Customise your site with an ALLIX® cantilever gate. It offers a wide selection of panel infill options to match a variety of fencing systems and features a built-in gear rack and wireless communication system for maximum security.

Easy installation

3Ease of use

Protection

3

Design

3

Administrations & local authorities

Businesses

Housing complexes

Industrial & logistics hubs

Gear rack welded into the beam

Built-in lock (manual version)

Radio transmission

Choices→ 5 panel infill options as standard: square bars, wire mesh (AXIS), railings (XYLIO or EXALT), sheet metal.→ Opening: 3 to 10m (at 50cm intervals).→ Height: 1 to 2.5m (at 10cm intervals).→ Operation: manual, motor-ready or motor-driven (hold to run or automatic operation).

Attractive design→ Coordinated fencing and panel infills enhance your site and give a custom look.→ Sleek design with concealed wiring and built-in components.→ 200 RAL colours and 10 coatings from the Elegance Collection.→ Two-colour option: different colours for leaf and posts.

Security→ For the site to prevent vandalism: protected wires (cannot be cut).→ For individuals:• Gear rack built into the beam is non-accessible.• Motor-driven version is fully equipped with all security accessories: presence detector, sensitive edges, flashing light and area lighting.• Complies with standard NF EN 13241-1.

Convenience→ No ground rail: opening is completely clear, no shocks to vehicles.→ Security accessories use radio technology for wireless communication: no trench in the opening area.• Installation without damaging road surface.• Site remains accessible during installation work.→ Transmission components are built in, protecting them from adverse weather (snow and ice).

Easy installation→ Versatility: reversible gate can open from either side.→ Limited adjustments: gear rack built into the beam.→ Motor-driven version: pre-wiring carried out in factory.

Durable→ Steel gear rack built into the beam keeps leaf distortion and wear to a minimum.→ Signs of wear and risks of corrosion are limited.→ Anti-corrosion surface coating with 10-year guarantee.→ Optional "Protect +" coating.→ 2-year guarantee on drive motor.

WELL PROTECTED, ALL AROUND

ALLIX® CANTILEVER GATEINDUSTRIAL GATE

MADE INFRANCE

OVERALL FEATURES COLOURS

TECHNICAL DATA

→ Finish: Zinc epoxy + polyester coating.

→ Optional: "Protect +" coating available in all colours for the most corrosive areas.

Reference Components

1

2

3

4

5

6

Profile frame 80x60mm

Choice of panel infill: square bars, XYLIO, AXIS wire mesh, EXALT, sheet metal

Beam section varies depending on opening

Guide post section varies depending on opening

Single receiving post 100x100mm

LOCINOX lock with "Twistfinger" and European cylinder (manual version)

→ 7 standard colours: Blue 5002, Green 6005, Grey 7016, Grey 7035, Brown 8019, White 9010, Black 9005.

→ 10 regular colours:Beige 1015, Yellow 1023, Red 3002, Red 3004, Blue 5010, Blue 5015, Green 6009, Grey 7030, Brown 8014, Grey 9006/9600.

→ 200 RAL colours and 10 sanded coatings from the Elegance® Collection.

→ Two-colour option available with the 7 standard colours.

110x90mm beam (model A) for openings of 3 to 6m.

150x120mm beam (model B) for openings of 6.5 to 8m.

220x160mm beam (model C) for openings of 8.5 to 10m.

80x60 80x60 80x60

Sections (mm)

120x120

120x120

150x150

Guide post

Receiving post

For all heights of 1 to 2.5m

Leaf length, manual or motor-driven operation (m) 11.57

90x110 (model A) 120x150 (model B) 220x160 (model C)

12.37 13.22 14.07

8.52 9.02 9.52 10.02

8.50 9.00 9.50 10.00

Beam section (mm)

Nominal opening (in m) 3.00

4.22

1.001.101.201.301.401.501.601.701.801.902.002.102.202.302.402.50

3.02

4.87

3.52

5.57

4.02

6.27

4.52

7.07

5.02

7.92

5.52

8.35

6.02

8.87

6.52

9.67

7.02

10.42

7.52

10.87

8.02

3.50 4.00 4.50 5.00 5.50 6.00 6.50 7.00 7.50 8.00

Frame (mm)

Nominal height (m)

Actual opening, manual or motor-driven operation (m)

100x100

100x100

ALLIX® CANTILEVER GATE INDUSTRIAL GATE

PANEL INFILL

Square bars→ Features:

• 25x25mm square bars.

XYLIO® railings→ Features:

• 25mm diameter non-overstanding round bars.

AXIS® wire mesh→ Features:

• 55x200mm wire mesh.

EXALT® Railings→ Features:

• 20mm diameter overstanding round bars.

Sheet metal→ Features:

• Openings up to 7.5m.• Heights up to 2.5m.

Opening: 8m - Height: 2.5m - Motor-driven operation

Opening: 6m - Height: 2m - Motor-driven operation

Opening: 4m - Height: 1.5m - Motor-driven operation - Two-colour option

Opening: 6m - Height: 2m - Motor-driven operation

Opening: 5m - Height: 1.8m - Motor-driven operation

ALLIX® CANTILEVER GATE INDUSTRIAL GATE

DRIVE MOTOR

OPTIONS

SERVICE PLUS

→ Travel speed: 15m per minute.*→ Designed for use:• Up to 70%. • Up to 40 cycles per hour for 6m openings (1 cycle = 1 opening + 1 closing).→ Slows at the start and end of the cycle (smooth operation without jolts).→ Not affected by adverse weather.→ 24 VDC backup battery ensures continued operation in the event of a supply failure.→ Lifetime lubrication.→ Includes set of cells for lightweight vehicles.→ 2-year guarantee .

* 12m per minute for 8 to 10m openings

→ Increased post section (guide post or receiving post).→ Increased beam section.→ Motor-ready version: gear rack inside or outside the beam.→ Technical cabinet.→ Toothed rail.→ Fence fixing element.→ Extra set of cells for HGV traffic (on studs or posts).→ Magnetic loop.→ Wide range of control devices.

→ Manuals and identification numbers included with each gate.→ Configuration tool for civil engineering plans available for download on www.dirickx.fr→ Commissioning and maintenance contract.

DIR

ICK

X re

serv

es t

he r

ight

to

chan

ge it

s ph

otos

at

any

tim

e to

mak

e th

e ne

cess

ary

impr

ovem

ents

. C

olou

rs a

nd p

hoto

s ar

e no

n co

ntra

ctua

l - J

une

20

15

- G

A3

05

10

0 P

asse

relle

.com

WELL PROTECTED, ALL AROUND

DIRICKX INDUSTRIES - 53800 CONGRIER - FRANCETel.: +33 (0)2 43 09 38 38 - Fax: +33 (0)2 43 09 38 99www.dirickx.fr

Remote controlFence fixing elementTechnical cabinet Toothed rail Push button entry system/badge reader

Intercom

For repair or maintenance work, please call the number provided below:

Monday-Friday, 8:30am to 6:00pm, customers have access to experts able to carry out an accurate diagnosis for a quality service.

ALLIX® CANTILEVER GATE INDUSTRIAL GATE