FSFU Union Pipe
-
Upload
arturojimenez72 -
Category
Documents
-
view
217 -
download
0
Transcript of FSFU Union Pipe
-
7/30/2019 FSFU Union Pipe
1/21
Forged Stee
FittingS
& UnionS
-
7/30/2019 FSFU Union Pipe
2/21
SaleS Center/WarehouSe14496 Croghan Pike
P.o. Box 330Mt. union, Pa 17066
(814) 542-2545 (800) 231-0655(800) 345-7546 Fax (814) 542-9977
www.byf.cm-m: [email protected]
-
7/30/2019 FSFU Union Pipe
3/21
-
7/30/2019 FSFU Union Pipe
4/213
This catalog lists for your convenience
the complete line of Bonney Forge steel
fittings and unions including:
ForgedSteelFittings
MSSSP-83Unions
RockwoodUnions
LugNutUnions
QuikLeg90
-
7/30/2019 FSFU Union Pipe
5/21
Pressure Ratings for Bonney Forge
Forged Steel Fittings comply with
ASME B16.11. The allowable pressure
rating for fittings are equivalent to the
pressure ratings of the corresponding
pipe listed in the table below.
The fitting is suitable for the application
if the wall thickness of the selected
pipe is equal to or less than the
ASME B36.10M Schedule No. or
Wall Designation pipe wall thickness
correlated with the fitting in the
table below.
The maximum pressure rating of comparable pipe material to fitting material can be
calculated. Such calculations are in accordance to the ASME Piping Codes, as an example,
ASME B31.1 2010, Power Piping, Paragraph 104.1.21 which outlines the following
variables and equation:
P = Pressure Rating
SE = Allowable Stress (@temperature) (Reference ASME B31.3. Table A-1)
tm = Wall Thickness
A = Corrosion Allowance (Typically = 0)
Do = Outer Diameter of Pipe
Y = Table 104.1.2 (A) of ASME B31.1 (0.4 if temperature is less than 900F)
4
Technical DaTa
Forged Fittings: AsMe B16.11 - tab 71
ClAss oF Fitting type size pipe used For rAting BAsis
2000 Threaded NPS 1/8 - 4 Schedule 80 (SCH 80) / Extra Strong (XS)
3000 Threaded NPS 1/8 - 4 Schedule 160 (SCH 160)
6000 Threaded NPS 1/8 - 4 Double Extra Strong (XXS)
3000 SockeT-weld NPS 1/8 - 4 Schedule 80 (SCH 80) / Extra Strong (XS)
6000 SockeT-weld NPS 1/8 - 4 Schedule 160 (SCH 160)
9000 SockeT-weld NPS 1/8 - 4 Double Extra Strong (XXS)
PiPe ScheDule equivalency
PiPe PreSSure calculaTionS
P =2 Se (tm a)
d 2y (tm a)
1Reprinted from ASME B31.1 2010, by permission of The American Society of Mechanical Engineers.
All rights reserved. No further copies can be made without written permission.
-
7/30/2019 FSFU Union Pipe
6/21
The calculated pipe pressure in accordance to ASME B31.3 Process Piping 2 are
calculated in accordance with Para. 304.1.2. Please see the equations and variables below:
P = Pressure Rating
D = Outer Diameter of Pipe
S = Allowable Stress (@ Temperature): Table A-1
E = Quality Factor: Table A-1A or A-1B
W = Weld Joint Strength Reduction Factor: Para. 302.3.5(e) (Typically = 1.0)
t = Pipe Wall Thickness
Y = Table 304.1.1 or Intermediate Temperature Interpolations (Below Equation)
D = Outer Diameter of Pipe
d = Inside Diameter of Pipe
c = Sum of Mechanical Allowances plus Corrosion and Erosion Allowances
Threaded: Dimension H of ASME B1.20.1 or Equivalent
Machined Surfaces or Grooves: Specified Tolerance (or 0.02in plus Specified Depth of Cut; when tolerance is not specified)
5
t =Pd
2 (Sew + PY)
y =d + 2c
d + + 2c
P =2tSew
d 2tYor
2Reprinted from ASME B31.3 2010, by permission of The American Society of Mechanical Engineers.
All rights reserved. No further copies can be made without written permission.
