for emample mmmmmmm universal 9AE trunking...

804

for e ample for e ample for e ample

805

Red catalogue numbers: New products

universal trunkingbodies, nishing accessories and mounting wiring accessories

TRUNKING TRUNKING AND ACCESSORIES ANGLES FLAT JUNCTION(3) Angled junction

Number of compartments

Covers width (mm)

Size (mm)

Body and covers complete

Separation Clips Base joints(1)

Cover joints

End cap Internal angle(2) 85 to 95°

External angle(2) 60 to 120°

Flat angle To width 80 mm

To width 105 mm

UNIVERSAL DLP TRUNKING - 65 mm COVER

1

6535 x 80 0 104 61 0 105 84 0 106 81 0 106 92 or

0 106 91 0 108 01 0 107 22 0 106 01 0 106 21 0 107 67 0 107 35 - 0 107 63 + 0 106 01

6550 x 80 0 104 62 0 105 82 0 106 81 0 106 92 or

0 106 91 0 108 01 0 107 22 0 106 02 0 106 22 0 107 67 0 107 35 - 0 107 63 + 0 106 02

6550 x 105 0 104 24 0 105 82 0 106 81 0 106 96 0 108 01 0 107 00 0 106 05 0 106 19 0 107 86 0 107 39 0 107 40 0 107 65

+ 0 106 05

2

65 6550 x 150 0 104 27 0 105 82 0 106 81 0 106 92 or

0 106 91 2 x 0 108 01 0 107 03 0 106 06 0 106 35 0 107 89 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 06

3

40 65 4050 x 170 0 104 67 0 105 82 0 106 82 0 106 92 or

0 106 912 x 0 108 00 + 0 108 01 0 107 10 0 106 50 0 106 38 0 107 98 0 107 35 0 107 36 or

0 107 370 107 63

+ 0 106 50

65 65 6550 x 220 0 104 28 0 105 82 0 106 81 0 106 92 or

0 106 91 3 x 0 108 01 0 107 05 0 106 50 0 106 38 0 107 95 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 50


1

8535 x 105 0 104 63 0 105 82 0 106 82 0 106 92 or

0 106 91 0 108 02 0 107 01 0 106 01 0 106 21 0 107 84 0 107 35 0 107 36 0 107 63 + 0 106 01

8550 x 105 0 104 64 0 105 82 0 106 82 0 106 92 or

0 106 91 0 108 02 0 107 02 0 106 02 0 106 22 0 107 85 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 02

2

85 8550 x 195 0 104 70 0 105 82 0 106 82 0 106 92 or

0 106 91 2 x 0 108 02 0 107 11 0 106 06 0 106 35 0 107 92 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 06


1

13050 x 150 0 104 65 0 105 82 0 106 86 0 106 92 or

0 106 91 0 108 04 0 107 03 0 106 02 0 106 22 0 107 89 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 02

13065 x 150 0 104 75 0 105 83 0 106 86 0 106 92 or

0 106 91 0 108 04 0 107 06 0 106 03 0 106 23 0 107 90 0 107 33 0 107 38 0 107 64 + 0 106 03


1

18050 x 195 0 104 69 0 105 82 0 106 86 0 106 92 or

0 106 91 0 108 06 0 107 11 0 106 02 0 106 22 0 107 92 0 107 35 0 107 36 or 0 107 37

0 107 63 + 0 106 02

180

65 x 195 0 104 76 0 105 83 0 106 86 0 106 92 or 0 106 91 0 108 06 0 107 07 0 106 03 0 106 23 0 107 93 0 107 33 0 107 38 0 107 64

+ 0 106 03

1: 0 106 92: base joint for aligning bases, 0 106 91: base joint, attached with adhesive 2: Internal and external angles include partition junction(s) for installation with multi-compartment trunking 3: Flat junctions Cat.Nos 0 107 37 and 0 107 40 are suitable for tap-off to a 105 mm wide profile equipped with a 65 mm cover and flat junctions Cat.No 0 107 36 and 0 107 38 are suitable for tap-off to a 105 mm wide profile equipped with a 85 mm cover

