Form B: Price Schedule Form - iraq-businessnews.com€¦ · Web viewPayment terms 30 days...
Transcript of Form B: Price Schedule Form - iraq-businessnews.com€¦ · Web viewPayment terms 30 days...
UNOPS eSourcing v2017.1
Section III: Returnable Bidding FormseSourcing reference: RFQ/2020/14947
Note to Bidders: The following returnable forms are part of this RFQ and must be completed and returned by bidders as part of their quotation. Instructions to complete each Form are highlighted in blue in each Form. Please complete the Returnable Biding Forms as instructed and return them as part of your quotation by uploading them against their specific Document Checklist in the UNOPS eSourcing system.
Form A: Quotation submission formBidders are requested to complete this form, sign it and return it as part of their bid submission. The bidder shall fill in this form in accordance with the instructions indicated. No alterations to its format shall be permitted and no substitutions shall be accepted.
Date: [Insert submission date]
Subject: Quotation for the supply of [Insert a brief description of goods/services] in [Name of country/city], RFQ Case No. [Insert RFQ ref number], dated [insert date]
We, the undersigned, declare that:
a. We offer to supply in conformity with the bidding documents, including the UNOPS General Conditions of Contract;
b. Our quotation shall be valid for the period of time of [insert number of days which shall not be less than the specified in the Tender Particulars section, Period of Validity of Quotations] from the date fixed for the submission deadline as set out in the RFQ, and it shall remain binding upon us and may be accepted at any time before the expiration of that period;
c. We have no conflict of interest in any activity that would put it, if selected for this assignment, in a conflict of interest with UNOPS [If you have any actual or potential conflict of interest as defined in Article 3 of Section I: Instructions to Bidders, please disclose it here];;
d. Our firm confirms that the offeror and sub-contractors have not been associated, or had been involved in any way, directly or indirectly, with the preparation of the design, terms of references and/or other documents used as a part of this solicitation;
e. Our firm, its affiliates or subsidiaries—including any subcontractors or suppliers for any part of the Contract—has not been declared ineligible by UNOPS, nor is included in the suspended/ineligibility list of the UN/PD, other UN Agencies, the UN Security Council, and the World Bank, in accordance with Instructions to Bidders Article 3, Eligibility;
f. We embrace the UN Supplier Code of Conduct and adhere to the principles of the UN Global Compact;
g. We have not declared bankruptcy, are not involved in bankruptcy or receivership proceedings, and there is no judgment or pending legal action against them that could impair their operations in the foreseeable future;
h. We have not offered and will not offer fees, gifts and/or favours of kind in exchange for this RFQ and will not engage in any such activity during the performance of any Contract awarded.
I, the undersigned, certify that I am duly authorized by [insert full name of bidder] to sign this quotation and bind [insert full name of bidder] should UNOPS accept this quotation:
Name: [complete]Title: [complete]Date: [complete] Signature: _____________________________________________________________
Provide the name and contact information for the primary contact from your company for this quotation:
Name: [complete]
1
UNOPS eSourcing v2017.1
Title: [complete]Email address: [complete]Telephone: [complete]
2
UNOPS eSourcing v2017.1
Form B: Price Schedule FormBidders shall fill in this Price Schedule Form in accordance with the instructions indicated. RFQ reference no: [insert RFQ reference No.]
Currency USD
IN THE BELOW SHEETS ALL MEDICAL EQUIPMENT SHOULD INCLUDE EITHER TWO YEARS FREE MAINTENANCE (LABOR AND SPARE PARTS) AND MANUFACTURER’S WARRANTY, OR REQUIRED TO HAVE ONLY ONE YEAR MANUFACTURER’S WARRANTY BASED ON CODES OF A & B AS FOLLOWINGS;
Code A : Medical equipment will include two years free maintenance (labour and spare parts) including one year warranty (Manufacturer’s Warranty)
Code B : Medical equipment that not included in the two years free maintenance (labor and spare parts) but include one year manufacturer’s warranty:
LOT 1 - LAB
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP]
Total price [DAP]
LAB-002 Microcentrifuge A 11LAB-003 Centrifuge A 16LAB-004 Water Purification System A 4
LAB-005Photometric Microplate Reader/Washer (ELISA)
A 2
LAB-006 Portable Glucose Analyzer B 2LAB-007 Immunoassay Analyzer, Automated A 1LAB-009 Laboratory Incubator A 1LAB-010 Light Microscope A 10LAB-012 Spectrophotometer A 7
LAB-013Laboratory (Autoclave) Steam Sterilizer (30 L)
A 12
LAB-014 Laboratory Water Bath A 6LAB-015 Laboratory Oven 50 L A 11LAB-016 Chloride Meter A 11LAB-017 Dry Chemistry Analyzer (Strip) A 13LAB-019 Hemoglobin Meter A 7LAB-026 Bilirubinometer A 7
Total Price
LOT 2 – DENTAL
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP] Total price [DAP]
DEN-001 Dental Unit A 5 insert insertDEN-002 Digital Dental Radiography A 3DEN-005 Dental Ultrasonic Scaler A 2DEN-006 Dental Unit Autoclave A 2DEN-007 Light Cure A 1
Total Price
3
UNOPS eSourcing v2017.1
LOT 3 – IMAGERY
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP] Total price [DAP]
IMG-005 Mobile X-Ray Unit Digital A 5IMG-009 Portable Ultrasound A 3
Total Price
LOT 4 – MEDICAL Equipment
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP]
Total price [DAP]
MED-004 Otoscope B 5MED-007 Fetal Heart Detector, Ultrasonic A 8MED-009 General Surgical Operating Table A 2MED-010 Infant Incubator A 11MED-011 Infant Scale B 6MED-013 Infusion Pump A 2MED-015 Mobile Surgical Light A 4MED-017 Phototherapy, Free Stand A 8MED-018 Sphygmomanometer B 49MED-021 Stethoscope B 44MED-022 Surgical Suction Unit A 14MED-025 Ophthalmoscope B 4MED-027 Digital Scale B 11MED-029 Oxygen Cylinder B 5MED-032 Surgical Curettage Set B 3MED-034 Lead Barrier 3mm Lead 1x2 M B 9
Total Price
LOT 5 – Medical Furniture
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP]
Total price [DAP]
MFUR-003 Bedside Cabinet B 5MFUR-006 Examination Couch With Steps B 23MFUR-007 Drug Trolley B 4MFUR-008 Stainless Steel Paravane B 22MFUR-010 Delivery Bed A 2MFUR-011 Phlebotomy Chair B 4MFUR-012 IV Pole B 11MFUR-013 Wheelchair B 5MFUR-014 Stretcher Stainless Steel B 4MFUR-015 Dressing Trolley B 28Total Price
LOT 6 – MONITORING
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP]
Total price [DAP]
MON-001 ECG A 21
4
UNOPS eSourcing v2017.1
MON-005 Defibrillator-Monitor, With AED A 4Total Price
LOT 7 – VENT Equ.
Item No DescriptionWarranty &
maintenance Code
Qty. Unit price [DAP]
Total price [DAP]
VNT-001 Anesthesia Machine B 3 insert insertVNT-002 Continuous Positive Airway Pressure
(CPAP), NeonatalA
5
VNT-003 Nebulizer A 20VNT-006 O2 Regulator, Low Pressure B 10
Total Price
Payment terms 30 days accepted: ☐ Yes
Bidder’s discount for accelerated payment: ____% of total firm price for each calendar day less than thirty (30) days
List of subcontractors or suppliers
Bidder must identify the names of all subcontractors/suppliers who will be providing good/services under this Contract and the type of work being subcontracted, if applicable.
(A) _[Full legal name and address of subcontractors ] ___________
(B) _________________________________________________
(C) _________________________________________________
I, the undersigned, certify that I am duly authorized by [insert full name of Bidder] to sign this quotation and bind [insert full name of Bidder] should UNOPS accept this quotation:
Name : _____________________________________________________________
Title : _____________________________________________________________
Date : _____________________________________________________________
Signature : _____________________________________________________________
5
UNOPS eSourcing v2017.1
Form C: Technical Quotation Form
RFQ reference no: [insert RFQ reference No.]Name of Bidder: [insert name of Bidder]
Bidders are required to complete the Comparative Data Tables included in Section II: Schedule of Requirements to demonstrate compliance with UNOPS requirements and inserted below. Bidders are NOT allowed to make any change in the “UNOPS requirements” columns of the Comparative Data Tables. Such changes might disqualify your quotation.
Technical specifications for goods – Comparative Data Table
LOT 1 - LAB
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1
Micro centrifuge: Purpose: to separate suspended particles from a liquid or to separate liquids of different densities
Heavy duty and compatible design
11
☐ Yes ☐ No
Insert details of goods offered, including specifications and brand/model offered if applicable
ROTATIONAL SPEED
To reach a maximum of 13000 rpm or more ,With the ability to choose less rotational speed , for DNA-RNA Extraction the minimum working rpm needed is up to 13000 rpm.
