adding color to any pate-de-verre project. Mix Opaque Enamels with a water-friendly me-dium, then air brush, paint, sift or sponge on the top of glass or sandwiched between layers of glass. These vibrant enamels mature at the glass fusing temperature range of 1300–1550°F. Approved for food-bearing surfaces.Item # Description

FM OLO 01 Mocha

FM OLO 02 Brown

FM OLO 03 Green

FM OLO 04 Spring Green

FM OLO 05 Black

FM OLO 06 Russet Red

FM OLO 07 Burgundy

FM OLO 08 Lacq. Red

FM OLO 09 Red Passion

FM OLO 10 Peacock Blue

FM OLO 12 Grey

FM OLO 13 Taupe

FM OLO 14 Aluminum

FM OLO 15 White

FM OLO 16 Turquoise

FM OLO 17 Blue

FM OLO 18 Amber

FM OLO 19 Lemon

FM OLO 20 Canary

FM OLO 21 Mango

FM OLO 22 Orange

FM OLO 23 Cocoa

FM OLO 24 Dark Chocolate

Lo-Fire Opaque Enamel – 1 oz. Lo-Fire Lead-Free Opaque Enamels consist of intermixable opaque enamels that can be used on just about any glass.

Ideal for work on float/window glass as well as 90 COE and System 96 fusing glass. They mature at bending temperature (1175–1275°F) so they can be applied and matured during a slump firing.These colors are NOT approved for food-bearing surfaces.

Fuse Master All colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Enamels


PAIN

TS &

EN

AMEL


Reusche PaintAll colors can be viewed @ www.dlartglass.com. Find brushes, airbrushes, & paint accessories on page 34.

Item # Description

RC 51R001 Snow White

RC 51R002 True White

RC 52R001 Yellow

RC 53R003 Dark Green

RC 53R004 Apple Green

RC 54R001 Strong Blue

RC 55R001 Flesh Red

RC 55R002 Persian Red

RC 56R001 Umber Brown

RC 56R005 Ancient Brown

RC 56R006 Sepia Brown

RC 56R007 Bister Brown Dark

RC 56R014 Yellow Brown

RC 56R501 Ivory Tan

RC 57R005 Best Black

RC 57R502 Silver Grey

RC 58R001 Rose Pink

RC 59R001 Blue Violet Purple

Item # Description

Traditional Stain - 1 oz.

The same type of paints used in the centuries-old art of traditional glass painting and included in the Peter McGrain Traditional Glass Painting Kit. A wide variety of colors are available, primarily soft, muted shades of earth tones. Colors are mixable to expand your palette. These traditional paints are lead and cadmium free. Just mix with a carrier and binder and apply to your glass, then fire between 1150–1400°F. These colors are NOT approved for food-bearing surfaces.

Enamels are vitreous glass paints and become transparent at lower temperatures than the tradi-tional stainers. These transparent enamels mature between 1050–1080°F. Multiple firings may be required to achieve maximum color saturation. Contain lead. These colors are NOT approved for food-bearing surfaces.

The entire line of Reusche paint and enamel products are

available by special order. Just call!

Transparent Enamel - 1 oz.

Item # Description

RC TE 1090 Blue

RC TE 1326A Flesh Tint Transp.

RC TE D221620 Violet

RC TE D22891 Carmine

RC TE D231176 Amber

RC TE D261676 Green

RC TE D26346 Teal Green

RC TE D26762 Turquiose

Item # Description

Silver Stains' color and tone will vary with appli-cation thickness, substrate material, and firing temperatures. Can be mixed with water or vin-egar and applied as a matte to create beautiful transparent color fields. RC SS 1383 Orange #2 Amber fires to produce shades of rich yellow to amber. RC SS 1384 Yellow #3 fires to produce shades of medium yellow.

Silver Stain – 2 oz.

ID Item # Description

A RC SS 1383 Orange No. 2 (Amber)

B RC SS 1384 Yellow No. 3

A B

Kit contains: Instruction manual, three 2 oz. bottles of Re-usche glass paint (tracing black, bistre brown, and umber brown), 3"

Peter McGrain Deluxe Traditional Glass Painting Kit

Item # PMG TGPK

Badger Blender brush, 2" applicator brush, #3 tracer brush, 4 assorted stippling brushes, glass eyedropper, pallet knife, plastic storage box.

Stains, Enamels & More



PAINTS & EN

AMELS

Paints, Dichro & Mica Powders

Mica Powders

Item # Description

FUS MPAG Aztec Gold

FUS MPMP Magna Pearl

FUS MPSB Super Bronze

FUS MPSC Super Copper

FUS MPSG Sparkle Gold

FUS MPSS Super Sparkle

Can be fused between layers or applied on top like a fine-mesh enamel. Sift, brush or air brush. Fire to tack or full fuse. Available in a variety of metallic colors.

A set of 12 different colors each in 10 gram jars for easy use and storage. Each color has been extensively tested to ensure they produce a solid strong

Item # FUS MP12

Aztec Gold Shown

color when fired to either tack or full fuse.Colors include: aqua, bronze, chocolate, copper, deep gold, green, medium gold, pale gold, pink, purple, russet, silver.

Hues to Fuse non-toxic glass colors can be applied as powder, blended with media and brushed on, or applied with the applicator bottle. This all inclusive kit includes a 1 oz. bottle of dry pigment for each of 16 vibrant colors: merlot, lobster, sepia, turf, peacock, sprout, rubber ducky, saffron, reef, henna, dam-

Item # FUS H2FK

sel, prussia, chateau, majesty, fog, and shell pink. Kit also includes: blended 1 oz. bottle of textured black, blended 1 oz. bottle of textured white, 2 oz. flip-top bottle of glass media, an applicator bottle with tip and instructions. Fire to 1400-1650°F.

Glow Pigment Powder

Make your glass art glow in the dark! Yellow, blue & aqua glow pig-ments will be a bright, luminescent addition to any art glass. This versatile powder works

ID Item # Description Size

A CBS GPA Aqua 1 oz.

B CBS GPB Blue 1 oz.

C CBS GPY Yellow 1 oz.

BA

C

with any COE glass and can be used in fusing, casting, glass blowing, and lampworking.

Mica Powder Set

Mica Individual Jars – 3.5 oz.

Hues to Fuse Full Kit


A FUS MPNAC Nu-Antique Copper

B FUS MPNAS Nu-Antique Silver

BA

Mica Nu-Antique – 3.5 oz.

Fuse Paint Kit


PAIN

TS &

EN

AMEL


Thompson Enamel

This set of 12 colored lus-ters embedded in a wax medium makes for easy fusing and beadmaking application.

Item # Colors

THO WCLSET 12

Fires at 1400–1500°F. Float Glass Enamels Sample Set (5000 & 6000 series).

Item # Colors

THO SAMPE 62

Fires at 1450–1550°F. 96 COE Enamels Sample Set (7000-8000 series).

Item # Colors

THO SAMPF 43

104 COE (Moretti) Enam-els Sample Set (9000 series).

Item # Colors

THO SAMPG 46

A 13 color mica/luster set. For 82, 90, 96, and 104 COE.

Item # Colors

THO LTK1 13

Flexi-GlassEnamel

Flexi-Glass Enamels react with Flexi-Glass Medium to make threads of glass.


FUS FGE14 Blue 1 oz.

FUS FGE17 Yellow 1 oz.

FUS FGE19 Black 1 oz.

FUS FGE20 Brown 1 oz.

FUS FGE24 Red 1 oz.

Luster

Flexi-Glass Luster is a fine powdered mica that is used to make flexible luster sheets that can be cut with punches or scissors.


FUS FGGL Gold Luster .5 oz.

FUS FGSL Silver Luster .5 oz.

Flexi-Glass Kit

The Flexi-Glass Kit is a great way to get started with the Flexi-Glass system. The kit contains everything you need. Includes: 5 Flexi-Glass Transfer Sheets; 2 bags of Flexi-Glass Enamels (black and blue), 1 Silver Luster Mica; 1 - 4 oz. bottle of Flexi-Glass Medium.

Item # Description

FUS FGKIT Kit

Use Flexi-Glass products to create your own fusible paper-like glass film, which you can cut with scissors and then fuse. Flexi-Glass is formulated to work with powdered and fine glass frit, enamels, and even micas or luster. Create your own threads of fusible colored enamel. Works with both 90 and 96 COE.

MediumFlexi-Glass Medium is a liquid bonding agent that is flexible when dry and is formulated to work with powdered and fine glass frit, enamels, and even

Item # Size

FUS FGM4 4 oz.

FUS FGM16 16 oz.

Transfer Sheet Flexi-Glass Transfer Sheets are designed to be used with Flexi-Glass medium. Transfer sheets are a specially designed plastic that does not cause the

Item # Size Qty

FUS FGTR 9 x 12" 5 pk.

micas or luster. Simply mix a 1:1 ratio of Flexi-Glass medium with rubbing alcohol and brush mixture onto a Flexi-Glass transfer sheet.

Flexi-Glass medium to bead up when applied wet. Will withstand temperatures up to 350° for drying the Flexi-Glass Medium and will not stick to the medium after it is dry.


Thompson Enamels

Thompson Enamels offers a wide range of enamels for glass and metal applications. D&L stocks sample sets of enamels for 82/Float, 96 and 104 COE glass. Sample sets contain approximately 17 grams per color of 80 mesh enamels. The full line of Thompson Enamels are available by special order in multiple mesh sizes and quantities–just call or email.

Float Glass Enamels Sample Set 96 COE Enamels Sample Set 104 COE (Moretti) Enamels Sample Set

Carefree Water Color Set Carefree Powder Pack



PAINTS & EN

AMELS

Kit includes five 2 oz. jars of water-based, non-fired acrylic stains that can be applied to ceramic bisque to create a “Pickled” finish with a metallic shimmer. Colors include: beige, taupe, blue, slate, brown.

Pickling Stain Color Kit

Item # CPI PIK

The paints will add a real metal surface to your art glass work. Paints are composed of actual ground metal particles which can be applied to most surfaces, e.g., glass, ceramics, wood, or paper.Kit includes one (2 oz. bottle) of each: copper metallic, dark bronze metallic, gold metallic, steel metallic, aqua blue patina, rapid rust.Paints, patinas and tints can be applied with brushes, sponges, stamps, etc. Patinas may also be sprayed. All paints are non-toxic & clean up with water.

Magic Metallics Assorted Kit

Item # MMT AK

Non-Firing Paints

Paints & Stains

Color MagicTM No-Fire Paints - .5 oz.Color Magic™ no-fire paint can be used on metal, glass and other surfaces. Unlike water based paints, Color Magic™ is unique in its durability, versatil-ity, vividness, and wide range of opaques, transparents, and metallics. Paint can be applied with the included brush, sponged on, airbrushed, or used with an eyedropper. Paints are available in a variety of colors and finishes.

Item # Description

CM 202 Apricot Transparent

CM 204 Black Onyx Transparent

CM 209 Hot Pink Transparent

CM 214 Leaf Green Transparent

CM 215 Lemon Yellow Transparent

CM 219 Raspberry Transparent

CM 221 Royal Blue Transparent

CM 222 Ruby Red Transparent

CM 226 Spring Green Transparent

CM 228 Teal Blue Transparent

CM 230 Topaz Brown Transparent

CM 234 Vivid Purple Transparent

CM 235 White Pearl Transparent

CM 237 Sunset Orange Transparent

Item # Description

CM 203 Black Matte Opal

CM 206 Bright Gold Opal

CM 207 Flesh Tone Opal

CM 212 Kelly Green Opal

CM 213 Lapis Blue Opal

CM 216 Medium Gray Opal

CM 217 Peach Opal

CM 218 Pink Opal

CM 220 Red Poppy Opal

CM 223 Silver Opal

CM 225 Snow White Opal

CM 227 Sun Yellow Opal

CM 231 Turquoise Opal

CM 233 Violet Opal

CM 238 Grape Opal

CM 239 Autumn Orange Opal

Item # Description

CM 208 Gold Glitter Transparent

CM 210 Iridescent Frost Transparent

CM 211 Iridescent Glitter Transparent

CM 224 Silver Glitter Transparent

Color MagicTM – Transparent Color MagicTM – Opal

Color MagicTM – Glitter & Iridescent Transparent

Color MagicTM – Thinner

Item # CM THIN

FOR COLD APPLICATIONS

ALL PAINTS ON THIS PAGE– CAN NOT BE KILN FIRED –


PAIN

TS &

EN

AMEL


Dichroic Extract

Dichroic Extract

Dichroic Extract is a pure form of CBS's high quality coatings literally extracted off of the glass and preserved in a glass contain-er. This innovative product gives the user a stable, brilliantly colored Dichroic effect. Currently available in six solid colors, two types of Rainbow Patterns and a sample set. As there is no coefficient (COE) associated with the Dichroic Extract, it can be used much like a gold-flake or powder. Achieve amazing results using the product in flame-working, glass blowing, fusing, stippling, painting and various other artistic methods. Dichroic Extract is sold in sheet glass equivalence.

Color / DescriptionFull Sheet Equivalent

1/2 Sheet Equivalent



Cyan Copper DI EX 1 CC DI EX 12 CC DI EX 14 CC DI EX 18 CC

Cyan/Dark Dark Red DI EX 1 CDDR DI EX 12 CDDR DI EX 14 CDDR DI EX 18 CDDR

Emerald DI EX 1 EM DI EX 12 EM DI EX 14 EM DI EX 18 EM

Green Magenta DI EX 1 GM DI EX 12 GM DI EX 14 GM DI EX 18 GM

Red Silver DI EX 1 RS DI EX 12 RS DI EX 14 RS DI EX 18 RS

Yellow Blue DI EX 1 YB DI EX 12 YB DI EX 14 YB DI EX 18 YB

Dichroic Extract – Individual Containers

6 colors; 1/8 sheet equivalent each.

Item # DI EX CSS

Standard Color Sample Set

8 colors; full sheet equivalent.

Item # DI EX RB1 SS

Rainbow 1 Sample Set

8 colors; full sheet equivalent.

