Full Synthetic 0W-30 - Nulon Products Australia€¦ · Viscosity @ 40°C (cSt) ASTM D445 49.25...
Transcript of Full Synthetic 0W-30 - Nulon Products Australia€¦ · Viscosity @ 40°C (cSt) ASTM D445 49.25...
Part No Pack Size Barcode Carton QTY
SYND0W30-SIX 6 litre 9311090004900 3
SYND0W30-10 10 litre 9311090004917 6
Nulon Products Australia Pty Ltd 17 Yulong Close, Moorebank NSW 2170Web: www.nulon.com.auAUS info line: 1800 679 922NZ info line: 0800 454 108
Australian Made & Owned
Full Synthetic 0W-30 C2 Fuel Saving Diesel Engine Oil
Nulon Full Synthetic 0W-30 C2 Fuel Saving Diesel Engine Oil provides the maximum protection and performance from cold start to high operating emperatures. The fuel saving, low viscosity formula ensures optimum engine performance for all technically advanced passenger and light commercial diesel engines.
Nulon Full Synthetic 0W-30 C2 Fuel Saving Diesel Engine Oil contains Molybdenum Dithiocarbamate (Moly DTc). Moly DTc is scientifically proven to dramatically reduce friction and provide improved protection against engine wear from cold start to extreme temperatures, ensuring your vehicle is performing how it was designed to.
Benefits• Contains Moly DTc for reduced friction and improved
protection• Suitable for vehicles with and without Diesel
Particulate Filters (DPF)• Promotes superior fuel economy and engine eciency• Contains the very latest industry additive technology• Ultimate protection over longer drain intervals• Provides excellent engine cleanliness
NOTE: Not recommended for heavy-duty diesel engines. Refer to your vehicle service manual for correct lubrication requirements and service intervals.
Meets or exceeds the following oil industry specifications
European Constructors (ACEA) : C2
Society of Automotive Engineers (SAE) SAE 0W-30
Meets or exceeds these manufacturer’s specifications• FORD WSS-M2C950-A• PEUGEOT PSA B712290• PEUGEOT PSA B712312
Suitable for use in the following manufacturers vehicles• Alfa Romeo• Audi• Fiat• Ford• Jaguar• Land Rover• Range Rover• Peugeot• Skoda• Toyota• Volvo• Volkswagen
CAUTION: Avoid skin contact with used oil. Wear suitable gloves. If skin contact occurs, wash immediately with soap and water. Avoid prolonged and repeated contact with used oil. Protect the environment. Do not pollute drains, ground or water with used oil. Dispose of container as per EPA guidelines. Do not use this container for fuel or solvents.
Typical Properties:
SAE Viscosity Grade 0W-30
Viscosity @ 100°C (cSt) ASTM D445 9.93
Viscosity @ 40°C (cSt) ASTM D445 49.25
Apparent Viscosity by CCS @ -35°C (cP) ASTM 5293
5390
Apparent Viscosity by MRV @ -40°C (cP) ASTM 4684
21300
Viscosity Index ASTM D2270 194
Density @ 15°C (kg/L) ASTM D4052 0.8462
Sulphated Ash (weight %) ASTM D874 0.800
Total Base Number (mg KOH/g) ASTM D2896
7.97
Flash Point (°C) ASTM D92 >220Due to continued product research and development the information contained in this Product Bulletin is subject to change without notification.