Frost Fighter

download Frost Fighter

of 4

Transcript of Frost Fighter

  • 8/22/2019 Frost Fighter

    1/4

  • 8/22/2019 Frost Fighter

    2/4

    Tent HeatingUnlike a direct red heater,

    the Frost Fighter contains

    a heat exchanger, which

    allows the umes and

    products o combustion to

    be vented away rom the

    area being heated. Indirect

    heat eliminates combustion

    products, which can cause

    dizziness, burning eyes

    and nausea. The unit can

    be kept a sae distance

    away rom party tents by

    connecting ducts to the

    ront cap outlets.

    ConcreteCuringIndirect Fired heat is the

    best way to cure concrete

    and nish drywall there

    is no excess moisture or

    contaminants. Drywall will

    not yellow and concrete

    will set at the proper

    temperature. (A remote

    thermostat allows the

    user to set desired

    temperature levels.)

    TemporaryHeatPeople and equipment

    work in comortable, clean,

    breathable air without umes

    and exhaust contaminants.

    Flexible ducts can be easily

    connected to existing

    ducting work while the

    heater remains outside

    no intererence to valuable

    work space.

    EquipmentPreheatingWith a barrier rom a direct

    fame, expensive equipment

    can be easily thawed

    without damage or the risk

    o re.

    is safetyClean, safe, reliable portable heatwherever you need it - indoors or

  • 8/22/2019 Frost Fighter

    3/4

    Railroad CarDrying Recondition rail cars

    Decrease drying time after cleaning

    railway cars

    Clean air prevents grains and other

    ragile cargo rom contamination

    HazardousConditionsPipelines, Oil Patch, MinesAn indirect red unit can be used in

    applications where the job site has

    potentially dangerous and combustible

    umes and dust. The heat exchanger

    provides a barrier rom an open fame,

    making it saer than other units.

    Indirect red units meet the necessary

    saety and environmental standards.

    Industrial Painting& SandblastingIndirect heaters provide clean,

    dry heat essential requirements

    or accelerated drying and curing

    applications.

    Drying and curing concrete, plaster

    and paint

    Shipyards repair and maintain ships

    Preheat aircraft and equipment

    Tent heating and special events

    Road and freeway construction

    Curing and baking epoxies for tank

    cleaning and industrial painting

    Hoarding and temporary spot heating

    Moisture control

    Meets OSHA Standards. No Open Flame!

    is versatility

  • 8/22/2019 Frost Fighter

    4/4

    is performance

    Oil Fired IndirectModel IDF 200 OIL IDF 350 OIL IDF 500 OIL

    Max Capacity 210,000 BTU 350,000 BTU 500,000 BTU

    Heated Air 2,800 CFM 2,800 CFM 3,100 CFM

    Discharge Temp.* 150F 200F 220F

    Tank Capacity 24 IMP/29 US Gal 35 IMP/40 US Gal 35 IMP/40 US Gal

    Burner Motor 1/7 HP 1/4 HP 1/4 HP

    Fan Motor 1/2 HP 1/4 HP 1 HP

    Shipping DimensionsCrated (LxWxH) 83 X 37.5 X 52.5 83 X 37.5 X 52.5 83 X 37.5 X 52.5

    Shipping weight 405lbs 575lbs 575lbs

    Approved ETL CSA CSA

    Propane/Natural Gas

    Model IDF 200 LP/NG IDF 350 LP/NG IDF 500 LP/NGMax Capacity 210,000 BTU 350,000 BTU 420,000 BTU

    Heated Air*(w/o duct) 2,800 CFM 2,8w00 CFM 3,100 CFM

    Discharge Temp. 150F 200F 210F

    Manifold Pressure LP/NG 1.1w.c. LP/NG 1.8w.c. LP/NG 2.8w.c.

    Burner Motor 1/4HP 1/4HP 1/4HP

    Fan Motor 1/2HP 1/2HP 1HP

    Shipping DimensionsCrated (LxWxH) 83 X 37.5 X 52.5 83 X 37.5 X 52.5 83 X 37.5 X 52.5

    Shipping Weight 405lbs 550lbs 550lbs

    Approved ETL ETL ETL

    *Discharge Temp. (@50F ambient)