-
7/30/2019 FSFU Union Pipe
7/216
sOCkeT WelD/ThreaDeD fiTTings
Plugs & bushings
COnDenseD DesCriPTiOn
90 ebw1/4" 4" css 2000 dd
1/8" 4" css 3000 dd& scket wed
1/8" 4" css 6000 dd
1/8" 4" css 6000
sc wd
1/2" 2" css 9000sc wd
T1/4" 4" css 2000 dd
1/8" t 4" css 3000 threded &sc wd
1/8" 4" css 6000 dd
1/8" 4" css 6000 sc wd
1/2" 2" css 9000 sc wd
45 ebw1/4" 4" css 2000 dd
1/8" 4" css 3000threded & scket wed
1/8" 4" css 6000 dd
1/8" 4" css 6000sc wd
1/2" 2" css 9000sc wd
lt1/4" 2" css 3000 dd
1/4" 2" css 3000 sc wd
3/8" 1 1/2" css 6000 dd
1/2" 2" css 6000sc wd
1/2" 1 1/2" css 9000sc wd
Stt ebw1/8" 2" css3000 dd
1/4" 1 1/2"css 6000dd
css1/4" t 4" css 2000, 3000 & 6000dd
1/8" 4" css 3000 sc wd
1/8" 4" css 6000 sc wd
1/2" 2" css 9000 sc wd
rund hd Pug1/8" 4" m ppszs
hxgn Pug1/8" 4" m ppszs
Squ hd Pug1/8" 4" m ppszs
hxgn Busing1/8" 4" m ppszs
Fus Busing1/8" 4" m ppszs
avb css 3000, 6000 d 9000 ( pss) sc wd fs;
s, css 2000, 3000 d 6000 dd fs.
Quiklg90TM
3/4" t 2" css 3000 & 6000sc wd
1/2" 1 1/2" css 9000sc wd
1/2" 2" css 3000 dd
1/2" 1 1/2" css 6000 dd
2" 4" StD/xS b wd
-
7/30/2019 FSFU Union Pipe
8/217
COnDenseD DesCriPTiOn
COuPlings, reDuCers & CaPs
reDuCer inserTs
uniOns
Pip cp1/8" 4" css3000
1/8" 2" css6000 threded &
sc wd
hf cuping1/8" 4" css 3000& 6000 threded &sc wd
1/2" 2" css 9000
sc wd y
cuping1/8" 4" css 3000& 6000 threded &sc wd
1/2" 2" css 9000
sc wd y
rdu1/4" 4" css 3000& 6000 threded &sc wd
1/2" 2" css 9000
sc wd y
Typ 1nm pp szsfm 1/4" 1/8" 2" 1 1/2"
Typ 2nm pp szsfm 1/2" 1/4" 2" 1 1/4"
MSS-SP-83accmds 1/8" 3" pp css 3000d 1/8" 2" pp css 6000
rkwdFr use with 1/8" t 2" pipe. 1/8" t 2"dd cc. 1/8" 2" scwd-sss s y.
avb css 3000 d 6000. Spc szs d ws vb qs.
Sc wd dc ss vb css 3000, 6000 d 9000. issscd vs ms. Cs fcy f spc ppcs.
Bey Fre MSS-SP-83 threded d scket wed uis i css 3000 d 6000. UseBey Fre Rckwd Uis fr the utimte i perti d durbiity.
lug Nut3/8" t 4" css 3000 threded &sc wd
-
7/30/2019 FSFU Union Pipe
9/218
Class 3000
Class 6000
sOCkeT WelD fiTTings
ClASS
3000-Schdu
40
Bor
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90el Tee a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16laT B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4
45el a 7/8 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2croSS B 29/32 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6
(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4
e 7/16 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 5/8F 3/4 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8g 5/16 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 5/8
k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16
DiMeNSioNS (ncs)
DiMeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545all fittings)
WeighT (unds)
90 elBoW .125 .183 .270 .460 .698 .987 1.480 2.088 3.125 6.340 10.867 25.0045 elBoW .125 .198 .210 .440 .673 .935 1.365 1.63 2.71 6.75 10.50 18.188
tee .25 .25 .345 .540 .925 1.307 2.00 2.640 4.070 8.75 12.50 27.80
Street elBoW .25 .25 .375 .50 .875 1.438 2.25 3.00 5.188lateral .25 .625 1.00 1.500 2.375 3.75 4.125 6.285
CroSS .25 .25 .375 .813 1.125 1.550 2.25 3.063 5.125 18.00 23.00 40.00
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
(Min.) D 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4
e 7/16 17/32 5/8 3/4 7/8 1 1/16 1 1/4 1 1/2 1 5/8 2 1/4 2 1/2 2 3/4F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
g 5/16 5/16 7/16 1/2 9/16 11/16 13/16 1 1 1/8 1 1/4 1 3/8 1 5/8
k 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
DiMeNSioNS C (common to .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545all fittings)
WeighT (unds)
