FOR ALL YOUR DIESEL ENGINE PROTECTION NEEDS · view our catalogue online product catalogue for all...
Transcript of FOR ALL YOUR DIESEL ENGINE PROTECTION NEEDS · view our catalogue online product catalogue for all...
www.epe.net.auVIEW OUR CATALOGUE ONLINE
PR ODUCT CATALOGUEFOR ALL YOUR DIESEL ENGINE PROTECTION NEEDS
ISSUE 9
Engine Protection Equipment Pty, Ltd70 Horus Bend, Bibra Lake, Western Australia 6163
Ph: 08 9330 7444 Email: [email protected]
www.epe.net.auVIEW OUR CATALOGUE ONLINE
Engine Protection Equipment Pty, Ltd70 Horus Bend, Bibra Lake, Western Australia 6163
Ph: 08 9330 7444 Email: [email protected]
ENGINE PROTECTION EQUIPMENT PTY LTD was founded way back in 1970 by
H.J. (John) Deetman. John was a well known and liked local businessman having owned petrol stations
along Canning Hwy through East Fremantle.
After retiring from his service stations, John saw a niche in the diesel engine protection industry and
decided to distribute well known brands from his residence’s carport in East Fremantle. In 1976, EPE
became a family affair with John’s son, Peter, taking an interest in the company and the new father/
son team decided to expand to the new industrial area of Norma Rd, Myaree. By 1978, John’s other
son founded Exhaust Fabricators (WA) which operates to this day alongside EPE with each company
complementing the other’s products and services.
Under new management, the Deetman family have expanded the business to new, custom built
premises in Phoenix Industrial Park. The new premises on Sudlow Rd, Bibra Lake was completed at
start of 2017 and we look forward to offering the same old fashioned good service to our customers
from a modern, easier to access facility. With the new premises having more than triple the storage
space, new distributorships have also been awarded to EPE from the world’s largest and most trusted
engine protection component manufacturers.
ABOUT USFrom Humble Beginnings…
What’s next…
PAGE 3
Section 1 - Instrumentation/ Engine Protection Page 5
Section 2 - Hazardous Area Products Page 21
Section 3 - Dry/ Wet Exhaust & Thermal Insulation Page 29
1.1 Murphy Analogue Gauges 6
1.2 Murphy Level Gauges, Tachos, Relays 7
1.3 Murphy Engine Control Panels 8
1.4 Murphy PowerView and CAN Modules 9
1.5 Parker Pressure Gauges, Transducers, Transmitters 10
1.6 Hewitt Exhaust Pyrometers, Engine Multi Alarms 11
1.7 Woodward & Murphy Solenoids 12
1.8 Turbo Saviour (Oiler), Parker Oilcheck Monitor 13
1.9 Parker Particle Counter, Bearing Checker 14
1.10 Vibratec Mounts 15
1.11 IsoFlex Mounts 16
1.12 Isoflex Mounts 17
1.13 Isoflex Marine Drive Couplings 18
1.14 Fueltreat Biocides, Additives 19
1.15 Total Lubricants 20
2.1 Sentinel Shutdown Systems 22
2.2 Austart Air Starters 23
2.3 Murphy Hazardous Area Products 24
2.4 Wyndham Page E Valves 25
2.5 Wyndham Page FS Valves 26
2.6 Western Tydens Spark Arrestors 27
2.7 Nelson Spark Arrestors 28
3.1 Steel, SS, Aluminium Tube 30
3.2 Mandrel Bends, Donut Sections 31
3.3 Rain Caps, Exhaust Donuts 32
3.4 Clamps, Mounting Brackets 33
3.5 Adaptors, Couplers, Flanges 34
3.6 Exhaust Flanges, Gaskets 35
3.7 V-Band Clamps 36
3.8 Chrome Plated Stacks 37
3.9 Shrouds, Guards, Tanker Kits 38
3.10 Nelson Mufflers 39
3.11 Nelson Mufflers 40
CONTENTS
Section 4 - Silicone/ Rubber Hose and Clamps Page 48
Section 3 - Dry/ Wet Exhaust & Thermal Insulation Continued
Section 5 - Air/ Crankcase Filtration Page 59
4.1 Purosil Wet Exhaust Hose 49
4.2 Purosil Coolant Hose 50
4.3 Purosil Ebows, Vacuum Hose 51
4.4 Purosil Hump Hose, Heater Hose 52
4.5 Purosil Turbo Hose.xlsx 53
4.6 Mission Intake Bends 54
4.7 Mission Intake Humps 55
4.8 Gates Rubber Hoses 56
4.9 T-Bolt Clamps 57
4.10 P Clips, Clamps, Hose Joiners. 58
3.12 Thermal Insulation Products 41
3.13 Exhaust Bellows, Gaskets 42
3.14 EPE Fabrication 43
3.15 Universal AET Products 44
3.16 Universal AET Products 45
3.17 Centek Wet Exhaust Basics 46
3.18 Centek Muffler Specifications 47
5.1 Racor CCV, M&H Provent 60
5.2 Racor Air Cleaners 61
5.3 Centri, Donaldson Precleaners 62
5.4 Donaldson Accesories 63
5.5 Donaldson Powercore 64
5.6 Donaldson Powercore, Duralite 65
5.7 Donaldson Air Cleaners 66
5.8 Donaldson Air Cleaners 67
5.9 MannHummel Air Cleaners 68
5.10 MannHummel Vokes Air 69
CONTENTS
PAGE 5
Section 7 - Lube Oil/ Hydrauliic Oil Filtration Page 81
Section 6 - Fuel/ Water Filtration Page 70
7.1 Donaldson Lube Filters 82
7.2 Racor Oil Filters, Suction Strainers 83
7.3 Parker Hydraulic Elements 84
7.4 Parker Filter Assemblies 85
7.5 Fluid Level Gauges 86
7.6 Parker Breathers 87
7.7 Parker ParGel Elements 88
7.8 Parker Portable Filtration 89
6.1 Racor Turbine Series 71
6.2 Racor Spin On Alt Fuel 72
6.3 Racor FBO Filters.xlsx 73
6.4 Racor RVFS Filters 74
6.5 Racor FBO Filter Cart & Polisher 75
6.6 M+H Preline Filters 76
6.6 Racor Interceptor Filters 77
6.7 Donaldson Fuel Filters 78
6.8 Parker Watermakers 79
6.9 WIX Fuel Filters 80
CONTENTS
PAGE 6
MURPHY SWITCHGAGES
NOTE: 20Series Single Wire, A20 series #4 screw terminals
NOTE: 20Series Single Wire, A20 series #4 screw terminals
Electric Switchgage
Series 20T 20TI* A20T 20TH
Case Steel Steel* Polycarbonate Steel
SwitchingHigh
(Adjustable)High
(Adjustable)High
(Adjustable)High
(Adjustable)
Scale C° / F° C° / F° C° / F° C° / F°
Capillary Lengths 4FT - 30FT 4FT - 30FT 4FT - 35FT 10FT
* Has slots in casing to allow dial illumination via optional light kit
* Has slots in casing to allow dial illumination via optional light kit
Series 20P 20PI* A20P 20PHL 20DP
Connection(s) 1/8” - 27 NPTM2x1/8”-27
NPTMCase Steel Steel* Polycarbonate Steel Steel
SwitchingLow
(Adjustable)Low
(Adjustable)Low
(Adjustable)High/Low
(Adjustable)High
(Adjustable)
Scale PSI/ kPa PSI/ kPa PSI/ kPa PSI/ kPa PSI/ kPa
Series EGS21T* EGS21P* EGS21F* EGS21VM*
Application Temperature Pressure Fuel Level Volts
Case Polyester (PBT)
SwitchingHigh
(Adjustable)Low
(Adjustable)Low
(Adjustable)Low
(Adjustable)
Power Input 12V** 12V** 12V** 12V**
* Economical Non-Switchgage models also available
**12-24V looms also available on request
Mechanical Temperature Switchgage
Mechanical Pressure Switchgage
TATTLETALES117PH MS2110 518APH-12 518APH-24
Voltage 12/24V 12/24V 12 Volt 24 Volt
Coil Resistance 18 OHMS 288 OHMS 339 OHMS 678 OHMS
Energise To Trip YES YES
Energise To Latch YES YES
Contacts NCH NCH* NCH NCH
*In the latched position, the NCH contact has a ‘Hot’ output
PAGE 8
PAGE 9
MP3298 MP7906 MP7905 TM4594
LEVEL GAUGESLM500-TF LM302 L129 L150 EL150K1
TACHOS
HOURMETER
Sight Glass YES YES YES YES YES
Low Level Switch YES YES YES YES YES
High Level Switch NO YES YES NO NO
Level Maintainer YES YES NO NO NO
Inlet 1/2”NPTF 1/2”-14NPT 1/2”NPT 1/2”-14NPT 1/2”-14NPT
Outlet 3/4”NPTF 3/4”-14NPT - - -
Pipe Bracket Kit 15000518 15000371 - - -
Flange Mount 15000519 15000370 - - -
Oil Compatible YES YES YES YES YES
Diesel/ Coolant NO NO NO YES YES
MAGNETIC PICK UPS
Threaded Length
76 mm 76 mm 114 mm
Thread Size 5/8-16 UNF 3/4-16 UNF 3/4-16 UNF
Mount Hole 51mm
Voltage 12/24 V
Max Hours 99,999.90
Driven By Alternator Mag Pick Up Aternator Mag Pick Up Either
Rev Range 0-4000 RPM 0-4000 RPM 0-4000 RPM 0-4000 RPM 0 - 66,000 RPM
Mounting Hole 86mm 86mm 86mm 86mm 86mm
Voltage 11-28 VDC 11-28 VDC 11-28 VDC 11-28 VDC 8- 40 VDC
Hourmeter NO NO YES YES YES
* Digital Tachometer with Overspeed
ATA-40-B ATS-40-B ATHA-40B ATHS-40B MTH6*
PAGE 9
Part No. TEC-10 ML2000-4XEngine Suitabliity Mechanical or Electronic Mechanical or Electronic
Display 68mm Monochrome 96mm Monochrome
Voltage 8-32 VDC 8-32 VDC
No. Inputs 9 15
No. Outputs 7 13
Communications J1939/ RS485 J1939/ RS485
Enclosures IP67 Polycarbonate NEMA 4X Polycarbonate
Dimensions 244mm x 187mm x 132mm 291mm x 233mm x 157mm
Connectors 21 pin and 31 pin Deustch 21 pin and 31 pin Deustch
ENGINE CONTROL PANELS
XM500 Configurable Input/ Output Module
CAN INPUT/ OUTPUT MODULES
SenderCAN J1939 Input And Output Module
CANdrive J1939 to Gauge Interface
panels provide full control of your engine including auto start/stop, auto throttling
and display of engine parameters along with critical faults from the engine or application.
• Adds I/O to J1939 Network
• Works with Standard J1939 Display Modules
• Industry Standard Deutsch Enclosure and Connectors
• Custom Programming Available
• Integrates analogue and digital measurement into modern CAN and ECU-based engines
• Up to 4 sender/switch inputs
• Up to 2 gauge/control outputs
• Converts ECU CAN to drive standard gauges
• LED indication of status and faults
• Compatibility with Murphy, VDO and Datcon electric gauges
• Outputs for Tacho, Oil Pressure and Coolant Temp gauges
PAGE 10
CAN INPUT/ OUTPUT MODULES
Electronic Engine Can-Direct Gauges
IX3212 Power Distribution Modules
POWERVIEW™ J1939/ CAN DISPLAYS
PV25 PV101 PV350 PV380 PV450 PV780
Screen Size 36mm 71mm 97mm 97mm 109mm 177mm
Display Monochrome Monochrome Monochrome Monochrome Colour Colour
CAN Ports 1 1 2 1 2 2
Mount Hole 51mm 51mm 86mm 86mm N/A N/A
Voltage 6-36 VDC 8-32 VDC 6-36 VDC 6-36 VDC 6-36 VDC 6-36 VDC
Connectors 4-pin AMP 6-pin Deutsch 6-pin Deutsch 6-pin Deutsch 6-pin Deutsch AMPSEAL 23Pin
5-pin M12 12-pin Deutsch
Murphy PowerView™ products give operators a clear and concise look into modern engines while
allowing for ease of integration into any application.
• Display J1939 parameters on an analog gage
• Connectors: 6-Pin Deutsch DT06 Series
• Designed as a CAN-Direct gage without the need for a driving device
• Common parameters include: Pressure, Temperature, Time, Speed, Volts, Fuel
• Expands CAN bus control networks by replacing existing relay and fuse boxes
• Greatly simplifies harness design for ease of installation and improved reliability
• 12 Digital and 8 Analog Inputs
• Compact, Sealed, Robust Enclosure
PAGE 11
PRESSURE GAUGES
SERVICE JUNIOR DIGITAL GAUGES
Service Junior digital gauges and
gauge kits are ideal to digitally measure
pressure and capture min and max
fluctuations in any hydraulic or
pneumatic system. Comes with a
Test 20 Adaptor as Standard
Part No. Pressure Connection
PTDVB2501B1C1 250 Bar 3 Wire Micro Din
PTDVB2501B1C2 250 Bar M 12, 4 Pin
PTDVB4001B1C1 400 Bar 3 Wire Micro Din
PTDVB4001B1C2 400Bar M 12, 4 Pin
Part No. Pressure Connection
PTXB2501B1C1 250 Bar 3 Wire Micro Din
PTXB2501B1C2 250 Bar M 12, 4 Pin
PTXB4001B1C1 400 Bar 3 Wire Micro Din
PTXB4001B1C2 400Bar M 12, 4 Pin
Note: Other Pressures available - 25, 60, 100 and 600 Bar
(24 VDC SUPPLY- 1/4” BSP CONNECTION)
TRANSDUCERS/TRANSMITTERS
Part No.
-1 to 16 Bar SCJN-016-01 SCJN-KIT-016
0 to 100 Bar SCJN-100-01 SCJN-KIT-100
0 to 400 Bar SCJN-400-01 SCJN-KIT-400
0 to 600 Bar SCJN-600-01 SCJN-KIT-600
0 to 1000 Bar SCJN-1000-01 -
0 to 5V DC Output 4 to 20 mA Output
Gauge Only Gauge + Field Kit
63mm Diameter 100mm Diameter 63mm Diameter 100mm Diameter
0-4 Bar UCPGP031004 - - -
0-10 Bar UCPGP031010 UCPGC0631010 UCPGB1001010 UCPGE1001010
0-16 Bar UCPGP031016 UCPGC0631016 UCPGB1001016 UCPGE1001016
0-25 Bar UCPGP031025 UCPGC0631025 UCPGB1001025 UCPGE1001025
0-40 Bar UCPGP031040 UCPGC0631040 UCPGB1001040 UCPGE1001040
0-60 Bar UCPGP031060 UCPGC0631060 UCPGB1001060 UCPGE1001060
0-100 Bar UCPGP031100 UCPGC0631100 UCPGB1001100 UCPGE1001100
0-160 Bar UCPGP031160 UCPGC0631160 UCPGB1001160 UCPGE1001160
0-250 Bar UCPGP031250 UCPGC0631125 UCPGB1001250 UCPGE1001250
0-400 Bar UCPGP031400 UCPGC0631400 UCPGB1001400 UCPGE1001400
0-600 Bar UCPGP031600 UCPGC0631600 UCPGB1001600 UCPGE1001600
0-1000 Bar - - UCPGB10011000 UCPGE10011000
Note: Flange mount gauges for dash mount with rear conn. also available
Bottom Connection Rear Connection
PAGE 12
PYROMETER GAUGES
MULTI-ALARMS
Hewitt Multi-Alarms are designed to protect engines
from low oil pressure, high coolant temperature and
low coolant level. All models can utilise existing
pressure and temperature switches and most coolant
level sensors when available for lower cost and ease
of application. Temperature and pressure switches
and coolant level sensors are available as required.
Part No. Description
191-500 Multi Alarm 12 Volt
191-500-1 Multi Alarm 24 Volt
022-011 Pressure Switch
021-113 1/2” NPT Temp Switch
WLP Level Probe (Rubber Seal)
020-004 Level Probe (Solder On)
Part No. Description
010-112-2 Pyrometer 51mm 150-700°C
010-114-2 Pyrometer 51mm 425-980°C
010-405-2 Pyrometer 76mm 150-700°C
010-408-2 Pyrometer 76mm 425-980°C
010-503-2 Pyrometer 76mm 150-700°C Dual
010-505-2 Pyrometer 76mm 425-980°C Dual
015-001 Thermocouple Short 1/4” NTP
015-002 Thermocouple 1/4” NTP
015-029 Thermocouple 1/4” NTP 1/4” NPT Above Ground
035-003 Lead Wire 4.3m Long - Dual
035-006 Lead Wire 4.3m Long - Single
036-007 Extension Wire
Pyrometer Gauges are used to measure exhaust gas temperature. Hewitt Pyrometers are designed
for use with K-Type Thermocouples with no external power required except for illumination.
Bracket and light kit included.
TRANSDUCERS/TRANSMITTERS
PAGE 13
COIL COMMANDERStime out a solenoid’s high amperage
pull coil within approx 1.5 seconds
SD85 MODULES ensure the energize coil is only
powered for 1-2 seconds
SOLENOIDS
SOLENOID TIMERS
Woodward Pull Solenoids
Woodward Murphy
Woodward Solenoid Kits
Murphy Push/ Pull Solenoids
Internally Switched Externally SwitchedSeries 1504 1751 2003 1751ES 2003ESStroke 25mm
Pull Force (Nm) 53 107 169 111 98
Hold Force (Nm) 85 169 218 182 191
Voltage 12V or 24V
Mounting Flange or Base
Part No. RP2307B RP2308B RP2309B RP2310BVoltage 12V 24V 12V 24V
Stroke 25mm 25mm 38mm 38mm
Pull Force 49Nm 49Nm 62Nm 62Nm
Hold Force 102Nm 102Nm 151Nm 151Nm
RSV BOSCH KUBOTA 3a
Part No. SA-3742-12 SA-3799-24 SA-3800-12 SA-4642-12 SA-4259-12
Solenoid In Kit 1751 (ES) 1751 (ES) 1751 (IS) 1751 (IS) 1751 (IS)
Mount Style Left Hand Right Hand Right Hand Left Hand 70mm/80mm
Voltage 12 24 12 12 12
PAGE 14
TURBO SAVIOUR
OILCHECK™ OIL MONITOR
TURBO SAVIOUR performs two separate functions:
1. Complete filtration of oil supply to the Turbocharger.
2. Provide a continued supply of oil to the Turbocharger after engine shut down.
Turbo savior is suitable for engines up to 550HP and will supply oil for up to
5 mins after shut down.
SPECIFICATIONS
Overall Height 270mm
Accumulator Dia 115mm
Filter Dia 95mm
Mounting Flange 110 x 87mm
Bolt Holes (4off) Dia 10mm
Oil Inlet - Female 3/8” NPT
Oil Outlet - Female 3/8” NPT
Dry Weight 2 Kg
Oil Capacity 750ml
Filter LFP2221
Power Source 1 x 9V Battery
Oil Suitability Mineral and Synthetic
Battery Life >150 Hours or 3000 Tests
Casing ABS Polymer
Display LCD Screen
Dimensions 250 x 95mm x 34mm
Weight 0.4kg
Oilcheck detects contaminants in oil by comparing
measurements obtained from used and unused oils of
the same brand. Through this operation, Oilcheck is able
to show changes in the oil condition brought about by
the ingress of water content, fuel contamination, metallic
content and oxidation. Oilcheck gives an early warning
of impending engine failure and the simplistic hand-held
design makes it easy to use.
G4000B
OLK605
PAGE 15
The icountPD is a compact, permanently mounted laser-based particle detector module that
provides a cost-effective solution to fluid management and contamination control.
MHC-Bearing Checker is a unique hand held instrument,
providing maintenance engineers with an easy to operate,
simple to use and quick method of analysing bearing
condition and lubrication state.