Item # DI EX RB3 SS

Rainbow 3 (Splinter) Sample

CBS Dichroic Extract



PAINTS & EN

AMELS

Glass Tattoo Goo packs. Simply mix the goo with the designat-ed amount of water and bleach, stencil it over your glass project, and fire.

Glass Tattoo Goo

Glass Tattoo Stencil Kits

Item # DescriptionSize per

Pack

WGT 105 5 pk. 8 grams

Create beautiful, crisp, raised designs on your glass art with Wardell's Glass Tattoo Stencil Kits and your favorite color of powdered frit (sold separately).


A WGT KT16 Sea Creatures

B WGT KT12 Plant Life

C WGT KT13 Christmas

A B

CGlass Tattoo Kits include: 3 glass Tattoo Stencils, 1 packet of Glass Tattoo Goo, 3 squeeze bottles with applicator tops, 1 spreader knife, and 2 suction lifter tabs. Glass Tattoo accessories can be found on page 37.

NO Days

NO Days Powder Wafers are a simple and effective way to create detailed patterns and designs in glass without extra tools or special-ized materials. For use with glass powders.


NDG PW12 Wafer 12 x 12"

Powder Wafers

NO Days ThinFuse is a thin adhesive film designed for adhering glass tiles to glass substrates for fusible mosaic designs. The thin film form of ThinFuse allows you to apply an ad-hesive layer to your glass

Item # Size

NDG TFA 12 x 24"

ThinFuse Adhesive

Starter Kit


GLB MGK Molding Glass Starter Kit 3.5 oz Powder / 2 fl. oz. Liquid

GLB PB02 Powdered Binder Refill 7 oz.

GLB LM02 Liquid Medium Refill 4 oz.

Modeling Glass

Modeling Glass is easy to use and gives artists a whole new way to work with hand-sculpted shapes. Transform powdered glass into a firm, non-sticky material like clay! No molds or freezing required.This unique two-part kit consists of a powdered binder and liquid medium that combine with water and frit (sold separately) to become a workable, non-sticky clay-like consistency. Once combined create coils, roll flat, cut out shapes, or press into silicone molds! Sand, carve, and modify until you

achieve the perfect effect; most details remain during tack fusing.During firing, the binder and medium will burn away, and do not affect the compatibility of the glass. It can be used with either COE 90 or 96 glass, and at full-fuse temperatures, colors remain true. Kit makes over 3 pounds of modeling glass and comes with complete instructions for mixing, use, storage, and a suggested basic firing schedule. Kit contains: 3.5 oz. Powdered Binder & 2 fl. oz. Liquid Medium.

Pattern Making Kits & Molding Glass

substrate and design your glass tile pattern on top. NO Days Thinfuse is designed to fully burn off in your kiln leaving behind NO Residue.


TOO

LS &

ACC

ESSO

RIES


Tools

Perfect for weighing frit into casting molds. Mea-sures in grams, ounces and pounds. Features: 8 x 6 x 1.25" with 5-3/8" tray, resolution of 0.1 oz. or 1 gm increments,

Item # Capacity

ES DS 11 lb. or 5 Kg

The ES DSP is a 4.5 x 3.75 x 1" scale with an extra-sensitive capacity. Features: displays in ounces, pounds, pounds + ounces and grams,

Item # Capacity

ES DSP 17.6 oz. or 500 grams

tare feature subtracts the container's weight to obtain the weight of its contents, automatic shut-off, batteries included.

counting feature, resolution of 0.1 gram or 0.005 ounce increments, automatic shut-off, battery included.

Badger Airbrush Sets

A simple and effective basic air spray gun set that works with diluted Micas, Color Line Paints, and Glassline Paints. This tool is perfect for stencil work and to apply an overall coverage of medium on a surface.

ID Item # Model

A FUS 250 3 250-3

B FUS 350 3 350-3

C FUS 50 202 Propellant - 15 oz.

B

Tools

AModel 250-3 contains 250 spray gun with attached jar, propel regulator, air hose, extra jar, propel can, and instruction manual. The 350-3 features spray adjustment from fine to broad, and applies a larger volume of material than the 250-3 model. Model 350-3 contains airbrush with jar, air hose, extra jar, 1/4 oz. color cup, propel regulator, propel, wrench and instruction manual.

C

Digital Scales

Includes (1 each):Washout sprayer, Washout board, SR3000 Photo resist film, & 3mil, 5 sheets (8.5" x 14")

Photo Resist Washout Bundle

Item # PHS ROK

The Ryonet 20" x 24" table top exposure unit provides crisp images with pro-fessional efficiency. It has a robust powerful exposure

Ryonet UV Screen Exposure Unit

Item # PHS EX2024

unit encased in a high quality welded extrud-ed aluminum box. The built-in automatic timer and automatic shut-off helps to prevent over-exposing. Included is a thick foam pad for applying positive pressure onto the glass panel providing fine detail on your screens.

Apply paints and enam-els precisely and easily with the AirPen Color Dispenser.The AirPen Color Dis-penser is a hand held, air-powered tool for

drawing very fine decorative details or for filling intricate areas. Viscous mediums, such as Color Line and Glassline, are effortlessly dispensed by placing a finger over the flow control hole. The AirPen Color Dispenser includes anti-gravity piston "followers" which allow you to work on a vertical surface. The patented product is drip-free and supplied with a 110V air pump. Includes: compressor, cartridges, tips, and full instructions.

AirPen Color Dispenser Kit

Item # SLK APCD

Keep your studio and kilns clean and safe with a HEPA vacuum. The Nilfisk GD 930 is a canister vacuum cleaner designed for solid performance in abusive environments. Its tremendous suction power and durable construc-tion make it a reliable choice for demanding applications, such as mold or asbestos remediation. A superior filtration system, including a standard HEPA filter, ensures a safer work environment.A multi-stage filtration system features a paper bag, foam filter and an

upstream HEPA filter, helping to ensure indoor air quality. The HEPA filter is capable of filtering 99.97% of particles, down to and including 0.3 microns. Quiet operation. For dry applications only.HEPA-filtered vacuum with 1000 watt motor includes: 6' hose assembly with bent wand, telescopic wand, combination floor nozzle, crevice tool, combination round dust brush/upholstery tool, and one paper bag. Specifications: Weight: 16.5 lbs., 1.34 hp motor, 74 cfm (cubic feet per minute) air-flow, 92" water-lift (how many inches up a tube the vacuum motor's intake can pull up water). Runs on 115 volts. Will hold a max volume of 4 gallons.

Nilfisk Euroclean HEPA Vacuum

Item # NFK HEPV

Designed to help provide the worker comfortable, reliable respiratory protection against certain non-oil based particles. It's ideal for use with glass

Respirator N100 Dust Mask

Item # SE N100

frits or enamels containing lead, cadmium or other potentially harmful materials. A higher level of protection than SE N95 particulate mask.Features include: N100 Approved, NIOSH's highest rated filtration efficiency in a disposable respirator. 3M™ Cool Flow™ Exhalation ValveComfortable foam faceseal. Individually packaged, lightweight, disposable. Suggested applications: Ideal for certain OSHA substance specific contaminants including lead, MDA, arsenic, cadmium, (excluding asbestos); also can be used for welding, pharmaceutical manufac-turing.

Features include: 3-panel respirator with innovative design. Low profile. Conforms to a wide range of face sizes. Comfortable to wear. Adjustable

Respirator N95 Dust Masks

Item # SE N95

noseclip provides a custom fit and secure seal. Specifications: Mask Type: N95 Particulate - Not for gas or vapors. Application: Dust, Mist.



TOO

LS & ACCESSORIES

Frit Maker Make frit with this durable glass-crushing frit maker made of welded steel. Overall height: 11" Piston dia.: 3". Chamber depth: approx 5".

Frit Sorter - Economy

Frit Sorters & Sifters

Sort your hand-made frit with this sorter/sifter set. Includes 4 galvanized nesting steel cups with stainless steel sorting screens.

Frit Sorter/SifterGreat for sorting frit by size. Pour in the frit and shake to sift. The Sifter sorts into the 5 different trays.Wood boxes eliminate metal filings. Heavy

Sifters

An invaluable tool for the glass artist. These frit sifters are the right mesh sizes for achieving an even dispersal in powders and fine size frit.

BA

ID Item # Type

A BE 8237 Powder

B BE 8238 Fine

Painting with Light Tool PackTool Kit includes four stencils, three sifters, a graining comb, and GlasTac.

Item # AAN FMK

Item # AAN EFS

Item # FUS FS

Item # BE 8362

Enamel Sifter

Lightweight plastic sifters with 40 mesh screens. Rub the ribbed handle with a pencil to vibrate powders through the screen.


FUS ESS Small .5"

FUS ESM Medium 1.25"

FUS ESL Large 2"

Line SifterThese specially made sifters are used to sift precise lines of enamel. Only 80 mesh or smaller enamel particles should be used.

Item # Size

FUS LS116 1/16"

FUS LS132 1/32"

This two-in-one tool is great for frit work, bead work, and more! Comes with textured grip handle.

Item # Size

FUS TWS 7"

Powder Vibe - Unit and TipPrecisely dispense frits or enamels onto any surface. The precision tip allows frit to flow smoothly to the surface

Item # BFA PVK

JC Sifter w/Coil ActuatorJC sifters are equipped with an easy to use coil actuator that allows for one-handed operation. The 40 mesh screen is perfect for glass pow-ders and enamels. Also

Item # Size

JCS 840 8mm, 40 mesh



JCS 1160XF 11 mm, 60 mesh extra fine

Use this handy scoop to apply frit, powders, or enamels onto your glass. 6" overall length, 2.5" at the widest point. Scoop has a flat bottom, so it won't tip over.

Item # Size

FUS FPS 6"

Line & Dot Sifter w/Coil ActuatorLine and dot sifter for fine and powdered glass or enamels. JC sifters are equipped with an easy to use coil actuator that allow for one handed operation. Made in the

Item # JCS LDS

to create continuous lines, dots and swirls with a press of the switch. Its convenient “easy touch” speed control in the handle allows for accuracy and consistency. Requires two AAA batteries, not included.

Bottom cup 0.20mm, fine mesh SS; 2nd cup + 0.20mm 1.20mm, mesh SS; 3rd cup + 1.20mm 2.70mm, mesh SS; Upper cup + 2.70mm 5.20mm, mesh SS.Cups size: 6 dia. x 4" deep.

gauge metal screens, screen cleaner and magnet included.

available in 60 mesh for CBS Glow pigment or extra fine enamels. JC sifters are made in the US with quality steel and brass construction with rubber coated handles.

US with quality steel and brass construction with rubber coated handles.

Tools

Tweezer with Shovel

Frit / Powder Scoop


TOO

LS &

ACC

ESSO

RIES


Brushes


A CE LBR Liner Brush

B CE BRS4 Shading Brush #4

A B


A PMG AB2 Camel Hair 2"

B PMG BH3 Badger Hair 3"

Use these brushes for creating high-lights and textures.Specially designed and recommended by

Stippler Variety Pack

leading glass painting artist Peter McGrain, the Stippler Variety Pack contains 18 brushes and a carrying case.

Item # PMG SVP

Set of five imported ox hair brushes. Includes tracing sizes #1, #3, #5, #7 and #9. Selected

Peter McGrain Tracing Brush Set

Item # PMG TBS

Brushes & Pens

Flat, wide brush, ideal for applying media over large areas; use for kiln-wash, paints or enamels.

Item # FUS HB

Application Pens for use with Liquid Gold or Color Magic paints. Fill the reservoir and easily draw lines.

Gold Pen


A FUS GPL Large Tip

B FUS GPS Small/Fine Tip

B

Incorporate real gold em-bellishments to your work with Liquid Gold. Apply with brush or gold pen, allow to dry, and kiln-fire.Fires at 1150–1300°; venti-

Bright Liquid Gold - 2 gm

Item # HC BLG2

late room while firing. For thinning liquid gold or cleaning brushes and pens use M14 essence.

Use Essence to thin liquid metal material or to clean brushes or applicator pens. A more versatile, flowing method to apply real

Essence – 1/2 oz.

Item # THO M14

gold; use a brush or gold pen, allow to dry, and kiln fire.

Easily add real gold to your lampworked or kilnformed art glass with the Ferro Gold Pen. Many glass artists use these pens to accent or sign their art glass creations. Can be fired on, or between, layers of glass (1050–1150°F).

Ferro Gold Pen

Item # FUS FGP

A

Hake Brush

A B

Tools


by Peter McGrain for maximum flexibility and control.



TOO

LS & ACCESSORIES

Don't let your paints dry out! Easily mix & store them with this plastic palette & storage cup set from Colors for Earth.

Item # Size # Pods

CE PK12 8 x 6" 12

Clear, durable polystyrene wide mouth jars with lined lids. Great for storing frits, enamels, beads or anything else. Available in 2" dia. 4 oz. jar, or 3.25" dia. 8 oz. jar.

BA

ID Item # Size

A PS CJ4 4 oz.

B PS CJ8 8 oz.

Applicator BottlePlastic squeeze bottle with nozzle tip. Great for glues, paints or Liq-uid Stringer Medium.Trim nozzle for a larger opening.

Item # Size

FUS AB4 4 oz.

Applicator Bottle with TipPlastic squeeze bottle with precision metal applicator tip runs thin, precise glue lines. Includes tip cleaner.

Item # Size

FUS AB2 2 oz.

Glass Tattoo Applicator BottlesConveniently store your Glass Tattoo Goo mixtures in these 8 plastic sqeeze bottles. Pair the bottles with the Wardell Bottle Caddy (Item# WGT BC8) for an efficient workspace.

Item # Description

WGT SB8 8 pk.

Glass Tattoo Bottle CaddyKeep your Glass Tattoo Goo mixtures at the ready without all that tapping and shaking to get the color from the bottle! The 8 small

Item # Description

WGT BC8 8 holes

holes of the caddy conveniently store 8 inverted bottles of Glass Tattoo Goo so that the color remains in the tip between uses. This caddy is meant for use with Wardell's Glass Tattoo applicator bottles (Item# WGT SB8).

A cerium impregnated hand pad for final polish. Apply a small amount of water to your piece and finish. The final stage for use with 3M diamond hand pads.

