Frp Pultrusion Catalog
-
Upload
mani-maran -
Category
Documents
-
view
32 -
download
2
description
Transcript of Frp Pultrusion Catalog
FRP PULTRUDED PROFILESAgni Fiber Boards Pvt. Ltd is manufacturer of FRP Pultruded products for electrical Insulation and Chemical Resistance. And also manufactures top quality thermal Insulation and electrical Insulation products.Our Pultruded profiles ranges for variety of Electrical and Chemical applications such as transformers, chocks, switchgear, onload tapchanger insulation, lightning arresters, Cable tray, telescopic operating and discharge rod. We also Manufactures FRP Fasteners like FRP Threaded Rods, Studs, Hex Bolts, and Nuts using continuous pultrusion Process. Which are non corrosive and non conductive. Specifically useful where metallic fasteners are not permitted like as RF Products, Antenna Housing and other electrical applications.Our Manufacturing plant is equipped with RF dryer which improves quality of our product. We also supply profiles in various resin systems such as epoxy, polyester, vinyl ester etc and with different grade glass roving like ER and ECR Grade for customized applications. We can supply as per your colors requirements.Product List for Epoxy Based Electrical Insulations Applications
FRP Dog Bone FRP FASTENERS
FRP Corner Angle FRP Threaded Rod
FRP Flat FRP Stud
FRP Hat FRP Nut
FRP Rod,ECR GradeFRP Rod FRP Bolt
FRP Tube
FRP Dovetail Spacers
FRP AngleFeatures :
Lasting Performance Light Weight & High Strength Corrosion Resistant Electro Magnetic Transparency Thermal Insulation Low temperature capabilities Electrical insulation Machinability Dimensional Stability, easy to fabricate, Low maintenance
Applications Transformers Chocks Switchgear On load tap changer insulation Telescopic Operating & Discharge Rod Motor Slot Wedges Coil Spacers for induction furnaces Lightening Attesters Cable Tray Joints
FIBER BOARDS PVT. LTD. 990/3/4, GIDC Estate, Makarpura,
Vadodara – 390010. Gujarat. INDIA. Phone: 91-265-2631713 , Cell: 9879105308, Telefax : 91-265-2634531
E-mail : [email protected] / [email protected] : www.agnifiberboards.com/ www.agnipultrusion.com
Temperature Class: Class F(155) Customized manufacturing for Class H Flame retardant Characteristic
Technical Specifications:PULTRUDED PROFILES:
SR. NO. CHARACTERISTIC UNIT SPECIFIED VALUES
A GENERAL REQUIRMEMT 1 MATERIAL - ECR/ER2 GRADE 0 EPOXY/POLYSTER/PHENOLIC3 COLOUR - NATURAL/CustomizedB PHYSICAL PROPERTIES1 SPECIFIC GRAVITY - 1.9 - 2.12 GLASS CONTENT - 80% ± 5 MINIMUM3 DYE PENETRATION - 04 WATER ABSORPTION - 0.1 MAXIMUMC MECHANICAL PROPERTIES1 TENSILE STRENGTH Kg. / Cm2 75002 FLEXUREL STRENGTH Kg. / Cm2 50003 COMPRESSIVE STRENGTH Kg. / Cm2 40004 IMPECT STRENGTH ( IZOD ) Kj. / Mtr.2 400 MIN.5 BARCOL HARDNESS 70 MIN.6 HAMMER TEST - 7 THREAD SHEAR LOAD Kgf. 1000D ELECTRICAL STRENGHT
1DYE ELECTRIC STRENGHT (AXIL) Kv/25mm 50DYE ELECTRIC STRENGHT (RADIAL) KV. / mm 10
2 COMPARATIVE TRACKING INDEX KV. 600 MIN.3 INSULATION RESISTANCE onms 10 11
E THERMAL PROPERTIES1 MARTENS HEAT DISTROTION C0 200 MIN.
