FOSDEP Waste Water Lifting Units · 2 x FLOAT SWITCH ( WITH 10M CABLE ) 2X45 USD FOSDEP 250 TANK...
Transcript of FOSDEP Waste Water Lifting Units · 2 x FLOAT SWITCH ( WITH 10M CABLE ) 2X45 USD FOSDEP 250 TANK...
FOSDEP Waste Water Lifting Units
2 3 www.etna.com.tr
Professional Solutions
With the development of industry and the gradual
increase of the population, the increasing solid
substance content in waste water makes it difficult
to remove residential and industrial waste water.
Waste water lifting, which have become obligatory
to protect our natural resources, is a challenging
process requiring professionalism, continuity
and high performance. ETNA solutions fulfill
this challenge by offering reliable services to its
customers.
FOSDEP Waste Water Lifting Units
FOSDEP Waste Water Lifting Units, which
are equipped with EFP series high-performance
pumps that have designed for the transfer of waste
and sewage water with solid particle content, are
used both indoors and outdoors with their strong
design ensuring easy maintenance and zero
odor in residential and commercial applications.
ETNA is always by your side to overcome the
difficulties in modern waste water applications in
a safe manner with its drainage and waste water
solutions that are economical, efficient, easy to use,
frequent maintenance-free, safe and long-lasting.
FOSDEP Waste Water Lifting Units
Experience
With our R&D, production, and installation
experience of more than 35 years in the pump
technologies field, we protect you and your
investments without compromising from quality
with our expert sales and after-sales services.
We offer complete solutions for building
mechanics with our wide product range including
in-line dry rotor circulating pumps, endsuction
norm pumps, horizontal-vertical multistage
centrifugal pumps, waste water drainage pumps,
booster systems for residential and commercial
buildings, fire pumps, and fire booster systems in
line with EN 12845 and NFPA 20 norms under the
brand of ETNA.
Green Engineering
By blending advanced pump specifications
with innovative technologies, we offer high-
quality, high-performance, energy-efficient,
environment-friendly, and low-cost products to
the sector and end-users.
ETNA, which set off with the vision of offering
sustainable products, is preferred in prestigious
projects of both Turkey and the world, and is
used reliably.
4 5 www.etna.com.tr
FOSDEP Waste Water Lifting Units
These are stainless steel waste water lifting units that areproduced in line with EN 12050-1 and EN 12050-2 to dischargeclean water, rain water, gray water or waste water when there isno gravity in action or to a higher sewage network.
Depending on the wastewater flow, single and double pump application is available. Pumps are not included in the price and shall be ordered according to system requirements.
Fields of Use
Suitable for residential and commercial use.
Design Properties
• EFPP 30 grinder type sewage pumps and EFP 30D drainage
pumps with open impeller are optional if requested.
• 250L and 500L AISI 304 stainless steel sheet tank
• High-density polyethylene screw-top
• Waste water inlets with leak-proof gaskets DN 65 and DN 110
• PVC discharge with G2" gasket type union
• G2" manual outlet pump connection (for emergencies)
• 2 units of PG13 cable input grommets (for power cable and
floater)
• Sliding rail system enabling easy assembly and maintenance
of the pump, pump connector DN50 flange and o-ring
• Pump immersion and pulling ring and chain
Accessories
• Ball Check Valve
• Electrical Panel
Double Pump FOSDEP Technical Specifications
• Capacity: 500 LT
• Pump: 2 unit (sold separately)
• Waste Water Inlet : 2 x DN 65
2 x DN 110
• Outlet: 2 x G2" PVC gasket type union
• 1 x R2" Manual hand pump outlet
• 2 x Sliding rail for easy assembly and
maintenance
• 2 x HD Polyethylene cover
• Ball-Type Check Valve
• Weight: 72.5 kg
Single Pump FOSDEP Technical Specifications
• Capacity: 250 LT
• Pump: 1 unit (sold separately)
• Waste Water Inlet : 1 x DN 65
1 x DN 110
• Outlet: 1 x G2" PVC gasket type union
• 1 x R2" Manual hand pump outlet
• 1 x Sliding rail for easy assembly and
maintenance
• 1 x HD Polyethylene cover
• Ball-Type Check Valve
• Weight: 36.3 kg
6 7 www.etna.com.tr
183 195
665
700
HINGE
CONCRETE
565
620
CO
NC
RET
E W
ELL
TOP
585CONCRETE WELL TOP
565
600
41550100
700
565665
50
150 415
700 665
COVER2mm DKP665*700
L50*50BRACKET 585
620
WELL TOP585x620
SLIDING RAIL TOP BRACKET
**
DUBEL HOLE
575
CONCRETE SURFACE
DUBEL
113 100
CONCRETE WELL
195
EARTH
150565
BALLCHECK VALVE L50*50
BRACKET
415
665
SLIDING RAILTOP BRACKET
SLIDING RAIL FIXED BRACKET
585
**
VALVE
UNION
L50*50STEEL FRAME
EARTH
600415
565
665700
**
CONCRETE WELL
CONCRETE COVERAND CHASSIS
NOTE: Concrete well can be in the desired size.However, the well top should be 620x585 so thatthe sliding rail well cover supplied by our firm can be mounted. Cover chassis is fitted into well top, and doweled from inside.