Number of tubes (type) 24 * ( 1.5 - 2) ml
ROTORS Vertical
TIMER : Range, min 0 to ≥60 with increment ≤ 1min
BRAKING TIME, sec variable time (speed)
BRUSHLESS Yes
NOISE LEVEL, dB <70
LID INTERLOCK Yes
ALERT INDICATORS
Audible imbalance, leakage current, lid open, end of run
LINE POWER,VAC :220-240VAC , 50-60Hz
Environmental The equipment
6
UNOPS eSourcing v2017.1
requirements
suitable for working in the climate conditions of Iraq in terms of temperature & humidity
Automatic breakingair vent on the coverLED display and a keyboardTachometer to indicate the speed in rpm should be availableInner safety lids that fit over the rotor or tube covers that contain the sample material should be available
Gaskets with high quality material for tight seal
Bowl drains
The centrifuge should allow calibration by phototachometer manner with lid closed
Should use at least an 8 cm rotor radius50 μL sample, and a 75 mm capillary tube, inner protective cover over the rotor assembly
2
Centrifuge
16
Spins 3ml-15ml test tubes at 0-6000 rpm
Minimum 16 tubes
Easy cleanout bowl
0 - 6000 RPM
Digital programmable control and readout
Variable speed and time settings
Lid safety lock
high g-forces for fast separation
Rubber feet to prevent slipping
Impact-resistant lid
Zero-rpm interlocking lid
Wide mouth for easy clean-up
Metal rotor and tube shieldsBrushless motor Angled and (swinging )tube holder as alternativeFast breakingProgrammable time and speed Rubber feet to prevent slipping POWER REQUIREMENTS :220v ,50 Hz
3 Water Purification System 4
7
UNOPS eSourcing v2017.1
Purpose: is used for producing purified water to cover laboratory needs from distilled water.
Configuration: Bench top or wall mounting
External material: epoxy – polyester powder coated heavy duty material
Internal material: Stainless steel or Equivalent
The unit consists of Boiler & condenser· Microprocessor controlled· Distilled water capacity (20 lit/hr. )· Storage tank capacity : > 20· Alarms: visual or audial
Environmental requirements: the equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
POWER REQUIREMENTS: 220-240V, 50-60Hz
4 Photometric Microplate Reader/Washer (ELISA) 2
Application: ELISAs assay , Protein Quantitation , Nucleic acid analysis , Cell Viability, Proliferation, and Cytotoxicity, Kinetic assay , Enzyme assay , evaluate the quantity of antigen or antibodies associated with infectious viral diseases (e.g., HIV, measles, herpes, rubella) , other nonviral applications (e.g., mycoplasma pneumoniae) , other to be specified .
A - Photometric micro plate readers: PHOTOMETRIC METHOD: yes , manufacturer dependent on OPTICAL SYSTEM : measurement and reference channels required , multiple channel preferred
photometric accuracy : < 2 %measurement range, ABS : between 0 - 3,0, Or better wavelength range, nm : between 400 – 700,Or betterprecision: ±1%resolution, od : ≤ 0.01light source : Tungsten halogen or xenon flashphotodetector : photomultiplier tube(PMT) preferred and other to be specifiedFILTER TYPE :according to manufacturercompatible micro plates : flat or round or
8
UNOPS eSourcing v2017.1
bottom , 96 -well platesIsothermal reading chamber : optionalprogrammable assays : preferredAnalysis: Reading speed, sec/plate : ≤ 15/96-wellComputer interface :yesPrinter : yes (external or built-in)Bar-code reader: OptionalRobotics compatible : yesSelf-calibration :yesQuality control :yes B- Microplate Washers:Configuration: full plate washer or other to be specifiedautomatedwashing parameters : wash volume/time, soak time and otheruser programmable: yesPrograms:
- user definable: yes- number of cycles : ≥ 8- maximum soak time, sec: ≤
3.600 compatible plates: well plates other to be specifiedcapacity, number of plates: ≥ 1Wash head : multiple interchangeable wash heads of varying configurationsfluid reservoir :
capacity, l
wash ≤ 4rinse < 4waste ≤ 4liquid-level sensing Yesprecision, % cv ≤ 3minimum residual volume µl / well ≤ 5maximum dispense volume ml /well ≤ 3 power requirement( for system)
220/240 VAC, 50/60 HZ
Environmental requirements: The equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
5 Portable Glucose Analyzer 2
APPLICATION
measure blood glucose concentration using a reagent strip and a drop of capillary blood from a finger puncture
PATIENT TYPE Adult , paediatric, neonate
METHODOLOGY Electrochemical or Reflectance
9
UNOPS eSourcing v2017.1
photometry( preferred) and other
REAGENT STRIPS Yes
SPECIMEN TYPE
Minimum sample volume, µL
Capillary whole blood, venous blood, arterial blood, neonatal blood
≥ 0.3 MEASUREMENT RANGE, mg/dL 20- 500 or better
ALTERNATE-SITE TESTING
Forearm, palm, upper-arm
TEST TIME, sec Between 3 to 60METER CALIBRATION Yes
LOT-SPECIFIC CALIBRATION Yes
READOUT LCD
ALERT INDICATORS• High/low levels• Other
Out of measuring range, out of temperature rangeHypoglycemia, hyperglycemia, low battery, under-dose detection
AUTOMATIC SHUTOFF After 2 -5 min
BATTERY Yes
Life, no. of tests ≥ 1,000
Environmental conditions
The equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
6 Immunoassay Analyzer, Automated 1Application It is used in hospital
and clinical laboratories to run automated biochemical tests to detect the presence and concentration of substances in the samples. There are many types of tests that immunoassay analyzers can perform, including testing for cancer markers, diagnosing infectious diseases (viral or bacterial toxin determinations),
10
UNOPS eSourcing v2017.1
cardiac analysis, therapeutic drug monitoring, allergy testing, Endocrine hormone testing and protein.
CONFIGURATION Bench top and floor type
Connectable to LAS track Yes
Processing modes Continuous, random access ,stat
THROUGHPUT, max tests/hr ≥ 100SAMPLE CAPACITY ≥ 50
SAMPLE TYPESerum, plasma ,urine other should be specified
SAMPLE SIZE, µL < 250 Smallest is preferred
METHOD USED
Chemiluminescence immunoassay or Electrochemiluminescence (ECL) or fluroscence immunoassay(FIA )
TEST MENU
Anemia , Diabetes ,Cardiac markers, Endocrine function , Immunoglobulin, Toxoplasma, Thyroid markers ,Viruses, Tumor marker or others
REAGENTS, TYPE
Refrigerated on board
Liquid, ready-to-use or other type
YesSYSTEM FEATURES:
-Direct tube sampling-Liquid-level sensing-Clot detection-Auto dilution-Auto calibration-Auto wash
All Features should be available
DATA MANAGEMENTDisplay LCD , ≥ 15"Results stored YESComputer interface YESPrinter YESBar-code reader YESLINE POWER, VAC, Hz
220~240 VAC, 50/60 Hz
Backup power preferred
Battery or UPS
Environmental The equipment
11
UNOPS eSourcing v2017.1
requirements
suitable for working in the climate conditions of Iraq in terms of temperature & humidity
7
Laboratory Incubator
1
Purpose: used for growing microorganisms and cells that require oxygen for growth (e.g., bacteriology, virology, cultures) in hospital lab, specialist health center lab. & lab. of Primary health care unit.Configuration: tabletop or Floor TypeInner chamber stainless-steel and out chamber heavy duty materialType door : glass or / & solid doorKey Door lock :yesCapacity , L : 120 – 200 LNumber of Shelves : ≥ 2 , stainless steelTemp is controlled by thermostatTemperature range , °C : 5 to 50 °CTemperature Uniformity +/- 0.5°CAccuracy : ± 1 °CIllumination : internal lightControl system : microprocessor controlled temperature regulation display : digitalAlarms: audio & visual, Temperature, power failureThe heated air circulates through the chamber by fansAll the control switches & Pilot lamps are fitted on the front panelPower requirements: 220-240V, 50-60HzEnvironmental requirements: the equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