Item # Size

3M CHP 2.25 x 4"

Item # Color Grit

3M HPB Black Coarse 120

3M HPR Red Medium 200

3M HPY Yellow Fine 400

3M HPW White Extra Fine 800

High-quality 3M dia-mond hand pads are for smoothing large pieces or hard to reach glass surfaces. Four grits.

Tools, Accessories, & Aids

Short-wave UV protec-tive glasses for use with Tinscope FUS UVL.

Item # FUS UVG

A convenient and money- saving device that tests the compatibility of glass.

Item # FUS FTC

Detect the "tin side" of float glass with a Short-wave UV Tin-scope. In a dark room, shine the tin scope at 45° to glass–the tin side will show a hazy cloud,

Item # FUS UVL

the non-tin side will be clear.

A blunt tool with a flexible steel blade used for mixing and applying paints.

Item # PMG PKS

Tools

Diamond Abrasive Pad

Cerium Hand Pad

Fuse-It Test Card

Clear Jars

UV Glasses for Short Wave

Palette Knife

Palette Kit

UV Light - Tin Detector

Item # Size

SIL SLL 3.25" Dia. (80 mm)

SIL SLS 2" Dia. (50 mm)

Suction lifters, for precision glass positioning, allow for placement without touching the glass edges. Also great for removing finished

pieces from the mold. Press on to create suction, pull upper lip to release.

Suction Lifters


TOO

LS &

ACC

ESSO

RIES


Glasses

Tools

12 inch terry cloth sleeve with knit wrists protect arms up to 350°F.Sold individually.

Terry Sleeve

Item # FF SLEEVE

Aluminized sleeve will protect forearms from kiln heat. Sleeve is 18" long with elastic cuff. Sold individually.

Aluminized Sleeve

Item # FUS AS18

Hot Mill gloves with nitrile block protects hands up to 600° F. With double-sided protection, they can be worn on either hand. Sold as a pair.

Hot Mill Gloves

Item # FF GLOVES

Use to safely handle hot peephole plugs or hot lid handles. These gloves are not intended for handling hot glass or shelves. Sold as a pair.

Terry Gloves

Item # FUS TG

Features latex palm coating, seamless liner, strong tear, abrasion and puncture resis-tance, rough, textured grip, polyester/cotton blend.

Glass Gloves

Same design as the regular Zetex glove but with an extra high temperature coating rated up to 2000° F for short durations. 14" long. Sold as a pair.

Zetex Plus Gloves

Item # FUS ZGPL

Features abrasion and cut-resistant nitrile foam palm coating, white, poly/nylon shell, ANSI Cut Level 1 Protection.

Nitrile Glass Glove

Item # Size

SE NG7 X-Small

SE NG8 Small

SE NG9 Medium

SE NG10 Large

SE NG11 X-Large

Protect yourself while working with these lightweight and flexible kevlar accessories.

Large Kevlar Gloves

ID Item # Size

A SE KVG L w/Finger tips

B SE KVGF L w/o Finger tips

BA

These tinted lenses filter out the infrared and ultraviolet light inside a kiln. Protect your eyes while looking in your kiln or manipulating hot glass by raking or combing.

Fusing Safety Glasses Green #3

Item # AM FUS3

Light, all-around impact protection. Snug and comfortable fit. Tight fit helps minimize slippage with full brow protec-tion. Lens blocks more than 99.9% of UV-A and

Safety Glasses

Item # Size

AM SLG S Small

AM SLG Standard

UV-B light. Scratch-resistant, hardcoated 100% polycarbonate lenses feature revolutionary, dual 9.75 base curvature viewing areas for wide, unobstructed vision. Assorted colors. Specific colors may not be requested. Order a box of 10 to receive one of each: blueberry, cherry red, cotton candy, orange, lemon yellow, lime green, grape, vanilla, mocha brown and black licorice.

Features include rug-ged & lightweight, with adjustable temples. High-impact poly-carbonate lens with molded-in sideshields, snaps out for easy re-

Safety Glasses

Item # Frame Color

AM RWB Red, White & Blue

AM BLK Black

AM BLUE Blue

placement. Scratch-resistant lens blocks more than 99.9% of UV-A and UV-B light.

Gloves

100% polycarbonate construction is impact- resistant and durable. Contoured browguard, universal bridge and wide lens. Vented sideshields minimize lens fogging.

Safety Glasses - Wrap Around

Item # AM 5880B

Item # Size

SE BGM Medium

SE BGL Large



FUSIN

G DECALS & IN

CLUSIO

NS

Glass Accent Decals– Low-Fire – 22k Gold (4 in. Square)These 22k gold, low-fire, ultra luster decals are the perfect accent to your fused glass piece. These decals are easy to apply and fire best at 1140°F.

Low-Fire – 22k Gold

Item # DM GABF

Butterflies

Item # DM GACHA

Characters

Item # DM GACRN

Corners

Item # DM GACRS

Christian

Item # DM GADF

Dragon Flies

Item # DM GAFA

Faeries

Item # DM GAFE

Feathers

Item # DM GAFL1

Flowers 1

Item # DM GAJD

Judaica

Item # DM GALE

Leopard

Item # DM GASC

Sea Critters

Item # DM GASMP1

Sampler

Item # DM GATR

Trees

Item # DM GAZE

Zebra

Decals


FUSI

NG

DEC

ALS

& IN

CLU

SIO

NS


Decals

Item # Color

DM GASNF Gold

Glass Accent Decals– Hi-Fire Decal Magic (4 in. Square)Hi-Lights from Decal Magic are available in multiple patterns and come in black, gold, white and platinum. These decals fire best between 1350-1425°F.

Item # Color

DM HF101B Black

DM HF101G Gold

Item # Color

DM HF41B Black

DM HF41G Gold

Hi-Fire Decals

Item # Color

DM HF73G Gold

Item # Color

DM HF85G Gold

Item # Color

DM HF89B Black

DM HF89G Gold

Item # Color

DM HFDB B Black

DM HFDB G Gold

DM HFDB W White

Item # Color

DM HFDF B Black

DM HFDF G Gold

DM HFDF W White

Item # Color

DM HFHA B Black

DM HFHA G Gold

DM HFHA W White

Item # Color

DM HFIV B Black

DM HFIV G Gold

DM HFIV W White

Item # Color

DM HFJI B Black

DM HFJI G Gold

DM HFJI W White

Item # Color

DM HFLO B Black

DM HFLO G Gold

DM HFLO W White

Item # Color

DM HFMA B Black

DM HFMA G Gold

DM HFMA W White

Item # Color

DM HFMG B Black

DM HFMG G Gold

DM HFMG W White

Item # Color

DM HFSD B Black

DM HFSD G Gold

DM HFSD W White

Item # Color

DM HFSPK B Black

DM HFSPK G Gold

DM HFSPK W White

Item # Color

DM HFSS B Black

DM HFSS G Gold

Item # Color

DM HFWA B Black

DM HFWA G Gold

DM HFWA W White

Snowflake Fish Cheese Cloth

Curls Hearts

Doodle Bug

Starry Night

Doodle Fish Hands

Ivy Jimmies Loopy

Maze Mardi Gras Splash Dance

Spark Sugar Skull Wavey

Item # Color

DM HF55B Black

DM HF55G Gold

Squiggle



FUSIN

G DECALS & IN

CLUSIO

NS

Decal Magic Enamel Silhouette (4 in. Square)

These black enamel formula decals come in a variety of images and are sure to add an additional level of interest to your artwork. The Silhouettes fire best between 1350-1425°F.

Magic Enamel Silhouette

Fusing Decals

Fuse your way to creativity with the expressive decal designs of Fuse Art. Fuse Art Decals are high-fire decal especially designed to work with Microwave Kilns. Fire at 1200°F and under. 2 x 7" sheets.

Floral12 colorful flowers: mums, tulips, roses, iris, asters and more.4 word art: imagine, hope, dream and love.

Item # DTI FW867

ContempoThree 2 x 2" decals of artistic and original designs. Decals may be cut into quarters to create smaller sizes.

Item # DTI FW868

ModThree 2 x 2" decals of artistic and original designs Decals may be cut into quarters to create smaller sizes.

Item # DTI FW869

Bug-a-Boo17 curious little bugs: moths, butterflies, fireflies, bumble bees and dragonflies. Decal sizes range from .375 to 1.5".

Item # DTI FW870

Item # DM SA1

Alphabet 1

Item # DM SA2

Alphabet 2

Item # DM SAG

Angels

Item # DM SBD

Birds

Item # DM SCA

Cats

Item # DM SCH

Characters

Item # DM SDO

Dogs

Item # DM SHR

Horses

Item # DM SSC

Scenes

Item # DM STR

Trees

Enamel Dichroic Mica Decal - Satin Shimmers ( 4 x 4 in.)This rich array of satin-like lusters is an entirely new look for creative endeavors. There's now even more possibilities for creativity with these dichroic mica decals. Satin Shimmers are available in both Black-backed and Translucent versions. Firing range is 1250-1450°F.

Decals

Decals

Item # Descrip.

DM MBC Copper

DM MBG Gold

DM MBI Iris

DM MBL Lilac

DM MBM Mint

DM MBR Rose

DM MBS Silver

Item # Descrip.

DM MTC Copper

DM MTG Gold

DM MTI Iris

DM MTL Lilac

DM MTM Mint

DM MTMC Mint Chocolate

DM MTR Rose

DM MTS Silver

Black Backing Translucent


FUSI

NG

DEC

ALS

& IN

CLU

SIO

NS


Dicro Slide – 3.25 x 8" SheetDicro Slide is very easy to use and produces amazing effects! It can be fired between layers or on top of glass. Dicro Slide is compatible with any COE and comes in a wide variety of colors and patterns. This product can be easily cut to shape with scissors, an hobby knife or even paper punches! Achieve those intricate cuts you have always wanted to do with glass but just could not! Fire at normal fusing temperatures.

ID Item # Color

A FUS DSBG Blue Gold

B FUS DSMG Magenta Green

ID Item # Color

E FUS DSHCC High Cyan Copper

F FUS DSCR Clear Red

Decals

Decals & Transfer Paper

ID Item # Color

A FUS DSPGP Green/Pink

B FUS DSPRS Red/Silver

C FUS DSPLGM Lt. Green/Magenta

D E FA B C

Item # Color

FUS DSCBC Cool

FUS DSCBW Warm

CobbleItem # Color

FUS DSDIC Cool

FUS DSDIW Warm

Diamond

Item # Color

FUS DSDTC Cool

FUS DSDTW Warm

Dots

Item # Color

FUS DSWIC Cool

FUS DSWIW Warm

Wings

Item # Color

FUS DSTLC Cool

FUS DSTLW Warm

Tiles

Item # Color

FUS DSSQC Cool

FUS DSSQW Warm

Square

ID Item # Color

C FUS DSRBW Rainbow

D FUS DSCC Cyan Copper

Premium Fusing Decals

Turn any picture into a memorable piece of glass art using this high-quality water-slide fusing photo paper.Just print your photo-graph or other artwork

Item # Sheet Size Qty.

FUS PFP 8.5 x 11" 10 pk.

on Photo Fuse paper using a laser printer that uses carbon-based toner. (Black-printing printers only, not ink jets or color laser printers.) Then soak the paper in water, slide the resulting decal onto your glass, let it dry, and fire.

For Photo Resist Washout Bundlesee page 34.

Transfer PaperPhoto Fuse Paper

A key tool for the expos-ing process of creating a photomask. This high quality print film is used in a monochrome laser printers for black and white vector artwork.


PHS LF5 8.5 x 14" 5 pk.

Durable enough to work well with repeat transfers. Ideal for fine masks when used with PHS SR35.

Laser Transfer Film

Rayzist SR3000 Photo Resist Film – add that final touch to your artwork use 3 mil photo resist film, ideal for fine detailed artwork and halftone photos.


PHS SR35 8.5 x 14" 5 pk.

Photo Resist – 3mil Film

A B

C

Photo Sensitive Resist



FUSIN

G DECALS & IN

CLUSIO

NS

10.25 in. Sheets - 15 Colors AssortmentIncludes: Aqua, Canary, Caribbe-an, Coral, Cranberry, Evergreen, Flamingo, Graphite, Honey, Iris, Jade, Pewter, Sapphire, Tangerine, and Walnut.

Glassline PaperGlassline Paper is a fusible colored paper that is designed to be fired between layers of glass. It may be used with glass of any coefficient (COE). Glassline Paper is easy to cut with scissors, or a razor knife or simply tear to achieve a ragged edge. Intricate designs are easy to achieve with this product.

Inclusion Paper

Item # Pattern

FUS GP50P Plain

FUS GP50C Crinkle

FUS GP50S Splatter

5 in. Sheets – 5 Color Assortments & TexturesFive colors in three styles: Plain, Splatter and Crinkle textures –15 sheets.

ID Item # Description Colors

A FUS GP52 ASMT 1 Caribbean, Evergreen, Iris, Jade & Sapphire

B FUS GP53 ASMT 2 Canary, Coral, Cranberry, Flamingo & Tangerine

C FUS GP54 ASMT 3 Aqua, Graphite, Honey, Pewter & Walnut

Brass and Copper foil for inclusion between fused glass layers or with soldered glass art. Cut with scissors or use shaped punches for designs.

Item # Description Guage Size

FUS B36 Brass 36 12 x 30"

FUS C36 Copper 36 12 x 30"

A B C

Inclusion Paper, Foil & High-Temp Wire

Thickness: 4.0 - 8.0 microns (approximate)Weight: 52 grams/sheet


FUS SFOIL 9.5 x 9.5" 2 pk.

23 Karat Gold Foil for fusing applications. Pack consists of 10 3.25" Square sheets. Approximately 4.0 - 8.0 microns thick.


FUS GFOIL 3.25 x 3.25" 10 pk.

Dichroic coated copper foil made by CBS does not require pre-heating and is non COE specific. Sold by the sheet.Copper foil can be fused between two layers of glass. Dichroic coated copper foil is

Item # Size

DI DFS 6 x 12"

less vulnerable to 'burn-out' than other coating. Three times as thick as regular dichroic coatings.Beautiful silver color with various rainbow hues.

Remains strong in extreme heat; great for fused glass jewelry and suncatchers. Fuse between layers for loops, connectors, or hangers.

