FUJITSU MICROELECTRONICS LIMITED · ©2008 FUJITSU MICROELECTRONICS LIMITED Printed in Japan...
Transcript of FUJITSU MICROELECTRONICS LIMITED · ©2008 FUJITSU MICROELECTRONICS LIMITED Printed in Japan...
FUJITSU MICROELECTRONICS LIMITEDShinjuku Dai-Ichi Seimei Bldg., 7-1, Nishishinjuku 2-chome,Shinjuku-ku, Tokyo 163-0722, JapanTel: +81-3-5322-3347 Fax: +81-3-5322-3387http://jp.fujitsu.com/fml/en/
For further information please contact:
North and South AmericaFUJITSU MICROELECTRONICS AMERICA, INC.1250 E. Arques Avenue, M/S 333,Sunnyvale, CA 94085-5401, U.S.A.Tel: +1-408-737-5600 Fax: +1-408-737-5999http://www.fma.fujitsu.com/
EuropeFUJITSU MICROELECTRONICS EUROPE GmbHPittlerstrasse 47, 63225 Langen, GermanyTel: +49-6103-690-0 Fax: +49-6103-690-122http://emea.fujitsu.com/microelectronics/
KoreaFUJITSU MICROELECTRONICS KOREA LTD.206 Kosmo Tower Building, 1002 Daechi-Dong,Gangnam-Gu, Seoul 135-280, Republic of KoreaTel: +82-2-3484-7100 Fax: +82-2-3484-7111http://kr.fujitsu.com/fmk/
Asia Pacifi cFUJITSU MICROELECTRONICS ASIA PTE. LTD.151 Lorong Chuan, #05-08 New Tech Park 556741 SingaporeTel : +65-6281-0770 Fax : +65-6281-0220http://www.fujitsu.com/sg/services/micro/semiconductor/
FUJITSU MICROELECTRONICS SHANGHAI CO., LTD.Rm. 3102, Bund Center, No.222 Yan An Road (E),Shanghai 200002, ChinaTel : +86-21-6146-3688 Fax : +86-21-6335-1605http://cn.fujitsu.com/fmc/
FUJITSU MICROELECTRONICS PACIFIC ASIA LTD.10/F., World Commerce Centre, 11 Canton Road,Tsimshatsui, Kowloon, Hong KongTel : +852-2377-0226 Fax : +852-2376-3269http://cn.fujitsu.com/fmc/en/
Specifi cations are subject to change without notice. For further information please contact each offi ce.
All Rights Reserved.The contents of this document are subject to change without notice.Customers are advised to consult with sales representatives before ordering.The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MICROELECTRONICS device; FUJITSU MICROELECTRONICS does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MICROELECTRONICS assumes no liability for any damages whatsoever arising out of the use of the information.Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MICROELECTRONICS or any third party or does FUJITSU MICROELECTRONICS warrant non-infringement of any third-party's intellectual property right or other right by using such information.FUJITSU MICROELECTRONICS assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein.The products described in this document are designed, developed and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general offi ce use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft fl ight control, air traffi c control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artifi cial satellite).Please note that FUJITSU MICROELECTRONICS will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fi re protection, and prevention of over-current levels and other abnormal operating conditions.Exportation/release of any products described in this document may require necessary procedures in accordance with the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.The company names and brand names herein are the trademarks or registered trademarks of their respective owners.
©2008 FUJITSU MICROELECTRONICS LIMITED Printed in JapanAD07-00046-3E August, 2008Edited: Business & Media Promotion Dept.
MICROCONTROLLER
August 2008
FUJITSU MICROELECTRONICS
Fujitsu Microcontrollers - AssistingFujitsu Microcontrollers - Assisting customerscustomers with "Technology", "Delivery", andwith "Technology", "Delivery", and "Quality""Quality"Delivering products that meet the needs of our customers and assisting the business of our customers by offering cutting edge technology, stable supply capabilities, and high reliability through rigorous quality management.
Technology
DeliveryDelivery
Contributing to the development of highly value-added systems with the No. 1 technical capabilities in NOR Flash
100,000 rewrites guaranteed20-years data retention guaranteedDual operation functionRead/write and erase protection function
Delivering high quality products with outstanding consistency
Increased production capabilitiesMeeting the needs of small volumes of many partsTAT reduction in development timeHandling risk dispersion through multi-Fab
QualityQualityOffering high reliability through rigorous quality management
Rigorous quality management and production reformsApplying 3ZZero-DefectZero-Queue TimeZero-EmissionsAchieved a failure rate of 0ppm in medium-scale Flash microcontrollers (July 2006)
Features of Fujitsu Microcontrollers p2-3
32-bit Core p4-7
16-bit Core p8-11
8-bit Core p12-15
Product Selection by Application p16-17
Functionality Built-in CAN microcontrollers p18-20 Built-in FlexRay microcontrollers p21 Built-in USB microcontrollers p22-23 Built-in LCD/VFD controller microcontrollers p24-25 Microcontrollers for Inverter Control p26-27
Development assistance Tools Software Tools p28-29 Hardware Tools p30-33 Evaluation Board p34-35 Development Environment / OS / Middleware / Tools p36-37 Writing Programs p38-39
Product Selection p40-60
CONTENTS
2 3Fujitsu microcontrollersFujitsu microcontrollers
Features of Fujitsu Microcontrollers
Series Features
All products have built-in high reliability fl ash memory
Guaranteed rewrites: Standard 10,000 times (separate guaranteed 100,000 times)Built-in "Dual Operation Flash" that can be rewritten during program executionSupports low leakage current and low power consumption, covering automotive qualityUse lead-free packages that comply with the RoHS directive (Guaranteed operating temperature: Standard product -40 to +85°C, automotive -40 to +125°C)
Products equipped with Dual Operation Flash
FR 80-32bit RISC-
FR 60/FR 60Lite-32bit RISC-
FF22MC-16FXMC-16FX-16bit CISC--16bit CISC-
FF22MC-16LXMC-16LX-16bit CISC--16bit CISC-
FF22MC-8FXMC-8FX-8bit CISC--8bit CISC-
FF22MC-8LMC-8L-8bit CISC--8bit CISC-
20 28/32 48/52 64 80 100 120 144 176 208 320Package (number of pins)
CPU Lineup
4K 32K 64K 128K 256K 384K 512K 786K 1024K 2112K
100M
56M
25M
4M
CP
U C
lock
Fre
quen
cy (
Hz)
ROM Capacity (Bytes)
FR FamilyFR Family
FF22MC-16FXMC-16FX
FF22MC-16LXMC-16LX
FF22MC-8FXMC-8FXFF22MC-8LMC-8L
Package: 64 pins to 320 pinsROM: 64 KB to 2112 KB + ROM-lessClock: 25 MHz to 100 MHz
Package: 64 pins to 144 pinsROM: 288 KB to 576 KBClock: 56 MHz
Package: 48 pins to 144 pinsROM: 24 KB to 512 KB + ROM-lessClock: 16 MHz to 33 MHz Package: 28 pins to 100 pins
ROM: 32 KB to 60 KBClock: 16 MHz
Package: 28 pins to 100 pinsROM: 4 KB to 60 KBClock: 4.2 MHz to 12.5 MHz
Flash Features
Overview of Dual Operation Flash Function (64 KB)
Dual Operation Flash
• Freely able to program other Flash banks while executing
a program.
• Can replace E2PROM
Flash reliability
• Guaranteed rewrites: Standard 10,000 times (separate
guaranteed 100,000)
• Data retention period: 20 years (Ta = +85°C)
• Operating temperature range: Ta = -40°C to +85°C
(Can be certifi ed for Ta = 105°C, 125°C support)
Dual Operation FlashDual Operation Flash
RAM/RAM/Register DataRegister Data
Event and backup data,
etc.
Upper bank program code storage regionUpper bank program code storage region
4KB4KB4KB4KB16KB16KB
4KB4KB4KB4KB
Lower bank data storage regionLower bank data storage region
Number of rewrites (compared to other companies) Number of rewrites (compared to other companies)
1,000 10,000 100,000
Other companies
Fujitsu Microelectronics
20 years
10 years
20 20 yearsyears
Guaranteed Guaranteed 100,000 100,000 rewritesrewrites
Reliability
3Z activities to improve reliability
Promotion of 3Z activities at the present level
• Quality: Zero-Defect Reform activities to improve delivered quality
• Delivery: Zero-Queue Time Reduced time reform activities to ensure reliable delivery
• Environment: Zero-Emission Reform activities to reduce waster during production to zero
3Z Activity Promotion of Manufacturing
ZERO-Queue Time
ZERO-Defect
ZERO-Emission
Quality
Delivery Cost
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Program code storage region
48KB
Data storage region16KB
Write RAM/Register data to the Flash at a fi xed period.
Replace E2PROM
Other companies Fujitsu Microelectronics
1,000 rewrites
4 5
32 bit Core
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
The FR family is a 32-bit RISC controller with a unique Fujitsu architecture designed for optimal functions for embedded control applications. These microcontrollers are widely used in fields such as digitial home electronics, PC peripherals, and vehicles, and are the optimal microcontrollers for applications that demand high speed computer processing functions.
FR CPU Features■
Product selection: P40
High-performance 32-bit RISC microcontrollerHigh-speed operation using 5-stage pipeline processingParallelization of processing by separation of the instruction,
data, and resource buses
Low power consumption operationDelivering low clock rates by high unit performance functions through increased MIPS valueThe operating frequencies of each of the CPU, built-in peripheral function, and external bus can be confi gured
separately to suit the customer system
Instruction set optimized for embedded applicationsDelivering compact object sizes with 16-bit instruction lengthA variety of bit processing instructions and addressing instructionsDelayed-branch instructions (reduces branch processing overhead)
●1)2)
●1)
2)
●1)2)3)
FR80 Features■Built-in high-performance FR80 coreCPU performance increased by more than 30% over the FR60 core
Inherits the instruction set from existing FR
Built-in 8 channel DMACCapable of highly effi cient data transfer to reduce CPU load
Crossbar switch busInstructions in Flash memory and data in RAM can be accessed simultaneouslyEven while the CPU is accessing instructions in Flash
memory, the DMAC can access data in RAM
Multilayer busData can be transferred by DMAC at the same time that CPU instructions are executedExample) CPU External bus DMAC Peripheral bus
●
●
●•
•
●•
New product lineup (FR80/T series)■Lineup includes a wide range of memory and pin countsSupports a wide range of models to suit customer applications
Built-in high-speed A/D converter (conversion time: approx. 1.2 µs*)FR80/T1 series (144/176 pin models) have built-in 2 unit, 32 channels (Supports simultaneous conversion)Supports continuous A/D conversion with built-in 16-stage FIFO
Built-in multichannel serial interface (maximum 12 channnels)Able to support a variety of serial interfaces (SPI/UART/I2C mode)4 channels equipped with 16-byte receive FIFO and 16-byte transmit FIFO
Maximum of 26 pins with 5V withstand voltageCan be connected to 5V peripheral I/O output ports without a level shifter
Lineup includes products supporting USB full-speedProduct with built-in Function and Mini-Host
Varies depending on the operating frequency and external circuit conditions.
●
●
●
●
●
*
FR Family Lineup■Built-in PLL clock circuitCan be set to a maximum of 20 times multiplication (for products guaranteed for an 80 MHz operating frequency)
Built-in DMAC and multiply and accumulate circuit that can operate in parallel with CPU processing*
Built-in cache memory focusing on ROM less products*
Lineup of a wide variety of Flash memory microcontrollersMaximum 2MB built-in Flash memory*
Wide range of peripheral functions*USB (Function, Mini-Host, Full-Host), FlexRay, MediaLB,
CAN, SPI, 12-bit A/D
Check with the product selection for supported products.
●
●
●
●
●
*
Built-in instruction cache
External instruction cache
FR60To 50MHz Operation
FR60 LiteTo 33MHz Operation
FR60To 80MHz Operation
FR60To 50MHz Operation
FR80ETo 133MHz Operation
FR80STo 80MHz Operation
FR80To 200MHz Operation
FR80To 133MHz Operation
High-speed processingRobust bus access
•
•
Multi-function serial interface (UART, SIO, I2C)Robust bus access
•
•
Low power consumptionLow noiseLow leakage process
Low power consumption
•••
•
Built-in programmable peripheralsHigh performance ADC supportSuper-low leakage processOn-chip debugger supportBuilt-in FRAM
Increased processing speed by CPU architectural improvements (pipeline improvement)
•••••
•
Improved performance by single operating frequency of FR + MPU/FR + FPUImproved exception system functions
•
Low power consumption•
200M
133M
80M
50M
33M
CP
U C
lock
Fre
qu
ency
(H
z)
32-bit CPU Roadmap
FR80 CPU Core
Crossbar switch bus
Mutlilayer bus
Flash RAM
Bus interface
IP macro (Example: USB macro)
External bus interface
Peripheral bus interface
Timer
DMAC
Peripheral bus
On-chip bus
DataInstruction
Layer#1
Layer#2
CPU: Exclusive accessDMAC: Exclusive access
Under development Planned MB91FXXX
In planning
MB91F6YY-31MB/64KB
MB91V650Common evaluation chip
MB91F647512KB/48KB
MB91F6441MB/64KB
MB91F6391MB/64KB
MB91F637512KB/48KB
MB91F662512KB/48KB
MB91F6ZZ-2512KB/32KB
FR80/T1 Series
FR80/T2 Series
144pin
176pin
144pin
176pin
120pin 120pin
CPU: 60MHz
USB Function/Mini-Host OSDC
CPU: 33MHz CPU: 33MHz
Multi-function lineupMulti-function lineup
High-speed High-speed processing lineupprocessing lineup
Employs 90 nm technology
Increased CPU performance version that employs high-speed FlashCPU: 66MHz
Per
form
ance
CAN
USB
LCD
Inverter
Standard product
ROM-less product
64pin 100pin 120pin 144pin 176pin 208pin 320pin
ROM-less products: Product name Other products: Series name
MB91460
MB91265
MB91230
MB91660 MB91310
MB91470
MB91350MB91F313
MB91460 MB91460MB91460MB91270MB91210
MB91480MB91260
MB91460MB91360
MB91460MB91245MB91220MB91210
MB91460MB91360
MB91305MB91319
MB91640/645MB91350
MB91635MB91150MB91130
MB91345
MB91101MB91307MB91121MB91107
MB91151 MB91302
MB91461MB91605
Note: There are many other product planned for development
Fujitsu microcontrollersFujitsu microcontrollers
6 7
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Wide Lineup of Pin Counts and ROM Sizes
Number of pins
ROM [Byte]64pin 100pin 120pin 144pin 176pin 208pin 320pin
Number of pins
ROM [Byte]
2112K [RAM(Byte)]Product name: Flash ROM productProduct name: MASK ROM product
[96K] MB91F469G 2112K
1088K [40K] MB91F467B [64K] MB91F467R [64K] MB91F467DB 1088K
1024K [32K] MB91F346B [48K] MB91F318R 1024K
1000K [64K] MB91F639 1000K
544K[32K] MB91F465X [32K] MB91F314 MB91F314A
[16K] MB91F465KB
[40K] MB91F465BB
[24K] MB91F213 MB91213544K
512K
[32K] MB91F345B
[32K] MB91F487
[24K] MB91F273
[24K] MB91F278
[48K] MB91F662
[24K] MB91F353A
[24K] MB91F355A MB91F357A
[24K] MB91353A MB91355A
[32K] MB91479
[24K] MB91F249
[16K] MB91F223
[16K] MB91F312A
[48K] MB91F647
[32K] MB91316A
[24K] MB91F355A
[24K] MB91355A
512K
510K [14K] MB91F128 [8K] MB91F158 [34K] MB91F155A MB91155 510K
416K [16K] MB91F464AA 416K
384K[24K] MB91351A
[16K] MB91352A MB91354A
[24K] MB91F478
[22K] MB91154
[16K] MB91354A384K
288K [16K] MB91F211 288K
256K
[16K] MB91482
[14K] MB91F127
[10K] MB91F272 MB91F277
[8K] MB91F264B MB91264B
[24K] MB91F356B
[16K] MB91F233
[16K] MB91F233L
[16K] MB91233
[16K] MB91F248
[16K] MB91F475
[16K] MB91248
[24K] MB91F356B
256K
254K [8K] MB91F133 MB91133 254K
128K[4K] MB91F267A
[4K] MB91F267NA
[8K] MB91263B128K
64K [2K] MB91266A 64K
ROM-less
[2K] MB91101A [160K] MB91108
[128K] MB91107 MB91307B MB91307R
[64K] MB91306R
[34K] MB91151A
[4K] MB91302A
[4K] MB91302A-010/020
[64K] MB91305
[64K] MB91461 ROM-less
Lead pitch(mm)
0.4
Package nameD×W×H(mm)
TQFP-100P12×12×1.5
LQFP-120P14×14×1.5
LQFP-144P16×16×1.5
Lead pitch(mm)
0.4
0.5
LQFP-100P14×14×1.5
LQFP-120P16×16×1.5
LQFP-144P20×20×1.5
LQFP-176P24×24×1.5
LQFP-208P28×28×1.5
0.5
0.65
LQFP-64P12×12×1.5
QFP-100P14×20×3.0
QFP-144P28×28×3.65
0.65
0.80
FBGA-144P12×12×1.25
FBGA-320P18×18×1.25
0.80
Dual Operation Flash New product Development product Paper device
Fujitsu microcontrollersFujitsu microcontrollers
8 9
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
16 bit Core
The F2MC-16FX family is an original Fujitsu 16-bit microcontroller. A wide variety of products are available, from automotive products that support CAN networks to systems controllers and subcontrollers for audio visual equipment, whitegoods, office equipment, and industrial equipment. The F2MC-16FX family are the optimal microcontrollers for next-generation systems.