8 Light Microscope 10Purpose : to provide magnification and resolution of specimens under examinationHeavy duty and compatible designOBSERVATION TUBES Type binocular
Eyepieces 10x,15x, wide field, high-eye point
Interpupillary distance adjustment
mm : ≥( 55 -75), Adjustable
NOSEPIECE CONFIGURATION Quadruple or more
Objectives Magnification
(4x,10x,40x,100x) ,other should be specified
Objectives Type
Achromatic, plan achromatic, plan apochromatic ,or others
TOTAL MAGNIFICATION
≥(40x-1000x)
12
UNOPS eSourcing v2017.1
CONTRAST METHOD:Brightfield: yesDarkfield: yes Phase: optionalILLUMINATION:Condenser type: Abbe, achromatic &/ or other typeLight source: LED (preferred),halogen, or other STAND:Focusing mechanism: Moving stage, rack and pinionCoarse, fine adjustments: Coaxial, low mounted, ≥ 1µ incrementsSTAGE Type: Mechanical or betterTension adjustment CoaxialStage Motion X-YNumerical aperture 0.9 to 1.4Dust cover Yes
Environmental requirements
the equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidityPOWER SUPPLY: 220-240V,50-60Hz
9 Spectrophotometer: UV VISIBLE SPECTROPHOTOMETER
7
Purpose: To determine the absorbance or transmission of characteristic wavelengths of radiant energy by a chemical species in solutionCONFIGURATION: Double beam
LAMP TYPE(S) Halogen (Vis), deuterium (UV)
WAVELENGTH, nm Range : 190 -1,100
Accuracy: 0.3 -1MONOCHROMATOR Holographic grating
PATH LENGTH, mm 1-100STRAY LIGHT Minimum PHOTODETECTOR Silicon diode
Scan speed variable to at least 300
Accuracy ±<1%Reproducibility <0.5% @ 0-2 ANoise at 0 A <0.0002 ALinearity ±0.003 A/hrZERO DRIFT <0.0002 A/hrAuto Compensation yes
TEST TUBES different volume test tube holder
Display Color LCD DisplayPRINTER Ink jet, LaserJet
13
UNOPS eSourcing v2017.1
User programmable
Temperature control
PC-controlled Windows-based software to provide spectrum processing and storage, complex data calculation routines, Absorbance, factor, concentration, transmittance, scanning, DNA ratio, kinetics, calibration curves, linear and nonlinear, performance validation, multi method/result storage capability
Protein assay, DNA/RNA purity, concentration by factor method and enzyme kinetics, bacterial density, biocalculations
multiwavelength, peak picking photometryWavelength scanning, spectral manipulation, time course plot, superimposed plotQuantitative analysis, wavelength scan, time scan, fixed wavelength, baseline correction, absorbance/percent T, peak picking, peak height, peak area, peak width, derivativesMulticell/wavelength measure, peak seek, derivative, autozero, reaction kinetics with plot, histogram plot, gel scanning, curve fit and storage, formula entry, for multi derivativesComputer System interfaceMicrocell holder, test-tube holder
10
Laboratory Steam Sterilizer (30 L)
12
Type Steam sterilizerTable Top or on Trolley Operating temperature Max. 134 ± 5℃ ℃Pressure indicatorHeater: ElectricChamber material: Stainless steelChamber capacity: Approx. 30 LControl: Automatic control from sterilization to dryingNumber of instrument tray: Max. loadable number of offered itemTray RackSafety device: Automatic Door Looking system
Power requirement AC220V, 50Hz, single phase
11 Laboratory Water Bath 6Applications: sample thawing, bacteriological examinations, warming reagentsHeavy duty and compatible designMaterial: seamless stainless steelExternal: stainless steel, powder coated Temperature range: (10 C above ambient to
14
UNOPS eSourcing v2017.1
100)On off switch and display by thermometer graded for temperatureAccuracy: 0.2ºC Temperature preset buttonsCirculation Pump to mix waterMicroprocessor controlledHeater: 1000- 2000 wattsSafety Device for overheating protectionBath Volume: 20 litersWith stainless steel gabled coverThe exterior should remain cool, glass wool insulatorAlarm indicator for overheat limits, low water cutoffPower Requirements 220-240 V, 50/60 Hz
12 Laboratory Oven 50 L 11Temperature range 50°C ~ 300°CTemperature control: Thermostatically controlledInside material: Double /Triple walled Construction inner chamber made of Stainless steel with supports on the three sides for two/three adjustable perforated stainless steel shelves
Outside material: - Mild steel sheet painted/powder coated- Insulated stainless steel door with locking and rear zinc-plated steel
Capacity > 50 Itr.
Safety Alarm
- Yes (Audible and visual) - Optional automatically shut down protection circuit
Air circulating fanDigital timer
Power supply
- 220/240 VAC, 50/60 Hz - Over current & over heated protection circuit - Three Pin UK type Plug - Voltage corrector/stabilizer circuit of (Input 160-260 V and output 220-240 V and 50 Hz)
Other specification - On/off rocker switch with indicator - Adjustable wire mesh nickel plated trays/aluminum trays
15
UNOPS eSourcing v2017.1
- Digital indicator cum controller - The gap between the two walls filled with glass wool insulation - Easy-to-clean interior - Forced air circulation by quiet air turbine/Fan to ensure uniform temperature - Fitted with load indicator and safety thermostat take over indicator lamp. LCD/LED Indicator - Output available for data acquisition
Environmental requirements
The equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
13 Chloride Meter 11Easy, intuitive user interface with touch screen and multi-language prompts, which lead the operator through the entire measurement process. Factory calibrated so that manual calibration by lab personnel is not required. It can be equipped with an integrated printer and the results are sent in document-ready format or a PC for data transfer can be connected via USB .
Sample volume Approx. 55 µl, or less
Duration of measurement Approx. 30
secondsReproducibility ± 2 digits (20 µl) at
100 mmol/lMeasurement display 0 - 999 mmol/l
Measurement range 10 - 299 mmol/l
Resolution 1 mmol/l over the entire measurement range
Integrated stirring Magnetic stir bar PTFE, cylindrical
Power source 220 V (± 30V), 50Hz, 40 VA,
The measurement principle is based on color metric impulse titration as an absolute measurement method. Through automated sample recognition, the measurement
16
UNOPS eSourcing v2017.1
proceeds fully automatically after the sample is inserted without the need for manual confirmation by the user.
14
Dry Chemistry Analyzer (Strip)
13
Application: used for measuring quantitative results of many parameters from whole blood, plasma or serum within short time.
Parameters:
Bilirubin, Cholesterol, Creatinine, Glucose, Hemoglobin, Cholesterol, Triglycerides Uric Acid, Urea, Alkaline Phosphates, or other
Detecting method : Reflectance photometry, or other
Light source: LED
Light detector : photodiode or better
Sample type whole blood, plasma or serum.
Sample volume ≥ 25 μlMeasuring time: less than 5 min.Calibration: AutomaticDisplay: yes , LCD type Memory: ≥ 40 results with
( time ,date , ID)Built in PrinterData interfaceNoise level: < 50 dBA
UPS YES, power back up for ≥ 10 min
Environmental conditions:
The equipment suitable for work in the climate conditions in Iraq in term of temperature & humidity.