Item # Gauge Length

FUS HTW17 17 10'

FUS HTW24 24 10'

FoilBrass & Copper Foil Rolls Silver Foil Sheets

Gold Foil Sheets

Silver Rainbow Sheets

High Temperature Wire

Fusible Handy Hanger

Easily insert the Ellie or Finley Handy Hanger between two layers of glass. These hangers are designed to hang your smaller fused glass pieces weighing up to 5 pounds. They can withstand heat up to 2000°and can be fired multiple times. Allow the kiln to cool to 100° before removing the piece with the inserted hanger(s). Made of high temperature nickel chromium. Machined tooled.Sold in packs of 16.

ID Item #

A HH FEL

B HH FFI

BA

Fusible Hangers


FUSI

NG

DEC

ALS

& IN

CLU

SIO

NS


Item # COE

DF 90 BFLY 90

DF 96 BFLY 96

Butterfly 1 x 1.25"

Item # COE

DF 90 BOOT 90

DF 96 BOOT 96

Boot 1.5 x 1.5"

Fused Glass ShapesThese beautiful two-to-three layer fused glass shapes make awesome accessories! Shapes are fusible--tack fuse to other fused pieces for instant design. Glue on a bail for a quick pendant, wire wrap as a charm for wineglasses or key-ring, glue to metal picture frames or wine stoppers.

Item # COE

DF 90 CIRCLE 90

DF 96 CIRCLE 96

Item # COE

DF 90 CROSS 90

DF 96 CROSS 96

Circle 1.5"

Cross 1.25 x 1"

Item # COE

DF 90 DRAGN FLY 90

DF 96 DRAGN FLY 96

Item # COE

DF 90 ELE 90

DF 96 ELE 96

Dragonfly 1.5 x 2"

Elephant 1.875 x 1.25"

Item # COE

DF 90 FLEUR 90

DF 96 FLEUR 96

Item # COE

DF 90 GCROSS 90

DF 96 GCROSS 96

Fleur de Lis 1.25 x 1.25"

Gothic Cross 1.5 x 1"

Item # COE

DF 90 GIRA 90

DF 96 GIRA 96

Item # COE

DF 90 GUITAR 90

DF 96 GUITAR 96

Giraffe 1.875 x 1.375"

Guitar 2 x .75"

Item # COE

DF 90 HEART 90

DF 96 HEART 96

Item # COE

DF 90 HOOK 90

DF 96 HOOK 96

Item # COE

DF 90 BEAR 90

DF 96 BEAR 96

Bear 1.25 x .75"

Item # COE

DF 90 CACT 90

DF 96 CACT 96

Cactus 1.25 x .75"

Item # COE

DF 90 DBONE 90

DF 96 DBONE 96

Dog Bone 1 x 1.25"

Item # COE

DF 90 FAIRY 90

DF 96 FAIRY 96

Fairy 2 x 1"

Item # COE

DF 90 GECKO 90

DF 96 GECKO 96

Gecko 1.75 x 1.25"

Item # COE

DF 90 HAND 90

DF 96 HAND 96

Hand 1.5 x 1.25"

Heart 1.25 x 1.25"

Hook 1.5 x .75"

Item # COE

DF 90 HORSE 90

DF 96 HORSE 96

Item # COE

DF 90 HSHOE 90

DF 96 HSHOE 96

Item # COE

DF 90 HUMB 90

DF 96 HUMB 96

Horse 1.5 x 1.5"

Horse Shoe 1 x 1"

Hummingbird 1.5 x 1.5"

Fused Glass Shapes



FUSIN

G DECALS & IN

CLUSIO

NS

Fused Glass Shapes

Item # COE

DF 90 KOKO 90

DF 96 KOKO 96

Kokopelli 1.75 x 1.25"

Item # COE

DF 90 LION 90

DF 96 LION 96

Lion 1.5 x 1.5"

Item # COE

DF 90 MARTINI 90

DF 96 MARTINI 96

Item # COE

DF 90 MNKY 90

DF 96 MNKY 96

Martini 1.75 x 1"

Monkey 1.875 x 1.5"

Item # COE

DF 90 OAK 90

DF 96 OAK 96

Item # COE

DF 90 OCC 90

DF 96 OCC 96

Oak 1.5 x 1"

Off Center Circle 1.25"

Item # COE

DF 90 OPENHEART 90

DF 96 OPENHEART 96

Item # COE

DF 90 OPHSM 90

DF 96 OPHRTSM 96

Open Heart 1.75 x 1.25"

Open Heart Small 1 x .75"

Item # COE

DF 90 PENG 90

DF 96 PENG 96

Item # COE

DF 90 PLMRA 90

DF 96 PLMRA 96

Penguin 1.5 x 1"

Plumeria 1.25 x 1.25"

Item # COE

DF 90 SCDOG 90

DF 96 SCDOG 96

Item # COE

DF 90 SEAHORSE 90

DF 96 SEAHORSE 96

Item # COE

DF 90 KEY 90

DF 96 KEY 96

Key 1.75 x .75"

Item # COE

DF 90 MAPLE 90

DF 96 MAPLE 96

Maple Leaf 1.25 x 1.25"

Item # COE

DF 90 MSE 90

DF 96 MSE 96

Moose 1.5 x 1.25"

Item # COE

DF 90 OCTOPUS 90

DF 96 OCTOPUS 96

Octopus 1.5 x 1.5"

Item # COE

DF 90 PALMT 90

DF 96 PALMT 96

Palm Tree 1.5 x 1"

Item # COE

DF 90 PUZZLE 90

DF 96 PUZZLE 96

Puzzle 1 x 1.25"

Scottie Dog 1.25 x 1.25"

Seahorse 1.75 x .75"

Item # COE

DF 90 TRAP 90

DF 96 TRAP 96

Item # COE

DF 90 UNCN 90

DF 96 UNCN 96

Item # COE

DF 90 WIBOT 90

DF 96 WIBOT 96

Trapezoid 2 x 1"

Unicorn 1.25 x 1.5"

Wine Bottle 2-1/4 x 1/2"

Item # COE

DF 90 WINE 90

DF 96 WINE 96

Wine Glass 1.5 x .75"

Fused Glass Shapes


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Jewelry Bails

Jewelry Bails

ID Item # Finish Size

A AAN GJHB S Gold Small

A AAN GJHB M Gold Medium

A AAN GJHB L Gold Large

B AAN SJHB S Silver Small

B AAN SJHB M Silver Medium

B AAN SJHB L Silver Large

Heart Bails

Double Heart Bails

Small: 16 x 9 mm; Medium – 20 x 11 mm;Large: 23 x 13.5 mm. Sold in packs of 25.

23.6 H x 11 mm W Sold in packs of 25.


A AAN SCB S Single

B AAN SDC M Double

Celtic Bails

A - Single: 16.6 mm H x 9.7 mm W; B - Double: 25 mm H x 12.7 mm W. Sold in packs of 25.

A B

Item # Finish Size

AAN SJB S Silver Small

AAN SJB M Silver Medium

AAN SJB L Silver Large

Jewelry BailsBail size: Small – 6 x 15 mmMedium – 8 x 21 mm Large – 10 x 25 mmSold in packs of 25.

BA


A AAN STHA L Hashmark

B AAN STHE L Hexagon

C AAN STL L Leaves

D AAN STT L Tortoise

E AAN STW L Waves

F AAN STA L Assorted - 2 patterns ea.

Pattern Bails

Add style to your pendant art with Aanraku style patterned bails. Upper part of bail is textured with one of five distinct patterns.Bail size: 25 mm H x 7 mm W. Sold in packs of 10.

BA

DC

FE


A AAN SFB S Single

B AAN SDF M Double

Fish Bails

A - Single: 21.6 mm H x 5.8 mm W; B - Double: 25.8 mm H x 6.6 mm W. Sold in packs of 25.

B Double Leaf Bails21.9 H x 7.7 mm W Sold in packs of 25.

A

17.6 H x 9.7 mm W Sold in packs of 25.

Paw Bails

Item # AAN SDH MItem # AAN SDL M

Item # AAN SPB S

Sterling Silver Round Bail

Item # Size

AAN STERJB S Small - 6 x 15 mm

AAN STERJB L Large - 10 x 25 mm

High quality Aanraku jewelry bails display your glass art beautiful-ly. 925 Sterling Silver.Sold individually.

Assorted Large Tube Top

Item # Finish Qty.

JF TT03 Sterling Silver 9 pk.

Three different styles of sterling silver plated tube top bails. Hammered, spiral and smooth, 3 each. Bail size: 21 mm H x 11 mm W. Sold in packs of 9.



BAILS, FIND

INGS & D

ISPLAYS


A AAN GEHB S Gold Small

B AAN SEHB S Silver Small

Heart Earrings Bails

Small - 9 x 13 mm.Sold in packs of 24 (12 pairs).

A B

Jewelry Bails

ID Item # Finish

A JF CB01 Antique Copper

B JF CB02 Antique Silver

C JF CB03 Antique Brass

Variety Bail Packs

Variety pack contains one each of five style bails.Sold in packs of 5.

BA

C

ID Item # Finish

A JF VAF01 Antique Silver

B JF VAF02 Antique Copper

C JF VAF03 Antique Brass

Flower Bail Variety Packs

Roses, lilies and daffodils adorn the outward facing portion of the tube. Bail size: 30 mm H x 11 mm W.Sold in packs of 12.

BA

C

ID Item # Finish

A JF VF01 Silver

B JF VF03 Hematite

C JF VF04 Gold

D JF VF02 Antique Floral Variety Pk

Floral Bails

Floral designs etched into the front and back. Bail size: 24 mm H x 4 mm W.The variety pack includes 8 antique copper, 8 antique silver and 8 antique gold.Sold in packs of 24.

BA

C D

Jewelry Bails

Filigree Bails

ID Item # Finish

A JF BL007 Silver

B JF BL008 Gold

Bail size: 35.2 mm H x 9 mm W. Sold in packs of 1.

Smooth Bail Variety PacksFive colors of smooth bails are included in this variety pack. Silver, gold, hematite, antique copper and antique brass are included. 4 of each

finish. Bail size: 24 mm H x 3 mm W. Sold in packs of 20.

Item # JF BLS001

BA


A AAN GJB S Gold Small

A AAN GJB M Gold Medium

A AAN GJB L Gold Large

B AAN JB S Nickel Small

B AAN JB L Nickel Large

Jewelry Bails Small - 6 x 15 mm; Medium – 8 x 21 mm; Large – 10 x 25 mm. Sold in packs of 25.

BA


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Jewelry Bails

Jewelry Bails

ID Item # Finish

A JF TT01 Silver

B JF TT02 Gold

C JF TT05 Antique Copper

Assorted Tube Top Bails

Plated in 3 styles:4 smooth, 3 spiral, 3 texture.Bail approx. size: 19 mm H x 8 mm W. Sold in packs of 10.

BA

C

ID Item # Description SizeH x W

A JF BL02 Moroccan 31.5 x 10 mm

B JF BL03 Heart 30 x 8 mm

C JF BL04 Thatch 28 x 9 mm

D JF BL05 Studded 26 x 9 mm

E JF BL07 Fluted 27.2 x 9 mm

F JF BL005 Smooth 28.5 x 9 mm

Bails

Sold in packs of 5.

BA

DC

E

DC

ID SilverItem #

GoldItem # Description

A JF BL010 JF BLG010 Infinity

B JF BL011 JF BLG011 Thatch

C JF BL012 JF BLG012 Fluted

D JF BL014* - Variety pk.

*Variety Pack includes: 3 Fluted, 3 Infinity & 2 Thatch.

Gluing area: 10 mm H x 5.5 mm W. Overall bail size: 25.5 mm H x 5.5 mm W.Sold in packs of 8.

BA

Small Bails

F

E-6000 Clear Adhesive

E6000 is an exceptional glue for almost any surface. The E6000 adhesive is ideal for jewelry or mosaic applications. Flexible, viscous styrene-based adhesive adheres glass to wood, masonry, tile, plastics, fiberglass, metal find-ings, glass and more. Surface should be clean, dry and free of dirt. For best results, roughen surface before use. E6000 is a tough, flexible and highly versatile rubber-based compound that can withstand temperature between -40 degrees and up to 150 degrees. E6000 will become tacky within 2

Product Additions

Item # Description

ECL E618 0.18 oz.

ECL E62 2 oz. w/applicator tip

ECL E60003.7 3.7 oz

minutes and begin setting in approximately 10 minutes. Full cure takes between 24 - 72 hours. For clean up use small amounts of acetone or any citrus-based solvent. Use in a well ventilated area. Tensile strength is 3500 lbs.

Additional adhesives can be found on page. 63



BAILS, FIND

INGS & D

ISPLAYS

Earring Bails


A JA E10C* Copper 10 mm

B JA E10S Silver 10 mm

B JA E15S Silver 15 mm*Solid copper.

Disc Earrings

Sold 1 pair per pack.

BA

ID Item # Description Finish

A JA EPT Teardrop Silver

B JA EPC Circle Silver

Earring/Pendant

These attractive earring/pendant findings can be worn as earrings or pendants. Includes two rings to easily convert to pendants. Silver plated brass, made in Mexico. Size: .083" w/ 8 mm glue pad.Sold 1 pair per pack.

BA


A JA EI10 Silver 10 mm

B JA EI15 Silver 15 mm

Wire Infinity

Silver plated brass, made in Mexico.Sold in packs of 10.

BA

French Hooks w/Disc & Clutch High quality, sil-ver-plated jewelry bails and components display your glass art beautifully.Sold in packs of 5 pairs.

Item # Finish

JF ER02 Silver

Item # Pad Size Finish

JA ET8 8 mm Silver

Earring TeardropSilver plated brass, made in Mexico.Sold 1 pair per pack.

Item # Pad Size Finish

JA EPC2 15 mm Silver

Earring/PendantEasily turn these fun earrings into pendants by swapping out the earring hooks with the simple, circular bails provided. Circle earring diameter: Approx. 4 cmSold 1 pair per pack.

Item # Finish

JF GD01 Silver

Glue DiscSterling silver plated. Glue discs are 8 mm in diameter.Sold in packs of 20.

