100

Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems

Alu-Framax Xlife framed formwork is a complete system that

includes high-performing safety and workplace accessories.

Its lightweight panels can also be set up by hand, and fi t into

the logical grid of the Framax Xlife system.

Detached home in Weyregg, AustriaContractors: Redl

Framed formwork Alu-Framax XlifeThe crane-independent variant of Framax Xlife

101

Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife

Framed form

work Alu-Framax Xlife

Form economically with no need for a crane

With its low weight, Alu-Framax Xlife brings all the benefi ts of Framax Xlife framed formwork to craneless jobsites as well – also seamlessly combined with Framax Xlife, of course.

Extra light and super-strongwith torsion-proof hollow aluminium profi les

Framed formwork Alu-Framax Xlife

delivers fl at, plane concrete faces thanks to its sturdy aluminium frames•

can be repositioned quickly, with or without crane assistance•

Reduced close-out coststhanks to superior product quality

Extremely long service life is ensured by

the plastic-coated Xlife sheet•

the rugged, powder-coated aluminium frame•

Easy handling and planningthanks to the logical system-grid

The 15 cm grid, with only 5 diJ erent widths of panel, results in

optimum adaptability to every layout•

easy planning and logistics•

a neat joint pattern•

Alu-Framax Xlife and Framax Xlife are fully compatibleAll accessories fi t both systems

Optimise your site

by dividing it up into man-handled and crane-handled zones•

with simplifi ed site logistics•

High safetyfor your site

The accident risk is reduced, and legally compliant working conditions are ensured, by

the safe ladderways of the Ladder system XS•

combining the formwork with the Platform system Xsafe•

15 cm grid

Permissible fresh-concrete pressure 60 kN/m²

Xlife sheet

Lightweight aluminium

102

Framed formwork Alu-Framax Xlife | Framed formwork | Doka Wall Systems

System

Alu-Framax Xlife

Ingeniously co-ordinated panel formats for maximising • utilisation of the formwork

15 cm grid, with only fi ve widths and two heights, simplifi es • planning, forming and logistics on the site

The high-grade powder-coating on the Alu-Framax Xlife • panels reliably prevents concrete adhesion

Integrated waling system: the connection profi les make it • easy to attach accessories – with no obligatory fi xing points

Framax Xlife sheet

Extremely high numbers of re-use cycles with superla-• tive concreting results, for unparalleled cost eV ciency and fewer changes of form-facing

No burst-oJ plywood chips, and less water absorbed • through nail-holes, for longer service life

Special surface structure for less touching-up and reduced • close-out costs

Timber-plastic composite sheet that can also be cleaned • using a high-pressure washer

Alu-Framax palletsThe practical Alu-Framax pallets make light work of oL oading

the panels at the site.

30 45 60 75 90270

90

103

Doka Wall Systems | Framed formwork | Framed formwork Alu-Framax Xlife

Framed form

work Alu-Framax Xlife

Framax circular forming plateBy combining Framax circular

forming plates and Alu-Framax

Xlife panels, it is possible to

form polygonal curves.

Combining with Framax XlifeCombining Framax Xlife with Alu-Framax Xlife makes it possible

to divide up the site into crane-handled and man-handled zones,

making for more fl exible logistics and a faster workfl ow on the site.

Universal panelThe Alu-Framax Xlife system also has a universal panel: with a

width of 75cm, this is ideal for columns, stop-ends and corners.