FOLDING GLASS WALL SYSTEMS - -WINDOW TECH-€¦ · Series SI3000 Aluminum Folding Glass Wall...
7
A seamless wall with uninhibited views. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations ® since their introduction to the industry. Folding Glass Walls are also known as Bi-Fold Doors or Accordion-Style Doors and can accommodate any number of panels and configurations. Folding Glass Walls offer a flexible and customizable opening and can be incorporated into residential and commercial projects including covered patios, enclosed porches, restaurants, storefronts, retirement homes, stadiums, hotels, pool houses, and golf resorts, just to name a few applications. FOLDING GLASS WALL SYSTEMS SERIES SI3000 PANELS • Top or bottom load, in-fold or out-fold operation • Standard finishes: • AAMA 2603: Bronze, White • AAMA 611 Class I Anodized: Clear, Dark Bronze • Endless configurations possible • LEED friendly system including recycled content • Designed and manufactured in the U.S.A. HARDWARE • Custom manufactured operable hardware • Panic hardware and closer options available • Roller assemblies designed to minimize and simplify panel maintenance • Zero-maintenance extruded aluminum hinges with stainless steel pins • Multiple hardware styles and finishes • Designer finishes • AAMA 2603: Hartford Green, Black, Natural Clay, Sandstone • Custom finishes • Powder coat finish: AAMA 2604 - 2605 • Fluoropolymer (50% or 70%): AAMA 2604 - 2605 • Wood veneer, metal cladding, and foiling options • Dual color or dual finish options • Matching fixed transoms & sidelites • Integrated options • Swing doors: single or double • Dutch doors: single or double • Pet doors • Screen options: folding, sliding, retractable • Multiple sill designs, including ADA compliant ramps • Factory installed sill drain tubes, if required • Mullions, decorative muntins, simulated divided lites (SDLs), interior & exterior grids • Designed to accommodate almost any glazing infill • Custom tinted and decorative glazing available FEATURES OPTIONS © Copyright 2017 Solar Innovations ® . All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 | 800 618 0669 or 570 915 1500 | REV 01300317 RS
Transcript of FOLDING GLASS WALL SYSTEMS - -WINDOW TECH-€¦ · Series SI3000 Aluminum Folding Glass Wall...
A seamless wall with uninhibited views. Series SI3000 Aluminum Folding Glass Wall Systems have been a signature product of Solar Innovations® since their introduction to the industry. Folding Glass Walls are also known as Bi-Fold Doors or Accordion-Style Doors and can accommodate any number of panels and configurations. Folding Glass Walls offer a flexible and customizable opening and can be incorporated into residential and commercial projects including covered patios, enclosed porches, restaurants, storefronts, retirement homes, stadiums, hotels, pool houses, and golf resorts, just to name a few applications.
FOLDING GLASS WALL SYSTEMSSERIES SI3000
PANELS• Top or bottom load, in-fold or out-fold operation• Standard finishes:
• AAMA 2603: Bronze, White• AAMA 611 Class I Anodized: Clear, Dark Bronze
• Endless configurations possible• LEED friendly system including recycled content• Designed and manufactured in the U.S.A.