90 elBoW .938 1.440 2.348 3.188 5.25 6.660 11.875 19.25 32.7045 elBoW .875 1.313 1.913 2.27 4.313 4.813 9.625 14.25 27.25
tee 1.375 2.00 3.313 3.75 7.480 8.240 16.625 23.50 33.00
Street elBoW .375 .438 1.00 1.625 2.50 3.688 6.438lateral 2.00 3.063 5.125 6.25 11.938 12.5
CroSS 1.50 2.50 3.460 5.25 8.75 9.438 20.25 27.00 39.00
DiMeNSioNS (ncs)
ClASS
6000-Schdu
160
Bor
-
7/30/2019 FSFU Union Pipe
10/219
Class 9000
sOCkeT WelD fiTTings
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3
B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16
(Min.) D 3/8 1/2 1/2 1/2 1/2 5/8e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
DiMeNSioNS (ncs)
WeighT (unds)
W 1.44 2.25 3.19 5.25 6.69 6.69
ClASS 9000 XXS Bore- 90 elBoW
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3
B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 3 11/16(Min.) D 3/8 1/2 1/2 1/2 1/2 5/8
e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
WeighT (unds)
W 2.00 3.31 3.75 6.50 7.88 8.75
ClASS 9000 XXS Bore- Tee
DiMeNSioNS (ncs)
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
B 1 27/32 2 7/32 2 1/2 3 1/32 3 3/8 4
(Min.) D 5/8 9/16 9/16 13/16 3/4 15/16
F 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16
g 5/8 3/4 13/16 7/8 1 1 1/8
DiMeNSioNS (ncs)
WeighT (unds)
W 1.31 2.06 2.50 4.31 4.81 9.62
ClASS 9000 XXS Bore- 45 elBoW
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32
(Min.) D 9/16 5/8 11/16 7/8 7/8k 3 3 1/2 3 15/16 4 3/4 5
l 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
WeighT (unds)
W 1.75 2.38 3.75 6.88 6.88
ClASS 9000 XXS Bore- lATerAl
DiMeNSioNS (ncs)
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
a 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4
B 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4
(Min.) D 1/2 5/8 3/4 1 1 1 1/8
e 1 1 1/8 1 1/4 1 3/8 1 1/2 2 1/8
DiMeNSioNS (ncs)
WeighT (unds)
W 2.50 4.12 4.12 5.12 9.44 22.19
ClASS 9000 XXS Bore- CroSS
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
a 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2
B 1 13/16 2 2 3/8 2 3/4 3 1/16 3 5/8(Min.) D 1/2 9/16 5/8 11/16 3/4 7/8
e 3/8 3/8 1/2 1/2 1/2 3/4
F
WeighT (unds)
Coupling .75 1.06 1.69 2.22 2.81 4.66Reducer .75 1.06 1.69 2.22 2.81 4.66
Half Coupling .88 1.16 1.88 2.50 3.25 5.38
ClASS 9000 XXS Bore- CoUpliNgS- reDUCerS- hAlF CoUpliNg
DiMeNSioNS (ncs)
NoMiNAlpipe Size 1/2 3/4 1 1 1/4 1 1/2 2
C .855 1.065 1.330 1.675 1.915 2.406
DiMeNSioNS C - CoMMoN To All FiTTiNgS (ncs)
-
7/30/2019 FSFU Union Pipe
11/2110
Class 2000
Class 3000
ThreaDeD fiTTings
Class 6000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8h 1 1/4 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16
J 7/8 7/8 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2k 1 7/8 2 1/8 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 2 11/16 3 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
WeighT (unds)
90 elBoW .236 .350 .592 .973 1.355 2.265 2.407 3.50 5.920 11.900 14.438 31.97545 elBoW .25 .290 .50 .75 1.188 1.988 2.235 3.00 4.930 7.375 13.558 19.063
tee .325 .460 .753 1.270 1.830 3.025 3.620 7.040 7.550 13.125 23.100 40.000
Street elBoW .264 .242 .375 .595 1.048 1.438 2.340 3.00 5.461lateral .625 1.313 1.75 2.75 4.625 5.50 10.813 11.5
CroSS .438 .567 .970 1.50 2.50 3.620 4.125 6.50 8.125 16.75 25.675 32
DiMeNSioNS (ncs)
ClA
SS
3000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90el Tee a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2STel laT B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8h 1 1/4 1 1/2 1 5/8 1 7/8 2 1/4 2 5/8 2 15/16 3 5/16
45el a 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2 4 1/2croSS B 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6 6