ID Item # Finish

A AAN SEB S Silver

B AAN GEB S Gold

Small Earring Bails

Sold in packs of 24 (12 pairs).BA

ID Item # Size Finish

A JS DR49 Y 4 x 9 mm Gold tone

B JS DR49 4 x 9 mm White/Silver

Drop Loop 4 x 9 mm

JS DR49 Y: Use with Gold-filled French Hook (JS FHE G).JS DR49: Use with Sterling Silver French Hook (JS FHE). Sold in packs of 144.

BA

Jewelry Bails


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Earring Essentials

Earring Essentials

Flat Pad

Sterling 6 mm earring post. Sold in packs of 24.

Item # JS FPS

French Hook

Sterling silver with sil-ver plated brass bead and anti-tarnish finish. 22 gauge wire.Sold in Packs of 24.

ID Item # Description Guage

A JS FHE Sterling Silver 23

B JS FHE G 14 Kt. Gold filled 22

Economy version.Sold in packs of 24 (12 pairs).

Earring Bails High quality sterling silver drop discs for beautiful finished ear-rings. Disc measures 5 mm in diameter. Sold in packs of 25.

Item # JS SSEB

Butterfly Nut

Sterling butterfly nut. Fits Stan-dard posts, including the Flat Pad Sterling Post (JS FPS). Sold in packs of 48.

Item # JS BNS

Surgical stainless steel, white plated for a silver finish. 4 mm loop and are 22 gauge.Sold in packs of 144.

Item # JS FHSUS

Item # JS FHB

Product Additions

Item # JS FWK

French Wire Keeper

Holds French hook ear wires in place for display or wear. Clear rubber.Sold in packs of 144.

Item # Finish

JF ER01 Silver

Earring Stud with Clutch

High quality, silver-plated jewelry bails and components display your glass art beautifully.Sold in packs of 5 pairs.

Sterling Silver Essentials Sterling Silver & Gold French Hooks

Surgical Steel French Hooks

BA



BAILS, FIND

INGS & D

ISPLAYS

Pendants


AAN PPS Small .875 x .75"

AAN PPL Large 1.25 x 1.5"

Stainless Steel.Sold in packs of 10.

ID Item # Description Glass Cavity Viewable Opening

A AFL GPSC Circle 1 x 1 x .25" x 6 mm Deep .875"

B AFL GPSSS Square 1 x 1 x .793" x 6 mm Deep .875 x .875"

C AFL GPSR Rectangle 1 x 1.5 x .25" x 6 mm Deep .875 x 1.25"

C AFL GPSSR Rectangle 1 x 1.5 x .25" x 8 mm Deep .875 x 1.25"

D AFL GPSO Oval 1 x 1.5 x .25" x 6 mm Deep .875 x 1.25"

The Gallery Pendant is an open topped frame bail that allows you to interchange your fused glass in seconds! Insert your glass art, attach a cord or chain, and you are done - the sterling silver-plat-ed face provides a elegant border for your work. The 1.8 mm holes in the bottom of the pendant frame allow you to string beads with a standard size head pin.

BA

Silver Gallery Pendant

Pendant Plate

DC

Welled, silver plated brass, made in Mexico.

Pendant Circles / Squares

ID Item # Type Size

A JA PWC1 Circle 1"

A JA PWC15 Circle 1.5"

B JA PWS1 Square 1"

B JA PWS15 Square 1.5"

BA

Item # Size

JA PC114 1.25"

Flat Circle PendantSilver plated brass, made in Mexico.

2" Headpin – Plated

21 gauge silver-plated head pins display glass beads on the bottom of the Gallery Pendant perfectly. Up to 3 head pins fit each pendant and after being placed, beads can then be slid onto the pins. To secure glass beads to the rest of the jewelry piece, crimp the ends of the head pins.Sold in packs of 100.

Item # JS HP212

Pendants

Product Additions


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Sterling Silver Chains

Item # Size

SCS 16 125 16" x 1.25 mm

SCS 16 175 16" x 1.75 mm

SCS 18 125 18" x 1.25 mm

SCS 18 175 18" x 1.75 mm

SCS 20 125 20" x 1.25 mm

Snake Chain w/ClaspSilver chains are coated with an anti-tarnish coating. The anti-tarnish coat-ing puts a barrier on the silver to extend the product's shelf life. This process is intended to prolong the shiny look of the chain for the retailer. While the coating will extend shelf life (2 to 3 times as long), it does not guarantee that the silver will not eventually tarnish from consumer use. The coating is non-toxic and hypoallergenic.Most chains are imported from Italy.

Neckwire & Chokers

Neckwire – 18" Silver tone 18" neckwire with attached closure. Hang bails or hollow pendants.Sold in packs of 5.

Item # AAN NWS

Choker

Chokers may be worn plain, with a pendant finding, or with cabochons glued directly on. 'Designer Collection'. High quality, handcrafted bails and findings display your work beautifully and add value to your jewelry offerings. Silver plated brass, made in Mexico.

ID Item # Type

A JA CSC Single Curl

B JA CSWC Swirl & Curl

C JA CPW PlainBA

Stainless Steel Chains

Item # Size

AAN SSMS 18" x 2.2 mm

Small Mesh Links Flat Rectangle Links Box Links

High-quality stainless steel chains feature nickel-free silver-plated clasps with 2 inch extender chains.

Item # Size

AAN SSFR 18" x 2.4 mm

Item # Size

AAN SSBC 18" x 1.9 mm

Snake Chain w/ClaspTrue Italian Sterling Silver Snake Chain. Chain is 3 mm with a lobster clasp and panceta end cap. Panceta (end cap) is 4 mm and requires a 4 mm bead hole or larger.

Item # Size

SCS 3 16 16" x 3 mm

Item # Size

SCS 20 175 20" x 1.75 mm

SCS 22 175 22" x 1.75 mm

SCS 24 125 24" x 1.25 mm

SCS 24 175 24" x 1.75 mm

Chains

C



BAILS, FIND

INGS & D

ISPLAYSChains & Cords

SingleItem #

10 PackItem # Length

JS LC16 JS LC16 TEN 16"




Leather Cords – BlackLeather cord with high-quality Sterling Silver clasp.*10 Pack shown.

Item # Color Length

JS LC16BR Brown-Red 16"

JS LC16DB Dark Brown 16"

JS LC16LB Light Brown 16"

JS LC16P Purple 16"

JS LC16T Tan 16"

Leather CordsLeather cord with high-quality Sterling Silver clasp.Sold as single/each.

Item # Length Pack

JF BC18 18" 10 pk.

JF BC20 20" 10 pk.

Satin Cords – BlackBlack satin cords with 12 mm silver plated lobster clasp.

Cords

Leather Cords – Variety PackThree different color cords included: 4 black, 3 brown and 3 tan; each feature 3" extenders.Sold in packs of 10.

Item # Length

AAN LC16 16"

AAN LC18 18"

AAN LC20 20"

Leather Cords – BlackHigh-quality leather cords feature nickel-free silver-plated clasps with two-inch extender chains.Sold in packs of 10.

Rings

Item # Size

JA RD6 6.5

JA RD7 7.5

Ring Flat 15 Designer Collection.Silver plated brass, made in Mexico.

ID Item # Finish

A JF RG04 Silver

B JF RG05 Hematite

C JF RG06 Antique Copper

Adjustable Filigree Rings

Designer Collection. Silver plated brass, made in Mexico. Sold in packs of 10.

B

A

ID Item # Finish

A JF RS01 Silver

B JF RG03 Hematite

Ring Assortment

Five per pack; 1 size 6, 2 size 7 & 2 size 8.Flat gluing surface is approx. a 10 mm square.

BA

C

Adjustable RingSterling Silver plated.Large 25 mm cup.

Item # AE RG03

ID Item # Finish

A JS RSA Sterling Silver

B JS RGPA 18k Gold plated

Adjustable Ring

Ring band adjusts from size 3—10, 7 mm pad.

BA

Item # Length

JF LC01 18"


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Jewelry Sets

Simple Necklace

Snap & Switch Simple Necklace. Chain mea-sures 19.5" long with a 3" length of adjustable chain. One flat disc included.

This exciting line from Aanraku Studios allows you to change out your cabochon from one piece of jewelry to the next! The 19 mm discs allow you to snap your pendants into place with ease.

Back

Item # Type

AAN P01 Simple

Scrolled Necklace

Snap & Switch Necklace. Chain measures 19.5" long with a 3" length of adjustable chain. One flat disc included.

Back

Item # Type

AAN P02 Scrolled

Necklace with One Disc

Snap & Switch Necklace. Chain measures 18.5" long with a 3" length of adjustable chain. One flat disc included.

ID Item # Type

A AAN P13 Necklace and disc

B AAN P11 Disc only

Create beautiful cab-ochons to adorn each of these five 19 mm discs. Switch them out between rings, earrings, necklaces, and bracelets! Sold in packs of 5.

Flat Snap Discs

Item # AAN P03


A AAN P08 1 Disc

B AAN P09 3 Disc

Snap & Switch Bracelet

Create a versatile piece of jewelry with this cabochon snap & switch bracelet. Flat, 19 mm discs included.

BA

One flat disc included. Ring size can be adjust-ed to fit sizes 5 to 9.

Ring with One Disc

Item # AAN P10

BA

Two flat discs includ-ed. Earrings measure approximately 19 mm in diameter; 30 mm including exposed lever back.

Hoop Earrings

Item # AAN P12

Three flat discs includ-ed. Bracelet measures 9.25" length.

Mesh Bracelet

Item # AAN P14

Jewelry Bails

Bar Pins & Brooches

Item # Size

AAN DLBB 1.25"

Double Bar Bail

Sold in packs of 5. Create beautiful pins with this magnetic brooch backing. Mea-sures 1.75".Sold individually.

Magnetic Brooch

Item # AAN BM2

Bar Pin

Item # Size

JS BP34 .75"

High quality nickel silver-tone bar pins. Precision-made, secure catch. Sold in packs of 25.

Snap & Switch Sets



BAILS, FIND

INGS & D

ISPLAYS

Bracelets

Cup Linked Bracelet

Finished with a high-quality lobster clasp and measures 7.5" long. High quality, silver plated.

ID Item #Pad

FinishQty Dim.

A AE BR13 1 18 x 13 mm Silver

B AE BR14 3 12 mm Silver

BA

Bracelet with Round Blanks

Plated steel round blank bracelet. Length includes fold-over clasp.Sold in packs of 6.

ID Item # Finish DiscQty / Size

LoopsQty / Size Length

A BCR WS6 White/Silver Tone 13 / 9 mm 14 / 9 mm 8.25"

B BCR SP6 Silver 11 / 9 mm 12 / 9 mm 7.25"

C BCR GP6 Gold 13 / 9 mm 14 / 9 mm 8.25"

D BCR GM6 Gunmetal* 11 / 9 mm 12 / 9 mm 7.25"* Black gunmetal color may range from gun blue to matte dark gray to shiny black metal.

BA C

ID Item # Pad Pad Dim.

A JA BLC Circle 24 mm

B JA BLS Square 22 mm

Silver Link Bracelet

Designer Collection. Silver plated brass, made in Mexico. 8.5" long.

ID Item #Pad Dim.

FinishCenter Outer

A JA BCC* 1.5 cm 1 cm Copper

B JA BCS 1.5 cm 1 cm Silver*Solid copper.

Cuff Bracelet, 3 Pads

This elegant three-pad bracelet is adjustable to fit most wrists.

BA

Item # Pad Dim. Finish

JF BR02 13 mm Silver-tone

Adjustable Cuff BraceletCreate a bracelet that suits your style with this adjustable cuff bracelet.Size: 5 mm dia. bracelet cuff, braided style.

D

Item # Finish

JF BR01 Silver

Bracelet Size: 7.5" L x 10 mm W.

Oval Link Bracelet

Textured square plates provide the perfect finding for smaller pieces of fused glass. Each finding is connected with an oval ring and a watch band clasp.

ID Item # Disc (in.)Qty / Size Finish Length

A JF BR05 6 / .375" Silver 7"

B JF BR06 6 / .375" Antique Copper

7"BA

Item # Disc (mm)Qty / Size

Loop (mm)Qty / Size Length

BCO SP6 10 / 13 x 9 11 / 9.5 7.5"

*Approx. hole size: 2.1 mm

Oval Blank BraceletSilver-plated steel, oval disc-and-loop bracelet with forms for gluing. Length includes fold-over clasp.Sold in packs of 6.

Bracelets

BA


BAIL

S, F

IND

INGS

& D

ISPL

AYS


Belt Buckles

Item # Size Finish

AAN BBLR 3.25 x 2.75" Nickel

Large Rectangle Belt BuckleSimply attach your glass with epoxy or glass/metal adhesive.Insert dimensions: 3 x 2.5".

Item # Size Finish

AAN BBSR 1.125" Nickel

Round Belt BuckleThe rectangular plate will hold a circular fused or stained glass piece measuring 1.125" or less. Securely affix to your favorite belt (width of 1.125" or less) using the included small screws.

Item # Size Finish

AAN BBSS 2" W x 1.5" H Nickel

Square Belt BuckleSecurely affix to your favorite belt (width of 1.125" or less) using the included small screws. Insert dimension: 1.625" by 1.375" or less.

Product Additions

Item # AAN BRL

Reversible Leather BeltBlack and brown reversible belt measures 1.125" wide and 48" length. Able to be attached to either the nickel-plated square belt buckle (AAN BBSS) or the nickel-plated round belt buckle (AAN BBSR).

ID Item # Size Description

A AAN RBB 2.5 x 2.5" Round

B AAN OBB 2.5 x 3" Oval

Round Belt Buckle

Attach your latest fused or stained glass piece to this belt buckle for a fun and decorative twist. Nickel plated. This buckle is NOT compat-ible with AAN BRL.

ID Item # Finish Loop Size

A JS BKS1 Antiqued Silver 1"

A JS BKB1 Antiqued Brass 1"

B JS BKS15 Antiqued Silver 1.5"

B JS BKB15 Antiqued Brass 1.5"

Create your own custom glass art buckles with antiqued belt buckle blanks. Plated zinc.Approximate plate size: 25 x 45 x 2 mm.Approximate hole size: 2-3 mm.