PD122230
FGH11510PA
iCountPD INLINE PARTICLE DETECTOR
MHC BEARING CHECKER
Power Source NiMH recargeable battery
Display LCD Screen
Dimensions 98mm x 62mm x 34mm
Weight 0.2Kg
Power Requirement 9-40Vdc
Dimensions 182mm x 155mm x 86mm
Weight 1.3kg
Connecion (Oil) M16x2 Test Points
Connection (Fuel) 1/8th” BSP Female Ports
Required Flow 40 - 140 mL/min
Viscosity Range 1 - 500 cSt
Working Pressure 30 - 6000 PSI
TYPICAL APPLICATIONS: • Mobile Equipment (Heavy Machinery)
• Industrial Equipment (Wind Turbines)
• Power Generation
• Test Rigs/Flushing Stands
PAGE 16
RUBBER MOUNTS - MALE / MALE
RUBBER MOUNTS - FEMALE / FEMALE
METAL MOUNTS
METAL CUSHIONS
POLYMER CYLINDRICAL MOUNTS
Application: Compression
Application: Compression
Application: Compression and Suspension
Application: Compression and Suspension
Application: Compression and Suspension
Stainless steel resilient cushion with excellent resistance to oils, solvents and extreme temperatures
Ceramic coated steel mounts with stainless steel resilient element
Part No. Core Dia Core Length Duro ThreadVIB MALE20/20-M6 20mm 20mm 55 M6 x 18
VIB MALE25/25-M6 25mm 25mm 40 M6 x 18
VIB MALE40/40-M8 40mm 40mm 55 M8 x 20
VIB MALE50/50-M10 50mm 50mm 55 M10 x 28
VIB MALE75/50-M12 75mm 50mm 55 M12 x 37
Part No. Core Dia Core Length Duro Thread
VIB FEMALE25/25-M6 25mm 25mm 40 M6 x 18
VIB FEMALE40/40-M8 40mm 40mm 55 M8 x 20
VIB FEMALE50/50-M10 50mm 50mm 55 M10 x 28
VIB FEMALE75/50-M12 75mm 50mm 55 M12 x 37
Part No. Base Footprint
Base Bolt Centres
Base Height
Overall Height
Bolt Hole Dia
Load Range daN
VTCI-300F121 x 100mm 99mm 40mm 56mm M12
100-300
VTCI-700F 200-700
Part No. A B C D E Load Range daN
VIB_VT1120 50mm 25mm 10mm 20mm 9mm 30-300
Mount Model
Load Per Mount (Kg) Diameter Bolt
DiameterMin Free Height
CM6 1.0 - 4.0 22mm M6 32mm
CM8 15 - 50 27.5mm M8 34.5mm
CM10 15 - 50 30mm M10 40mm
PAGE 17
ISOFLEX POLYMER MOUNTS
Light Machinery Mounts
Hardness Selection
General Purpose Mounts
MAXIMounts - Bolt Mounts
Core Colour Hardness SDH-A
Yellow 50 Duro
Red 60 Duro
Black 70 Duro
Dark Blue 75 Duro
Green 80 Duro
Grey 85 Duro
Mount Model Load Per Mount (Kg)
Base Bolt Centres Base Bolt Dia. Bolt Dia. Min Free
Height
M5-6 (50) 1.0 - 10 50mm M6 M6 x 20 18mm
M6-6 (50) 1 - 10 65mm M6 M6 x 20 20mm
M6-6 (75) 10 - 30 65mm M6 M6 x 20 20mm
Mount Model Load Per Mount (Kg)
Base Bolt Centres Base Bolt Dia. Bolt Dia. Min Free
Height
GPM6-6B 1.0 - 20 65mm M6 M6 20mm
GPM7FS-10B 30 - 150 75 - 89mm M8 M10 35mm
GPM7FS-12B 30 - 150 75 - 89mm M8 M12 35mm
GPM10FS-12B 40 - 250 100 - 106mm M12 M12 40mm
GPM13FS-16B 50 - 300 98 - 110mm M12 M16 57mm
GPM15FS-16B 75 - 300 126 - 133mm M12 M16 60mm
GPM15FS-20B 75 - 300 126 - 133mm M12 M20 60mm
Mount Model Load Per Mount (Kg)
Base Bolt Centres Base Bolt Dia. Bolt Dia. Min Free
Height
M55 25 - 200 134 x 75mm 100 - 105mm M12 or M16 60mm
M75 75 - 300 177 x 98mm 127mm M16 or M20 59mm
M85 75 - 300 190 x 98mm 140mm M16 or M20 59mm
M90 75 - 350 177 x 100mm 125mm M20 or M24 75mm
M130HD 250 - 750 240 x 127mm 182mm M20 or M24 75mm
M135HD 600 - 1200 240 x 145mm 182mm M24 98mm
M125xHD 600 - 1200 367 x 127mm 308mm M24 98mm
PAGE 18
ISOFLEX POLYMER MOUNTS
MAXIMounts - Adjusting Stud
Dual Compression Mounts
ANS20 and ANS24 Studs (Standard) AST20 and AST24 Studs (Heavy Duty)
Mount Model Load Per Mount (Kg)
Base Foortprint
Base Bolt Centers Stud/Bolt Dia. Min Free
HeightMDC30 30 - 120 225 X 74mm 174mm M16 105mm
M55 25 - 200 134 x 75mm 100 - 105mm M12 OR M16 65mm
M75 75 - 300 177 x 98mm 127mm M16 OR M20 86mm
M85 75-300 190 x 98mm 140mm M16 OR M20 59mm
M90 75 - 350 177 x 100mm 127mm M20 OR M24 104mm
M100 75 - 350 188 x 100mm 140mm M20 OR M24 108mm
M110 75 - 350 220 x 107mm 170mm M20 OR M24 128mm
M120HD 250 - 750 230 x 112mm 182mm M20 OR M24 96mm
M120XHD 600 - 1000 230 x 112mm 182mm M20 OR M24 96mm
M125HD 250 - 750 240 x 127mm 170mm M20 OR M24 134mm
M125XHD 600 - 1000 240 x 127mm 170mm M24 134mm
M130HD 250 - 750 240 x 127mm 182mm M20 OR M24 110mm
M130XHD 600 - 1000 240 x 127mm 182mm M24 110mm
M135HD 600 - 1200 240 x 145mm 182mm M24 140mm
M138HD 600 - 1200 240 x 145mm 182 x 65mm M24 120mm
Mount Model A (mm)
B (mm)
C (mm)
D (mm)
E (mm)
F (mm)
Working Load (Kg)
MT58421012 58 40 M12 12 10 12 20-100
MT66380816 66 38 M16 16 8 15 40-250
MT70301920 70 30 M20 18.5 19 9.5 40-350
MT70301916 70 30 M16 18.5 19 9.5 40-350
MT75351214-F 75 38 M14 28 12 28 80-400
MT75351214-T* 75 38 M14 38 12 18 50-300
MT75401616 75 40 M16 28 16 28 80-400
MT90401616 90 40 16 16 10 16 150-700
MT 125582034 125 58 3/4" 40 20 40 250-1000
MT 125642034 125 64 3/4" 40 20 40 250-1000
* Tapered top core
PAGE 19
Model Bolt Circle Dia. Bolt Size Ring Type Ring Dia. Outside Dia. Inside Dia. Thickness
IFC4200 (90) 78mm 10mm F 50mm 125mm 35mm 25mm
IFC4300 (95) 82mm 3/8" F 63.5mm 125mm 35mm 25mm
IFC4400 (95) 100mm 10mm F 65mm 145mm 50mm 25mm
IFC4500 (95) 107mm 7/16" F 63.5mm 150mm 45mm 28.6mm
IFC4500 (HT) 107mm 7/16" F 63.5mm 150mm 45mm 28.6mm
IFC4550 (95) 107mm 7/16" F 63.5mm 150mm 45mm 28.6mm
IFC4550 (HT) 107mm 7/16" F 63.5mm 150mm 45mm 28.6mm
IFC4600 (95) 80mm 10mm M 60mm 125mm 35mm 25mm
IFC4700 (95) 95.2mm (Rect) 7/16" F 69.8mm 135mm 50mm 32mm
IFC4800 (95) 79.3mm (Rect) 3/8" F 60.3mm 125mm 35mm 25mm
IFC4900 (95) 120.6mm (Rect) 1/2" F 95.2mm 175mm 50mm 36.5mm
Model Bolt Circle Dia. Bolt Size Ring Type Ring Dia. Outside Dia. Inside Dia. Thickness
IFC6000 (95) 98.4mm 7/16" M 63.5mm 150mm 50mm 31.7mm
IFC6000 (HT) 98.4mm 7/16" M 63.5mm 150mm 50mm 31.7mm
IFC6100 (95) 120.6mm 1/2" UNC M 76.2mm 160mm 60mm 38.1mm
IFC6125 (95) 120.6mm 1/2" UNC F 76.2mm 160mm 60mm 38.1mm
IFC6150 (95) 120.6mm 16mm SHCS M 76.2mm 160mm 60mm 38.1mm
IFC6300 (95) 152.4mm 16mm SHCS M 95.2mm 212mm 73mm 38.1mm
IFC6300 (IV) 152.4mm 16mm SHCS M 95.2mm 212mm 73mm 38.1mm
IFC6400 (95) 152.4mm 16mm SHCS M 95.2mm 195mm 73mm 38.1mm
IFC6400 (HT) 152.4mm 16mm SHCS F 95.2mm 195mm 73mm 38.1mm
IFC6500 (95) 260mm 3/4" UNC F 170mm 330mm 95mm 45mm
IFC6600 (95) 205mm 16mm SHCS M 130mm 260mm 95mm 38.1mm
Model Bolt Circle Dia. Bolt Size Ring Type Ring Dia. Outside Dia. Inside Dia. Thickness
IFC8100 (95) 190mm 16mm SHCS M 152.4mm 275mm 95mm 38.1mm
IFC8100 (HT) 190mm 16mm SHCS M 152.4mm 275mm 95mm 38.1mm
IFC8200 (95) 190mm 16mm SHCS M 152.4mm 242mm 95mm 38.1mm
IFC8200 (HT) 190mm 16mm SHCS M 152.4mm 242mm 95mm 38.1mm
IFC8300 (95) 152.4mm 16mm SHCS M 95.2mm 195mm 73mm 38.1mm
IFC8400 (95) 200mm 16mm SHCS M 110mm 275mm 75mm 38.1mm
IFC8400 (HT) 200mm 16mm SHCS M 110mm 275mm 75mm 38.1mm
IFC8534 (95) 222.2mm 3/4" UNC M 127mm 315mm 75mm 45mm
IFC8600 (95) 230mm 20mm M 150mm 315mm 100mm 45mm
IFC8690 (95) 228.6mm 3/4" UNC M 152.4mm 300mm 95mm 45mm
IFC8695 (95) 241.3mm 3/4" UNC M 152.4mm 330mm 95mm 45mm
IFC8695 (HT) 241.3mm 3/4" UNC M 152.4mm 330mm 95mm 45mm
IFC8700 (95) 280mm 7/8" UNC F 200mm 355mm 75mm 50mm
IFC8800 (95) 340mm 1" UNC M 180mm 455mm 130mm 60mm
ISOFLEX GEARGUARD FLEXIBLE COUPLINGSFlexible Couplings are the sacraficial link designed to fail & protect the gearbox.
4 Bolt Couplings
6 Bolt Couplings
8 Bolt Couplings
PAGE 20
Pack SizeVolume of Fuel Treated
Contaminated Fuel Fresh Diesel
100ml 100L 200L
1L 1000L 2000L
10L 10,000L 20,000L
Pack SizeVolume of Fuel Treated
Contaminated Fuel Fresh Diesel
10L 40,000L 90,000L
200L 800,000L 1,800,000L
1000L 4,000,000L 9,000,000L
FUELTREAT FUEL CLEANERS/BIOCIDES
WIX FUEL CONTAMINATION TESTS/TREATMENTS
FI-700 – Petrol Engine Fuel System Cleaner CR-800 – Common Rail Diesel Cleaner
• Cleans the fuel injectors
• Cleans carburettors
• Improves fuel spray pattern
• Cleans intake valves
• Cleans deposits from injectors
• Frees sticky injectors
• Improves spray pattern
• Lubricates the fuel system
Pack Size Volume of Fuel Treated
250ml 75 Litres
Pack Size Volume of Fuel Treated
300ml 100 Litres
BC-250 Biocide/Injector Cleaner FT-400 Bulk Diesel Biocide/Cleaner
• Cleans your injectors, and fuel system
• Kills bacterial and fungal contaminations (diesel bug).
• Helps separate water from your fuel (emulsified water back to free water)
• Is safe and easy to use.
• Cleans tanks and fuel lines
• Maintains cleanliness of your engine’s fuel system
• Kills fungal and bacterial contaminations
• Helps separate water from your fuel
Diesel Tank Water Absorber Fuel Contamination Test Swabs
Part No. Length Water Absorbtion Application
24580* 203mm Up to 80ml Stationary
24581 610mm Up to 739ml Stationary
24582 914mm Up to 1183ml Stationary
24583 3048mm Up to 4140ml Stationary
24587 457mm Up to 1183ml Mobile**
24588 914mm Up to 1331ml Mobile**
* Suitable for petrol applications **Features a magnet to hold to walls of tank
Part No. Qty of Swabs Extension Probe Inc.
Identifies WIF*
24383 10 Yes Yes
24384 60 Yes Yes
*WIF: Water in Fuel
PAGE 21
TOTAL LUBRICANTS
RUBIA Monograde Engine oils
RUBIA Multigrade Engine Oils
QUARTZ Multigrade Engine Oils
Specialty Oils
Part No. Specifcation Oil Base Weight Application
S30 API CF/SF Mineral SAE 30Older engines,
Gearboxes
CF-2 API CF-2, API CD II Mineral SAE 40Detroit Diesel 2
Stroke
Part No. Specifcation Oil Base Weight Application
Rubia 7400
ACEA E7, API CI-4/SL/CH-4
Mineral 15W40Generic Diesel
Engine Oil
Rubia 7900
ACEA E9/E7-04, API CJ-4/SM/CI-4
Semi Synthetic
15W40Diesel, Low SAPS
(for DPF's)
Rubia 8900
ACEA E6/E7/E4-99, API CI-4/CH-4
Fully Synthetic
10W40Diesel, Extended
Service Life
Part No. Specifcation Oil Base Weight Application
Quartz 5000
API SN/CF Mineral 15W50 Petrol and Diesel
Quartz 7000
ACEA A3/B4, API SL/CF
Semi Synthetic
10W40 Petrol and Diesel
Quartz 9000
ACEA A3/B4, API SN/CF
Fully Synthetic
5W40Petrol , Diesel and
LPG
Quartz MC3
ACEA C3, API SN/CF
Fully Synthetic
5W30Petrol and Diesel
(Low SAPS)
Future 9000
ACEA A5/B5, API SL/CF
Fully Synthetic
5W30Petrol (High Perf.
Turbo)
Part No. Oil Base Visc. @ 40°C Application
Dynatrans AC30
Mineral 105Gearbox,
Hydraulic, Trans.
Azolla 46 Mineral 46 Hydraulic
Azolla 68 Mineral 68 Hydraulic
Dacnis 46 Mineral 46Rotary Air
Compressors
PAGE 22
SENTINEL SYSTEMS PROTECT AGAINST: • Low oil pressure
• Loss of coolant
• High oil temperature
• High coolant temperature
• High transmission temperature
• Loss of tail pump pressure on irrigation engines
Note: DL Master Controls available and feature larger ports and greater fuel flow capacity Note: DTF Series Master Control available which offers engine RPM (torque) reduction
When an abnormal condition occurs in a diesel engine, a Sentinel protection system automatically
shuts it down or reduces RPMs by controlling the fuel supply. Sentinel systems are entirely mechanical
and independent of electrical circuits which is desirable for explosive environments.
Model D-5 D-10 D-15 D-20 D-25
Oil Setting Press 5 - 25 PSI 5 - 25 PSI 5 - 25 PSI 5 - 25 PSI 5 - 25 PSI
Fuel Flow 285 GPM 285 GPM 285 GPM 285 GPM 285 GPM
In/Out Ports 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT
Spring Force 5 lbs 10 lbs 15 lbs 20 lbs 25 lbs
SENTINEL SHUTDOWN SYSTEMS
Model Thread Temperatures Avail.
H 1/2” NPT Options between 180-220F
HA 3/8” NPT Options between 180-220F
Crack Press. Open .50 PSI
Crack Press. Close .75 PSI
Flow Resistance 1 PSI
Inlet / Outlet Size 1/4” NPTF
Coolant Port 1/8” NPTF
Master Controls
Coolant Pressure Valve (CPV)
Heat Sensors
PAGE 24
AUSTART AIR STARTERS
Turbine Starters (Diesel Applications)
Vane Starters
Designed for applications where limited space or contorted fitment has to be addressed.
Z and U shape configurations, along with an array of flange and pinion options enable
fitment where no other air starter can accommodate.
ATS103 Series - For Diesel
Applications 50 - 250 Litres
ATS93 Series - For Diesel
Applications 25 - 70 Litres
ATS83 Series – For Diesel
Applications 14 - 30 Litres
ATS73 Series - For Diesel
Applications 7 - 16 LitresATS63 Series - For Diesel
Applications 3 - 8 Litres
ATS53 Series – For Diesel
Applications up to 3 Litres
The driving mechanism is a specially designed 3-stage high speed turbine wheel.
The rotating energy is transferred through a series of reduction gears providing the
necessary torque and speed to accommodate the particular engine’s specifications.
Unlike electric starters which potentially create sparks and require expensive, and sometimes
unreliable batteries, air starters are powered by compressed air (pneumatics) - providing a completely
safe and reliable energy source while totally eliminating all possibilities of electrical ignition.
BY INGENIOUS DESIGN, BENEFITS OF AUSTART AIR STARTERS OVER ELECTRICAL STARTING SYSTEMS INCLUDE:
• Higher cranking torque
• Extended cranking periods
• No batteries are required
• Faster, more reliable starting
• Prolonged operating life
• Fewer moving parts
• Longer service intervals
PAGE 25
Maintains the crankcase oil level of an engine, pump or compressor. Adjusted to the correct running-oil-level, it will replenish oil as it is used. The low-level switch will alarm and/or shutdown the equipment if supply oil is lost and the equipment continues to use oil.
LM500-TF-ATEX Lube Level Maintainer (ATEX Certified, Zone 2, Category 3G)
EL150EX Level Switch Gauge (CSA Listed for Class I, Division 1, Group C & D)
Combination liquid level gage and low-limit switch. It can be used to monitor coolant level, lube oil, hydraulic fluid or diesel fuel reservoirs and
activate alarms and/or shut down at a predetermined minimum level.
SDB500EX Temperature Gauge (CSA listed for Class I, Group C and D)
Direct Mount Temperature Swichgage with a temperature range of 40° to 260°C. Features an easy to adjust knob on front of the Swichgage instrument allows you to adjust the limit switch trip point and large, easy to read dial.
PowerView PV101-C-HAZ Display (ATEX Certified, Zone 2, Category 3G)
SAE J1939 compliant digital display that allows operators to view standard engine and transmission parameters as well as active and stored trouble codes. The device can show a single parameter or display four parameters simultaneously.
20.SS Shock/Vibration Switch (ATEX Ex II 2 G / Ex d IIC T6 Gb)
Electromechanical device designed to protect equipment from damaging shock or vibration. The mechanism detects excessive shock and shuts down the equipment before further damage occurs. Features fine adjustment to select the degree of sensitivity and Remote reset option.
HAZARDOUS AREA PRODUCTS
PAGE 26
Wyndham Page is a UK based manufacturer of diesel engine safety products for
hazardous area applications. They specialise is making shut down valves designed for
situations where flammable gas or vapour may enter the atmosphere in the area
in which a diesel engine is operating.
Range of easily installed diesel engine air intake valves which
automatically close on engine overspeed.
