KD line

Feeding Supplies

AS-Interface network 30 Vdc / 4 A

products line * supplies

KFT line New KFT supplies possess a new

and modern housing, developed formore practical and application inthe work stations. Available in the

following versions:

Output 24 Vdc / 20 A

Output 24 Vdc / 5 A

Output 24 Vdc / 10 A

The feeding supplies of KD line had beendeveloped to industrial installation, whose

operation is continuous and requirescomponent trustworthy.

Constructed with the most moderntechniques of keyed supplies, it possesses

high income, reduced dimensions,possibility of linking of supplies in parallel

and housing for DIN rail.

Mechanical Dimensions:

Redundant System:

KF-KD-2401R/FR90-264Vac

ü High performace against noises

ü Redundant for parallel connection

ü Protection against short and overload

Technical characteristics:

Feeding

Aplication 24Vdc / 0.8A

Feeding voltage 90 to 264Vac or 130 to 370 Vdc

Comsume current 0.3A@90Vac; 0.1A@264Vac

Consumed power 26 VA (max.)

Frequency 47 to 63 Hz

Signalling led bicollor

Green led output activate

Red ledlight on: overload

blinking: short-circuit

Input Circuit

Internal protection Internal fuse 2A

Changing frequency 100 Khz

Supply efficiency > 75 % @ 0.8A / 264 Vac

Output Circuit

Output voltage 24Vdc

Output precision < 1%

Ripple and noises < 100 mVpp @ 0.8 A

Max. output current 0.9 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material polycarbonate

Connection bornes plug-in

Fixation rail DIN 35 mm

Protection class IP 20

Weight 75g

Operation temperature -20°C to +60°C

Connections diagram:

24Vdc / 0.8A

VacSupply 1

Supply 2

VdcF 1

F 2

Load Alternate Current Alternate Current

90 - 264Vac90 - 264Vac

InputInput

66

44

OutputOutput

Direct Current Direct Current 24 Vdc24 Vdc

55

FF

NN22(+)22(+)

24(-)24(-)

23(-)23(-)

1(-)1(-) 2(+)2(+)Power RailPower Rail

16(+)16(+)

18(-)18(-)

17(-)17(-)

FEEDING SUPPLYFEEDING SUPPLY

LEDLED

KD-2401/FR90-264Vac

ü Low cost

ü Stabilized output in 24Vdc / 1A

ü Protection aganist short and overload

Technical Characteristics:

Feeding

Aplication 24Vdc / 1A

Feeding supply 90 to 264Vac or 130 to 370 Vdc

Consume current 0.3A@90Vac; 0.1A@264Vac

Consumed power 26 VA (max.)

Frequency 47 to 63 Hz

Signalling green led

Green ledlight on: output activate

blinking: overloadlight off: short-circuit

Input Circuit

Internal protection Internal fuse 2A

Changing frequency 100 Khz

Supply efficient > 75 % @ 1A / 264 Vac

Output Circuit

Output voltage 24Vdc

Output precision < 1%

Ripple and noises < 100 mVpp @ 1 A

Max. output current 1.2 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material polycarbonate

Connection bornes plug-in

Fixation rail DIN 35 mm

Protection class IP 20

Weight 75g

Operation temperature -20°C to +60°C

Connections diagram:

Mechanical Dimensions:

Redundant System:

Redundant System is not avaible in thisversion.

Alternate Current Alternate Current

90 - 264Vac90 - 264Vac

InputInput

66

44

OutputOutputDirect Current Direct Current

24 Vdc24 Vdc55

FF

NN

22(+)22(+)

24(-)24(-)

23(-)23(-)

1(-)1(-) 2(+)2(+)Power RailPower Rail

FEEDING SUPPLYFEEDING SUPPLY

LEDLED

24Vdc / 1A

KFT-2405R/AT110-220Vac

ü Redundant to connection in parallel

ü Protection against short and overload

ü Fault indication via led bicollor

Technical characteristics:

Feeding

Aplication 24Vdc / 5A

Feeding voltage 110/ 220Vac(automatic selection)

Consume current 1.3A@88Vac; 0.7A@264Vac

Consumed power 150 VA (max.)