Product selection: P44
F2MC-16FX CPU Features■
CPU operating frequency: Up to 56 MHzMinimum instruction execution time: 17.8 ns
Basic instructions execute in one cycleExample) Multiplication (16-bit x 16-bit) - 4 cycles (16LX: 11 cycles) Division (16-bit ÷ 8-bit) - 9 cycles (16LX: 15 cycles)
High-speed processing using a 5-stage pipeline and instruction queue (8 Bytes)
High-speed interruptsInterrupt handling time (start time): 10 cycles (16LX: 24 cycles)One interrupt source allocated to one vector
High-performance interruptsNMI pin function activation and input level are confi gurableVector table area can be located in ROM, RAM, or external memory
Built-in CR clock modeSelectable operating frequency from 100 kHz (low speed) and 2 MHz (high speed)
●
●
●
●
●
●
Product Lineup (F2MC-16FX Family)■
Lineup of series that are easy to choose to suit the application
Built-in CAN products (Single CAN to Triple CAN)Built-in USB Full-Speed products (Support Function and Mini-Host*)
Support 3.0 V to 5.5 V system power supplies
A development environment is available that is common to all 16FX
Common evaluation device
Mini-Host: A host function that supports Hub and Isochronous functions. OTG is not supported.
●
•
•
●
●
•
*
F2MC-16LX CPU Features■
Built-in PLL clock circuitHigh-speed processing with operating frequencies up to 33 MHz
Wide variety of communication functionsUSB (Full-Speed Function, Mini-Host*), CAN, UART, SIO, I2C
Various clock gear settings using PLL division functionHighly effi cient power management by low-speed clock with high-speed operation PLL and frequency division function (indicates the clock gearing.)
Lineup includes a wide range of products from 48 pins to 144 pins
Lineup includes a wide range of products that support an external bus
Program patch function (achieves zero faulty MASK products in production)
●
●
●
●
●
●
MB90880 Series Features■Multifunction serial interface
Serial interface that supports 4 communication schemesThe operating mode of each channel can be selected by software
Base timerTimer that supports 4 operating modesThe operating mode of each channel can be selected by software
Pins supporting 5 V withstand voltage: 11 pinsAble to support 5 V interfaces by connecting 5 V pull-up resistors to the Nch open drain pins
Multichannel A/D input channels (20 channels)Optimized for systems equipped with many sensors with analog outputsSupports additional key input processing by increasing system performance
●••
●••
●•
●•
•
Product selection: P44
F2MC-16LXTo 25MHz Operation
Support for even higher CPU speeds•64M
33M
25M
CP
U C
lock
Fre
qu
ency
(H
z)
16-bit CPU roadmap
F2MC-16LXTo 33MHz Operation
F2MC-16FX(Next Generation)
Increased transfer speed of simple DMA transfersFully featured CAN microcontroller lineupWorld's fi rst commercial Dual Operation Flash microcontroller
•••
Built-in programmable peripheralsMultifunction serial interface (UART, SIO, I2C)Base timer (ICU, PPG, PWC, reload timer)
•
Increased CPU speed by technological advancementsReduced power consumption
•
•
CPU pipeliningOn-chip debugging supportOn-chip OSC
•••
F2MC-16FX Current ConsumptionSame frequency:
Operating at 24 MHzSame performance: Operating at 4 MIPS
■ Peripherals
■ CPU & Memory
■ Peripherals
■ CPU & Memory
50%OFF!50%OFF!75%OFF!75%OFF!
MB90340@24MHz 16FX@24MHz 16FX@24/8MHz MB90340(16LX) MB96330(16FX)
60
50
40
30
20
10
0
60
50
40
30
20
10
0
ICC
[mA
]
ICC
[mA
]
The current consumption of the 16FX is approximately 1/2 that of the 16LX when compared at the same operating frequency (24 MHz).
The current consumption of the 16FX is approximately 1/4 that of the 16LX when compared at the same operating performance (4 MIPS).
Low power consumption operation by CR oscillator clockLow power consumption operation is possible by using the built-in CR oscillator clock for the system wake-up signal.
Main clock mode
CR Clock/CR Sleep/CR Timer Mode* Can select from 2 MHz or 100 kHz by register settings.
10ms 10ms 10ms 10ms
Curre
nt c
onsu
mpt
ion
Time
TripleCAN
(32messagebuffer)
32pin
MB963xx*
48pin 64pin 80pin 100pin 120pin 144pin 416pin
DoubleCAN
(32messagebuffer)
SingleCAN
(32messagebuffer)
USB1ch
Standard product
MB96360* MB96390
MB96330U
MB96340A
MB96350 MB96320 MB96340 MB96380 MB96370*
MB96330*
Evaluation environment
common to all products
MB96V300BBGA-416
*:Currently in planning
CAN
MB90455
48pin 64pin 80pin 100pin 120pin 144pin
USB
VFD
LCD
Inverter
Standard product
3V products: Series name5V products: Series name
MB90570A
MB90520AMB90800 MB90370
MB90820
MB90335 MB90330
MB90390
MB90M405
MB90360MB90385MB90890
MB90350MB90495G
MB90460MB90560
MB90980MB90565
MB90470/480MB90880MB90435
MB90550AMB90587(MB90580C)
MB90860
MB90340MB90425G/GA
MB90440GMB90540G/545GMB90590G/595G
Mode Function/Feature
Asynchronous (UART)
Data: 7/8 bit; Stop: 1/2 bits; Parity; Supports LSB/MSB fi rst; Maximum baud rate: 4.125 Mbps (for 33 MHz CPU clock)
Multiprocessor mode: Supports asynchronous 1 to n (master to slave) communication, and supports bidirectional communication between master and slaves
Synchronous (SIO)
SPI support; Selectable internal/external clock; Maximum baud rate: 8.25 MHz (for 33 MHz CPU clock)
LIN Conforms to LIN protocol specifi cations; Can operate as master/slave
I2C Can operate as master/slave; Supports up to 400 kbps (for CPU clock of 8 MHz or more)
Mode Function/Feature
Reload timer Capable of event counting / toggle output
PWC Capable of pulse width measurement
PWM Event output by period/duty settings
PPG Event output by H width/L width settings
3V 5V 5VMB90880seriesNch open drain pin
Peripheral IC
Fujitsu microcontrollersFujitsu microcontrollers
10 11
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Wide Lineup of Pin Counts and ROM Sizes
Number of pins
ROM [Byte]48pin 64pin 80pin 100pin 120pin 144pin
Number of pins
ROM [Byte]
544K [RAM(Byte)]Product name: Flash ROM productProduct name: MASK ROM product
[24K] MB96F348 544K
512K [30K] MB90F884A MB90884 [20K] MB90F345E MB90F345CE 512K
416K [16K] MB96F387 416K
384K
[24K] MB90F489B
[24K] MB90F883A
[24K] MB90883
[16K] MB90F946A
[8K] MB90F591G
[8K] MB90591G
[24K] MB90F334A
[10K] MB90F394HA MB90394HA 384K
288K [12K] MB96F356 [12K] MB96F326 288K
256K
[16K] MB90F342E MB90F342CE MB90F349E
[16K] MB90F349CE MB90F804 MB90F882
[16K] MB90342E MB90342CE MB90349CE MB90349E
[16K] MB90483C MB90882
[12K] MB90F949A
[10K] MB90F488B MB90488B
[8K] MB90F546G
[6K] MB90F439 MB90F482B MB90F549G
[6K] MB90F584CA MB90F594G MB90594G
[6K] MB90549G MB90439
[16K] MB90333A
[10K] MB90F574C
[10K] MB90F922NA
[10K] MB90574C
256K
192K [12K] MB90F983 [10K] MB90487B [4K] MB90F481B 192K
128K
[10K] MB90982
[4K] MB90F352E MB90F352TE
[4K] MB90F357E MB90F357TE
[4K] MB90F568 MB90352E MB90352TE
[4K] MB90357E MB90357TE MB90568
[2K] MB90F498G
[4K] MB90F823A
[4K] MB90823
[16K] MB90341E MB90341CE MB90347E MB90348E
[6K] MB90F347E MB90F347CE MB90F423GC
[6K] MB90F428GC MB90F443G MB90F543G
[6K] MB90F583CA MB90F867ES MB90F947A MB90347E
[6K] MB90347CE MB90423GC MB90428GC MB90443G
[6K] MB90543G MB90583CA MB90947A MB90867E
[4K] MB90F438L MB90F548G
[4K] MB90F548GL MB90F553A
[4K] MB90MF408A
[4K] MB90438L MB90548G MB90553B
[4K] MB90598G MB90803 MB90M408A
[2K] MB90802
[6K] MB90F523B
[6K] MB90523B
[6K] MB90573
[6K] MB90F378
128K
96K [4K] MB90567 [4K] MB90M407A 96K
64K
[3K] MB90F362E MB90F362TE MB90F367E MB90F367TE MB90F962
[3K] MB90362E MB90362TE MB90367E MB90367TE
[2K] MB90F387 MB90F457
[2K] MB90F897 MB90387 MB90457
[4K] MB90F337 MB90F351E MB90F351TE
[4K] MB90F356E MB90351E MB90351TE MB90356TE MB90337
[2K] MB90F462 MB90F497G MB90F562B
[2K] MB90462 MB90467 MB90497G MB90562A
[4K] MB90F822A
[4K] MB90822
[4K] MB90F822A MB90F927
[4K] MB90427GC
[4K] MB90587CA
[4K] MB90822
[2K] MB90F346E MB90F346CE
[2K] MB90346E MB90346CE
[2K] MB90437L MB90547G
[2K] MB90437LS MB90552B
[6K] MB90F372
64K
32K [2K] MB90F456 MB90456 [1K] MB90561A 32K
24K [2K] MB90F455 MB90455 24K
ROM-less [4K] MB90T553A [2K] MB90T552A ROM-less
Lead pitch(mm)
0.4Package nameD×W×H(mm)
LQFP-120P14×14×1.5
LQFP-144P16×16×1.5
Lead pitch(mm)
0.4
0.5
LQFP-48P7×7×1.5
LQFP-64P10×10×1.5
LQFP-80P12×12×1.5
LQFP-100P14×14×1.5
LQFP-120P16×16×1.5
QFP-120P20×20×3.53
0.5
0.65
LQFP-64P12×12×1.5
LQFP-80P14×14×1.5
QFP-100P14×20×3.0
0.65
0.8/1.0*
QFP-64P*14×20×3.0
QFP-80P14×20×3.05
0.8/1.0*
1.778SH-DIP-64P58.0×17.0×4.95
1.778
Dual Operation Flash New product Development product Paper device
Fujitsu microcontrollersFujitsu microcontrollers
12 13
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
8 bit Core
Product selection: P56
F2MC-8FX CPU Features■
The F2MC-8FX family is an original Fujitsu 8-bit microcontroller.These microcontrollers can be used in a wide range of applications and products, including system control of small domestic appliances and subsystem control of digital home appliances, automotive products, and factory automation equipment.
CPU operating frequency: Up to 16.25 MHz
Minimum instruction execution time: 61.5 ns
Offers a high-speed instruction execution cycleExample) Multiplication (8-bit x 8-bit) - 8 cycles Division (16-bit ÷ 16-bit) - 17 cycles
Interrupt levels: 4 levels
Clock control unit offers a wide range of operating frequenciesBuilt-in PLL multiplier circuit Main clock oscillator frequency ×1, ×2, ×2.5, ×4 Sub clock oscillator frequency ×2, ×3, ×4Built-in divider circuit Main clock oscillator frequency 1/2, 1/8, 1/16, 1/32 Sub clock oscillator frequency 1/2
●
●
●
●
Built-in PLL multiplier circuit (maximum 4 times multiplication)Capable of internal high-speed operation with external low-speed clock
●
●
Composite timer and serial communication function features■
Product lineup (F2MC-8FX family)■
F2MC-8L CPU Features■
Product selection: P56
"Composite timer" with user-selectable functionality● Serial communication function Supports both high speeds and low speeds
Available communication transfer rates
●
Lineup of series that are easy to choose to suit the application
Lineup of products from 28 to 100 pins (20 pin release planned)
Wide range of products with built-in LCD controllers and standard products
Support system power supplies of 1.8 to 5.5 V
Provides a development environment that is common to all 8FXProvides a common evaluation device
High quality Flash memoryUp to 10,000 rewritesData retention period: 20 years
●
●
●
●
●
Basic functions
Maximum external clock frequency 12.5 MHz (internal frequency division by 4)Built-in clock gear circuitSelectable from 1/4, 1/8, 1/16, and 1/64Standby mode offering low power consumption operationStrong noise reduction (EMI/EMS)Built-in fully-featured LCD controller
Peripheral functionsWide range of communication functions
USB (Full-Speed Function) LCD controller UART (with clock-synchronous mode) SIO
I2C (supports multitasking)
Inquire separately regarding development assistance tools.
●
•
•
•••
●•
Increased CPU speed by technological advancementsLow power consumption support
•
•
20M
16M
10M
3M
CP
U c
lock
fre
qu
ency
(H
z)
8-bit CPU roadmap
F2MC-8FX(Next Generation)
On-chip debugging supportOn-chip debugging supportBuilt-in programmable peripheralsBuilt-in programmable peripheralsMultifunction serial interface (UART, SIO, IMultifunction serial interface (UART, SIO, I22C)C)Base timer (ICU, PPG, PWC, reload timer)Base timer (ICU, PPG, PWC, reload timer)
••
F2MC-8FXTo 16.25MHz Operation
F2MC-8FXTo 10MHz Operation
F2MC-8LTo 3MHz Operation
Automotive-I/OAutomotive-I/OMonitor debugging supportMonitor debugging support
••
Family of 8-bit CPU products with an emphasis on performanceFamily of 8-bit CPU products with an emphasis on performanceEmploys low leakage processEmploys low leakage processDual Operation Flash/One Sector FlashDual Operation Flash/One Sector Flash1.8V operation at 5MHz (3V product)1.8V operation at 5MHz (3V product)
••••
MB89F202RAMB89F202RAMacro area reduction by Flash memory optimizationMacro area reduction by Flash memory optimization•
Support for even more CPU speed increasesStronger proposition for vehicle-mounted products
•
•
Hardware assisted reduced system power consumptionInterval counting of 125ms to 63sec (maximum) using a clock timer/clock counter implemented in hardware!
Note: This allows the power consumption of the system to be reduced, and is particularly optimal for mobile device power management applications
10MHz
Cur
rent
con
sum
ptio
n
Time
Pipelining of internal devices
F2MC-8FX family
Can perform instruction fetch and data access in one clock
F2MC-8L family (conventional 8-bit product)
Clock
Address
Data
Clock
Address,Data
A0 A1 A2 A3 A4
D0 D1 D2 D3
A0 D0 A1 D1 A2
10MHz 10MHz
Standby (maximum 63 sec)Standby (maximum 63 sec)
Standard operation (high-speed CPU execution)
Comparison of 8-bit microcontroller minimum instruction execution time with other companies
Company A(3V/5V)
Company B(3V/5V) Fujitsu F
2MC-8FX
Frequency divided by 4
4.2MHz
Frequency divided by 2
5MHz
Frequency divided by 2
10MHz
Frequency multiplied
by 2.510MHz
Frequency multiplied
by 216MHz
Source oscillator 16.8MHz
Source oscillator 10MHz
Source oscillator 4MHz
Source oscillator 20MHz
Source oscillator 8MHz
300
250
200
150
100
50
0
Min
imu
m in
stru
ctio
n
exec
uti
on
tim
e
PLL multiplier settings
4MHzPLL multiplier
circuit
32.768kHz
Frequency divider circuit
PLL multiplier circuit
Frequency divider circuit
Main PLL clock multiplier setting Sub PLL clock multiplier setting
Main clock × 1 Sub clock × 2
Main clock × 2 Sub clock × 3
Main clock × 2.5 Sub clock × 4
Main clock × 4 Divided by 2 (no multiplication)
Divided by 2 (no multiplication) —
Composite timer
Communication method UART Clock synchronous
Communication macro UART/SIO LIN-UART UART/SIO LIN-UART
Supported transfer rates
3800bpsto
2Mbps
960bpsto
3.2Mbps
3800bpsto
4Mbps
960bpsto
3.2Mbps
Data length 5 to 8bit 7, 8bit 5 to 8bit 7, 8bit
Other Stop bits: 1, 2 bits — —
PWM timer
Sets the period and L pulse width of a square wave, or the H pulse width at a fi xed period.
Interval timer
This function counts a fi xed interval.A square wave can also be output timed with the count.
PWC timer
Detects the rising and falling edges of input pulses, and can measure the H width/L width and period.
Input capture
Detects the rising and falling edges of input pulses, and saves the count value at those times.