Cover width

65 mm 85 mm

Cat.Nos Cat.Nos

ARTEOR AND MOSAIC SUPPORTS(1)

2 modules 0 109 52 0 109 92

4 modules 0 109 54 0 109 94

6 modules 0 109 56 0 109 96

8 modules 0 109 58 0 109 98

MOSAIC SOCKETS OUTLETS - AUTOMATIC TERMINALS GERMAN STANDARD

Standard Red Tamperproof

2P+E, 2 modules 0 774 01 - 0 774 21

2 x 2P+E, 4 modules 0 774 02 0 774 12 0 774 22

3 x 2P+E, 6 modules 0 774 03 0 774 13 0 774 23

4 x 2P+E, 8 modules 0 774 04 - 0 774 24

MOSAIC SOCKETS OUTLETS - SCREW TERMINALS GERMAN STANDARD

Standard Red Tamperproof

2P+E, 2 modules 0 776 01 - 0 776 21

2 x 2P+E, 4 modules 0 776 02 0 776 12 0 776 22

3 x 2P+E, 6 modules 0 776 03 0 776 13 0 776 23

4 x 2P+E, 8 modules 0 776 04 - 0 776 24

UNIVERSAL SUPPORTS(2) FOR 60 mm FIXING CENTER (Galea, Valena, Suno, Cariva, Niloé)

Cover width

85 mm

1 gang 0 109 13

2 gang 0 109 23

3 gang 0 109 33

1: Supplied with finishing plate2: Supplied with the socket and its support and finishing plate

universal trunkingmounting of wiring accessories

Whitelength m

806

for example xxxxxxxxxxxxxxx


Pack Cat.Nos Universal trunking

Trunking without partition24 0 104 611 Supplied with:

- one 35 x 80 mm body- one fl exible 65 mm width coverFits onto the whole trunking includingin internal and external anglesInstallation: can be used with Mosaic/Arteor ranges or DIN rail equipmentLength 2 m

Partition16 0 105 841 Self-adhesive separation partition

Length 2 m

Joints20 0 106 91 Body joint

For aligning bases during installation20 0 106 92 Body joint, attached with adhesive

(fi t at the end of installation)10 0 108 01 Cover joint for 65 mm cover

Angles and end capInternal and external bendsInclude the 2 components for the top andbottom of the trunking on which the fl exiblecover is fi tted

10 0 106 01 Changeable internal bend, from 85° to 95°for 35 x 80 and 35 x 105 mm trunking

10 0 106 21 Changeable external bend, from 60° to 120°for 35 x 80 and 35 x 105 mm trunking

Flat angle10 0 107 67 90° fl at angle

End cap10 0 107 22 Left or right end cap

Pack Cat.Nos Junctions

Flat junction5 0 107 35 For tap-off to a 80 mm

wide profi le

Angled junction5 0 107 63 For tap-off in an internal angle to 35 x 80,

35 x 105, 50 x 80, 50 x 105For use with internal angle Cat.No 0 106 01

Accessories50 0 106 81 Clip

100 0 308 81 Base for clamp

universal DLP trunking x - mm covertrunking and ttings

Wiring accessories supports and installation accessories (p. 819 to 821)

Flat junctionCat.No 0 107 35Changeable

internal angleCat.No 0 106 01

Changeablefl at angle

Cat.No 0 107 67

Changeable external angle

Cat.No 0 106 21

Cat.Nos for x trunking

Whitelength: m

ArteorMosaic

Compatible ranges

Selection chart p. 804-805Wiring capacity chart p. 803

1: Number of metres in pack

80

65

35

807







Partition24 0 105 821 Separation partition

Length 2 m





10 0 106 02 Changeable internal bend, from 85° to 95°for 50 x 80/50 x 105/50 x 150 and50 x 195 mm trunkings