** Alternative connection
Sample Concrete CesspoolCesspool cover for sliding rail system and assembly detail
Building FOSDEP Application Illustration
Dimensions
1
2
3
4
56
1 Lifting unit
2 Valve
3 Outlet pipes with non-return
4 Lifting pipe
5 Vent
6 Emergency drain system with
hand-operated pump
900
1200600
900
600600
8 9 www.etna.com.tr
The initial operation should be performed by the authorized service, so that the product is covered by warranty.
EFP Series Sewage & Drainage Pumps FOSDEP 250 Wastewater Lifting Unit For Single Pump
FOSDEP 250 Wastewater Lifting Unit For Two Pump
Control Unit and Float Switch
• EFP 30: Pumps that have been designed for the transfer of waste and sewage water with solid particle content (paper, textile parts, plastic additive waste, etc.) and smoothly drain solid particles by grinding them with their grinder blade system.
• EFP 30D: Pumps with open impeller and stainless steel filter that are ideal for discharging slightly polluted water containing particles up to 6mm.
AREAS OF USE• Residences• Commercial Buildings• Industrial Facilities
Pump Specifications
Body GG25 Cast
Fan GGG40 Cast
Shaft AISI 420 Stainless Steel
Grinder Blade AISI 420 Stainless Steel
Note: Original protection - control panels should be used with the drainage pumps. The damages that may arise when original panels are not used are not covered by warranty.
Specifications
Maximum Flow Rate-Pressure 3-66 m3/h & 25-6.4 mSS
Maximum Liquid Temperature 0-40 °C
Maximum Immersion Depth
20 m
Number of Cycles 2900 rpm
0 Q (m3/h) 10 15 20 5 0
25
EFP-30EFP-30D
20
15
5
10Hm
30
STOCKCODE MODEL VOLTAGE
VPOWER
kW
PORT DIAME-
TER
l/min 0 50 100 150 200 250 300
m3/h 0 3 6 9 12 15 18
081 0000 000 EFP 30 380 2.4 2''Hm
(mSS)
26 25 24.5 22 18 13 6
081 3000 000 EFP 30D 380 2.4 2'' 26 25 24.5 22 18 13 6
FOSDEP 250 TANK WITH 250 LT. CAPACITY
Each tank includes sliding rail and non-return valve for
single pump511 USD
EFP 30 GRINDER PUMP
Additional Equipment
576 USD
EVO1 PUMP CONTROL UNIT 218 USD
FLOAT SWITCH ( WITH 10M CABLE ) 45 USD
FOSDEP TANK 500 WITH 500 LT. CAPACITY
Each tank includes two sliding rails and two non-return valves for pumps
804 USD
2 x EFP 30 GRINDER PUMP
Additional Equipment
2x 576 USD
1 x EVO2 PUMP CONTROL UNIT 1 X 264 USD
2 x FLOAT SWITCH( WITH 10M CABLE ) 2X45 USD
FOSDEP 250 TANK WITH 250 LT. CAPACITY
Each tank includes sliding rail and non-return valve for
single pump511 USD
EFP 30D OPEN IMPELLER PUMP
Additional Equipment
570 USD
EVO1 PUMP CONTROL UNIT 218 USD
FLOAT SWITCH ( WITH 10M CABLE ) 45 USD
FOSDEP TANK 500 WITH 500 LT. CAPACITY
Each tank includes two sliding rails and two non-return valves for pumps
804 USD
2 x EFP 30D OPEN IMPELLER PUMP
Additional Equipment
2x 570 USD
1 x EVO2 PUMP CONTROL UNIT 1 X 264 USD
2 x FLOAT SWITCH( WITH 10M CABLE ) 2X45 USD
Pres
sure
(m
SS)
Flow (m3/h)
After-Sales Services
With our more than 35 years of sector experience, 97 service points all
around Turkey, and customer-oriented after-sales approach to service, we
are with you (commissioning, maintenance and repair, spare part supply).
Dudullu Organize Sanayi Bölgesi 2. Cadde No: 14 34775 Ümraniye İstanbul / TurkeyTel : +90 216 561 47 74 (Pbx) • Fax : +90 216 561 47 50www.etna.com.tr/en • [email protected] customer service