E-M Series: Automatic/Manual Overspeed Shut Down Valves
AIR INTAKE SHUTDOWN VALVES
E Series - Automatic Overspeed Shut Down Valves
Model POWER RANGE (HP) DIMENSIONS (mm) HOSE ADAPTOR
RANGE (mm)
Min Max A B L MASS Min Max
E02 4 24 66 49 20 0.35kg 35 45
E05 5 36 81 49 20 0.45kg 35 58
E10 10.0 60 102.5 65 20 0.7kg 40 80
E20 40 105 121.5 66 20 0.9kg 58 96
E30 54 121* 130 70.5 25 1.1kg 70 102
E40 67 148 144 80 25 1.3kg 70 108
E50 107 188 158 86 25 1.7kg 77 115
E60 134 248 175 91 25 2.0kg 89 115
E70 174 315 207 105 25 3.3kg 101 140
E80 201 389 232 115 30 4.0kg 127 178
Model POWER RANGE (HP) DIMENSIONS (mm) HOSE ADAPTOR
RANGE (mm)
Min Max A B L MASS Min Max
E02M 4 24 66 60 20 0.35kg 35 45
E05M 5 36 81 60 20 0.45kg 35 58
E10M 10.0 60 102.5 76 20 0.7kg 40 80
E20M 40 105 121.5 80.5 20 0.9kg 58 96
E30M 54 121* 130 88 25 1.1kg 70 102
E40M 67 148 144 96 25 1.3kg 70 108
E50M 107 188 158 103 25 1.7kg 77 115
E60M 134 248 175 109 25 2.0kg 89 115
E70M 174 315 207 125 25 3.3kg 101 140
E80M 201 389 232 135 30 4.0kg 127 178
Range of easily installed diesel engine air intake valves which automatically close onengine overspeed and also incorporate a manual cable for shut down.
* a manual shut down feature for additional safety.
PAGE 27
EMERGENCY SHUT DOWN SOLENOID INTAKE VALVES
Dimensions
Suit Hose Bore A B
FS1 FS2 FS3D E
C C C
38mm
57 81 136 131 131 50 20
44mm
51mm
57mm
64mm
70mm
76mm
71 99 154 149 149 28 2583mm
89mm
95mm
102mm
95 125 180 175 175 35 25108mm
114mm
121mm
127mm
120 154 209 204 204 42 25133mm
140mm
146mm
152mm
145 185 241 236 236 49 25
159mm
165mm
171mm
178mm
FS1 Valves - Solenoid Powered To Close / Manual Reset
FS2 Valves - Solenoid Powered to Close / Auto Reset
FS3 Valves - Solenoid Powered to Open / Spring to Close (Failsafe)
Achieves rapid shut down of a diesel engine once triggered by a 12/24V signal.
This signal may be generated automatically by engine overspeed or any other
selected fault conditions and/or applied via a manual emergency stop button.
Achieves rapid shut down of a diesel engine once triggered by a 12/24V signal.
This signal may be generated automatically by engine overspeed or any other
selected fault conditions and/or applied via a manual emergency stop button.
An electrical signal must be applied continuously to hold the FS3 valve in the
open state to enable the engine to be started and run. Loss of this electrical
signal results in closure of the valve thereby bringing the running engine to a
stop within a few seconds.
FS1 Dimension Drawing
FS2/ FS3 Dimension Drawing
PAGE 28
WESTERN TYDENS ATEX SPARK ARRESTORS
Centrifugal Range - Permanent Installation
Auxiliary Range - Temporary Installation
FEATURES:• Available for applications from 1 – 1500HP
• Stainless steel models comply with the ATEX directive
• Each spark arrestor carries an ATEX and CE approval plate
• Virtually maintenance free
• Can be mounted horizontally or vertically
• Inlet and Outlet are both Female Connections
• Modest Silencing
• Stainless Steel Construction
Part No. Length Barrel Dia. In/ Out Size Power Range (HP)A B D C
SATGSA30L1.5" 490mm 305mm 92mm 38mm 10-45 HP
SAWT2L902" 640mm 455mm 92mm 51mm 20 - 50 HP
SAWT2L1252" 680mm 500mm 125mm 51mm 30 - 80 HP
SAWT2L150X21/2" 885mm 665mm 150mm 63mm 50 - 120 HP
SAWT2L150X3" 885mm 665mm 150mm 76mm 50 - 120 HP
SAWT2L17531/2" 971mm 750mm 175mm 89mm 95 - 200 HP
SAWT2L2004" 1145mm 910mm 200mm 102mm 150 - 340 HP
SAWT2L2355" 1335mm 1110mm 235mm 127mm 250 - 450 HP
SAWT2L3006" 1490mm 1250mm 300mm 152mm 325 - 550 HP
SAWT2L3608" 1758mm 1500mm 360mm 203mm 475-750 HP
• Inlet = Female, Outlet = Male Connection
• Compact Design
• Stainless Steel Construction
Part No. Length Barrel Dia. In/Out Size Power Range (HP)A B D C
SAWT1L1252" 369mm 145mm 125mm 51mm 15 - 35 HP
SAWT1L1522.5" 393mm 165mm 152mm 63mm 20 - 50 HP
SAWT1L2052.75" 450mm 205mm 205mm 70mm 40 - 90 HP
SAWT1L2353" 487mm 235mm 235mm 76mm 70 - 130 HP
SAWT1L3004" 550mm 300mm 300mm 102mm 90 - 165 HP
PAGE 29
SAA SAMA
NELSON SPARK ARRESTORSSpark Arrestor - USA Design
Spark Arrestor - Screen Type
Spark Arrestor - Cyclonic Type
• These spark arrestors exceed U.S. Forresatry Service Standard 5100-1c
• These spark arrestors can be mounted horizontally or vertically
Part No. CFM Rating A (I/D) B (O/D) C D E F
49110U 80 25mm 32mm 108mm 81mm 150mm 150mm
49115U 165 38mm 38mm 108mm 79mm 150mm 36mm
49120B 295 51mm 51mm 143mm 163mm 279mm 51mm
49125A 450 63mm 63mm 143mm 218mm 325mm 51mm
49130A 660 76mm 76mm 168mm 259mm 378mm 64mm
49135A 900 89mm 89mm 194mm 305mm 447mm 76mm
49140A 1180 102mm 102mm 216mm 371mm 538mm 86mm
49150A 1840 127mm 127mm 244mm 406mm 610mm 102mm
49160A 2650 152mm 152mm 308mm 559mm 686mm 51mm
• For applications up to 104kw (140HP)
• Conforms to AS1019-2000 Australian Standard
• Can be mounted horizontally or vertically
Part No. Inlet I/D Body Dia Length Outlet Size
SAA-515151mm 127mm
300mm 76mm
SAMA-5151* 500mm Deflector Stack
SAA-515757mm 127mm
300mm 76mm
SAMA-5157* 500mm Deflector Stack
SAA-516363mm 127mm
300mm 76mm
SAMA-5163* 500mm Deflector Stack
SAA-517676mm 127mm
300mm 76mm
SAMA-5176* 500mm Deflector Stack
* Spark Arrestor/Muffler Combination
Part No. Inlet I/D Power Rating Length
SATA-51 51mm 65HP 975mm
SATA-57 57mm 65HP 975mm
SATA-63 63mm 65HP 975mm
SATA-76 76mm 120HP 1025mm
• Primary used in agricultural applications
• Conform to Australian Standard AS1019.
PAGE 30
Aluminium Tube Mild Steel Tube
S/S Flexible Connectors 450mm Long Stainless Steel Flexible Exhaust
Stainless Steel Tube
Autoflex ‘Weld In’ Connectors
METALLIC TUBE
STAINLESS STEEL FLEXIBLE EXHAUST
Part No. O/D Gauge STD Length
190154102 102mm 1.6mm 3.25m
190154127 127mm 1.6mm 2.92m
190154152 152mm 1.6mm 2.92m
89665K 178mm 1.6mm 2.92m
89666K 203mm 1.6mm 2.92m
Part No. O/D Gauge STD Length
304SS025TUBE 25mm 1.6mm 3m
304SS032TUBE 32mm 1.6mm 3m
304SS038TUBE 38mm 1.6mm 3m
304SS044TUBE 44mm 1.6mm 3m
304SS051TUBE 51mm 1.6mm 3m
304SS063TUBE 63mm 1.6mm 3m
304SS076TUBE 76mm 1.6mm 3m
304SS089TUBE 89mm 1.6mm 3m
304SS102TUBE 102mm 1.6mm 3m
304SS127TUBE 127mm 1.6mm 3m
304SS152TUBE 152mm 2.0mm 3m
304SS203TUBE 203mm 2.0mm 3m
Part No. O/D Gauge STD Length
01038MST 38mm 1.6mm 3.05m
01044MST 44mm 1.6mm 3.05m
01051MST 51mm 1.6mm 3.05m
01057MST 57mm 1.6mm 3.05m
01063MST 63mm 1.6mm 2.92m
01070MST 70mm 1.6mm 3.05m
01076MST 76mm 1.6mm 2.92m
01089MST 89mm 1.6mm 2.92m
01102MST 102mm 1.6mm 2.92m
01114MST 114mm 1.6mm 2.92m
01127MST 127mm 1.6mm 2.92m
01140MST 140mm 1.6mm 2.92m
01152MST 152mm 1.6mm 2.92m
01178MST 178mm 1.6mm 2.92m
01203MST 203mm 2.0mm 2.92m
01254MST 254mm 2.0mm 2.92m
Part No. I/D Length Max. Bend
89778K 51mm 450mm 10°
89779K 63mm 450mm 10°
89785K 70mm 450mm 10°
89786K 76mm 450mm 10°
89787K 89mm 450mm 10°
89788K 102mm 450mm 10°
89789K 127mm 450mm 10°
89790K 152mm 450mm 10°
Part No. I/D LengthAUTOFLEX051200 51mm 200mm
AUTOFLEX057200 57mm 200mm
AUTOFLEX063200 63mm 200mm
AUTOFLEX076200 76mm 200mm
AUTOFLEX089200 89mm 200mm
AUTOFLEX102200 102mm 200mm
AUTOFLEX203200 203mm 200mm
Part No. I/D Bend Radius
SSF032 32mm 165mm
SSF038 38mm 188mm
SSF044 44mm 225mm
SSF051 51mm 230mm
SSF057 57mm 270mm
SSF063 63mm 280mm
SSF070 70mm 320mm
SSF076 76mm 360mm
SSF089 89mm 375mm
SSF102 102mm 450mm
SSF114 114mm 490mm
SSF127 127mm 525mm
SSF152 152mm 610mm
SSF203 203mm 800mm
SSF254 254mm 950mm
Specify -1 (1m length) or -3 (3m length) after part #
Specify “-1” at end of part No, for 1m length
PAGE 32
Part No. O/D Leg Length CLR
0503890 38mm 107mm 57mm
0504490 44mm 116mm 66mm
0505190 51mm 226mm 76mm
0505790 57mm 235mm 85mm
0506390 63mm 245mm 95mm
0507090 70mm 255mm 105mm
0507690 76mm 264mm 114mm0508990 89mm 333mm 133mm0510290 102mm 352mm 152mm
0511490 114mm 221mm 171mm
0512790 127mm 253mm 190mm
0512790 127mm 600x500mm 190mm
0515290 152mm 278mm 228mm
Centre Line Radius = 1.5 x O/D
Centre Line Radius = 1.5 x O/D
Centre Line Radius = 1.5 x O/D Centre Line Radius = 1.5 x O/D
Centre Line Radius = 1.0 x O/D
Centre Line Radius = 1.5 x O/D
Standard 90° Standard 45°
Expanded One End 90° Short Radius 90°
304 Grade 90° 304 Grade 45°
MILD STEEL ELBOWS
STAINLESS STEEL ELBOWS
Part No. O/D Leg Length CLR
0603845 38mm 82mm 57mm
0604445 44mm 87mm 66mm
0605145 51mm 182mm 76mm
0605745 57mm 185mm 85mm
0606345 63mm 189mm 95mm
0607045 70mm 194mm 105mm
0607645 76mm 197mm 114mm
0608945 89mm 255mm 133mm
0610245 102mm 263mm 152mm
0611445 114mm 121mm 171mm
0612745 127mm 134mm 203mm
0615245 152mm 144mm 228mm
O/D Mild Steel P/N
Chrome P/N
76mm 2207690X N/A
102mm 2210290X 2610290XC
127mm 2212790X 2612790XC
Part No. O/D Wall Thickness
05016006390SR 63mm 1.6mm
05016007690SR 76mm 1.6mm
05016010290SR 102mm 1.6mm
05016012790SR 127mm 1.6mm
05016015290SR 152mm 1.6mm
0517890* 178mm 2.0mm
0520390* 203mm 2.0mm
0525490* 254mm 2.5mm
* Donut section
Part No. O/D
304SS02590 25mm
304SS03890 38mm
304SS04490 44mm
304SS05190 51mm
304SS06390 63mm
304SS07690 76mm
304SS08990 89mm
304SS10290 102mm
304SS12790 127mm
304SS15290 152mm
304SS20390 203mm
Part No. O/D
304SS02545 25mm
304SS03845 38mm
304SS05145 51mm
304SS06345 63mm
304SS07645 76mm
304SS08945 89mm
304SS10245 102mm
304SS12745 127mm
304SS15245 152mm
304SS20345 203mm
PAGE 33
Large bore rain caps fabricated
for sizes 203mm - 500mm
Centre Line Radius = 1.0 x O/D Centre Line Radius = 1.0 x O/D
Centre Line Radius = 1.0 x O/D
Aluminium Donuts Mild Steel Donuts
Zinc Plated Silent Raincaps Heavy Duty Painted Raincaps
304 Stainless Steel Raincaps Large Bore Rain Caps
EXHAUST DONUTS
EXHAUST RAIN CAPS
Stainless Steel Donuts
Part No. O/D Gauge
07ALD102 102mm 2.0mm
07ALD127 127mm 2.0mm
07ALD152 152mm 3.0mm
Part No. O/D Gauge
07SS076D 76mm 2.0mm
07SS102D 102mm 2.0mm
07SS152D 127mm 2.0mm
Part No. O/D Gauge
07051D 51mm 1.6mm
07057D 57mm 1.6mm
07063D 63mm 1.6mm
07076D 76mm 2.0mm
07089D 89mm 2.0mm
07102D 102mm 2.0mm
07114D 114mm 2.0mm
07127D 127mm 2.0mm
07152D 152mm 3.0mm
07203D 203mm 2.0mm
07254D 254mm 2.0mm
Part No. Suit Tube O/D
04038RC 38mm
04044RC 44mm
04051RC 51mm
04057RC 57mm
04063RC 63mm
04076RC 76mm
04089RC 89mm
04102RC 102mm
04114RC 114mm
04127RC 127mm
04140RC 140mm
04152RC 152mm
Part No. Suit Tube O/D
11031 25mm
11033 38mm
11035 51mm
11037 63mm
11039 76mm
11041 89mm
11043 102mm
11015 114mm
11017 127mm
11019 140mm
11021 152mm
11086 178mm
11046 203mm
Part No. Suit Tube O/D
SRC200SS 51mm
SRC250SS 63mm
SRC300SS 76mm
SRC350SS 89mm
SRC400SS 102mm
SRC500SS 127mm
PAGE 34
S/S Lap Torctite Clamp (Stepped) S/S Butt Torctite Clamp
Flatband Seal Clamps Zinc Plated Exhaust U-Bolt Clamps
Muffler Body Clamps Universal Brackets
Rubber Mounts H/D Muffler Bracket
EXHAUST CLAMPS
EXHAUST MOUNTING
Part No. Tube Size
90360A 51mm
90361A 57mm
90362A 63mm
90363A 70mm
90364A 76mm
90365A 89mm
90366A 102mm
90367A 114mm
90368A 127mm
90369A 152mm
Part No. Tube Size
90380A 51mm
90381A 57mm
90382A 63mm
90383A 70mm
90384A 76mm
90385A 89mm
90386A 102mm
90387A 114mm
90388A 127mm
90389A 152mm
Accuseal Exhaust Clamp
Part No. Size
X004482 102mm
X004484 127mm
X004539 152mm
Part No. Size Band Width
90869A 51mm 32mm
90870A 57mm 32mm
90871A 63mm 32mm
90872A 70mm 32mm
90873A 76mm 32mm
90874A 89mm 32mm
90875A 102mm 32mm
90876A 114mm 32mm
90877A 127mm 32mm
90878A 152mm 32mm
Part No. Size U Bolt Dia.
290161CZ038 38mm 3/8"
290161CZ045 45mm 3/8"
290161CZ051 51mm 3/8"
290161CZ057 57mm 3/8"
290161CZ063 63mm 3/8"
290161CZ076F** 76mm 3/8"
290161CZ089F** 89mm 3/8"
89558B** 102mm 3/8"
290161CZ114 114mm 3/8"
89559B** 127mm 3/8"
90161K 140mm 3/8"
89560B** 152mm 3/8"
290161CZ178F** 178mm 3/8"
290161CZ203 203mm 3/8"
CH254 254mm 3/8"
**Designates Flat band, all others are round band
Part No. Diameter Band Width
M002117 152mm 32mm
M002118 168mm 32mm
M002119 216mm 32mm
M002120 229mm 32mm
M002121 256mm 32mm
M002122 281mm 32mm
M002123 301mm 32mm
Part No. I/D
UBC90 90mm
UBC100 100mm
UBC125 125mm
UBC150 150mm
UBC175 175mm
UBC200 200mm
UBC235 230mm
Part No. Thread Diameter
BLT001 M10 51mm
BLT003 M10 57mm
Part No. Suit Body Dia
MB10X15 254mm x 380mm
Centre Line Radius = 1.0 x O/D
Aluminium Donuts Mild Steel Donuts
304 Stainless Steel Raincaps Large Bore Rain Caps
PAGE 35
O/D - O/D Adaptor I/D - I/D Adaptor
Single Couplers Tube Coupler
S/S Plain Lipped Flange Mild Steel Expanded Lipped Flange
MILD STEEL TUBE ADAPTORS
MILD STEEL COUPLERS
20° LIPPED FLANGES
Part No. O/D - O/D Overall Length
11038051A 38mm-51mm 102mm
11051057A 51mm - 57mm 127mm
11051063A 51mm - 63mm 127mm
11051076A 51mm - 76mm 135mm
11057063A 57mm - 63mm 130mm
11063076A 63mm - 76mm 130mm
11076089A 76mm - 89mm 127mm
11076102A 76mm - 102mm 127mm
11076102SS 76mm - 102mm 127mm**
11089102A 89mm - 102mm 127mm
11102127A 102mm - 127mm 127mm
11110127A 110mm - 127mm 127mm
11114127A 114mm - 127mm 127mm
11127152A 127mm - 152mm 127mm
** Stainless Steel
** Stainless Steel
Part No. I/D - I/DOverall Length
21051057XA 51mm - 57mm 127mm
21051063XA 51mm - 63mm 127mm
21051076XA 51mm - 76mm 135mm
21057063XA 57mm - 63mm 130mm
21057076XA 57mm - 76mm 135mm
21063070XA 63mm - 70mm 135mm
21063076XA 63mm - 76mm 130mm
21076089XA 76mm - 89mm 127mm
21076102XA 76mm - 89mm 127mm
21089102XA 76mm - 102mm 127mm
21102114XA 102mm - 114mm 127mm
21102127XA 102mm - 127mm 127mm
21110127XA 110mm - 127mm 127mm
21114127XA 114mm - 127mm 127mm
21127140XA 127mm - 140mm 127mm
21127152XA 127mm - 152mm 127mm
Part No. I/D - O/D Overall Length
09051SC 51mm 100mm
09057SC 57mm 100mm
09063SC 63mm 100mm
09076SC 76mm 102mm
09089SC 89mm 102mm
09102SC 102mm 105mm
09127SC 127mm 102mm
09127SCSS 127mm 102mm **
09152SC 152mm 102mm
Part No. I/D - I/D Overall Length
08051TC 51mm 127mm
08057TC 57mm 127mm
08063TC 63mm 127mm
08076TC 76mm 127mm
08089TC 89mm 127mm
08102TC 102mm 127mm
08114TC 114mm 127mm
08127TC 127mm 127mm
08SS127TC 127mm 127mm **
08152TC 152mm 127mm
Part No. Suit Tube Size Lip O/D Length
020111LX063 63mm 80mm 70mm
020111LX070 70mm 87mm 80mm
020111LX076 76mm 91mm 80mm
020111LX089 89mm 105mm 75mm
020111LX102 102mm 119mm 82mm
020111LX114 114mm 131mm 80mm
020111LX127 127mm 144mm 80mm
Part No.Suit Tube Size
Lip O/D Length
020111LX063 63mm 80mm 70mm
020111LX076 76mm 91mm 78mm
020111LX102 102mm 119mm 78mm
020111LX127 127mm 144mm 80mm
PAGE 36
S/S Machined Flange Kits Steel Bolt Flanges/Gaskets
Machined Turbo Flanges RTV Silicone Gasket Maker
Aluminised Splitter Tee (Y Piece) Mild Steel U Bend
EXHAUST FLANGES & GASKETS
MISC. EXHAUST COMPONENTS
EXHAUST DIRECTIONAL FLOW
Part No. Centre Hole
2BF051 51mm
2BF063 63mm
2BF076 76mm
Part No. Centre Hole
2BG051 51mm
2BG063 63mm
2BG076 76mm
Part No. Size Max Temp.