BA

Belt Buckle

Wearables

Display your fused and stained glass art on a belt buckle! Square, round and oval designs.

BA



BAILS, FIND

INGS & D

ISPLAYS

Buttons, Zipper Pulls, Cuff Links & More!

Measure .5".Sold in packs of 5.

Button Backs

Item # AAN BB

The plates all measure 1.25 x .125". The recessed zipper pull plates feature a 1" wide insert for your glass piece. The silver finish is nickel-free.Sold in packs of 2.

Round Zipper Pull

ID Item # Description Finish

A AAN ZRRN Recessed Silver

B AAN ZRRB Recessed Black

C AAN ZRFN Flat Silver

D AAN ZRFB Flat Black

BA

DC

Plated fold over clasp.Sold in packs of 24.

Clasp Silver

Item # CHA FOCS

Two inch length with a 10 mm round pad for gluing.Sold in packs of 72.

Bobby Pins

ID Item # Finish

A JS BBPW White/Silver-tone

B JS BBPB Antique Brass

BA

Create custom art glass cuff links for the stylish person in your life.10 mm flat gluing area.Sold in packs of 4.

Cuff Links -Plated

Item # JS CLSP

Wearables

Bead Bails

Item # Length Dia.

AAN BP1 1" 2 mm

AAN BP125 1.25" 2 mm

AAN BP150 1.5" 2 mm

Bead PostsUse the silver tone Bead Post as bead hangers for use with the Aanraku 18" neckwire - or anything else you'd like to attach beads to. Sold in packs of 5.

Crimp Tubes – Sterling SilverSterling silver tube crimps are ideal for fin-ishing off your beading project. 2 x 2 mm.Sold in packs of 100.

Item # JS CB STS

Add-a-Bead Pendant Add-a-bead Pendants are a quick and easy way to create custom necklaces or charms. Sold in packs of 6.

Item # Description

BF PDTM Medium

BF PDTL Large


BAIL

S, F

IND

INGS

& D

ISPL

AYS

D&L is committed to providing the newest products in a growing industry.Giftware

Crystal Nail & Spa Files

These European made, premium quality, crystal glass nail files never wear down and look fantastic. Simply glue dichroic glass art to the handle for a beautiful & practical gift

ID Color

Item #

Small Medium InCase Spa Bars

Blue GF SB GF MB GF CSB —

Black GF SBLK GF MBLK GF CSBLK —

Green GF SG GF MG — GFB G

Harvest Gold GF SHG GF MHG — —

Lavender GF SL GF ML GF CSL —

Lime Green GF SLG GF MLG GF CSLG —

Light Purple GF SLP GF MLP — —

Purple — — GF CSP GFB PU

BA

ID Item # Description Size Pack

A GF SMAS2 Small 3-5/8 x 3/8" 6

A GF MDAS2 Medium 5-3/8" x 1/2" 6

B GF SMASS Small 3-5/8 x 3/8" 9

B GF MDASS Medium 5-3/8" x 1/2" 9

ID Color

Item #

Small Medium InCase Spa Bars

Magenta GF SM GF MM — GFB M

Mint GF SMNT GF MMNT GF CSMNT —

Orange GF SO GF MO GF CSO GFB O

Pink GF SPI GF MPI GF CSPI GFB PI

Red GF SR GF MR GF CSR —

Sky Blue GF SSB GF MSB — GFB SB

Sea Green GF SSEG GF MSEG — GFB SG

Turquoise GF ST GF MT — —

Yellow GF SY GF MY — —

Crystal Files – IndividualAll nail files sold in packs of 5. Spa bars sold individually.

Crystal Glass Spa Bars - Ready for your art! These European made, premium quality, crystal glass spa bars never wear down and look fantastic. Equipped on both sides with different filing surfaces, spa bars help keep feet smooth and soft. Easy to clean and available in seven colors. Simply glue dichroic glass art to the handle for a beautiful and practical

Glass Nail File Sets

Item # Description Size Pack

GF CSAS InCase 5" long overall 7

item. Tempered glass files are spa quality & may be sterilized with heat, autoclave, liquid and UV lighting. Frequent use reduces nail chipping and peeling. Dip in water for a flawless finish; can be used on artificial nails as well.

gift item. Tempered glass bars are spa quality and may be sterilized with heat, autoclave, liquid and UV lighting. Use with water.Spa bars measure 6.25 x 1.25 x .24 in.Sold individually.

InCase Glass Nail File

Spa Bars

These high quality, European nail files come built into a colorful and attractive carry case. Simply affix your glass art to the case with E6000 for a quick & great-selling gift item. Available in 9 colors, the InCase file measures 5" long overall, with a 2.5" file surface. The InCase Assortment Pack contains one each of the following colors; blue, black, lime green, orange, purple, pink and red.

Product Additions

Acrylic Display

Easily organize & display 24 InCase Nail Files in this Acrylic Display. Use the removable 6-3/4 inch high backdrop as a sign for prices.Acrylic Base: 5.75" D x 2.5" H x 4.5" W.

Item # GF CADC


BAILS, FIND

INGS & D

ISPLAYSD&L is committed to providing the newest products in a growing industry.

Giftware Findings

Item # Pad Size

JF PH02 1.375" Sq.

Purse Hangers Silver-tone purse hanger folds neat-ly while not in use. Features a textured top, rubber-coated bottom, and a magnet to hold the purse hanger in the folded position.

Giftware

Key Finder

Available in two styles; flat or bezeled round design, which features a 25 mm cabochon insert.

ID Item # Type

A AAN KFF Flat

B AAN KFR Bezeled Round

BA

ID Item # Type

A AAN PH Round

B AAN PHF Flat

Purse Hangers

Purse hangers are nickel-plated with an overall length of 96 mm.Available in flat or round design.

BA

Item # Pad Size

AAN KRF 2 x 1.5"

Key Ring – FlatThe flat key holder pallet works well for un-usual or organic shapes.Dimensions: 2" long x 1.5" wide.

Item # Pad Size

AAN KRR 1"

Key Ring – RoundThe round key holder works well for circular shapes. Dimensions: 1" round x .125" deep.

Item # Pad Size

AAN KR 1"

Key Ring- CloverTruncated clover design with split ring and1" dia. depression for fused cabochon.Size: 3.5 x 1.5 x 0.5".

Item # Pad Size

AAN BM .25 mm

Bookmark – RoundNickel-plated for great looks and durability. Just glue your glass art in the round, 25 mm dia. insert.

Item # Length

AAN BMF 6"

Bookmark – FlatFlat "Onion" top. Silver tone book mark from Aanraku.

Item # Pad Size

AAN LOF 1.5"

Letter Opener - FlatOverall length: 7".Gluing surface width: 1.5".

Item # Pad Size

AAN LOR 1"

Letter Opener - RoundOverall length: 7".Gluing surface dia.: 1".

Item # Description Mandrel width / length

AAN LOL Long .093" / 4"

AAN LOS Short .125" / .125"

Letter Opener - Bead

Create custom giftware easily- just adorn these nickel-plated letter openers with cabochons or beads! Approximately 7" long.

BA

Item # Type

AAN PHC Round

Compact Purse Hanger

Purse hanger is nick-el-plated with a hanging length of 60 mm. Fits 34 mm circular cabochon.

Key Finder – Heart

Rod size is 3/32". Hole size will accommodate a 1/2" bead.

ID Item # Finish

A BF SHKR Silver

B BF GHKR Gold

BA



BAIL

S, F

IND

INGS

& D

ISPL

AYS

Giftware

ID Item # Type

A AAN BECL Clear

B AAN BEMC Medium Cherry

Wood Book Ends - Pair

The bottom of the ends are 5.75" in length, and 7.5" in height. The grooves within the ends can hold glass that is 7 mm in width, and up to 6.25" in height and 4.75" in length.

BA

Functional Displays Display Boxes

A

Display Accessories

Item # Size

MG MD10 .5"

Metal Disc MagnetHigh-power metal (neodymium).Sold in packs of 10.

Item # Size

3M BP516 .3125"

BumponBumpons are self-adhe-sive, clear, polyurethane buttons to protect your glass projects on table tops. Perfect for coasters, tiles, plates, bowls and sculptures.

Bumpons can also help keep projects from rocking if the bottom is not absolutely flat. Special adhesive sticks and stays..3125" dia. by approximately .125" tall, 96 per card.

Item # Dia.

INL 60529 .75"

IMP CUP SM .75"

IMP CUP LG 1.5"

Suction CupsSold in bags of 100.

Item # Finish

AAN PBR Nickel plated

Round Pill BoxFeatures three compart-ments inside. Lid has a push button release and a 1" depression to hold fused or dichroic glass pieces.

Item # Finish

TOP CB Antique Copper

Candle BootsCreate stylish and func-tional giftware using Candle Boots! Attach one or several of these candle holders to the back of a slumped glass piece turning your glass

into a one-of-a kind candleholder or cande-labra. Simply adhere to glass with E6000 or a similar adhesive; the glue tab is textured for better adhesion. Each boot measures 1 1/2” long and is designed to fit tapered candles 3/8" wide or smaller. Sold in bags of 3.

Item # Description

AAN TS2 2 Levels

AAN TS1 Add on

Tiered Tea Server HardwareTea service hardware creates a fantastic two or three level functional piece of glass art.Rod: Brushed Stainless Steel, 5" dia. x 11.5" tall with two levels and 16"

tall with the third layer (sold separately).

Item # Size

AAN R6R 6"

Ruler with Cabochon InsertAdorn this 6" ruler with a cabochon for a quick and easy gift perfect for him or her.


A AAN SQBS Small 5.375"

B AAN SQBM Medium 7.5"

Square Box

Display your fused or stained glass in this beau-tifully finished wood box, and use it to store jewelry, trinkets, or treasured items. Features a hinged lid.Small: holds 3.75" sq. glass, viewable 3" sq.Medium: holds 6" sq. glass, viewable 5.25" sq.

B

Product Additions

Box Feet

Brass box feet provide the perfect finishing touch for stained glass boxes. Angled at 90 degrees for corner placement, just solder in place & finish as desired. Stamped brass, 1 1/4" x 1". Sold in packs of 12.


A BX FTA Style A

B BX FTB Style B

BA


BAILS, FIND

INGS & D


ID Item # Type Finish

A AAN WS SF Flat Stainless Steel

B AAN WS SR Round Stainless Steel

Premium Wine Bottle Stopper

Food-grade stainless steel will not oxidize, pit or flake with long-term wine storage.

BA

ID Item # Type Mandrel SizeDia. / Length

A AAN WSS Short .125 / 1"

B AAN WSL Long .093 / 3.875"

Wine Stopper - Bead

These bottle stoppers are for display and serving - not long term storage. Use exceeding one week can cause pitting and flaking of the plating.

Wine Stoppers & Bases

Item # Finish

AAN WSB3 Stainless Steel

Wine Stop Base Overall length: 7".Gluing surface dia.: 1".

BA

ID Item # Type

A AAN WSF Flat

B AAN WSR Round

Wine Bottle Stopper

These bottle stoppers are for display and serving – not long term storage. Use exceeding one week can cause pitting and flaking of the plating.

BA

ID Item # Type

A AAN WSB1 1 Hole

B AAN WSB2 2 Hole

Wine Stopper Base- Wood

Display your Art Glass Wine stoppers in style. Add an art glass wine stopper (not included) to make a great gift set- all you need is the wine!

BA

Giftware & Displays

Display StandsAdjustable Easel Stand

Holds most any shape from 7– 18" in size. Back adjusts up & down, legs adjust in and out. Powder coated steel construction.

Item # FF AE710

Metal Display StandDisplay from small fused tile to a large gallery piece! The inno-vative patent-pending design of the stand allows it to be used

Item # CLA 238

individually to hold glass panels from 4-6", or used in pairs to hold glass panels from 8-14", or circles from 8-10".

L-style Display StandBlack powder-coated iron display stand. Use just one or use a pair for larger pieces.

Item # Size

FF L23 3.25" vertical, 2.63" horizontal with 1" legs; 4.5" tall overall

FF L75 7" vertical, 5" horizontal with 2" legs; 9" tall overall



BAIL

S, F

IND

INGS

& D

ISPL

AYS

Display Stands

Item # Size BaseMaterial

Finish or Color

ASI SC Small Acrylic Clear

ASI SB Small Acrylic Black

ASI LG Large Aluminum Galvanized

ASI LB Large Aluminum Matte Black

Art Display Stand Display plates, bowls and panels with these elegant stands. The stur-dy interlocking design breaks down to store or ship flat – so they are easy to handle.

Small: 8.5" wide x 6.25" deep x 5.5" high and can hold up to 8 lbs. Large: 1" wide x 8.5" deep x 7.25" high and can hold up to 25 lbs.ASI LB Shown.

Circle Display StandBlack, wrought iron, votive candle holder, holds glass art up to .5" thick.

CircleItem #

Square Item # Glass Size

IAS C8 IAS SQ8 Holds 8"



IAS C14 – Holds 14"

Display Stands

Black, wrought iron, glass art stands display finished stained glass, mosaic, or fused artwork up to .5" thick.

Item # Glass Size

IAS FFPS5 Holds 5.25"

Candle Holder - Votive Stand

Black, wrought iron, votive candle holder, per-fect to back light your glass art up to .5" thick.

ID Item # Type Size

A IAS CRT5S5 Circle 5"

B IAS CSTS5 Square 5"

BA

Wall-Mount Circle StandBlack, wrought iron, votive candle holder, holds glass art up to .5" thick.

Item # Glass Size

IAS FFWS5 Holds 5.25"

Round Item #

Square Item # Size

IAS RTS8 IAS STS8 8"

IAS RTS10 IAS STS10 10"

Display Stands Choose from round styles that will display pieces with diameters of 8 or 10" and square styles that will display pieces measuring 8 or 10" across.

Crescent Table StandBlack, powder-coated iron display stand.Accommodates 12" circles and features flex-ible holders for different thicknesses of glass.

Item # FF CR12

Base StandBase stand can hold pieces around .5" in thickness, and up to 18" in height, and about 4 lbs. in weight. The smallest piece of glass this stand will hold is

Item # Size Finish

SM BS8 8.5 x 4 x .75" Glossy Black

5" wide. Round pieces must be 5" wide at .75" into the edge.