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8 3 1/8
J 1 1 1/8 1 3/8 1 3/4 2 2 1/8 2 1/2k 2 9/16 3 3 1/2 3 15/16 4 3/4 5l 3 9/16 4 1/8 4 13/16 5 3/8 6 7/16 6 5/8
WeighT (unds)
90 elBoW .25 .625 1.023 1.625 2.625 3.50 6.75 7.50 13.438 20.875 39.050 3845 elBoW .25 .640 .50 1.438 2.188 2.785 4.688 5.75 9.50 15 30.563 29
tee .50 .853 1.410 2.150 3.563 4.625 7.625 9.625 18.500 28.063 47.500 50
Street elBoW .375 .438 1 1.625 3.030 3.688 7.120lateral 2.375 3.25 5.438 7.188 12.313 15.95
CroSS .563 1.188 1.50 2.75 4.313 6.625 10.75 11.50 22.188 27.50 54 43.50
DiMeNSioNS (ncs)
ClASS
6000
ClASS
2000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
90el Tee a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16STel laT B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
45el a 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 1/4 3 3/4 4 1/2croSS B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 4 4 3/4 6
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
DiMeNSioNS (ncs)
WeighT (unds)
90 elBoW .25 .198 .283 .500 .773 1.013 1.550 2.180 3.140 6.50 10.925 26.67545 elBoW .125 .188 .236 .435 .740 1.058 1.375 1.740 2.883 7.75 11.313 19.125
tee .25 .267 .373 .613 .963 1.355 2.030 2.800 4.456 9.530 12.908 28.700
CroSS .50 .50 .460 .777 1.125 1.688 2.450 3.188 5.560 16.438 19.50 32.688
-
7/30/2019 FSFU Union Pipe
12/2111
quikleg90 - sOCkeT WelD - ThreaDeD - buTT WelD
Class 3000
Class 6000std-Xstg
ClASS6
000
a nm - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -
B nm - 1 7/8 2 3/16 2 1/2 3 3 1/8 1 7/8 2 3/16 2 1/2 3 3 1/8 -
C nm - 1 1/2 1 3/4 2 2 3/8 2 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2 -
SoCkeT WelD ThreADeDDiMeNSioNS(ncs)
NoMiNAl pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2
ClASS
3000
a nm - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2
B nm - 1 7/8 1 7/8 2 3/16 2 1/2 3 1 7/8 1 7/8 2 3/16 2 1/2 3 3 1/8
C nm - 1 1/2 1 1/2 1 3/4 2 2 3/8 1 1/2 1 1/2 1 3/4 2 2 3/8 2 1/2
SoCkeT WelD ThreADeDDiMeNSioNS(ncs)
NoMiNAl pipe Size 1/2 3/4 1 1 1/4 1 1/2 2 1/2 3/4 1 1 1/4 1 1/2 2
STD-
XSTg
a nm 2 3/8 3 3 3/8 4 3/16
B nm 3 3 3 3/8 4 3/16
C nm 2 3/8 3 3 3/8 4 3/16
DiMeNSioNS(ncs)
NoMiNAl pipe Size 2 2 1/2 3 4
BUTT WelD
Sckt Wl
Thr
Butt Wl
-
7/30/2019 FSFU Union Pipe
13/2112
sOCkeT WelD COuPlings, reDuCers & CaPs
Class 3000
Class 6000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 1 1/16 1 1/16 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3aa 1 1/32 1 1/32 1 1/32 1 3/16 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64B 3/4 7/8 1 1/16 1 1/4 1 1/2 1 13/16 2 1/4 2 1/2 3 3 5/8 4 5/16 5 1/2
C .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545(Min.) D 7/16 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8
e 1/4 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 11/16 3/4 3/4 7/8 1 1 1/16 1 3/16 1 1/4 1 1/2 1 9/16 1 13/16 2 1/16
WeighT (unds)
CouPling .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625reDuCer .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625
HalF CoUPlIng .125 .125 .125 .188 .313 .563 .813 1 2 2.625 3.875 6.625
PiPe CaP .063 .063 .125 .188 .313 .563 .813 1.125 1.688 3 3.625 6.688
DiMeNSioNS (ncs)
ClASS
3000
NoMiNAl pipe Size 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 1 1/8 1 1/8 1 3/8 1 1/2 1 3/4 1 7/8 2 2 1/2 2 1/2 2 3/4 3aa 1 1/8 1 1/8 1 5/32 1 13/32 1 33/64 1 33/64 1 33/64 2 1/64 2 1/64 2 1/64 2 17/64
B 1 1/16 1 5/16 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4
C .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535 4.545(Min.) D 7/16 7/16 1/2 9/16 5/8 11/16 3/4 7/8 7/8 1 1 1/8
