Furniture fittings, architectural hardware, electronic locking systems ...
Transcript of Furniture fittings, architectural hardware, electronic locking systems ...
Alto Drawer Systemopening up new opportunities
2013
2 Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
Smooth and effortless
Reinforcing these concepts, the Alto drawer system offer an
affordable solution coupled with quietness, smoothness
and ease of use.
The synchronised opening action of the Alto drawer is
supremely comfortable, thanks to proven knowledge
behind this soft-closing technology, leaving you in no doubt
of its quality.
Options aplenty
With a wide variety of drawer options available - including
86mm and 120mm standard drawer options, and 164mm and
204mm pot drawer options - the Alto drawer system suits
almost every application. Combined with length options from
270mm to 500mm, and multiple Alto-Box infill panels, the Alto
drawer ticks all of the boxes.
Tried and tested
The Alto drawer system has been independently tested
and passed the exacting European DIN EN15338 Level 3
standards. This was achieved with a full 35 kg weight
capacity over 60,000 opening and closing cycles
• Load capacity: 35 kg• Material: Steel drawers• Finish: Powder coated, white• Version: Full extension, with integrated soft-close• Adjustment: Front: 2 dimensional, also tilt for drawer
front adjustment with railing systemAdjustment horizontally ± 1 mm,adjustment vertically ± 2 mm
• Mounting: Front fix brackets snap into drawer sideswith knock-in mounting on drawer front
Mounting
Adjustment
Drawer insertion and removal
3Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
Drawer length (mm) Cat. No.270 552.67.760400 552.67.763450 552.67.764500 552.67.765
Packing: 1 set
Drawer Set 86 mm
Drilling dimensions for cabinet
Drilling dimensions for drawer front
Drilling dimensions for drawer runner
Drawer Set 120 mm
Mounting
136
min
. 150
37.5±0.5
min
. 56
37.5±0.5
min
. 54
32
19.5
32m
in. 5
4
12
3232
9 44.5
Drilling dimensions for cabinet
Drilling dimensionsfor drawer front
Drilling dimensions for drawer front
Drilling dimensions for back
Drilling dimensions for drawer runner
Drawer length (mm) Cat. No.270 552.66.760400 552.66.763450 552.66.764500 552.66.765
Packing: 1 set
Mounting
Alto Drawer System
• Height: 86 mm• Finish: White drawer sides and cover caps• Includes: Drawer sides, runners, knock-in front
fixing brackets, back panel brackets andwhite cover caps
• Height: 120 mm• Finish: White drawer sides and cover caps• Includes: Drawer sides, runners, knock-in front
fixing brackets, back panel brackets andwhite cover caps
Drilling dimensionsfor drawer front
Drilling dimensions for back
Drawer length (mm) Cat. No.270 552.63.760400 552.63.763450 552.63.764500 552.63.765
Packing: 1 set
Drawer Set 164 mm
Mounting
Drilling dimensions for cabinet
Drilling dimensions for drawer front
Drilling dimensions for back
Drilling dimensions for drawer runner Drilling dimensions for drawer runner
4 Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
b Alto Drawer System
Drawer length (mm) Cat. No.270 552.64.760400 552.64.763450 552.64.764500 552.64.765
Packing: 1 set
Drawer Set 204 mm
Mounting
Drilling dimensions for drawer front
Drilling dimensions for back
220
min
. 225
min
. 56
37 ± 0.5
37 ± 0.5
19.5
min
. 54
32
32
32
64
32
44.59
10
min
. 54
3213
2
Drilling dimensions for cabinet
Drilling dimensionsfor drawer front
• Height: 164 mm• Finish: White drawer sides and cover caps• Includes: Drawer sides, runners, knock-in front
fixing brackets, back panel brackets andwhite cover caps
• Height: 204 mm• Finish: White drawer sides and cover caps• Includes: Drawer sides, runners, knock-in front
fixing brackets, back panel brackets andwhite cover caps
Drilling dimensionsfor drawer front
5Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
• Finish: White, powder coated, steel• To suit: 164 mm drawer sets
Drawer length (mm) Cat. No.400 552.69.753450 552.69.754500 552.69.755
Packing: 1 pair
Alto-box single metal hanging panel
• Finish: White, powder coated, steel• To suit: 204 mm drawer sets
Drawer length (mm) Cat. No.400 552.69.763450 552.69.764500 552.69.765
Packing: 1 pair
Alto Drawer System
Alto-box double metal hanging panel
6 Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
Assembly
• Finish: White
Cat. No.552.69.790
Packing: 1 pair
→ Internal front panel
Cat. No.Front panel, 1074 mm 552.69.780Cross rail, 1074 mm 552.69.786
Packing: 1 piece
Cat. No.552.69.791
Packing: 1 pair
→ Internal front panel and cross rail
Cat. No.552.69.799
Packing: 1 piece
Assembly
• Finish: White
• Finish: White
• Finish: White
• Finish: White
Cat. No.Front panel, 1074 mm 552.69.780
Packing: 1 piece
→ Standard front panel connectors
Adjustment
→ Tall front panel connectors
→ Handle for internal front panel
Internal Front Panel for 86 mm Drawer Internal Front Panel for 204 mm Drawer
Alto Drawer System
7Dim
ensi
ons
in m
mD
imen
sion
al d
ata
not b
indi
ng. W
e re
serv
e th
e rig
ht to
alte
r sp
ecifi
catio
ns w
ithou
t not
ice.
