Friction Welding.ppt
-
Upload
sachin-a-more -
Category
Documents
-
view
412 -
download
53
description
Transcript of Friction Welding.ppt
![Page 1: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/1.jpg)
Friction Welding
![Page 2: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/2.jpg)
SolidState
Welding
Electrical
Chemical
Mechanical
FrictionPressure &
DeformationFriction
Weld
![Page 3: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/3.jpg)
• Friction welding is a solid state joining process that produces coalescence by the heat developed between two surfaces by mechanically induced surface motion.
Definition of Friction Welding
![Page 4: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/4.jpg)
• Continuous drive
• Inertia
Categories of Friction Welding
![Page 5: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/5.jpg)
• One of the workpieces is attached to a rotating motor drive, the other is fixed in an axial motion system.
• One workpiece is rotated at constant speed by the motor.
• An axial or radial force is applied.
Continuous Drive
Workpieces
Non-rotating viseMotor
Chuck
Spindle Hydraulic cylinder
Brake
Continuous Drive Friction Welding
![Page 6: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/6.jpg)
• The work pieces are brought together under pressure for a predeter-mined time, or until a preset upset is reached.
• Then the drive is disengaged and a break is applied to the rotating work piece.
Continuous Drive
Workpieces
Non-rotating viseMotor
Chuck
Spindle Hydraulic cylinder
Brake
Continuous Drive Friction Welding
![Page 7: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/7.jpg)
Linnert, Welding Metallurgy, AWS, 1994
![Page 8: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/8.jpg)
• Rotational speed
• Heating pressure
• Forging pressure
• Heating time
• Braking time
• Forging time
Continuous Drive
Friction Welding Variables(Continuous Drive)
![Page 9: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/9.jpg)
AWS Welding Handbook
![Page 10: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/10.jpg)
AWS Welding Handbook
![Page 11: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/11.jpg)
AWS Welding Handbook
![Page 12: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/12.jpg)
Equipment
Courtesy AWS handbook
Direct Drive Machine
![Page 13: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/13.jpg)
Inertia Welding
![Page 14: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/14.jpg)
• One of the work pieces is connected to a flywheel; the other is clamped in a non-rotating axial drive
• The flywheel is accelerated to the welding angular velocity.
• The drive is disengaged and the work pieces are brought together.
• Frictional heat is produced at the interface. An axial force is applied to complete welding.
Inertia Drive
Spindle
WorkpiecesNon-rotating chuck
Hydraulic cylinder
FlywheelMotor
Chuck
Inertia Welding Process Description
![Page 15: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/15.jpg)
Inertia Welding
C
ISE
2
WhereE = Energy, ft-lb (J)I = Moment of Inertia, lb-ft2 ( kg-m2)S = Speed, rpmC = 5873 when the moment of inertia is in lb-ft2
C = 182.4 when the moment of inertia is in kg-m2
Eu = Unit Energy, ft-lb/in2 (J/mm2)A = Faying Surface Area
A
EEu
![Page 16: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/16.jpg)
• Moment of inertia of the flywheel.
• Initial flywheel speed.
• Axial pressure.
• Forging pressure.
Inertia Drive
Inertia Welding Variables
![Page 17: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/17.jpg)
Linnert, Welding Metallurgy, AWS, 1994
![Page 18: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/18.jpg)
Equipment
Courtesy AWS handbook
Inertia Welding Machine
![Page 19: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/19.jpg)
Linnert, Welding Metallurgy, AWS, 1994
![Page 20: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/20.jpg)
A Few
Specific Examples
![Page 21: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/21.jpg)
![Page 22: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/22.jpg)
Titanium Engine Valve
Titanium Aluminidesor
Titanium Borides(Brittle at RT)
Titanium Alloy(Ductile)
Inertia Weld
Jette, P , Sommer, A., “Titanium Engine Valve”, US Patent 5,517,956 May 21, 1996
![Page 23: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/23.jpg)
• In both methods, welding heat is developed by frictional heat and plastic deformation.
• Both methods use axial force for upsetting purpose.
• In both methods the axial pressure may be changed (usually raised) at the end of rotation.
Similarities between Continuous Drive and Inertia Drive
![Page 24: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/24.jpg)
Continuous drive • One of the workpieces
directly connected to a rotating motor drive.
• Rotational speed remains constant until the brake is applied.
• Rotational energy of the workpiece dissipates through friction and plastic deformation, producing welding heat.
Inertia drive• One of the workpieces is
connected to the flywheel.• Rotational speed decreases
continuously to zero during the process.
• Kinetic energy of the flywheel dissipates through friction and plastic deformation producing heat.
Differences between Continuous Driveand Inertia Drive
![Page 25: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/25.jpg)
Friction Welding Process Variations
![Page 26: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/26.jpg)
AWS Welding Handbook
![Page 27: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/27.jpg)
• The joint face of at least one of the work piece must have circular symmetry (usually the rotating part).
