Foot operated pedal P15 - W. Gessmann Industrial Controllers · Isolation and Hhgh voltage test...
Transcript of Foot operated pedal P15 - W. Gessmann Industrial Controllers · Isolation and Hhgh voltage test...
1
Foot operated pedalP15
page 12
V20
16/1
16.
02.2
016
Technical details may vary based on configuration or application! Technical data subject to change without notice!
Gessmann’s foot operated pedal P15 is specially designed for usage in railway applica-tions.Their robust design which is based on the relevant standards EN-60077 and EN-50155 guarantees low life cycle costs and a maintainability over period of 35 years.
Technical data
Ambient temperature outside vehicle -40°C to +50°C -> EN 50 155 Class T1, T2, T3, TX
Shock and vibration According to EN 61373
Isolation and Hhgh voltage test According to EN 50155
Pollution degree PD 3 according to EN 60077-1 (others on demand)
Fire and smoke Compliant to EN 45545 (others on demand)
Mechanical endurance 10 million operating cycles
Electrical endurance Minimum operating cycle class C3/A3 according to EN 60077-2
P15 C1 I C01
Basic Unit
P15 Foot operated pedal
Output Signal
C1 1 Contact
C2 2 Contacts
Interface
I1 Cable with connector*
I2 Cable without connector*
*Customer specific lenght
Cable outlet
C01 Left side
C02 Bottom side
Example
1
Foot operated pedalP15
page 13
Technical details may vary based on confi guration or application! Technical data subject to change without notice!