FRP FASTNERS:
FRP Dog Bone: FRP Epoxy Pultruded Dog bones are being used as a dovetail spacer in Coil winding assembly in Dry Type transformers.
FRP Corner Angle
FRP Corner Angles Epoxy Pultruded are being use in manufacturing
Dry Type transformers in coil winding assembly
Putruded Flat Section
FRP Epoxy Pultruded Flats are being used as a dovetail spacer in coil
winding assembly in transformer and as well as terminal plate in
Switchgear equipment.
FRP Hat Section
FRP Epoxy Pultruded Hat Sections are being used in coil winding
assembly of transformers
size A : 8 10 12 13 13 14 16 16 19 30
B : 6 8 10 8 10 10 10 12 12 16mm
PART NO. A B C D R1APPROX
WEIGHT Kg / Mtr
CANG-6-6 17.0 9.0 6 6 10 0.208
CANG-6.5-6.5 18.4 10.7 6.5 6.5 10 0.276
CANG-8-8 22.8 12.9 8.0 8.0 12.5 0.388
CANG-13-8 28.7 14.5 13 8 22 0.490
CANG-13-13 28.7 14.2 13 13 22 0.565
FLAT THK
DIM 'A'
WIDTH DIM. 'B' L
15 20 25 30 40 50 60
1
AS PER CUSTORMER REQUIREMENT
2
3
6
8
10
12
16
20
40
FRP Rod
FRP Epoxy Pultruded rods are being used as electrical insulation
material in Off load tap changer / off load tap changer, lighting
arrestors.
FRP Tube
FRP epoxy pultruded tubes are being used for Protections of cables & MS
tie- rod in electrical insustries.
FRP Angle
FRP Angle are being used in producing Cable trays and ladders,
FRP Angle are joint with FRP Angle and Flats with FRP Fasteners
DOVETAIL SPACERS
PART NO. A B C D E FAPPROX
WEIGHT Kg / Mtr
HAT-1424 1424.514.77.69.32.7 0.268
HAT-1824 1824.514.77.69.32.7 0.293
HAT-2424 2424.514.77.69.32.7 0.315
size A : 8 10 12 16 18 18.5 19 24 30 32 33.5 38 40 45 50
PART NO. A B C
ANG-5050-E 50506
PART NO. A BAPPROXWEIGHT Kg / Mtr
TUBE 10X16 1016 0.271
TUBE 17X22 1722 0.345
TUBE 17X23.5 1723.5
TUBE 17X23.51725
TUBE 19X25 1925 0.426
TUBE 21X24 2124
TUBE 22X27 2227 0.430
TUBE 25X32 2532 0.741
TUBE 25X35 2535 1.095
TUBE 32X39 3239 0.680
TUBE 34X39 3439
TUBE 40X45 4045
Fiberglass Sheet Epoxy Grade: A wide range of Laminates made out of fiberglass CSM and woven fabric bonded with Epoxy or Polyester resins are offered for a variety of applications.
thickness range of 0.4 mm - 60 mm
FRP Threaded Rods :
By using FRP Threaded Rod / Nut, FRP flat /strips are being used
or covering copper wire leads which are fixed with FRP threaded
rod / nut.
Stud
FRP Epoxy Pultruded Studs are being use for
electrical insulation in Switchgears, transformers.
Nut
FRP Nuts are being used during assembly of threaded rod stud or bolt
PART NO. A BC
DOV-E 168 9
PART NO. A L
TROD-0006M6
TROD-0008M8 600
TROD-0010M10600
TROD-0012M12600
TROD-0016M16600
TROD-0020M20600
TROD-0024M24600
PART NO. A
STUD-0006 6
STUD-0008 8
STUD-0010 10
STUD-0012 12
STUD-0016 16
STUD-0020 20
STUD-0024 24
Note : L and B as per customer's requiremet.
PART NO.A B C D
NUT-0008 M8 102525
NUT-0010 M10102525
NUT-0012 M12122525
NUT-0016 M16162525
NUT-0020 M20253030
NUT-0024 M24253030