e 1/4 1/4 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4F 15/16 15/16 1 1 1/16 1 1/4 1 5/16 1 3/8 1 5/8 1 11/16 1 15/16 2 5/16
WeighT (unds)
CouPling .375 .563 1 1.438 2 3.875 5.50 6.625 13.125reDuCer .375 .563 1 1.438 2 3.875 5.50 6.625 13.125
HalF CoUPlIng .375 .563 1 1.438 2 3.875 5.50 6.625 13.125
PiPe CaP .375 .50 1.125 1.125 2.25 3.50 5.625 6 13.50
DiMeNSioNS (ncs)
ClASS
6000
-
7/30/2019 FSFU Union Pipe
14/2113
ThreaDeD COuPlings, reDuCers & CaPs
Class 3000
Class 6000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 3/4 3/4 7/8 1 1/8 1 3/8 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 1/2
C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 15/16 1 1 1 1/4 1 7/16 1 5/8 1 3/4 1 3/4 1 7/8 2 3/8 2 9/16 2 11/16
WeighT (unds)
CouPling .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75reDuCer .125 .125 .25 .25 .438 .625 1.563 2.188 3.125 4 6.75 16.75
HalF CoUPlIng .063 .063 .188 .188 .25 .313 .75 1.125 1.563 2 3.375 8.375
PiPe CaP .031 .063 .125 .25 .313 .50 1 1.625 3.125 5 8.50 14
DiMeNSioNS (ncs)
ClASS
3000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
a 1 1/4 1 3/8 1 1/2 1 7/8 2 2 3/8 2 5/8 3 1/8 3 3/8 3 5/8 4 1/4 4 3/4B 7/8 1 1 1/4 1 1/2 1 3/4 2 1/4 2 1/2 3 3 5/8 4 1/4 5 6 1/4
C 5/8 11/16 3/4 15/16 1 1 3/16 1 5/16 1 9/16 1 11/16 1 13/16 2 1/8 2 3/8D 1 1 1/16 1 1/16 1 5/16 1 1/2 1 11/16 1 13/16 1 7/8 2 2 1/2 2 11/16 2 15/16
WeighT (unds)
CouPling .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50reDuCer .188 .188 .25 .50 1 2.125 2.375 4.375 7.75 10.75 13.50 24.50
HalF CoUPlIng .094 .094 .125 .25 .50 1.063 1.188 2.188 3.875 5.375 6.75 12.25
PiPe CaP .125 .125 .188 .313 .438 .75 1.313 1.688 3.25
DiMeNSioNS (ncs)
ClASS
6000
-
7/30/2019 FSFU Union Pipe
15/2114
sOCkeT WelD reDuCers inserTs(Mss-sP79)
Class 3000
Class 6000Class 9000
3/8 1/4 .675 .555 1 7/16 3/4 15/16 1 7/16 7/8 1
1/2 3/8 .850 .690 1 7/16 13/16 1 1/16 1 7/16 15/16 1 3/16
1/2 1/4 .850 .555 1 7/16 13/16 15/16 1 7/16 7/8 1
3/4 1/2 1.060 .855 1 7/16 7/8 1 5/16 1 7/16 1 1/16 1 3/8 1 7/16 1 3/16 1 3/4
3/4 3/8 1.060 .690 2 7/16 5/8 - 1 7/16 7/8 1 3/16
3/4 1/4 1.060 .555 2 3/8 11/16 - 2 3/8 7/8 -
1 3/4 1.325 1.065 1 9/16 15/16 1 1/2 1 9/16 1 1/8 1 11/16 1 9/16 1 1/4 2
1 1/2 1.325 .855 2 1/2 5/8 - 1 7/16 1 1/8 1 3/8 1 7/16 1 1/8 1 3/4
1 3/8 1.325 .690 2 7/16 11/16 - 2 1/2 7/8 -
1 1/4 1.325 .555 2 3/8 3/4 - 2 3/8 15/16 -
1 1/4 1 1.670 1.330 1 9/16 1 1 7/8 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8
1 1/4 3/4 1.670 1.065 2 9/16 11/16 - 2 9/16 13/16 - 1 9/16 1 3/16 2
1 1/4 1/2 1.670 .855 2 1/2 3/4 - 2 1/2 7/8 - 2 1/2 7/8 -1 1/4 3/8 1.670 .690 2 7/16 13/16 - 2 7/16 15/16 -
1 1/4 1/4 1.670 .555 2 3/8 7/8 - 2 3/8 1 -
1 1/2 1 1/4 1.910 1.675 1 9/16 1 1/8 2 1/4 1 9/16 1 3/8 2 3/8 1 9/16 1 5/8 2 3/4
1 1/2 1 1.910 1.330 2 5/8 11/16 - 1 9/16 1 3/16 2 1 9/16 1 3/8 2 3/8
1 1/2 3/4 1.910 1.065 2 9/16 3/4 - 2 9/16 1 - 2 9/16 1 -
1 1/2 1/2 1.910 .855 2 1/2 13/16 - 2 1/2 1 1/16 - 2 9/16 1 -
1 1/2 3/8 1.910 .690 2 7/16 7/8 - 2 7/16 1 1/8 -
2 1 1/2 2.385 1.915 1 9/16 1 1/4 2 1/2 1 9/16 1 7/8 2 11/16 1 9/16 2 1/16 3
2 1 1/4 2.385 1.675 2 11/16 13/16 - 2 7/8 15/16 - 1 9/16 2 2 3/4
2 1 2.385 1.330 2 5/8 7/8 - 2 13/16 1 - 2 13/16 1 -
2 3/4 2.385 1.065 2 9/16 15/16 - 2 3/4 1 1/16 - 2 3/4 1 1/16 -
2 1/2 2.385 .855 2 1/2 1 - 2 11/16 1 1/8 - 2 11/16 1 1/8 -
NoMiNAlpipe Size C D Ft. Ty A B e Ft. Ty A B e Ft. Ty A B e
ClASS 3000 ClASS 6000 ClASS 9000
Note: Socket Weld Reducer Inserts comply fully with MSS-SP-79
TYpe 1 TYpe 2
-
7/30/2019 FSFU Union Pipe
16/2115
ThreaDeD Plugs & bushings
* Dimension J for Hex Head Bushing and dimension C for Hex Head Plug are the same.
