For Quality, Reliability And Servicespancontrols.co.in/wp-content/uploads/2013/08/Span... ·...

SPAN CONTROLSFor Quality, Reliability And Service

Span Controls

Established in 1987, Span Controls is now

one of the leading manufacturers of Switch

Mode Power Supplies, Battery Chargers, DC-DC

Converters and LED Drivers in India. Having

more than 25 years of experience in the same

we offer our customers the widest range of

products complimented by unmatched quality

and timely deliveries.

Span Controls has been supplying power

supplies & converters to public as well as

private sector companies manufacturing

telecommunication products, data acquisition

systems, Weighing scales, Gensets, Medical

electronics etc. for quite a long time. Also it has

entered the Lighting industry with its newest

and latest range of LED Drivers.

With a total strength of more than 50 skilled

employees and manufacturing facility of more

than 3000 sq.ft. equipped with tools of latest

technology we assure you our best deliveries

and volume quantity production that shall

definitely help fulfil all your power supply,

chargers and LED drivers requirement on a long

term basis.

Features– Wide Input Range – Built-in EMI Filter– Low Output Ripple – Cooling by free air convection– 100% full load burn-in test – 1 year warranty

* Specifications are subjected to change without prior notice

< 40Amps

> 80%

< 40Amps

> 80%

< 40Amps

170-270VAC 50/60Hz

> 80%

150-270VAC 50/60Hz

480W

20A

24Vdc ± 1V

24VDC/20A

240W

10A

24Vdc ± 1V

24VDC/10A

120W

5A

24Vdc ± 1V

24VDC/5A

MOV Protection

27Vdc (Auto-Recovery)

115 -135% of rated o/p voltage

Yes(Auto Recovery)

i/p to o/p >2KV RMS

i/p to PE > 1.5KV RMS

o/p to PE > 0.5KV RMS

0°C to 70°C

P/7.5mm GMKDS7

230 x 165 x 85mm

7P/5.08mm MKDS

196 x 135 x 60mm

7P/5.08mm MKDS

163 x 95 x 60mm

5P/5.08mm MKDS

123 x 80 x 50mm

Panel / Din-Rail

< 40Amps

> 80%

90-270VAC 50/60Hz

< 1%

48W

2A

24Vdc ± 1V

24VDC/2A

Physical Parameters

Mounting

Dimensions

Connection

Enviornmental Operation Temperature

Isolation

Protection

Short Circuit Protection

Over Load Protection

Over Voltage Protection

Surge Voltage Protection

Input

Inrush Current

Efficiency

Input Voltage Range

Output

Ripple(Pk-Pk, BW 20Mhz)

Line and Load Regulation

Typical Output Power

Output Current

Output Voltage

Part Number

-

-

-

%1

Technical Parameters

Automation SMPS

24 VDC @ 2A

24 VDC @ 5A

24 VDC @ 10A

24 VDC @ 20A


Battery Chargers

Features– Wide Input Range, – Built-in EMI Filter– Automatic selection of Float & Boost– 100% full load burn-in test– Overload & Battery reverse Protection– 1 year warranty


PanelPanel / Din-Rail

230 x 130 x 100mm230 x 130 x 100mm150 x 110 x 90mm164 x 106 x 60mm

Combicon Connectors

Constant Voltage

Float, Boost, Battery Reverse, Mains On

Float to Boost Automatic changeover (CV/CC)

2KV RMS

NoYes

Yes

> 80%> 80%> 80%> 80%

170-280VAC 50/60Hz

1%

20Amps

27.6Vdc

BC-24V20

15Amps

27.6Vdc

BC-24V15

10Amps

13.8Vdc

BC-12V10

0°C to 70°C

6Amps

13.8Vdc

BC-12V6

Physical Parameters

Enviornmental

Protection

Input

Output


Misc

150-270VAC 50/60Hz

Yes

Part Number

Output Voltage

Output Current

Line and Load Regulation

Input Voltage Range

Efficiency

Short Circuit Protection

Battery Reverse

Over Temperature

Isolation

Charge Mode Control

Indications

End Of Charging

Connection

Dimensions

Mounting

Operation Temperature


BC - 12 V 6 BC - 24 V 24

BC - 12 V 10 BC - 24 V 24

Power Pack


Features– Automatic Changeover on Battery– Wide AC input range– In-built 12V 7Ah SMF Battery – >20 minutes Battery Back-up – Protections : Short Circuit & Over load– Cooling by free air convection– 100% full load Burn in– 1 Year warranty

Misc.

Protections

Input

Output

6 Pin open type Terminal Strip

325 x 135 x 170mm ; panel mounting

Output shuts down at Battery voltage 10.5VDC

Constant Current with Auto Recovery

Over voltage Cut Off= 290VAC ±10VAC and Recovery 280VAC ±10VAC

after cut-off, o/p automatically changes over to battery

Under voltage Cut Off= 150VAC ±10VAC and Recovery 160VAC

±10VAC after cut-off, o/p automatically changes over to battery

Cold Start 30Amps (Max) / 230VAC

100W

0 - 55°C

> 80%

1Amp / 230VAC

165-300 VAC 45-65Hz

< 1% of Output Voltage

< ± 1%

< ± 0.2%

0.9 Amps3.33 Amps

110Vdc30Vdc

SCP-110-100SCP-30-100

4.16 Amps

24Vdc

SCP-24-100

Connectivity

Dimensions

Working Temperature

Battery Low

Over Load

I/P Over Voltage Cut-off

I/P Under Voltage Cut-off

Typical Output Power

Output Current

Output Voltage

Part Number

Line Regulation

Load Regulation

Ripple & Noise (Max)

Input Voltage Range

AC Current

In-rush current

Efficiency

Auto Changeover



SCP-24-100SCP-30-100SCP-110-100


Sr. No. 15/8, Unit No. 9, Kruti Industrial Estate,

Opp. Sangam Press, Kothrud, Pune - 38.

Tel. : +91 - 20 - 2544 4473, 2542 4829, Fax : +91 - 20 - 2546 0272

E-mail : [email protected] / [email protected]

www.spancontrols.co.in

For Quality, Reliability And Servicespancontrols.co.in/wp-content/uploads/2013/08/Span... ·...

Documents

Transcript of For Quality, Reliability And Servicespancontrols.co.in/wp-content/uploads/2013/08/Span... ·...