Forest Hill elmwood fine custom cabinetry … Hill elmwood fine custom cabinetry 06/27/2016 1:02 PM...
Transcript of Forest Hill elmwood fine custom cabinetry … Hill elmwood fine custom cabinetry 06/27/2016 1:02 PM...
06/27/2016 1:02 PMForest Hill elmwood fine custom cabinetry
Possible Rail Widths
2.25”2.5”
2.75” 3”3.25”3.5”
3.75” 4”4.25”4.5”2”
2.25”2.25”2.5”2.5”
2.75”2.75” 3”3”3.25”3.25”3.5”3.5”
3.75”3.75” 4”4”4.25”4.25”4.5”4.5”
4.75” 5”5.25”5.5”
5.75” 6”
This slider indicates the range of possible rail widths we offer with this door style. The arrow above highlights the Prime Rail Width for this door style.
234"
2316" 9
16"
1316" "N" EDGE
Prim
e Door
Rails &
Stiles
2"
916"
"N" EDGE
1316"5
8"
1316"
Reduced
D
rawer R
ails
scroll for more information
Intermediate
Cross R
ail
Door Construction: • 5 Piece Wood Mortise & Tenon door.
Center Panel Construction: • 3/8” thick veneer center panel.• See drawings for other available options.
Rail/Stile Size Options:• Default/Prime Rail & Stile is 2 3/4”W.• Minimum Rail is 2 1/4”W with Concealed Hinges. • Minimum Rail /Stile is 1 1/2”W without hinges.• Maximum Rail/Stile is 4 1/2”W, but this becomes a function of cabinet width.• Frameless Drawer fronts: Minimum Stile width is 2”W for proper drawer box
attachment.• Inset Frame Drawer fronts: Minimum Stile width is 1 1/2”W for proper drawer
box attachment.
Minimum HINGED Door Size:• Based on Prime Rail/Stile Width and Prime Panel: 7”W x 7”H.• We often get the question: “Your drawer fronts are 5 7/8”H, why isn’t the mini-
mum door width 5 7/8”W?”. If we were to use a drawer front turned to become a door, the rails and stiles would be reversed and beside a standard door, this would look odd, especially with a stained finish.
• Hinged doors smaller than the listed minimum width will be manufactured with slab doors.
Minimum PULL OUT Door Size:• Based on 2”W Stiles and a Prime Panel: 5 1/2”W x 5 1/2”H.• As the width of the door decreases, the stiles will remain full size until the
center panel reaches 1 1/2”W, at that point the stile width will decrease until it reaches the minimum of 2”.
Maximum Door Size:• 24”W x 48”H• Wider/Taller doors will have intermediate cross rail and multiple panels. Cross
Rails can be removed, however this voids the warranty.
Radius Doors Available:• No.
3 Dimensional Mitered Doors Available:• Yes.
Wainscot/Appliance Panel Types:• Standard rails & panels. Dimensioned drawing showing the number of panels
and location of cross rails is required. Maximum size: 96”W x 48”H.
Wainscot Arch & Arched Top Door Availability:• Yes.
Recessed Filler/Pilaster Availability:• Yes.
General Specifications
Edge Type Availability
1/4” Veneer Panel
Prime Center Panel
3/8” Veneer Panel
Solid R
everse Panel
Additional Flat Panel Options
Available Raised Panel OptionsTo determine Minimum Door Width Dimension use this Formula: (Rail Width x 2) + (Panel Raise Dimension x 2) + 0.625
Baron Panel
Essex Panel Geneva Panel
Malibu Panel
Savannah Panel
Imperial Panel
Roxborough Panel
54 Panel
Effingham Panel
Princeton Panel
214"
Camden Panel
06/27/2016 1:02 PMForest Hill elmwood fine custom cabinetry
Possible Rail Widths
2.25”2.5”
2.75” 3”3.25”3.5”
3.75” 4”4.25”4.5”2”
2.25”2.25”2.5”2.5”
2.75”2.75” 3”3”3.25”3.25”3.5”3.5”
3.75”3.75” 4”4”4.25”4.25”4.5”4.5”
4.75” 5”5.25”5.5”
5.75” 6”
This slider indicates the range of possible rail widths we offer with this door style. The arrow above highlights the Prime Rail Width for this door style.
234"
2316" 9
16"
1316" "N" EDGE
Prim
e Door
Rails &
Stiles
2"
916"
"N" EDGE
1316"5
8"
1316"
Reduced
D
rawer R
ails
scroll for more information
Intermediate
Cross R
ail
Drawer Front Options
Solid Flat Slab Drawer Front
5/4 Raised Slab Drawer Front
134"
French Country Drawer Front: • Available for top drawers in Full Access Frameless lines
only. • 1 1/2” Thick.
578"
Tuscan Arched Drawer Front: • Available for top drawers in Full Access Frameless lines
only. • 1 1/4” Thick.
578"
118"
3/8” Slab with Applied EK115 Moulding• Recommended for Inset Frame only.
• Drawer Front Ordering Methodology: As the drawer front height increases beyond the default top drawer height (which is different for each cabinet line), the drawer rails will increase in size until the full rail width is attained. The center panel will remain the same until the rails have reached full width. At this point the center panel will begin to increase along with the drawer height.
