FTTH Conference 2011 Workshop Standardization Work for FTTH Infrastructure Albert Grooten DRAKA
12
INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC SB4/ACT: White Paper on Standardization Work for FTTH Infrastructure Albert Grooten Member, IEC SB4/ACT [email protected]
-
Upload
ceobroadband -
Category
Technology
-
view
868 -
download
1
description
FTTH Conference 2011 Workshop Standardization Work for FTTH Infrastructure Albert Grooten DRAKA
Transcript of FTTH Conference 2011 Workshop Standardization Work for FTTH Infrastructure Albert Grooten DRAKA
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC SB4/ACT: White Paper on Standardization Work for FTTH Infrastructure
Albert GrootenMember, IEC SB4/[email protected]
8 February, 2011 2Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
White Paper on Standardization Work in the Area of FTTX & FITH
Contents: •Introduction•Recommended Terminology•Major Standardization Activities & Guidelines •Conclusions and Recommendations
ANNEX 1: List of Members and Guests of the Study GroupANNEX 2: Network Scheme + Network ElementsANNEX 3: List of Terms and AbbreviationsANNEX 4: List of Standards and Guidelines related to FTTX / FITH
8 February, 2011 3Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
•Introduction
•The intent of this work is to give an overview of existing standards and guidance documents in the area of FTTX/FITH (or relevant for FTTX/FITH) and work in progress, as well as recommendations for additional standardization work that may be needed.
•This document has been developed by an ad hoc study group within IEC SB4/ACT consisting of experts from IEC, ITU-T, CENELEC etc.
ANNEX 1: List of Members and Guests of the Study Group
8 February, 2011 4Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
ANNEX 1: List of Members and Guests of the Study Group
Name Tel E-mail
Daems Daniel Mr. +32 (0) 16 351595 [email protected]
Grooten Albert Mr. +31 182 592 443 [email protected]
Jones Greg Mr. +44 22 730 5515 [email protected]
Komfort Michael Dr. +49 30 5303 2170 [email protected]
Leppert Hans-Detlef
Dr. +49 2166 958 648 [email protected]
von Pattay
Walter Dr.-Ing.
+49 89 923 967 57 [email protected]
Roche Dominique
Mr. +33 1 57 36 20 21 [email protected]
Rossi Umberto Dr. [email protected].
8 February, 2011 5Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
•Recommended Terminology
To ensure clarity and consistency in communication there should be a common set of Terms, Definitions and Abbreviations.In January 2009 the FTTH Council has released a document that well defines terms used by all the FTTH Councils (North-America, Europe, and Asia-Pacific).
The study group recommends this as a referenceANNEX 2: Network Scheme + Network ElementsANNEX 3: List of Terms and Abbreviations
8 February, 2011 6Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
ANNEX 2: Network Scheme + Network Elements [PoP + OSP]
Main Network Elements (PoP + OSP) Network Part CodeAccess Node POPAccess Node Optical frame POP-ODFAccess Node Cabling POP-CFeeder Cabling Fe-CPrimary Fiber Concentration Point PCPDistribution Cabling Di-CSecondary Fibre Concentration Point SCPFiber Concentration Point FCPDrop Cabling Dr-CResidential property cabling Re-CPassive Customer Outlet Box & Customer Equipment Units COBSingle Family Unit SFUMulti Dwelling Unit MDUDistribution Network OF Cables DNCTrunk Network OF cables TNC
8 February, 2011 7Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
ANNEX 2: Network Scheme + Network Elements [In-Building]
Main Network Element (In-Building) Network Part Code
Building Distribution Box BDBBuilding Riser Cabling BRi-CFloor Distribution Box FDBFloor Tapping Box FTBBuilding Drop Cabling BDr-CResidential property cabling Re-CPassive Customer Outlet Box & Customer Equipment Units COBBuilding Access Network B-A-NBuilding indoor OF Cables BIC
Main Network Element (General Terms) Network Part Code
Access Network A-NOutside Plant part of Network OSPIn Building part of Network IndoorElements / Terms Non-specific for Access Networks Cabling None
8 February, 2011 8Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
ANNEX 3: List of Terms and Abbreviations
A-N161-06-12a device whose bandwidth is such that it is able to accept and process all the spectral components of a particular emission
Broadband device
A-NTechBPON(Broadband PON) is a standard based on APON.
704-16-07the number of binary digits transferred per second bit rate Binary digit rate
723-10-09a member of a set of two elements used to represent informationbitBinary digit
721-02-08
a member of a set of two elements commonly used to represent information
NOTE – The terms "unit element" and "unit" used in telegraph transmission may not be used for the term bit
bitBinary digit
A-N702-05-03a member of a set of two elements commonly used to represent informationbitBinary digit
Part of NetworkType6)Source / OriginDefinition5)ITU Definition4)IEV Number2)IEC Definition1)AbbreviationFull Name = Term
http://www.electropedia.org/
Connectivity termConDefinition -other Source / OriginITU Definition
Number in Electropedia
database
Definition from IEV (Electropedia) database
Network conceptNC5)4)2)1)
A-N161-06-12a device whose bandwidth is such that it is able to accept and process all the spectral components of a particular emission
Broadband device
A-NTechBPON(Broadband PON) is a standard based on APON.
