Food Processing - Villa Lighting Supply, Inc. · 2016. 2. 22. · 80 Color Rendering Index. FP-D...
Transcript of Food Processing - Villa Lighting Supply, Inc. · 2016. 2. 22. · 80 Color Rendering Index. FP-D...
Food
Pro
cess
ing
LED
and
Flu
ores
cent
LED
and
Flu
ores
cent
Bakery | Food Zone | FP Series
Dairy ProcessingDaily high pressure washdown. Strong chemical sanitizers.Cool and wet conditions.Regular USDA inspections.NSF required. High light levels (50 fc, 540 lux).
Frozen Food ProductionWalk-in Coolers/Freezers Cold lamp starts.Low light output and color shift. Condensation and Corrosion.NSF required. Refrigeration Costs.
Meat PackingDaily high pressure washdown. Strong chemical sanitizers.Cool damp operations.Regular USDA inspections.NSF required. High light levels (50 fc, 540 lux).
BakeryHigh temperatures (up to 200F).Hazardous Locations .Heat Enbrittlement of lens.NSF required. High light levels (50 fc, 540 lux).Color Rendering, High CRI.
Solution: FP-S-3HD1700 and IP-66 for water resistance. Stainless Steel construction. Low temperature with EBL option.Meets USDA and FDA requirements. NSF Food Zone Listed. Highest Efficiency troffers.
KL Series- One piece overlapping doorframe KL-F-2-2X4 Shown
Solution: FP-F-4High temperature construction.Haz. Loc. dust tight classified. Stainless and Aluminum.NSF Non-Food Zone.Reduced Heat, No infrared80 Color Rendering Index.
FP-D Series- Provides a durable surface mount food zone choice FP-D-2-40 Shown
Solution: FP-D-2Low temperature ballasts.High power LEDs.Stainless and aluminum.NSF Non-Food Zone.Reduced heat, no infrared.
Solution: FP-F/TR-2Top relamping and servicing. HD1700 and IP-66 for water resistance. Stainless Steel exposure. Designed for walkable ceiling systems.Meets USDA and FDA requirements. NSF Food Zone Listed.
FP-F/TR Series- Best in cleanroom and food zone features combined with top access.
FP-S Series- Extreme corrosion and moisture resistance FP-S-3-2X4 Shown
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
209E1
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
1700PSI
Hosedown
NSFFOOD ZONE
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
209E1
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
1700PSI
Hosedown
NSFFOOD ZONE
ISO5
ISO 14644-1CLASS 5
IP55
IEC 60529
WET LOCATION
209E1
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
NSFFOOD ZONE
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
209E1
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
1700PSI
Hosedown
NSFFOOD ZONE
Specifications:
Food Processing Series1x4, 2x2 and 2x4 High Efficiency Sealed Luminaires NSF listed, Certified for ISO-3, 209E Class 1 Cleanspaces
Housing: One piece, seam welded, hole free 20-gauge CRS, stainless steel or aluminum con-struction. Each are only 4.5 inches tall. Door Frame: One-piece overlapping style 18-gauge CRS , 20-gauge type 304 stainless steel or aluminum door frame with 90° hinged to housing with two stainless steel cables. Secured by captive stainless steel screws.Sources: T5, T5HO, T8 and high efficiency LED ar-rays (Lamps supplied by others.)Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 92%).Lens: High durability .135” thick virgin acrylic with P12 prismatic pattern inverted. Sealed to door with NSF listed RTV silicone. See “Options” for other choices. Installation: Flanged: Adjustable toggle arm mounting standard. Supply entry via 1/2” trade size flattened and silicone sealed knockouts.Installation: Grid: Standard luminaires accommo-date 1.0” & 1.5” and some 2.0” T-Bar Grid. Installation: Surface: Four .312” dia. mounting
holes and a removable gasketed wiring access plate. Gaskets: NSF Listed closed cell microcellular ex-truded KleanLock SealPro gasket with vulcanized corners making a one-piece oil and solvent resistant gasket system. Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially avail-able high efficiency and dimmable with 0-10v control. Suitable for through wiring.Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all recessed housings. Stainless steel doorframes and surface housings are satin polished unless option WHT is chosen. Listings: UL and CUL listed for wet locations. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA in-spected facilities. Certified ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1. See “Options” for Class I, Div. 2 Groups A, B, C & D Listing (X12) & Class 1, 2 & 3 Div. 2 & 3 Groups A, B, C, D, F & G Listing (X22). Bio-Safety levels 3 & 4. Rated for 1700 PSI hosedown.