• The information below is based on the prime door rail width of 2 3/4”. The dimensions shown WILL change if a rail size other than 2 3/4” is selected. The following information is also representative of the prime configuration of rails, stiles and center panel as shown on the left side of this page.
Full Access Frameless
Classification Drawer Front Height (DH) Rail Widths Space for Hardware
Top Drawer Less than 5.875”H Slab Only DH - (2 x outside edge profile)
Top Drawer (Recessed) 5.875”H 2”W 1.875”H
Lower Drawer (Recessed) 6”H - 7.25”H ( DH - 1.875 ) / 2 1.875”H
Lower Drawer (Recessed) 7.375”H + 2.75”W DH - 5.5
Inset Frame
Classification Drawer Front Height (DH) Rail Widths Space for Hardware
Top Drawer Less than 5.4375”H Slab Only DH - (2 x outside edge profile)
Top Drawer (Recessed) 5.4375”H 2”W 1.4375”H
Lower Drawer (Recessed) 5.5625”H - 6.8125”H ( DH - 1.4375 ) / 2 1.4375”H
Lower Drawer (Recessed) 6.9375”H + 2.75”W DH - 5.5
Full Overlay Frame
Classification Drawer Front Height (DH) Rail Widths Space for Hardware
Top Drawer Less than 6.5”H Slab Only DH - (2 x outside edge profile)
Top Drawer (Recessed) 6.5”H 2”W 2.5”H
Lower Drawer (Recessed) 6.625”H - 7.875”H ( DH - 2.5 ) / 2 2.5”H
Lower Drawer (Recessed) 8”H + 2.75”W DH - 5.5
Standard Door Match Drawer Front Specifications
Considerations• DH = Drawer Height• The minimum flat space (for hardware) that we allow on a drawer front is 5/8”.• The default top drawer height is a cabinet line dependent value that we base all other drawer fronts on.
Recessed Veneer Door Match (Most Common) • Vertical stiles will be full size.• See chart for top & bottom rail sizes as well as space
for hardware, according to drawer front height.
DH
Recessed Veneer Door Match with 2” Rails & Stiles• Designed for Inset Frame Cabinets ONLY.
DH
1/2” Slab with Applied Alexandria Moulding (M111)• Recommended for Inset Frame only.
58"
06/27/2016 1:02 PMForest Hill elmwood fine custom cabinetry
Possible Rail Widths
2.25”2.5”
2.75” 3”3.25”3.5”
3.75” 4”4.25”4.5”2”
2.25”2.25”2.5”2.5”
2.75”2.75” 3”3”3.25”3.25”3.5”3.5”
3.75”3.75” 4”4”4.25”4.25”4.5”4.5”
4.75” 5”5.25”5.5”
5.75” 6”
This slider indicates the range of possible rail widths we offer with this door style. The arrow above highlights the Prime Rail Width for this door style.
234"
2316" 9
16"
1316" "N" EDGE
Prim
e Door
Rails &
Stiles
2"
916"
"N" EDGE
1316"5
8"
1316"
Reduced
D
rawer R
ails
scroll for more information
Intermediate
Cross R
ail
Mullion Profile:
Mullion AvailabilityConsiderations• Most mullion styles have suggested ratios for width and height in order to maintain proper proportions for the de-
sign. Please refer to the mullion door specifications for these suggested sizes.
1LiteM
ullion
2Lite Mullion
2P1Lite Mullion
4LiteM
ullion
2P4Lite Mullion
6Lite Mullion
8Lite Mullion
9Lite Mullion
8Lite Mullion
(Wide Rail)
10Lite Mullion
12Lite Mullion
12Lite Mullion
(Wide Rail)
5LitePortholeM
ullion
2P5LitePorthole M
ullion
9LitePortholeM
ullion
5LiteSym
phonyM
ullion
2P5LiteSym
phony Mullion
2P9LitePorthole M
ullion
4LiteAC-4
C Mullion
QuarterArch M
ullion
2P3LiteAC-4
Harm
onyG
lass 3Lite
7LiteH
elix Mullion
5LiteUnitas M
ullion
10LiteG
othic Arch
11LiteEllipse M
ullion
12LiteG
othic DBLARCH
2LiteChalice
7 LiteSym
phony Mullion
10 LiteSym
phony Mullion
13 LiteSym
phony Mullion
2P2LiteChalice
2P4LiteChalice
06/27/2016 1:02 PMForest Hill elmwood fine custom cabinetry
Possible Rail Widths
2.25”2.5”
2.75” 3”3.25”3.5”
3.75” 4”4.25”4.5”2”
2.25”2.25”2.5”2.5”
2.75”2.75” 3”3”3.25”3.25”3.5”3.5”
3.75”3.75” 4”4”4.25”4.25”4.5”4.5”
4.75” 5”5.25”5.5”
5.75” 6”
This slider indicates the range of possible rail widths we offer with this door style. The arrow above highlights the Prime Rail Width for this door style.