POWER REQUIREMENTS: 220-240V, 50-60Hz
15 Hemoglobin Meter 7
PURPOSE: For hemoglobin estimation
Detector: Silicone photodiode other should be specified
Measuring: Transmission/Absorption
Photometric accuracy: ± 0.002
Cuvette types: should accept different type of cuvettes
Display: hemoglobin level in g/dl or g/l, date and time
17
UNOPS eSourcing v2017.1
Measuring range: 0 - 25g/dl Hb, or better
Dilution ratio: should be stated Sample volume: minimum sample volume should be stated CalibrationQuality control with control cuvette
Sample material : Venus ,arterial or capillary
Environmental requirements
The equipment suitable for working in the climate conditions of Iraq in terms of temperature & humidity
Open system Power supply: 220V,50HzSample compartment: should be prepared for the use with cuvettes, integrated cover for the protection of the sample compartment against ambient light and dirt
16 Bilirubinometer 7Application To measure the
concentration of bilirubin in the blood
Where used Stat labs (hospital) ,amedical clinics
CONFIGURATION Benchtop
METHOD USED Spectrophotometry (Dual wave lengths)
Patient Neonate, optional (adult , pediatric)
Bilirubin measured Total, optional dirct SAMPLE TYPE Serum or whole
blood or plasma SAMPLE VOLUME, µL
≤60
Measurement time, sec
≤5
Calibration Automatic(preferred) Computer interface Optional features
(computer interface)USB port
Output Units: µmol /L or mg / dLRange, mg /dL: 0-30 or other rang corering this range
Display, type LED or LCD power 220 VAC ,50/60 HZ
Environmental requirements
The equipment suitable for working in the climate conditions of Iraq in terms of temperature
18
UNOPS eSourcing v2017.1
& humidity
LOT 2 – DENTAL
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1
Dental Unit
5
Pneumatic dental unit with automatic separator.Gearbox motor or hydraulic for dental chairMinimum height of dental chair (35 ~ 38cm).Maximum height of dental chair (75 ~ 80 cm)Adjustable headrest.Light projector with armDentist tray:Hand piece hanging type.Control panel (with X-ray viewer).3-way syringe.3-module Midwest (4-hole).Ultrasonic scalar.2 turbines (Midwest 4 hole, standard head, stainless steel body, ceramic bearing, push button chuck & autoclavable) one with fiber optic and small head and other turbine standard head without fiber optic.Air motor (forward & reverse control) Contra angle (1:1 direct drive, push button chuck, ball bearing, autoclavable, external water spray, non optic). Assistant tray:Control panel.3-way syringe module.LED curing light.Dry-line suction & saliva ejector & sucker & separatorSpittoon section:Spittoon.Cup fillerDental stool.Assistance stool. Distilled water tank.Air compressor with sound proof (cabinet).Air-suction motor.Foot controller.Input power: 220/240 VAC, 50/60 Hz single phase.External voltage regulator.External disposable filter for waterIntra-Oral Camera Environmental Requirements: The supplier confirms that: The equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
2 Digital Dental Radiography 3Type Dental X-Ray DigitalApplication X-ray imaging for
19
UNOPS eSourcing v2017.1
teeth and periodontium
X-RAY TUBE ANODE
- Type : Stationary - Minimum total filtration, mm Al:≤ 2.5- Heat capacity, HU: ≥ 6,000- Focal spot size, mm: ≤ 0.7
X-RAY GENERATOR
- Type: High-frequency- kV range: ≥ 60- mA range: Range ≤ 2 to ≤ 8
CONTROL PANEL According to manufacture (Digital)
MOUNTING Stand or wallIMAGING METHOD
Time to process and display image, sec Bit depth IMAGE SIZES, mmPixel size, µm
- Detector type : CCD or CMOS (complementary metal oxide semiconductors), Wire or wireless, water proof
≤ 5
≥ 12≥ 30 X 20≥ 15
IMAGE PROCESSING FEATURES
Standard image manipulation tools
NETWORKING YesPRINTER Laser COMPUTER SYSTEM
- up to date system - Monitor size, type : ≥ 17" LCD- Resolution, pixels : ≥ 1024 x 769- Storage : ≥ 500 GB hard disk drive
POWER REQUIREMENTSSMART UPS
220/240 VAC , 50/60Hz, Three pin plug (G type)≥ 15 Minute for Whole System .
Environmental Requirements
The supplier confirm that: The equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
3 Dental Ultrasonic Scaler 2Optic or Non-Optic, headpiece with suitable length of cordLCD display preferable
20
UNOPS eSourcing v2017.1
Sterilization caseHand piece standWide selection of scaling tips, Priced separatelyFrequency: 27KHz -33KHzOutput power: 3-30WContents: control unit, foot control, bottle of water, and AC power cordPower supply: AC (220 -240)v (50-60)Hz
4
Dental Unit Autoclave
2
Application: sterilization of solid instruments, hollow instruments, packed instruments & porous loads. Microprocessor controlled.Self-evaluations on the process of sterilization, automatic failure detection report. Instant vaporizer outside the chamber.Inner Chamber capacity: (18~23) liter, stainless steel.Integrated printer (optional).Safety locking systemLCD displayWater supply system: reservoir (≥3.5 L distilled water and ≥ 5L waste reservoir).Possibility of serial connection to a PC, with cycle data recordingTray holder contains ≥2 tray.Vacuum pump performing two stage (pre & post vacuum).Thermal drying system to ensure sterilizing dental instruments without spotsFull water alarm system.Input power: 220/240 VAC, 50/60 Hz single phase. Accessories: tray extraction handle.Replacing the device filters covered in the warranty.Environmental Requirements :The supplier confirm that: The equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
5
Light Cure
1
Application: Solidify all brands of resin materials of light cure.Heavy duty & compatible design.Light source: LED.Light probe: autoclavable.Adjustable working time.Spectrum range: (400 ~ 500nm).Protection fuse.Acoustic signal: acoustical after 10, 20, 40, 60 sec etc.Input power: 220/240 VAC, 50/60 Hz single phase. Accessories: - Eye-protecting cover or optic light
guide.
21
UNOPS eSourcing v2017.1
- Additional light probe.
LOT 3 – IMAGERY
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1 Mobile X-Ray Unit Digital 5APPLICATION Radiographic imaging
of patients who cannot be transported to radiology department
SYSTEM TYPE Description
Mobile digital radiographic systemIntegrated digital (not upgraded from analog to digital)i.e. (not retrofit)
TYPE OF POWER SOURCE BatteryCan be directly powered by AC line
Yes Yes
X-RAY TUBE ANODE
Heat capacity, HU Cooling, HU/min Maximum output, kVp Range Increments mAs range
Rotating
≥ 200,000≥ 20,000≥ 120 ≥ (40-120) Yes ≥ 300
X-RAY GENERATOR Power rating, kW
High-frequency generator ≥ 30
ALUMINUM FILTER, mm
Yes
SID RANGE, cm According to manufacturer
INDICATOR METERS
Type kVp mAs
Digital Digital Digital
TUBE MOVEMENT
Horizontal, cm
Vertical, cm
Rotation :
Z-axis, °X-axis, °
Applicable for the need of different radiological examination Yes (specified by the manufacturer)Yes (specified by the manufacturer)
Yes (specified by the manufacturer)
22
UNOPS eSourcing v2017.1
Yes (specified by the manufacturer)
HANDHELD CONTROL Cord length, m
Yes
Wire or wireless DIGITAL DETECTOR Type Pixel size Wireless Size, cm Size of built-in display monitor Type of network connectionProcessing (analyses) toolsFilm storage capacity
DR CSI≤ 160 µm Yes ≥ 35X43≥ 15" color screen LCD medical monitorDICOM 3.0Specified by the manufacturer ≥ 120 GB
PATIENT-CENTERING/ COLLIMATOR LIGHT
Yes
Power supply Line voltage
- Medical Approved power supply board - 220/240 VAC , 50/60 Hz single phase,- Three pin UK type plug
2 Portable Ultrasound 3Scanning mode Convex/Linear/Micro-
convexDisplay modes B,B+B,B+M,M,4BScanning depth 240mmGray scales 256Cine-loop ≥ 500 frames Image permanent storage
≥ 64 frames
Image conversion up/down, left/rightLocal zoom 2 times both in real-
time and frozenMeasurement Distance, circumferenc
e, area, volume, , heart rate
OB measurement BPD, CRL, FL, AD, HC,AC, EDD, GA, FW
Probe connector ≥ 3Monitor ≥ 15 inch Wide application Abdominal, OB/GYN,
urology, Doppler, cardiology, small parts examination, …etc
Probes Standard configuration approx 2-5 MHz convex probe ,transvaginal 4-8 MHz Optional configuration optional probe ( 5-
23
UNOPS eSourcing v2017.1
10MHz Linear,Probe)Power Supply - 220/240 VAC, 50/60
Hz - Over current & over heated protection circuit - Three Pin G type Plug- Voltage corrector/stabilizer circuit of (Input 160-260 V and output 220-240 V and 50 Hz)-UPS (Rechargeable battery) of suitable rating with voltage regulation and spike protection for ≥ 15 minutes back up
LOT 4 - MED
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant?
Bidder to complete
Details of goods offered. Bidder to
complete
1
Otoscope
5
Offering clear, live and still images of the ear canal and tympanic membraneChrome Plate handleStandard, heavy duty rechargeable batteries.Reusable and disposables specula different sizesSoft pouch or hard Plastic caseRheostat for adjustment of illuminationFiber optic for cool, obstruction free light transmissionMagnification z(2.5-≥3) X.Bulb: LED typeEnvironmental requirements: the equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity
2 Fetal Heart Detector, Ultrasonic 8TYPE/CONFIGURATION
Handheld
APPLICATIONS Detect fetal heartbeat measure FHR
FHR DISPLAY RANGE, bpm
≤ 60 - ≥199
PROBEFrequency, MHzOutput, mW/cm²
≥ 12 to 3< 20
OUTPUTSSpeakerHeadphones
YESOptional
24
UNOPS eSourcing v2017.1
DisplayDisplay variables
LCD , LED or better FHR
CONTROLS Volume, power on/off
POWER REQUIREMENTSBattery, type
Operating time, hrLow-battery indicator
Rechargeable preferred or Alkaline or dry cell ≥ 2YES
Accessories Ac adapter for rechargeable battery CaseGel (start up qty.)
Environmental requirements:
The supplier should be confirmed that: The Equipment is suitable for work in climate conditions of Iraq in terms of temperature and humidity.