Alto Drawer System
• Area of application: Used to mark the front fix bracket drillingpositions on the drawer front
• Finish: Anthracite, plastic
Cat. No.552.69.999
Packing: 1 pair
Drawer Front Marker Jig Technical Information
Cutting dimensions - drawer set 86 mm
Cutting dimensions - drawer set 164 mm
Cutting dimensions - drawer set 204 mm
Bottom panel width=LW-75+0.5mmBottom panel length=Runner length-5mm
Bottom panel height=70mmBack panel length=LW-89+0.5mm
Bottom panel width=LW-75+0.5mmBottom panel length=Runner length-5mm
Bottom panel height=104mmBack panel length=LW-89+0.5mm
16 mm thickness materialLW: Internal cabinet width
Bottom panel width=LW-75+0.5mmBottom panel length=Runner length-5mm
Bottom panel height=148mmBack panel length=LW-89+0.5mm
16 mm thickness materialLW: Internal cabinet width
Bottom panel width=LW-75+0.5mmBottom panel length=Runner length-5mm
Bottom panel height=188mmBack panel length=LW-89+0.5mm
16 mm thickness materialLW: Internal cabinet width
16 mm thickness materialLW: Internal cabinet width
Alto Drawer System
Runner drilling dimensions
Cutting dimensions - drawer set 120 mm
• Area of application: Place over installed front fix bracket todetermine gallery rail position on drawerfront
• Finish: Anthracite, plastic
Cat. No.552.69.990
Packing: 1 piece
Gallery Rail Marker Jig
Cat. No.Knock-in front fix bracket 552.69.997
Knock-in gallery rail connector 552.69.998
Cover cap 552.61.770
Packing: 1 piece
Accessories
NoteCustomised cover caps are available upon request (MOQ = 2000 pieces)
This Catalogue is for use of the recipient only. It remains in all respects the property of Häfele. Reproduction of this brochure in whole or part, or the reproduction of the illustrations as well as the copying of the layout, is strictly prohibited.
All measurements given in this publication are not binding. Rights for design improvements reserved. Häfele holds no responsibility for typographical or other errors occurring in the catalogue production. All deliveries made corresponding to Häfele sales conditions.
Häfele reserves the right to adjust prices as may be deemed necessary.
2012. Copyright by Häfele. All rights reserved. Printed in Australia. 732.04.592 - 12.12
www.hafele.com
Melbourne Design CentreT: (03) 9212 2000F: (03) 9652 3701E: [email protected]
Sydney Design CentreT: (02) 8788 2200F: (02) 8302 2101E: [email protected]
Hobart Design CentreT: (03) 6331 7106F: (03) 6334 6414E: [email protected]
Perth Design CentreT: (08) 9209 8000F: (08) 9215 6101E: [email protected]
Auckland Design CentreT: (09) 274 2530F: (09) 274 2531E: [email protected]
Wellington Design CentreT: (04) 472 0294F: (04) 472 0295E: [email protected]
Christchurch Design CentreT: (03) 343 8200F: (03) 343 8201E: [email protected]
Häfele (NZ) Head OfficeEastern Design CentreT: (09) 274 2040F: (09) 274 2041E: [email protected]
Design Centres
HÄFELE AUSTRALIA PTY. LTD.State Offices
HÄFELE NEW ZEALAND LTD.
Offices and Design Centres
Victoria (Head Office)T: (03) 9212 2000F: (03) 9212 2001E: [email protected]
New South WalesT: (02) 8788 2200F: (02) 8788 2201E: [email protected]
QueenslandT: (07) 3307 8900F: (07) 3307 8901E: [email protected]
Western Australia / N.T.T: (08) 9209 8000F: (08) 9249 3328E: [email protected]
South AustraliaT: (08) 8232 9933F: (08) 8232 9977E: [email protected]
A.C.T & Southern NSWT: (02) 6202 2800F: (02) 6228 1418E: [email protected]
TasmaniaT: (03) 6331 7106F: (03) 6334 6414E: [email protected]
Northern New South WalesT: (02) 4921 0900F: (02) 4921 0901E: [email protected]
Brisbane Design CentreT: (07) 3307 8900F: (07) 3307 8901E: [email protected]