10 0 106 22 Changeable external bend, from 60° to 120°for 50 x 80/50 x 105/50 x 150 and50 x 195 mm trunkings





wide profi le






80

65

50




Cat.No 0 107 67


Cat.No 0 106 22


Whitelength: m

ArteorMosaic

Compatible ranges


808




wide profi le

5 0 107 40 For tap-off to a 150 mmwide profi le

Angled junction

5 0 107 65 For tap-off in an internal angle to 35 x 80,35 x 105, 50 x 80, 50 x 105For use with internal angle Cat.No 0 106 02




Whitelength: m

Changeable internal angle

Cat.No 0 106 05


Cat.No 0 107 86


Cat.No 0 106 19


Flat junctionCat.No 0 107 40

ArteorMosaic

Compatible ranges





Length 2 m


For aligning bases during installation

10 0 108 01 Cover joint for 65 mm cover


10 0 106 05 Changeable internal bend, from 85° to 95°for 50 x 105 mm trunkings

10 0 106 19 Changeable external bend, from 60° to 120°for 50 x 105 mm trunkings



65

105

50




809

for example xxxxxxxxxxxxxxxuniversal DLP trunking x - mm covertrunking and ttings

Whitelength: m




Cat.No 0 107 89


Cat.No 0 106 35


ArteorMosaic

Compatible ranges


Trunking with partition12 0 104 271 Supplied with:



Length 2 m



20 0 106 92 Body joint, attached with adhesive(fi t at the end of installation)


Angles and end capInternal and external bendsInclude the 3 components making the angle (parts for the top and bottom and the partition junction) on which the fl exible cover is fi tted

5 0 106 06 Changeable internal bend, from 85° to 95°for 50 x 150 and 50 x 195 mm trunkings

5 0 106 35 Changeable external bend, from 60° to 120°for 50 x 150 and 50 x 195 mm trunkings




Flat junctions5 0 107 35 For tap-off to a 80 mm

wide profi le

5 0 107 37 For tap-off to a 105 mmwide profi le equipped with a 65 mm cover






65 65

150

50




810

for example xxxxxxxxxxxxxxxuniversal DLP trunking x - mm covertrunking and ttings

Whitelength: m




Cat.No 0 106 50


Cat.No 0 106 38


Cat.No 0 107 98

ArteorMosaic

Compatible ranges




- one 50 x 170 mm body- one fl exible 65 mm width cover and two fl exible 40 mm width coversFits onto the whole trunking includinginternal and external anglesInstallation: can be used with Mosaic/Arteor rangesor DIN rail equipmentLength 2 m


Length 2 m




10 0 108 01 Cover joint for 65 mm cover10 0 108 00 Cover joint for 40 mm cover

Angles and end capInternal and external bendsInclude the 4 components making the angle (parts for the top and bottom and the 2 partition junctions) on which the fl exible cover is fi tted







wide profi le





Accessories50 0 106 82 Clip for 40, 65 and 85 mm covers



Wiring accessories supports and installation accessories (p. 819-821)

40 65

170

40

50

811






Whitelength: m




Cat.No 0 106 50


Cat.No 0 106 38


Cat.No 0 107 95

ArteorMosaic

Compatible ranges



- one 50 x 220 mm body- three fl exible 65 mm width coversFits onto the whole trunking includinginternal and external anglesInstallation: can be used with Mosaic/Arteor ranges or DIN rail equipmentLength 2 m


Length 2 m





Angles and end capInternal and external bendsInclude the 4 components making the angle (parts for the top and bottom and the 2 partition junctions) on which the fl exible cover is fi tted







wide profi le








65 65

220

65

50

812







Length 2 m



(fi t at the end of installation)

10 0 108 02 Cover joint


10 0 106 01 Changeable internal bend, from 85° to 95°for 35 x 80 and 35 x 105 mm trunking

10 0 106 21 Changeable external bend, from 60° to 120°for 35 x 80 and 35 x 105 mm trunking


End cap20 0 107 01 For 35 x 105 mm trunking



wide profi le









Cat.No 0 106 01Changeablefl at angle

Cat.No 0 107 84


Cat.No 0 106 21


Whitelength: m

Compatible with all wiring accessory ranges: Arteor, Mosaic, Galea Life, Valena, Suno, Cariva, Niloe, Kaptika, Synergy, Mallia, Belanko