Surface Section View
4.8”
Grid Section View
4.5”
Flange Section View
4.5”
ISO3
ISO 14644-1CLASS 3
IP66
IEC 60529
WET LOCATION
Standard
209E1
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
Optional
NSFC-2 FOOD ZONE
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
FF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* H/EM = 1 Lamp Hazardous Battery Pack WHT= White Finished Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass X12= Class I, Div. 2, groups A, B, C, D listing.*X22= Class 2, Div. 2 & 3, groups A, B, C, D, F & G list-ing.* (Not available in Surface Mounted)SW= Sealed Wireway (contact Kurtzon for details)† = SS Hsg. not available with 6/T5HO
Series Installation Type Material Size Source Voltage Options
FP - - - - / - -
120V 277V 347V* UNV*
FP F = Flange G = Grid S = Surface
Qty/Type
Ordering Information: (Example: FP-F-4-1x4-2/T5-UNV-FF)
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door5= AL Hsg. & AL Door6= CRS Hsg. & AL Door
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*
* Note: Not all options are compatible with other options. Consult factory for additional lamp choices & options marked "*".
2, 3, 4 or 6/T5 = F14T5 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT
2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT
Fluorescent LED Arrays
25 Year
Warranty
NSFNON FOOD ZONE
FP-HB Food Processing Series8 Lamp Sealed High Bay Luminaires for Pendant or Surface InstallationISO-5, 209E Class 100 CleanspacesSpecifications:
30”
4.45”
2”
30”
48”
Uplight Option
IP65
IEC 60529
NSFNON FOOD ZONE
Ordering Information: Example: FP-HB-3-40-8/T5HO-120V-CA-CP5-15P
Series Installation Type Material Size Lamps Voltage Elect. Options General Options
FP - HB - - 40 - - - -
40 = 30”x48” Housing
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door ‡4 = AL Hsg. & SS Door5 = AL Hsg. & AL Door6 = CRS Hsg. & AL Door
120V277V347V*UNV*
FP HB = Sealed Highbay
* Note: Not all options are compatible with every option. Consult factory for additional
Lamp options & options marked "*".
** Note: Cord and plug options are not water tight connections. A sealed cord bushing is
provided at the fixture when a cord is specified. Replace the "x" above with the NEMA cordset designation. 5-15P is standard for 120v and 7-15P is for 277v. For wet locations cordsets and other cord options please contact the factory. ‡ Only #3 material is NSF Food Zone. All other materials are non-food zone.
