Function Keys, Grid, Snap, Limits1 Function Keys, Grid, Snap Limits Sacramento City College EDT 310.

Function Keys, Grid, Snap, Limits 1

Function Keys, Grid, SnapFunction Keys, Grid, SnapLimitsLimits

Sacramento City CollegeEDT 310


Material to CoverMaterial to Cover Selecting AutoCAD Commands Function Keys Drawing with keyboard coordinates LINE command ID command OSNAP settings LIMITS UNITS SNAP GRID and ORTHO


Selecting AutoCAD CommandsSelecting AutoCAD Commands


Selecting AutoCAD CommandsSelecting AutoCAD Commands Commands may be selected in four

ways 1. Executed by picking a toolbar button or

icon

2. Selected from one of the pull-down menus

3. Selected from the digitizer table menu overlay

4. Typed at the keyboard


Selecting AutoCAD CommandsSelecting AutoCAD Commands Command Line Editing

You can select previously used commands by using the up and down arrow keys

This capability allows for fast, repeated use of the same command. Just hit the “up” arrow to recall the

command.


KeysKeys

7

The [Enter] key and the [Spacebar]The [Enter] key and the [Spacebar]

Function Keys, Grid, Snap, Limits


The [Enter] key and the [Spacebar]The [Enter] key and the [Spacebar] The [Spacebar] functions (most of

the time) like the [Enter] key.

A good habit is to use your left thumb as the [Enter] key.


KeysKeys The [Esc] key Control Keys Function Keys


KeysKeys The [Esc] key

Cancels a command and returns to the Command: prompt


KeysKeys Control Keys

Control functions are activated by pressing and holding the [Ctrl] key while pressing a second key.


KeysKeys Ctrl B - Snap mode (toggle) Ctrl C - Copy Ctrl D - coordinate display on/off toggle Ctrl E - crosshairs in isoplane toggle

(left/right/top) Ctrl G - Grid on/off toggle Ctrl H - same as backspace Ctrl K - PICKADD system variable toggle Ctrl L - Ortho mode toggle Ctrl O - Open


KeysKeys Ctrl P - Print (Plot) Ctrl R - toggle viewport Ctrl S - Save Ctrl T - Tablet mode toggle Ctrl V - Paste Ctrl X - Cut Ctrl Y - Redo Ctrl Z - Undo


Drawing AidsDrawing Aids


Drawing AidsDrawing Aids AutoCAD provides drawing aids that

help prepare the drawing layout, increase speed and efficiency and ensure accuracy. GRID SNAP ORTHO


The GRIDThe GRID


The GRIDThe GRID A grid is a predefined spacing of points

which is used to help lay out a drawing

The GRID command places this pattern of dots at any desired spacing. It can be equal or non-equal spacing The grid pattern shows only within the

drawing limits Entering the GRID command provides a

prompt showing the default grid spacing and several other options.


The GRID Command The GRID Command

The GRIDThe GRID GRID

Is a COMMAND and a TOGGLE

Command Displays a grid pattern in the current

viewport.

Toggle Turns the display of the grid pattern in the

current viewport ON or OFF.



Grid SettingsRight-click GRID button


GRID CommandGRID Command GRID can also be set by using the

Command: prompt. More tedious to use than right-clicking GRID on

Status Bar. Command: GRID Grid spacing (X) or ON/OFF/Snap/Aspect

<0.5…): 0.25


GRID CommandGRID Command GRID on or off:

Click the GRID button on the Status Bar or

The [F7] function key or

[Ctrl + [G]


GRID Command – Aspect OptionGRID Command – Aspect Option Aspect Option

Setting a different horizontal/vertical grid spacing can be done.

Type a different X, Y value.

From the Command: prompt Select the Aspect option of the GRID

command.


GRID Command – Aspect OptionGRID Command – Aspect Option Command: GRID Grid spacing (X) or

ON/OFF/Snap/Aspect<current>: A Horizontal spacing (X) <0.5000>: 1 Vertical spacing (Y) <0.5000>: .5


The SNAP CommandThe SNAP Command

The SNAPThe SNAP SNAP

Is a COMMAND and a TOGGLE

Command Restricts cursor movement to specified

intervals.