HARDWARE• Custom manufactured operable hardware• Panic hardware and closer options available• Roller assemblies designed to minimize and
simplify panel maintenance• Zero-maintenance extruded aluminum hinges
with stainless steel pins• Multiple hardware styles and finishes
• Designer finishes• AAMA 2603: Hartford Green, Black, Natural
Clay, Sandstone• Custom finishes
• Powder coat finish: AAMA 2604 - 2605• Fluoropolymer (50% or 70%): AAMA 2604 - 2605• Wood veneer, metal cladding, and foiling options• Dual color or dual finish options
• Matching fixed transoms & sidelites• Integrated options
• Swing doors: single or double• Dutch doors: single or double• Pet doors
• Screen options: folding, sliding, retractable• Multiple sill designs, including ADA compliant ramps• Factory installed sill drain tubes, if required• Mullions, decorative muntins, simulated divided lites
(SDLs), interior & exterior grids• Designed to accommodate almost any glazing infill• Custom tinted and decorative glazing available
FEATURES OPTIONS
© Copyright 2017 Solar Innovations®. All Rights Reserved. 31 Roberts Road, Pine Grove, Pennsylvania 17963 | 800 618 0669 or 570 915 1500 | REV 01300317 RS
White
HARDWARE
Two Point Locking Handle
Adjustable Door Catch
Door Closer Door Limiter
FOLDING GLASS WALL SYSTEMS
A: Handles
C: Hinges D: Locks ClosuresB: Pull Hardware
AB(on reverse)
B
C
D
Coastal Applications
Toronto
Heavy Corrosion Resistant Finish Options
White
BlackMatte Black
Satin Nickel Satin Chrome
Additional handle styles, colors, and back plate options available upon request. Non-standard handle options may increase lead times and/or cost. All handles available with thumb turn interior lock with lever exterior, lever interior and exterior, and thumb turn interior lock with keyed exterior options.
Allegro
Not available on G3 units
Wire Pull Hinge
(Out-Fold)
Recessed Pull
(In-Fold)
Pull Hardware, Hinge, & Lock Finishes: Clear Anodized, Dark Bronze Anodized, White Painted, and Bronze Painted. Two Point Locking Handle guard available in black or white.
Please Note: All hardware is subject to vendor availability. Custom finishes may be available upon request at additional lead time and/or cost. Solar Innovations® reserves the right to discontinue any hardware option at any time. Please be sure to visit our website for additional product information: www.solarinnovations.com
Door Closer Finishes: Aluminum Painted, Bronze, Black
Adjustable Door Catch & Door Limiter Finishes: Clear Anodized, Dark Bronze Anodized, White Painted, and Bronze Painted.
Finish Options
Inland Applications
Semi-Concealed Hinge
SI Sandstone
Commercial Panic Hardware Options Passive Hardware Sets
Exterior Entry TrimMORTISESQUARE
Exterior keyed lock and/or interior thumb turn lock available
Rim PanicWire Pulls SQUARE
CommercialTORONTO
PULL PUSH
Please Note: Depending upon color selection, additional charges and increased lead times may apply. Color illustrations are shown as accurate as standard photography and printing processes allow. Final finish selection should be made from a physical sample; please contact Solar Innovations® to receive samples. All product and finish options are subject to vendor availability. Solar
Innovations® reserves the right to discontinue any option at any time without notice. Additional options, including custom color match, are available; contact Solar Innovations® for details.
FINISH OPTIONS
CONFIGURATIONS
Dark Walnut 1802
DS 733 TexturedDS 403 Smooth
Knotty Pine 2103DS 716 TexturedDS 402 Smooth
SI Black SI Natural Clay
SI BronzeSI White
Acacia 1001DS 716 TexturedDS 402 Smooth
SI Hartford Green
Acacia 1001DS 733 TexturedDS 403 Smooth
Class I Clear Anodized Dark Bronze Anodized
Copper Lead Coated Copper
304 Stainless Steel #4 Satin Cladding
304 Stainless Steel #8 Mirror Cladding
Douglas Fir 1501DS 716 Textured DS 402 Smooth
Cherry 1402DS 716 TexturedDS 402 Smooth
Oak Assi 2501DS 733 TexturedDS 403 Smooth
Cherry 1402DS 733 TexturedDS 403 Smooth
National Walnut 1806DS 706 TexturedMahogany Finish
Teak 2601DS 706 TexturedMahogany Finish
White Oak(Unfinished)
Southern Yellow Pine
(Unfinished)
Northern White Pine
(Unfinished)
Birch(Unfinished)
Mahogany
Stock Finishes
Faux Wood Finishes
Wood Veneering
Metal CladdingDesigner Finishes
Red Oak(Unfinished)
Spanish Cedar(Unfinished)
Western Red Cedar
(Unfinished)
Douglas Fir(Unfinished)
White Maple(Unfinished)
W P = W a l l P a n e l S D = S i n g l e D o o r D D = D o u b l e D o o r D A = D o o r A d a p t e r F J = F l o a t i n g J a m b
W P
W P
A L L W A L L
W P
W PW P
S P L I T W A L L
W PW P
W P W P
W P
W P
W P W P W P W P
W P W PF J
D O U B L E D O O R
W PW P
W P W PD D
D D
W PW P
S I N G L E D O O R
W PW P
W P W P S D
S D
D A
W P W P S D
1 3 5 ˚ N O P O S T 9 0 ˚ N O P O S T S E G M E N T E D R A D I U S
W P W P
W P
W P W P
S D
W P W PD D
W P
S D
W P
W P
W P
W P
W P W P
S D
S D
D D
W P
W PD D
S D
D D
Custom configurations available upon request.