6 or 8/T8 = F32T8 32W T8 (G13) 0°F Starting 6 or 8/T5 = F28WT5 28W T5 (G5)* 0°F Starting6 or 8/T5HO = F54WT5 54W T5HO (G5)* -20°F Starting
TP = Stainless Steel Tamperproof FastenersWHT = White Finished Stainless SteelHD1700 = 1700 psi HosedownHIA = .140" P12 High Impact AcrylicCP = .125" Clear Smooth PolycarbonateLEX = .125" P12 Prismatic PolycarbonateOCC = Wet Location Occupancy SensorLz = Lamps Provided (“z”= lamp details)UPL= 5% Uplight, Sealed Lenses (2) Cord OptionsCPx = Six Foot Cord and Plug(**)LCPx = Six Foot Locking Cord and Plug(**)
FF = Fuse & HolderFD = Double Fuse & Holders2/EB = Two Ballasts, (Two Circuits) EBL = -20°F Electronic BallastEBPRS = Program Rapid Start BallastEBDIM = Electronic Dimming BallastHLO = High Light Output Ballast (>1.15 BF)* 1/EM = 1 Lamp Battery Pack (700L)2/EM = 1 or 2 Lamp Battery Pack (1400L)*
ISO5
ISO 14644-1CLASS 5
209E100
FED STD 209ECLASS 100
Housing: Optimized for water shedding, one piece 20 ga. welded stainless steel or aluminum. Seam welded seams. Door Frame: One piece 20-gauge alumi-num or type 304 stainless steel one piece inset door frame hinged to housing with 2 stainless steel cables. Secured by captive stainless steel screws. Hose Down 1700 PSI optional.Lens: Clear .125” thick virgin acrylic set in NSF silicone sealant. Electrical: Standard two, four lamp instant start ballasts for T8. Electronic less than 10% THD high performance instant start univer-sal voltage (120-277 volt). See options for other choices.Reflector: High reflectance white (92% refl.) white polyester powder coatings over steel. Lamps: T8 or T5HO type. Lamps are supplied by others unless specified below.Gaskets: NSF listed closed microcellular ex-truded one piece SealPro gasket seals door frame to housing. Oil and solvent resistant gasket system.
Installation: Pendant, Y-Cable or Chain mount systems available. Power entry through sealed access plate knockouts on rear of fixture at center.Finish: White polyester powder coating over steel, and aluminum housings. Rated 1000hr Salt spray corrosion protection over steel. Stainless steel housings and door frames are satin polished.Listings: UL & CUL listed for wet locations. IP-65 water and dust protection. Federal Standard 209E, ISO 14644-1 Class 5, Clean-room rated class 100. NSF Non-Food zone. NSF Food Zone for stainless steel construc-tion. (NSF Listing pending).
WET LOCATION
Standard
BSL3 & 4
Bio Safety LevelsBio-Safety
Optional
NSFC-2 FOOD ZONE
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
25 Year
Warranty
20 = 2' Housing
40 = 4' Housing
T8 = F17T8 (G13) T5 = F14WT5 (G5) T5HO = F24WT5 (G5) 1, 2 or 3/LEDR35 = 2200 Lumen Array(s)1, 2 or 3/LEDR40 = 2200 Lumen Array(s)
1 or 2/T8 = F32T8 (G13) 1 or 2/T5 = F28WT5 (G5) 1/T5HO = F54WT5 (G5) 1, 2 or 3/LEDR35 = 4400 Lumen Array(s)1, 2 or 3/LEDR40 = 4400 Lumen Array(s)
80 = 8' Housing 2, 4, 6 or 8/T8 = F32T8 (Tandem)2, 4, 6, or 8/T5HO = F54WT5HO (Tandem)
Specifications: Housing: Double channel housing of 20-gauge CRS, type 304 stainless steel or aluminum construction.
End Caps: Precision stamped 20-gauge type 304 stainless steel end caps secured to hous-ing with standard stainless steel fasteners or optional hub assembly.
Gasket: Closed cell extruded SealPro™ NSF Listed gasketing. Resists grease and solvents.
Reflector: High reflectance white powder coat finished (min. reflectivity 88%).
Lens: (Standard) Smooth surface .125" White/Opal high impact blend virgin acrylic. Linear clear prismatic polycarbonate optional (LPx )Sources: T5, T5HO, T8 and high efficiency LED arrays (Lamps supplied by others.)
Options
FF = Fuse & HolderFD = Double Fuse & Holders2/EB = Two Ballasts, (Two Circuits) EBL = -20°F Electronic BallastEBPRS= Program Rapid Start BallastEBDIM= Electronic Dimming BallastHLO= High Light Output Ballast* 1/EM = 1 Lamp Battery Pack (700L)2/EM = 1 or 2 Lamp Battery Pack (1400L)*CRM = Custom Row Mounting*TP = Stainless Steel Tamperproof FastenersSSH = Stainless Hubs (2) for Feed Thru SupplyHD85 = 85 P.S.I. Hosedown*WHT= White Finished Stainless SteelPMB= Pendant Mount Bracket
Qty/Type
* Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. Consult factory for multiple op-tions marked "*". ‡ Housings made of CRS or Aluminum are NSF Non-Food Zone.◊ Not available in 8 foot size.