Pewter CrossCenter: Opening (1.75" circular insert).

Item # Finish

PEW CCR Pewter

Displays


BAILS, FIND

INGS & D


Wall Mounts

Wall Mounts


HYG 200S4 Small .5 x .625"

HYG 201S4 Small .625 x .625"

HYG 100S4 Original .5 x 1.25"

HYG 101S4 Original .625 x 1.25"

HYG 300S4 Medium .625 x 1.5"

HYG 400S4 Large .625 x 2"

Round Stand-OffsRound stand-offs are for use with panels and larger works of glass. Four stand-offs are typically used on square panels, two stand-offs are typically used for

Hang Your Glass™ is a stand-off based mounting system that easily and elegantly displays your artwork. This frameless system caters to all mediums of glass and is excellent for small to large compositions. Hang your Glass™ is the most versatile system available, able to mount any glass shape at any angle. Simply attach the aluminum stand-off to your glass art with Hang Your Glass Adhesive, mount the hanging bracket to the wall, and Hang Your Glass. Choose from Original multiple-mount stand-offs, individual Locking stand-offs, the sleek Super Duty stand-offs, or Nesting stand-offs, which allow glass to be mounted onto existing glass work; creating multi-layered, three dimensional pieces.

Hang Your GlassTM

rectangular panels. For very large pieces and heavy panels more than four stand-offs may be required. Increase the diameter of the stand-off for larger, heavier pieces. Sold in packs of 4.


HYG 102LK Square .625 x 1.25"

HYG 202LK Small .625 x .625"

HYG 301LK Medium .625 x 1.5"

HYG 401LK Large .625 x 2"

Locking Stand-OffsLocking stand-offs are sold in individual units with a bracket and screw. The square head design of the Locking stand-off prevents any rotation of the stand-off

within the bracket, keeping the art properly positioned regardless of any weight imbalances of the piece.Use one locking stand-off per piece of artwork. Ideally artwork would be any shape less than 9 x 9" and less than 5lbs.


A HYG 7033XP .75 x .375" Polished

A HYG 7003SP .75 x .75" Polished

B HYG 7003SB .75 x .75" Black

A HYG 7101SP 1 x .75" Polished

B HYG 7101SB 1 x .75" Black

A HYG 7111MP 1 x 1.5" Polished

A HYG 7205XP 1.5 x .75" Polished

B HYG 7205XB 1.5 x .75" Black

Super Duty Stand-offs are ideal for bowls and artwork with only one attachment point. Streamlined design, no screws visible once stand-off is placed into bracket on the wall.Sold individually.


A HYG 8023XP .75 x .375" Polished

B HYG 8018SB .625 x .75" Black

A HYG 8033SP .75 x .625" Polished

Nesting Stand-Offs

Create 3-D art with Hang Your Glass nesting stand-offs. Simply place individual stand-offs between glass layers to create 3-D effects. Eas-ily disassemble art for shipping and cleaning.

Super Duty Stand-Offs

BA

BA

Item # Description Appilications(min)

HYG ASSM Small 25

HYG ASLG Large 50

Adhesive SetHang Your Glass Adhesive is the strongest adhesive available to glass artists. Small set contains a minimum of 25 applications on 1/2" diameter. Includes: 2 dram Activator w/dropper; 2 drams Adhesive and sampling of alcohol

prep pads. Large set contains a minimum of 50 applications on 1/2" diameter. Includes: 4 dram Activator w/dropper and 2 oz Adhesive.Hang Your Glass adhesive is for use on flat surfaces containing gaps less than .5 mm. Adhesive can be used for glass-to-glass and glass-to-metal applications. Detailed instructions and SDS sheet available at www.dlartglass.com.

Template D CurveFor .625" Stand-Off.

Item # HYG TDC58

Hang fused glass pieces anywhere with this wall mounting device from Aanraku.Wall Mounting Device is 1 1/4 inches in diame-ter and made of stainless steel. Accommodates glass up to 1/2 inch thick. Add the Wall Mount Extender unit to mount glass further off the wall.

BA

ID Item # Type

A AAN WMD Device

B AAN WMDX Extender

Wall Mounting Device & Extender



BAIL

S, F

IND

INGS

& D

ISPL

AYS

Lighting

Lighting

Item # Color

EAG NL Beige

EAG NLBLK Black

EAG NLWHT White

Night Light with Toggle Switch

Create custom night lights with fused or stained glass with high quality night light bases.Simply glue your glass art to the brass clip (CH

CLIP) and affix to base. Clips and 4 watt bulbs sold separately. UL listed.Use ONLY a 4 watt bulb with this base. Higher wattage bulbs may cause the bulb to overheat!

Product Additions

Night Light Additions

Item # Description

CH CLIP Brass Clip

NL BULB 4 Watt Bulb

NL BULB7 7 Watt BulbItem # Color

EAG NLWHTA White

Night Light with Sensor

Automatic night light base turns on when room darkens. Create custom night lights with fused or stained glass with high quality night light bases.

Simply glue your glass art to the brass clip (CH CLIP) and affix to base. Clips and bulbs sold separately. UL listed.Note: Use 7 watt bulbs with this base.

Sconce Hardware

Wall Sconce with ClipsWall sconce hardware bracket has flexible clip system to hold glass in place without holes or screws. 75 watt maxi-mum candelabra bulb required. Designed for

use with the sconce forming mold FF W1012. FF W1012 is 10.25 long x 12.5 wide x 1.75". deep.

Item # Description

RA WSK Complete Kit

RA WSH Hardware Kit

Wall Sconce Kit

This complete versatile wall sconce fixture kit accommodates sconce shades from 6–8" inside width. It is designed to utilize a standard mounting system for your art glass with dual candelabra style bulb sockets. Shades require two .25" holes for mounting, mounting hard-ware included. Hardware kit (RA WSH) offers 3 bracket width options (measured inside of shade): 6.5, 7.25 and 8". All electrical components are UL listed.Included in the Hardware Kit: Fixture - White powder coated steel construction which is wired with two candelabra (E12) sockets, shade mounting spools, shade mounting grommets, ball nuts, wiring kit.

Wall sconce hardware is designed for use with the sconce forming round mold FF WC40 (9 x 8") and angled mold FF WC710 (9 x 8 x 3.75").

Item # FF SCHD


A RA PK3 3 Leaf

B RA PK4 4 Leaf

C RA PK8 8 Leaf

Pendant Light Kit

Create unique and beautiful pendant shades with shaped and slumped fused glass leaves. Kits include a 4.5" diameter white powder coated steel construction mount, clear plastic grommets, mounting grommets and ball nuts.

This creative shade kit can be attached to many "off the shelf" pendant fixtures (not included). Design possibilities are endless; create flat-sid-ed glass leaves or slump with the optional Pendant Shade Light Kit (RA PKTK).

A

CB

Item # FF SCOG


BOO

KS & VIDEO

S D&L is committed to providing the newest products in a growing industry.

Books

Fusing Books

Everything You Wanted to Know About Fusing

Everything you Wanted to Know About Fusing is a comprehensive beginner's manual on fusing and slumping. Topics include setting up your studio, scoring your

glass, stainless steel and ceramic molds, kilns and firing schedules, preparing your glass for slumping, design work, what went wrong, and even a glossary and schedule chart for your own work. 109 pages.

Item # FUS B2173

Kiln - Formed Glass (Beginner's Guide)

Kiln-Formed Glass (Begin-ner's Guide) covers all of the fundamentals of melting cut or crushed glass including slumping and draping, pot melting, inclusions, mold making and more.

Item # FUS B2209

Contemporary Glass EnamelingContemporary Glass Enameling covers a wealth of traditional and innovative contemporary glass enameling techniques. Discover the techniques for decorating glass by using wet enamel paints, dry enamel

Item # FUS B2121

powders, frit, hot glass inclusions (sheet copper, gold and silver leaf, wire, mica flakes) and other unique tools and gadgets. Contemporary Glass Enameling also includes valuable information on fusible glass, enamel color selection, molds, kilns, firing and annealing.

Kiln Crafting - Hot Tips for Fusing and Slumping Glass

This publication contains over 50 Kiln Crafting columns from Stained Glass News. How to program your con-troller. Topics include: how to keep your glass from breaking in the kiln, tips on picking the

right mold for each project, when to modify your heating cycles, how to get the most out of mini kilns, important options for eye safety, ways to use dichroic glass, and types of mold making materials.

Item # FUS B2280

Fused Glass Art and Technique by Richard La Londe

Fused Glass Art and Tech-nique by Richard La Londe includes the technical aspects of glass fusing, as well as 50 pages about La Londe's fusing techniques. 224 pages with 475 photographs, 412 in full color.

Item # FUS B2185

Richard La Londe & FriendsRichard La Londe is back! (And this time he brought his friends.) Book II in his series of fused glass techniques explores many different topics, including enamels, lusters & glass painting, the

technical aspects of glass fusing, numerous "how-to" guides including instructions for 10 easy slump molds, and much, much more! 240 pages with over 600 color photographs.

Item # FUS B2257

Fusing Images on Glass

A comprehensive step-by-step guide to fusing images to or in glass with Photo Fusing Paper (FUS PFP). Provides technical informa-tion, troubleshooting guides, & fantastic project ideas.

Item # FUS B2227

Designs for Glass EnamelingOver 130 multi-purpose patterns are offered in the book in various complexi-ties, sizes, motifs, and styles from traditional to abstract. The collection includes painting, silhouettes and

stencil patterns. Patterns are ideal for creating tiles, tableware, box tops, panels, tabletops and more.

Item # FUS B2168

Brush On Color MagicThis practical reference explores the application and unique potential of Color Magic on such varied surfaces as metal, glass, mirror, sandblasted designs, plastics, wood, leather,

canvas, pottery, porcelain, shell and bone. Brush on Color Magic contains simple step-by-step techniques and how-to photos that cover a wealth of exciting ideas, including Glass art, Handcrafts, Jewelry, Miniatures, Sandblasted glass (airbrushing), and more.

Item # BKS B0058

Stand-UpsStand-Ups: The evolution of your fused glass proj-ects is here. Book includes patterns and instructions for standing glass figures using the Stand-Up molds. The book is 28 pages and

features color images, patterns, and instruc-tions for 20 various standing glass figures. Published by Creative Paradise, Inc.; the maker of the popular Stand-Up molds.

Item # CPI B2252

Fused Glass FlowersFused Glass Flowers, for use with the flower molds by Creative Paradise, includes 46 pages of patterns, tips and instructions to make more than 30 fantastic fused glass flowers and other botanical

delights. The book features color images, detailed glass patterns and firing schedules, as well as step by step instructions to add fused glass flowers to copper stems. 2nd Edition. Updated in 2018.

Item # CPI B2255

Beginning Fusing & BeyondBeginning Fusing & Beyond includes 20 exciting projects for the glass fuser. Projects include vases, bracelets, clocks, spoon rest, stamping and wind chimes. Clear step-by-step instructions and clear pictures.

Item # VSG B2262



BOO

KS &

VID

EOS

Fusing Books

Books

Glass Casting and Mold MakingLearn the techniques of Pate de Verre, Lost Wax Casting and Crucible Casting from well known glass fusing expert Boyce Lunstrom in Glass Casting and Mold Making. Mold materials and

formulas, metal, clay, sand and fiber molds are also covered. Safety and technical info with over 140 photos.

Item # VIT B0245

Kiln Formed BraceletsFollow this bestselling author’s step-by-step Instructions to create your own kiln formed 3D glass masterpieces. This 80-page book offers 13 chapters covering tools,

sizing, preparation, bracelet forming, adjust-ments, embossing, cane fabrication, pattern bar making and much more.

Item # WAR B2151

Kiln Casting with Colour de VerreKiln Casting with Colour de Verre is an 80-page book offering more than 260 color photographs in 12 chapters that is sure to inspire dozens of exception-al projects. The clear and

simple instructions enable fusers of any skill level to achieve amazing decorative elements, plates, bowls and jewelry.

Item # WAR B2201

Fusing Log SheetsGet organized with fusing log sheets. Sheets come in a familiar ‘writing pad’ style with convenient tear off pages. Each log page is pre-printed (in 2 colors).25 pre-printed sheets.

Item # WAR B2284

Kiln-Formed Glass: Beyond the Basics

Brenda Griffith will walk you through more advanced techniques to use in your studio, including airbrush-ing, sandblast carving, 3-D printing, mokume-gane, marbling, pastel-making and more. 224 pages.

Item # STE B2322

Glass Fusing Book 1

Glass Fusing Book One is a must for beginners and a great adjunct for the experienced glass worker. It has a wealth of information covering tools, compatibility

Item # VIT B0260

testing, annealing, glass qualities, kiln and kiln preparation, sagging, slumping, fusing, cutting, grinding and polishing.

Fused Belt Buckles

Fused Belt Buckles is an instructional book which contains easy patterns for making round and oval disks that will smoothly fit belt buckle inserts (sold separately). Includes detailed

Item # AAN B2038

pictures, instructions and firing schedules.

Contemporary Fused Glass

Item # FCI B2267

Replacing the popular title Contemporary Warm Glass, Contemporary Fused Glass has even better tutorials and expanded sections on inclu-sions, surface techniques, pattern bars, high tempera-ture firing and much more!

Printmaking Techniques on GlassExtensively illustrated with over 700 full color photographs, Printmaking Techniques on Glass is a great resource for artists, crafters, and hobbyists who want to learn how to adapt

Item # FCI B2282

traditional printmaking techniques for use on fused glass.Author: Jody Danner Walker. 240 pages.

Introduction to Glass FusingIntroduction to Glass Fusing by Petra Kaiser is an illustrated tutorial on the techniques of art glass fusing, geared toward the absolute novice in the craft. This all-color book is

filled with hundreds of step-by-step photos, useful tip sidebars, and complete project instructions. Crafters will master a new skill while creating an item to wear, display or use in their home.

Joy of Fusing - Fusing Basics, Molds & More

From the bestselling author of Introduction to Stained Glass, Joy of Fusing contains everything you need to know to be a successful fusing artist. Joy of Fusing contains 27 projects with color pho-

tographs and easy to follow instructions and firing schedules.