Application 28/30pin 32pin 48/52pin 64pin 100pin 224pin
LCD
5Vproduct
MB95150M MB95160MB MB95120MB
Evaluation environment
common to all products
3Vproduct
MB95160 MB95120
Evaluation chip for 5V products
MB95FV100D-103
Standard product
5Vproduct
MB95130MB MB95110M MB95100AM
Evaluation chip for 3V products
MB95FV100D-101
3Vproduct
MB95140 MB95110B MB95100B
28pin 30pin 48pin 64pin 80pin 100pin
USB MB89051MB89580B/BW
I2C MB89960
MB89F969AMB89530C/HC/AC
MB89560C/HC/AC
UART MB89930A MB89470
MB89530/H/AMB89810AMB89630/RMB89660/R
MB89670A/AR
Inverter MB89850/R MB89860
DTMF MB89890
VFD MB89140
LCD MB89940
MB89480MB89980MB89950MB89180
MB89560/H/AMB89160/AMB89150/AMB89820MB89870MB89920
MB89550AMB89650AMB89800
Standard product
MB89190AMB89990
MB89130/A/LMB89120/A
MB89610RMB89620/R
MB89680
Fujitsu microcontrollersFujitsu microcontrollers
14 15
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Wide Lineup of Pin Counts and ROM Sizes
Number of pins
ROM [Byte]28pin 30pin 32pin 34pin 48pin 52pin 64pin 80pin 100pin
Number of pins
ROM [Byte]
60K
[RAM(Byte)]Product name: Flash ROM product/ OTP productProduct name: MASK ROM product
[2K] MB95F118B [2K] MB95F118B
[2K] MB95F118M
[2K] MB95F108AM
[2K] MB95F108B
[2K] MB95F168M
[2K] MB95108AM
[2K] MB95D108B
[2K] MB95F128
[2K] MB95F128MB
[2K] MB89F499
[2K] MB95128MB
60K
48K[2K] MB95117M [2K] MB89F538 MB89F538L
[2K] MB89538AC MB95107B MB95R107B
[1K] MB89P568
[1K] MB89P928
[2K] MB89P558A MB89P808
[2K] MB89498 MB89558A48K
32K
[1K] MB95F136MB
[1K] MB95136MB
[1K] MB95F146 [1K] MB95F156M
[1K] MB95116B
[1K] MB95156M
[1K] MB95F156M
[1K] MB95116B
[1K] MB95156M
[2K] MB89F051 MB89051
[1K] MB89P857 MB89W857
[1K] MB89P147 MB89537AC
[1K] MB89637R
[1K] MB89567AC [1K] MB89557A
32K
24K[768] MB89146
[768] MB89636R24K
16K
[256] MB89P195A
[256] MB89195A
[512] MB89P935B
[512] MB89935B
[512] MB89F202RA
[512] MB89202
[512] MB89F202RA
[512] MB89202
[512] MB89P945
[512] MB89P475
[512] MB89945
[512] MB89475
[1K] MB89P585B MB89P585BW
[1K] MB89585B MB89585BW
[512] MB89P485L
[512] MB89485L
[512] MB89855R
[512] MB89145
[512] MB89535A
[512] MB89635R
[512] MB89925
[256] MB89P825
[256] MB89825
[512] MB89805
16K
12K [256] MB89144A 12K
8K
[256] MB89193AH [512] MB89943 [512] MB89583B
[512] MB89583BW
[256] MB89143A
[256] MB89823R
[256] MB89923
[256] MB89803
8K
4K [128] MB89191AH [128] MB89821 4K
Lead pitch(mm)
0.4
Package nameD×W×H(mm) TQFP-100P
12×12×1.1
Lead pitch(mm)
0.4
0.5LQFP-48P7×7×1.5
BCC-48P7×7×0.75
LQFP-64P10×10×1.5
BCC-64P9×9×0.8
LQFP-80P12×12×1.5
LQFP-100P14×14×1.5
0.5
0.65SSOP-30P
5.6×9.7×1.25SSOP-34P
11×6.1×1.25LQFP-52P10×10×1.5
LQFP-64P12×12×1.5
LQFP-80P14×14×1.5
QFP-100P14×20×3.0
0.65
0.8/1.0*LQFP-32P7×7×1.5
QFP-48P10×10×1.95
QFP-48P12×12×2.4
QFP-64P*14×20×3.0
QFP-80P14×20×3.05
0.8/1.0*
1.27SOP-28P17.75×8.6×2.65
SH-DIP-64P58.0×17.0×4.95
1.27
1.778SH-DIP-28P26.0×9.10×4.85
SH-DIP-32P28.0×8.89×4.7
SH-DIP-48P43.69×13.80×5.25
1.778
Dual Operation Flash New product Development product Paper device
Fujitsu microcontrollersFujitsu microcontrollers
16 17
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Product Selection by Application
Expanding the possible applications
Fujitsu Microelectronics microcontrollers
Digital audio-visual DVD players/recordersHome theatersDigital TV, etc.
•••
PrintersScannersNotebook PCsMultifunction printers, etc.
••••
PC peripheral devices
32 bitMB91305 seriesMB91310 seriesMB91312 seriesMB91313 seriesMB91315 seriesMB91319 seriesMB91605 seriesMB91635 seriesMB91645 seriesMB91660 series
••••••••••
32 bitMB91635 seriesMB91645 seriesMB91660 series
16 bitMB90330 seriesMB90335 seriesMB90880 series
•••
•••
DashboardCar audioBody control modules, etc.
•••
Automotive32 bit
MB91F223 seriesMB91460 series
16 bitMB90330 seriesMB90880 seriesMB90920 seriesMB96380 series
••
••••
RobotsInverter controlAutomatic vending machinesMedical equipment
•••
•
Industrial equipment32 bit
MB91260B seriesMB91265A seriesMB91270 seriesMB91470 seriesMB91480 seriesMB91635 seriesMB91645 seriesMB91660 series
16 bitMB90340 series
••••••••
•
Air conditionersRefrigeratorsWashing machinesMicrowave ovens, etc.
••••
Home appliances32 bit
MB91260B seriesMB91265A seriesMB91470 seriesMB91480 series
16 bitMB90460 seriesMB90560 seriesMB90820 series
8 bitMB95100AM seriesMB95120 seriesMB95120MB series
••••
•••
•••
8 bitMB95100AM seriesMB95110AM seriesMB95120MB seriesMB95130MB series
••••
■ General-purpose inverter control: system block diagram
■ Dashboard: System block diagram
■ Washing machine (with dryer): System block diagram
■ Digital multifunction printer: System block diagram
■ Television/video: System block diagram
DMAC A/D D/A Timer PWM output Serial I/O UART USB host USB function
Television Video
LAN controller Video processing engine
TV peripheral devices
(modems, etc.)
Flash memory SDRAM
Motor and panel, etc. Switch
Switch
Remote control
MB91605 MB91F313
External bus(High-speed interface: 80MHz)
Multifunction serial 12 channel UART/SIO/I2C
HDMI-CEC/Remote control reception
External interrupts 24 channels
Multifunction serial 12 channel UART/SIO/I2C
External interrupts 24 channels
HDMI-CEC/Remote control reception
HDMI-CEC/Signal
MPU
MotorDriver
Image processing, command analysis
Program, FONT, WORKFlash
Graphics controller and compression, expansion, refl ection, rotation, binarization, correction, etc. for the controllerMirror drivers
LD
Exposure ASIC (color conversion, exposure control)
SDRAMPaper feed system motors
Various sensors
Mechanical controller ASIC(Drum control,
motor control, etc.)
MB91645
SwitchMicrocontroller with panel LCD Panel
Buzzer
Main board
Mechanical controller board
Exposure control board
Display board
M
M
M
MB91470 series
Rotation speed
Rotation on/off
Forward rotation/reverse rotation
Control unit
Three-phase inverter control
Emergency stop signal
Position detection
LED display
Buzzer output
System peripheral temperature detection (monitor)
Communication between systems
EEPROM
CAN driver
CAN driver
Buzzer
MB90920MB96380MB91460
CAN
CAN
GPIO
Serial
Sound generator LCD
controller
SMC
GPIO
LCDLCD
Stepping Stepping motormotor
High-speed CAN
Low-speed CAN
MB91480 series for motor control
Washing machine control functions
Washing machine control functions
Human interface unitMB95100AM
series
Water supply valve control
Water level sensor
Emergency stop signal
Three-phase inverter control
Lid open/closed detectionKey input
Serial communication
LED displayBuzzer output
Emergency stop signal
Three-phase inverter control
Power device
Warm air fan control motor (forward rotation)
Washing tub control motor (forward rotation/reverse rotation)
Powe
r dev
ice
M M
Position detection6
Temperature sensor
Air fl ow sensor
Drier machine
Position detection
M
Pow
er d
evic
e6
DMAC A/D D/A Timer Intelligent PWM output Serial I/O UART USB host USB function composite timer
DMAC A/D D/A Timer PWM output Serial I/O UART CAN LIN LCD controller Inverter
DMAC A/D D/A Timer Serial I/O UART CAN LIN FiexRey USB host USB function LCD controller
DMAC A/D Timer Intelligent PWM output Serial I/O UART LCD controller Inverter composite timer
6
Motor
Fujitsu microcontrollersFujitsu microcontrollers
18 19
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Built-in CAN microcontrollers
Built-in CAN microcontroller features
CAN is an abbreviation of Controller Area Network, and is a standardized network protocol proposed by Robert Bosch GmbH. Although CAN was originally developed as a LAN for automotive systems, it has become a prominent network protocol in a wide range of fi elds that desire it's reliability and refi ned collision detection functionality.
(1) High-speed access (up to 1Mbps)(2) Error detection(3) Short message structure(4) Multi-master scheme(5) Bus access priority order
Overview■
Features■
HVAC: System block diagram■
The MB96300 series of high-performance 16-bit CAN microcontrollers offer power consumption of approximately 1/4 that of earlier Fujitsu products. Furthermore, the maximum operating frequency has been increased from 33 MHz to 56 MHz, and the processing performance has been increased approximately 5 times over earlier Fujitsu products by implementing a pipelining function.
Built-in high-performance 16-bit CPU core
Object code and pin layout compatible with the F2MC-16LX family
Built-in CAN controller supporting 32 message buffers (C-CAN support)
CPU performance approx. 2.5 times that of the 16LX at the same frequency
CPU core: CISC, 5-stage pipeline Compatibility with the F2MC-16LX: Object codeInternal operating frequency: 56 MHz (max)Package: 64 pins to 144 pinsFlash capacity: 288 kBytes to 544 kBytesRAM capacity: 12 kBytes to 24 kBytesOperating voltage: VCC=3.0V to 5.5V
●
●
●
●
MB96300 series Spec details: P46
MB91460 series Spec details: P42, 43
Features■
FR60 MCU product roadmap■
MB91460 series• Increased CPU speed (operates at 80 MHz)• Built-in high capacity Flash memory• Wide range of pin counts and CAN channels
Vehicle-oriented communication interface built-in as standard
CANCAN protocol ver. 2.0 A/B compliantNumber of channels: 2 to 6 channels (Varies depending on product.)Number of message buffers: 32 to 128 (Varies depending on product.)
LIN-UARTLIN communication supportSPI communication supportClock synchronous/asynchronous communication supportMaximum 4 Mbps
Built-in multi-unit high-speed A/D converterMinimum conversion time per channel: 3.0µsNumber of channels: 8 to 32 channels (Varies depending on product.)
Development environment and software resources can be reused between seriesDevelopment environment, including evaluation chip and ICE, is the sameSoftware resources can be reused because the peripheral functions and register maps have common specifi cations
●
■
■
●
●
MB96300 series
Engine water temperature sensorExternal air temperature sensorEvaporator temperature sensorExhaust gas detection sensorCabin temperature sensor2D sensorHumidity sensorMotor position (angle) detectionVent temperature sensorPanel dials
••••••••••
Air mix doorInternal/external air switchVent selection Blower motor Compressor
•••
CAN bus
LIN bus
LCD control panel
Fan direction selection switchTemperature control lever switchInternal/external air selection switch
I/O ports I/O ports
PPG timer
A/D
UARTF2MC16FX CPU core
CAN
LIN
MB91F469G2MB/96KB
MB91F467D1MB/64KB
MB91F467R1MB/64KB
MB91V460ASuper Eva
MB91F467M1MB/64KB
MB91F467C1MB/64KBMB91F465C
512KB/32KB
MB91F467B1MB/40KBMB91F466B
768KB/40KBMB91F465B512KB/40KB
MB91F465K512KB/16KB
MB91F464B384KB/40KB
MB91F463N256KB/10KB
MB91F464A384KB/16KB
MB91F463Y256KB/32KB
MB91F464Y384KB/32KB
MB91F465Y512KB/32KB
MB91F465X512KB/32KB
LQFP-216 MediaLBCAN:2ch, I2S:10ch
CAN:6ch, UART:8ch
CAN:3ch, UART:5ch
CAN:3ch, UART:7ch
CAN:6ch, UART:7ch
CAN:3ch, UART:5ch
CAN:6ch, UART:16ch
CAN:3ch, UART:7ch
CAN:2ch, UART:3ch
CAN:2ch, UART:3chLQFP-100CAN:1ch, UART:5ch
64pinCAN:2ch, UART:4ch
LQFP-100CAN:2ch, UART:3ch
LQFP-100 FlexRayCAN:2ch, UART:3ch
LQFP-120CAN:1ch, UART:5ch
LQFP-144CAN:6ch, UART:7ch
LQFP-144CAN:3ch, UART:5ch
LQFP-176CAN: 2 channel, UART: 7 channel,dual power supply products (Also support 3V single power supply)
320pin320pin
208pin208pin
144pin144pin
MediaLB supportMediaLB support
100pin100pin
120pin120pin
RAM 64KBRAM 64KB
Nu
mb
er o
f p
ins
Fujitsu microcontrollersFujitsu microcontrollers
20 21
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Built-in CAN microcontrollers Built-in FlexRay microcontrollers
What is FlexRay
Spec details: P42, 43
Series lineup
Spec details: P46 to 53
FlexRay is a next-generation vehicle-mounted network protocol.FlexRay supports high reliability, high-performance control (maximum communication speeds of up to 10Mbps), and has drawn attention in a wide range of fi elds as a next-generation, high-performance automotive network protocol aimed at X-by-Wire replacement of mechanical control systems with electronic control systems.The standardization of FlexRay as a next-generation vehicle-mounted communication protocol is being promoted by the FlexRay Consortium.
FlexRay features■Vehicle-mounted LAN communication for X-by-Wire (limited to CAN)
Time Trigger ProtocolMax 10Mbps
Communication protocol considering high reliability Demanded by X-by-Wire applications
Supports completely duplicated networks (redundant communication)Scheduling monitoring (bus guardian)
Supports fl exible topologiesSupports Bus, Star, and Hybrid topologiesStatic Segment and Dynamic Segment segment structure
●
●
●
Features■Built-in FlexRay controller macro from Robert Bosch GmbH supporting FlexRay Protocol Ver 2.1
Supporting FlexRay communication speeds of 10Mbps, 5Mbps, and 2.5Mbps
Built-in PLL oscillator circuit exclusively used for FlexRay system clock
●
●
●
FlexRay MCU roadmap■ MB91F465X block diagram■
Built-in FlexRay microcontrollers
Number of pins [pin] 64 100 120 144 176 208 320
ROM[Byte]
2112K MB91460MB91460
1088KMB91460MB91460
544KMB91220MB91220
416K
MB91270MB91270MB91210MB91210
384K
MB91460MB91460
256K MB91245MB91245
ROM-less product
MB91460MB91460 64K MB91265MB91265
Number of pins [pin] 48 64 80 100 120
ROM[Byte]
544K
416K MB90340EMB90340EMB96300MB96300
384KMB90590GMB90590G
MB90390MB90390
288KMB90945GMB90945G
MB90545GMB90545GMB90920MB90920
128KMB90350EMB90350EMB90495GMB90495G MB90425GMB90425G
MB90595GMB90595GMB90420GMB90420GMB90440GMB90440GMB90540GMB90540G
64KMB90360EMB90360EMB90385MB90385MB90895MB90895
FR60CPU Core
8-channel 16-bit free-running timer
8-channel 16-bit reload timer
Clock modulator
Clock supervisor
FlexRay
CAN 2ch
LIN UART 3ch
I2C bus 1ch
Flash 544KSRAM 32K
17-channel 10-bit AD converter
11-channel external interrupts
I/O ports
12-channel PPG timer
6-channel output compare
8-channel input capture
Real-time clock
Hardware watchdog timer
5-channel DMAC
Package: LQFP-100
MCU with FlexRay
MB91F465X
100pinWithout FlexRay
FR60 MB91460 SeriesFR60 MB91460 Series
MB91F465Y
MB91F_FlexRay
Steer
Brake
Suspension
Gateway
MB88121C
MB88121B
64pinFlexRay 2.1Serial & parallel host I/F
100pin to 144pinFPU & Motor
64pin
FR80FR80
High Performance/Dual CoreHigh Performance/Dual Core
ASSP (Standalone CC)
Fujitsu microcontrollersFujitsu microcontrollers
22 23
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Built-in USB microcontrollers
Built-in USB microcontroller features
MB91660 series Spec details: P41
USB is an abbreviation of Universal Serial Bus.Support for USB interfaces is continuing to grow in the variety of devices that connect to recent computers.Fujitsu Microelectronics is expanding our lineup of microcontrollers with built-in USB Function (compliant with USB2.0 Full-Speed: 12Mbps).Products are also available with built-in simple Host (Mini-Host) functionality, making it possible to implement a system that can use a USB interface even without a PC.
Overview■
Features■
Sample label printer application: system block diagram■
The MB91660 series of high-performance 32-bit USB microcontrollers has a built-in FR80 core, improving the CPU processing performance by approximately 1.3 times over previous Fujitsu products.