PST900 300gm 370°C.
Part No. Centre Hole
3BF063 63mm
3BF076 76mm
Part No. Centre Hole
3BG063 63mm
3BG076 76mm
Part No. Size
FK063 63mm
FK070 70mm
FK076 76mm
FK089 89mm
FK102 102mm
FK127 127mm
Part No. O/D - I/D
10076Y 76mm
89940A 102mm
89950A 127mm
Part No. Dia. CLR
07051UB 51mm 76mm
07063UB 63mm 95mm
07076UB 76mm 114mm
07102UB 102mm 153mm
Part No. Turbo Tube Size
88-487 Air Research 102mm or 127mm
88-587 Cummins 89mm
88-487 88-587
PAGE 37
V-BAND CLAMPS
V-Band Clamps are used for fastening Lip Flanges to turbo charger
outlets. The dimensions of the V are critcal to the clamp’s
performance and security of the joint.
Part No. Tube O.D* Typical App A B C D E F Max Flange
O.D
89500K 3" Cummins V903 40° 99mm 10mm 22mm 7mm 1mm 96mm
89501K 3.5" Cummins VT555 40° 108mm 10mm 22mm 7mm 1mm 106mm
89502K 4" Switzer 4LDE, 4LE, 4LH, 4LS 40° 114mm 7mm 19mm 4mm 1mm 112mm
89503K 5" Cummins T50 Turbo, M-11 40° 149mm 10mm 22mm 7mm 1mm 147mm
89505K 3" DD 6V71 40° 97mm 5mm 22mm 7mm 2mm 94mm
89506K 3.5" DD8V71 40° 108mm 10mm 22mm 7mm 1mm 106mm
89507K 4" DD 6-71 40° 125mm 7mm 29mm 8mm 2mm 122mm
89508K 4" DD 8.2N 40° 103mm 6mm 22mm 7mm 2mm 100mm
89509K 4" DD 8.2T GM 2295978 40° 121mm 4mm 22mm 8mm 2mm 118mm
89510K 4.88" DD 8V71T, 6V92T, 8V92T 40° 133mm 7mm 19mm 4mm 1mm 131mm
89511K 3.13" OE Muffler 40° 101mm 5mm 22mm 7mm 2mm 98mm
89512K 3.5" IH DT466 & Connector Ends 40° 109mm 5mm 22mm 7mm 2mm 106mm
89513K 4" Connector Ends 40° 122mm 5mm 22mm 7mm 2mm 119mm
89514K 5" Connector Ends 40° 148mm 5mm 22mm 7mm 2mm 145mm
89520K 4" Cat 3126T,3176T. Cummins 40° 121mm 10mm 25mm 7mm 1mm 118mm
89530K 3" Ford D9HT-51210-DA 40° 99mm 11mm 22mm 8mm 2mm 95mm
89531K 3.5" Cat 3208T Ford 6.6,7.8 40° 106mm 10mm 22mm 7mm 1mm 103mm
89532K 4" Mack 11ME29 40° 126mm 5mm 19mm 7mm 2mm 122mm
89533K 4" Mack 48RU2341 40° 117mm 4mm 19mm 6mm 1mm 114mm
89571K 2.75" Cummins B 40° 82mm 7mm 22mm 4mm 1mm 80mm
89573K 3.5" Cummins C 40° 105mm 7mm 17mm 4mm 1mm 102mm
90528K 2.75" Ford 8.2N 40° 105mm 5mm 19mm 7mm 1mm 102mm
90530K 5" DD 8V71 Special Manifold 40° 149mm 9mm 22mm 8mm 1mm 146mm90531K 5.25" DD 8V71 40° 150mm 7mm 22mm 7mm 2mm 148mm
90603K 2.5" DD 8.2T 8920206 40° 73mm 5mm 19mm 7mm 1mm 70mm
*Do not use this diameter to select V-Band Clamp. It refers to a typical exhaust tube size which can vary.
Note: Nelson V-Bands manufactured from Type 321 stainless steel
** Stainless Steel
PAGE 38
*Expanded Inlet Version (127mm I/D)
CHROME PLATED STACKSDeflectors - Plain Inlet Deflectors - Expanded Inlet
Straight Stacks Reducing Deflectors (152mm/127mm) - Plain Inlet
Part No. Inlet O/D Length
76mm180760900CPD 76mm 900mm
180761200CPD 76mm 1200mm
89mm180890900CPD 89mm 900mm
180891200CPD 89mm 1200mm
102mm181020600CPD 102mm 600mm
181020900CPD 102mm 900mm
181021200CPD 102mm 1200mm
181021500CPD 102mm 1500mm
181021800CPD 102mm 1800mm
114mm181140900CPD 114mm 900mm
181141200CPD 114mm 1200mm
181141500CPD 114mm 1500mm
127mm181270600CPD 127mm 600mm
181270900CPD 127mm 900mm
181271200CPD 127mm 1200mm
181271500CPD 127mm 1500mm
181271800CPD 127mm 1800mm
152mm181521200CPD 152mm 1200mm
181521500CPD 152mm 1500mm
Part No. Inlet I/D Length
76mm180760900CXD 76mm 900mm
180761200CXD 76mm 1200mm
180761500CXD 76mm 1500mm
180761800CXD 76mm 1800mm
89mm180890900CXD 89mm 900mm
180891200CXD 89mm 1200mm
180891800CXD 89mm 1800mm
102mm181020600CXD 102mm 600mm
181020900CXD 102mm 900mm
181021200CXD 102mm 1200mm
181021500CXD 102mm 1500mm
181021800CXD 102mm 1800mm
127mm181270600CXD 127mm 600mm
181270900CXD 127mm 900mm
181271200CXD 127mm 1200mm
181271500CXD 127mm 1500mm
181271800CXD 127mm 1800mm
152mm181520900CXD 152mm 900mm
181521200CXD 152mm 1200mm
181521500CXD 152mm 1500mm
181521800CXD 152mm 1800mm
Plain Inlet Part No.
Expanded Inlet Part No. Length
102mm
89013C 89025C 600mm
89014C 89026C 900mm
89015C 89027C 1200mm
89205C 89217C 1500mm
89916C 89919C 1800mm
127mm
89016C 89028C 600mm
89017C 89029C 900mm
89018C 89030C 1200mm
89019C 89031C 1500mm
89918C 89920C 1800mm
152mm
181521500CPS N/A 1500mm
Part No. Inlet O/D Length
181271520600CPD 127mm 600mm
181271520900CPD 127mm 900mm
181271521200CPD 127mm 1200mm
181271521200CXD* 127mm 1200mm
181271521500CPD 127mm 1500mm
PAGE 39
STAINLESS STEEL MUFFLER GUARDS
STAINLESS STEEL DG TANKER KITS
Full Muffler Guards - 360°
Half Muffler Guards - 180°
Pipe Shroud Kits (3 Segment Kit) Flame Proof Tanker Kits
US Style Muffler Guards - 180° US Style Muffler Guards - 270°
1/2 Guard Mounts (2/kit) 3/4 Guard Mounts (2/kit)
Part No. Diameter Pipe Size Length
162031219102FG 203mm 102mm 1219mm
162031219127FG 203mm 127mm 1219mm
162541219102FG 254mm 102mm 1219mm
162791219102FG 279mm 102mm 1219mm
162791219127FG 279mm 127mm 1219mm
163051219127FG 305mm 127mm 1219mm
163051219152FG 305mm 152mm 1219mm Note: Comes with mounting brackets
Part No. Diameter Style Length
89747C 216 – 267mm 20mm Hole 1219mm
89996C 216 – 267mm Horizontal Slot 1219mm
89745C 216 – 267mm Vertical Slot 1219mm
Part No. Diameter Style Length
89749C 216 – 257mm 20mm Hole 1219mm
89774C 216 – 257mm Horizontal Slot 1219mm
89995C 216 – 257mm Blank Pattern 1219mm
Part No. Diameter
89761K 216mm
89762K 229mm
89763K 257mm
89764K 265mm
Part No. Diameter
89766K 229mm
89767K 257mm
Note: 3 standoffs Note: 4 standoffs
Part No. Suit Tube O/D Diameter Length
130134TSL102 102mm 203mm 2290mm
130134TSL127 127mm 229mm 2290mm
Part No. Suit Pipe Dia.
Overall Length
Dia. Bottom
Dia. Top
13102TK 102mm 2120mm 355mm 205mm
13127TK 127mm 2120mm 355mm 230mm
13152TK 152mm 2120mm 355mm 230mm
Part No. Diameter Pipe Size Length
172031219102HG 203mm 102mm 1219mm
172031219127HG 203mm 127mm 1219mm
172541219102HG 254mm 102mm 1219mm
172541219127HG 254mm 127mm 1219mm
173051219102HG 305mm 102mm 1219mm
173051219127HG 305mm 127mm 1219mm
173051219152HG 305mm 152mm 1219mm Note: Comes with mounting brackets
PAGE 40
NELSON GLOBAL STANDARD LINE MUFFLERSType 1 Muffler - End In / Opposite End Out - Both On Centre
Type 1 Muffler - Resonator
Part No.Inlet ID Outlet ID Body Size Body Length Max Flow
A B C D 3" Hg CFM
86177M 51mm 51mm 106mm 322mm 400
86186M 63mm 63mm 156mm 533mm 860
86187M 76mm 76mm 156mm 533mm 1100
20153T 76mm 76mm 203mm 310mm 750
M730-300A 76mm 76mm 178mm 760mm -
86690M 80mm 80mm 256mm 597mm 1000
86113M 89mm 89mm 229mm 1130mm 1200
86108M 102mm 102mm 229mm 1130mm 1600
86111M 102mm 102mm 229mm 1130mm 1230
86127M 102mm 102mm 216mm 874mm 2000
86131M 102mm 102mm 229mm 1130mm 2000
86560M 102mm 102mm 229mm 508mm 2000
86561M 102mm 102mm 229mm 711mm 1875
86544M 102mm 102mm 257mm 1130mm 1600
20620T 112mm 114mm 229mm 452mm 1705
86102M 127mm 127mm 229mm 1130mm 2160
86132M 127mm 127mm 229mm 1130mm 3600
86130M 127mm 127mm 257mm 1130mm 2300
86195M 127mm 127mm 257mm 1130mm 2800
86531M 127mm 127mm 257mm 1130mm 2800
86656M 127mm 152mm 257mm 1130mm 3400
86610M 152mm 152mm 282mm 1130mm 3700
Part No.Inlet ID Outlet ID Body Size Body Length Inlet Length
A B C D E86144M 102mm 102mm 229mm 292mm 64mm
86145M 127mm 127mm 229mm 292mm 64mm
Pipe Shroud Kits (3 Segment Kit)
PAGE 41
NELSON GLOBAL STANDARD LINE MUFFLERSType 2 Muffler - End In / Opposite End Out - Both Offset
Type 3 Muffler - End In / End Out - Same End
Type 5 Muffler - Side In / End Out
Part No. Inlet ID Outlet ID Body Size Body Length Max Flow Max FlowA B C D 3" Hg CFM 2" Hg CFM
ROUND86136M 51mm 51mm 155mm 610mm 500 420
86550M 57mm 57mm 155mm 655mm 410 330
86137M 64mm 64mm 168mm 711mm 800 670
86139M 76mm 76mm 216mm 792mm 1150 960
86119M 76mm 76mm 216mm 706mm 1000 835
86118M 102mm 102mm 257mm 914mm 1600 1350
86168M 102mm 102mm 267mm 851mm 1650 1375
OVAL86206M 89mm 89mm 213x295mm 660mm 1500 1250
86125M 102mm 102mm 254x381mm 660mm 1750 1460
86147M 127mm 127mm 254x381mm 660mm 2950 2500
86117M 127mm 127mm 254x381mm 914mm 2600 2170
86180M 152mm 152mm 254x381mm 805mm 3800 3170
Part No.Inlet ID Outlet ID Body Dia. Body Length OAL Max Flow @ 3" Hg
A B C D E CFM86115M 102mm 102mm 254x380mm 660mm 1600 1350
86133M 102mm 102mm 257mm 711mm 1700 1420
86121M 128mm 127mm 254x381mm 660mm 2200 1850
Part No.Inlet ID Outlet ID Body Dia. Body Length Overall Length Max Flow @ 3" Hg Clock Position
A B C D E CFM Inlet Outlet86190M 51mm 51mm 156mm 477MM 546MM 350 6 3
86191M 63mm 63mm 167mm 528mm 597mm 640 6 3
86192M 76mm 76mm 216mm 687mm 750mm 860 6 3
86193M 89mm 89mm 210x292mm 660mm 741mm 1100 9 12
86194M 127mm 127mm 254x381mm 914mm 1016mm 2200 9 12
86570M 127mm 127mm 254x381mm 757mm 686mm 2800 5.3 11
86148M 102mm 102mm 257mm 711mm 774mm 1960 6 1
PAGE 42
THERMAL INSULATION PRODUCTSFibreglass Lagging Tape
Silicone Heat Sleeve
Heat Shield Sheet
Exhaust Blankets
• Reduces external surface temperature by as much as 500°C
• Ease of installation. These blankets are easily removable and can be transferred between vehicles
• Reduced heat transfer into building and/or equipment enclosure
• Increased safety and comfort for both operator and maintenance personnel
• Radiated sound reduction by as much 3dB
Part No. Width Thickness Temp Rating
Standard Fibreglass
FLT051 51mm 3mm 0-500°C
FLT076 76mm 3mm 0-500°C
FLT102 102mm 3mm 0-500°C
FLT127 127mm 3mm 0-500°C
Silicone Cover
FLT076_SILICONE 76mm 3mm 0-500°C
Foil Cover
FLT076_FOIL 76mm 3mm 0-500°C
High Temp Basalt
FLT076_BASALT 76mm 3mm 0-800°C
Temp Resistance
Part No. I/D. O/D Roll Length Silicone Fibreglass
SHS013 13 21 15m* 260ºC 600ºC
SHS019 19 28 15m* 260ºC 600ºC
SHS025 25 34 15m* 260ºC 600ºC
SHS051 38 48 15m* 260ºC 600ºC
SHS051 51 59 15m* 260ºC 600ºC
SHS076 76 84 15m* 260ºC 600ºC
SHS089 89 98 15m* 260ºC 600ºC
SHS0102 102 101 15m* 260ºC 600ºC
*Minimum cut 1m, sold in increments of 1m
Part No. Description Max Temp Thickness
HD5000 - 1000 1000mm x 560mm 900°C 3.5mm
HD5000 - 1500 1500mm x 560mm 900°C 3.5mm
Note: Six layer aluminium material
Part No.Inlet ID Outlet ID Body Dia. Body Length OAL Max Flow @ 3" Hg
A B C D E CFM86115M 102mm 102mm 254x380mm 660mm 1600 1350
86133M 102mm 102mm 257mm 711mm 1700 1420
86121M 128mm 127mm 254x381mm 660mm 2200 1850
PAGE 43
FLANGED EXHAUST BELLOWS
Australian Standard Slip on Flanges
KLINGER EXHAUST GASKETSPart No. Size N/B O/D PCD No.Holes Table
K0022707/0 50 150mm 114mm 4 D
K0022708/0 65 165mm 127mm 4 D
K0022709/0 80 185mm 146mm 4 D
K0022710/0 100 215mm 178mm 4 D
K0022711/0 100 215mm 178mm 8 E
K0022712/0 125 255mm 210mm 8 D/E
K0022713/0 150 280mm 235mm 8 D
K0022714/0 200 335mm 292mm 8 D
K0022715/0 250 405mm 356mm 8 D
K0022716/0 300 455mm 406mm 12 D
K0022719/0 219 280mm 251mm 8 SPECIAL
K0029298/0 150 203mm 182mm 8 SPECIAL
K0031938/0 SHEET 500x500mm N/A
Fixed Flange Fixed/Floating Flange Floating Flanges
Combination Flanges Fixed Flange with End Spacer Fixed Flange with Middle Spacer
Size Standard Class Diameter PDC Bolt Holes Bolt Size50mm (2")
AS 2129
Table D,E 150 114 4 M16
65mm (2.5") Table D,E 165 127 4 M16
80mm (3") Table D,E 185 146 4 M16
100mm (4") Table D 215 178 4 M16
100mm (4") Table E 215 178 8 M16
125mm (5") Table D 255 210 8 M16
125mm (5") Table E 255 210 8 M16
150mm (6") Table D 280 235 8 M16
150mm (6") Table E 280 235 8 M20
200mm (8") Table D 335 292 8 M16
200mm (8") Table E 335 292 8 M20
250mm (10") Table D 405 356 8 M20
250mm (10") Table E 405 356 12 M20
300mm (12") Table D 455 406 12 M20
300mm (12") Table E 455 406 12 M22
350mm (14") Table D 525 470 12 M22
350mm (14") Table E 525 470 12 M22
PAGE 44
FABRICATION WORKSHOPTube/Pipe Fabrication
Silencer Fabrication
The metal fabrication division specialises in metal cylindrical tube
and pipe fabrication. With the resources and technological backing
from the globally renowned Universal AET, Engine Protection
Fabrication are able to cater to Australia’s largest air silencing
projects. From concept to completion, Engine Protection Fabrication
offer Complete Exhaust System Integration.
FABRICATION EXAMPLES:• Exhaust Systems from 0.25” diameter and up
• Coolant Tubes
• Wet exhaust mixers/risers
• Air Intake Pipework
• Bespoke Flanged Exhaust Bellows
DATA REQUIRED: • Engine exhaust flow (CFM)
• Exhaust temperature (˚F)
• Maximum back pressure
• Silencer inlet size (mm)
• Level of silencing required
"100" Level12 - 18db exhaust noise reductions - for non critical environments where
ambient noise levels are moderate to high.
"200" Level18 - 25db exhaust noise reduction - for residential environments where
ambient noise levels are moderate to low.
"300" Level25 - 35db exhaust noise reduction - for critical environments where ambient
noise levels are low.
"400" Level 35 - 45db exhaust noise reduction - for ultra critical applications.
Fixed Flange Fixed/Floating Flange Floating Flanges
PAGE 45
UNIVERSAL CUSTOM SILENCERS
QuietShield Series
BSE Series SPA Series
OPA Series BSA Series
EPE hold a unique licence agreement with Universal AET which allows the majority of
Universal’s range to be fabricated locally by EPE under their strict manufacturing guidelines.
Universal’s technologically advanced designs coupled with EPE’s industry leading fabrication
standards results in a well made and efficient silencer every time.
Quietshield Silencers are perfect for applications where space is at a
premium but noise attenuation/performance cannot be compromised.
Attenuation Levels Available: 25dB / 35dB / 42dB / 50dB
FEATURES:• 20–25% Smaller Size
• 50% Reduced Engine Backpressure
• 35% Better Acoustic Performance
• Built-in insulation models available
• Dual inlet options available
Recommended for optimum silencing applications
as they incorporate both a reactive chamber
and absorptive chamber to treat low and high
frequencies.
CONFIGURATION: End Entry/End Exit or
Side Entry/End Exit
SILENCING METHOD: Reactive/Absorptive
ATTENUATION LEVELS AVAILABLE: 25dB / 35dB / 45dB
Unique non restrictive design allows dangerous
sparks to be removed from the exhaust gas as well
as providing up to 20dB attenuation.
CONFIGURATION: End Entry/End Exit or
Side Entry/End Exit
SILENCING METHOD: Spark Arrestor
ATTENUATION LEVELS AVAILABLE: Up to 20dB
Range of spark arresting silencers designed for
industrial or marine applications where low
frequency noise dominates.