Item # WAR B2279

Item # WAR B2048

Full-size Project Drawings from Joy of Fusing

Full-Size Project Drawings contains 27 fusing projects as shown & described in Joy of Fusing.The 32 full-size drawings will enable crafters to recreate the fusing projects in Joy of

Fusing exactly as they appear. Each project drawing has a list of specifications, a firing schedule, the forming mold used and color suggestions. 16 pages.

Item # WAR B2283


BOO

KS & VIDEO

S D&L is committed to providing the newest products in a growing industry.

Books

Fusing Books

Glass Forming w/ Mold Block System

Presented in an easy to follow project guide format, the Mold Block System (using Kasier Lee board) will produce complex & unique glass shapes that would be very difficult by any other

method. 40 pages, over 100 color photo-graphs, by Petra Kaiser.

Item # WAR B2249

Illuminated Art GlassCreate elegant light sculptures in your kiln with instructions for glass frit casting, fusing assembly and deep-drop slump forming. This 80-page book features more than 160 color photo-

Item # WAR B2253

graphs. Step-by-step instructions will guide the reader through 14 unique projects.

Kiln Casting Glass - Lost Wax and Reverse Relief

In this book, you will learn how to: make a silicone rubber mold, invest the resulting wax positive in high temperature casting plastersteam out the wax, calculate the volume of glass needed

to precisely fill the investment mold, write your own firing program to melt and cool the glass, divest and clean the finished casting. 158 pages.

Item # BMP B2312

Innovative AdornmentsInnovative Adornments, written by popular glass artist Jayne Persico shares many important fused glass and wire jewelry techniques with students while provid-ing inspirational guidance

Item # WAR B1087

and motivation for established crafters in this publication. Contains: 80 full-color pages & 250 color photographs.

Lisa Vogt - Fused Vessel Sinks

Join veteran glass fusing artist Lisa Vogt as she shares the various advanced kiln forming techniques she uses to create lavish, functional basins. In this comprehensive 75 minute video Lisa will guide you step-

by-step from design to drilling drain holes.

Item # FUS V159D

Lisa Vogt - Fused Art DesignOrdinary to extraordinary, outstanding artwork is within your reach! In this video, award winning artist and pattern book author Lisa Vogt will reveal time-tested techniques she uses to create dynamic, original

art. Whether you're a beginner or advanced glass fuser, the deeper understanding of design gained from this video will drastically expand your artistic potential.

Item # FUS V162D

Fusing Videos

Lisa Vogt - Painting with Frit

Join glass artist Lisa Vogt and learn how to combine traditional design methods with gradient blends and soft washes by painting with frit to produce striking imagery. In this comprehensive

75-minute video, Lisa will show how to apply her techniques to create dramatic effects with frit and powders on six different projects.

Item # V160D

Lisa Vogt - Breaking Through: Making Exhibition Quality Art

Experience the thrill of limitless possibilities. In this comprehensive video, Lisa Vogt will show you how to use advanced techniques in combination to take your art to exciting new levels of

sophistication. You'll learn how to successfully pair different techniques to produce refresh-ingly new dramatic effects.

Item # FUS V163D

Lisa Vogt - Go with the Flow

Join glass artist Lisa Vogt in this comprehensive, advanced technique-driven video and she’ll show you how to com-bine new-found concepts with traditional design to create stunning, original art. As Lisa

demonstrates how to use this new technique on more than five projects, you’ll see how quickly it’s exploration will elevate your artwork to an exciting, new level of sophisti-cation.

Item # FUS V161D

Lisa Vogt - Fun and Fanciful Fusing

Fun and Fanciful Fusing with Lisa Vogt is an exciting video DVD that is all about having fun! In this fast-paced video Lisa will share her pro tips for work-ing with color. You’ll be guided step-by-step through the many

firing processes, plus receive Lisa’s time-tested firing guides and her helpful tips for making your own custom display stands.

Item # FUS V165D

Lisa Vogt - Advanced Glass Fusing

Advanced Glass Fusing with Lisa Vogt will show you how to master combing, free flows, pattern bars, creative slumping, extraordinary glass design and crafting unique display stands. You’ll

be guided step-by-step through the complex firings used to produce engaging, multifaceted projects.

Item # FUS V166D

Lisa Vogt - Get Fired UpIn this 45-minute video Lisa demonstrates everything you need to know to "Get Fired Up" for a successful fusing project, every time. She covers glass selection, tools and materials, different

Item # GLP V116D

kilns available and several glass manipulating techniques using a variety of fusible glasses.



BOO

KS &

VID

EOS

Fusing Videos

Videos

Kiln Formed Bracelets & Watch Bands with Vicki Payne and Persico

Jayne Persico shows you how to make designer curved glass bracelets and watch brands using a glass kiln. Learn how to design, cut glass, kiln set up, fire glass, as well as sizing, bracelet forming, watch band designing on wire wrap.

Item # CUT V133D

Glass Embossing DVD with Vicki Payne and Persico

This DVD features Jayne Persico's latest innovation, The Glass Embossing System. This exciting trademarked system uses a series of components to press flowers, leaves scrolls and other designs into glass. Em-

Item # CUT V134D

Glass Fusing & Slumping Techniques with Vicki Payne

Join the fun and learn to fuse! Vicki takes you step-by-step through your first two fusing projects with easy to under-stand, uncomplicated instruc-tions. This is your opportunity to explore the basics of this fun hobby.

Item # CUT V135D

Glass Cane Bracelets with Vicki Payne and Persico

Learn how to create glass cane using a kiln. This 30 minute instructional DVD covers layering, firing, pulling and manipulation of cane. Cane can be used to create bracelets or design elements for other fusing projects.

Item # CUT V136D

Fused Glass Jewelry DVD Vicki Payne and Persico

Take the confusion out of creating beautiful fused glass jewelry with this DVD. Cover all the basics and learn some advanced tech-niques as well. 60 minutes.

Item # CUT V137D

bossing tools will create a world of possibilities for adding patterns to your fused glass work.

Vitri-Fusaille with Peter McGrain

Vitri-Fusaille is Peter McGrain's amazing new technique which combines the multi-stage process of traditional glass painting with modern glass fusing. Follow along as Peter presents an easy to follow step-by-step

Item # GLP V138D

Fritography with Michael DupilleA step-by-step course in creating imagery with glass frit. Join nationally renowned glass artist Michael Dupille as he walks you through this exciting kiln formed glass technique. He has taught

Item # GLP V141D

When the Frit Hits the FanLearn to use frit in new, dynamic ways from acclaimed glass artist Michael Dupille with this two-disc dvd set.When the Frit Hits the Fan con-tains three projects. Working with Organic Shapes, Scratch

Item # FUS V157D

'N' Frit and Frit Sticks, and Fritzels and other parts.

Introduction to Lost Wax Kiln Casting

This DVD will open the door-way for you to successfully cast small and medium scale glass sculptures using the lost wax process. Two DVDs, nearly four hours of instruction, includes:

Item # FUS V143D

silicone rubber moldmaking, pouring wax, wax investment, volume calculations, divsetment, cleaning, finishing & much more.

Large Scale Lost Wax Kiln CastRenowned glass artist Milon Townsend sets out simple step-by-step instructions on the process of lost wax kiln casting in this dvd. Casting larger glass artwork requires larger tools and equipment,

Item # FUS V156D

but the process is just as accessible as making smaller pieces.

Traditional Glass Painting - Vol IA two-DVD set containing 3 hours of instruction by Peter McGrain on Traditional Glass Painting. A guide to the age-old techniques presented in a simple step-by-step format. Explains all of the materials and techniques.

Item # GLP V118D

Traditional Glass Paint Vol IIThis program expands upon the fundamental techniques presented in Lesson One of this series. Discover how the basic processes of tracing and matting can be applied to colored sheet glass to make vi-

Item # GLP V128D

program which will show you everything you need to know in order to begin creating bright and colorful Vitri-Fusaille art pieces of your own.

hundreds of aspiring glass students his unique method of working with frit and now you can learn it too!

brant stained glass panels. Learn how to achieve multiple paint applications using the direct painting method. See how full-color illustra-tional effects can be accomplished through the use of silver stains, and much more!

Aisles of Glass

Visit Us!1440 W. 52nd Ave. Denver, CO • 80221

Monday - Friday 8:30 am - 5:00 pmOnly 30 minutes from Denver Int'l Airport

®

42,000 Sq. Ft. Warehouse

Sheet Glass • Frit • Dichroicand so much more!

18,000+ Products

Quality Service from People Who Care

Visit Us!Online

®

dlartglass.com

Shop Online 24/7 Glass • Tools • Molds • Kilns

and so much more!

Take a Class• Renowned Instructors

Classes for Beginners & Experienced Artists

• Open Studio Sessions 1,400 Sq. Ft. State-of-the-Art Classroom

Get SocialFollow Us! • Like Us!

Quality Service from People Who Care

www.dlartglass.com


Terms & ConditionsNEW WHOLESALE ACCOUNTS• D&L Art Glass Supply, located in Denver, Colorado, is a dis-tributor of art glass and related products. We welcome resell-ers, manufacturers, commission artists, glaziers, teachers, and designers to apply for wholesale status online. Opening orders must be at least $250.00.• International Accounts: D&L Art Glass Supply is an established international wholesale distributor of art glass products. We are reliable, experienced, and have been delivering quality products and services internationally since 1974 to customers in over 20 countries on six continents. Email D&L with your supply list today for a quote.• D&L Art Glass Supply has the right to make the final decision on approval of wholesale accounts. Possession of this catalog does not ensure the right to purchase. • D&L’s store front is open to the public for retail purchases.PRICINGD&L offers various pricing programs and all prices are subject to change without notice. Please contact us for details. TERMS OF SALEAll sales are subject to the terms and conditions listed on the back of the D&L invoice. D&L shall not be liable to the Buyer for any damages that the Buyer may claim are caused by late delivery. CREDIT CARDSMasterCard, VISA and Discover are accepted.ORDER INFORMATIONOrdering MethodsOnline Ordering – Request your online account and shop 24-7. Go to www.dlartglass.com for products and pricing. Call, Email or Fax – Let our knowledgeable staff assist you and experience our outstanding service.Walk-in – Visit our impressive 42,000 square foot warehouse housing over 18,000 products.Minimum Order Requirements• Small package – $75.00 *• Pick-up/Walk-in – $50.00 * *Orders below the minimum are subject to an additional charge.Special OrdersIf you need it, we will find it! We are committed to deliver any product you need. Special order items cannot be canceled nor returned for any reason. A non-refundable deposit may be re-quired upon placing a special order.SHIPPING & PACKAGINGGeneralAll shipments and prices are FOB Denver, Colorado.Small package (UPS and FedEx) glass and tool orders placed before 3 p.m. (MST) are usually shipped the same day.Expedited, international, and drop-ship are available.Glass via Box Shipments D&L offers glass shipments via box in various box sizes. Call your sales representative for details. There is a box fee in addition to shipping charges. Glass boxes are a one-time use. Customer assumes all responsibility for glass damages.Hazardous and Regulated MaterialsD&L packs and ships according to federal regulations. Hazard-ous materials are shipped via motor freight only. SDS sheets are available at dlartglass.com/about/msds.

Additional fees for items and services include, but are not limited to:• Insurance • Oversized-box charges• Various specialized boxes • Crates/skids• Additional handling charges Cutting feesBACKORDERS D&L keeps a fantastically well-stocked inventory. Occasionally an item you wish to order may be out of stock due to popularity or manufacturer out-of-stock. At your request, we will notify you of out of stock items prior to shipping. D&L staff is happy to suggest substitutions for any out of stock items. We will notify you when your back ordered item(s) are in stock and available to ship. CUSTOMER SATISFACTION POLICYOrdered It WrongAll sales of glass, special orders, books, patterns or discounted items are final. Other returns are accepted within 15 days of purchase. Before you return merchandise you must call your account representative. Returned items must include the D&L invoice, all accessories, the reason for return and the original packaging. You will be responsible for return freight and up to a 25% restocking fee.Received Incorrect ItemsIf incorrect merchandise or quantities are received from D&L, notify us within five days of receipt and allow us to correct the problem. Failure to notify D&L is considered evidence that D&L has satisfactorily performed its obligation.Defective ProductsIf you receive defective items, notify D&L immediately. Our representative will tell you whether to return the item to D&L or directly to the manufacturer.D&L will honor only defective material that is backed by manu-facturer warranty and sold by D&L. D&L’s sole obligation is limited to repair or replacement of the subject merchandise as provided herein. There shall be no express or implied warranty of merchantability or of fitness for a particular purpose. In no event shall D&L be liable for consequential or incidental damages. No replacement after 60 days. No claims for labor or damage will be allowed.Damaged MerchandiseWe ensure that all items are in good condition when they leave our warehouse. D&L is not responsible for any subsequent dam-age. If you receive damaged goods, you must accept the ship-ment, note evidence of damage on your delivery receipt and file a damage claim with the freight carrier. D&L will provide informa-tion to assist you with your claim.If you receive a damaged small-box shipment retain all packing materials, take pictures and contact your account representative. If you refuse any shipment from D&L, you will be liable for the purchase price of the merchandise, storage charges, subse-quent freight charges to and from D&L, as well as any additional charges.Protecting Your InformationWhen you do business with D&L, be assured that we will protect your customer information. We will not sell or share your infor-mation with other companies for marketing purposes. D&L Art Glass Supply values our relationship with you.

While we have made every attempt to ensure the accuracy and completeness of the information provided, D&L assumes no respon-sibility for errors or omissions.

This catalog represents the Fusing Tool and Accessory portion of D&L Art Glass Supply’s offerings.

D&L also stocks over 18,000 products for Fusing, Stained Glass, Torchwork, Jewelry, Craft and more.

See it all at www.dlartglass.com.

Artist Meredith Gill -D&L Education Coordinator

1440 W. 52nd Ave. • Denver, CO 80221www.dlartglass.com

Fusing - Art glass › Content › documents › Fusing...fusing and silver clays. Suitable for...

Documents

Transcript of Fusing - Art glass › Content › documents › Fusing...fusing and silver clays. Suitable for...