85

105

35

813






Length 2 m








Flat angle90° angle

10 0 107 85 For 50 x 105 mm trunking

End cap20 0 107 02 For 50 x 105 mm trunking



wide profi le










Cat.No 0 106 02Changeablefl at angle

Cat.No 0 107 85


Cat.No 0 106 22


Whitelength: m





85

105

50

814




Whitelength: m






- one 50 x 195 mm body– two fl exible 85 mm width coversFits onto the whole trunking includingin internal and external anglesInstallation: can be used with Mosaic/Arteor ranges or DIN rail equipmentLength 2 m


Length 2 m





Angles and end capInternal and external bendsInclude the 3 components making the angle (parts for the top and bottom and the partition junction) on which the fl exible cover is fi tted







wide profi le










Cat.No 0 107 92


Cat.No 0 106 06


Cat.No 0 106 35


85

195

85

50

815






Length 2 m












wide profi le




35 x 105, 50 x 80, 50 x 105For use with internal angles Cat.No 0 106 02

Accessories50 0 106 86 Clip for 130 and 180 mm covers




Whitelength: m

Compatible with the following wiring accessory ranges: Arteor, Mosaic, Galea Life, Valena, Suno, Cariva, Niloe, Kaptika


Wiring accessories supports and installation accessories (p. 819 to 821) Mosaic (p. 866-867) Arteor (p. 396-397) sockets


130

150

50


internal angleCat.No 0 106 02Changeable

fl at angleCat.No 0 107 89


Cat.No 0 106 22

816






Partition48 0 105 831 Separation partition for 65 mm depth

length 2 m





10 0 106 03 Changeable internal bend, from 85° to 95°for 65 x 105/65 x 150 and 65 x 195 mm trunking

10 0 106 23 Changeable external bend, from 60° to 120°for 65 x 105/65 x 150 and 65 x 195 mm trunking




Flat junction5 0 107 33 To tap-off to an 80 mm wide trunking

5 0 107 38 To tap-off to a 105 mm wide and 50 mm deep trunking

Angled junction5 0 107 64 To tap-off in an internal angle

to 35 x 80, 35 x 105, 50 x 80 or50 x 105 mm trunkingUsed with an internal angleCat.No 0 106 03 or 0 106 07



universal DLP trunking x - mm cover trunking and ttings

Whitelength: m







Cat.No 0 107 90


Cat.No 0 106 23

130150

65



817



Whitelength: m





Cat.No 0 107 92


Cat.No 0 106 22


Cat.No 0 106 02







Partition24 0 105 821 Separation partition length 2 m



(fi t at the end of installation)10 0 108 06 Cover joint







Flat junction5 0 107 35 For tap-off to a 80 mm wide profi le

5 0 107 37 To tap-off to a 105 mm wide profi le equipped with a 65 mm cover

5 0 107 36 To tap-off to a 105 mm wide profi le equipped with a 85 mm cover

Angled junction5 0 107 63 To tap-off in an internal angle to 35 x 80,

35 x 105, 50 x 80 or 50 x 105 mmFor use with internal angle cat.no 0 106 06



180195

50

818






Partition48 0 105 831 Separation partition for 65 mm depth

length 2 m



(fi t at the end of installation)10 0 108 06 Cover joint


10 0 106 03 Changeable internal bend, from 85° to 95°for 65 x 105/65 x 150 and 65 x 195 mm trunking

10 0 106 23 Changeable external bend, from 60° to 120°for 65 x 105/65 x 150 and 65 x 195 mm trunking




Flat junction5 0 107 33 To tap-off to an 80 mm wide

trunking

5 0 107 38 To tap-off to a 105 mm wideand 50 mm deep trunking

Angled junction5 0 107 64 To tap-off in an internal angle

to 35 x 80, 35 x 105, 50 x 80 or50 x 105 mm trunkingUsed with an internal angleCat.No 0 106 03 or 0 106 07