704-16-07the number of binary digits transferred per second bit rate Binary digit rate
723-10-09a member of a set of two elements used to represent informationbitBinary digit
721-02-08
a member of a set of two elements commonly used to represent information
NOTE – The terms "unit element" and "unit" used in telegraph transmission may not be used for the term bit
bitBinary digit
A-N702-05-03a member of a set of two elements commonly used to represent informationbitBinary digit
Part of NetworkType6)Source / OriginDefinition5)ITU Definition4)IEV Number2)IEC Definition1)AbbreviationFull Name = Term
http://www.electropedia.org/
Connectivity termConDefinition -other Source / OriginITU Definition
Number in Electropedia
database
Definition from IEV (Electropedia) database
Network conceptNC5)4)2)1)
8 February, 2011 9Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
•Major Standardization Activities & Guidelines
There are standardization activities on international and national level:
•IEC TC 86, SC 86A, SC 86B, SC 86C•ISO/IEC JTC 1/SC 25•ITU-T Handbook on Optical fibres, cables and systems (2009)http://www.itu.int/publ/T-HDB-OUT.10-2009-1/en•ITU-T Study Group 15•CENELEC Technical Report CLC/TR 50510•IEEE P802.3•FTTH COUNCIL EUROPE: FTTH Handbook, 4th edition issued in Feb. 2011•Broadband Forum (BBF)•ETSI ATTM•Other groups: ATIS (US), CCSA (China)
ANNEX 4: List of Standards and Guidelines related to FTTX / FITH
8 February, 2011 10Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
ANNEX 4: List of Standards and Guidelines related to FTTX / FITH
IntOF Test Method60793-1-43 Ed. 1.0Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical apertureStandardPUBA - NIEC
IntOF Test Method60793-1-42 Ed. 2.0Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersionStandardPUBA - NIEC
IntOF Test Method60793-1-41 Ed. 2.0Optical fibres - Part 1-41: Measurement methods and test procedures - BandwidthStandardPUBA - NIEC
IntOF Test Method60793-1-40 Ed. 1.0Optical fibres - Part 1-40: Measurement methods and test procedures - AttenuationStandardPUBA - NIEC
IntOF Test Method60793-1-34 Ed. 2.0Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curlStandardPUBA - NIEC
IntOF Test Method60793-1-33 Ed. 1.0Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibilityStandardPUBA - NIEC
IntOF Test Method60793-1-32 Ed. 1.0Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippabilityStandardPUBA - NIEC
IntOF Test Method60793-1-31 Ed. 1.0Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strengthStandardPUB CDV Ed. 2A - NIEC
IntOF Test Method60793-1-30 Ed. 1.0Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof testStandardPUB CDV Ed. 2A - NIEC
IntOF Test Method60793-1-22 Ed. 1.0Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurementStandardPUBA - NIEC
IntOF Test Method60793-1-21 Ed. 1.0Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometryStandardPUBA - NIEC
IntOF Test Method60793-1-20 Ed. 1.0Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometryStandardPUBA - NIEC
IntOF Test Method60793-1-1 Ed. 3.0Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidanceStandardPUBA - NIEC
Int/Reg/ NatSubjectNumberTitleTypeStatusLocation
in n/wSource
IntOF Test Method60793-1-43 Ed. 1.0Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical apertureStandardPUBA - NIEC
IntOF Test Method60793-1-42 Ed. 2.0Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersionStandardPUBA - NIEC
IntOF Test Method60793-1-41 Ed. 2.0Optical fibres - Part 1-41: Measurement methods and test procedures - BandwidthStandardPUBA - NIEC
IntOF Test Method60793-1-40 Ed. 1.0Optical fibres - Part 1-40: Measurement methods and test procedures - AttenuationStandardPUBA - NIEC
IntOF Test Method60793-1-34 Ed. 2.0Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curlStandardPUBA - NIEC
IntOF Test Method60793-1-33 Ed. 1.0Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibilityStandardPUBA - NIEC
IntOF Test Method60793-1-32 Ed. 1.0Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippabilityStandardPUBA - NIEC
IntOF Test Method60793-1-31 Ed. 1.0Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strengthStandardPUB CDV Ed. 2A - NIEC
IntOF Test Method60793-1-30 Ed. 1.0Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof testStandardPUB CDV Ed. 2A - NIEC
IntOF Test Method60793-1-22 Ed. 1.0Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurementStandardPUBA - NIEC
IntOF Test Method60793-1-21 Ed. 1.0Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometryStandardPUBA - NIEC
IntOF Test Method60793-1-20 Ed. 1.0Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometryStandardPUBA - NIEC
IntOF Test Method60793-1-1 Ed. 3.0Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidanceStandardPUBA - NIEC
Int/Reg/ NatSubjectNumberTitleTypeStatusLocation
in n/wSource
8 February, 2011 11Pre-Conference Workshop on Standardization
Standardization of FTTH Networks
Conclusions and Recommendations
Definitions:There is a lack of generally used FTTH related definitions.The Study Group recommends to use the FTTH Definition of Termsissued by the three FTTH Councils in order to improve Electropedia and all organizations to use these definitions.
Standards:For the OSP part of the network standardization is covered by existing standards and running projects.For the In-Building part of the network standards are available for the cable part of the network infrastructure.
Network Areas / components where standardization is still missing:•Access Node (POP), especially the Optical Frames•Connectivity Products in the In-Building Network:
BDB, FDB, FTB and COB and their related cable systems.
INTERNATIONAL ELECTROTECHNICAL COMMISSION
Thank you for your attention!
Any questions?
www.iec.ch