FR80 high-performance 32-bit RISC CPU coreInherits the instruction set from previous FR productsMaximum CPU operating frequency: 33MHz
USB Full-Speed (12Mbps) compliant USB FunctionFlash memory built into the microcontroller can be programmed via the USB interface
USB Mini-Host Full-Speed (12Mbps)Offers connectivity with USB devices even without a PC
Slave interfaceA USB interface can be added to a system by connecting this microcontroller via the slave interface to a host CPU that does not have USB
Supports driver software (USB Function, USB Mini-Host) from Interface Corporation
●
●
●
●
●
Series lineup
Devices with USB connectivity■
Spec details: P41
Spec details: P46
Spec details: P58
• Printers• Scanners• Notebook PCs• SLR cameras• Stereos
Number of pins [pin] 64 120 144 178
ROM[Byte]
1024KMB91319MB91319
512K MB91F662MB91F662 MB91310MB91310
384K MB91661MB91661
256K MB90330AMB90330A
128K
64K MB90335MB90335
32K MB89051MB89051
16KMB89580B/BWMB89580B/BW
ROM-less product
8K MB91305MB91305
FR80 CPU core
16-channel16-bit base timer
(RLT/PPG/PWM/PWC)
3-channel 8-bit D/A
12-channel multifunction serial
interface (UART/SIO/I2C mode)
3-channel 16-bit reload timer
4-channel U/D counter
Flash 512KBFlash 512KBRAM 4 8KBRAM 4 8KB
24-channel 10-bit A/D
External interrupts 32 channels
I/O ports
USB Mini-HostUSB Function
8-channel OCU2-channel 16-bit free-
running timer8-channel ICU
MB91660 series
Label feed motor
Label cutter motor
Printing unit
LCD controller
Paper jam detectionLabel cartridge empty detection
PC
Key input
Fujitsu microcontrollersFujitsu microcontrollers
24 25
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Built-in LCD/VFD controller microcontrollers
Built-in LCD controller microcontroller featuresLCDs (liquid crystal displays) are widely used as the display device in general home appliances and digital home applications.Fujitsu offers a lineup of microcontrollers with built-in LCD controller for integrated systems that require an LCD display.
(1) Selectable frame frequency(2) Supports 4-common output/40 segment LCD (maximum)(3) Lit/not-lit is set by display RAM data
Overview■
MB95120MB series Spec details: P58
Features■
Sample application in microwave oven: system block diagram■
An 8-bit microcontroller with a built-in LCD controller.This product has a built-in LCD controller and operates at 5V. This also supports human interface control applications such as LCD display units and key input in general home appliances such as refrigerators and microwave ovens.
The display clock source can be selected from the main and sub clocks.The frame rate can also be selected from 4 patterns
40 segment × 4 common outputAble to display a maximum of 160 characters
Blinking control functionOffers hardware controlled blinking, reducing software load
Selectable from: 1/2 bias, 1/2 duty1/3 bias, 1/3 duty1/3 bias, 1/4 duty
●
●
●
●
LCD display capable during microcontroller standbyLCD display capable during system low power operation
LCD display pins / external power supply pins can be used as general-purpose ports when not used
Built-in resistance dividerContributes to reducing the number of parts
●
●
●
Spec details: P41
Spec details: P52, 54
Spec details: P58 to 60
Series lineup
External interrupts 12 channels
LIN-UART 1ch
UART/SIO 1ch
I2C 1ch
10bit A/D 12ch
2-channel 16-bit PPG timer
8/16-bit PPG timer4 channels in 8-bit mode2 channels in 16-bit mode
F2MC-8FXCPU core
LCDC40seg×4com
Low power consumptionclock timer
Dual Operation FlashDual Operation FlashUpper-BANK 48KBLower-BANK 12KBNote: Only in Flash
products
2-channel 8-bit/16-bit composite timer
MB95120MB series
• Door switch• Various key inputs
• Cooking temperature• Oven temperature• Various sensors
• Heater control
M
Information display (LCD)Clock display
Cooking temperature
Cooking modeCooking time
Buzzer
Number of pins [pin] 48 52 64 80 100
ROM[Byte]
60K MB95160MMB95160M(32×4)(32×4)
MB89490MB89490(32×4)(32×4)
MB95120MB95120MB95120MBMB95120MB
(40×4)(40×4)
48KMB89560/A/HMB89560/A/H
(24×4)(24×4)MB89550AMB89550A
(32×4)(32×4)
32K MB95150MMB95150M(16×4)(16×4)
24KMB89920MB89920
(28×4)(28×4)MB89800MB89800
(70×4)(70×4)
16K
MB89940MB89940(17×4)(17×4)
MB89480MB89480(31×4)(31×4)
12K
8K
6K MB89150/AMB89150/A(36×4)(36×4)
MB95160/AMB95160/A(24×4)(24×4)
MB89820MB89820(50×4)(50×4)
4K
Number of pins [pin] 100 120 144
ROM[Byte]
256K MB90800MB90800(48×4)(48×4)
MB90F922NAMB90F922NA(32×4)(32×4)
128KMB90M405MB90M405
<For VFD display><For VFD display>MB90520BMB90520B
(32×4)(32×4)
MB90378MB90378(9×4)(9×4)
96K
64K MB90420GMB90420G(24×4)(24×4)
MB90370MB90370(9×4)(9×4)
Number of pins [pin] 120 144
ROM[Byte]
256K MB91230MB91230(32×4)(32×4)
MB91245MB91245(32×4)(32×4)
Values in parentheses are number of segments × number of common
Values in parentheses are number of segments × number of common
Values in parentheses are number of segments × number of common
Turntable control
Fujitsu microcontrollersFujitsu microcontrollers
26 27
Microcontrollers for inverter control
Features of microcontrollers for inverter control
This product is equipped with a variety of timers as suitable for inverter control and a high-performance A/D converter as suitable for feedback control in order to provide inverter control to meet demands for energy effi ciency in general home appliances such as air conditioners, washing machines and driers, refrigerators, induction cookers, etc.
1) Built-in multifunction timer capable of three-phase PWM control2) The functionality that suits the application can be freely selected from a variety of timers (PPG,
PWM, PWC, input capture) using the built-in base timer3) Built-in multi-unit multi-channel high-performance A/D converter that can operate in
conjunction with the multifunction timer and DMAC4) Built-in dedicated high-speed multiply and accumulate calculation macro that can perform
vector calculation processing in parallel with the CPU FR 80-32bit RISCFR
Example application to air conditioner outdoor unit: system block diagram
512K
384K
256K
128K
96K
64K
32K
16K
Series lineup
MB91265MB91265
Number of pins [pin] 64 80 100 144
Motor control equipment
• Air conditioners• Refrigerators• Washing machines• Industrial motors
Overview
This microcontroller is aimed at 5V interface home electronics and is equipped with a Fujitsu original RISC CPU core.Offers a built-in 32-bit CPU core with a maximum operation processing rate of 80 MHz, a multifunction timer capable of three-phase PWM control, a high-performance A/D converter, and a dedicated 32-bit high-speed multiply and accumulate macro in order to offer inverter control for home appliances such as air conditioners, washing machines and driers, refrigerators, and induction cookers.
Features
CPU core: FR60 RISC, 5-stage pipeline
Internal operating frequency: 80MHz
Package: LQFP-100
(0.5mm pitch, 14mm × 14mm)
Flash capacity: 512 kBytes
RAM capacity: 32 kBytes
Operating voltage: Vcc = 4.0V to 5.5V
Main functions
Analog 8/10-bit A/D function (2 units × 4 channels , 1 unit × 10 channels)
Multifunction timer capable of controlling 2 motors (2 units)
16-bit reload timer (2 channels)
8/16-bit PPG timer function (16 channels × 8-bit, 8 channels × 16-bit)
16/32-bit base timer function (4 channels × 16-bit, 2 channels × 32-bit)
Multiply and accumulate circuit (1 unit) (32-bit × 32-bit + 72-bit = 72-bit)
Spec details: P43
Air conditioner indoor unit
MB91480 series
FR60 CPU core
Multiply and accumulate circuit
External interrupts 11 channels
I/O ports
2-channel 16-bit reload timer
8-channel 8/16-bit PPG timer
4-channel base timer
UART 3ch
Multifunction timer
4-channel 10-bit A/D
Multifunction timer
4-channel 10-bit A/D
10-channel 10-bit A/D
ICU 4ch
16-bit free-running timer
OCU 6ch
Waveform generator
ICU 4ch16-bit free-running timer
OCU 6ch
Waveform generator
IGBT
IGBT
Air fl ow sensor
Temperature sensor
Compressor Compressor control unitcontrol unit
Fan motor control unit
Current detector
Current detector
M
M
MB90460MB90460
MB90560MB90560
MB89850RMB89850R
MB90565MB90565 MB90820MB90820
MB89860MB89860
MB91480MB91480 MB91470MB91470
MB91260BMB91260B
Spec details: P43
Spec details: P54
Spec details: P58
ROM[Byte]
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
Fujitsu microcontrollersFujitsu microcontrollers
MB91480 series
28 29
Development assistance tools (software tools)
Development environment solution: SOFTUNE integrated development environment
Overview
Program development for integrated systems consists of a repeating cycle of coding, building, and debugging.Fujitsu Microelectronics provides the SOFTUNE integrated development environment that these operations to be performed smoothly, and to reliably advance each individual operation.
8 Integrated development environment delivering simple operability and high effi ciency
Resolves complicated confi guration procedures during program development
Works in conjunction with a variety of tools that support seamless development with SOFTUNE
SOFTUNE Professional Pack evaluation version available for download
http://jp.fujitsu.com/microelectronics/support/
Real-time OS: REALOS
SOFTUNE REALOS
Fujitsu Microelectronics provides the "REALOS" real-time OS is compliant with the industry standard
µITRON specifi cations, and the "µT-REALOS/FR" real-time OS optimized for embedded systems that has
been migrated to the FR microcontrollers and is compliant with the µT-Kernel specifi cations. A confi gurator,
multitasking debugger, and analyzer are available as assistance tools for improving the effi ciency of
developing application programs that use the REALOS kernel.
Fujitsu MCU products with real-time OS support
Features
Employs projectsThe development environment can be easily structured both for a single person
performing multiple tasks in parallel or for a single developer within a group by
using project fi les.
Offers superior usability1. Editor provided as standard
The standard built-in editor offers a wide variety of functionality, including syntax
highlighting and auto-indenting.
2. Jump to errors and online help
Errors that occur during a build are displayed in an output window at the bottom
of the screen. It is simple to jump to the tag or display the error details from the
errors displayed here.
3. Capable of operating with commercial editors
Capable of integrating commercial editors to meet the wishes of users wanting
to use an editor with more functionality. (Mifes V1.0/V3.0, WZ Editor, Hidemaru,
Power Editor, CodeWright32, TextPAD32, etc.)
Customizable working environmentThe development environment is able to be customized by the developer, such
as by working with source control tools when sharing fi les, or calling fi le format
conversion tools.
Debugging functionsSupports three kinds of debuggers as required to be used in the various stages
of development: emulator debugger, monitor debugger, simulator debugger. The
optimal debugging environment can be selected to suit the conditions.
Make/build
Source window Register window
Project window Editor window
Output window Individual tool displays
SOFTUNE Workbench
Emulator debugger
Monitor debugger
Simulator debugger
Instruction set simulatorTarget boardICE
LAN, USB,or RS-232C
RS-232C Memory
MCU µITRON spec µT-Kernel spec
FR REALOS/FR, REALOS/FR Spec.4 µT-REALOS/FR
F2MC-16LX REALOS/907 -
F2MC-8L REALOS/896 -
SOFTUNE Workbench multitasking debugger features
Systems that use REALOS can be debugged by using the SOFTUNE Workbench multitasking
debugger.
Object state display
Issue system calls
Task trace function
System call breakpoints
Task dispatch breakpoints
SOFTUNE REALOS confi gurator features
Tool for constructing system programs that use REALOS.
Allows kernel confi guration to be performed by confi guring setting following displayed screens.
System confi guration using a tree view format
Defi nition of confi guration data
Integrity checking of confi guration data
OS size calculation
SOFTUNE REALOS analyzer features
Analyzer is an analysis tool for system programs that use REALOS. Graphically displays the
performance and task state transitions of systems that incorporate REALOS. This allows the
operation of the system to be understood visually.
Object display
Trace log (statistical information, transition diagrams)
OS breakpoints
Task context display
Stack information display
Issue system calls
Co
nfi g
ur
ator
Analyzer
REALOS kernal
Multitasking debugger
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
30 31
Development assistance tools (hardware tools)
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
MB2198 emulator features
• Supported DSU: DSU3, DSU4
• Linearly supports power supply voltages of +2.7V to +5.5V(The upper and lower limits on the microcontroller operating voltage and operating frequency varies depending on the MCU. Check the MCU operating voltage and operatin g frequency on the related documentation for each device (data sheets, hardware manuals)).
• Offers source-level debugging (assembler, C language, mixed display)
• Simple GUI operation using pull-down menus and buttons
• Real-time trace function
• Multi-window display of source code, variables, registers, memory, trace, etc.
• Hardware breakpoints × 5, software breakpoints × 8192, code events × 2, data events × 2
• Execution cycle measurement function
• Host interface: Equipped with RS-232C (max. 115kbps), LAN (10BASE-T, 100BASE-TX), USB 1.1 compliant
External view of system MB2198 emulator features
• Supported DSU: DSU4
• Linearly supports power supply voltages of +2.7V to +5.5V (The upper and lower limits on the microcontroller operating voltage and operating frequency varies depending on the MCU. Check the MCU operating voltage and operating frequency on the related documentation for each device (data sheets, hardware manuals)).
• Offers source-level debugging (assembler, C language, mixed display)
• Simple GUI operation using pull-down menus and buttons
• Real-time trace function
• Multi-window display of source code, variables, registers, memory, trace, etc.
• Hardware breakpoints × 5, software breakpoints × 8192, code events × 2, data events × 2
• Execution cycle measurement function
• Host interface: Equipped with RS-232C (max. 115kbps), LAN (10BASE-T, 100BASE-TX), USB 1.1 compliant
System structure System structure
Emulator main unit Main unitMB2198-01
Power supply cable
Confi guration 1
Commercial LAN cable (10BASE-T/100BASE-TX)
Commercial USB cable (USB 1.1)
Commercial RS-232C cable (9-pin to 9-pin crossover)Personal computer SOFTUNE Workbench
Emulatordebuggersoftware
MB219x-xxxRAM board *
DSU cable Adapter board / header board
Socket
Evaluation chip
User target system
User target system
SocketHeaderCableAdapter board
Evaluation chip
Evaluation chip
MB2198-10 MB219x-xxx
MB2198-xxx MB219x-xxx
MB2198-10 MB219x-xxx MB219x-xxx
MB2198-10
DSU cableCable
Adapter boardSocketHeader
User target system
DSU cable
User target system
MCU
*: Optional component
Main unitMB2198-01
Power supply cable
Main unit
Commercial LAN cable (10BASE-T/100BASE-TX)
Commercial USB cable (USB 1.1)
Commercial RS-232C cable (9-pin to 9-pin crossover)Personal computer SOFTUNE
Professional Pack
Workbench emulator
debugger software
User target system
SocketHeaderCableAdapter board
Evaluation chip
Confi guration 1
MB2198-500 MB2198-5xx
Personal computer
USB, LAN orRS-232C (crossover)
Emulator main unitMB2198-01
Adapter boardMB2198-500
Header boardMB2198-5xx
User target system
Socket
Evaluation MCU
External view of system
Example system confi guration for the MB96300 series
Fujitsu microcontrollersFujitsu microcontrollers
Confi guration 2
Confi guration 3
Confi guration 4
32 33
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
MB2147-01 (high-speed support version) features
• Supports maximum microcontroller operating frequency of 33MHz• Linearly supports power supply voltages of +2.7V to +5.5V
(The upper and lower limits on the microcontroller operating voltage and operating frequency varies depending on the MCU. Check the MCU operating voltage and operating frequency on the related documentation for each device (data sheets, hardware manuals)).
• Emulation memory (1M × 4 areas)• Offers source-level debugging (assembler, C language, mixed display)• Simple GUI operation using pull-down menus and buttons• On-the-fl y function (execute commands during microcontroller execution)• Powerful real-time trace function• Multi-window display of source code, variables, registers, memory, trace, etc. • Event triggers that can specify a wide range of conditions (code × 8, data × 8)• Sequential control by a sequencer (4 conditions/3 levels)• Performance measurement function (function to measure the execution time
between two points, and measure the number of repetitions)• Co coverage measurement function (measures the program execution co verage ratio)• Host interface: Equipped with RS-232C (max. 115kbps), LAN (10BASE-T, 100BASE-TX),
USB 1.1 compliant
External view of system
System structure
MB2146-09A (BGM adapter) features
• Linearly supports power supply voltages of +2.7V to +5.5V
(The upper and lower limits on the microcontroller operating voltage and operating
frequency varies depending on the MCU. Check the MCU operating voltage and operating
frequency on the related documentation for each device (data sheets, hardware manuals)).
• Compact development environment. Small, light BGM adapter
• The monitor program executes in dedicated memory and does not consume any
user memory space.
• Supports continuous execution, step execution, instruction breakpoints, data
breakpoints, and sequential breakpoints
• Time measurement
• RAM monitoring
• Capable of instruction trace (maximum of 16 branches)
• Host interface: Can be connected by USB
External view of system
System structure
Main unitMB2147-01
Power supply cable
Main unit
Commercial LAN cable (10BASE-T/100BASE-TX)
Commercial USB cable (USB 1.1)
Commercial RS-232C cable (9-pin to 9-pin crossover)Personal computer SOFTUNE Workbench
Emulator debuggersoftware
Evaluation chip(PGA299 type)
MB2147-20
Adapter board (for PGA299)
MB2132-4xx
Probe cable
Connection to user system
Adapter boardConnection to user system
Flat cable(Included with main
unit)
SocketHeader board
MB2147-5xx
Probe header
Evaluation chip (PGA256 type)
MB2132-4xx
Probe cable
MB2147-10
Adapter board (for PGA256)
Adapter board
Connection to user system
Confi guration 1
Confi guration 2
Adapter exclusively for background monitor debugger
MB2146-09A
USB cable(included)
Personal computer SOFTUNE V3 Workbench
Emulatordebuggersoftware
Evaluation chip*
Mounted
Header boardMB2146-2xx-E
MCU board
MB2146-30xA-E
MB95FV100D-101
MB95FV100D-103
*: Already mounted on MCU board
Socket(NQP ACK)
User system board Evaluation boardMB2146-401-E
Development assistance tools (hardware tools)
Fujitsu microcontrollersFujitsu microcontrollers
34 35
Development assistance tools (evaluation board)
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Evaluation board
FR family evaluation board (MB91906EB)
The evaluation board for the FR family is equipped with SRAM, DRAM, and Flash, and can be used as a substitute target board until the actual target board is fi nished.
