FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION ... · 09211 2 SIDED.doc Rev: 0 FORD...

2
09211 2 SIDED.doc Rev: 0 FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION INSTRUCTIONS Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. NOTE: The Gear Box will not work with the rear under-seat subwoofer. PACKAGE CONTENTS Gear Box – Part No: 09211 (1) Safety Strap with Strap Lock (1) Dividers (2) Installation Instructions (1) INSTRUCTIONS 1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and remove the jack tools (Figures 1 and 2). Figure 1 Figure 2 3) Install the safety strap through the drivers-side slot from the top to the bottom (Figure 3). 4) Continue strap installation through opening on back-side of seat support and up through bottom of passenger- side slot. (Figure 4).

Transcript of FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION ... · 09211 2 SIDED.doc Rev: 0 FORD...

Page 1: FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION ... · 09211 2 SIDED.doc Rev: 0 FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION INSTRUCTIONS Congratulations on your

09211 2 SIDED.doc

Rev: 0

FORD F250-F450 SUPERCAB – PART NO. 09211

INSTALLATION INSTRUCTIONS Congratulations on your purchase of the Husky Gear Box. The Gear Box was designed to fit under the rear seat of your truck or SUV. The Gear Box gives you a place to store loose items and clutter and ultimately help keep your vehicle organized. It’s designed to fit your vehicle with or without your Husky Liners in place and only takes a few minutes to install. NOTE: The Gear Box will not work with the rear under-seat subwoofer. PACKAGE CONTENTS Gear Box – Part No: 09211 (1) Safety Strap with Strap Lock (1) Dividers (2) Installation Instructions (1) INSTRUCTIONS

1) Open and remove the Gear Box from the shipping box and protective plastic bag. 2) Lift the rear seats into the upright position and remove the jack tools (Figures 1 and 2).

Figure 1 Figure 2

3) Install the safety strap through the drivers-side slot from the top to the bottom (Figure 3). 4) Continue strap installation through opening on back-side of seat support and up through bottom of passenger-

side slot. (Figure 4).

Page 2: FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION ... · 09211 2 SIDED.doc Rev: 0 FORD F250-F450 SUPERCAB – PART NO. 09211 INSTALLATION INSTRUCTIONS Congratulations on your

09211 2 SIDED.doc

Rev: 0

Figure 3 Figure 4 5) Position Gear Box, feed the strap through the strap lock, pull strap tight and fasten (Figure 5). 6) Install the 2 dividers and you are ready to organize (Figure 6).

Figure 5 Figure 6

If you are storing long items it may be necessary to remove the dividers. Also, small loose items can potentially roll around and become somewhat annoying. Simply place these items in a rag, towel, etc… roll them up and place in the Gear Box. If you have questions about your installation or any other Husky product, please call us at: 1-800-344-8759 M-F 8:00 am to 5:00 pm Central Time.