Concealed vertical rod available on commercial panic hardware.
• Designed to accommodate almost any monolithic, insulated, laminated, decorative, polycarbonate, or solid panel infill from 3/16” to 1 1/4”
G2 Thermally Enhanced Aluminum Folding Glass Wall Systems are a great way to open your environment. The system offers exceptional air, water, structural, and thermal performance in any condition. The frame uses a thermal strut system that separates the interior metal from the exterior metal. By including this thermal break, the temperature transfer between the outdoors and indoors is limited.
Frames are available in three vertical stile widths: narrow, standard, and heavy. You can select a consistent vertical width or mix and match the three stile widths to create a truly unique product. This flexibility allows multiple sightline and bottom rail configurations that can be retrofitted to match an existing opening or accommodate specific structural requirements.
G2 Thermal SystemG2 Non-Thermal Aluminum Folding Glass Wall Systems are ideal for mild climates and indoor uses. This system is popular for conference rooms, interior commercial entryways, classrooms, and residential & commercial room dividers. Frames are available in two vertical stile widths: narrow and standard. These can be combined over multiple units for a unique style or kept consistent throughout.
G2 Non-Thermal System
G2 FOLDING GLASS WALLS
• Water performance up to 15psf, depending on sill choice and configuration
• Structurally tested up to a design pressure of 80psf
• Test results available upon request
• Minimum panel size: 18" wide; smaller panels may be available upon engineering approval
• Panel size up to 3' x 10'; larger panel options may be available depending on application
Panels Glazing Performance
REGULAR JAMB - REGULAR FRAME NARROW JAMB - REGULAR FRAME NARROW JAMB - NARROW FRAMERegular G2 Jamb & Frame
6 3/8" 7" 6 3/8"
2 1/4"
StandardAir: >0.01 cfm/ft2 Water: 15.0 psf
Recessed StandardAir: >0.01 cfm/ft2
Water: 15.0 psf
Recessed FlushAir: >0.09 cfm/ft2
Water: 9.0 psf
Recessed with ADA RampsAir: >0.09 cfm/ft2
Water: 9.0 psf
3 1/4" 3 1/4"
2 7/8"
1 7/8"
2 5/
8"
2 5/
8"
2 7/8"
3 3/8"
2 1/8"
2 1/8"
2 7/32"
1/2"
2 3/4"2 3/4"
ADA Surface MountSurface Mount
Recessed Flush Hat Thermal ADA Surface Mount
REGULAR JAMB - REGULAR FRAME NARROW JAMB - REGULAR FRAME NARROW JAMB - NARROW FRAMEREGULAR JAMB - REGULAR FRAME NARROW JAMB - REGULAR FRAME NARROW JAMB - NARROW FRAME
Narrow G2 Jamb & Regular G2 Frame Narrow G2 Jamb & Frame
4 1/2"5 7/16"
Top and bottom horizontals unable to utilize Narrow framing. Options dependent upon desired size and engineering requirements.