Toggle Turns the SNAP action ON or OFF.



SNAPSNAP The cursor crosshairs move freely on

the screen It may be difficult to accurately place a

point It would be desirable to cause the

cursor to move only to an invisible grid.

This is called “SNAP”. Very useful Makes drawing much easier and more

accurate


SNAPSNAP Snap grid or snap resolution

controls the movement of the cross-hairs to this invisible grid.

It can be set to a different value than the GRID command.

The two commands SNAP and GRID are generally used together.


The SNAP Command The SNAP Command


The SNAP CommandThe SNAP Command Properly setting the Snap Grid can

greatly increase your drawing speed.

The SNAP command is used to set the invisible snap grid.

SNAP SettingsRight-click SNAP button


The SNAP CommandThe SNAP Command Setting SNAP can also be done at the

Command: prompt Command: SNAP Snap spacing or

ON/OFF/Aspect/Rotate/Style <current>

Pressing [Enter] accepts the value shown in brackets. If a different spacing is required, such as

0.25, enter the new value.


The SNAP CommandThe SNAP Command Command: SNAP

Snap spacing or ON/OFF/Aspect/Rotate/Style <current>: 0.25

This sets up snap at 0.25


Rotating the SNAP GridRotating the SNAP Grid


Rotating the SNAP GridRotating the SNAP Grid The normal snap grid is horizontal

rows and vertical columns.

The grid can be rotated using the Rotate option of the SNAP command.

Command: SNAPSnap spacing or ON/OFF/Aspect/Rotate/Style

<current>: RBasepoint <0.0000,0.000>:(press [Enter], type a

new coordinate value, or pick a new base point.Rotation angle <0>: 25


Setting the SNAP StyleSetting the SNAP Style The Style option of the SNAP

command allows you to set the snap grid to either a Standard (default) or Isometric pattern.

Command: SNAP Snap spacing or

ON/OFF/Aspect/Rotate/Style <current>: S Standard/Isometric <current> S


Setting Grid Spacing Relative To SNAP SpacingSetting Grid Spacing Relative To SNAP Spacing

The visible grid can be set to be the same as the invisible snap grid.

Choose the Snap option of the GRID command.


Setting Grid Spacing Relative To SNAP SpacingSetting Grid Spacing Relative To SNAP Spacing

Command: GRID Grid spacing or ON/OFF/Aspect

<current>: 2x

In this case the GRID spacing would be 2x the SNAP setting.


LimitsLimits


The AutoCAD Drawing Area The AutoCAD Drawing Area The AutoCAD drawing area is

basically INFINITE in all directions.

Think “outer space”

It is beneficial to “define a drawing area” that represents the size of your project.

LIMITS are the extent of the drawing area.


The AutoCAD Drawing Area The AutoCAD Drawing Area LIMITS allow you to define a

reasonable drawing area.

This area can be turned On Off

You can draw outside the area when LIMITS is turned off.


LimitsLimits LIMITS are the extent of the drawing

area.

If you wanted a 17” x 11” drawing area, you would set the LIMITS to 17, 11. The first number is the horizontal

dimension. The second number is the vertical

dimension.


LimitsLimits LIMITS can be turned ON or OFF.

To set LIMITS, enter "LIMITS" at the Command: prompt.

AutoCAD restricts you from drawing outside the area defined by the LIMITS when the LIMTS are ON


LimitsLimits If you wanted an 11” x 8.5” drawing

area, you would set the LIMITS to 11, 8.5. The first number is the horizontal

dimension (X dimension) The second number is the vertical

dimension (Y dimension)


The “ORTHO” ModeThe “ORTHO” Mode


The ORTHO ModeThe ORTHO Mode The term ORTHO comes from the

word “orthogonal”, which means at “at right angles”.

The ORTHO mode restricts the cursor movement to the X, Y plane ONLY.


The ORTHO ModeThe ORTHO Mode Turn ORTHO mode on or off with

The F8 key. The Cntrl L key combination.

Function Keys, Grid, Snap, Limits1 Function Keys, Grid, Snap Limits Sacramento City College EDT 310.

Documents

Transcript of Function Keys, Grid, Snap, Limits1 Function Keys, Grid, Snap Limits Sacramento City College EDT 310.