CONFIGURATION: End Entry/End Exit or
Side Entry/End Exit
SILENCING METHOD: Spark Arrestor/Reactive
ATTENUATION LEVELS AVAILABLE: 25dB / 30dB
Spark arresting silencers for optimum silencing
applications as they incorporate a reactive chamber
and an absorptive chamber.
CONFIGURATION: End Entry/End Exit or
Side Entry/End Exit
SILENCING METHOD: Spark Arrestor/
Reactive/Absorptive
ATTENUATION LEVELS AVAILABLE: 25dB / 35dB / 45dB
Cylindrical Low-Profile Puck
PAGE 46
EMISSION TREATMENT PRODUCTS
BLOWER SILENCERS
VENT SILENCERS
UCI Series
UCD /URB / URD Series
RIS Series
SD / RD Series
Universal AET has extensive technical experience helping OEM and end-users
to meet the increasing local and global emission requirement in stationary
applications for carbon (CO), and unburned hydrocarbons (HC) reduction
PRODUCT RANGE:• Catalysts and Combination Catalyst Silencers
• Diesel, Natural Gas or Bi-Fuel Applications
• 300kW and Larger Engines or Generator Sets
• Standard Catalog and Custom Designs Available
• Multiple Material Options Including: Carbon Steel, 304L and 316SS
Range of both Inlet and Discharge silencers designed
specifically for use on Rotary Positive Blowers.
Inlet Silencer Chamber-type inlet silencer for use on
subcritical PLV applications. Available in pipe sizes 8”–30”.
Discharge Silencers Chamber-type discharge silencer for use
on sub-critical PLV applications. Available in pipe sizes 8”–30”
Inlet Silencer Combustion chamber-absorptive type inlet silencer
for critical PLV applications. Available in pipe sizes 2”–30”
Discharge Silencers Combination chamber-absorptive type
discharge silencers for critical PLV applications.
Available in pipe sizes 2”–30”
HV Series vent silencers effectively silence high velocity air,
steam, and gas vents and blowdowns to atmosphere where
sonic or critical conditions exist in the valve.
APPLICATIONS:• Steam boiler relief valves
• Superheater header relief valves
• Boiler start up and purge
• High-pressure air vents
• Natural gas blow downs
• Switch valves
• Compressor
blowoffs
• Autoclaves
• Steam ejectors
PAGE 47
Exhaust Dia. 38mm 51mm 63mm 76mm 89mm 102mm 127mm 152mm 203mm 254mm 305mm 356mm
Petrol 30 60 110 160 220 280 370 440 N/A
Diesel 10 25 40 60 85 125 210 280 420 680 900 1150
* General Recommendation Only
MAXIMUM HP SIZING GUIDE*
CENTEK WET EXHAUST PRODUCTSProduct Selection Criteria
Vernatube - Fibreglass Tube
Part No. O/D Wall Thickness Weight Length
1100512 51mm 3.2mm 0.34kg 1m
1100501 64mm 3.3mm 0.47kg 1m
1100502 76mm 3.3mm 0.60kg 1m
1100504 102mm 3.5mm 0.87kg 1m 3m
1100506 127mm 3.7mm 1.14kg 1m 3m
1100507 152mm 3.8mm 1.34kg 1m 3m
1100508 203mm 3.9mm 2.02kg 1m 3m
1100509 254mm 4.1mm 2.55kg 1m 3m
1100515 305mm 4.1mm 3.09kg 1m 3m
1100514 356mm 5.1mm 4.37kg 1m
Step 1. ENGINE LOCATIONEngines located at or below the loaded water line (LWL) require some type of a lift
muffler, (Vernalift). Engines located aft or mid ship and above the LWL can utilize a
muffler of the Vernatone family.
Step 2. EXHAUST SYSTEM SIZE (Diameter)The muffler nd accompanying fittings must be large enough to carry the cooling water
and gases through the system without creating back pressure in excess of the engine
manufacturer’s recommendations.
Step 3. NOISE REDUCTIONMuffler size and internal design will determine the amount of noise reduction
achievable in a given installation. Larger mufflers normally provide better silencing than
small mufflers. Space limitations for installations will often determine the size and type
of muffler that can be used.
Step 4. EXHAUST SYSTEM SIZEThe size of the wet marine exhaust muffler is determined by the engine size (H.P.) and
the engine manufacturer’s allowable back pressure. Diesel engines are particularly
sensitive to back pressure.
PAGE 48
CENTEK MUFFLER SPECIFICATIONSVernatone Round - Above Water
Vernatone MK II Round - Above Water
Vernatone MK II Oval - Above Water
Vernalift Top In/Out - Above Or Below Water
Mini Max Siliencer - Above Water
Vernalift Side In/Top Out - Above Or Below Water
Part No. In/Out Dia I/O Length Length Diameter
1050500W 127mm 89mm 527mm 213mm
1050600W 152mm 102mm 635mm 255mm
Part No. In/Out Dia I/O Length Length Diameter
1000104W 76mm 89mm 656mm 180mm
1000106W 102mm 89mm 856mm 230mm
1000108W 127mm 112mm 984mm 279mm
1000111W 152mm 127mm 1054mm 310mm
1000119W 203mm 152mm 1340mm 413mm
Part No. In/Out Dia I/O Length Length Diameter I/O Offset
1400006W 127mm 127mm 800mm 255mm 55mm
1400007W 152mm 152mm 965mm 318mm 72mm
1400008W 203mm 203mm 1283mm 413mm 94mm
1400009W 254mm 254mm 1600mm 470mm 98mm
Part No. In/Out Dia I/O Length Length Height Width
1400044W 203mm 203mm 1283mm 483mm 305mm
1400045W 254mm 254mm 1600mm 622mm 368mm
Part No. In/Out Dia Diameter Height SQ.Base
1500060W 38mm 212mm 203mm 229mm
1500008W 51mm 162mm 156mm 216mm
1500009W 51mm 212mm 203mm 229mm
1500141W 64mm 313mm 305mm 305mm
1500017W 76mm 255mm 258mm 267mm
1500064W 89mm 313mm 305mm 305mm
1500069W 152mm 411mm 406mm 432mm
Part No. In/Out Dia Diameter Height SQ.Base
1500071W 38mm 212mm 203mm 229mm
1500027W 51mm 255mm 258mm 267mm
1500128W 64mm 313mm 305mm 305mm
1500034W 76mm 255mm 258mm 267mm
1500085W 76mm 313mm 305mm 305mm
1500087W 89mm 313mm 305mm 305mm
1500088W 102mm 313mm 305mm 305mm
1500090W 127mm 411mm 406mm 432mm
PAGE 49
& C L A M P S
SILICONE WET EXHAUST HOSE (180°C)Silicone Wet Exhaust - Straight Hose
Silicone Wet Exhaust - Double Hump Hose
Silicone Wet Exhaust - Single Hump Hose
Silicone Wet Exhaust - 45° Elbow
Silicone Wet Exhaust - 90° Elbow
Recommended
Part No. ID OD Length Plys T-Bolt Clamp 70MAR-0400 102mm 112mm 1m 4 94106-0450
70MAR-0500 127mm 137mm 1m 4 94106-0550
7060MAR-0600 152mm 165mm 1m 6 94106-0650
7060MAR-0800 203mm 217mm 1m 6 94106-0850
7060MAR-1000 254mm 268mm 1m 6 94106-1050
7060MAR-1200 305mm 320mm 1m 6 94106-1250
7060MAR-1400 356mm 371mm 1m 6 Please Contact
Recommended
Part No. ID OD Length Plys T-Bolt Clamp 76DMAR-0400-14 102mm 112mm 355mm 4 94106-0450
76DMAR-0500-14 127mm 137mm 355mm 4 94106-0550
76DMAR-0600-14 152mm 165mm 355mm 6 94106-0650
76DMAR-0800-14 203mm 217mm 355mm 6 94106-0850
76DMAR-1000-14 254mm 268mm 355mm 6 94106-1050
76DMAR-1200-14 305mm 320mm 355mm 6 94106-1250
76DMAR-1400-14 356mm 371mm 355mm 6 Please Contact
Recommended
Part No. ID OD Length Plys T-Bolt Clamp76SMAR-0400-6 102mm 112mm 150mm 4 94106-0450
76SMAR-0500-6 127mm 137mm 150mm 4 94106-0550
76SMAR-0600-8 152mm 165mm 205mm 6 94106-0650
76SMAR-0800-8 203mm 217mm 205mm 6 94106-0850
76SMAR-1000-12 254mm 268mm 310mm 6 94106-1050
76SMAR-1200-14 305mm 320mm 355mm 6 94106-1250
76SMAR-1400-14 356mm 371mm 355mm 6 Please Contact
Recommended
Part No. ID OD Leg Length Plys T-Bolt Clamp
9046MAR-0500-MK 127mm 137mm 152 x 152mm 4 94106-0550
9066MAR-0600-01 152mm 163mm 210 x 210mm 6 94106-0650
9066MAR-0800-01 203mm 215mm 254 x 254mm 6 94106-0850
9066MAR-1000-01 254mm 267mm 305 x 305mm 6 94106-1050
Recommended
Part No. ID OD Leg Length Plys T-Bolt Clamp
9048MAR-0500-MK 127mm 137mm 152mm x 152mm 4 94106-0550
9068MAR-0600-01 152mm 163mm 210mm x 210mm 6 94106-0650
9068MAR-0800-01 203mm 215mm 254mm x 254mm 6 94106-0850
9068MAR-1000-01 254mm 267mm 305mm x 305mm 6 94106-1050
PAGE 51
SILICONE COOLANT HOSE (180°C)Silicone Coolant/Radiator Hose - 4Ply
Purosil Silicone Hose Reducers
Recommended ClampPart No. ID OD Breeze# C.Torque# Plys70-050 13mm 24mm 9408 CT9412LSS 4
70-075 19mm 30mm 9412 CT9420LSS 4
70-087 22mm 32mm 9416 CT9420LSS 4
70-100 25mm 37mm 9416 CT9420LSS 4
70-112 28mm 39mm 9420 CT9420LSS 4
70-125 32mm 42mm 9420 CT9420LSS 4
70-138 35mm 45mm 9420 CT200LSS 4
70-150 38mm 48mm 9424 CT200LSS 4
70-162 41mm 52mm 9428 CT250LSS 4
70-175 44mm 54mm 9428 CT250LSS 4
70-187 48mm 57mm 9432 CT250LSS 4
70-200 51mm 62mm 9432 CT250LSS 4
70-212 54mm 64mm 9436 CT250LSS 4
70-225 57mm 66mm 9436 CT300LSS 4
70-238 60mm 71mm 9440 CT300LSS 4
70-250 63mm 73mm 9444 CT300LSS 4
70-275 70mm 80mm 9448 CT350LSS 4
70-287 73mm 84mm 9448 CT350LSS 4
70-312 80mm 89mm 9452 CT350LSS 4
70-300 76mm 87mm 9452 CT350LSS 4
70-350 89mm 100mm 9456 CT400LSS 4
70-375 95mm 105mm 9464 CT450LSS 4
70-400 102mm 110mm 9464 CT450LSS 4
70-450 114mm 123mm 9472 CT500LSS 4
70-500 127mm 135mm 9488 CT550LSS 4
70-550 140mm 152mm 9488 CT600LSS 4
Recommended Clamp
Part No. ID Length Plys Breeze# C.Torque#
77-150-200-4 38 / 51mm 102mm 4 9428 / 9436 CT200LSS / CT250LSS
77-175-200-4 44 / 51mm 102mm 4 9432 / 9436 CT250LSS / CT300LSS
77-200-225-4 51 / 57mm 102mm 4 9436 / 9440 CT250LSS / CT300LSS
77-200-250-4 51 / 63mm 102mm 4 9436 / 9444 CT250LSS / CT300LSS
77-200-300-4 51 / 76mm 102mm 4 9436 / 9452 CT250LSS / CT350LSS
77-225-250-6 57 / 63mm 152mm 4 9440 / 9444 CT250LSS / CT300LSS
77-225-300-4 57 / 76mm 102mm 4 9440 / 9452 CT250LSS / CT350LSS
77-250-300-4 63 / 76mm 102mm 4 9444 / 9452 CT300LSS / CT350LSS
77-275-300-3 70 / 76mm 76mm 4 9448 / 9452 CT350LSS / CT350LSS
77-300-350-4 76 / 89mm 102mm 4 9452 / 9464 CT350LSS / CT400LSS
77-300-400-6 76 / 102mm 152mm 4 9452 / 9472 CT350LSS / CT450LSS
NOTE: Sold as 1m lengths
PAGE 52
SILICONE COOLANT HOSE (180°C)
SILICONE VACUUM HOSE (180°C)
Purosil Silicone 90° Elbow
Purosil Silicone Vacuum Hose
Purosil Silicone 45° Elbow
Recommended Clamp
Part No. ID OD Leg Length Plys Breeze# C.Torque#90-050 13mm 22mm 150mm 4 9408 CT9412LSS
90-062 16mm 27mm 150mm 4 9410 CT9416SS
90-075 19mm 30mm 150mm 4 9412 CT9420LSS
90-100 25mm 36mm 150mm 4 9416 CT9420LSS
90-125 32mm 42mm 150mm 4 9420 CT9420LSS
90-150 38mm 47mm 150mm 4 9424 CT200LSS
90-175 44mm 54mm 150mm 4 9428 CT250LSS
90-175-53 44mm 54mm 178 - 229mm 4 9412 CT9420LSS
90-200 51mm 62mm 150mm 4 9432 CT250LSS
90-200-120 51mm 62mm 254 - 254mm 4 9432 CT250LSS
90-225 57mm 68mm 150mm 4 9436 CT300LSS
90-225-70 57mm 68mm 305 - 305mm 4 9436 CT300LSS
90-250 63mm 74mm 150mm 4 9444 CT300LSS
90-250-68 63mm 74mm 152 - 254mm 4 9444 CT300LSS
90-275 70mm 80mm 150mm 4 9448 CT350LSS
90-300 76mm 86mm 150mm 4 9452 CT350LSS
90-300-21 76mm 86mm 178 - 254mm 4 9452 CT350LSS
90-350 89mm 100mm 150mm 4 9456 CT400LSS
90-400 102mm 110mm 150mm 4 9464 CT450LSS
Recommended Clamp
Part No. ID OD Leg Length Plys Breeze# C.Torque#9046-100 25mm 36mm 150mm 4 9416 CT9420LSS
9046-125 32mm 42mm 150mm 4 9420 CT9420LSS
9046-150 38mm 47mm 150mm 4 9424 CT200LSS
9046-175 44mm 54mm 150mm 4 9428 CT250LSS
9046-200 51mm 62mm 150mm 4 9432 CT250LSS
9046-225 57mm 68mm 150mm 4 9436 CT300LSS
9046-250 63mm 74mm 150mm 4 9444 CT300LSS
9046-275 70mm 80mm 150mm 4 9448 CT350LSS
9046-300 76mm 86mm 150mm 4 9452 CT350LSS
9046-350 89mm 100mm 150mm 4 9456 CT400LSS
9046-400 102mm 110mm 150mm 4 9464 CT450LSS
Recommended Clamp
Part No. ID OD Length Breeze Worm Drive #
50-012 3mm 6mm 15m 3704
50-018 5mm 8mm 15m 3704
50-031 8mm 14mm 15m 3706
50-038 10mm 16mm 15m 3706
PAGE 53
SILICONE COOLANT HOSE (180°C)
SILICONE TURBO HOSE (260°C)
Purosil Silicone Hump Hose
Purosil Silicone Turbo Lube Return
Purosil Silicone Heater Hose
Recommended Clamp
Part No. ID OD Length Breeze# C.Torque#
80-025 6mm 12mm 5m OR 15m 3704
80-031 8mm 14mm 5m OR 15m 3704
80-038 10mm 17mm 5m OR 15m 3706
80-050 13mm 20mm 5m OR 15m 9410 CT9412LSS
80-062 16mm 24mm 5m OR 15m 9410 CT9420LSS
80-075 19mm 27mm 5m OR 15m 9416 CT9420LSS
80-087 22mm 30mm 5m OR 15m 9416 CT9420LSS
80-100 25mm 33mm 5m OR 15m 9420 CT9420LSS
Recommended Clamp
Part No. ID OD Length Breeze# C.Torque#
76-150-600 38mm 47mm 152mm 9424 CT200LSS
76-175-600 45mm 54mm 152mm 9428 CT250LSS
76-200-600 51mm 62mm 152mm 9432 CT250LSS
76-225-600 57mm 68mm 152mm 9440 CT300LSS
76-250-600 63mm 74mm 152mm 9444 CT300LSS
76-275-600 70mm 80mm 152mm 9448 CT350LSS
76-300-600 76mm 86mm 152mm 9452 CT350LSS
76-350-600 89mm 100mm 152mm 9456 CT400LSS
76-400-600 102mm 110mm 152mm 9464 CT450LSS
76-450-600 114mm 127mm 152mm 9472 CT500LSS
76-500-600 127mm 140mm 152mm 9488 CT550LSS
76-550-600 127mm 152mm 152mm 9496 CT600LSS
76-600-600 152mm 165mm 152mm 94104 CT650LSS
Recommended Clamp
Part No. ID OD Length Breeze# C.Torque#
364FC-075 19mm 30mm 1m* 9412 CT9420SS
364FC-087 22mm 32mm 1m* 9416 CT9420SS
364FC-100 25mm 37mm 1m* 9416 CT9420SS
* 0.5m lengths available, add “-500” to end of part number
PAGE 54
SILICONE TURBO HOSE (260°C)Silicone Charge Air Connectors
Silicone Turbo Charger Hose
Silicone Turbo 90° Elbow
Recommended Clamp
Part No. ID OD Length Plys Breeze # C.Torque#
367-250-060 63mm 68mm 152mm 4 9440 CT300LSS
367-300-060 76mm 83mm 152mm 4 9448 CT350LSS
367-300350-060 76-89mm 83-95mm 152mm 4 9448/9456 CT350/CT400
367-350-060 89mm 95mm 152mm 4 9456 CT400LSS
367-350400-060 89-102mm 95-108mm 152mm 4 9456/9464 CT400/CT450
367-400-060 102mm 108mm 152mm 4 9464 CT450LSS
367-400-070 102mm 108mm 178mm 4 9464 CT450LSS
367-400-080 102mm 108mm 203mm 4 9464 CT450LSS
367-450-060 114mm 120mm 152mm 4 9472 CT500LSS
267-400450-060 102-114mm 108-120mm 152mm 4 9464/9472 CT450/CT500
367-450-080 114mm 120mm 203mm 4 9472 CT500LSS
367-500-080 127mm 133mm 203mm 4 9488 CT550LSS
Recommended Clamp
Part No. ID OD Length Plys Breeze # C.Torque#
364-175 44mm 52mm 1metre 4 9428 CT250LSS
364-200 51mm 60mm 1metre 4 9432 CT250LSS
364-225 57mm 65mm 1metre 4 9436 CT300LSS
364-250 63mm 71mm 1metre 4 9440 CT300LSS
364-275 70mm 78mm 1metre 4 9448 CT350LSS
364-300 76mm 85mm 1metre 4 9452 CT350LSS
364-338 86mm 91mm 1metre 4 9456 CT400LSS
364-350 89mm 98mm 1metre 4 9456 CT400LSS
364-375 95mm 101mm 1metre 4 9464 CT450LSS
364-400 102mm 111mm 1metre 4 9464 CT450LSS
364-450 114mm 123mm 1metre 4 9472 CT500LSS
Recommended Clamp
