Funplay srl

Certifications Profile

Certifications Profile

Quality

• ISO 9001• ISO 14001

HIC Test EN1177

• FunShock 40mm• FunShock 45mm• FunShock 70mm• FunShock 100mm

Atossic Test

• EN 71/3• IPA

Certifications Profile

Quality

• ISO 9001• ISO 14001

Certifications Profile

HIC Test EN1177

• FunShock 40mm• FunShock 45mm• FunShock 70mm• FunShock 100mm

The anti-shock flooring FunShock 40

HIC 1000: drop height 1573 mm

The anti-shock flooring FunShock 45

HIC 1000: drop height 1950 mm

Viale Lombardia 20 - 20021 Bollate (MILANO) - ITALYTel. +39.2.383301 - Fax +39.2.3503940

CERTIFICATO DI CONFORMITÀTYPE APPROVAL CERTIFICATE

Fabbricato da: Manufactured by

è conforme aare found to comply with

Il Responsabile del Centro Managing Director

Dott. Ing. P. Cau

Data / Date10/12/2007

Registrazione n.°1012/07Registration number

si certifica chethis is to certify that

UNI EN 1177HIC 1000: altezza di caduta 2553 mm

FUNPLAY s.r.l.Via Fontana, 25

20122 Milano (MI)

Visto il rapporto di prova CSI n. 0038a/ME/MCR/07 del 10/12/2007Referring to the CSI test report n . 0038a/ME/MCR/07 dated 10/12/2007

Pavimento antitrauma FunShock 70The anti-shock flooring FunShock 70

HIC 1000: drop height 2553 mm

The anti-shock flooring FunShock 100

Certifications Profile

Atossic Test

• EN 71/3• IPA

Test Report N. 529/08

Date received:Starting test:End test date:Sampling date:

Sample type: Samples of different originSample description: Green EPDM rubber granuleSample procedure: Sample delivered by the customer

Parameters Units Value Limits Analytical Method

Test Report N. 529/08

*Test is non accredited by SINAL

Uncertianty values were calculated using a coverage factor equal to the Student’s t at 95% probability and 7 degrees of freedom (2,36)

Analysis conducted on the sample, were carried out with suitable equipment that is regularly subjected to calibration and maintenance. The documentation for these controls is available in our laboratory.The test results relate only to the sample tested;SINAL is not responsible for the results of analytical and compliance statements produced by the laboratory.The test report is valid only if reproduced in its entirety, and its partial reproduction has to be approved in writing by the Laboratory.