3 General Surgical Operating Table 2Application General TABLE POSITIONS(Degrees from horizontal)Trendelenburg
Reverse Trendelenburg
Lateral tilt
≥25
≥25
≥18Vertical range, cm (in) Height adjustment
with mattress(750-980) mm
TABLE SECTIONS Head section (removable), Back section, seat section, Split Leg section (Removable)
Back section (+85 Degree, -45 Degree)
Foot/leg section (+20 to -90 )Head section VariableACCESSORY SIDERAIL
Yes
PERINEAL CUTOUT YesMAXIMUM PATIENT CAPACITY, kg (lb)
Max. dynamic load capacity ≥ 200
CONTROLS
Type
Wired remote control and Foot controlElectric or
25
UNOPS eSourcing v2017.1
Manual override
Electrohydraulic or Electromechanical Yes
Radiolucent tabletopC-arm accessible
YesYes
ACCESSORIES2 arm board 2D Left & Right with attachment clamp, pair of shoulder support with attachment clamp , Body straps, Anesthesia screen
DIMENSIONS, H x W x L, cm (in)Fully extended
(width , Length 4 section) W 500mm or less , L 2000mm or more
Column housing Stainless steelCaster lock Yes POWER REQUIREMENTSBattery
Power input 220-240VAC, 50Hz.YES
Environmental requirement
The supplier should be confirmed that: The Equipment is suitable for work in climate conditions of Iraq in terms of temperature and humidity.
4 Infant Incubator 11Application Used for providing
a closed controlled environmental that warms an infant by circulating heated air over the infant skin.
Operating modes Air temperature control.
Skin temperature control (servo controlled)
MOBILE Yes, castors( size≥ 10 cm) with breaks
TEMPERATURE CONTROL RANGE, °C:Air (Increment: 0.1°)
Skin (Increment: 0.1°)
Min:(20-25°) Max: (37- 39°)°
Min:(33-35)°
Max:(37-38)°
26
UNOPS eSourcing v2017.1
TEMPERATURE DISPLAY (air & skin)
Digital or LCD(LED)
ALARMS High air temp
Low air temp High skin
temp Low skin
temp Fan failure Sensor
failure Power
failureBACKUP THERMOSTAT
YES
HEATER POWER INDICATOR
YES
HAND PORTS ≥4TUBING PORTS ≥5O2 SOURCE
Inlet Ports
Controllers
Alarm
≥1
servo controller preferred ( 21%-60%)
YES
Supplemental HumidityAdjustable Water tank for humidity control
YESYES (Digital controller)Shall be removable and sterilizeable
Internal Noise, dB ≤ 60Double Wall YESMattress Water proof Trendelenburg + 12 degreeAccessories IV pole.
Drawers in-bed
scale integrated
x-ray tray Disposable
temperature sensors (25 pcs)
Options: Battery up for alarms & Trends to 1 hr.
Variable-height stand.
Environmental The equipment
27
UNOPS eSourcing v2017.1
requirements suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
Disinfection: According to manufacturer The manufacturer should specify the types of disinfectant suitable to the incubator. Should be not affect the incubator coating & environment.
5 Infant Scale 6Material & Design 1)Ergonomic tray
provides secure
support with a
robust plastic tray
for easy and
hygienic cleaning
2)Secure and non-
slip positioning with
rubber feet
Power supply - 220/240 VAC,
50/60 Hz
- Over current
protection circuit
- Three Pin UK type
Plug
- Voltage
corrector/stabilizer
circuit of (Input
160-260 V
and output 220-
240 V and 50 Hz)
- Can work using
( alkaline or
chargeable)
battery(s)
- Battery Life > 200
hours for not
28
UNOPS eSourcing v2017.1
chargeable type of
batteries
Other specification 1) simple and
convenient 1-key
operation
2) Automatic Data
Hold Function
Batteries included
Weighing range >10KgWeighing accuracy 0.01 KgDisplay Digitaldimensions(W x D x H) mm
To be mentioned
6 Infusion Pump 2Application Accurately deliver
liquids through intravenous (IV) or epidural routes for therapeutic and/or diagnostic purposes
CONFIGURATION Number of channels
≥1
DISPLAY Data displayed
Alarms, drug name, pumping status, volume infused, VTB
PUMP CAPABILITIES Flow range, mL/hr Increments, mL KVO rate, mL/hr Accuracy, % VTBI Selector, mL Automatic piggybacking Fluid resistant Front-panel lockout
≤ 1- ≥999 0.1-100 mL/hr 1-≥3±5 Yes(1-9,999) Yes( if number of channels > 1).Yes Yes
Type of system OPEN SYSTEM, the pump must be able to operate using standard (non-dedicated) IV set from multiple manufacturers
IV SET Free-flow protection Air-trapping capabilityNeedleless IV connection
YesYesYes
ALARMS & INDICATORS Occlusion upstream Occlusion downstream Detection mechanism
Yes Yes Yes
29
UNOPS eSourcing v2017.1
Pressure, psi Real-time display Air in line System malfunction Set loaded improperlyDoor open Infusion complete Low battery Depleted battery Clinical advisory messages
≤15 YesYes Yes YesYes Yes Yes Yes Yes
AUDIBLE ALARM Volume control Momentary silence
YesYes
DOSE ERROR REDUCTION SYSTEM (smart technology)Defaults to DERS on startupLibrary sizeNo. of care areasNo. of drug entities per care areaDATA PORT
Yes
Yes
≥ 100≥10≥100Yes
EVENT LOG Events stored
Yes , by InterfaceKey presses, program settings, alarms, volume infused, dose limit warnings
*Power supply Line voltage BatteryLife, hr @ flow of 100 mL/hrRecharge time, hr
Medical Approved power supply board 220/240VAC,50/60Hz, Three pin (G type) plug YES≥5<8
7 Mobile Surgical Light 4Application Surgical lights
illuminate the surgical site for optimal visualization of small, low-contrast objects at varying depths in incisions and body cavities
LIGHT SOURCE, TYPE Number of light heads
Number of LED s
Volts
Service Life, hr
LED Single
Should be specified
According to LED type
≥ 30,000
COLOR 4,000-5,000
30
UNOPS eSourcing v2017.1
TEMPERATURE, K Adjustable
Yes
COLOR RENDERING INDEX
R9 value
≥ 94≥ 90 (higher preferred)
FIELD SIZE, cm Diameter Depth
≥16 ≥ 80
FOCAL LENGTH, cm ≥ 65
ILLUMINATION LEVEL, maximum lux at 1 m
≥ 100,000
MOUNTING mobile floor stand
CONTROLS Dimmer Focus Field size On sterile handle
YesAdjustableAdjustableYes 2 for each unit
REFLECTOR MATERIAL
According to manufacturer
Light head diameter, cm
To be mentioned
Power supply - 220/240 VAC, 50/60 Hz- Three pin G type plug- ≥ 1 hours back up battery(s) with automatic charging and change over circuits
8 Phototherapy, Free Stand 8
TYPE FreestandingANGLE ADJUST, ° AdjustableIRRADIANCE @ 420 to 480 nm, µW/cm²/nm
400-550 (any value between)
FAULT PROTECTION Fuse or breakerLIGHT SOURCES LEDType: LED Number needed: To be specified by manufacturerExpected life, hr ≥ 8,000HOUR METER YesPROCEDURE TIMER PROCEDURE
TIMERHeight adjust Yes
≥ (107- 150) or wider range
Radiometer Optional Others The unit should be
mobile with swivel castors fixed to a base to be accommodated beneath incubator /cot.
31
UNOPS eSourcing v2017.1
Accessories: glasses for eye protection & UV filter cover.
Power & Environmental Requirements
Input power: 220/240 VAC, 50 Hz single phase, minimum length of the wire (3m). Three Pin G type Plug, Voltage stabilizing and over current protection circuit.The supplier should be confirmed that: The Equipment is suitable for work in climate
9
Sphygmomanometer
49
Stationary blood pressure measurement device..The precision pressure gauge is recessed in a premium, impact-resistant, is easy to clean the ABS housing.The easy to use spiral hose, inflation bulb with precision adjustable threaded discharge valve and optimized readability on the oversize scale through anti-glare glass guarantee ultimate functionality.
10
StethoscopeAcoustic sensitivity and durability.Traditional bell.
44The device has conventional combination of two-sided chest piece. One side of the device has tunable diaphragm and on the other side it hasThe headset is anatomically designed. black tube colors.
11 Surgical Suction Unit 14Application: suctioning to remove blood and irrigating fluids that accumulate in the operative field and obstruct the surgeon's view, used in OR, Wards , ICU, and others.CONFIGURATION: Mobile on cart with castorsPUMP TYPE: Piston, or Diaphragm, Others to be specifiedNumber of pumps: ≥ 1VACUUM LIMIT, mm Hg, (cmH2O): ≥ 500 , (679.75)Free airflow, L/min ≥25VACUUM CONTROL YESCOLLECTION CANISTER(S)
Reusable &Disposable
Number ≥2Capacity limit line, mL ≥2000Overflow protection YES
32
UNOPS eSourcing v2017.1
FILTER TYPE Bacterial, hydrophobic
STANDARD ACCESSORIES(Included in Warranty)
Collection bottle.
