Fuel level sensor for telematics integration
-
Upload
yury-lavrentiev -
Category
Automotive
-
view
96 -
download
4
Transcript of Fuel level sensor for telematics integration
-
Fuel level sensor
Models
Installation
Documents
Features and characteristics
Purpose of use and application
Minsk, Belaruswww.jv-technoton.com
FUEL MONITORING EXPERT
http://www.jv-technoton.comhttp://www.jv-technoton.com
-
Fuel level sensor
Purpose of use and application
DUT-E fuel level sensors designed to measure level of liquid fuel and other nonconductive liquids in vehicle and stationary tanks.
DUT-E are used in GPS vehicle monitoring and fuel consumption control systems as additional fuel sensor or as a replacement of standard (factory built-in) fuel level sensors.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Monitoring of fuel tank fuelling and draining
Detecting fuel thefts
Fuel consumption monitoring
FUEL MONITORING EXPERTPurpose of use and application
http://www.jv-technoton.com
-
Models
Fuel level sensor
FUEL MONITORING EXPERT
XType of output signal::
F analog, voltage 1.5-9.0 V; frequency, 500-1500 Hz 5 analog, voltage 1.5-4.5 V10 analog, voltage 2.5-9.0 V232 digital, interface RS-232485 digital, interface RS-485CAN digital, interface CAN 2.0B
Y LSymbols for special sensor modifications:
Base - fuel level sensor measuring head
Nominal length of the measuring part (mm):
A5, A10: 350; 500; 700
AF, 232, 485, CAN: 700; 1000
http://www.jv-technoton.com
-
Fuel level sensor
Features and characteristics/unit structure
Fuel level sensor head with printed circuit board inside
Interface cable with connector plug
Measuring probe
Spring catch,screen filter
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Features and characteristics/spring catch
increases durability of fastening; protects the sensor and the tank from
damage caused by swinging fuel.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Features and characteristics/screen filter
easy and quick installation; protection against water and mud; protection against fuel foam (during the tank calibration).
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Features and characteristics/example of data
The sensor measures fuel level in the tank and generates an output signal to forward it to a vehicle tracking device.
Tracking device records and processes the sensor data for further transmission to the telematics server. Server software processes and analyzes the received data to generate analytical reports for a selected period of time.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/determine installation location
Geometrical center of the fuel tank is recommended.
This will reduce measurement errors caused by fuel level deviation during driving.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/probe cutting
Before installing DUT-E fuel level sensor it is necessary to cut a probe.
It is required to leave a 25 mm gap between the edge of the measuring probe and the tank bottom.
DUT-E AF/232/485/CAN allow cut off up to any required probe length with mandatory further calibration.
DUT-E A5/A10/I allow cut off up to 30 % of the initial length of the measuring probe with no further calibration.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/length extension
Length extension is performed by fastening KDC additional sections to the measuring probe of DUT-E sensor.
Model range of DUT-E additional sections includes: KDC 250, KDC 500 and KDC 1000 with lengths of 250, 500 and 1000 mm respectively.
DUT-E AF/232/485/CAN can be extended up to 6000 mm length.
DUT-E additional sections can be cut to necessary size.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/ergonomic bayonet-type fastening
easy installation; easy maintenance.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/electrical connection
DUT-E A5, DUT-E A10
DUT-E AF
DUT-E 232, DUT-E 485
DUT-E CAN
1 output signal;2 ground;3 power supply.
1 power supply;2 ground;3 K-line;4 output signal.
1 power supply;2 ground;3 received data ;4 transmitted data .
1 power supply;2 ground;3 CAN High;4 CAN Low;5 K-line.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Installation/monitoring of two and more tanks
DUT-E SUM AF (DUT-E SUM 232) summator is used together with DUT-E AF (DUT-E 232) sensors on vehicles with two and more fuel tanks for measuring total amount of fuel.
DUT-E SUM summator: low cost; easy to install; needs no configuration.
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Documents/approval of automotive manufacturers
DUT-E fuel level sensor installation
approved by automotive manufacturers:
AMAZ (buses);
MAZ (trucks);
MAZ-MAN (trucks);
MZKT (oversize load trucks).
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Documents/certificates
Certificate of Conformity to the electromagnetic compatibility requirements
Certificate of electromagnetic compatibility (EMC)
Pattern approval certificate of measuring instruments
Certificate of safety of wheeled vehicles
Explosion-proof certificate (Russia)
ISO 9001-2009 Certificate of Quality Management System
FUEL MONITORING EXPERT
http://www.jv-technoton.com
-
Fuel level sensor
Documents/compatibility with tracking devices
CKPT 31/CKPT 25/CKPT 45Auto GRAPH GSM+/Auto GRAPH GSM (GLONASS)
MapOn GBOX6
NaviFleet ET100
Naviset GT-10
SKAUT MT-530/SKAUT MT-600 GP PRO
BCE Fm Blue/BCE Fm Light
VOYAGER 2
GALILEOSKY GPS/GALILEOSKY GLONASS
BK11-02
Locarus 702X/Locarus 702R/Locarus 702S
Ruptela FM-Pro3
Relevant information at www.jv-technoton.com
FUEL MONITORING EXPERT
http://www.jv-technoton.comhttp://www.jv-technoton.com/compatibility_with_tracking_devices
Fuel level sensorPurpose of use and application/1 Purpose of use and application/2ModelsFeatures and characteristics/unit structure Features and characteristics/spring catchFeatures and characteristics/screen filterFeatures and characteristics/example of dataInstallation/determine installation locationInstallation/probe cuttingInstallation/length extensionInstallation/ergonomic bayonet-type fasteningInstallation/electrical connectionInstallation/monitoring of two and more tanksDocuments/approval of automotive manufacturersDocuments/certificatesDocuments/compatibility with tracking devices