Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small...

6
Forever Wave USA Flag w/ Small Black Sleeve (87-18 Wrangler YJ, TJ, JK & JL w/o Roll Bar Padding) Installation Time: 30 Minutes Tools Required: None Installation Instructions: 1. Before

Transcript of Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small...

Page 1: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

Forever Wave USA Flag w/ Small Black Sleeve (87-18 Wrangler YJ, TJ, JK & JL w/o Roll Bar

Padding)

Installation Time: 30 Minutes

Tools Required:

✓ None

Installation Instructions:

1. Before

Page 2: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage

3. Start the zipper. This will be a tight fit.

Page 3: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

4. Pull the zipper down

5. Close the Velcro flap

Page 4: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

6. Line up the flag zippe with the rear of the Jeep

Page 5: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

7. Start the zipper

8. Pull the zipper down

Page 6: Forever Wave USA Flag w/ Small Black Sleeve (87-18 ......2. Wrap the Forever Wave USA Flag w/ Small Black Sleeve around the roll cage 3. Start the zipper. This will be a tight fit.

9. Installation complete

Installation Instructions Written by ExtremeTerrain Customer T. Boyer 3/20/2018