Cat.No 0 107 93


Whitelength: m





Cat.No 0 106 23


Cat.No 0 106 03

180195

65


819

for example xxxxxxxxxxxxxxxMosaicTM Programme socket outlets

Pack Cat.Nos Sockets for installation on DLP trunkingMosaic sockets with shutters withconnection at both sides for mountingon 65 and 85 mm cover DLP trunking inconjunction with supports and plates fortrunking (see p. 804-805)Direct connection requiring no tools,intuitive disconnection without dismantlingthe support

Standard

TTamperproof Automatic terminals - German standard

10 0 774 01 0 774 21 2P+E

10 0 774 02 0 774 22 2 x 2P+E

10 0 774 03 0 774 23 3 x 2P+E

5 0 774 04 0 774 24 4 x 2P+E

Red10 0 774 11 2P+E

10 0 774 12 2 x 2P+E

10 0 774 13 3 x 2P+E

5 0 774 14 4 x 2P+E

Mosaic socket outlet Cat.No 0 774 02 with 4 modules supportMosaic RJ 45 socket outlet with 2 modules support Cat.No 0 109 54

Mosaic socket outlet Cat.No 0 774 03 with 6 modules supportMosaic socket outlet Cat.No 0 774 23 with 4 modules support

Mosaic 2 x 4 modules support Cat.No 0 109 54 for cover width 65 mm

Pack Cat.Nos Sockets for installation on DLP trunking (continued)

Standard

TTamperproof Screw terminals - German standard

10 0 776 01 0 776 21 2P+E

10 0 776 02 0 776 22 2 x 2P+E

10 0 776 03 0 776 23 3 x 2P+E

5 0 776 04 0 776 24 4 x 2P+E

Red10 0 776 11 2P+E

10 0 776 12 2 x 2P+E

10 0 776 13 3 x 2P+E

5 0 776 14 4 x 2P+E

Tamperproof insert10 0 502 99 Tamperproof insert for socket

Fits directly into the plug


820

wiring accessories supports for DLP trunking

Pack Cat.Nos Supports for mounting Mosaic and Arteor wiring accessoriesClick-on supports which can be fitted side by sideSupplied with finishing plate

For 40 mm cover5 0 109 10 1 module

For 65 mm cover20 0 109 52 2 modules

20 0 109 54 4 modules

10 0 109 56 6 modules

10 0 109 58 8 modules


20 0 109 93 3 modules

20 0 109 94 4 modules

10 0 109 96 6 modules

10 0 109 98 8 modules

10 0 109 27 Insulation unit for 2 modules. Can be fittedtogether to create 4, 6 and 8 modulessupports

Supports for mounting Mosaic wiring accessories alongside the trunking Use 1 frame plus 1 link accessory plus 1 slide for 35 mm width trunking and add 1 spacer for 50 mm width trunkingMosaic frames. For 65, 85 and 130 mm covers

10 0 316 21 2 x 4 modules

10 0 316 22 3 x 4 modules

Pack Cat.Nos Universal supports for 60 mm fixing centres wiring accessoriesFor Galea Life, Valena, Suno, Cariva, Niloe and Kaptika

For 85 mm cover10 0 109 13 1 gang

5 0 109 23 2 gang

5 0 109 33 3 gang

For 130 mm cover5 0 109 14 1 gang

5 0 109 24 2 gang

5 0 109 34 3 gang

10 0 109 17 Insulation unit for 1 module

Mounting of Synergy, Mallia and Belanko wiring accessoriesBack boxes for mounting British standard wiring accessories on 85 mm cover

Depth 25 mm5 6 208 16 1 gang

5 6 208 26 2 gang

Depth 35 mm5 6 208 17 1 gang

5 6 208 27 2 gang

Support for mounting Hypra socket wiring accessories

5 0 109 00 For 130 mm cover

Supports for mounting Din-rail equipment wiring accessoriesFor 65 mm cover

5 0 109 25 2 modules



2 x 2 modules Mosaic support Cat.No 0 109 52 for cover 65 mm

2 modules Mosaic support Cat.No 0 109 52 for cover 65 mm

2 modules Mosaic support Cat.No 0 109 92 8 modules Mosaic support Cat.No 0 109 98