234"
2316" 9
16"
1316" "N" EDGE
Prim
e Door
Rails &
Stiles
2"
916"
"N" EDGE
1316"5
8"
1316"
Reduced
D
rawer R
ails
scroll for more information
Intermediate
Cross R
ail
Mullion Profile:
Mullion AvailabilityConsiderations• Most mullion styles have suggested ratios for width and height in order to maintain proper proportions for the de-
sign. Please refer to the mullion door specifications for these suggested sizes.
6LiteH
ourglass Mullion
4LiteRosedale
Mullion
8Lite Rosedale Mullion
12LiteH
ourglass Mullion
16LiteH
ourglass Mullion
4Lite X Mullion
2 Panel 4 Lite X Mullion
8Lite X Mullion
4Lite X Mullion
Rectangular
2 Panel 4 Lite X Mullion
Rectangular
12Lite Rosedale Mullion
12Lite X Mullion
16Lite X Mullion
8Lite X Mullion
Rectangular
12Lite X Mullion
Rectangular
16Lite X Mullion
Rectangular
06/27/2016 1:02 PMForest Hill elmwood fine custom cabinetry
Possible Rail Widths
2.25”2.5”
2.75” 3”3.25”3.5”
3.75” 4”4.25”4.5”2”
2.25”2.25”2.5”2.5”
2.75”2.75” 3”3”3.25”3.25”3.5”3.5”
3.75”3.75” 4”4”4.25”4.25”4.5”4.5”
4.75” 5”5.25”5.5”
5.75” 6”
This slider indicates the range of possible rail widths we offer with this door style. The arrow above highlights the Prime Rail Width for this door style.
234"
2316" 9
16"
1316" "N" EDGE
Prim
e Door
Rails &
Stiles
2"
916"
"N" EDGE
1316"5
8"
1316"
Reduced
D
rawer R
ailsInterm
ediate C
ross Rail
• The standard finish for the back of all doors and drawer fronts is base stain without shader or glaze or base paint without glaze. An additional charge will apply to finish the backs of the doors and drawers exactly like the fronts.
• Elmwood highly recommends using the “1/16 Radius edge” in place of “Square edge” when a painted finish is required, as this edge will mini-mize edge chipping.
• Painted wood doors will develop hairline fractures at joints on rails and stiles as well as rails and center panels. THIS IS NOT A WARRANTY ISSUE.
• 5 Piece MDF doors will telegraph the joint location between the stile and rail. There will be open gaps at the joint between the panel and the rail. As a result, surface hairline fractures may develop at the joints. THIS IS NOT A WARRANTY ISSUE.
• Veneer center panels will absorb stain differently than solid rails and stiles which may affect the overall appearance of the finished door. Natural fin-ishes also contain this characteristic.
• Glazed finishes appear different on different doors styles, different outside edge profiles as well as on different wood species.
• It is required that a sample door is viewed before the cabinetry order is placed.
Finish Considerations
All door style factors listed below are based on the Prime Rail/Stile Width and Center Panel Configuration for this door style as shown on the left side of this page. Any changes to the prime door style, included rail/stile width changes, panel changes, etc. will result in changes to the door style factor (DSF) and price point (P.P.).
Door Style Factors for Available Species
Legend:N/A - Species not available for this door style.
• - Species is available (by request). Pricing not yet established.
Species DSF 20/20 Species DSF 20/20Alder - Clear 1.70 11 Oak - Quarter Cut White (Solid Reverse) 1.77 12
Alder - Knotty (Solid Reverse) 1.63 10 Oak - Rift Cut Red 1.70 11
Aqua Gloss N/A N/A Oak - Rift Cut White 1.84 13
Ash - Quarter Cut White N/A N/A Oak - Textured Quarter Cut White N/A N/A
Bamboo (Caramel, Natural Light) N/A N/A Oak - Textured Rift Cut Red N/A N/A
Cherry - Flat Cut 1.70 11 Oak - Textured Rift Cut White N/A N/A
Cherry - Knotty N/A N/A Paint Grade 1.56 9
Cherry - Quarter Cut N/A N/A PET (High Gloss, Ultra Matte) N/A N/A
Cypress - Select Grade N/A N/A Pine (Clear, Knotty) N/A N/A
European Steamed Beech (Flat Cut, Quarter Cut) N/A N/A Quarter Cut Black Limba N/A N/A
Hickory - Flat Cut N/A N/A Red Birch N/A N/A
High Pressure Laminate N/A N/A Sapele - Ribbon Cut N/A N/A
Mahogany (Khaya) 1.77 12 Stainless Steel N/A N/A
Maple - Flat Cut 1.63 10 Teak (Flat Cut, Quarter Cut) N/A N/A
Maple - Quarter Cut N/A N/A Tineo N/A N/A
MDF - 1 Piece N/A N/A Veneer - Textured Faux Wood N/A N/A
MDF - 5 Piece 1.56 9 Vision Series Veneers N/A N/A
Melamine N/A N/A Vista Series Veneers N/A N/A
Oak - Flat Cut Red 1.63 10 Walnut 1.91 14
Oak - Flat Cut White (Solid Reverse) l l Walnut - Quarter Cut N/A N/A
Oak - Quarter Cut Red N/A N/A