Part No. ID OD Leg Length Plys Breeze # C.Torque#
3648-100-MK 25mm 36mm 150mm 4 9416 CT9420LSS
3648-125-MK 32mm 42mm 150mm 4 9420 CT9420LSS
3648-150-MK 38mm 47mm 150mm 4 9424 CT200LSS
3648-175-MK 44mm 54mm 150mm 4 9428 CT250LSS
3648-200-MK 51mm 62mm 150mm 4 9432 CT250LSS
3648-225-MK 57mm 68mm 150mm 4 9436 CT300LSS
3648-250-MK 63mm 74mm 150mm 4 9444 CT300LSS
3648-275-MK 70mm 80mm 150mm 4 9448 CT350LSS
3648-300-MK 76mm 86mm 150mm 4 9452 CT350LSS
3648-350-MK 89mm 100mm 150mm 4 9456 CT400LSS
3648-400-MK 102mm 110mm 150mm 4 9464 CT450LSS
PAGE 55
AIR INTAKE HOSES
90 ° Bends 45° Bends
90 ° Cobra Bends Reducing 45° Bends
Reducing 90° Bends
Specifically formulated EPDM Compound
Vacuum collapse rating exceeds 4” Hg. Mercury
Recommended for temperatures: - 50°C to +150°C Duty
Part No. ID T-Bolt Clamp
CRL05190 51mm 94106-0238
CRL05790 57mm 94106-0250
CRL06390 63mm 94106-0300
CRL07690 76mm 94106-0350
CRL08990 89mm 94106-0400
CRL10290 102mm 94106-0450
CRL10290SR 102mm 94106-0450
CRL11490 114mm 94106-0500
CRL12790 127mm 94106-0550
CRL14090 140mm 94106-0600
CRL15290 152mm 94106-0650
CRL15290SR 152mm 94106-0650
CRL17890 178mm 94106-0766
CRL20390 203mm 94106-0900
CRL25490 254mm 94106-1075
Part No. ID T-Bolt Clamp
DRL05145 51mm 94106-0238
DRL05745 57mm 94106-0250
DRL06345 63mm 94106-0300
DRL07645 76mm 94106-0350
DRL08945 89mm 94106-0400
DRL10245 102mm 94106-0450
DRL11445 114mm 94106-0500
DRL12745 127mm 94106-0550
DRL14045 140mm 94106-0600
DRL15245 152mm 94106-0650
DRL17845 178mm 94106-0766
DRL20345 203mm 94106-0900
DRL25445 254mm 94106-1075
Part No. ID - ID T-Bolt ClampERL07606390 76mm 63mm 94106-0350 / 94106-0300
ERL08907690 89mm 76mm 94106-0350 / 94106-0400
ERL10207090 102mm 70mm 94106-0450 / 94106-0325
ERL10207690 102mm 76mm 94106-0450 / 94106-0350
ERL10208990 102mm 89mm 94106-0450 / 94106-0400
ERL12710290 127mm 102mm 94106-0550 / 94106-0450
ERL14010290 140mm 102mm 94106-0600 / 94106-0450
ERL14012790 140mm 127mm 94106-0600 / 94106-0550
ERL15212790 152mm 127mm 94106-0650 / 94106-0550
ERL15214090 152mm 140mm 94106-0650 / 94106-0600
ERL17812790 178mm 127mm 94106-0766 / 94106-0550
ERL17814090 178mm 140mm 94106-0766 / 94106-0600
ERL17815290 178mm 152mm 94106-0766 / 94106-0650
ERL20317890 203mm 178mm Please Check
Part No. ID T-Bolt Clamp
FRL90CB076 76 94106-0350
FRL90CB102 102 94106-0450
Part No. ID-ID T-Bolt ClampGRL15210245 152mm 102mm 94106-0650 / 94106-0450
GRL15212745 152mm 127mm 94106-0650 / 94106-0550
GRL15214045 152mm 140mm 94106-0650 / 94106-0600
GRL17815245 178mm 152mm 94106-0766 / 94106-0650
PAGE 56
AIR INTAKE HOSESSpecifically formulated EPDM Compound
Vacuum collapse rating exceeds 4” Hg. Mercury
Recommended for temperatures: - 50°C to + 150°C Duty
Reducing Inserts Reducing Hump Hoses
Air Intake Ducting Hump Hoses
Part No. ID Bend Radius
Coil Length*
Max Temp
TPR-038 38mm 30mm 10/20 mtr 125°C
TPR-045 45mm 36mm 10/20 mtr 125°C
TPR-050 51mm 40mm 10/20 mtr 125°C
TPR-063 63mm 55mm 10/20 mtr 125°C
TPR-070 70mm 60mm 10/20 mtr 125°C
TPR-076 76mm 65mm 10/20 mtr 125°C
TPR-080 80mm 65mm 10/20 mtr 125°C
TPR-090 90mm 75mm 10/20 mtr 125°C
TPR-100 102mm 85mm 10/15 mtr 125°C
TPR-125 127mm 105mm 10/15 mtr 125°C
TPR-150 152mm 125mm 10/15 mtr 125°C
TPR-200 203mm 165mm 10/15 mtr 125°C
Part No. ID T-Bolt Clamp
AHH063 63mm 94106-0300
AHH076 76mm 94106-0350
AHH089 89mm 94106-0400
AHH102 102mm 94106-0450
AHH114 114mm 94106-0500
AHH127 127mm 94106-0550
AHH140 140mm 94106-0600
AHH152 152mm 94106-0650
AHH178 178mm 94106-0766
AHH203 203mm 94106-0870
AHH254 254mm 94106-1075
Note: Thermoplastic rubber hose reinforced with steel spiral
Sold in 1m increments
Part No. ID ODRI051038 38mm 51mmRI051044 44mm 51mmRI063051 51mm 63mmRI063057 57mm 63mmRI076051 51mm 76mmRI076057 57mm 76mmRI076063 63mm 76mmRI076070 70mm 76mmRI089076 76mm 89mmRI102076 76mm 102mmRI102080 80mm 102mmRI102089 89mm 102mmRI114102 102mm 114mmRI127102 102mm 127mmRI127114 114mm 127mmRI140127 127mm 140mmRI152127 127mm 152mmRI152140 140mm 152mmRI178152 152mm 178mmRI203178 178mm 203mm
Part No. ID-ID T-Bolt ClampBHHR076063 76mm 63mm 94106-0350 / 94106-0300
BHHR076070 76mm 70mm 94106-0350 / 94106-0325
BHHR089063 89mm 63mm 94106-0400 / 94106-0300
BHHR089076 89mm 76mm 94106-0400 / 94106-0350
BHHR102076 102mm 76mm 94106-0450 / 94106-0350
BHHR102089 102mm 89mm 94106-0450 / 94106-0400
BHHR114102 114mm 102mm 94106-0500 / 94106-450
BHHR127102 127mm 102mm 94106-0500 / 94106-0450
BHHR140102 140mm 102mm 94106-0600 / 94106-0450
BHHR140127 140mm 127mm 94106-0600 / 94106-0550
BHHR152127 152mm 127mm 94106-0650 / 94106-0550
BHHR152140 152mm 140mm 94106-0650 / 94106-0600
BHHR178127 178mm 127mm 94106-0766 / 94106-0550
BHHR178140 178mm 140mm 94106-0766 / 94106-0600
BHHR178152 178mm 152mm 94106-0766 / 94106-0650
BHHR203152 203mm 152mm 94106-0870 / 94106-0650
BHHR203178 203mm 178mm 94106-0870 / 94106-0766
BHHR254203 254mm 203mm 94106-1075 / 94106-0870
PAGE 57
GATES RUBBER FUEL/RADIATOR HOSESFuel Filler Flex Hose Green Stripe Vulcoflex Coolant Hose
Premoflex Oil Resistant Hose Diesel/ Petrol Fuel Hose
45° Fuel Filler Hose Bends
90° Fuel Filler Hose Bends
Part No. ID Length Max Temp
32050015 6mm 12.7mm 100°C
32050020 8mm 14.2mm 100°C
32050025 10mm 16.8mm 100°C
32050030 13mm 21.6mm 100°C
32050036 16mm 24.9mm 100°C
32050040 19mm 29.2mm 100°C
32050046 25mm 37.3mm 100°C
32050049 32mm 44.5mm 100°C
32050055 38mm 50.8mm 100°C
Part No. I/D Roll Length PSI
27002 6mm 7.62m 50
27003 8mm 7.62m 50
27004 10mm 7.62m 50
27005 11mm 7.62m 35
27006 13mm 7.62m 35
Note: Suitable for petroleum oils
Note: Performs to SAE 30R6 and 30R7.
Part No. I.D Length Max Temp
25477 38mm 394mm 125°C
25480 38mm 508mm 125°C
25530 38-44mm 508mm 125°C
26431 44mm 483mm 125°C
26434 44-51mm 419mm 125°C
26439 51mm 432mm 125°C
26502 44mm 419mm 125°C
26505 44-51mm 483mm 125°C
26506 44-51mm 597mm 125°C
26510 51mm 432mm 125°C
26511 51mm 508mm 125°C
26512 51mm 605mm 125°C
26513 51mm 838mm 125°C
26516 51-57mm 445mm 125°C
26517 51-57mm 635mm 125°C
26518 51-64mm 508mm 125°C
26523 57mm 483mm 125°C
26525 57mm 686mm 125°C
26526 57-64mm 457mm 125°C
26528 57-64mm 635mm 125°C
26531 64mm 406mm 125°C
26532 64mm 610mm 125°C
26536 70mm 457mm 125°C
26537 70mm 813mm 125°C
26538 76mm 940mm 125°C
Part No. Dia Max Press. Length
23924 38mm 20 PSI 914mm
23930 48mm 20 PSI 914mm
23932 51mm 20 PSI 914mm
23936 57mm 20 PSI 914mm
23980 63mm 20 PSI 914mm
Part No. I.D Length Max Press.
24710 38mm 404mm 20 PSI
24711 44mm 404mm 20 PSI
24712 51mm 404mm 20 PSI
24713 57mm 404mm 20 PSI
24714 63mm 401mm 20 PSI
Part No. I.D Length Max Press.
24715 38mm 383mm 20 PSI
24716 44mm 381mm 20 PSI
24717 51mm 378mm 20 PSI
24718 57mm 373mm 20 PSI
24719 63mm 371mm 20 PSI
Note: Suitable for petrol & diesel
Note: Suitable for petrol & diesel
PAGE 58
T-BOLT CLAMPS
Full Stainless T-Bolt Clamps Norma GBS H/D Clamps
Springloaded T-Bolt Clamps
Part No. Range Band Width
94143-0275 65-72mm 19mm
94143-0300 70-78mm 19mm
94143-0325 76-84mm 19mm
94143-0350 83-90mm 19mm
94143-0375 89-97mm 19mm
94143-0425 102-109mm 19mm
94143-0450 108-116mm 19mm
94143-0475 115-122mm 19mm
94143-0525 127-135mm 19mm
94143-0550 134-141mm 19mm
94143-0660 162-169mm 19mm
94143-0766 188-196mm 19mm
94143-0872 215-223mm 19mm
Part No. Part No.
Zinc Plated Stainless Steel Range Band Width
W1GBS018/18 W4GBS018/18 17-19mm 18mm
W1GBS022/18 W4GBS022/18 21-23mm 18mm
W1GBS028/18 W4GBS028/18 27-29mm 18mm
W1GBS030/18 W4GBS030/18 29-31mm 18mm
W1GBS033/18 W4GBS033/18 31-34mm 18mm
W1GBS036/18 W4GBS036/18 34-37mm 18mm
W1GBS039/18 W4GBS039/18 37-40mm 18mm
W1GBS042/18 W4GBS042/18 40-43mm 20mm
W1GBS045/20 W4GBS045/20 43-47mm 20mm
W1GBS049/20 W4GBS049/20 47-51mm 20mm
W1GBS053/20 W4GBS053/20 51-55mm 20mm
W1GBS057/20 W4GBS057/20 55-59mm 20mm
W1GBS061/20 W4GBS061/20 59-63mm 20mm
W1GBS066/20 W4GBS066/20 63-68mm 25mm
W1GBS071/25 W4GBS071/25 68-73mm 25mm
W1GBS076/25 W4GBS076/25 73-79mm 25mm
W1GBS082/25 W4GBS082/25 79-85mm 25mm
W1GBS088/25 W4GBS088/25 85-91mm 25mm
W1GBS094/25 W4GBS094/25 91-97mm 25mm
W1GBS101/25 W4GBS101/25 97-104mm 25mm
W1GBS108/25 W4GBS108/25 104-112mm 25mm
W1GBS117/25 W4GBS117/25 112-121mm 25mm
W1GBS126/25 W4GBS126/25 121-130mm 30mm
W1GBS135/30 W4GBS135/30 130-140mm 30mm
W1GBS145/30 W4GBS145/30 140-150mm 30mm
W1GBS156/30 W4GBS156/30 150-162mm 30mm
W1GBS168/30 W4GBS168/30 162-174mm 30mm
W1GBS181/30 W4GBS181/30 174-187mm 30mm
W1GBS194/30 W4GBS194/30 187-200mm 30mm
W1GBS207/30 W4GBS207/30 200-213mm 30mm
W1GBS220/30 W4GBS220/30 213-226mm 30mm
W1GBS233/30 W4GBS233/30 226-239mm 30mm
W1GBS246/30 W4GBS246/30 239-252mm 30mm
Part No. Range Band Width
94106-0188 41-52mm 19mm
94106-0212 45-55mm 19mm
94106-0238 51-60mm 19mm
94106-0250 55-66mm 19mm
94106-0300 67-78mm 19mm
94106-0325 72-85mm 19mm
94106-0350 80-92mm 19mm
94106-0400 93-106mm 19mm
94106-0450 105-118mm 19mm
94106-0500 120-135mm 19mm
94106-0550 130-144mm 19mm
94106-0600 145-160mm 19mm
94106-0650 156-174mm 19mm
94106-0766 186-200mm 19mm
94106-0850 202-227mm 19mm
94106-0870 210-235mm 19mm
94106-1050 261-269mm 19mm
94106-1075 265-280mm 19mm
94106-1250 305-325mm 19mm
PAGE 59
CLAMPS AND HOSE JOINERS
Constant Torque Clamps Liner Worm Drive Clamps
P-Clips Aluminium Hose Joiners
Part No. Range Torque Setting
CT9420SS 21-44mm 50 inch lbs
CT200LSS 32-54mm 90 inch lbs
CT250LSS 45-67mm 90 inch lbs
CT300LSS 57-79mm 90 inch lbs
CT350LSS 70-92mm 90 inch lbs
CT400LSS 83-105mm 90 inch lbs
CT450LSS 95-118mm 90 inch lbs
CT500LSS 108-130mm 90 inch lbs
CT550LSS 121-143mm 90 inch lbs
CT600LSS 133-156mm 90 inch lbs
CT650LSS 146-168mm 90 inch lbs
CT700LSS 159-181mm 90 inch lbs
CT750LSS 172-194mm 90 inch lbs
CT800LSS 184-206mm 90 inch lbs
CT850LSS 197-219mm 90 inch lbs
CT900LSS 210-232mm 90 inch lbs
Part No. Range Band Width3704 6 - 16mm 12.7mm
9408 13-23mm 12.7mm
9410 14-27mm 12.7mm
9412 17-32mm 12.7mm
9416 21-38mm 12.7mm
9420 21-44mm 12.7mm
9424 27-51mm 12.7mm
9428 33-57mm 12.7mm
9432 40-64mm 12.7mm
9436 46-70mm 12.7mm
9440 52-76mm 12.7mm
9444 59-83mm 12.7mm
9448 65-89mm 12.7mm
9452 71-95mm 12.7mm
9456 78-102mm 12.7mm
9464 91-114mm 12.7mm
9472 105-127mm 12.7mm
9480 117-140mm 12.7mm
9488 130-152mm 12.7mm
9496 143-165mm 12.7mm
94104 156-170mm 12.7mm
Part No. RangeRSGUI-10/15-1 10mm
RSGUI-13/15-1 13mm
RSGUI-16/15-1 16mm
RSGUI-20/15-1 20mm
RSGUI-25/15-1 25mm
RSGUI-29/15-1 29mm
RSGUI-35/15-1 35mm
RSGUI-40/15-1 40mm
RSGUI-45/15-1 45mm
RSGUI-50/15-1 50mm
RSGUI-60/20-1 60mm
Part No. Size LengthHJ019 19mm 76mm
HJ025 25mm 76mm
HJ032 32mm 76mm
HJ038 38mm 76mm
HJ051 51mm 76mm
HJ057 57mm 76mm
HJ063 63mm 76mm
HJ070 70mm 76mm
HJ076 76mm 76mm
HJ089 89mm 76mm
HJ102 102mm 76mm
PAGE 60
CRANK CASE FILTER ASSEMBLIES
Racor Closed Circuit CCV
Mann+Humel Open/Closed Circuit Provent
FEATURES• Pop-Up Filter Change Indicator
• High efficiency to 0.3 micron
• Aluminium/Steel housing
FEATURES• Easy screw on/off service lid
• 360° adjustable securing bracket
Models CCV4500 CCV6000 CCV8000 CCV12000
Engine Rating 400HP 800HP 1600HP 2000HP
Height 235mm 305mm 352mm 457mm
Depth 142mm 185mm 236mm 269mm
Replacement Element CCV55248 CCV55274 CCV55222 CCV55222-12
Inlet & Outlet Thread 1 3/16"-12 STOR 1 5/8"-12 STOR 1 7/8"-12 STOR 1 7/8”-12 STOR
Max Flow 10 CFM 20 CFM 40 CFM 50 CFM
Engine Return Fitting 1/4" NPT 1/4" NPT 3/8" NPT 3/8"NPT
Models PROVENT100 PROVENT150 PROVENT200 PROVENT400 PROVENT800
Height 146mm 196mm 221mm 301mm 350mm
Depth 137mm 107mm 137mm 162mm 229mm
Width 116mm 132mm 149mm 209mm 240mm
Inlet / Outlet 19mm 19mm 25mm 38mm 51mm
Drain 12mm 12mm 12mm 15mm 15mm
Element P/N LC7001 LC7201X LC5001X LC10001X LC16001X
Max Flow 100 LPM 150 LPM 200 LPM 400 LPM 800 LPMCheck Valve
(Optional)2400843621 2400843621 2400843621 2401343992 2401343992
Crankcase blow-by is produced when combustion gases are blown passed the piston rings into the
crankcase. As these blow-by gases pass though the crankcase, they become contaminated.
Crankcase Ventilation Filters remove these contaminants so the exhaust can then be allowed to vent to:
CLOSED CIRCUIT - The exhaust from the outlet is routed to the inlet side of the turbo
OPEN CIRCUIT - The exhaust from the outlet is vented to atmosphere
PAGE 62
RACOR MARINE AIR FILTER/SILENCERS
RACOR HIGH EFF. AIR CLEANERS
ECOLITE
ECO II
ECO-SE
Note: Sold with Cleanable Element
Part No. AF M408512 AF M501012 AF M601212 AF M701212
Max. Air Flow 800 CFM 1200 CFM 1600 CFM 2000 CFM
Outlet Dia. 102mm 127mm 152mm 178mm
Filter AF M8040 AF M8050 AF M8060 AF M8070
Length 318mm 318mm 318mm 318mm
Depth 244mm 292mm 343mm 343mm
Hose Barb 25mm 32mm 32mm 25mm
Part No. Air Flow (8"H2O) In/Out Dia. Body Dia Length
62891001 1200CFM 152mm 249mm 610mm
62891002 1650CFM 178mm 279mm 610mm
62891003 1900CFM 178mm 343mm 610mm
62891004 1590CFM 178mm 343mm 457mm
Part No. Air Flow (8"H2O) Outlet Dia Body Dia Length
71338001 1100CFM 152mm 249mm 610mm
71338002 1380CFM 178mm 279mm 610mm
71338003 1600CFM 178mm 343mm 610mm
71338004 1600CFM 178mm 343mm 457mm
71338009 1910CFM 178mm 343mm 610mm
Part No. Air Flow (8"H2O) Outlet Dia Body Dia. Length
114500001 340 76mm 171mm 361mm
114500002 510 102mm 197mm 437mm
114500003 890 127mm 246mm 513mm
• Reversible Inlet/Outlet• Air can flow both ways through the air cleaner
• Inlet on side and out the opposite end• Water resistant media
• In one end, out the otther• Water drain holes at top and bottom• Water Resistant media
PAGE 63
ENGINE AIR PRECLEANERS
Centri S/S Spinners
Donaldson Full View Pre-Cleaner
THE RESULTS: • Up to 12 times longer air filter life
• Particulate separation up to 90% +
• Maintenance free.