821

Pack Cat.Nos Cutting accessories for trunking

1 0 306 98 DLPlus cutting unit for PVC DLPFor cutting all plastic bodiesAvoids vibration when cutting basesand covers. AluminiumDim.: 225 x 142 x 76 mm

Insulation accessory10 0 304 18 Base joint. Adjustable wall insulation joint,

supplied in 5 m lengthsProvides continuity between the trunkingand the wall, in particular in internal angles

Fixing accessories for trunkingFor fixing all plastic profiles

Wall plugs for immediate fixingNo screws or nails required

100 0 308 98 For mini-trunking

100 0 308 99 For mini-trunking, skirting trunkingand trunking

Cartridge of Neoprene12 0 309 49 Adhesive for glue gun

DLP rapid wall plug200 0 308 97 For 10 mm min. plasterboard walls at least 20 mm

away from the concrete surfaceFor fixing DLP plastic trunking in a single operationUsed with a special tool for drill (Ø8 mm), supplied ineach pack of 200 wall plugsTensile resistance: 25 kg

Spit end cap for DLP trunking100 0 106 95 For rapid fixing of trunkings with the Spit Pulsa 700 E

(use 20 mm Spit nails)

Junction boxes for DLP trunkingFitted with current separatorCable entry possible via the bottom of the box

White junction boxes10 0 313 50 Dim.: 163 x 163 x 65 mm

(except profile height 80 mm)5 0 313 51 Dim.: 200 x 200 x 83 mm5 0 313 52 Dim.: 250 x 250 x 83 mm

VDI cable management accessoriesTo be fitted on the standard accessories (angles and junctions). For all trunking sizes except35 x 80 trunking and in compartments with40 mm width cover

5 0 107 80 Accessory for internal angle5 0 107 81 Accessory for external angle5 0 107 82 Accessory for flat angle5 0 107 83 Accessory for flat junction

accessoriesuniversal DLP trunking

0 308 990 308 98

0 309 49

0 308 97 0 106 95 0 313 50 0 308 81

Junction to floor duct Cat.No 0 107 71 + 0 106 90

Junction for change of plane Cat.No 0 107 71/72

Wall feedthrough Cat.No 0 106 98/99

Flate junctionCat.No 0 107 32

Pack Cat.Nos Junction and routing accessories

Base for Nylbloc auto terminals10 0 343 98 For up to 3 screwless connection terminals Nylbloc

auto (Cat.Nos 0 343 22/23/25/28)Direct fixing:- in top of Plexo boxes and industrial plastic cabinets≥ 130 x 130 mm- on flat bar 12 x 2 mm- in bottom of universal and aluminium DLP trunkings (from 50 x 80 mm)Screw fixing:- in bottom of Plexo boxes ≥ 105 x 105 mm andindustrial plastic cabinets- universalFixing on rail with accessory Cat.No 0 048 11 (p. 190)Accessible test socketMarking zone with felt tip pen Cat.No 0 395 98 (p. 304)

Connection strips20 0 312 10 Connection strips with 4 x 4 mm2 terminals

for junction boxes

For high current cables100 0 308 81 Base for cable ties

Flat junctionsBase junctions

10 0 107 32 To tap-off to a profile smaller than 50 x 105

5 0 107 33 To tap-off to an 80 mm width trunking

Accessories for separation partitionAllow bottom compartment cables to pass through the separation partition in case of a flat junction

5 0 107 42 For 50 mm height separation partition5 0 107 43 For 65 mm height separation partition

Junctions for change of planeTo tap-off from wall to ceiling, for example to supplypower to a luminaire

5 0 107 70 For cover 40 mm5 0 107 71 For cover 65 mm5 0 107 72 For cover 85 mm5 0 107 73 For trunking Cat.No 0 104 24

Junctions between floor duct and trunkingTo tap-off to floor duct Cat.No 0 328 00 (p. 837)