Ordering Information: Example: FP-LPD-3-40-4/T8-UNV-FF
FP - - - - - -
Series Lens Profile Material Size Lamps Voltage
FP 1 = CRS External & Internal 120V 2 = SS Ext. & CRS Internal 277V 3 = SS External & Internal 347V* 4 = AL Ext. & CRS Internal UNV
4.50"
3.7"
9.00"
4.00"2.6"
8"
6"
5.5"
FP-A-1 FP-B-4
FP-LPC-3 FP-D-1
Electrical: Standard ballast - Electronic less than 10% THD high performance instant start (0°F) universal voltage (120-277 volt). See options for other choices.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless.
Installation: Four .312” debossed holes for surface mounting. One .875” (1/2” trade-size) flattened and silicone sealed knockout located on back of housing for wiring. See below for other mounting and supply entry options. Rows: Joiner bands provided for continuous row mounting (See Option: CRM). Please specify number of fixtures in each run.
Listings: UL and CUL Listed for Wet Location. Rated IP-55 dust and water resistance. NSF Listed for Food, Splash and Non-Food zones.
(Blank)= Opal ArcylicLP= Linear Prismatic (Clear Polycarbonate)
WET LOCATION
Standard Optional
NSFC-2 FOOD ZONE Hazardous Location
Class 1 Division 2
25 Year
Warranty
85 PSI
HOSE DOWN
RATED
IP55
IEC 60529
Food Processing Series 2’ , 4’ and 8’ Acrylic Food Zone Wraps Luminaires for Surface InstallationNSF listed, IP-55 Rated, Wet Location
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
A = 1 or 2 Lamps 1 LED ArrayB = 2 Lamps 2 LED ArraysC = 2 Lamps ◊ 2 LED ArraysD = 3-4 Lamps 2 LED Arrays
Profile “A”
Profile “C”
Profile “B
Profile “D”
Standard
NSFC-2 FOOD ZONE
ISO3
ISO 14644-1CLASS 3WET LOCATION
209E1
ISO6
ISO 14644-1CLASS 6
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
IP66
IEC 60529
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Kurtzon Lighting / Innovtors in Lighting Since 1898 Morris Kurtzon, Incorporated1420 South Talman Avenue, Chicago, Illinois 60608773/277-2121 FAX 773/277-9164 © 2013Website - www.kurtzon.com
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
FP
Specifications:
Housing: One-piece, seam welded, hole-free 20-gauge CRS or type 304 stainless steel or aluminum construction.
Door Frame: One-piece 18 gauge CRS or 20 gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8" stainless steel aircraft cables. Door frame National Sanitation Foundation (NSF) gasketed to housing and secured with 12 captive flush mounted stainless steel fasteners.
Reflector: Full reflector panel white powder coat finished (minimum reflectivity 88%).
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern. Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Sources: T5, T5HO, T8 and LED (Lamps supplied by others.)
Electrical: Standard ballast - Electronic <10% THD high performance instant start universal voltage (120-277 volt). LED drivers are commercially available high efficiency and dimmable with 0-10v control. Suitable for through wiring.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless.
Installation: Four .312" holes for corner mounting. Two .875" flattened and silicone sealed knockouts for wiring. See Options for Continuous Row Mounting (CRM), Custom Corners (CC) and Custom Blank Fillers (CBF).
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated IP-66. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class 1. See "Options" for Class I, Div. 2 Groups A, B, C & D Listing (X12). Bio Safety levels 3 & 4. Rated at 1700 PSI Hosedown.