Class 3000/6000
RuH Plu
HxBush
SqurH Plu
HxPlu
FlushBush
a 1 3/8 1 5/8 1 5/8 1 3/4 1 3/4 2 2 2 2 1/2 2 3/4 2 3/4 3
B 13/32 17/32 11/16 27/32 1 1/16 1 5/16 1 11/16 1 29/32 2 3/8 2 7/8 3 1/2 4 1/2
C * 7/16 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8
D 1/4 1/4 5/16 5/16 3/8 3/8 9/16 5/8 11/16 3/4 13/16 1 1/4
e 7/16 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32
F 9/32 3/8 7/16 9/16 5/8 1 3/16 15/16 1 1/8 1 5/16 1 1/2 1 11/16 2 1/2
g 1/4 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/4
h 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 3/8J 5/8 11/16 7/8 1 1/16 1 7/16 1 13/16 2 2 1/2 3 3 3/4 4 5/8
k 3/16 3/16 3/16 1/4 1/4 3/8 3/8 3/8 1/2 13/16 1 1/4
l 1/2 9/16 11/16 3/4 27/32 7/8 15/16 1 1 1/4 1 9/16 1 21/32
M 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4
n 3/8 7/16 1/2 9/16 5/8 3/4 13/16 13/16 7/8 1 1/16 1 1/8 1 1/4
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
DiMeNSioNS (ncs)
rounD heaD PugS .125 .125 .188 .250 .375 .750 1.125 1.563 3.00 4.75 7.62 12.87
hexagon PlugS .063 .063 .125 .188 .313 .500 1.125 1.375 2.25 3.87 5.87 13.00
SQuare heaD PlugS .016 .031 .063 .125 .188 .313 .563 .875 1.50 2.25 2.87 7.18
hexagon BuShingS .063 .063 .063 .125 .188 .375 .688 1.62 2.37 3.50 8.31
FlUSH BUSHIngS .063 .063 .063 .125 .125 .125 .188 .37 .62 1.00 2.00
WeighT (unds)
-
7/30/2019 FSFU Union Pipe
17/2116
Mss-sP-83 uniOns - ThreaDeD & sOCkeT WelD
Class 3000
Class 6000
* C dimension is across octagon corners or a diameter as applicable.
The 2 1/2" and 3" 3000 and 2" 6000 sizes have octagonal male and
female ends; the other sizes are round.
Thr Sckt Wl
B & C dimenSionS aCRoSSoCTagon CoRneRS
B & C dimenSionS aCRoSSoCTagon CoRneRS
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3
a 1 11/16 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/4 4 7/16
B 1 31/64 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64 6 5/32
C 53/64 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16 4 9/32
D 25/32 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8 2 7/16
(Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8
F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406 2.906 3.535
WeighT per UNioN (unds)
.38 .36 .50 .695 1.175 1.64 2.59 3.41 5.12 8.75 12.625
DiMeNSioNS (ncs)
ClASS
3000
NoMiNAl pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2
a 1 11/16 1 27/32 2 2 5/16 2 7/16 2 7/8 3 3 1/2 4 1/8
B 1 31/64 1 11/16 1 15/16 2 3/8 2 25/32 3 23/64 3 23/32 4 27/64 5 15/64
C 53/64 1 1 3/16 1 15/32 1 25/32 2 7/32 2 35/64 3 1/16 3 9/16
D 25/32 31/32 1 3/32 1 5/32 1 3/8 1 45/64 1 7/8 2 1/16 2 3/8
(Min.) e 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8
F .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406
WeighT per UNioN (unds)
.5 .56 .75 1.25 1.75 3 3.75 6.0 10.5
DiMeNSioNS (ncs)
ClASS
6000
-
7/30/2019 FSFU Union Pipe
18/2117
rOCkWOOD uniOns
TyPe 601
TyPe 602TyPe 602b
TyPe 604
Ball to cone seats for smooth alignment. Can be cracked and rejoined- repeatedly.
Replaceable, interchangeable parts. Carbon Steel, coated to resist corrosion.
Stays sealed, despite shock, vibration,expansion and rough wrenching.
Silicon bronze and stainless steel seatsdouble locked under 120,000 lb. psi.
Conveniently packaged. Suitable for use with Schedule
40/80 pipe.
100% hydro tested.