Frequency 47 to 63 Hz

Signalling led bicollor

Green led output activate

Red ledlight on: overload

blinking: short-circuit

Input Circuit

Internal protection Internal fuse 4A

Changing frequency 100 Khz

Supply efficiency > 90 % @ 5A / 264 Vac

Output Circuit

Output voltage 24Vdc

Output precision < 1%

Ripple and noises < 60 mVpp @ 5 A

Max. output current 5.5 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material aluminium and galvanized steel

Connection screwed terminals 2.5mm2

Fixation rail DIN 35 mm

Protection class IP 20

Weight 650g

Operation temperature -20°C to +60°C

Mechanical Dimensions:

Redundant System:

65106

128

24Vdc / 5A

VacSupply 1

Supply 2

VdcF 1

F 2

Load

KFT-3004R/AT110-220Vac

ü Indicate to AS-Interface network

ü Protection against short and overload

ü Fault indication via led bicollor

Technical characteristics:

Feeding

Aplication 30.5Vdc / 4A

Feeding voltage 110/ 220Vac(automatic selection)

Consume current 1.3A@88Vac; 0.7A@264Vac

Consumed power 150 VA (max.)

Frequency 47 to 63 Hz

Signalling led bicollor

Green led output activate

Red ledlight on: overload

blinking: short-circuit

Input Circuit

Internal protection Internal fuse 4A

Changing frequency 100 Khz

Supply efficiency > 90 % @ 4A / 264 Vac

Output Circuit

Output voltage 30.5Vdc

Output precision < 1%

Ripple and noises < 60 mVpp @ 4 A

Max. output current 4.5 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material aluminium and galvanized steel

Connection screwed terminals 2.5mm2

Fixation rail DIN 35 mm

Protection class IP 20

Weight 650g

Operation temperature -20°C to +60°C

30Vdc / 4A

The KFT-3004R supply must be used together with the

expander module of ASI-KD-EF supply that has the

inductors necessary to make the network modulation.

ASI-KD-EF

n

oitacil

pp

a IS

A

PLC KFT-3004R

ASI-KD-EF

KFT-3004R-AT110/220Vac

Control Panel Field

KFT-2410R/AT110-220Vac

ü Redundant to connection in parallel

ü Protection against short and overload

ü Fine adjust of the output voltage

Technical characteristics:

Feeding

Aplication 24Vdc / 10A

Feeding voltage 110/ 220Vac(automatic selection)

Consume current 2.6A@88Vac; 1.4A@264Vac

Consumed power 300 VA (max.)

Frequency 50 to 60 Hz

Signalling led bicollor

Green led output activate

Red ledlight on: overload

blinking: short-circuit

Input Circuit

Internal protection Internal fuse 4A

Changing frequency 100 Khz

Supply efficiency > 92 % @ 10A / 264 Vac

Output Circuit

Output voltage 24Vdc (adjustable from 22 to 28Vdc)

Output precision < 1%

Ripple and noises < 100 mVpp @ 10 A

Max. output current 11 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material aluminium and galvanized steel

Connection screwed terminals 2.5mm2

Fixation rail DIN 35 mm

Protection class IP 20

Weight 1200g

Operation temperature -20°C to +60°C

Mechanical Dimensions:

Redundant System:

128

65

65

106

FEEDING SUPPLYFEEDING SUPPLY

LEDLED

FF

NN

ALTERNATE CURRENTALTERNATE CURRENT

110 or 220Vac110 or 220Vac

INPUTINPUT

DIRECT CURRENTDIRECT CURRENT

OUTPUTOUTPUT

--

++

24Vdc24Vdc

VacSupply 1

Supply 2

VdcF 1

F 2

Load

24Vdc / 10A

The KFT-2410R supply was specially developed toapplications in industrials networks as DeviceNet andProfibus DP.

KFT-2420R/220Vac

ü Redundant to connection in parallel

ü Protection against short and overload

ü Fine adjust of the output voltage

Technical characteristics:

Feeding

Aplication 24Vdc / 20A

Feeding voltage 220Vac

Consume current 3A@242Vac

Consumed power 600 VA (max.)