Features
• Can be used as the target board for running the emulatorConsists of a main board and a daughter board, with the main board usable for all FR series
• Because it is equip ped with SDRAM, DRAM, and Flash memory, CPU performance can be measured, and can be combined with hardware circuits using the expansion board connector on the main board
• Can be connected to a ROM overlay unit (MB2197-90)• Example confi guration when used in combination with the MB2197-01 (emulator)
MB2197-01 + MB2197-10 + MB91906EB (main board) + MB91901EB (daughter board)
Evaluation board for the FR family/F2MC-16LX/FX (BBF2004)
FeaturesThis evaluation board is manufactured by Sunhayato and supports the F2MC-16LX/FX and FR family.Capable of performing evaluation of simple operations prior to integration into the customer system, contributing to increased development effi ciency. This board consists of a main board and a daughter board. Can be used as a debugger in a tool with integrated emulator debugger (ICE) and for evaluation and serial writing to microcontrollers with built-in Flash memory by changing the daughter board. The main board is common to all types of products, and is able to support different products by changing the daughter board.
Microcontroller starter kit (jouet bleu)
Jouet bleu is a microcontroller starter kit for people beginning to study microcontrollers and embedded systems.This is offered as an education tool for embedded software development for students and new employees.
Features
• Microcontroller board with built-in high-performance 16-bit microcontroller
• Software development environment
• Offers studying from microcontroller basics to applications
• Notebook PCs can be used for software development
Manufactured by SunhayatoSales: Phone: 03-3984-7791 Fax: 03-3971-0535
Manufactured by SunhayatoSales: Phone: 03-3984-7791 Fax: 03-3971-0535
Evaluation board for the F2MC-8FX (MB2146-401)
Features
This evaluation board supports the Fujitsu F2MC-8FX family.Capable of performing evaluation of simple operations prior to integration into the customer system, contributing to increased development effi ciency. Can be used to perform debugging in a tool with integrated emulator debugger (ICE)This board can be used as a common evaluation board supporting all F2MC-8FX family products.
Evaluation board for F2MC-8L/F2MC-16LX microcontrollers with built-in USB (MB2031-01)
Features
This evaluation board supports the Fujitsu USB microcontroller series. Capable of performing evaluation of simple operations prior to integration into the customer system, contributing to increased development effi ciency. This board consists of a main board and a daughter board. The main board is common to all types of products, and can be used to perform debugging in a tool with integrated emulator debugger (ICE) for each product by changing the daughter board.
FR80 evaluation board (under development)
This board is equipped with an FR80 (MB91F639) and built-in network, fi le, and image display functions collected together into a compact size (90mm × 75mm). This can also be used as an evaluation platform, or as an execution board in the customer system at the integration stage. The embedded OS is the Fujitsu µT-REALOS/FR product which is µT-Kernel specifi cation compliant and has strong support for conserving resources and low power functions.
Features
• During the initial development stage, T-Engine standard peripheral resources can
be used by docking with a base board (available separately).
• During the target system development stage, execution and evaluation can be
performed as a core board unit by separating from the base board.
Fujitsu microcontrollersFujitsu microcontrollers
36 37
■Development environment
Type Product name Overview Application conditions Inquiry
Integrated
development
environment
SOFTUNE • Fujitsu genuine integrated development environment
F2MC-8L/8FX family SOFTUNE
F2MC-16 family SOFTUNE
FR family SOFTUNE
Fujitsu Electronics Inc.
http://www.fujitsu.com/global/services/microelectronics/
MULTI5.0• Integrated development environment from Green Hills Software
(GHS)
SOFTUNE REALOS/FR for MULTI
SOFTUNE REALOS/FR Spec.4 for MULTI
Advanced Data Controls Corp.
TEL:+81-3-3576-5351
http://www.adac.co.jp/
■OS
Type Product name Overview Application conditions Inquiry
Real-time
OS
SOFTUNE
REALOS
• Fujitsu genuine µITRON specifi cation compliant real-time OS
• Provides a confi gurator, debugger, and analyzer as assistance tools
SOFTUNE REALOS/FR
SOFTUNE REALOS/FR Spec.4
SOFTUNE REALOS/907
SOFTUNE REALOS/896
Fujitsu Electronics Inc.
http://www.fujitsu.com/global/services/microelectronics/
SOFTUNE
µT-REALOS
• Fujitsu genuine µT-Kernel specifi cation compliant real-time OS
• Supports memory saving, and low power functionsSOFTUNE µT-REALOS/FR
EB tresos • Vehicle-mounted real-time OSF2MC-16 family SOFTUNE
FR family SOFTUNE
Electrobit Nippon KK
TEL:+81-3-5775-6160
http://www.elektrobit.com/
osCAN • OSEK/VDX specifi cation compliant real-time OSF2MC-16 family SOFTUNE
FR family SOFTUNE
Vector Japan Co., Ltd.
TEL:+81-3-5769-7800
http://www.vector-worldwide.com/
■Middleware
Type Product name Overview Application conditions Inquiry
Data compression
softwareRELC • Data compression software
SOFTUNE REALOS/FR
SOFTUNE REALOS/FR Spec.4
Fujitsu Electronics Inc.
TEL:+81-3-5908-8687
http://jp.fujitsu.com/fei/en/services/
Network KASAGO• TCP/IP protocol stack for embedded systems (IPV4/IPV6 dual stack
support). Emphasis on compactness and fast responsiveness.FR family SOFTUNE
Elmic Wescom, Inc.
TEL:+81-45-664-5171
http://www.elwsc.co.jp/
DriverCANdriver/
LINdriver• Vehicle-mounted network communication driver
F2MC-16 family SOFTUNE
FR family SOFTUNE
Vector Japan Co., Ltd.
TEL:+81-3-5769-7800
http://www.vector-worldwide.com/
■Case tools
Type Product name Overview Inquiry
Quality
measurement
PGRelief
• Implements checks from a variety of perspectives, including IPA/SEC coding standards, in addition to
the ISO-C, MISRA-C standards
• Identifi es problem areas and suggests resolution methods
• The level of compliance to be checked and problem areas to be corrected seamlessly by operating in conjunction
with SOFTUNE make/build
Fujitsu Software Technologies Ltd.
TEL:+81-45-475-9820
http://jp.fujitsu.com/group/fst/services/pgr/
QAC/MCM
• Implements compliance checks against ISO-C, MISRA-C standards
• Identifi es problem areas and suggests resolution methods
• The level of compliance to be checked and problem areas to be corrected seamlessly by operating in
conjunction with SOFTUNE make/build
Toyo Corporation
TEL:+81-3-3279-0771
http://www.toyo.co.jp/ss/
Design
development
MATLAB/
Simulink
• Development environment providing the functions required for creating numerical calculation programs
that offers GUI-based design and verifi cation
• Automatically generates includable C source code from the MATLAB model
• To carry out simulations by operating together with the MATLAB model and SOFTUNE debugger
Cybernet Systems Co., Ltd.
TEL:+81-3-5297-3546
http://www.cybernet.co.jp/MATLAB/
ZIPC
• Case tool using an expansion hierarchy state transition chart design method
• Automatically generates C source from state transition charts
• Supports REALOS system calls
• ISS from state transition charts and actual target debugging support by operating in conjunction with SOFTUNE
CATS Co. Ltd.
TEL:+81-45-473-2816
http://www.zipc.com/
XModelink • Code generation
visual STATE • UML compliant state transition design tool/code generation
IAR Systems
TEL:+81-3-5298-4800
http://www.iar.com
Rational Rose
Modeler• UML modelling
IBM Corporation
TEL:+1-800-426-4968
http://www.ibm.com/software/rational/
Rhapsody • UML modelling ITOCHU Techno-Solutions Corporation
TEL:+81-3-6417-5453
http://www.ctc-g.co.jp/Statemate • Model development, automatic code generation, model verifi cation
TargetLink • Code generation from MATLAB model
dSPACE GmbH
TEL:+49-5251-1638-0
http://www.dspace.de
Telelogic
SDL Suite• SDL design, code generation
Telelogic, An IBM Company
TEL:+1-877-275-4777
http://www.telelogic.com
■Validation tools
Type Product name Overview Inquiry
Network
validation
CANalyzer,
CANoe• Network design and validation tool Vector Japan Co., Ltd.
TEL:+81-3-5769-7800
http://www.vector-worldwide.com/CANape • MCU measurement calibration tool
Development assistance tools (development environment /OS/middleware/tools)
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
38 39
Development assistance tool (writing programs)
32/1
6/8-
bit c
ore
lineu
p
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
ROM
, RAM
, Pin
sAp
plic
atio
nsFu
nctio
nalit
yDe
velo
pmen
tas
sist
ance
tool
sPr
oduc
t sel
ectio
n
Flash write supportFujitsu Microelectronics offers a support system for writing programs that meets the needs of the customer from development to mass production and shipping.The most effi cient mass production for the customer can be selected depending on deliver schedules and production numbers.
Advantages: Large lots
If written products are procured from a Fujitsu Electronics dealer
If written by the customer
If written by the customer
Advantages: Short deliver schedules
Advantages: Short deliver schedules, maintenance
Want pre-written products
Want writing prior to mounting
Want on-board writing
Fujitsu Microelectronics plantFujitsu ElectronicsProgramming house
Pre-written products
Customer
Customer
Customer
Not-written products
Not-written products
Parallel writer
On-board programmer
Want pre-written devices■
Want writing prior to mounting■
Want on-board writing■
Customers who desire pre-written products can be accomodated by factory writing or programming house.
Written externally: Programming houseCan also handle small volumesAble to provide suitable pre-written products under short delivery schedules
Pre-written products: Written at the factorySame handling format as MASK ROM productsSupports same delivery schedules as MASK ROM products
●
●
Several parallel writers are available to suit customer applications and budgets.
Parallel writers for microcontrollers with built-in Flash memory●
Several on-board writers are available to suit customer applications and budgets.
Serial on-board writers●
Parallel writer F2MC-8L F2MC-8FX F2MC-16LX FR family
Flash Support Group, Inc. (Single unit write programmer)
AF9708/09/09B/09C Yes Yes Yes Yes
AF9710 Yes
(Batch programmer) AF9723/23B Yes Yes Yes Yes
AF9845/45B Yes Yes Yes Yes
Minato Electronics Inc. (Single unit write programmer)
MODEL1881XP Yes Yes
MODEL1995/2 Yes Yes
(Batch programmer) MODEL1893 Yes Yes
MODEL1931 Yes Yes
MODEL1930+SU3000LX Yes Yes
MODEL1940 Yes Yes
MODEL1895 Yes Yes
MODEL1896 Yes Yes
Data I/O Corporation (Single unit write programmer)
OPTIMA Yes Yes
DUAL-Package Yes Yes
(Batch programmer) OCTAL Yes Yes
Flash memory/microcontroller support programmer (FlashPAK) Yes Yes
Data I/O Corporation (representative in Japan: Toyo Corporation)
Serial on-board writers F2MC-8L F2MC-8FX F2MC-16LX F2MC-16FX FR family
Fujitsu Microelectronics Limited Flash USB Programmer(BGM adapter MB2146-09A-E needs to be purchased separately)
Yes Yes Yes Yes
Flash MCU Programmer Yes Yes Yes Yes Yes
Yokogawa Digital Computer Corporation AF420/AF320/
AF620/AF520
AF220/AF210/
AF120/AF110
Yes Yes Yes Yes
Interface Corporation ITF200Yes Yes
Tsuzuki Densan Co., Ltd. TF-WRITERYes Yes
Flash Support Group, Inc. AF9101Yes Yes Yes
Kyoei I.S.P-300Yes
Fujitsu microcontrollersFujitsu microcontrollers
40 41
Application G e n e r a l - p u r p o s e
Series name MB91101 M B 9 1 1 0 7 M B 9 1 1 2 9 M B 9 1 1 3 0 M B 9 1 1 5 0
Product name MB91101A MB91107A MB91108 MB91F127 MB91F128 MB91133 MB91F133A MB91151A MB91154 MB91155 MB91F155A MB91F158
Package [pins] 100 120 100 144 144 120
Operating power supply voltage: VCC [V] 3 or 5 3 3 3 or 5 3
Maximum internal clock operating frequency [MHz] 50 50 25 33 36 33 32
Sub clock - - - Yes - Yes -
Memory type No ROM/External ROM No ROM/External ROM Flash MASK Flash No ROM/External ROM MASK Flash
ROM[Bytes] - - 256K 510K 254K - 384K 510K
RAM[Bytes] 2K 128K 160K 14K 8K 34K 22K 34K 8K
Cache [KBytes] 1 1 - - 1 -
DMAC [channels] 8 8 8 8 8 -
External interrupts [channels] 5 9 6 24 16
External bus Yes Yes Yes Yes Yes
A/D converter [bits × channels] 10bit×4 10bit×4 10bit×8 10bit×8 10bit×8
D/A converter [bits × channels] - - - 8bit×3 8bit×3
Timer
[channels]
16-bit 3 3 3 5 4 2
Output compare - - 16bit×4 16bit×8 16bit×8 16bit×4
Input capture - - 16bit×4 16bit×4 16bit×4
PPG timer - - 16bit×4 16bit×6 16bit×6 16bit×4
PWM timer 16bit×4 16bit×4 - - -
PWC timer - - - - -
Up/Down counter - - - 8bit×2 8bit×2
Serial [channels] 3 3 3 5 4 5 2
I2C - - - - - 1 -
UART/SIO 3 / - 3 / - 3 / - 5 / - 4 / - 2 / -
Communication
[channels]
CAN - - - - -
USB-Host - - - - -
USB-Function - - - - -
IE bus - - - - -
LCD controller [seg × com] - - - - -
Inverter - - - - -
VFD - - - - -
Remarks DRAM I/F DRAM I/F - - -
Evaluation chip MB91V101A MB91V108 MB91FV129 MB91FV130 MB91V151A
Application G e n e r a l - p u r p o s e
Series name M B 9 1 3 5 0 A M B 9 1 6 3 5 M B 9 1 6 4 5
Product name MB91351A*1 MB91352A MB91353A MB91F353A MB91354A MB91355A MB91F355A MB91F356B MB91F639 MB91F647
Package [pins] 120 176 176 176 176 144 176
Operating power supply voltage: VCC [V] 3 3 3
Maximum internal clock operating frequency [MHz] 50 60 60
Sub clock Yes Yes Yes
Memory type MASK Flash MASK Flash Flash Flash
ROM[Bytes] 384K 512K 384K 512K 512K 256K 1M 512K
RAM[Bytes] 24K 16K 24K 16K 24K 64K 48K
Cache [KBytes] - - -
DMAC [channels] 5 8 8
External interrupts [channels] 9 17 32 32
External bus Yes Yes Yes
A/D converter [bits × channels] 10bit×8 10bit×12 10bit×31 10bit×32
D/A converter [bits × channels] 8bit×2 8bit×3 8bit×3 8bit×3
Timer
[channels]
16-bit 4 Yes Yes
Output compare 16bit×2 16bit×8 16bit×8 16bit×8
Input capture 16bit×4 16bit×8 16bit×8
PPG timer 16bit×3 16bit×6 Yes Yes
PWM timer - Yes Yes
PWC timer - Yes Yes
Up/Down counter 8bit×1 8bit×2 4bit×4 4bit×4
Serial [channels] 7 9 12ch (Multi Function Serial Interface: UART/SIO/I2C)
I2C 1 - -
UART/SIO 4 / 2 5 / 3 - -
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] - - -
Inverter - - -
VFD - - -
Remarks - Selectable Reload Timer/PPG/PWM/PWC modes, also has 32-bit modes
Evaluation chip MB91V350A MB91V650 MB91V650
Application B u i l t - i n U S B F o r v i d e o
Series name MB91305 MB91310 M B 9 1 3 1 9 MB91660 MB91313 MB91605
Product name MB91305 MB91F312A MB91316A MB91F318R MB91F662 MB91F313 MB91605
Package [pins] 176 144 176 120 120 176