7" 5 1/8" 4 1/2"5 7/16"
2 1/4"2 1/4"
Top & Bottom Load Sill Options
Top Load Only Sill Options
Vertical & Horizontal Rail Options Mullion Options
Head Detail
2 7/8"
5 5/8"
Narrow Mullion
2 5/8"
2 1/4"
Standard Mullion
3 1/2"
2 1/4"
Wide Mullion
6"
2 1/4"
Narrow Thermal
2 7/16"
2 1/4"
StandardThermal
3 3/8"
2 1/4"
Heavy Thermal
6 1/8"
2 1/4"
3 3/8"
2 1/4"
StandardNon-Thermal
2 1/4"
2 1/4"
2 7/16"
4 3/8"
Narrow Non-Thermal
StretchRail
(True Divided Lites)
Please note: All mullions offered by Solar Innovations® include thermal break, regardless of the system
2 1/4"
13/16"
7/8"
3/4" 3/4"
14 5/16"
2 1/4"
21"
1"
Jamb Details
G3 Non-Thermal Aluminum Folding Glass Wall Systems are ideal for any application when thermal performance is not required, including mild climates and indoor uses. This system is popular for conference rooms, interior commercial entryways, classrooms, and residential and commercial room dividers.
G3 Marine Glazed Folding Glass Wall System, also known as our Xtra Narrow System, uses a patented design to combine vertical marine glazing with horizontal stop glazing in order to create a much narrower vertical frame than conventional stop glazed doors. The Marine Glazed System has achieved the narrowest two-sided glazed door on the market. Performance testing is in progress for this system.
G3 Non-Thermal System
G3 Marine Glazed System
G3 Thermally Enhanced Aluminum Folding Glass Wall Systems are designed for commercial and residential applications where higher design pressures are required. For easy operation, this system has been designed to self support at larger sizes. The G3 Thermal System offers exceptional air, water, structural, and thermal performance in any condition. The frame uses a thermal strut system that separates the interior metal from the exterior metal. By including this thermal break, the temperature transfer between the outdoors and indoors is limited.
Frames are available in three vertical stile widths: Standard, Narrow, and Xtra Narrow. You can select a consistent vertical width or mix and match the three stile widths to create a truly unique product. This system was created with similar sightlines to the G2 Systems so that the two could be used together, if desired. The flexibility of both systems allows multiple sightline and bottom rail configurations that can be retrofitted to match an existing opening or accommodate specific structural requirements.
G3 Thermal System
G3 FOLDING GLASS WALLS
• Water performance up to 15psf, depending on sill choice and configuration
• Test results available upon request
• Minimum panel width: 24"; smaller panels may be available based upon engineering
• Panel size up to 3' x 14'; larger panel options may be available depending on application
• Designed to accommodate almost any monolithic, insulated, laminated, decorative, polycarbonate, or solid panel infill from 1/4” to 1 1/2”
Panels Glazing Performance
Performance does not apply to G3 Marine Glazed System.