Frequency 50 to 60 Hz

Signalling led bicollor

Green led output activate

Red ledlight on: overload

blinking: short-circuit

Input Circuit

Internal protection Internal fuse 4A

Changing frequency 100 Khz

Supply efficiency > 90 % @ 20A / 242 Vca

Output Circuit

Output voltage 24Vdc (adjustable from 22 to 28Vdc)

Output precision < 1%

Ripple and noises < 100 mVpp @ 10 A

Max. output current 22 A (use continuous @ 50°C)

Output protection overload and short-circuit

Housing

Material aluminium and galvanized steel

Connection screwed terminals 2.5mm2

Fixation rail DIN 35 mm

Protection class IP 20

Weight 1900g

Operation temperature -20°C to +60°C

Mechanical Dimensions:

Redundant System:

FEEDING SUPPLYFEEDING SUPPLY

LEDLED

FF

NN

ALTERNATE CURRENTALTERNATE CURRENT

220Vac 220Vac

INPUTINPUT

DIRECT CURRENTDIRECT CURRENT

OUTPUTOUTPUT

--

++

24Vdc24Vdc

215

128

106

VacSupply 1

Supply 2

VdcF 1

F 2

Load

24Vdc / 20A

Addresses:

HEADOFFICE - SÃO PAULORua Tuiuti, 1237 - Tatuapé

São Paulo - SP - Cep: 03081-000Phone: 55 11 2145-0444

Fax: 55 11 2145-0404vendas@sense.com.br

FACTORY - MINAS GERAIS Av. Joaquim Moreira Carneiro. 600 - SantanaSanta Rita do Sapucaí - MG - Cep: 37540-000

Phone: 55 35 3471-2555Fax: 55 35 3471-2033

BRANCH OFFICE - CampinasAv. Barão de Itapura, 1100 - 2º andar - sala: 22

Botafogo - Campinas-SP - Cep: 13020-432Phone / Fax: 55 19 3239-1999

campinas@sense.com.br

BRANCH OFFICE - Porto AlegreRua Itapeva, 80 - conj. 302 - Passo da Areia

Porto Alegre-RS - Cep: 91350-080Phone: 55 51 3345-1058

Fax: 55 51 3341-6699palegre@sense.com.br

BRANCH OFFICE - Rio de JaneiroRua Almirante Tamandaré, 66 sala: 408 - Flamengo

Rio de Janeiro - RJ - Cep: 22210-060Phone: 55 21 2557-2526

www.sense.com.br

ABS - Sistemas de Automação Ltda.

Poços de Caldas - MG

Phone: 55 35 3722-1667 - Fax: 55 35 3722-2624

absautomacaomg@matrix.com.br

AVATEC Representações Ltda.

Vitória - ES

Phone: 55 27 3327-1599 - Fax: 55 27 3327-1275

avatec.representacao@uol.com.br

COMTÉCNICA Automação Industrial Ltda.

Fortaleza - CE

Phone / Fax: 55 85 3272-6962

comtecnica@comtecnica.com.br

ELCONI Com. Rep. de Material Elétrico e Teleinform. Ltda.

Curitiba - PR

Phone: 55 41 3352-3022 - Fax: 55 41 3352-2945

vendas@elconi.com.br

ELETRO NACIONAL Comércio Representações Ltda.

Joinville - SC

Phone / Fax : 55 47 3435-4466

vendas@eletronacional.com.br

KIKUCHI Representação Ltda.

Piatã - BA

Phone: 55 71 3367-1181 - Fax: 55 71 3367-6555

kikuchivendas@uol.com.br

LOBRIM Comércio e Representação Ltda.

Recife - PE

Phone / Fax: 55 81 3424-6500

lobrim@rimafel.com.br

NAM Comércio Representações Técnicas Ltda.

São Luiz - MA

Phone: 55 98 3227-0455 - Fax: 55 98 3227-0676

nam.miotto@elo.com.br

PACNET Com. Eletro Eletrônicos Ltda.

Goiânia - GO

Phone: 55 62 3207-8926 - Fax: 55 62 3207-7525

vendas@pacnetprodutos.com.br

2000000062 Rev.B - 02/2014 - We rerserve the rights of modify the information showed here without prior warning.

National Sellers