5 0 107 71+0 106 90

For cover 65 mm

5 0 107 72+0 106 90

For cover 85 mm

Wall feedthroughsProvides a finish between the trunking and the wall

5 0 106 98 For trunking 80 to 150 mm width5 0 106 99 For trunking 195 to 220 mm width

NEW

NEW


822 823

Size Number of compartments

Cover width

Cross section (mm2)

Capacity Ø maxMaximum wiring capacity (for a specific conductor type)

1.5 mm2 2.5 mm2 4 mm2 6 mm2 3 x 1.5 mm2 3 x 2.5 mm2 Cat. 6 UTP and FTP

35 x 80

Cat.No 0 104 611 compartment 65

2240 Max 33 135 100 88 65 19 14 44

690 With Mosaic and Arteor support 2 x 14 41 31 27 20 6 4 13

1030 With DIN-rail equipment support 2 x 16 62 46 40 30 9 6 20

50 x 80

Cat.No 0 104 62

1 compartment 65

3340 Max 39 202 150 131 97 29 21 66



50 x 105

Cat.No 0 104 24

1 compartment 65

4380 Max 2 x 36 265 196 172 127 38 28 87



50 x 150

Cat.No 0 104 27

2 compartments

65

3060 Max 42 185 137 120 89 27 20 61

1510 With Mosaic and Arteor support 18 91 67 59 43 13 9 30

1850 With DIN-rail equipment support 24 112 83 73 53 16 12 36

65

3060 Max 42 185 137 120 89 27 20 61



50 x 170

Cat.No 0 104 67

3 compartments

40side

2050 Max 28 124 92 80 59 18 13 40


65middle

2770 Max 42 167 124 109 80 24 18 55



40side

2050 Max 28 124 92 80 59 18 13 40


50 x 220

Cat.No 0 104 28

3 compartments

65side

3060 Max 42 185 137 120 89 27 20 61



65middle

2770 Max 42 167 124 109 80 24 18 55



65side

3060 Max 42 185 137 120 89 27 20 61



n Wiring capacity

65 mm cover universal DLP trunking

85 mm cover universal DLP trunking

130 and 180 mm cover universal DLP trunking


Cover width

Cross section (mm2)



35 x 105

Cat.No 0 104 631 compartment 85

2850 Max 33 172 128 112 83 25 18 56


590 With universal support 2 x 16 35 26 23 17 5 3 11


50 x 105

Cat.No 0 104 64

1 compartment 85

4300 Max 42 260 113 169 125 38 28 85




50 x 195

Cat.No 0 104 70

2 compartments

85

3940 Max 42 238 177 155 114 35 25 78


1280 With universal support 18 77 57 50 37 11 8 25


85

3940 Max 42 238 177 155 114 35 25 78


1280 With universal support 18 77 57 50 37 11 8 25



Cover width

Cross section (mm2)



50 x 150

Cat.No 0 104 65

1 compartment 130

6440 Max 2 x 42 390 289 254 187 57 42 128



2440 With Hypra support 2 x 25 147 109 96 71 21 15 48

50 x 195

Cat.No 0 104 69

1 compartment 180 8460 Max 3 x 42 513 380 333 246 75 55 169

65 x 150

Cat.No 0 104 75

1 compartment 130

8200 Max 2 x 55 497 368 323 238 72 53 163



4200 With Hypra support 2 x 28 254 188 165 122 37 27 83

65 x 195

Cat.No 0 104 76

1 compartment 180 11240 Max 3 x 54 681 505 443 327 99 73 224

universal trunking

Classification EN 50085-2-1 Level6.1 Void6.2 Resistance to impact for installation and application 2.0 J

6.3 Minimum storage and transport temperature - 25 °C

6.3 Minimum installation and application temperature - 5 °C

6.3 Maximum application temperature + 60 °C

6.4 Resistance to flame propagation Non-flame propagating

6.5 Electrical continuity characteristic Without electrical continuity characteristic

6.6 Electrical insulating characteristic With electrical insulating characteristic

6.7 Degrees of protection provided by enclosure IP 40

6.9 System access cover retention With a tool

6.101 Position when surface mounted Wall fixed, ceiling fixed, wall fixed and supported by the floor or other horizontal surface