Filters. Cart.
Optional **footswitch
Electrical Ratings - Power Supply -220/240VAC- Rated Frequency 50/60Hz
Environmental The supplier should be confirmed that: The Equipment is suitable for work in climate conditions of Iraq in terms of temperature and humidity.
12
Ophthalmoscope
4
Application Diagnosis of eye
Component Interchangeable handleOphthalmoscope head
Battery (dry cell or rechargeable )
Power requirement Ac Adapter be 220-240VAC, 50Hz.For rechargeable battery
Corrective power range
From- 20 to +20 or wider range
Aperture: 5 apertures or moreFilter red-free , others to
be specified Light source LED
color rendering index > 95
Number of Lenses ≥ 18Environmental requirements:
The supplier should be confirmed that: The Equipment is suitable for work in climate conditions of Iraq in terms of temperature and humidity.
13 Digital Scale 11Electronic
33
UNOPS eSourcing v2017.1
LCD displaycolumn typewith BMI calculationkg (496.04 lb) \0.1 kg (0.22 lb) or morewaist-level digital physician scales LCD display with Body Mass Index calculation powered by 6 AA batteries or equivalent or optional AC adapter (neither included). Height rod available.500 lb x 0.2 lb / 225 kg x 0.1 kg capacity. or more
14
Oxygen Cylinder
5
The Steel "M" medical oxygen cylinder back up units or to use to supply oxygen filling system. The Steel "M" cylinder can supply up to 3540 liters of oxygen. The cylinder comes standard with a CGA540 valve and can be conveniently stored using our STANDM60T01-A adjustable cylinder stand.
15 Surgical Curettage Set 3All should be stainless steel – each set should contain the followings: DRESSING FORCEPS, 25 CM 1 pc. setTOWEL FORCEPS, BACKHAUS, SHARP, 9 CM 4 pcs. setSPONGE FORCEPS, BOZEMANN, S-SHAPE, 26 CM 1 pc. setSPONGE FORCEPS, RAMPLEY, STR., 24.5 CM 2 pcs. setCATHETER F. WOMEN, CVD., 14 CH, 15 CM 1 pc. setVAGINAL SPECULUM, SIMS, 65X25/70X30 MM 1 pc. setVAGINAL SPECULUM, SIMS, 70X30/70X35 MM 1 pc. setVAGINAL SPECULUM, AUVARD, 75X43 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 3/4 MM
1 pc. set
UTERINE 1 pc. set
34
UNOPS eSourcing v2017.1
DILATOR, HEGAR, DOUBLE, 5/6 MMUTERINE DILATOR, HEGAR, DOUBLE, 7/8 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 9/10 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 11/12 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 13/14 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 15/16 MM 1 pc. setUTERINE DILATOR, HEGAR, DOUBLE, 17/18 MM 1 pc. setUTERINE PROBE, SIMS, MALLEABLE, 33 CM 1 pc. setTENAC. FCPS., SCHROEDER, 1X1 T., 25.5 CM 2 pcs. setUTER. CURETTE, 6 MM, SH., RIG., 30.5 CM 1 pc. setUTER. CURETTE, 11 MM, SH., RIG., 31 CM 1 pc. setUTER. CURETTE, 14 MM, SH., RIG., 31.5 CM 1 pc. setUTER. CURETTE, 6 MM, BL., RIG., 30.5 CM 1 pc. setUTER. CURETTE, 11 MM, BL., RIG., 31 CM 1 pc. setUTER. CURETTE, 14 MM, BL., RIG., 31 CM 1 pc. setOVUM FORCEPS, WINTER, CVD., N.
1 pc. set
35
UNOPS eSourcing v2017.1
2, 28 CMTissue forceps 2 pcs. setRetractor, small 1 pc. setRetractor, medium 1 pc. setScalp handler, 3, 7 and 3L one each 1 set setSterilizing Case 1 pc. set
16
Lead Barrier 3mm Lead 1x2 M
9
Small Window X-ray Mobile BarrierDimensions (80*190CM).(W*L) ,Or better Thickness of 2mm or better Powder coated steel frames, precision TIG welded for years of trouble-free service completely enclosing the leaded glass panel for increased durability and safetyLead glass or lead acrylic options available3 mm lead equivalent opaque base covered in “Sintra” plastic for easy cleaning and durabilityModular parts can be easily replaced, including the glass if needed.Stainless steel or coated metal finish. Swivel casters.Window OptionsLead: 2 mm Pb equivalencyAcrylic: .50 mm Pb equivalency
LOT 5 – MEDICAL FURNITURE
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1
Bedside Cabinet
5
With metallic drawer and cupboard.Upper board made of plywood with antis hock edges in ABS plastic.Feet with non-slip ends.Made of epoxy coated sheet steelDIMENSIONSApprox. 390 x 480 x 880 mm
2 Examination Couch With Steps 23Backrest adjustable by self-locking system with bilateral controlThick foam with high quality vinyl fabric upholstery, at least 65 mm thickPaper roll holder with one rollWelded tube reinforcementTips of pads adjustableTubular stainless steel frame Ø 30 mm or better Non slippery, two level stepladder made up of stainless steel Or coated metal with a tubular frameApproximate dimensions (L x W): 1800 x
36
UNOPS eSourcing v2017.1
600 mm
3
Drug Trolley
4
Transport, multi-function2 detachable 2 pressed trays or more, with dimensions of minimum 600 x 400 x 60 mm.Two drawers or moreHandle to facilitate movementsø80 mm casters or more, with bumpers (two with brakes).Slide removable basketMade of stainless steel Minimum Dimensions: 950 x 420 x 830 mm
4
Stainless Steel Paravane
22
Folding 3-section screen panel for hospital useConstructed of stainless steelWashable curtains (White color fabric)Each screen panel folds independentlyWith rolling wheels Dimensions: - Hight: 180 cm approx.- Width (for each section): 60 cm approx.- Total width: 180 cm approx
5 Delivery Bed 2Application: used for birthing cases. Table’s upper flat surface has ≥3 sections.Frame: powder coated or stainless steel bed frame.Mattress: dynamic surfaces (multi-layer plywood, foam & leather).Height, back rest, Trendelenburg, table’s head & foot parts are controlled by controller buttons within the side rail.Type: electro-hydraulic.Dimensions:L×W: Pease specify H: (≥60 cm) ,(+.-)10cm4 Castors(size ≥12.5 cm) with 2 breaks.Patient weight: (≥175kg).Drain pan: yes.Number of motors: (≥2).Bumpers: yes.Input power: 220/240 VAC, 50/60 Hz single phase.Movements:Adjustable backrest.Adjustable leg section.Adjustable Trendelenburg & reverse TrendelenburgAdjustable height.Adjustable foot section.Standard accessoriesLeg rest (knee crutches).Foot rest.Side rails.Lifting pole.IV pole (2 or 4 hooks).Labour / squatting bar.
37
UNOPS eSourcing v2017.1
Monitor tray.Arm rest.Battery backup.Optional accessories:Removable headboardEnvironmental requirements: the equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
6
Phlebotomy Chair
4
Functions movement: up/down, back section turn, and leg section turn.castors :NOMaterial: high quality (strength).Easy to clean seamless cushions, Antimicrobial fabricAllows right or left-sided proceduresChair dimension : To be mentioned Arm board swing out : 0~≥ 45oArm board height adjustment : ≥ 70mmArm board slide ≥80 mmArm board dimension : To be mentioned Capacity(loading):≥140 kg
7
IV Pole
11
The minimum features of the intravenous pole shall be:Material of IV pole: stainless steel (grade: 304)Number of IV hooks: 4Minimum payload capacity of each hook: 2 kgMaterial of hooks: stainless steel (grade: 304)Height: shall be with adjustable rod height (approx.. 120 to 200 cm)IV pole base: with 5 anti-static swivelling castorsIV pole base design: the base shall be with low center of gravity to ensure stability
8
Wheelchair
5
Aluminium footrestFolding manual wheelchair.Varnished steel. Max load at least 120 Kg.Manual wheelchair in varnished steel with removable rear wheels quick-release 12" PU.Removable footrests.Leather upholstery and flip-open armrests. Wheels for narrow passages. Head rest with stands
9 Stretcher Stainless Steel 4Pneumatic back raiseHi-lo adjustment by torque release handleAluminium or steel frameVinyl leather mattressRemovable stretcher aluminium plate platformOxygen cylinder holder
38
UNOPS eSourcing v2017.1
Fold-down safety side railsIV PoleDimensions : 550W x 1905L x 666~1016mm H150mm caster with total locking system
10
Dressing Trolley
28
Transport, multi-functionTwo detachable 2 pressed trays with dimensions of minimum 600 x 400 x 60 mm. ≥ Two drawers. Handle to facilitate movements. ≥ ø80 mm casters, with bumpers (two with brakes). Slide removable basket Made of stainless steel Minimum Dimensions:800 x 420 x 830 mm
LOT 6 – MONITORING
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1 ECG 21MEDICAL APPLICATION
Detect the electrical signals associated with cardiac activity and produce an ECG, a graphic record of the voltage versus time to diagnose and assist in treating some types of heart disease and arrhythmias.