** LIFETIME WARRANTY **
Recommended
Part No. A B C CFM Range
EX-20 133mm 86mm 51mm 50-100
EX-25 165mm 108mm 64mm 100-200
EX-30 165mm 127mm 76mm 150-275
EX-40 225mm 149mm 102mm 200-400
EX-50 286mm 190mm 127mm 350-700
EX-60 324mm 197mm 152mm 500-950
EX-70 375mm 216mm 178mm 750-1350
EX-80 375mm 216mm 203mm 950-1600
Part No.To Fit Max Air Flow Cover Bowl
Tube Size CFM Assembly AssemblyH002042 44mm 80
P020116 P020115H002040 51mm 90
H001823 51mm 110
P020648 P020227H001250 57mm 130
H001251 64mm 150
H001249 76mm 170
H000820 76mm 320
P016548 P016330H000821 95mm 330
H000858 102mm 340
H000823 102mm 340
H002045 114mm 660
P020345 P020344H002044 114mm 700
H002043 127mm 740
H002223 152mm 1300P104691 P158324
H002224 178mm 1500
PAGE 64
DONALDSON AIR FILTER ACCESSORIESIndicator - Informer Air Inlet Hoods
Vacuator Valves Metal Mounting Bands
Indicator-ServiSignal
Standard Air Rams
Polymer Mounting Bands
Part No. Restriction LimitX002103 20"H2O
X002102 25" H2O
X002101 30" H2O
Part No. SizeP900767 102mm
P004055 111mm
P002348 133mm
P002351 152mm
P007191 165mm
P900345 178mm
P004307 203mm
P004073 229mm
P004076 259mm
P004079 279mm
H000349 300mm
P013722 330mm
H000350 356mm
P016845 381mm
H000351 406mm
H770037 457mm
STYLE A
Part No. SizeX002017 44mm
X002018 51mm
X001966 63mm
X002014 76mm
X002015 102mm
STYLE B
Part No. SizeH002068 44mm
H001377 51mm
H008208 64mm
H008209 76mm
H008210 102mm
STYLE C
Part No. SizeH000473 95mm
H000471 114mm
H000469 127mm
H000604 140mm
H000606 152mm
H000607 178mm
H001053 203mm
Part No. Restriction LimitX002250 15"H2O
X002251 20" H2O
X002252 25" H2O
X002254 30" H2O
Part No. SizeH008149 76mm
H008154 102mm
H008150 127mm
H001733 152mm
H001725 178mm
X004995* 152-178mm
H001661 203mm
Part No. SizeP777151 122mm
P777730 146mm
P778810 173mm
P777731 182mm
P777732 212mm
P780532 241mm
P780594 268mm
Part No. Size DuroP149099 25mm 60
P525956 25mm 60
P617632 40mm 50
P158914 51mm 50
P522958 51mm 60
P776008 51mm 60
P103198 76mm 40
P112803 76mm 40
P105220 76mm 60
Shows a graduated reading and shows
red when limit reached
For mounting metallic air cleaners
Mounts on stack or directly to air cleaner
Shows red in view window when restriction limit reached
Improves intake system air flow for on road applications
Designed for use with FPG series of air cleaners
One way rubber valve that expels dirt
*Low Profile
PAGE 65
POWERCORE AIR CLEANERS
PSD Powercore - Medium Dust Conditions
• Primary/Safety Element Included
• Inbuilt Precleaner
• Horizontal (Flat) or Vertical (Tall) Mounting
• Integrated Mounting Brackets
CFM @"H2O
6"H2O 8"H2O 10"H2O Mounting Outlet Dia. Length Height Width
Part No. MODELS WITH SERVICE ACCESS ON END
D080020 176 206 232 Horiz. 89mm 380mm 256mm 154mm
D080026 176 206 232 Vert. 89mm 380mm 256mm 154mm
Part No. MODELS WITH SERVICE ACCESS ON SIDE
D080056 180 216 245 Vert. 89mm 370mm 247mm 180mm
D090073 293 345 391 Vert. 102mm 433mm 362mm 180mm
D090101 284 329 370 Vert. 102mm 533mm 363mm 180mm
D090120 293 345 391 Horiz. 102mm 433mm 180mm 360mm
D090121 284 326 370 Horiz. 102mm 533mm 180mm 363mm
D090055 267 315 357 Horiz. 102mm 432mm 180mm 363mm
D100029 500 580 652 Vert. 127mm 429mm 374mm 254mm
D100030 500 580 652 Horiz. 127mm 429mm 254mm 374mm
D100031 532 622 700 Vert. 152mm 529mm 384mm 254mm
D100032 532 622 700 Horiz. 152mm 529mm 254mm 384mm
D100068 532 622 700 Horiz. 152mm 529mm 254mm 384mm
D100072 500 580 652 Horiz. 127mm 429mm 254mm 374mm
D120035 700 810 915 Vert. 152mm 496mm 430mm 306mm
D120036 700 810 915 Horiz. 152mm 496mm 306mm 430mm
D120037 700 810 915 Vert. 152mm 596mm 441mm 306mm
D120038 700 810 915 Horiz. 152mm 596mm 306mm 441mm
D140078 1133 1323 1490 Vert. 178mm 670mm 501mm 318mm
D140079 1133 1323 1490 Horiz. 178mm 670mm 318mm 501mm
D140088 1133 1323 1490 Horiz. 178mm 670mm 318mm 501mm
VERTICAL HORIZONTAL
PAGE 66
POWERCORE AIR CLEANERS
DURALITE DISPOSABLE ASSEMBLIES
PCD Powercore - Light to Medium Dust Condtions
ECB Duralite - Light Dust ECC Duralite - Light Dust
CFM @"H2O
Part No.In/Outlet
Offset6"H2O 8"H2O 10"H2O Inlet/Outlet Dia. Length Height Width
D090114 Yes 422 493 555 102mm 453mm 360mm 180mm
D090115 No 422 493 555 102mm 453mm 360mm 180mm
D100145 Yes 746 867 974 127mm 436mm 375mm 254mm
D100146 No 746 867 974 127mm 436mm 375mm 254mm
• Primary/Safety Element Included
• Choice of Inline or Offset Inlet/Outlet
• Integrated Mounting Brackets
• Designed for On-Hwy Applications
Part No.Airflow CFM @ Outlet Dia Body Dia Length
6" H20 8" H20
B085001 335 390 76mm 216mm 279mm
B085009 - - 76mm - 76mm
B085011 400 470 102mm 216mm 279mm
B085046 400 470 102mm 216mm 279mm
B105006 590 680 102mm 267mm 267mm
B105020 440 480 102mm 267mm 267mm
B105036 1024 1306 128mm - 381mm
B120376 1836 2189 203mm 318mm 400mm
B120439 1305 1500 198mm - 400mm
B125003 1110 1295 152mm 318mm 381mm
B125011 882 1024 127mm 318mm 228mm
Part No.Airflow CFM @ Outlet Dia Body Dia Length6" H20 8" H20
C045001 55 64 38mm 114mm 114mm
C065001 11 140 51mm 165mm 102mm
C065002 137 162 51mm 165mm 191mm
C065003 150 175 57mm 165mm 127mm
C065015 147 190 61mm 165mm 229mm
C085001 145 170 64mm 216mm 102mm
C085002 165 188 64mm 216mm 165mm
C085003 180 215 76mm 216mm 127mm
C085004 205 245 76mm 216mm 241mm
C105003 400 480 102mm 267mm 152mm
C125004 500 620 102mm 267mm 267mm
PAGE 67
DONALDSON AIR CLEANER ASSEMBLIES
FPG Series - Twin Element - Medium Dust
FRG Series - Twin Element - Medium Dust
FWG Series - Single Element - Light Dust
Part No.Airflow CFM @ Inlet Dia Outlet Dia Body Dia Length
6" H20 8" H20
G042544 55 65 44mm 44mm 122mm 189mm
G057511 65 80 51mm 51mm 146mm 276mm
G057512* 65 80 51mm 51mm 146mm 278mm
G065411* 110 125 63mm 63mm 171mm 320mm
G065424 110 125 64mm 64mm 171mm 320mm
G070017 125 145 76mm 76mm 183mm 332mm
G070018* 125 145 76mm 76mm 183mm 330mm
G082525 165 190 95mm 89mm 212mm 361mm
G082526* 165 190 95mm 89mm 212mm 361mm
G090219* 256 317 114mm 89mm 242mm 400mm
G090225 265 300 114mm 102mm 242mm 400mm
G100317* 247 282 114mm 102mm 268mm 428mm
G100319 259 297 114mm 102mm 268mm 428mm
Part No.Airflow CFM @ Inlet Dia Outlet Dia Body Dia Length
6" H20 8" H20
G052685 82 95 64mm 64mm - 375mm
G065541 152 195 76mm 76mm 166mm 392mm
G080582 198 228 95mm 89mm 203mm 402mm
G090245 268 315 114mm 102mm 229mm 429mm
G100395 283 332 114mm 127mm 259mm 534mm
G110206* 370 430 127mm 114mm 279mm 490mm
G120415 315 350 127mm 127mm 305mm 484mm
G140523 486 570 152mm 152mm 560mm 356mm
G150092* 715 805 178mm 152mm 381mm 530mm
G160679 590 700 178mm 178mm 406mm 611mm
G180031* 1040 1230 203mm 203mm 457mm 650mm
Part No.Airflow CFM @ Inlet Dia Outlet Dia Body Dia Length
6" H20 8" H20
G042503 58 67 44mm 44mm - 246mm
G052528 77 90 50mm 50mm 133mm 312mm
G065180 112 130 64mm 57mm 165mm 348mm
G080061 205 238 76mm 76mm 203mm 378mm
G108027 296 343 101mm 101mm 259mm 411mm
G120059 369 433 114mm 101mm 300mm 429mm
G140077 541 635 127mm 140mm 356mm 488mm
* Models with 90° outlet
* Air cleaner has an easy to service plastic end cap with clips
PAGE 68
DONALDSON AIR CLEANER ASSEMBLIES FVG Series - Twin Element - Heavy Dust
SSG Series - Twin Element - Heavy Dust
STG Series - Twin Element - Heavy Dust
SRG Series - Twin Element - Heavy Dust
Part No. Airflow CFM @ Inlet Dia Outlet Dia Body Dia Length
6" H20 8" H20
G140195 690 810 178mm 152mm 354mm 530mm
G160587 930 1070 178mm 178mm 406mm 632mm
Airflow CFM @ Outlet Dia Body Dia Length
6" H20 8" H20
Part No. SINGLE OUTLET MODELS
G200086 1780 2060 254mm 500mm 665mm
G200088 2100 2400 254mm 500mm 798mm
Part No. DUAL OUTLET MODELS
G290052 3340 3800 203mm 500mm 665mm
G290053 3600 4080 254mm 500mm 665mm
G290055 4200 4800 254mm 500mm 798mm
Airflow CFM @ Outlet Dia Body Dia Length
6" H20 8" H20
Part No. WITH PERIPHERAL INLET
G140076 710 840 152mm 356mm 441mm
G161006 1360 1570 203mm 406mm 662mm
Part No. WITH TUBULAR INLET
G161020 1127 1308 152mm 406mm 662mm
Airflow CFM @ Outlet Dia Body Dia Length
6" H20 8" H20
Part No. SINGLE OUTLET MODELS
G200008 1700 1980 203mm 495mm 636mm
Part No. DUAL OUTLET MODELS
G290012 3600 4080 254mm 495mm 636mm
G290023 3340 3800 203mm 495mm 636mm
* Models with 90° outlet
* Air cleaner has an easy to service plastic end cap with clips
PAGE 69
MANN + HUMMEL AIR CLEANERS
IQORON – Two-stage plastic air cleaner (scavenging required)
ENTARON XD - Two-stage plastic air cleaner – Medium Dust
EUROPICLON - Two-stage plastic air cleaner
PICOLINO – Compact & Versatile Air Cleaners, Compressor Air Silencers or Breather Assemblies
VACUUM PUMP AIR CLEANERS – Negative Pressure for Air and Gas Lines
MANN+HUMMEL OEM quality
air cleaner assemblies have
been developed by market needs
and as such are engineered to
suit specific market segments.
MANN+HUMMEL filters stand for
a long service life, reliability, ease
of maintenance and economy.
PAGE 70
MANN + HUMMEL VOKES AIR CLEANERS
Filter Pads, Rolls & Mats
Panel Filters
Bag Filters
Weather Louvers
Available as cut media pads or complete media rolls, air filter media represents a cost effective
solution for use with re-loadable air filter frames.
Used as primary filters for HVAC applications or prefilters for higher efficiency units, panel filters
provide a low cost and compact filtration solution.
Innovative frame and pocket designs mean M&H bag filters offer industry-leading performance and
quality assurance you can rely upon.
Used in coastal areas or marine intakes, weather louvers provide the ultimate defence
against water ingress in the power gen and marine industries.PAGE 71
RACOR TURBINE SERIES FUEL WATER SEPARATORS
Basic Models 500FH/MA 900FH/MA 1000FH/MA 75900FHX/MAX 751000FHX/MAX 791000FHV/MAX
Max Flow Rate 227 LPH 341 LPH 681 LPH 681 LPH 1363 LPH 2044 LPH
Filter Element 2010 Series 2040 Series 2020 Series 2040 Series 2020 Series 2020 Series
Port Size 3/4" - 16 UNF 7/8" - 14 UNF 7/8" - 14 UNF 7/8" - 14 UNF 7/8" - 14 UNF 3/4" - 14 NPT
Height 292mm 432mm 559mm 432mm 559mm 559mm
Width 147mm 152mm 152mm 476mm 476mm 546mm
Depth 122mm 178mm 178mm 279mm 279mm 300mm
Max Pressure 103 kPa 103 kPa 103 kPa 103 kPa 103 kPa 103 kPa
Operating Temp 40° C to 121° C. Heating elements are avilable as optional extras
FH Series
MA Series
** METAL BOWL AVAILABLE FOR MA SERIES ** SIZING GUIDE*: 0 - 325 HP Use 500FH / MA: 325 - 500 HP Use 900FH / MA: 500 - 1000 HP Use 1000FH / MA
*For accurate engine application fuel flow rates, consult your engine manual or engine manufacturer.
Accessories for Model 500 Assemblies
Accessories for Model 900/1000 Assemblies
Universal Accessories
RK23284 - T-handle Vacuum Gauge RK30880 - Water Sensor Kit
RK15279-01 - 500MA Replacement Bowl
RK15405 - 500FH Replacement Bowl
RK11-1606-1 - 900/1000MA Replacement Bowl
RK11-1938 - 900/1000FH Replacement Bowl
RK15211 - Seal/Rebuild Kit
RK11-1404 - Rebuild/Seal Kit
PAGE 73
RACOR FILTERS
Diesel Spin On Filters
Petrol Spin On/Inline Filters
Alternative Fuel (Gas) Filters
Part No. 120A 230R* 445R* 460R* 490R* 4120R*Max Flow Rate 57LPH 114LPH 170LPH 227LPH 341LPH 454LPH
Filter Element R12 R20 R45 R60 R90 R120
Port Size NPT 1/4" - 18 1/4" - 18 3/8" - 18 3/8" - 18 3/8" - 18 3/4" - 16
Height 166mm 229mm 221mm 264mm 286mm 362mm
Width 81mm 102mm 114mm 114mm 114mm 114mm
Depth 81mm 99mm 121mm 121mm 121mm 121mm
Part No. 025-RAC-02 PS120-01^ 120R-RAC-01 320R-RAC-01 660R-RAC-01 SNAPP**Max Flow Rate 95LPH 454LPH 114LPH 227LPH 340LPH 100LPH
Filter Element S2502 R51216 S3240 S3227 S3232 R23298*
Port Size 1/4"-18 NPTF 1/2”NPT 1/4"-18NPTF 1/4"-18 3/8"-18 3/8"
Height 109mm 178mm 165mm 222mm 264mm 198mm
Width 58mm 102mm 81mm 102mm 106mm 97mm
Depth 53mm 79mm 81mm 102mm 114mm 104mm
Part No. FFC-110-06 FFC-112-SAE FFC-110L-10 FFC-112 FFC-113-NF-01 FFC-114Fuel Suitability CNG, LPG CNG CNG, LPG, LNG CNG CNG, LNG CNG, LPG
Port 1/4" NPT 9/16 SAE 1/4" NPT 1/4" NPT 1/2" NPT 1/2" NPT
PSI (max.) 500 PSI 3600 PSI
Rated Flow 25 25 50 15 50 50
Length 182mm 182mm 265mm 120mm 204mm 178mm
Diameter 80mm 80mm 80mm 56mm 76mm 76mm
Material PAINTED STEEL STAINLESS ALUMINIUM STAINLESS
* Integrated priming pump in filter head Note: 2, 10, 30 Micron versions available
^ Has a 200 Micron S/S Strainer element
* Easy to service filter with quick connect fittings
** Specify either 2, 10 or 30 Micron Element when ordering
PAGE 74
FBO filters can utilise three different filter options to meet various requirements:
• WATER SEPARATOR - Removes water and contaminants
• SILICONE TREATED - Removes particle contaminants
• WATER ABSORBER - Absorbs water and filters contaminants
RACOR FBO HIGH FLOW ASSEMBLIES
FBO-10 Micron Separator Particulate Water Absorber
1 FBO 60327 FBO 60330 FBO 60333
5 FBO 60328 FBO 60331 FBO 60334
10 FBO 60353 FBO 60354 FBO 60355
25 FBO 60329 FBO 60332 FBO 60335
FBO-14 Micron Separator Particulate Water Absorber
1 FBO 60336 FBO 60339 FBO 60342
5 FBO 60337 FBO 60340 FBO 60343
10 FBO 60356 FBO 60357 FBO 60358
25 FBO 60338 FBO 60341 FBO 60344
FBO-10 FBO-14
Particulate Flow Rate 94 LPM 113 LPM
Water Sep. Flow Rate 75 LPM 94 LPM
Port Size 1 1/2" NPT
Height 419mm 521mm
Width/Depth 218mm
Max Pressure 150 PSI
Max Temp 71 C
TYPICAL APPLICATIONS:• Service Truck Fuel Dispensing
• Refuelling Stations
• Fuel Dispensing Pumps
• Primary Fuel Filter for Large Diesel
Engines
• Bulk Fuel Handling
• Fuel Transfer
PAGE 75
RVFS HIGH FLOW FILTER VESSELS
RVFS Series vessels are designed to be used in bulk fuel storage,
fuel dispensing, fuel transfer, and large engine applications.
The RVFS will remove emulsified free water and solids from diesel
fuel. When equipped with coalescer/separator filters, water can
be drained and removed from the RVFS sump.
