Full range of stainless steel products

Surface protection is becoming increasingly important especially when making refrigeration systems in the food industry, where cleaning with strong cleaning agents is common.

Therefore Danfoss now offers both angle flow and straight flow versions of stainless steel components and valves up to size DN 65 mm.

Danfoss offers stop valves, stop check valves, check valves, filters, regulating valves and overflow valves to be used where there is a demand for stainless steel.

REFRIGERATION & AIR CONDITIONING DIVISION

MAKING MODERN LIVING POSSIBLE

A full range of stainless steel products for theindustrial refrigerationindustry

Produced by Danfoss AC-DSL 09.2006.MWADKRCI.PB.000.D1.02 / 520H1680

v Applicable to all common non flammable refrigerants including R717 and non-corrosive gases/liquids dependent on sealing material.

v Optional accessories:

Type Vented cap Handwheel

SVA-SS X X

SNV-SS X

REG-SS X

SCA-SS X

CHV-SS

FIA-SS

OFV-SS X

v Housing is made of special cold resistant stainless steel approved for low temperature operations.

v Designed to give favorable flow conditions.

v Internal back seating enables replacement of the spindle seal whilst the valve is active, i.e. under pressure (SVA-SS, REG-SS, SCA-SS, OFV-SS).

v Max. operating pressure: 52 bar g (Standard stainless steel components can be used for sub critical CO2 installations).

v Temperature range: –60/+150°C (–76 +302°F).

v Compact and light valves for easy handling and installation.

Features

v Stop valves Type SVA-SS DN 15 mm (½ in.) to DN 65 mm (2½ in.)

v Stop needle valves Type SNV-SS G½ in. with 50 mm and 150 mm welding branches

v Hand regulating valves Type REG-SS DN 15 mm (½ in.) to DN 40 mm (1½ in.)

v Stop check valves Type SCA-SS DN 15 mm (½ in.) to DN 40 mm (1½ in.)

v Check valves Type CHV-SS DN 15 mm (½ in.) to DN 40 mm (1½ in.)

v Filters Type FIA-SS DN 15 mm (½ in.) to DN 65 mm (2½ in.)

v Overflow valves Type OFV-SS DN 20 mm (3/4 in.) and DN 25 mm (1 in.)

The range of stainless steel valvesDanfoss introduces a range of stainless steel Industrial refrigeration valves for special application requirements.

At the moment the valve range covers DN 15 mm (½ in.) to DN 65 mm (2 ½ in.).

All the valves are available in straight and angle flow versions and with butt weld connections.

Solenoid valves, flanges and accessories in stainless steelBeyond the above mentioned components Danfoss also supplies solenoid valves, flanges and accessories.

For further details please contact your local Danfoss sales company.

Danfoss A/S - Hasselager Factory - Stormosevej 10 - P.O. Box 60 - DK-8361 Hasselager - Tel.: +45 8738 9600 - Fax. +45 8628 0801 - www.danfoss.com - e-mail: dkacd@danfoss.com