Operating power supply voltage: VCC [V] 3 3 3 3 3 3
Maximum internal clock operating frequency [MHz] 64 40 40 33 33 80
Sub clock - Yes Yes Yes Yes -
Memory type No ROM/External ROM Flash MASK Flash Flash Flash No ROM
ROM[Bytes] - 512K 512K 1024K 512K 544K -
RAM[Bytes] 64K 16K 32K 48K 48K 32K 128K
Cache [KBytes] 4 - - - - 16K
DMAC [channels] 5 5 5 8 5 4
External interrupts [channels] 16 5 5 32 24 24
External bus Yes - - Yes Yes Yes
A/D converter [bits × channels] 10bit×10 10bit×10 10bit×10 10bit×24 10bit×10 10bit×12
D/A converter [bits × channels] - - - 8bit×3 - -
Timer
[channels]
16-bit 3 3 3 4 Yes Yes Yes
Output compare - 16bit×4 16bit×4 16bit×8 - -
Input capture 16bit×4 16bit×4 16bit×4 16bit×8 - -
PPG timer 16bit×4 16bit×4 16bit×4 Yes Yes Yes
PWM timer - - - Yes Yes Yes
PWC timer 16bit×1 16bit×1 16bit×1 Yes Yes Yes
Up/Down counter - - - 4bit×4 - -
Serial [channels] 9 9 9 12ch (Multi Function Serial Interface: UART/SIO/I2C) 11ch (Multi Function Serial Interface: UART/SIO/I2C) 12ch (Multi Function Serial Interface: UART/SIO/I2C)
I2C 4 4 4 - - -
UART/SIO 5 / - 5 / - 5 / - - - -
Communication
[channels]
CAN - - - - - -
USB-Host - 1 - 1 - -
USB-Function 1 1 1 1 - -
IE bus - - - - - -
LCD controller [seg × com] - - - - - -
Inverter - - - - - -
VFD - - - - - -
Remarks SDRAM I/F OSDC OSDC, CCD Selectable Reload Timer/PPG/PWM/PWC modes, also has 32-bit modes HDMI HDMI
Evaluation chip MB91305 MB91FV310A MB91FV319R MB91V650 MB91F313 MB91605
Application G e n e r a l - p u r p o s e
Series name M B 9 1 3 0 1 M B 9 1 3 0 7 M B 9 1 3 4 5
Product name MB91302A MB91302A-010 MB91302A-020 MB91306R MB91307B MB91307R MB91F345B MB91F346B*1
Package [pins] 144 120 100
Operating power supply voltage: VCC [V] 3 3 3
Maximum internal clock operating frequency [MHz] 68 66 50
Sub clock - - -
Memory type MASK No ROM/External ROM No ROM/External ROM Flash
ROM[Bytes] Yes - - 512K 1024K
RAM[Bytes] 4K 64K 128K 32K
Cache [KBytes] 4 1 -
DMAC [channels] 5 5 5
External interrupts [channels] 9 9 24
External bus Yes Yes Yes
A/D converter [bits × channels] 10bit×4 10bit×4 10bit×16
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 3 3 3
Output compare - - 16bit×4
Input capture 16bit×4 - 16bit×4
PPG timer 16bit×4 - 16bit×8
PWM timer - - -
PWC timer - - 16bit×1
Up/Down counter - - 16bit×2
Serial [ch annels] 5 4 11ch (Multi Function Serial Interface: UART/SIO/I2C)
I2C 2 1 -
UART/SIO 3 / - 3 / - -
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] - - -
Inverter - - -
VFD - - -
Remarks Built-in SDRAM interface Built-in RTOS Built-in Program Loader - -
Evaluation chip MB91V301A MB91V307R MB91F345 MB91F346
*1: Under development *2: In planning
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
42 43
Application B u i l t - i n C A N
Series name M B 9 1 2 1 0 M B 9 1 2 2 0 M B 9 1 2 4 5 MB91265
Product name MB91F211 MB91213 MB91F213 MB91F223 MB91F223S MB91248 MB91F248 MB91248S MB91F248S MB91F267N
Package [pins] 100 144 144 144 64
Operating power supply voltage: VCC [V] 5 5 5 5
Maximum internal clock operating frequency [MHz] 40 32 32 33
Sub clock Yes Yes - Yes - -
Memory type Flash MASK Flash Flash MASK Flash MASK Flash Dual Op. Flash
ROM[Bytes] 288K 544K 512K 256K 128K
RAM[Bytes] 16K 24K 16K 16K 4K
Cache [KBytes] - - - -
DMAC [channels] 5 5 5 5
External interrupts [channels] 16 8 8 8
External bus - Yes Yes -
A/D converter [bits × channels] 10bit×16 10bit×32 10bit×24 10bit×32 10bit×11
D/A converter [bits × channels] - 8bit×2 - -
Timer
[channels]
16-bit 3 4 5 3 3 3
Output compare 16bit×8 16bit×2 16bit×2 16bit×6
Input capture 16bit×4 16bit×4 16bit×4 16bit×4
PPG timer 16bit×4 16bit×8 16bit×16 16bit×4 16bit×4
PWM timer - - - -
PWC timer - 16bit×1 16bit×1 16bit×1
Up/Down counter - - - -
Serial [ch annels] 5 7 4 4 2
I2C - - - -
UART/SIO 5 / - 7 / - 4 / - 4 / - 2 / -
Communication
[channels]
CAN 1 3 2 2 1
USB-Host - - - -
USB-Function - - - -
IE bus - - - -
LCD controller [seg × com] - 32×4 32×4 -
Inverter - - - Yes
VFD - - - -
Remarks CAN: 32Msg-buffer,LIN CAN: 32Msg-buffer, SMC *4ch, Sound generator *3ch, LIN CAN: 32Msg-buffer, SMC *6ch, LIN CAN: 32Msg-buffer
Evaluation chip MB91V210 MB91V220 MB91V245A MB91V265
Application B u i l t - i n C A N
Series name M B 9 1 2 7 0 M B 9 1 4 6 0
Product name MB91F272 2 MB91F272S*2 MB91F273 MB91F273S MB91F277*2 MB91F277S*2 MB91F278*2 MB91F278S*2 MB91461 MB91F464AA MB91F465BB
Package [pins] 100 176 100 144
Operating power supply voltage: VCC [V] 5 3 5
Maximum internal clock operating frequency [MHz] 32 80
Sub clock Yes - Yes - Yes - Yes - - Yes
Memory type Flash No ROM/External ROM Flash
ROM[Bytes] 256K 512K 256K 512K - 416K 544K
RAM[Bytes] 10K 24K 10K 24K 64K 16K 40K
Cache [KBytes] - 4 - 8
DMAC [channels] 5 5
External interrupts [channels] 16 16 10 16
External bus Yes Yes - Yes
A/D converter [bits × channels] 10bit×24 10bit×13 10bit×21 10bit×16
D/A converter [bits × channels] - -
Timer
[channels]
16-bit 3 5 8
Output compare 16bit×8 16bit×4 16bit×6 16bit×8
Input capture 16bit×8 16bit×4 16bit×8
PPG timer 16bit×8 16bit×8 16bit×10 16bit×16
PWM timer - -
PWC timer - -
Up/Down counter 8bit×2 - - 16bit×2
Serial [ch annels] 10 10 6 9
I2C 3 3 1 2
UART/SIO 7 / - 7 / - 5 / - 7 / -
Communication
[channels]
CAN 1 2 1 3
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - -
Inverter - -
VFD - -
Remarks CAN: 32Msg-buffer, LIN CAN: 32Msg-buffer, LIN, Clock superviser CAN: 32Msg-buffer, LIN CAN: 32Msg-buffer, LIN ,Sound Gnerator
Evaluation chip MB91V280 MB91V460
Application I n v e r t e r c o n t r o l
Series name M B 9 1 2 6 5 M B 9 1 4 7 0 M B 9 1 4 8 0 M B 9 1 2 6 0 B
Product name MB91266 MB91F267 MB91F475 MB91F478 MB91F479 MB91482*1 MB91F487 MB91263B MB91264B MB91F264B
Package [pins] 64 144 100 100
Operating power supply voltage: VCC [V] 5 5 5 5
Maximum internal clock operating frequency [MHz] 33 80 80 33
Sub clock - - - -
Memory type MASK Dual Op. Flash Flash MASK Flash MASK Flash
ROM[Bytes] 64K 128K 256K 384K 512K 256K 512K 128K 256K
RAM[Bytes] 2K 4K 16K 24K 32K 16K 32K 8K
Cache [KBytes] - - - -
DMAC [channels] 5 5 5 5
External interrupts [channels] 8 10 10 10
External bus - Yes - -
A/D converter [bits × channels] 10bit×11 10bit×12, 12bit×4×2 10bit×18 10bit×12
D/A converter [bits × channels] - - - -
Timer
[channels]
16-bit 3 2 2 3
Output compare 16bit×6 16bit×6 16bit×12 16bit×6
Input capture 16bit×4 16bit×4 16bit×8 16bit×4
PPG timer 16bit×4 16bit×4 16bit×8 16bit×8
PWM timer - - - -
PWC timer 16bit×1 - - 16bit×2
Up/Down counter - 16bit×1 - -
Serial [ch annels] 2 6ch (Multi Function Serial Interface: UART/SIO/I2C) 3ch (Multi Function Serial Interface: UART/SIO/I2C) 3
I2C - - - -
UART/SIO 2 / - - - 3 / -
Communication
[channels]
CAN - - - -
USB-Host - - - -
USB-Function - - - -
IE bus - - - -
LCD controller [seg × com] - - - -
Inverter Yes Yes Yes Yes
VFD - - - -
Remarks - Base Timer *4ch Base Timer *4ch -
Evaluation chip MB91V265 MB91V470 MB91V470 MB91V260B
Application B u i l t - i n C A N Bui l t - in LCD control ler
Series name M B 9 1 4 6 0 M B 9 1 2 3 0
Product name MB91F465KB MB91F465X MB91F467B MB91F467DB MB91F467R MB91F469G MB91233L MB91F233L MB91F233
Package [pins] 120 100 144 208 176 320 120
Operating power supply voltage: VCC [V] 5 3 3
Maximum internal clock operating frequency [MHz] 80 100 80 96 80 100 33.6
Sub clock Yes Yes
Memory type Flash MASK Flash
ROM[Bytes] 544K 1088K 2112K 256K
RAM[Bytes] 16K 32K 40K 64K 96K 16K
Cache [KBytes] 4 - 8 -
DMAC [channels] 5 -
External interrupts [channels] 10 11 16 14 16 16
External bus - - Yes -
A/D converter [bits × channels] 10bit×26 10bit×17 10bit×16 10bit×24 10bit×16 10bit×32 10bit×8
D/A converter [bits × channels] - 8bit×2
Timer
[channels]
16-bit 8 5 8 4
Output compare 16bit×8 16bit×6 16bit×8 16bit×4 16bit×8 16bit×4
Input capture 16bit×8 16bit×4 16bit×8 16bit×2
PPG timer 16bit×12 16bit×16 16bit×12 16bit×8 16bit×16 16bit×6
PWM timer - -
PWC timer - 8bit×2
Up/Down counter - 16bit×2 - 16bit×2 8bit×2
Serial [ch annels] 6 4 9 8 10 12 4
I2C 1 2 3 4 -
UART/SIO 5 / - 3 / - 7 / - 5 / - 7 / - 8 / - 4 / -
Communication
[channels]
CAN 1 2 6 3 2 6 -
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - 32×4 32×5 32×6
Inverter - -
VFD - -
Remarks CAN: 32Msg-buffer, LIN CAN: 32Msg-buffer, LIN, FlexRay CAN: 32Msg-buffer, LIN, Sound Generator CAN: 32,64Msg-buffer, LIN CAN: 128Msg-buffer, LIN, Sound Generator -
Evaluation chip MB91V460 MB91V230
*1: Under development *2: In planning
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
44 45
Application G e n e r a l - p u r p o s e
Series name M B 9 0 4 3 5
Product name MB90437L MB90437LS MB90438L MB90F438L MB90438LS MB90F438LS MB90439 MB90F439 MB90439S MB90F439S
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 16
Sub clock Yes - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 64K 128K 256K
RAM[Bytes] 2K 4K 6K
Cache [KBytes] -
DMAC [channels] -
External interrupts [channels] 8
External bus Yes
A/D converter [bits × channels] 10bit×8
D/A converter [bits × channels] -
Timer
[channels]
16-bit 2
Output compare 4
Input capture 6
PPG timer 8bit×2
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 3
I2C -
UART/SIO 2 / 1
Communication
[channels]
CAN -
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks -
Evaluation chip MB90V540G
Application G e n e r a l - p u r p o s e
Series name M B 9 0 4 5 5
Product name MB90455 MB90F455 MB90455S MB90F455S MB90456 MB90F456 MB90456S MB90F456S MB90457 MB90F457
Package [pins] 48
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 16
Sub clock Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 24K 32K 64K
RAM[Bytes] 2K
Cache [KBytes] -
DMAC [channels] -
External interrupts [channels] 4
External bus -
A/D converter [bits × channels] 10bit×8
D/A converter [bits × channels] -
Timer
[channels]
16-bit 16bit×2
Output compare -
Input capture 16bit×4
PPG timer 16bit×2
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 1
I2C -
UART/SIO 1 / -
Communication
[channels]
CAN -
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks -
Evaluation chip MB90V495G
Application G e n e r a l - p u r p o s e
Series name M B 9 0 4 5 5 M B 9 0 4 8 0 B M B 9 0 4 8 5 B M B 9 0 5 5 0 A
Product name MB90457S MB90F457S MB90F481B MB90F482B MB90483C MB90487B MB90488B MB90F488B MB90F489B MB90T552A MB90T553A MB90F553A
Package [pins] 48 100 100 100
Operating power supply voltage: VCC [V] 5 3 3 5
Maximum internal clock operating frequency [MHz] 16 25 25 16
Sub clock - Yes Yes -
Memory type MASK Flash Flash MASK Flash No ROM/External ROM Flash
ROM[Bytes] 64K 192K 256K 256K 192K 256K 384K - 128K
RAM[Bytes] 2K 4K 6K 16K 10K 24K 2K 4K
Cache [KBytes] - - - -
DMAC [channels] - 16 16 -
External interrupts [channels] 4 8 8 8
External bus - Yes Yes Yes
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8 10bit×8
D/A converter [bits × channels] - - - -
Timer
[channels]
16-bit 16bit×2 1 1 2
Output compare - 6 6 4
Input capture 16bit×4 2 2 4
PPG timer 16bit×2 16bit×3 16bit×3 8bit×6
PWM timer - - - -
PWC timer - - 3 -
Up/Down counter - 2 2 -
Serial [ch annels] 1 3 4 5
I2C - - 1 2
UART/SIO 1 / - 1 / 2 1 / 2 1 / 2
Communication
[channels]
CAN - - - -
USB-Host - - - -
USB-Function - - - -
IE bus - - - -
LCD controller [seg × com] - - - -
Inverter - - - -
VFD - - - -
Remarks - - - -
Evaluation chip MB90V495G MB90V480 MB90V485B MB90V550A
Application G e n e r a l - p u r p o s e
Series name M B 9 0 5 5 0 B M B 9 0 5 7 0 A MB90570C M B 9 0 8 6 0 E
Product name MB90552B MB90553B MB90573 MB90F574A MB90574C MB90867E MB90F867E MB90867ES MB90F867ES
Package [pins] 100 120 120 100
Operating power supply voltage: VCC [V] 5 5 5 5
Maximum internal clock operating frequency [MHz] 16 16 16 24
Sub clock - Yes Yes Yes -
Memory type MASK MASK Flash MASK MASK Flash MASK Flash
ROM[Bytes] 64K 128K 128K 256K 256K 128K
RAM[Bytes] 2K 4K 6K 10K 10K 6K
Cache [KBytes] - - - -
DMAC [channels] - - - 16
External interrupts [channels] 8 8 8 16
External bus Yes Yes Yes Yes
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8 10bit×24
D/A converter [bits × channels] - 8bit×2 8bit×2 -
Timer
[channels]
16-bit 2 - - 4
Output compare 4 4 4 8
Input capture 4 2 2 8
PPG timer 8bit×6 8bit×2 8bit×2 16bit×8
PWM timer - - - -
PWC timer - - - -
Up/Down counter - 8bit×2 8bit×2 -
Serial [ch annels] 5 6 6 6
I2C 2 1 1 2
UART/SIO 1 / 2 2 / 3 2 / 3 4 / -
Communication
[channels]
CAN - - - -
USB-Host - - - -
USB-Function - - - -
IE bus - - - -
LCD controller [seg × com] - - - -
Inverter - - - -
VFD - - - -
Remarks - - - -
Evaluation chip MB90V550A MB90V570A MB90V570A MB90V340E-102 MB90V340E-101
*1: Under development *2: In planning
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
46 47
Application G e n e r a l - p u r p o s e
Series name M B 9 0 8 8 0
Product name MB90882*2 MB90F882 MB90882S*2 MB90F882S MB90883*2 MB90883S*2 MB90F883A MB90F883AS MB90884*2 MB90884S*2 MB90F884A MB90F884AS
Package [pins] 100
Operating power supply voltage: VCC [V] 3
Maximum internal clock operating frequency [MHz] 33 25 33 25
Sub clock Yes - Yes - Yes - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 256K 384K 512K
RAM[Bytes] 16K 24K 30K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 24
External bus Yes
A/D converter [bits × channels] 10bit×20
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 6
Input capture 2
PPG timer 16bit×8
PWM timer -
PWC timer -
Up/Down counter 2
Serial [ch annels]
7ch (Multi Function, Serial Interface: UART/SIO/I2C)I2C
UART/SIO
Communication
[channels]
CAN -
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks 4ch Base-timer (16bit-reload timer/PWC/PPG/PWM selectable)
Evaluation chip MB90V880A-102 MB90V880A-101 MB90V880A-102 MB90V880A-101 MB90V880A-102 MB90V880A-101 MB90V880A-102 MB90V880A-101 MB90V880A-102 MB90V880A-101
*1: Under development *2: In planning
Application G e n e r a l - p u r p o s e B u i l t - i n U S B B u i l t - i n C A N
Series name MB90960 M B 9 0 9 8 0 M B 9 0 3 3 0 A M B 9 0 3 3 5 M B 9 6 3 0 0
Product name MB90F962 MB90982 MB90F983 MB90333A MB90334A MB90F334A MB90337 MB90F337 MB96F387 MB96F348 MB96F326 MB96F356
Package [pins] 48 64 120 64 120 100 80 64
Operating power supply voltage: VCC [V] 5 3 3 3 3 or 5
Maximum internal clock operating frequency [MHz] 24 25 24 24 56
Sub clock Yes Yes Yes - Yes
Memory type Flash MASK Flash MASK Flash MASK Dual Op. Flash Flash
ROM[Bytes] 64K 128K 192K 256K 384K 64K 416K 544K 288K
RAM[Bytes] 3K 10K 12K 16K 24K 4K 16K 24K 12K
Cache [KBytes] - - - - -
DMAC [channels] - 16 16 16 7 6 4
External interrupts [channels] 8 8 8 8 8 16 15 13
External bus - - Yes - Yes
A/D converter [bits × channels] 10bit×16 10bit×8 10bit×16 - 10bit×16 10bit×24 10bit×18 10bit×15