NoMiNAl pipe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT
DePth SoCket 7/16 7/16 7/16 1/2 1/2 9/16 9/16 9/16 11/16
SoCket DiaMeter .420 .555 .690 .855 1.065 1.330 1.675 1.915 2.406
STYle NUT hx hx hx hx octan octan octan octan octan
WeighT per UNioN (unds)
.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6
DiMeNSioNS (ncs)
TYpe
602B
NoMiNAl pipe Size 1/8 18-NPT 1/4 18-NPT 3/8 18-NPT 1/2 14-NPT 3/4 14-NPT 1 11 1/2-NPT 1 1/4 11 1/2-NPT 1 1/2 11 1/2-NPT 2 11 1/2-NPT
a 1 3/4 1 3/4 2 2 1/4 2 7/16 2 11/16 2 31/32 3 1/8 3 11/16
B 1 1/4 1 1/4 1 7/16 1 21/32 2 2 3/8 2 3/4 3 3 23/32
C 3/4 3/4 7/8 1 3/32 1 25/64 1 5/8 2 2 9/32 2 51/64
D 51/64 51/64 15/16 1 11/64 1 7/16 1 23/32 2 3/32 2 11/32 2 7/8
e .264 .402 .408 .534 .548 .683 .707 .724 .757
F 3/4 3/4 13/16 1 1 1/16 1 3/32 1 19/64 1 21/64 1 15/32
g 1/2 1/2 9/16 11/16 3/4 27/32 7/8 1 1 7/32
h 19/32 19/32 3/4 25/32 29/32 1 1/16 1 5/32 1 7/32 1 7/16
i 21/64 3/8 1/2 5/8 27/32 1 1/16 1 13/32 1 21/32 2 1/16
J 29/32 29/32 1 1/16 1 5/16 1 37/64 1 13/16 2 1/4 2 1/2 3 1/16
k 1/8 1/8 1/8 3/16 7/32 7/32 9/32 9/32 19/64
l 7/8 7/8 15/16 1 1/8 1 3/16 1 5/16 1 7/16 1 1/2 1 25/32
M 1.035 1.035 1.164 1.437 1.693 1.975 2.416 2.649 3.221
STYle NUT hx hx hx hx octan octan octan octan octan
WeighT per UNioN (unds)
.32 .30 .40 .72 1.10 1.5 2.2 2.6 4.6
DiMeNSioNS (ncs)
TYpe
601,
602,
604
* Preferred over bronze to carbon steel seated unions.
-
7/30/2019 FSFU Union Pipe
19/2118
lug nuT uniOns
Class 3000
Lug Nut Unions from Bonney Forge are unionswith modified Stub-Acme threads ideal for
applications requiring rapid assembly and/orbreakdown.
Threaded and socket weld ends. Seating characteristics of AAR unions. Twin lugs in sizes up to 3/4" Class 3000
and 1/2 Class 6000. Tri-lug design in sizes from 1"- 4" Class
3000 and 3/4" - 2" Class 6000.
NoMiNAl pipe Size
3/8
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
DiMeNSioNS (ncs)A
1.950
2.065
2.375
2.580
2.950
3.115
3.575
4.200
4.475
8.50
Class 6000
ClASS
3000
ClASS
6000
A
2.065
2.375
2.580
2.950
3.115
3.5754.200
-
-
-
-
7/30/2019 FSFU Union Pipe
20/21
nte: The mteri i this ct is fr eer ifrmti. Fr specific perfrmce dt d prper mteri seecti, csut yur Bey Frerepresettive. athuh every ttempt hs bee mde t esure tht the ifrmti ctied i this ct is crrect, Bey Fre reserves the riht c dss, ms spcfcs w c.
Pd u.S.aCt F9-2012 (500 5/12)
pATeNTS
goVerNiNg lAW
geNerAl TerMS AND CoNDiTioNS oF SAle oF: BoNNeY Forge (hereAFTer reFerreD To AS BF)
WArrANTY
eXClUSioNS
pUrChASerSreMeDieS
priCeS
ACCepTANCeoF orDerS
reMiTTANCeS
TAXeS
ShorTAgeS &DAMAgeS iNTrANSiT
DelAYS
CANCellATioN &SUSpeNSioN
reTUrN oFMATeriAl
No WAiVer
DieS, ToolSAND pATTerNS
ForCeMAJeUre
pUrChASerSACCepTANCeoF ABoVeCoNDiTioNS
pArTiAl Ship-MeNTS ANDpAYMeNTS
All products are warranted to be free from manufacturing defects for a period of one (1) year from date of shipment, and any found to be defective within thatperiod will be replaced without charge, provided (1) that the product was used as recommended and in accordance with approved installation and operatingpractices, (2) that its failure resulted from a manufacturing defect and not from damage due to corrosive, abrasive, or other wear normally to be expected in theservices involved, (3) that the product was not modified or changed (unless written approval was given by BF), and (4) that written notice of such defect isdeliveredtoBFduringsuchone(1)yearperiod.Nolaborcostsorotherexpenseorliabilityisassumed.TheUniformCommercialCodeshallnotapplytothesale,nor the Michigan statutes adopting the Uniform Commercial Code. This express warranty is in lieu of and excludes all other warranties, guarantees, orrepresentations,expressedorimplied.THEREARENOIMPLIEDWARRANTIESOFMERCHANTABILITYOROFFITNESSFORAPARTICULARPURPOSE.
DonotuseBFproductsinaircraftoraerospaceapplications.Nowarranties,guaranteesorrepresentationsofanykindaremadewithrespecttosuchapplications. Purchaser assumes all risks of any use in such applications and will indemnify and hold harmless BF against and from any claims, costs (includingattorneys fees) and liabilities arising out of such use.
