5.0/0518/HF

FOLDING DOLL CRADLE -PINK ROSEBUD

MODEL NUMBER*:00362

Assembly and Use Instructions. Adult assembly Required.Read all instructions before use.

This manual is part of the product and must be saved for future reference.

VERSION CODE*:5.0/0518/HF

* Model and Version numbers are needed if replacement parts are requested

Badger Basket Company, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.comU.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310

Phone: 715-352-2311 • Fax: 715-352-3163

FOR REPLACEMENT PARTS:http://www.badgerbasket.com/parts

5.0/0518/HF

BEFORE YOU BEGIN ASSEMBLY:Check all parts. If anything is missing or not satisfactory, please DO NOT call the store

or return the product to them. Please go online to: http://www.badgerbasket.com/parts

Most problems are resolved without you needing to leave home. When contacting us, please have this

instruction manual, your product model number, and your Version Code ready.

Your Model Number is: 00362Your Version Code is: 5.0/0518/HF

WARNING - CAUTION

WARNINGADULT ASSEMBLY REQUIREDDUE TO THE PRESENCE OF SMALL PARTS AND SHARP POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF CHILDREN UNTIL ASSEMBLY IS COMPLETE.

READ ALL INSTRUCTIONS before use of this product. Use only the parts and hardware provided by Badger Basket. Keep instructions for future use. Do not use the product if it is damaged or broken. Periodically inspect the product to ensure all parts

remain tight. This item is a toy for dolls only. It is never to be used for real infants or pets. No product is a substitute for adult supervision. Always supervise your child during play. For children ages three (3) years and older. Never sit on or stand on the toy.

CARE INSTRUCTIONS: Frame can be wiped clean with a damp cloth and mild soap and dry thoroughly.

Spot clean or hand wash fabric as needed with cold water and mild detergent and allow to air dry.

5.0/0518/HF

TOOLS NEEDED:

Phillips Screwdriver(not included)

PARTS INCLUDED:

(A) 1 x CRADLE BODY(B) 1 x LONG METAL ROD(C) 2 x METAL ROCKERS

(D) 4 x BOLTS(E) 1 x PADDED MAT

PARTS AND HARDWARE

Ax1

Ex1

Cx2

Bx1

Dx4

5.0/0518/HF

STEP 1: See PICTURE 1. Assemble the cradle base as shown using the CRADLE BODY (PART A), LONG METAL ROD (PART B), TWO METAL ROCKERS (PART C), and FOUR BOLTS (PART D).

STEP 2: See PICTURES 2A and 2B.Turn the cradle right side up. Unfold the metal frame support bars inside the CRADLE BODY (PART A) and apply pressure to snap them under the plastic clips that are attached to the bottom board.

STEP 3: See PICTURE 3. Place the PADDED MAT (PART E) inside the cradle body. Next, secure the hood in the open position by pressing on the hinge bars to lock into place. The cradle is ready for play!

A

B

C

PICTURE 1

CD D

DD

PICTURE 2A

PICTURE 2B

E

Hinge Bar

PICTURE 3

When play time is over, the hood hinge bars can be released to collapse the hood; and the metal

support bars inside the cradle can be released to collapse the cradle body for storage or travel.