7.50”
7.50”
Cross Section
8.44”
36.0”
3.75”
Installation Detail
48.125”
7.50”
(4) .312” Holes
(2) .875” KO's
(Top & Rear)
40 = 4’ Housing
Ordering Information:
KL - COR - - - - -
Series Installation Type Material Size Source Voltage
KL COR = Corner 1 = CRS Hsg. & CRS Door 120V 2 = CRS Hsg. & SS Door 277V 3 = SS Hsg. & SS Door 347V* 4 = AL Hsg. & SS Door UNV*
Options
FF = Fuse & HolderFD = Double Fuse & Holders2/EB = Two Ballasts, (Two Circuits) EBL = -20°F Electronic BallastEBPRS= Program Rapid Start BallastEBDIM= Electronic Dimming BallastHLO= High Light Output Ballast* 1/EM = 1 Lamp Battery Pack (700L)2/EM = 1 or 2 Lamp Battery Pack (1400L)*GG = N.S.F. Listed Gasketing CRM = Custom Row Mounting*TP = Stainless Steel Tamperproof FastenersWHT= White Finished Stainless Steel
* Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. Consult factory for multiple options marked "*".
Food Processing Series4’ Corner Mount Luminaires with T5, T5HO, T8 and LED Sources Certified for ISO-3, 209E Class 1 Cleanspaces
Standard
NSFC-2 FOOD ZONE
ISO3
ISO 14644-1CLASS 3WET LOCATION
209E1
ISO6
ISO 14644-1CLASS 6
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
IP66
IEC 60529
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Kurtzon Lighting / Innovtors in Lighting Since 1898 Morris Kurtzon, Incorporated1420 South Talman Avenue, Chicago, Illinois 60608773/277-2121 FAX 773/277-9164 © 2013Website - www.kurtzon.com
OptionsFF = Fuse & HolderFD = Two Fuses & Holders2/EB = Two Ballasts, (Two Circuits)* EBL = -20°F Electronic Ballast*EBPRS= Program Rapid Start Ballast*1/EM = 1 Lamp Battery Pack (700L)*2/EM = 2 Lamp Battery Pack (1300L)* WHT= White Stainless Steel Door & Hsg. LEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic TG= Prismatic (C73) Tempered Glass † = SS Hsg. not available with 6/T5HO
Series Installation Type Material Size Source Voltage
FP - /EZ - - - / - -
120V 277V 347V* UNV*
FP S/EZ = Surface † F/EZ = Flange G/EZ = Grid (1 & 1.5”)
Ordering Information: (Example: KL-F/EZ-1-1x4-2/T5-UNV-FF)
1 = CRS Hsg. & CRS Door2 = CRS Hsg. & SS Door 3 = SS Hsg. & SS Door4 = AL Hsg. & SS Door
1x4 = 1'x4’ Housing
2x2 = 2’x2’ Housing
2x4 = 2’x4’ Housing
1, 2 or 3/T8 = F32T8 1, 2 or 3/T5 = F28T5* 1 or 2/T5HO = F54T5HO*
2, 3, 4 or 6/T8 = F32T82, 3, 4 or 6/T5 = F28T5* 2, 3, 4 or 6/T5HO = F54T5HO*
* Note: Not all options are compatible with other
options. Consult factory for additional lamp
choices & options marked "*".
2, 3, 4 or 6/T5 = F14T5 2, 3, 4 or 6/T5HO = F24T5HO*2, 3, 4 or 6/T8 = F17T8 1 or 2/T8U6 = T8 6” U-Lamp2 or 3/T8U1 = T8 1.6” U-Lamp 2, 3 or 4/BX = PL-L, BX 40W*
1 or 2/LEDR30 =4400L 3000k CCT1 or 2/LEDR35 =4400L 3500k CCT1 or 2/LEDR40 =4400L 4000k CCT
2 or 3/LEDR30 =2200L 3000k CCT2 or 3/LEDR35 =2200L 3500k CCT2 or 3/LEDR40 =2200L 4000k CCT
2 or 3/LEDR30 =4400L 3000k CCT2 or 3/LEDR35 =4400L 3500k CCT2 or 3/LEDR40 =4400L 4000k CCT
Fluorescent LED Arrays
FP
Specifications:
Housing: One piece, seam welded, hole free 20-gauge CRS or stainless steel construction.