SOLARORIGINAL
1 5/8"
Stretch Rail
Marine GlazedHorizontals
Head Detail
10" Bottom Rail
Marine GlazedVerticals
StretchRail
5 3/8"
3"
Stretch Rail
Marine GlazedHorizontals
Head Detail
10" Bottom Rail
Marine GlazedVerticals
Stretch Rail
Marine GlazedHorizontals
Head Detail
10" Bottom Rail
Marine GlazedVerticals
Stretch Rail
Marine GlazedHorizontals
Head Detail
10" Bottom Rail
Marine GlazedVerticals
Stretch Rail
Marine GlazedHorizontals
Head Detail
10" Bottom Rail
Marine GlazedVerticals
G3 Standard Sill
Water:Air:
Water:Air:
Water: 12.0psfAir:
Water: 12.0psfAir:
G3 RecessedFlush Dual Wheel
FGW Sill
G3 Recessed DualWheel FGW Sill With
Ramps
G3 RecessedStandard Dual
Wheel FGW Sill
StandardAir: 0.18 cfm/ft2 Water: 12.0 psf
Recessed with ADA RampsAir: 0.09 cfm/ft2
Water: 9.0 psf
Recessed Standard Air: 0.18 cfm/ft2
Water: 12.0 psf
Recessed Flush Air: 0.09 cfm/ft2
Water: 9.0 psf
ADA Surface MountSurface Mount
Recessed Flush Hat
2 1/4"
13/16"
7/8"
3/4" 3/4"
14 5/16"
2 1/4"
3 29/32" 4" 4"
1 7/
8"
1 7/
8"
2 5/
8"
2 7/
32"
1 7/
8" 2 5/
8"
1/2"
3 13/32" 3 1/2" 3 1/2"
3 1/2"
21"
1"Thermal ADA Surface Mount
Standard Thermal
HeadDetail
G3 Terrace Door Mullion
G3 Mullion 275
Standard Non-Thermal
Narrow Thermal
Xtra NarrowThermal
Xtra NarrowThermal
10" Bottom Rail
Xtra NarrowMullion
Narrow G3 Jamb & Frame Xtra Narrow G3 Jamb & FrameNarrow G3 Jamb & Regular G3 FrameRegular G3 Jamb & Frame
Top & Bottom Load Sill Options
Top Load Only Sill Options
Vertical & Horizontal Rail Options
Jamb Details
Gen 3 Regular Frame G3 Mullion 275G3 LT FGW FrameG3 Regular
Non-Thermal Rail G3 LT Non-ThermalFrame
Gen 3 LT1-13/16" Frame
Gen 3 TerraceDoor Mullion
G3 Heavy 1-13/16"Frame
3 1/2"
5 5/8" 3 1/2"
2 9/16"
2 1/8"
10"
3 1/8"
3"
3 1/2"
3"3"
3" 3"
3"
3" 3"3"
3 5/16"
4 1/4"
Gen 3 Regular Frame G3 Mullion 275G3 LT FGW FrameG3 Regular
Non-Thermal Rail G3 LT Non-ThermalFrame
Gen 3 LT1-13/16" Frame
Gen 3 TerraceDoor Mullion
G3 Heavy 1-13/16"Frame
Gen 3 Regular FrameG3 Mullion 275 G3 LT FGW FrameG3 Regular
Non-Thermal RailG3 LT Non-ThermalFrame
Gen 3 LT1-13/16" Frame
Gen 3 TerraceDoor Mullion
G3 Heavy 1-13/16"Frame
Gen 3 Regular FrameG3 Mullion 275 G3 LT FGW FrameG3 Regular
Non-Thermal RailG3 LT Non-ThermalFrame
Gen 3 LT1-13/16" Frame
Gen 3 TerraceDoor Mullion
G3 Heavy 1-13/16"Frame
Gen 3 Regular FrameG3 Mullion 275 G3 LT FGW FrameG3 Regular
Non-Thermal RailG3 LT Non-ThermalFrame
Gen 3 LT1-13/16" Frame
Gen 3 TerraceDoor Mullion
G3 Heavy 1-13/16"Frame
NARROW JAMB - XTRA NARROW VERTICAL -NARROW HORIZONTAL FRAME
6 3/8" 5 7/16" 4 1/2" 311/16"7" 7" 5 1/8" 3 1/2"7 5/8" 6 11/16" 5 3/4" 5 3/4"
3" 3" 3" 3"
Mullion Options(True Divided Lites)
Please note: All mullions offered by Solar Innovations® include thermal break, regardless of the system
(Horizontal) (Vertical)
Top and bottom horizontals unable to utilize Narrow or Xtra Narrow framing. Options dependent upon desired size and engineering requirements.