D/A converter [bits × channels] - - - - -
Timer
[channels]
16-bit 2 1 3 3 4
Output compare - 4 16bit×4 16bit×4 16bit×4 16bit×8 16bit×6 16bit×4
Input capture 16bit×4 2 16bit×4 16bit×4 16bit×8 16bit×12 16bit×6
PPG timer 16bit×2 16bit×2 16bit×3 16bit×3 16bit×8 16bit×16 16bit×20 16bit×20
PWM timer - - - - -
PWC timer - 2 16bit×1 16bit×1 -
Up/Down counter - 2 - - -
Serial [ch annels] 2 4 8 4 6 5
I2C - 1 3 1 1 2 1
UART/SIO 2 / - 1 / 2 4 / 1 2 / 1 5 / - 4 / -
Communication
[channels]
CAN - - - - 2
USB-Host - - 1 1 -
USB-Function - - 1 1 -
IE bus - - - - -
LCD controller [seg × com] - - - - 65×4 -
Inverter - - - - -
VFD - - - - -
Remarks LIN - - - Dual operation Flash -
Evaluation chip MB90V340E-102 MB90V485B MB90V330A MB90V330A MB96V300
Application B u i l t - i n C A N
Series name M B 9 0 3 4 0 E
Product name MB90341E MB90341ES MB90341CE MB90341CES MB90342E MB90F342E MB90342ES MB90F342ES MB90342CE MB90F342CE
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock Yes - Yes - Yes - Yes
Memory type MASK Flash MASK Flash MASK Flash
ROM[Bytes] 128K 256K
RAM[Bytes] 16K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 16
External bus Yes
A/D converter [bits × channels] 10bit×16 10bit×24 10bit×16 10bit×24
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×8
Input capture 16bit×8
PPG timer 16bit×8
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 4 6 4 6
I2C - 2 - 2
UART/SIO 4 / -
Communication
[channels]
CAN 2
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN
Evaluation chip MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102
Application B u i l t - i n C A N
Series name M B 9 0 3 4 0 E
Product name MB90342CES MB90F342CES MB90F343E MB90F343ES MB90F343CE MB90F343CES MB90F345E MB90F345ES MB90F345CE MB90F345CES
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock - Yes - Yes - Yes - Yes -
Memory type MASK Flash
ROM[Bytes] 256K 384K 512K
RAM[Bytes] 16K 20K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 16
External bus Yes
A/D converter [bits × channels] 10bit×24 10bit×16 10bit×24 10bit×16 10bit×24
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×8
Input capture 16bit×8
PPG timer 16bit×8
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 6 4 6 4 6
I2C 2 - 2 - 2
UART/SIO 4 / -
Communication
[channels]
CAN 2
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN
Evaluation chip MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
48 49
Application B u i l t - i n C A N
Series name M B 9 0 3 4 0 E
Product name MB90346E MB90F346E MB90346ES MB90F346ES MB90346CE MB90F346CE MB90346CES MB90F346CES MB90347E MB90F347E
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock Yes - Yes - Yes
Memory type MASK Flash MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 64K 128K
RAM[Bytes] 2K 6K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 16
External bus Yes
A/D converter [bits × channels] 10bit×16 10bit×24 10bit×16
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×8
Input capture 16bit×8
PPG timer 16bit×8
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 4 6 4
I2C - 2 -
UART/SIO 4 / -
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bu s -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN
Evaluation chip MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102
Application B u i l t - i n C A N
Series name M B 9 0 3 4 0 E
Product name MB90347ES MB90F347ES MB90347CE MB90F347CE MB90347CES MB90F347CES MB90348E MB90348ES MB90348CE MB90348CES
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock - Yes - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK
ROM[Bytes] 128K
RAM[Bytes] 6K 16K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 16
External bus Yes
A/D converter [bits × channels] 10bit×16 10bit×24 10bit×16 10bit×24
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×8
Input capture 16bit×8
PPG timer 16bit×8
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 4 6 4 6
I2C - 2 - 2
UART/SIO 4 / -
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN
Evaluation chip MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101
*1: Under development *2: In planning
Application B u i l t - i n C A N
Series name M B 9 0 3 4 0 E M B 9 0 3 5 0 E
Product name MB90349E MB90F349E MB90349ES MB90F349ES MB90349CE MB90F349CE MB90349CES MB90F349CES MB90351E MB90F351E
Package [pins] 100 64
Operating power supply voltage: VCC [V] 5 5
Maximum internal clock operating frequency [MHz] 24 24
Sub clock Yes - Yes - Yes
Memory type MASK Flash MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 256K 64K
RAM[Bytes] 16K 4K
Cache [KBytes] - -
DMAC [channels] 16 16
External interrupts [channels] 16 8
External bus Yes Yes
A/D converter [bits × channels] 10bit×16 10bit×24 10bit×15
D/A converter [bits × channels] - -
Timer
[channels]
16-bit 4 4
Output compare 16bit×8 16bit×4
Input capture 16bit×8 16bit×6
PPG timer 16bit×8 16bit×6
PWM timer - -
PWC timer - -
Up/Down counter - -
Serial [ch annels] 4 6 3
I2C - 1
UART/SIO 4 / - 2 / -
Communication
[channels]
CAN 1 1
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - -
Inverter - -
VFD - -
Remarks LIN LIN
Evaluation chip MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102
Application B u i l t - i n C A N
Series name M B 9 0 3 5 0 E
Product name MB90351ES MB90F351ES MB90351TE MB90F351TE MB90351TES MB90F351TES MB90352E MB90F352E MB90352ES MB90F352ES
Package [pins] 64
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Dual Op. Flash MASK Dual Op. Flash
ROM[Bytes] 64K 128K
RAM[Bytes] 4K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 8
External bus Yes
A/D converter [bits × channels] 10bit×15
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×4
Input capture 16bit×6
PPG timer 16bit×6
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 3
I2C 1
UART/SIO 2 / -
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN LIN, Low-voltage detection reset LIN
Evaluation chip MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
50 51
Application B u i l t - i n C A N
Series name M B 9 0 3 5 0 E
Product name MB90352TE MB90F352TE MB90352TES MB90F352TES MB90356E MB90F356E MB90356ES MB90F356ES MB90356TE MB90F356TE
Package [pins] 64
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock Yes - Yes - Yes
Memory type MASK Dual Op. Flash MASK Dual Op. Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 128K 64K
RAM[Bytes] 4K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 8
External bus Yes
A/D converter [bits × channels] 10bit×15
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×4
Input capture 16bit×6
PPG timer 16bit×6
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 3
I2C 1
UART/SIO 2 / -
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN, Low-voltage detection reset LIN, Clock Supervisor LIN, Clock Supervisor LIN, Low-voltage detection reset, Clock Supervisor
Evaluation chip MB90V340E-102 MB90V340E-101 MB90V340E-104 MB90V340E-103 MB90V340E-104
Application B u i l t - i n C A N
Series name M B 9 0 3 5 0 E
Product name MB90356TES MB90F356TES MB90357E MB90F357E MB90357ES MB90F357ES MB90357TE MB90F357TE MB90357TES MB90F357TES
Package [pins] 64
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock - Yes - Yes -
Memory type MASK Flash MASK Dual Op. Flash MASK Dual Op. Flash MASK Dual Op. Flash MASK Dual Op. Flash
ROM[Bytes] 64K 128K
RAM[Bytes] 4K
Cache [KBytes] -
DMAC [channels] 16
External interrupts [channels] 8
External bus Yes
A/D converter [bits × channels] 10bit×15
D/A converter [bits × channels] -
Timer
[channels]
16-bit 4
Output compare 16bit×4
Input capture 16bit×6
PPG timer 16bit×6
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 3
I2C 1
UART/SIO 2 / -
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN, Low-voltage detection reset, Clock Supervisor LIN, Clock Supervisor LIN, Low-voltage detection reset, Clock Supervisor
Evaluation chip MB90V340E-103 MB90V340E-104 MB90V340E-103 MB90V340E-104 MB90V340E-103
Application B u i l t - i n C A N
Series name M B 9 0 3 6 0 E
Product name MB90362E MB90F362E MB90362ES MB90F362ES MB90362TE MB90F362TE MB90362TES MB90F362TES MB90367E MB90F367E
Package [pins] 48
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 24
Sub clock Yes - Yes - Yes
Memory type MASK Flash MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 64K
RAM[Bytes] 3K
Cache [KBytes] -
DMAC [channels] -
External interrupts [channels] 8
External bus -
A/D converter [bits × channels] 10bit×16
D/A converter [bits × channels] -
Timer
[channels]
16-bit 2
Output compare -
Input capture 16bit×4
PPG timer 16bit×2
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 2 2 2 2 2 2 2 2 2 2
I2C -
UART/SIO 2 / - 2 / - 2 / - 2 / - 2 / - 2 / - 2 / - 2 / - 2 / - 2 / -
Communication
[channels]
CAN 1 1 1 1 1 1 1 1 1 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks LIN LIN, Low-voltage detection reset LIN, Clock Supervisor
Evaluation chip MB90V340E-102 MB90V340E-101 MB90V340E-102 MB90V340E-101 MB90V340A-104
Application B u i l t - i n C A N
Series name M B 9 0 3 6 0 E M B 9 0 3 8 5
Product name MB90367ES MB90F367ES MB90367TE MB90F367TE MB90367TES MB90F367TES MB90387 MB90F387 MB90387S MB90F387S
Package [pins] 48 48
Operating power supply voltage: VCC [V] 5 5
Maximum internal clock operating frequency [MHz] 24 16
Sub clock - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Dual Op. Flash MASK Flash
ROM[Bytes] 64K 64K
RAM[Bytes] 3K 2K
Cache [KBytes] - -
DMAC [channels] - -
External interrupts [channels] 8 4
External bus - -
A/D converter [bits × channels] 10bit×16 10bit×8
D/A converter [bits × channels] - -
Timer
[channels]
16-bit 2 2
Output compare - -
Input capture 16bit×4 16bit×4
PPG timer 16bit×2 16bit×2
PWM timer - -
PWC timer - -
Up/Down counter - -
Serial [ch annels] 2 1
I2C - -
UART/SIO 2 / - 1 / -
Communication
[channels]
CAN 1 1
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - -
Inverter - -
VFD - -
Remarks LIN, Clock Supervisor LIN, Low-voltage detection reset, Clock Supervisor -
Evaluation chip MB90V340A-103 MB90V340A-104 MB90V340A-103 MB90V495G
*1: Under development *2: In planning
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
52 53
Application B u i l t - i n C A N
Series name M B 9 0 3 9 0 M B 9 0 4 2 0 G M B 9 0 4 2 5 G
Product name MB90394HA MB90F394HA MB90423GA MB90F423GA MB90423GC MB90F423GC MB90427GA MB90427GC MB90428GA MB90F428GA
Package [pins] 120 100 100
Operating power supply voltage: VCC [V] 5 5 5
Maximum internal clock operating frequency [MHz] 24 16 16
Sub clock - - Yes - Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 384K 128K 64K 128K
RAM[Bytes] 10K 6K 4K 6K
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 8 8 8
External bus - - -
A/D converter [bits × channels] 10bit×15 10bit×8 10bit×8
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 4 2 2
Output compare 16bit×8 - -
Input capture 16bit×6 4 4
PPG timer 16bit×6 16bit×3 16bit×3
PWM timer - - -
PWC timer - - -
Up/Down counter - - -
Serial [ch annels] 5 4 2 2
I2C 1 - - -
UART/SIO 3 / 1 2 / - 2 / -
Communication
[channels]
CAN 2 2 1
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] - 24×4 24×4
Inverter - - -
VFD - - -
Remarks SMC: 6ch, Sound Generator Sound Generator Sound Generator
Evaluation chip MB90V390HB MB90V420G MB90V420G
Application B u i l t - i n C A N
Series name M B 9 0 4 2 5 G M B 9 0 4 9 5 G M B 9 0 5 4 0 G
Product name MB90428GC MB90F428GC MB90497G MB90F497G MB90F498G MB90543G MB90F543G MB90543GS MB90F543GS
Package [pins] 100 64 100
Operating power supply voltage: VCC [V] 5 5 5
Maximum internal clock operating frequency [MHz] 16 16 16
Sub clock Yes Yes Yes -
Memory type MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 128K 64K 128K 128K
RAM[Bytes] 6K 2K 6K
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 8 8 8
External bus - Yes Yes
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 2 2 2
Output compare - - 4
Input capture 4 4 8
PPG timer 16bit×3 16bit×1 16bit×4
PWM timer - - -
PWC timer - - -
Up/Down counter - - -
Serial [ch annels] 2 2 3
I2C - - -
UART/SIO 2 / - 2 / - 2 / 1
Communication
[channels]
CAN 1 1 2
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] 24×4 - -
Inverter - - -
VFD - - -
Remarks Sound Generator - -
Evaluation chip MB90V420G MB90V495G MB90V540G
*1: Under development *2: In planning
Application B u i l t - i n C A N
Series name M B 9 0 5 4 5 G M B 9 0 8 9 5 M B 9 0 9 2 0 M B 9 0 9 4 5
Product name MB90549G MB90F549G MB90549GS MB90F549GS MB90F897 MB90F897S MB90F922NA MB90F922NAS MB90F946A MB90947A MB90F947A MB90F949A
Package [pins] 100 48 120 100
Operating power supply voltage: VCC [V] 5 5 5 5
Maximum internal clock operating frequency [MHz] 16 16 32 24
Sub clock Yes - Yes - Yes - -
Memory type MASK Flash MASK Flash Dual Op. Flash Flash Flash MASK Flash
ROM[Bytes] 256K 64K 256K 384K 128K 256K
RAM[Bytes] 6K 2K 10K 16K 6K 12K
Cache [KBytes] - - - -
DMAC [channels] - - - 16
External interrupts [channels] 8 4 8 8
External bus Yes - - -
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8 10bit×15
D/A converter [bits × channels] - - - -
Timer
[channels]
16-bit 2 2 4 3
Output compare 4 - - 16bit×4
Input capture 8 4 16bit×8 16bit×6
PPG timer 16bit×4 16bit×2 16bit×6 16bit×6
PWM timer - - - -
PWC timer - - - -
Up/Down counter - - - -
Serial [ch annels] 3 2 4 5 4
I2C - - - 1
UART/SIO 2 / 1 2 / - 4 / - 3 / 1 2 / 1
Communication
[channels]
CAN 1 1 4 1
USB-Host - - - -
USB-Function - - - -
IE bus - - - -
LCD controller [seg × com] - - 32×4 -
Inverter - - - -
VFD - - - -
Remarks - Dual operation Flash Stepper Motor, Controller *4ch, Sound generator *2ch LIN
Evaluation chip MB90V540G MB90V495G MB90V920-102 MB90V920-101 MB90V390HB
Application B u i l t - i n C A N
Series name M B 9 0 5 4 5 G
Product name MB90F546G MB90F546GS MB90547G MB90547GS MB90548G MB90F548G MB90548GS MB90F548GS MB90F548GL MB90F548GLS
Package [pins] 100
Operating power supply voltage: VCC [V] 5
Maximum internal clock operating frequency [MHz] 16
Sub clock Yes - Yes - Yes - Yes -
Memory type Flash MASK Flash MASK Flash Flash
ROM[Bytes] 256K 64K 128K
RAM[Bytes] 8K 2K 4K
Cache [KBytes] -
DMAC [channels] -
External interrupts [channels] 8
External bus Yes
A/D converter [bits × channels] 10bit×8
D/A converter [bits × channels] -
Timer
[channels]
16-bit 2
Output compare 4
Input capture 8
PPG timer 16bit×4
PWM timer -
PWC timer -
Up/Down counter -
Serial [ch annels] 3
I2C -
UART/SIO 2 / 1
Communication
[channels]
CAN 1
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD -
Remarks -
Evaluation chip MB90V540G
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
54 55