Door Frame: One-piece 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8"" stainless steel aircraft cables. Secured by 6 captive stainless steel torsion springs. Lockup system provides 1700 PSI hose down water resistance.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 88%)
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern. Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Lamps: Select lamp options listed below. Lamps supplied by others.
Electrical: Standard ballast - Electronic less than 10% THD high performance instant start universal voltage (120-277 volt). See options for other choices.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel finish. See Options for white powder coated stainless.
Installation: Four .312" holes for surface mounting. Flanged fixtures use yoke system for support. Grid fixtures are compatible with 1.0 and 1.5” T-Grid sys-tems. At least two .875" flattened and silicone sealed knockouts for wiring. See below for mounting options.
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated IP-65. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E Class 1. Bio Safety levels 3 & 4.
Food Processing SeriesScrewless Door Frame with T5, T5HO, T8 and LED Sources NSF listed, Certified for ISO-3, 209E Class 1 Cleanspaces
Cross Section
4.50”
24.0” x 48.0” Cross SectionYoke
24.75”x 49.25”
4.50”
(Standard)
Cross Section
24.0” x 48.0”
5.0”
Standard
NSFC-2 FOOD ZONE
ISO3
ISO 14644-1CLASS 3
209E1
ISO6
ISO 14644-1CLASS 6
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
IP66
IEC 60529
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Kurtzon Lighting / Innovtors in Lighting Since 1898 Morris Kurtzon, Incorporated1420 South Talman Avenue, Chicago, Illinois 60608773/277-2121 FAX 773/277-9164 © 2013Website - www.kurtzon.com
Food Processing Series2x2 LED Top Access Highbay Luminaires for IMP Installation FP
2x2 = 2'x2’ Housing 4/LEDT657 = 6000 Lumen arrays 5700K CCT
Ordering Information:
FP - IMP - - 2x2 - 4/LEDT657 - -
Series Installation Type Material Size Lamps Voltage
FP IMP = Recessed 1 = CRS Hsg. & Trim ‡ 120V Insulated Metal Panel 2 = CRS Hsg. & SS Trim 277V 347V UNV
Options
FF = Fuse & HolderFD = Two Fuses & HoldersLEX = .125” Prismatic Polycarbonate A19= Prismatic P19 Pattern Clear AcrylicHIA= High Impact P12 Pattern Acrylic WHT= White Finished Stainless Steel
Certified for ISO-3, 209E Class 1 CleanspacesSpecifications:
Housing: Three piece, welded, hole free 20-gauge CRS stainless steel or aluminum construction. Electrical section is secured by latches for easy installation and servic-ing.
Trim Frame: One-piece 18-gauge CRS or type 304 stainless steel trim frame is not removable the room side for a sure seal. Trim Frame secured to the housing by 12 #12-24 screws installed from above. The seal is rated for 1700 PSI hose down (HD-1700). All hardware is consealed for cleanability.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Heat Sink: Extruded aluminum high efficiency finish. Located on the fixture top.
Reflector: Die formed metal with high reflectance white polyester powder coat finish. (minimum reflectivity 91%)
Lens: High durability .125" thick virgin acrylic with standard clear flat (no prisms)finish. See options for inverted high impact P12 prismatic pattern. All lenses are sealed to trim frame with NSF listed RTV silicone.
LEDs: Four Philips Fortimo Series HBMt 6000-54w-757 high brightness arrays that consist of 40 Luxeon LXA7-PW57 LEDs. CRI is rated at >70 for good color recogni-tion. Commercial available arrays provides obsolesnece protection.
Electrical: Standard driver(s) - Electronic less than 20% THD high performance constant current programable and dimmable (0-10v). High power factor rated >.95, with a supply voltage: 120-277 50-60hz and zero (0) off state power. Integral thermal protection feedback system allows assurance of long LED life and a 5 year manufacturer warranty. The remaining parts carry a 25 year Kurtzon warranty. See warranty statement for details.