APPLICATIONS:• Jet A, Jet A1
• JP4, JP5, JP8
• Diesel Fuel
• Kerosene
RVFS-1 RVFS-2 RVFS-3
Max Diesel Flow 94LPM 189LPM 283LPM
Port Size 2" NPT 2" NPT 2" NPT
Pressure and Temp 150 PSI @ 71deg C
Height 897mm 1265mm 1621mm
Width 343mm 343mm 343mm
Depth 335mm 335mm 335mm
Coalescer Elements Separator Elements
1 micron 2 micron 5 micron 10 micron 25 micron 5 micron 10 micron 25 micron
RVFS-1 OCP-15854 OCP-15855 OCP-15858 OCP-15868 OCP-15878 SP-15404 SP-15405 SP-15407
RVFS-2 OCP-30854 OCP-30855 OCP-30858 OCP-30868 OCP-30878 SP-30404 SP-30405 SP-30407
RVFS-3 OCP-44854 OCP-44855 OCP-44858 OCP-44868 OCP-44878 SP-44404 SP-44405 SP-44407
PAGE 76
FUEL POLISHING RECIRCULATION FILTER
FBO PORTABLE FUEL FILTER CART Product Advantages
P510MAM
Max. Flow Rate 272 LPH
No. of Ports 2
Port Size M16 - 1.5 ORB
Water Sensor Standard
Micron Rating Avail. 10 or 30
Operating Voltage 12V or 24V
• Removes free and emulsified water before putting into service
• Filters new fuel before putting into service
• Transfers fuel from drums or storage tanks to system reservoirs
• Conditions bulk fuel in storage tanks
Max Flow Rate 40LPM
Filter Assembly FBO-14-DPL
Fuel Suitability Diesel, Petrol, Jet Fuel
Tyres Type Pneumatic
Motor Options* Electric or Air
Primary Element 25 micron Particulate
Secondary Element 10 micron Coalescer
Assembly Water Drain Standard
Water Level Indicator Standard
* Electric Motor options are either 240 VAC or 415 VAC 3phase
PAGE 77
PRELINE FUEL WATER SEPARATORS
RACOR INTERCEPTOR BULK FUEL
PreLine 50 PreLine 100 PreLine 150 PreLine 250 PreLine 270 PreLine 420 PreLine 601
Max Flow Rate 50 LPH 100 LPH 150 LPH 250 LPH 270 LPH 420 LPH 601 LPH
Element PL 50 PL 100/2 PL 150 PL 250 PL 270 X PL 420 X PL 601
Port Size M16x1.5 M16x1.5 M16x1.5 M16x1.5 M18x1.5 M18x1.5 M18x1.5
Height 197mm 247mm 247mm 275mm 326mm 406MM 371mm
Width 102mm 102mm 102mm 102mm 130mm 130mm 130mm
Depth 98mm 98mm 98mm 104mm 125mm 125mm 125mm
Op. Pressure 58 PSI 58 PSI 58 PSI 58 PSI 58 PSI 58 PSI 58 PSI
Water Sep* > 93 % > 93 % > 93 % > 93 % > 93 % > 93 % > 93 %
Model PFHH07500 PFFDH12500Max Flow Rate 56LPM1 189LPM
Port Size 3/4” NPT 1 1/4” NPT
Model PFFDW3525 PFFDW3825 PFFDW51125
Maximum Flow Rate 28LPM 56LPM 189LPM
Max. Working Press. 100 PSI
Suits Head PFHH07500 PFHH07500 PFFDH12500
Micron Rating 25
Height 127mm 203mm 280mm
Solids Capacity 15.6 g 28.7 g 56.5 g
Water Capacity 0.2 L 0.5 L 0.9 L
PAGE 78
DONALDSON FUEL FILTER SELECTION
Head Part No. P562263 P560382 P174785 P562262
Max Flow Rate * 114LPH 114LPH 340LPH 606LPH
Port Sizes 1/2" - 20UNF 1/4" - 18 npt 1/4" NPTF 5/8" SAE
Centre Thread M16 x 1.5 M16 X 1.5 13/16" - 12 1" - 14Element
Example **P550558 - 99% @ 11Mic P550587 - 99% @ 25Mic P556917 - 99% @ 3Mic P551001 - 99% @ 10Mic
Head Part No. P562261 P920682 P174770 P174774
Max Flow Rate* 606LPH 681LPH 946LPH 946LPH
Port Sizes 1/2" NPT 7/8" - 14 7/8" - 14 NPT 3/8" - 18 NPTF
Centre Thread 1" - 14 1 1/4" - 12 1 1/4" - 12 UNF 1 1/16" - 16 UNFElement
Example **P550105 - 99% @ 25Mic P920683 - 99% @ 15Mic P552006 - 99% @ 10Mic P550959 - 99% @ 16Mic
PAGE 79
PARKER REVERSE OSMOSIS WATER-MAKERS
LEISURE MARINE WATERMAKERS Up to 45 feet (Power Boats, Sailboats, Trawlers, Sportfishing)
Mid to Large Sized 40-80 feet (Power Boats, Sailboats, Trawlers, Sportfishing)
Whether you use it to drink, for cooking, to shower, for washing clothing or dishes, or to wash
down your yacht, using a Parker reverse osmosis (R.O.) water-maker system will offer more than
enough potable water for any crew, big or small. Having a water-maker on board will provide
unlimited possibilities for saving money, and increasing leisure time.
Sea Recovery Sea Recovery Horizon Reverse Osmosis
Aqua Whisper Mini Ultra Whisper Seafari Quest
170-750 Gallons Per Day 200-600 Gallons Per Day 200-600 Gallons Per Day
Sea Recovery Sea Recovery Horizon Reverse Osmosis
Aquamatic Aqua Whisper DX Seafari Versatile
450-1,800 Gallons Per Day 450-1,800 Gallons Per Day 450 to 1,800 Gallons Per Day
Horizon Reverse Osmosis Village Marine Village Marine
Seafari Mini LT Series Stowaway Series
170-750 Gallons Per Day 400 to 1,800 Gallons Per Day 400-800 Gallons Per Day
Village Marine Village Marine
Little Wonder Sea Quencher
Up to 145 Gallons Per Day Up to 145 Gallons Per Day
PAGE 80
LEISURE MARINE WATERMAKERS
COMMERCIAL WATERMAKERS
Over 80 feet (Power Boats, Sailboats, Trawlers, Sportfishing)
Sea Recovery Horizon Reverse Osmosis Village Marine
Coral Sea Seafari Versatile LT Series
2,800-6,800 Gallons Per Day 450 to 1,800 Gallons Per Day 400 to 1,800 Gallons Per Day
Village Marine Pure Water Series
Village Marine Pure Water Vertical
Village Marine Pure Water Commercial
400-2,000 Gallons Per Day 800-2,000 Gallons Per Day 3,000-20,000 Gallons Per Day
Sea Recovery Java Sea Series Sea Recovery Coral Sea Series Sea Recovery Tasman Sea T2
925-3,200 Gallons Per Day 2,800-6,800 Gallons Per Day 6,700-24,000 Gallons Per Day
Sea Recovery North Sea Series
Sea Recovery North Sea Modular
Sea Recovery Atlantic Sea Series
11,800-53,000 Gallons Per Day 11,800-53,000 Gallons Per Day 66,000-317,000 Gallons Per Day
Village Marine Village Marine
Little Wonder Sea Quencher
Up to 145 Gallons Per Day Up to 145 Gallons Per Day
PAGE 81
WIX FUEL FILTER ASSEMBLIES
Bulk Fuel Water Separator Housings and Filters
Modular Fuel Systems – Stanadyne Type
*Element sold separately
In-Hose Fuel Filter Assembly for Dispensing Pumps - UL Approved
Part No. Micron Rating Max Flow Port Size Element Fuel Suitability
24003 7 Micron 45 LPM 3/4" NPT 24004 Alcohol/Methanol
24744 24 Micron 45 LPM 3/4" NPT 24044 Alcohol/Methanol
Part No. Micron Rating Max Flow Port Size Element Fuel Suitability
24389 10 Micron 45 LPM 1"-12 NPT 24390 Petrol or Diesel
Part No. Micron Rating Max Flow Port SizeElement
Fuel SuitabilityWater Sep. Water Absorb.
24380* 10 Micron 19 LPM 1" NPT 24043 24042 Petrol or Diesel
WS10103 10 Micron 19 LPM 1" BSP 24043 24042 Petrol or Diesel
Part No. Micron Rating Max Flow Element Fuel Suitability
WF10106 2 Micron 300LPH WF10107 Diesel
24911 5 Micron 300LPH 33911 Diesel
24912 30 Micron 300 LPH 33912 Diesel
PAGE 82
DONALDSON LUBE FILTERS
Filter Head Selection
FULL FLOW FILTRATION - Receive near 100% of the regulated flow in an engine lube system.
BY-PASS FILTRATION - is when a small portion of the system’s oil flow (usually 5 - 10%) is
diverted back to the sump or oil pan before reaching the primary filter. A by-pass filter captures
smaller particles than the full-flow filter.
Head Part No. P561134 P174777* P174780
Max Flow Rate 76LPM 6.62LPM 170LPM
Port Sizes 3/4" - 14 NPTF 3/8" NPT 1 - 1/4" NPT
Centre Thread 1" - 12 UNF 1 3/8" - 16 1 - 1/2" - 12
Element Example** P552819 - 99% @ 40Mic P550777 - 99% @ 23Mic P551670 - 99% @ 23Mic
*Suitable for Bypass Oil Filtration
**Element combinations are far too great to list here. Please contact for selection advice
PAGE 84
Features
RACOR ABS BYPASS OIL FILTERS
SUCTION STRAINERS
Stainless Steel 149 Micron Element
ABS10300 ABS10450
Sump Capacity 28L 48L
Working Press. 72 PSI 72 PSI
Port Size 1/4” NPT 1/4” NPT
Height 317mm 321mm
Width 162mm 204mm
Depth 166mm 206mm
Seal Service Kit ABS44235 ABS44250
3 micron Element ABS20330 ABS20430
5 micron Element ABS20370 ABS20470
10 micron Element ABS25350 ABS25450
• Removes up to 99% of all solid contaminants
• Reduces water concentration to 200 ppm
• 2 to 4 times fewer expensive full flow filters
• Extends the life of all engine components
• Will not void engine warranty
Incorporates Stainless steel Tube and endcap with Glass Filled Nylon Head
Basic Models Thread Max Flow Rate
UCSE1319 1/2" BSPP 15 LPM
UCSE75221110 3/4" BSPP 25 LPM
UCSE1457 1" BSPP, 50 LPM
UCSE1323 1 1/2" BSPP 95 LPM
UCSE1324 1 1/2" BSPP 130 LPM
UCSE1326 2" BSPP 180 LPM
UCSE1219 2" BSPP 225 LPM
UCSE1220 2 1/2" BSPP 350 LPM
UCSE1221 3" BSPP 500 LPM*Suitable for Bypass Oil Filtration
**Element combinations are far too great to list here. Please contact for selection advice
PAGE 85
RELATIVE SIZES OF PARTICLES
PARKER ORIGINAL-FIT AND PAR-FIT ELEMENTS
TYPICAL HYDRAULIC COMPONENT CLEARANCES
Different Media Types
Is Using That Cheap Element Really Worth It When You Consider:
Parker’s quality range of elements extends beyond just those to fit Parker genuine assemblies so
now you have the ability to utilise a Parker quality element in the following competitor’s housings:
• Hydac
• Eaton (Internormen)
• Bosch Rexroth (Eppensteiner)
• Donaldson
• Pall
• Mahle
• Argo
• MP Filtri
Component Microns
Anti-friction bearings 0.5
Vane pump (vane tip to outer ring) 0.5-1
Gear pump (gear to side plate) 0.5-5
Servo valves (spool to sleeve) 1-4
Hydrostatic bearings 1--25
Piston pump (piston to bore) 5-40
Servo valves flapper wall 18-63
Actuators 50-250
Servo valves orifice 130-450
Substance Microns
Grain of table salt 100
Human hair 70
Lower limit of visibility 40
Milled flour 25
Red blood cells 8
Bacteria 2
Media Material Capture Efficiency Dirt Holding Capacity Element Life Initial Cost
Fibreglass High High High Moderate
Cellulose (Paper) Moderate Moderate Moderate Low
Wire Mesh Low Low Moderate High
PAGE 86
RELATIVE SIZES OF PARTICLES
PARKER FILTER ASSEMBLIES Low Pressure Spin On Assemblies
Tank Top Return Assemblies
Medium Pressure Inline Assemblies
High Pressure Inline Assemblies
AT SERIES MAXIFLOW SERIES
Basic Models 12AT 50AT1 50AT2 MXA8 MXA9 MXA7Port Size 3/4" UNO 1 1/4" UNO 1 1/4" UNO 3/4" BSP 1 1/4" BSP 1 1/2" BSP
Max Pressure 10 Bar 10 Bar 10 Bar 10 Bar 10 Bar 10 Bar
Max Flow 45 lpm 125 lpm 150 lpm 30 lpm 80 lpm 140 lpm
Bypass 1.7 Bar 1.7 Bar 1.7 Bar 1.05 Bar 1.05 Bar 1.05 Bar
PT TANK TOP MODUFLOW TANK TOP
Basic Models PT2-1 PT2-2 PT4-1 PT4-3 TFP1 / RFP1 TFP2 / RFP2Port Size 3/4" BSP 3/4" BSP 1 1/4" BSP 1 1/4" BSP 2" SAE Flange 2" SAE Flange
Max Pressure 5 Bar 5 Bar 5 Bar 5 Bar 10 Bar 10 Bar
Max Flow 45 lpm 90 lpm 130 lpm 200 lpm 320 lpm 460 lpm
Bypass 1.7 Bar 1.7 Bar 1.7 Bar 1.7 Bar 2.4 Bar 2.4 Bar
INLINE CN SERIES INLINE MODUFLOW
Basic Models 15CN1 15CN2 40CN1 40CN2 80CN1 80CN2 ILP1 ILP2Port Size 1" BSP 1" BSP 1 1/2" BSP 1 1/2" BSP 2" SAE Flange 2" SAE Flange 2" SAE Flange 2" SAE Flange
Max Pressure 69 Bar 69 Bar 69 Bar 69 Bar 69 Bar 69 Bar 10 Bar 10 Bar
Max Flow 35 lpm 45 lpm 180 lpm 280 lpm 380 lpm 550 lpm 320 lpm 460 lpm
Bypass 3.5 Bar 3.5 Bar 3.5 Bar 3.5 Bar 3.5 Bar 3.5 Bar 2.4 Bar 2.4 Bar
100P SERIES WPF SERIES
Basic Models 100P2 WPF2 WPF4 WPF5Port Size 2" SAE Flange Manifold Mount Manifold Mount Manifold Mount
Max Pressure 414 Bar 470 Bar 470 Bar 470 Bar
Max Flow 1000 lpm 30 lpm 150 lpm 180 lpm
Bypass 7 Bar 3.5 Bar 3.5 Bar 3.5 Bar
Substance Microns
Grain of table salt 100
Human hair 70
Lower limit of visibility 40
Milled flour 25
Red blood cells 8
Bacteria 2
PAGE 87
B
C
E
A
D F
OIL LEVEL GAUGES
Fluid Level Gauges
Sight Glass Plugs
Prism Sight Glass Plugs
MATERIAL: Shatterproof, transparent polyamide
FLUID COMPATIBILITY: Mineral and petroleum based oils
THERMOMETER SCALE: -30°C to +90°C.
• Transparent polyamid lens
• Operating temperature 210oF / 100oC
• For use with mineral, petroleum and water-based fluids
• Working pressure 29 PSI
• Max operating temp. 260oC
• Working pressure 500 psi
• Suitable for petroleum and water-based fluids
• Nickel-plated steel construction
FLUID LEVEL
Part No. UCFL111 UCFL113 UCFL211 UCFL213 UCFL311 UCFL313
Mounting Centres 76mm 76mm 127mm 127mm 254mm 254mm
Thread M10 M12 M10 M12 M10 M12
Max Pressure 1 BAR
FLUID LEVEL/TEMPERATURE
Basic Models UCFLT121 UCFLT123 UCFLT221 UCFLT223 UCFLT321 UCFLT323
Mounting Centres 76mm 76mm 127mm 127mm 254mm 254mm
Thread M10 M12 M10 M12 M10 M12
Max Pressure 1 BAR
Part No. Thread Dim. B Dim. C Dim. D Dim. E Dim. F
P562419 1/4" BSP 9mm 18mm 7mm 15mm 6mm
P562420 3/8" BSP 11mm 22mm 8mm 19mm 7mm
P562421 1/2" BSP 14mm 26mm 8mm 22mm 8mm
P562426 3/4" BSP 20mm 31mm 9mm 27mm 10mm
Part No. Thread Dim. B Dim. D Dim. E Dim. F
P562412 1" NPT 24mm 24mm 35mm 8mm
P562414 1-1/2" NPT 37mm 21mm 51mm 11mm
P562415 2" NPT 48mm 22mm 64mm 11mm
PAGE 88
PARKER AIR BREATHERS40mm Threaded Plastic Breather
Triceptor Dessicant Breather (Water Absorbing)
70mm Threaded Plastic Breather
Metal Filler Breather - Flange Mount With Strainer
EAB Replacement Element Breathers
Basic Models AB683101UC AB68X101UC AB68Y101UC AB68Z101UC
Thread Size 1/4" BSPP 3/8" BSPP 1/2" BSPT 3/4" BSPT
Micron 10 micron
Pressurised No No No No
Basic Models 934330TX1 934332TX1 937546 937463
Micron 3 Micron 3 Micron Field Adaptor Flange Adaptor
Length 127mm 229mm 35mm -
Connection 1" NPT Male 1" NPT Male 1" NPT Female -
Basic Models UCSAB5101 UCSAB6101 UCSAB7101
Thread Size 3/8" BSPP 1/2" BSPP 3/4" BSPP
Micron 10 micron
Pressurised No No No
Basic Models UCAB116310 UCPAB1730105 UCPAB17301010 UCAB138010 5561
Connection 6 Screw 6 Screw 6 Screw 3 Screw 6 Screw
Diameter 76mm 76mm 76mm 44mm 76mm
Micron 10 micron
Pressurised No 0.35 Bar 0.7 Bar No No
HOUSINGS REPLACEMENT ELEMENTS
Basic Models EAB20C015HC73A EAB20C015GE16A EAC20Q010 EAC20P020 EAC20C015
Connection 6 Hole mount 1" BSP mount
1 Micron Glass Fibre
2 Micron Cellulose
1.5 Micron Water Res
Micron 1.5 micron 1.5 micron
Flow Rate 2000 l/min 2000 l/min
PAGE 89
PAR-GEL ELEMENTS
The Problem
The Solution
Water Absorbing Media
Fluids are constantly exposed to water
and water vapour while being handled
and stored. Water can also get into the
system via worn cylinder and actuator
seals, or through reservoir openings.
Using a Par-Gel water removal element is an effective way of removing free water contamination
from your hydraulic system. It is highly effective at removing free water from mineral-base and
synthetic fluids.
Parker Par-Gel water removal filter elements are available in these standard Parker filter housings:
Parker Housing P/N Par-Gel Element
40CN-1 931412
40CN-2 931414
80CN-1 931416
80CN-2 931418
Guardian® Single 932019
Moduflow (10MFP) 940734
Photo above shows ‘swolen’ Par-Gel filter
media with absorbed water.
Photo above shows ‘dry’ Par-Gel filter media.
PAGE 90
GUARDIAN® PORTABLE FILTRATION SYSTEMDrum to Drum Filter Assembly
MODUFLOW PORTABLE FILTER CARTS
The Guardian portable filtration system is a unique pump/motor/
filter combination designed for conditioning and transferring
petroleum-based fuels, water emulsions and diesel.
• Heavy-duty frame but still lightweight and portable.
• Wide variety of particulate elements available
• Choice of either an Air Motor or Electric Motor
(240VAC or 415AC 3 Phase)
Part No. GT4E10Q6 GT4D10Q6 Motor 240 VAC 24 VDC
Max Press. 50 PSI 50 PSI
Max Flow 15 LPM 15 LPM
Weight 10.6Kg 10.6Kg
Hose Lengths 1.5m 1.5m
Wand Length 0.9m 0.9m
Noise Level <70db at 3ft <70db at 3ft
Element Inc. 10 Micron 10 Micron
Part No. 5MFP 10MFPMax Flow Rate 19LPM 38LPM
Height 1034mm 1034mm
Width 648mm 648mm
Depth 503mm 503mm
Weight 503mm 503mm
3m Hose/Wand Standard Standard
Drip Tray Bunding Standard Standard
Tank Size Cleanliness (ISO) Time Required190 Litres 20/18/15 0.5 Hours
190 Litres 17/15/12 1 Hours
190 Litres 16/14/11 2.5 Hours
378 Litres 18/16/13 1.5 Hours
378 Litres 17/15/12 2.5 Hours
378 Litres 16/14/11 4 Hours
757 Litres 19/17/14 2.5 Hours
757 Litres 18/16/13 3.5 Hours
757 Litres 17/15/12 5 Hours
The results in the chart are based on the following assumption:
1. Initial contamination level is 500,000 particles greater than 10 micrometers per 100 ml of fluid (10MFP trolley).
2. Inlet filter fitted with 40SA element; outlet with 20Q element.
3. System ingression rate equal to 1 X 106 particles greater than 10 micrometers entering the system per minute
Features
Filter Cart Performance
PAGE 91
www.epe.net.auVIEW OUR CATALOGUE ONLINE
Engine Protection Equipment Pty, Ltd70 Horus Bend, Bibra Lake, Western Australia 6163
Ph: 08 9330 7444 Email: [email protected]