Application B u i l t - i n L C D c o n t r o l l e r B u i l t - i n I E b u s B u i l t - i n V F D
Series name MB90378 M B 9 0 8 0 0 M B 9 0 5 8 0 M B 9 0 M 4 0 5
Product name MB90F378 MB90803 MB90804*2 MB90F804 MB90587C MB90587CA MB90M407 MB90M408 MB90MF408
Package [pins] 144 100 100 100
Operating power supply voltage: VCC [V] 3 3 5 3
Maximum internal clock operating frequency [MHz] 16 25 16 16
Sub clock Yes Yes Yes - -
Memory type Flash MASK Flash MASK MASK Flash
ROM[Bytes] 128K 128K 256K 64K 96K 128K
RAM[Bytes] 6K 4K 16K 4K 4K
Cache [KBytes] - - - -
DMAC [channels] - - - -
External interrupts [channels] 24 4 8 4
External bus - - Yes -
A/D converter [bits × channels] 10bit×12 10bit×12 10bit×8 10bit×16
D/A converter [bits × channels] 8bit×2 - 8bit×2 -
Timer
[channels]
16-bit 6 3 3 3
Output compare - 2 2 1
Input capture - 2 4 2
PPG timer 16bit×5 16bit×2 8bit×2 -
PWM timer - - - -
PWC timer - - 1 -
Up/Down counter - - - -
Serial [ch annels] 8 5 5 5
I2C 2 1 - 1
UART/SIO 3 / 3 2 / 2 5 / - 2 / 2
Communication
[channels]
CAN - - - -
USB-Host - - - -
USB-Function - - - -
IE bus - - 1 -
LCD controller [seg × com] 9×4 48×4 - -
Inverter - - - -
VFD - - - Yes
Remarks Bit decoder, PS/2 interface, LPC interface - - VFD
Evaluation chip MB90V378 MB90V800 MB90V580B MB90MV405
Application I n v e r t e r c o n t r o l
Series name M B 9 0 4 6 0 M B 9 0 5 6 0 M B 9 0 5 6 5 M B 9 0 8 2 0
Product name MB90462 MB90F462 MB90467 MB90561A MB90562A MB90F562B MB90567 MB90568 MB90F568 MB90822 MB90F822A MB90823 MB90F823A
Package [pins] 64 64 64 80
Operating power supply voltage: VCC [V] 5 5 3.3 5
Maximum internal clock operating frequency [MHz] 16 16 16 24
Sub clock - - - -
Memory type MASK Flash MASK MASK Flash MASK Flash MASK Flash MASK Flash
ROM[Bytes] 64K 32K 64K 96K 128K 64K 128K
RAM[Bytes] 2K 1K 2K 4K 4K
Cache [KBytes] - - - -
DMAC [channels] - - - -
External interrupts [channels] 8 8 8 8
External bus - - - -
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8 10bit×16
D/A converter [bits × channels] - - - 8bit×2
Timer
[channels]
16-bit 2 2 2 2
Output compare 6 6 6 6
Input capture 4 4 4 4
PPG timer 16bit×3 - - 16bit×3
PWM timer - - - -
PWC timer 2 1 - - 2
Up/Down counter - - - -
Serial [ch annels] 2 2 2 2
I2C - - - -
UART/SIO 2 / - - 2 / - 2 / -
Communication
[channels]
CAN - - - -
USB-Host - - - -
USB-Function - - - -
IE bu s - - - -
LCD controller [seg × com] - - - -
Inverter Yes Yes Yes Yes
VFD - - - -
Remarks - Wave Generator - -
Evaluation chip MB90V460 MB90V560 MB90V560 MB90V820
memo
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
56 57
Application G e n e r a l - p u r p o s e
Series name M B 9 5 1 0 0 A M M B 9 5 1 0 0 B
Product name MB95108AM MB95F108AM MB95107B MB95D108B 1 MB95F108B
Package [pins] 64 64
Operating power supply voltage: VCC [V] 5 3
Maximum internal clock operating frequency [MHz] 16 16
Sub clock Yes Yes
Memory type MASK Dual Op. Flash MASK Dual Op. Flash
ROM[Bytes] 60K 48K 60K
RAM[Bytes] 2K 2K
Cache [KBytes] - -
DMAC [channels] - -
External interrupts [channels] 12 12
External bus - -
A/D converter [bits × channels] 10bit×12 10bit×12
D/A converter [bits × channels] - -
Timer
[channels]
16-bit 3 3
Output compare - -
Input capture Yes*3 Yes*3
PPG timer Yes*3 Yes*3
PWM timer Yes*3 Yes*3
PWC timer Yes*3 Yes*3
Up/Down counter - -
Serial [ch annels] 5 5
I2C 1 1
UART/SIO 2 / 2 2 / 2
Communication
[channels]
CAN - -
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - -
Inverter - -
VFD - -
Remarks Selectable Reload Timer/PPG/PWM/PWC mode Dual operation Flash, selectable Reload Timer/PPG/PWM/PWC mode Selectable Reload Timer/PPG/PWM/PWC mode FRAM: 2KB built-in, dual operation Flash, selectable Reload Timer/PPG/PWM/PWC mode Dual operation Flash, selectable Reload Timer/PPG/PWM/PWC mode
Evaluation chip MB95FV100D-103 MB95FV100D-101
Application G e n e r a l - p u r p o s e
Series name M B 9 5 1 1 0 B M B 9 5 1 1 0 M M B 9 5 1 3 0 M MB95140 M B 8 9 1 9 0 / A / A H
Product name MB95116B*1 MB95F118B MB95117M*1 MB95F118M MB95136M MB95F136M MB95F146*1 MB89191AH MB89193AH
Package [pins] 48/52 52 28 32 28
Operating power supply voltage: VCC [V] 3 5 5 3 3 or 5
Maximum internal clock operating frequency [MHz] 16 16 16 16 4.2
Sub clock Yes Yes Yes Yes -
Memory type MASK Dual Op. Flash MASK Dual Op. Flash MASK Flash Flash MASK
ROM[Bytes] 32K 60K 48K 60K 32K 32K 4K 8K
RAM[Bytes] 1K 2K 2K 1K 1K 128 256
Cache [KBytes] - - - - -
DMAC [channels] - - - - -
External interrupts [channels] 8 8 8 8 11
External bus - - - - -
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8 10bit×8 8bit×8
D/A converter [bits × channels] - - - - -
Timer
[channels]
16-bit 2 2 1 1 1
Output compare - - - - -
Input capture - - - - -
PPG timer 16bit×3 16bit×3 16bit×2 16bit×2 -
PWM timer - - - - -
PWC timer - - - - -
Up/Down counter - - - - -
Serial [ch annels] 5 5 4 4 1
I2C 1 1 - - -
UART/SIO 2 / 2 2 / 2 2 / 2 2 / 2 - / 1
Communication
[channels]
CAN - - - - -
USB-Host - - - - -
USB-Function - - - - -
IE bus - - - - -
LCD controller [seg × com] - - - - -
Inverter - - - - -
VFD - - - - -
Remarks - Dual operation Flash - Dual operation Flash - One sector Flash One sector Flash Remote-controller carrier generator
Evaluation chip MB95FV100D-101 MB95FV100D-103 MB95FV100D-103 MB95FV100D-101 MB89PV190A
Application G e n e r a l - p u r p o s e
Series name M B 8 9 4 7 0 M B 8 9 5 3 0 A M B 8 9 6 3 0 R
Product name MB89475 MB89P475 MB89535A MB89537A MB89537AC MB89538A MB89538AC MB89F538 MB89F538L MB89635R MB89636R MB89637R
Package [pins] 48 64 64
Operating power supply voltage: VCC [V] 3 or 5 5 3 or 5 5 3 3 or 5
Maximum internal clock operating frequency [MHz] 12.5 12.5 10
Sub clock Yes Yes Yes
Memory type MASK OTP MASK Flash MASK
ROM[Bytes] 16K 16K 32K 48K 16K 24K 32K
RAM[Bytes] 512 512 1K 2K 512 768 1K
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 9 12 11 4
External bus - - Yes
A/D converter [bits × channels] 10bit×8 10bit×8 10bit×8
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 2 1 1
Output compare - - -
Input capture - - -
PPG timer - 6bit×1, 12bit×2 -
PWM timer 8bit×1 8bit×2 8bit×2
PWC timer 8bit×2 8bit×1 8bit×1
Up/Down counter - - -
Serial [ch annels] 2 3 4 3 4 3
I2C - - -
UART/SIO 2 / - 2 / 1 2 / 1
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] - - -
Inverter - - -
VFD - - -
Remarks - - -
Evaluation chip MB89PV470 MB89PV530 MB89PV630
Application G e n e r a l - p u r p o s e
Series name M B 8 9 1 9 0 / A / A H M B 8 9 2 0 2 / R
Product name MB89195 MB89P195 MB89195A MB89P195A MB89202 MB89F202RA MB89202 MB89F202RA
Package [pins] 28 32 34
Operating power supply voltage: VCC [V] 3 or 5 3 or 5
Maximum internal clock operating frequency [MHz] 4.2 12.5
Sub clock - -
Memory type MASK OTP MASK OTP MASK Flash MASK Flash
ROM[Bytes] 16K 16K
RAM[Bytes] 256 512
Cache [KBytes] - -
DMAC [channels] - -
External interrupts [channels] 11 11
External bus - -
A/D converter [bits × channels] - 8bit×8 10bit×8
D/A converter [bits × channels] - -
Timer
[channels]
16-bit 1 -
Output compare - -
Input capture - 8bit×2
PPG timer - 12bit×1
PWM timer - 8bit×1
PWC timer - -
Up/Down counter - -
Serial [ch annels] 1 2
I2C - -
UART/SIO - / 1 1 / 1
Communication
[channels]
CAN - -
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] - -
Inverter - -
VFD - -
Remarks Remote-controller carrier generator Buzzer output
Evaluation chip MB89PV190 MB89PV190A MB89V201
*1: Under development *2: In planning *3: Composite timer (various selectable timers)
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
58 59
Application G e n e r a l - p u r p o s e B u i l t - i n U S B
Series name M B 8 9 9 3 0 B M B 8 9 0 5 1 M B 8 9 5 8 0 B / B W
Product name MB89935B MB89P935B MB89051 MB89F051 MB89583B MB89583BW MB89585B MB89P585B MB89585BW MB89P585BW
Package [pins] 30 64 64
Operating power supply voltage: VCC [V] 3 or 5 3 or 5 3 or 5
Maximum internal clock operating frequency [MHz] 10 12 12.5
Sub clock - - - - - - - -
Memory type MASK OTP MASK Flash MASK OTP MASK OTP
ROM[Bytes] 16K 32K 8K 16K
RAM[Bytes] 512 2K 512 1K
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 11 7 8
External bus - - -
A/D converter [bits × channels] 10bit×8 - -
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 1 - -
Output compare - - -
Input capture - - -
PPG timer 12bit×1 - -
PWM timer 8bit×1 8bit×2 8bit×2
PWC timer - - -
Up/Down counter - - -
Serial [ch annels] 2 4 1
I2C - 1 -
UART/SIO 1 / 1 1 / 2 1 / -
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - 1 1
IE bus - - -
LCD controller [seg × com] - - -
Inverter - - -
VFD - - -
Remarks - USB-function: End point4 -
Evaluation chip MB89PV930A MB89F051 MB89P585B MB89P585BW MB89P585B MB89P585BW
Application I n v e r t e r c o n t r o l B u i l t - i n L C D c o n t r o l l e r
Series name M B 8 9 8 5 0 R MB95120 M B 9 5 1 2 0 M B M B 9 5 1 5 0 M M B 9 5 1 6 0 M
Product name MB89855R MB89P857 MB89W857 MB95F128 1 MB95F128MB MB95F156M MB95F168M 1
Package [pins] 64 100 100 48/52 64
Operating power supply voltage: VCC [V] 3 or 5 3 5 5 5
Maximum internal clock operating frequency [MHz] 10 16 16 16 16
Sub clock - Yes Yes Yes Yes
Memory type MASK OTP EEPROM Dual Op. Flash Dual Op. Flash Flash Flash
ROM[Bytes] 16K 32K 60K 60K 32K 60K
RAM[Bytes] 512 1K 2K 2K 1K 2K
Cache [KBytes] - - - - -
DMAC [channels] - - - - -
External interrupts [channels] 4 12 12 8 8
External bus Yes - - - -
A/D converter [bits × channels] 10bit×8 10bit×12 10bit×12 10bit×8 10bit×8
D/A converter [bits × channels] - - - - -
Timer
[channels]
16-bit - 3 3 1 2
Output compare 8bit×4 - - - -
Input capture - Yes Yes Yes Yes
PPG timer - Yes Yes Yes Yes
PWM timer 8bit×2 Yes Yes Yes Yes
PWC timer - Yes Yes Yes Yes
Up/Down counter 10bit×1 - - - -
Serial [ch annels] 2 5 5 4 5
I2C - 1 1 - 1
UART/SIO 1 / 1 2 / 2 2 / 2 2 / 2 2 / 2
Communication
[channels]
CAN - - - - -
USB-Host - - - - -
USB-Function - - - - -
IE bus - - - - -
LCD controller [seg × com] - 40×4 40×4 16×4 32×4
Inverter Yes - - - -
VFD - - - - -
Remarks - Dual operation Flash, selectable Reload Timer/PPG/PWM/PWC modes, also has 16-bit mode
Evaluation chip MB89P857 MB95FV100D-101/MB95FV100D-102 MB95FV100D-103
Application B u i l t - i n L C D c o n t r o l l e r
Series name M B 8 9 5 6 0 / A / H M B 8 9 8 0 0 M B 8 9 8 2 0
Product name MB89567A MB89567AC MB89P568 MB89803 MB89805 MB89P808 MB89821 MB89823R MB89825 MB89P825
Package [pins] 80 100 80
Operating power supply voltage: VCC [V] 3 or 5 3 or 5 3 or 5
Maximum internal clock operating frequency [MHz] 12.5 10 5
Sub clock Yes - -
Memory type MASK OTP MASK OTP MASK OTP
ROM[Bytes] 32K 48K 8K 16K 48K 4K 8K 16K 16K
RAM[Bytes] 1K 256 512 2K 128 256
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 12 2 2
External bus - - -
A/D converter [bits × channels] 10bit×8 - -
D/A converter [bits × channels] - - -
Timer
[channels]
16-bit 1 - -
Output compare - - -
Input capture - - -
PPG timer 6bit×1, 12bit×1 - -
PWM timer 8bit×2 8bit×1 8bit×1
PWC timer 8bit×1 - 8bit×1 8bit×1
Up/Down counter - - -
Serial [ch annels] 3 4 2 2
I2C - 1 - -
UART/SIO 2 / 1 1 / 1 1 / 1
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] 24×4 70×4 50×4
Inverter - - -
VFD - - -
Remarks - - DTMF Generator
Evaluation chip MB89PV560 MB89PV800 MB89PV820
Application B u i l t - i n L C D c o n t r o l l e r
Series name M B 8 9 4 8 0 M B 8 9 4 9 0 M B 8 9 5 5 0 A
Product name MB89485L MB89P485L MB89485 MB89P485 MB89498 MB89F499 MB89557A MB89558A MB89P558A
Package [pins] 64 100 100
Operating power supply voltage: VCC [V] 3 3 or 5 5 3 3 3 or 5
Maximum internal clock operating frequency [MHz] 12.5 12.5 12.5
Sub clock Yes Yes Yes
Memory type MASK OTP MASK OTP MASK Flssh MASK OTP
ROM[Bytes] 16K 48K 60K 32K 48K
RAM[Bytes] 512 2K 1K 2K
Cache [KBytes] - - -
DMAC [channels] - - -
External interrupts [channels] 12 16 16
External bus - - -
A/D converter [bits × channels] 10bit×4 10bit×8 10bit×8
D/A converter [bits × channels] - - 8bit×2
Timer
[channels]
16-bit 2 2 3
Output compare - - -
Input capture - - -
PPG timer 6bit×1 - 6bit×1
PWM timer 8bit×1 8bit×2 8bit×2
PWC timer 8bit×1 - 8bit×1
Up/Down counter - - -
Serial [ch annels] 1 2 2
I2C - 1 -
UART/SIO 1 / - 1 / 1 2 / -
Communication
[channels]
CAN - - -
USB-Host - - -
USB-Function - - -
IE bus - - -
LCD controller [seg × com] 31×4 32×4 32×4
Inverter - - -
VFD - - -
Remarks - - -
Evaluation chip MB89PV480 MB89PV490 MB89PV550A
*1: Under development 2: In planning
Product selection
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollersFujitsu microcontrollers
60 61
Application B u i l t - i n L C D c o n t r o l l e r
Series name M B 8 9 9 2 0 M B 8 9 9 4 0
Product name MB89923 MB89925 MB89P928 MB89943 MB89945 MB89P945
Package [pins] 80 48
Operating power supply voltage: VCC [V] 3 or 5 5
Maximum internal clock operating frequency [MHz] 8 8
Sub clock - -
Memory type MASK OTP MASK OTP
ROM[Bytes] 8K 16K 48K 8K 16K
RAM[Bytes] 256 512 1K 512
Cache [KBytes] - -
DMAC [channels] - -
External interrupts [channels] 4 3
External bus - -
A/D converter [bits × channels] 10bit×8 10bit×2
D/A converter [bits × channels] - -
Timer
[channels]
16-bit - 1
Output compare 16bit×2 -
Input capture 16bit×2 -
PPG timer - -
PWM timer 8bit×2 8bit×2
PWC timer - -
Up/Down counter - -
Serial [ch annels] 2 -
I2C - -
UART/SIO 1 / 1 -
Communication
[channels]
CAN - -
USB-Host - -
USB-Function - -
IE bus - -
LCD controller [seg × com] 24×4 17×4
Inverter - -
VFD - -
Remarks Low Volt. Detection Reset Stepping motor controller×2ch, Low Volt. Detection Reset, Ext.Volt. Monitor Int.
Evaluation chip MB89PV920 MB89PV940
Application B u i l t - i n V F D
Series name M B 8 9 1 4 0
Product name MB89143A MB89144A MB89145 MB89146 MB89P147
Package [pins] 64
Operating power supply voltage: VCC [V] 5 3 or 5
Maximum internal clock operating frequency [MHz] 8
Sub clock Yes
Memory type MASK OTP
ROM[Bytes] 8K 12K 16K 24K 32K
RAM[Bytes] 256 512 768 1K
Cache [KBytes] -
DMAC [channels] -
External interrupts [channels] 2
External bus -
A/D converter [bits × channels] 8bit×8 10bit×12
D/A converter [bits × channels] -
Timer
[channels]
16-bit -
Output compare -
Input capture -
PPG timer - 12bit×1
PWM timer 8bit×2 8bit×3
PWC timer -
Up/Down counter -
Serial [ch annels] 1
I2C -
UART/SIO - / 1
Communication
[channels]
CAN -
USB-Host -
USB-Function -
IE bus -
LCD controller [seg × com] -
Inverter -
VFD Yes
Remarks VFD
Evaluation chip MB89PV140
32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollers
memo 32/1
6/8-
bit c
ore
lineu
pRO
M, R
AM, P
ins
Appl
icat
ions
Func
tiona
lity
Deve
lopm
ent
assi
stan
ce to
ols
Prod
uct s
elec
tion
32bit
16bit
8bit
Fujitsu microcontrollers
Product selection