Finish: White powder coat finish (1,000 hour salt spray test) or 4-B (satin polish) stainless steel trim finish. See Options for white finished stainless trim.
Installation: Two .875" supply entrances for conduit connection. See below for mounting options.
Listings: ETL Listed for Wet Location. Dust and water resistance rated IP-66. NSF -C2 listed for food zone.‡ Suitable for use in FDA & USDA inspected facilities. Certi-fied ISO-14464-1 classes 3 to 9 Fed. Std. 209E Class 1.
* Note: Not all options are compatible with every option. Consult factory for multiple op-tions marked "*". ‡ Trims made of CRS are NSF Non-Food Zone.
Input RatingsVolts: 120-277Amps: 2.0 (@120v) .898 (@ 277v)Watts: 231.8 (@120v) 231.1
FP
Specifications:
Housing: One piece, seam welded, hole free 20-gauge CRS construction. Gasketed top cover allows all services from above. Fully white powder coated.
Door Frame: One-piece 18-gauge CRS or 20-gauge type 304 stainless steel door frame with 90° bevelled edges. Door frame suspended from housing by two 8"" stainless steel aircraft cables. Secured by 12-14 captive stainless steel screws.
Gaskets: NSF Listed closed cell microcellular extruded KleanLock SealPro™ with vulcanized corners making a one-piece oil and solvent resistant gasket system.
Reflector: Die formed metal with high reflectance white polyester powder coat fin-ish. (minimum reflectivity 88%)
Lens: High durability .135" thick virgin acrylic with inverted P12 prismatic pattern. Sealed to Door with NSF listed RTV silicone. See "Options" for other choices.
Lamps: Select lamp options listed below. Lamps supplied by others.
Electrical: Standard ballast - Electronic less than 10% THD high performance instant start universal voltage (120-277 volt). See options for other choices.
Finish: Gloss white high reflectance 1000 hr. salt spray polyester powder coat finish standard for all housings. Stainless steel doorframes are satin polished unless op-tion WHT is chosen.
Flange Installation: Adjustable toggle arm mounting standard. Four .875” flat-tened and silicone sealed knockouts for wiring.
Grid Installation: Suitable for 1.0 and 1.5” T-bar grid systems. Four .875" flattened and silicone sealed knockouts for wiring.
Listings: UL and CUL Listed for Wet Location. Dust and water resistance rated IP-65. NSF -C2 listed for food zone. Suitable for use in FDA & USDA inspected facilities. Certified ISO-14644-1 classes 3 to 9 Fed. Std. 209E. Class 1. Bio Safety Levels 3 & 4. Rated at 1700 PSI Hosedown.
Options
FF = Fuse & HolderFD = Double Fuse & Holders2/EB = Two Ballasts, (Two Circuits) EBL = -20°F Electronic BallastEBPRS= Program Rapid Start BallastEBDIM= Electronic Dimming BallastHLO= High Light Output Ballast* 1/EM = 1 Lamp Battery Pack (700L)2/EM = 1 or 2 Lamp Battery Pack (1400L)*GG = N.S.F. Listed Gasketing TP = Stainless Steel Tamperproof FastenersWHT= White Finished Stainless Steel
2x2 = 2'x2’ Housing 2, 3, 4 or 6/T8 = F17T8 17W T8 (G13) 1 or 2/T8U6 = F32T8/U/6 (6” U-Lamp, G13)2 or 3/T8U1 = F31T8/U (1.625” U-Lamp, G13) 2, 3 or 4/BX = 40-Watt Biax (2G11)2, 3 or 4/T5 = F14WT5 14W T5 (G5) 2, 3, 4 or 6/T5HO = F24WT5 24W T5HO (G5) †
Ordering Information:
FP - /TR - - - - -
Series Installation Type Material Size Lamps Voltage
FP F/TR = Flanged 1 = CRS Hsg. & CRS Door 120V G/TR = Grid 2 = CRS Hsg. & SS Door 277V (For top and bottm relamp) 347V* UNV*
* Note: Not all options are compatible with every option. Ex: EBPRS is not Compatible with EBL. Consult factory for multiple options marked "*".