PATIENT TYPE Adult, paediatricType Open System CONFIGURATIONCART
PortableYes with ECG cable holder
LEADSSwitchingSensitivity, mm/mV
Calibration signalFrequency range, Hz
Diagnostic
FilteredCMRR @ 60 Hz, dBLeads-off indicator
Automatic, optional manual ≥ 3 values ex. (5, 10, 20)Automatic, optional manual Range ≥ (0.05-150)HzYes ≥ 100Yes
RECORDERNo. of channelsRecordingmethod
Printer
12 leadsThermal array
Integrated
39
UNOPS eSourcing v2017.1
Paper size
Lead marker
Timing marker
Event marker
Chart speed, mm/sec
Channels acquired simultaneouslyChannels printed simultaneously
According to manufacturer Yes
Yes
According to manufacturer
Minimum ≤ 25, Maximum ≥ 50(steps should specified by the manufacturer)
≥ 12≥ 12
NO. WAVEFORMS DISPLAYED
≥ 12
NO. WAVEFORMS STORED
Specified by the manufacturer
ECG TRANSMISSION TO ECG DATA MANAGEMENT SYSTEM
Yes
PROGRAMS Adult resting ECG, other specified by the manufacturer
USER INTERFACE Keyboard or Touchscreen
STORAGENormal, no. ECGs
≥ 50PATIENT DATA Name, sex, age,
others (specified by the manufacturer)
MEASUREMENTS Arrhythmia ID
Other printouts
Yes HR, PR,QT and others YesOptional (Specified by the manufacturer)
4.8.1 ST segment analysis
Yes
INTERPRETATIONAnalyzed waveformAnalysis window (sec)
YesSpecified by the manufacturer≥10
PREVIEW SCREEN YesDISPLAY TYPE ≥ 7 in. LCD or TFT
or betterVISUAL INDICATORS
Specified by the manufacturer
DEFIBRILLATOR OVERLOAD PROTECTION
Yes
40
UNOPS eSourcing v2017.1
Reusable vElectrodes for startups
At least 5 sets
BATTERY OPERATION
Battery type (No.)
According to manufacturer (device should be able to work on direct AC line)Specified by the manufacturer
Power supply Line voltage
Medical Approved power supply board - 220/240 VAC , 50/60 Hz single phase, Three pin G type plug
2 Defibrillator- Monitor With AED 4Acuity Area OR. , ICU. PICU ,
CCU , wardsEnergy selection
-External: (≤ 2 -≥200)J BiphasicPaediatric / Neonatal: (2-20) J.-Internal: MAX. 50 J
Paddles (adult + paediatric)
ExternalInternal
Paddle controls Charge, discharge, Others to be specified
Synchronizer Yes AED mode Yes with disposable
pads start up qty for at least 100 patients
CPR measurement and feedback
ECG MONITOR - Color LCD or better- Screen, (in): ≥ 6- Sweep speed, mm/sec: ≤ 50 selectable.- Lead configuration: ≥ 3. Through-the-paddles monitoring- HR display- HR alarms- Lead-fault indicator
Reusable ElectrodesDisposable electrodes
Adult and paediatric , start-up Qty (should be specified)start-up Qty for at least 200 patient
Self-test YesExternal pacemaker - Pacing mode:
demand and fixed.
41
UNOPS eSourcing v2017.1
- Pacing rate (ppm): ≤(40-210)
ECG RecorderAnnotation
- Thermal printer.Time, date, lead, gain, heart rate, operating mode.
Other Monitored Parameters
- SpO2- NIBP
Cart YesPower 220-240VAC,
50Hz,G type Plug.Battery PowerOperating time, hrFull Recharge time, hr.
Rechargeable≥ 2 continuous ECG monitoring or ≥ 100 discharges.≤ 4>
protection Against harmful ingress of water:IP24, IP21Against electrical shock: Type Class Iequipment
Environmental requirements:
The equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
Acuity Area OR. , ICU. PICU , CCU , wards
Energy selection
-External: (≤ 2 -≥200)J BiphasicPaediatric / Neonatal: (2-20) J.-Internal: MAX. 50 J
LOT 7 – VENT Equ.
Item No UNOPS minimum technical requirements Qty.
Is quotation compliant? Bidder
to complete
Details of goods offered. Bidder to complete
1 Anaesthesia Machine 3
MEDICAL APPLICATION
Dispense a mixture of gases and vapors and vary the proportions to control a patient's level of consciousness and/or analgesia during surgical procedure.
PATIENT TYPE Adult, pediatricPipeline gas inlet 3 (N2O, O2, air),
including hoses with
42
UNOPS eSourcing v2017.1
probes to outlets, probe to be compatible with the type of outlets in the hospital
Gas cylinder yokes
(O2, N2O, air), including hoses to connect to backup cylinders with regulators
Vaporizers agentsNumberInterlock Agent level indicator
Isoflurane, sevoflurane≥ 2Yes Yes
O2-fail safe Yes Hypoxic mixture fail-safe Yes
Automatic ventilatorBellows size or otherVentilation modes
Tidal volume (cc)
Minute volume (L/min)Frequency (Bpm)Inspiratory flow (L/min)Pressure limit (cm H2O)PEEP (cm H2O)
Yes -Adult, pediatric-Manual / spontaneous, VCV, PCV, SIMV or pressure support & pressure control volume guaranted-Minimum (≤20) and for neonatal option (≤5 by pressure control or volume control), Maximum (≥1400)-≤ (0-100)
-≤ (2-100)-≤ (0-200)
-≤ 125 (adjustable)
-≤ (0-50)System checks Yes Scavenging system Passive
Breathing circuit
Startup kit with CO2 absorption canister (soda lime or barium lime)
Monitors Air way pressureWhere measured High pressure alarmSubatmospheric pressure alarmContinuing pressure alarmLow pressure/apnea Expiratory volume/flowType of sensorWhere measured Apnea alarm
Yes Inspiratory limb or expiratory limbYesYes
Yes
Yes Yes According to manufacture Expiratory and/or inspiratory limb
43
UNOPS eSourcing v2017.1
Reverse-flow alarmHigh/low minute volumeHigh/low flowCapnograph O2 concentrationType of sensorResponse time (sec)CO2 concentrationApnea alarm
Yes Yes Yes Yes Yes Yes According to manufacture≤ 35Yes Yes
N2O Agent monitorsType of agentAuto IDAgent concentration alarm
Yes Yes Isoflurane, sevofluraneYesYes
Display NOType size
- ≥1- color LCD or better≥12ʺ
User interface According to manufacture
Event logTrack alarmsTime and date stamped
Yes Yes Yes
Accessories
-Reusable patient circuits for adult, pediatric and neonates-Reusable anaesthesia masks for adult, pediatric and neonates -Reusable re-breathing bags for adult, pediatric and neonates -Reusable flow and oxygen sensor-Disposable microbial filters with heat & moisture exchangers (HME) for adult, pediatric and neonates-Test lungs -Soda Lime-Articulating patient circuit holder/arm
Power supply Input power
220/240VAC,50/60Hz, Three pin (G type) plug, voltage stabilizing and over current protection circuit
44
UNOPS eSourcing v2017.1
Back up battery Yes, ≥ 0.5 (hr)2 CPAP , Neonate 5
Application - Deliver air or a mixture of air and oxygen (O2) through a nasal mask or nasal tubing to the patient’s airways- Non – invasive
MODES CPAP &Optional Bi-level CPAP (other modes should be specified)
MASKConfigurationMaterialNo.Size
Nasal prongs , nasal mask (neonatal size)Any except (PVC), latex freeStart-up kit (Qty: should be specified )neonate
CONTROLSInspiratoryPressure, cm H2OExpiratory
Pressure, cm H2ORate, bpmTrigger sensitivity
Min ≤ 6MAX. ≤40
according to operating modes.