6.102 Prevention of contact between liquids and insulated conductors and live parts in case of CTS/CDS mounted in a skirting position and wet-treatment of floor Instructions restricting the installation position

6.103 The functions provided Type 2: 0 104 32/33/52/53, type 3: other Cat.Nos

Rated current 500 V

Against mechanical shocks IK 07

n New standard EN 50085-2-1

Composition and functions of universal DLP trunking

Trunking Trunking and accessories Angles Flat junction(3) Supports for wiring

accessories

Cross-section (mm2)

Number of compartments

Covers width (mm)

Size(mm)

Bodies Covers Separation partitions(2)

End cap(2) Cover joints

Internal angle(1)

85 to 95°

External angle(1)

60 to 120°

Flat angle(1) To width 80 mm(2)

To width 105 mm(2)

Trunking for mounting of devices with support - 65 mm cover

1

6535 x 80

0 104 61 (body and cover

complete)0 105 84 0 107 22 0 108 01 0 106 01 0 106 21 0 107 67 0 107 35 - (3) 2240

6550 x 80


complete)0 105 82 0 107 22 0 108 01 0 106 02 0 106 22 0 107 67 0 107 35 - (3) 3340

6550 x 105


complete)0 105 82 0 107 00 0 108 01 0 106 05 0 106 19 0 107 86 0 107 39 0 107 40 (3) 4380

2

65 6550 x 150


complete)0 105 82 0 107 03 2 x 0 108 01 0 106 06 0 106 35 0 107 89 0 107 35 0 107 36

or 0 107 37 (3) 3060/3060

3

40 65 4050 x 170


complete)0 105 82 0 107 10 2 x 0 108 00

+ 0 108 01 0 106 50 0 106 38 0 107 98 0 107 35 0 107 36 or 0 107 37 (3) 2 x

2050/2770

65 65 6550 x 220


complete)0 105 82 0 107 05 3 x 0 108 01 0 106 50 0 106 38 0 107 95 0 107 35 0 107 36

or 0 107 37 (3) 2 x 3060/2770


1

8535 x 105


complete)0 105 82 0 107 01 0 108 02 0 106 01 0 106 21 0 107 84 0 107 35 0 107 36 (4) 2850

8550 x 105


complete)0 105 82 0 107 02 0 108 02 0 106 02 0 106 22 0 107 85 0 107 35 0 107 36

or 0 107 37 (4) 4300

2

85 8550 x 195


complete)0 105 82 0 107 11 2 x 0 108 02 0 106 06 0 106 35 0 107 92 0 107 35 0 107 36

or 0 107 37 (4) 3940


1

13050 x 150


complete)0 105 82 0 107 03 0 108 04 0 106 02 0 106 22 0 107 89 0 107 35 0 107 36

or 0 107 37 (5) 6440

13065 x 150


complete)0 105 83 0 107 06 0 108 04 0 106 03 0 106 23 0 107 90 0 107 33 0 107 38 (5) 8200


1

18050 x 195


complete)0 105 82 0 107 11 0 108 06 0 106 02 0 106 22 0 107 92 0 107 35

0 107 36 or

0 107 37- 8460

18065 x 195


complete)0 105 83 0 107 07 0 108 06 0 106 03 0 106 23 0 107 93 0 107 33 0 107 38 - 11240

1: Classification and performance are for a mounting at an angle of 90°2: See mounting and assembling instructions on technical sheets, boxes or on www.legrand.fr3: Mosaic supports for wiring accessories, cover width 65 mm: Cat.Nos 0 109 10/52/54/56/584: Universal and Mosaic supports for wiring accessories, cover width 85 mm: Cat.Nos 0 109 13/23/33/92/93/94/96/985: Universal supports for wiring accessories cover width 130 mm: Cat.Nos 0 109 14/24/34

Type 1, type 2 distribution, type 3 installation

for emample mmmmmmm universal 9AE trunking...

Documents

Transcript of for emample mmmmmmm universal 9AE trunking...