The Purchasers remedies with respect to any product furnished by BF hereunder that is found not to be in conformity with the terms and conditions of thecontract because of breach of contract, breach of express or implied warranty, or negligence shall be limited exclusively to the right of replacement of suchdefective product or, at our option, repayment of our sale price of the product. In no event shall BF be liable for claims (based upon breach of contract,breach of express or implied warranty, or negligence) for any other damages, whether direct, immediate, foreseeable, consequential, or special or for anyexpenses incurred by reason of the use or misuse, sale or fabrication of products which do or do not conform to the terms and conditions of the contract.
Prices, and other terms of sale and payment, are subject to change without notice. Unless a contrary provision appears in this price schedule, quotation ororder acknowledgment, prices may be withdrawn without notice at any time. Stenographic or clerical errors are subject to correction.
AllordersaresubjecttoBFcreditdepartmentapprovalpriortoacceptancebyBF.NoassignmentofthePurchasersrightsmaybemadewithoutthewritten consent of BF.
All accounts are payable in United States funds, free of exchange, collection, or any other charges. If, in the sole discretion of BF, the financial condition of thePurchaser at any time so requires, BF retains the right to require full or partial payment in advance.
BF reserves the right to make partial shipments from time to time, and to render invoices therefore, which shall be due and payable as provided in saidinvoicesandtheparagraphentitledRemittances.IfthePurchaserbecomesoverdueinanysuchpartialpayment,BFshallbeentitledtosuspendworkand/or avail itself of other legal remedies.
Unless otherwise specifically noted, the amount of any sale, use, occupancy, excise tax, or other tax, of any nature, federal, state, or local for which BF islegally liable, either initially or through failure of payment by Purchaser, shall be added or be in addition to the price quoted and Purchaser agrees to pay thesame to BF.
Claims for shortages must be made in writing within ten days after receipt of shipment, but loss of or damage to material in transit is the responsibilityof the carrier.
All promises of shipment are estimated as closely as possible, and we will use our best efforts to ship within the time promised but do not guaranteeto do so, and assume no liability for not doing so. Materials stated to be in stock are subject to prior sale.
The order or contract is subject to cancellation or instructions to suspend or delay work or delivery only upon receipt of written notification and withour consent, and upon agreement to pay BFs adjustment charge. Orders for special products (usually price on application items) may be changedand/orcancelledonlyuponreceiptofwritteninstructionswithanexpressedagreementtomakepaymentformaterialusedandworkalreadyperformed.
Noproductofourmanufacturemaybereturnedwithoutwrittenconsent.Allgoodsreturnedaresubjecttoahandlingchargeplusfreightinboth
directions and charges for any required reconditioning, unless otherwise specified in writing by BF.
Purchaser will indemnify and hold harmless BF against and from any claims, costs (including attorneys fees) and liabilities arising out of any suitalleginginfringementofanypatents,byanyproductsuppliedbyBFunderthecontractandmadeinaccordancewiththedesignand/orspecificationfurnished by the Purchaser to BF.
The contract shall be governed by, construed, and enforced in accordance with the laws of the Commonwealth of Pennsylvania, without regard toconflict of law principles.
The failure of BF to insist, in any one or more instances upon the performance of any of the terms, covenants, or conditions of the contract or toexercise any right thereunder shall not be construed as a waiver or relinquishment of the future performance of any such term, covenant, or conditionor the future exercise of such rights, nor shall it be deemed to be a waiver or relinquishment of any other term, covenant, or condition or the exerciseof any other rights under the contract.
Dies, tools and patterns required to produce the article quoted on shall remain the property of BF. Preparation charges for dies, tools and patternsrepresent only a portion of cost. Payment of such charge does not give you any right, title, or interest in such dies, tools, or other products ofpreparation. We will not be responsible for retention of dies or patterns on which no orders are received for two years or more.
Any delays in or failure of performance of BF shall not constitute default or give rise to any claims or damages if and to the extent that such delay or
failure is caused by occurrences beyond the control of BF, including but not limited to acts of God or the public enemy, expropriation or confiscation offacilities, compliance with any order or request of any governmental authority, acts of war, rebellion or sabotage or damage resulting therefrom,embargoes or other export restrictions, fires, floods, explosions, accidents, breakdowns, riots or strikes or other conceived acts of workmen, whetherdirect or indirect, or any other causes whether or not of the same class or kind as those specifically above named which are not within the control ofBF and which by the exercise of reasonable diligence, BF is unable to prevent or provide against.
The contract shall be subject to the terms and conditions contained or referred to in BFs price schedule, quotation or order acknowledgment and tonootherswhatsoever.Nowaiver,alteration,ormodificationofthetermsandconditionsinthispriceschedule,quotationororderacknowledgmentshall be binding unless in writing and signed by an authorized representative of BF.
-
7/30/2019 FSFU Union Pipe
21/21