MIN ≤ 4 MAX≤ 25≥ (1-30) optional according to operation modeAutomatic or adjustable
MONITORED PARAMETERSRespiratory rateFlow rangeLeakPEEP / or PIPOther
Optional according to available modesYesYesYesShould be specified
PC COMPATIBLE YesSoftware Yes
EQUIPMENT ALARMS:
Power failureFaultMask alarm or pressureLow battery
Preferred
YesYes Yes
DISPLAY TYPE LED or LCD or better
NOISE LEVEL, dBA ≤ 45
45
UNOPS eSourcing v2017.1
Air/O2 supply YESHumidifier YESCompressor or turbine
YES
Oxygen analyzer YESAIR FILTER Yes (changing filter
the responsibility of the supplier during the warranty and maintenance period).
TUBING Length, cm (in)Material
Yes ( start-up Qty should be specified )≥ 180Any except (PVC)
ACCESSORIES Complete manufacturer line of accessories (Should be specified )Bonnets for single-use ( start-up qty should be specified )
BATTERYRechargeableOperating time, hrCharger
Yes≥ 1 hrYes
Power supply - Medical approved power supply board- 220/240 VAC, 50/60 Hz, Three pin G type plug
Environmental requirements
Manufacturer confirms that the equipment suitable for work in the climate conditions in Iraq in terms of temperature & humidity.
3 Nebulizer 20Method of Nebulization
Ultrasonic Vibration
Ultrasonic frequency 1.7MHz+-10%Maximum pressure 200kPa
Frequency ≥ 2.5MHZ Oscillation rate
Continuous working time ≥ 4 hours
Operating Humidity & Temperature Range
10°C- 40°C | 30%-95%RH
Storage Humidity & Temperature Range
0°C - 70°C | 30%-95%RH
Particle Size diameter
0.5-5.5 (MMAD-3.8 Microns)
Max nebulizing ≥ 4ml/minDroplet diameter 1~5 μmCapacity of cups Small cup ≥ 100ml
Large cup ≥350 ml
46
UNOPS eSourcing v2017.1
Mechanical timing Step less adjustable 0-60min
Water tank ≥ 300 mL observed by water level line
Accessories portable battery pack, pediatric mask, adult mask, AC adapter, nozzle, air filter and mouthpiece, closed water chamber system, timer and air flow adjuster, 9-12 VDC DC adapter, carrying bag
Power supply - 200/240 VAC 50/60 Hz , 9-12VDC- Typical solid state, over – current circuit protection
Battery Rechargeable ≥ 3 hours backup battery
Other specification Silent operation(totally noiseless), compact design and one hand use makesTreatment times are 50% less than a motor driven nebulizerSafe – Low battery indicatorOverheat protectionDistilled water or drinking water can be used
4
O2 Regulator, Low Pressure
10
Application:For use on MEDICAL oxygen cylinders
Have a 20-micron, sintered-bronze inlet filter.All flows are tested to accuracy within +/- 15 percent tolerances.Brass components in high-pressure areas and relief valve zones.Standard Liter Flow Options: 0.5, 1, 2, 3, 4, 5, 6, 8, 10, 12, and 15Inlet Pressure: approx. (200-3000) PSI
1. General requirements:1. All medical equipment shall be 100% new and from current manufacturer production lines. It must
NOT be refurbished. It must NOT be discontinued at the time of signing the Contract.
47
UNOPS eSourcing v2017.1
2. All medical equipment must be CE, FDA, and/or TUV certified (or equivalent). Quality assurance test certificates shall be submitted to UNOPS, whenever requested.
2. Full functionality1. The offered medical equipment shall include a full set of compatible parts, components, accessories,
software, hardware, start-up consumables and howsoever required to put the medical equipment into fully operational condition to the satisfaction of UNOPS.
2. Any parts, components, adapters, software, hardware etc, that are NOT mentioned in the technical requirements or technical offer, but required to put the equipment into fully operational condition shall be deemed part of the awarded medical equipment and must be provided by the Supplier at no additional cost.
3. All electrically operated equipment must be designed to run on the standard AC power (voltages and frequencies) in Iraq. Equipment operated at 110V (with and without transformers) shall NOT be acceptable.
3. Pre-installation requirements:1. All medical equipment, or its component, that will be permanently built-in or mounted on floor, wall
or ceiling shall include all needed fixtures, supports, arms, mounting parts/interfaces, finishing seals, and howsoever required to mount the unit and complete the installation.
2. All ceiling suspended equipment must include the design, supply and installation of the interface steel structure between the false-ceiling and concrete ceiling.
4. Packaging, Shipping, Storage and Delivery:1. The equipment package shall be well labeled, with instructions for handling, lifting, etc. The equipment
package shall be labeled with the Supplier name, Manufacturer, model number, and date of manufacture.
2. The equipment shall be packaged in a way to withstand handling, loading, unloading, temperature, humidity and other extremes likely to be encountered during shipping and transport to Iraq.
3. The Supplier shall be responsible for shipping and delivery of the equipment within the time frame stipulated in the Invitation to Bid.
4. The supplier is responsible for delivering the medical equipment to the specific locations as mentioned in the Invitation To Bid. The Supplier is responsible for loading, unloading, rigging and inside delivery of the medical equipment to its final destination room inside the building.
5. Installation 1. The Supplier shall assemble, mount, install, configure, calibrate, test and commission the medical
equipment as per published manufacturer’s instructions, applicable international & local standards, to the satisfaction of UNOPS.
2. Any materials or work found to be defective, not in conformity to the requirements herein, or damaged shall be removed immediately, and new materials or work substituted without delay.
6. Installation inspection
48
UNOPS eSourcing v2017.1
1. Installation Inspection shall demonstrate proper and safe installation and operation of the medical equipment as per the published manufacturer’s specifications, applicable standards, and to the satisfaction of UNOPS. Whenever deemed necessary by UNOPS, the Supplier shall provide calibrated testing equipment, analyzers etc to verify proper function/performance of the equipment as per the published manufacturer’s specifications.
2. The Supplier shall provide 2 original user manuals and 2 original technical service manuals. Soft copy of user and service manuals (on CD) shall be also provided. Technical service manuals shall include spare parts lists, electronic circuits schematic diagrams, and detailed troubleshooting guides (where applicable).
7. Warranty and Maintenance:1. The Supplier shall provide full warranty, for the period stipulated in the Invitation to Bid. The warranty
shall cover free maintenance/labor and free spare parts throughout the warranty period.
2. All maintenance and services must be provided by qualified and certified staff.
3. The Supplier shall conduct scheduled Preventive Maintenance (PM) according to the manufacturer recommendations and applicable standards.
4. The Supplier shall fix malfunctioning equipment within a maximum of 4 days from the date of notification.
5. The Supplier shall replace or repair all defective equipment and software, and shall correct any defects -without charges for parts or labor- both during and after regular working hours, during the warranty period.
6. The Supplier shall provide -without charges for parts or labor- an equivalent replacement of any defective part that cannot be repaired or corrected to the satisfaction of UNOPS/MOH during the warranty period.
7. The Supplier must guarantee an uptime of 95% calculated yearly during warranty, unless otherwise requested by MOH to follow current protocols applied by MOH.
8. All warranties and rights shall be transferrable from UNOPS to the Ministry Of Health (MOH) upon transfer of ownership, the date of which shall be agreed between UNOPS and the MOH.
Delivery requirements –– Comparative Data Table
UNOPS RequirementsIs quotation
compliant? Bidder to complete
Details Bidder to complete
Delivery timeBidder shall deliver the goods 4-6 months after Contract signature.
☐ Yes ☐ No Insert details
Delivery place and Incoterms rules
DAP Incoterms rules as per Incoterms 2010.as per Annex I distribution plan
☐ Yes ☐ No Insert details
Consignee details TBC ☐ Yes ☐ No Insert details
UNOPS Right to vary requirements
At the time the Contract is awarded, UNOPS reserves the right to vary the quantity of the goods and associated services specified above, provided this does not exceed
☐ Yes ☐ No Insert details
49
UNOPS eSourcing v2017.1
+/- 35%, without any change in the unit prices or other terms and conditions of the RFQ.
00ax: +45 45 33 75 01
The offered goods and related services (if applicable) are in accordance with the required specifications and requirements specified in Section II: Schedule of Requirements.
☐ Yes ☐ No
ANY DEVIATION MUST BE LISTED BELOW:_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Name : _____________________________________________________________
Title : _____________________________________________________________
Date : _____________________________________________________________
Signature : _____________________________________________________________
50
UNOPS eSourcing v2017.1
Form D: Previous Experience Form
RFQ reference no: [insert RFQ reference No.]Name of Bidder: [insert name of Bidder]
Description of services/goods Country
Total amount of Contract
Contract Identification and Title andContact details of Client
(Name, Address, telephone, email, fax)
Year project
was undertaken
Name : _____________________________________________________________
Title : _____________________________________________________________
Date : _____________________________________________________________
Signature : _____________________________________________________________
51