2x4 = 2'x4’ Housing 2, 3, 4 or 6/T8 = F32T8 32W T8 (G13) 2, 3 or 4/T5 = F28WT5 28W T5 (G5) 2, 3, 4 or 6/T5HO = F54WT5 54W T5HO (G5)
24.5" x 49.25"
Klean Lock Advanced Clean Space Series2x2 and 2x4 Top Relamp with T5, T5HO and T8 SourcesCertified for ISO-3, 209E Class 1 Cleanspaces
24.0"
5.75"
23.9"
Standard
NSFC-2 FOOD ZONE
ISO3
ISO 14644-1CLASS 3WET LOCATION
209E1
ISO6
ISO 14644-1CLASS 6
FED STD 209ECLASS 1
BSL3 & 4
Bio Safety LevelsBio-Safety
IP66
IEC 60529
Project: ________________________________
Fixture Type: ___________________________
Cat. Number: ___________________________
Approved By: ___________________________
Kurtzon Lighting / Innovtors in Lighting Since 1898 Morris Kurtzon, Incorporated1420 South Talman Avenue, Chicago, Illinois 60608773/277-2121 FAX 773/277-9164 © 2013Website - www.kurtzon.com
Latches: Four (4) stainless steel rotary cam latches secure housing to base creating a tight seal.
LEDs: Four (4) 6000 lumen arrays paired with thermal feedback controls provide assurance of long life and high performance while using only 231 watts.
Installation: Designed specifically for 4 inch IMP walkable ceilings common among refrigerated facilities. Designed to reduce labor and increase safety.
Heat Sink: Large extruded aluminum fins remove heat from fixture.
Driver(s): Programmable and dimmable (0-10V) provides the highest energy savings. Standard Factory 5 year warranty from Philips Advance.
Top Cover: Removable for servicing
Efficient: 99 lumens per watt and fully dimmable and programmable drivers. More than 23000 de-livered lumens. LM-79 certified tests.
High Performance : More than 23000 delivered lumens. LM-79 certified tests.
NSF listings for Food Zone standard.
Optional stainless steel available for highly cor-rosive environments.
No tools needed for servicing.
Continuously maintains seal pressure.
Smooth washable surfaces.
Great for BSL-3 and 4 spaces.
KL-x/EZ Series Screwless Doorframe Luminaires for Clean Spaces 1x4, 2x2 and 2x4 Luminaires for Flange/Drywall, Grid or Surface Installation Certified for ISO-3, 209E Class 1 Clean Spaces
No screws to loose or be left untightened.
FP-x/TR Series Top Relamp Luminaires for Walkable Ceilings 2x2 and 2x4 Luminaires for Flange/Drywall or Grid Installation Certified for ISO-3, 209E Class 1 Clean Spaces
Continuous piano hinged top cover easily released for servicing.
Fully NSF gasketed for a sure fixture seal. A handle and mechanical
stop built into top cover prevent fixture damage.
Fully seam welded housing provides rigidity even with large access window.
The same great door frame and listings as found on the regular FP series.
Lamps and ballasts may be changed from above or below .
FP-IMP Series LED High Bay for Insulated Metal Panel Ceilings 23000 Lumen Output Replaces HID systems while saving up to half the energy.
Daylight Series / Round Domes
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Hazardous Locations & Lighting
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Applications include:
Kurtzon LightingKurtzon Lighting 1 www.Kurtzon.com
Healthcare Facilities Brochure
www.Kurtzon.comKurtzon LightingKurtzon LightingQuality Since 1898
Vol. II
Kurtzon Lighting / Innovators In Lighting Since 1898
Indoor Sports Lighting
www.Kurtzon.comKurtzon LightingKurtzon LightingInnovators in
Lighting Since 1898
Med
ical
Dow
nlig
hts
Clea
nroo
m L
ight
ing
Chicago, IL 60608 1.800.837.8937www.kurtzon.com©1/2013
Receive your copy of any of these brochures from your local sales representative or call the number below.