• Typical joint configurations shown at right.
Rod Tube Rod to tube
Rod to plate Tube to plate Tube to disc
Continuous Drive
Friction Welding Joint Design
![Page 28: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/28.jpg)
AWS Welding Handbook
Orbital Friction Welding
![Page 29: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/29.jpg)
AWS Welding Handbook
Angular Reciprocating Friction Welding
![Page 30: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/30.jpg)
AWS Welding Handbook
Linear Reciprocating Friction Welding
![Page 31: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/31.jpg)
Linear Friction Welded Blisk
Electro mechanical linear friction welding machine for
joining metals
![Page 32: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/32.jpg)
CompressorCombustor
TurbineFan
Linear Friction Weld Repair of Fan Blades
Walker, H, et al, “Method for Linear Friction Welding and Products made by such Method” US Patent 6,106,233 Aug 22, 2000
![Page 33: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/33.jpg)
Friction Welding for Mounting Ti Alloy
Rotor BladesShielding Gas &
Induction Pre-heat
Weld Nub
Linear Friction Weld
Force
Schneefeld, D,et al. “Friction Welding Process for Mounting Blades of a Rotor for a Flow Machine”, US Patent 6,160,237 Dec 12, 2000
![Page 34: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/34.jpg)
East Aurora, NY USA Moog and Thomson Friction Welding have developed the world’s largest linear friction welding
machine. It is capable of welding a surface area of 10,000 mm2 (15 in2), nearly twice as much as previously achieved, and
breaks the record of weld forge load at 100 tons.
![Page 35: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/35.jpg)
Radial Friction Welding
• Used to join collars to shafts and tubes.
• Two tubes are clamped in fixed position. The collar to be joined is placed between the tubes.
• The collar is rotated producing frictional heat.
• Radial forces are applied to compress the collar to complete welding.
F
+
FF F
FF
FF
F
![Page 36: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/36.jpg)
Examples of radial friction welds in Grade 29 titanium alloy pipes
Production RFW machine for 6-12 inch diameter pipes
![Page 37: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/37.jpg)
Radial friction weld of Ti-6Al-4V-0.1Ru
Froes, FH, et al, “Non-Aerospace Applications of Titanium” Feb 1998, TMS
Properties in Weld Better than Base
Metal
![Page 38: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/38.jpg)
AWS Welding Handbook
Friction Surfacing
Friction surfacing of a cylindrical part
![Page 39: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/39.jpg)
![Page 40: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/40.jpg)
10 mm diameter mild steel consumable rods with 30 mm length. Mild steel Plates 10 mm thick were used as substrates.
Microstructural transformations during friction surfacing. (a) Consumable base material, (b) heat affected zone, (c) thermo-mechanically affected zone, (d) full recrystallized
microstructure, (e) coating microstructure and (f) heat affected substrate. Process parameters: F = 5 kN; Ω = 2500 rpm; v = 7.5 mm/s.
![Page 41: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/41.jpg)
• Frequently competes with flash or upset welding when one of the work pieces to be joined has axial symmetry.
• Used in automotive industry to manufacture gears, engine valves, and shock absorbers.
• Used to join jet engine compressor parts.
Continuous Drive
Friction Welding Applications
![Page 42: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/42.jpg)
Friction Welded Automotive Halfshaft Friction Welded Joint
Applications
Courtesy AWS handbook
Friction Welded Joints
![Page 43: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/43.jpg)
Cross Section of Aluminum Automotive Airbag Inflator. Three Welds Are Made Simultaneously
Camshaft Forging Friction Welded To Timing Gear.
Applications
Courtesy AWS handbook
Friction Welded Joints
![Page 44: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/44.jpg)
Inertia Welded Hand Tools
A Jet Engine Compressor Wheel Fabricated by Friction Welding
Applications
Courtesy AWS handbook
Friction Welds
![Page 45: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/45.jpg)
Aluminum to Steel Friction Weld
Dissimilar Metals – Friction Welded
![Page 46: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/46.jpg)
AWS Welding Handbook
![Page 47: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/47.jpg)
Photomicrograph of Aluminum (top) to Steel (bottom)
AWS Welding Handbook
![Page 48: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/48.jpg)
AWS Welding Handbook
Friction Weld Tantalum to Stainless SteelNote: mechanical mixing
![Page 49: Friction Welding.ppt](https://reader033.fdocuments.us/reader033/viewer/2022061314/55cf9b47550346d033a569dc/html5/thumbnails/49.jpg)
Continuous Drive Friction Weld of Titanium Pipe
Ti-6Al-4V-0.5Pd246 mm diameter
14mm wall thickness
No shielding used
Center HAZ Froes, FH, et al, “Non-Aerospace Applications of Titanium” Feb 1998, TMS