FOBA C.0101/C
2
Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 1300 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0101 and C.0301 offer cost effective solutions to your part marking challenges. The C.0101 10-Watt offers all of the performance features found in the C.0301 30-Watt marking laser, but with a power source better matched for moderate line speed applications or those at rest. The 30-Watt C.0301 is perfect for higher speed mark-on-the-fly applications or more demanding materials such as many plastics. Ignition distributor: marking of silicone rubber; Sectioned PCB plate: material removal; Passports: drilling of dot font FOBA C.0101/C.0301 Reliable, field-proven CO 2 laser marking technology combined with unrivalled flexibility Your product benefits → Reliability: Air-cooled laser (source life expectancy up to 45,000 hours) virtually eliminates maintenance intervals; High resolution marking head for high quality, permanent and consistently crisp codes that assure product traceability and tamper-proofing. → Built-in productivity: A variety of mark window options and high-speed marking heads allow you to meet your throughput goals. → Simple usability: Most flexible integration solution with 32 standard beam delivery options; Quick set up and easy redeployment via detachable umbili- cal cable and simple-to-use accessory connections; 4 interface options plus a choice of networking communications to match your preferred workflow.
Transcript of FOBA C.0101/C
Wavelengths, scan head aperture, marking head position, IP rating, power and much more can be configured to suit your application needs. Flexibility is built-in. With print speeds up to 1300 characters/sec. and line speeds up to 900 m/min., these marking lasers address both simple and complex code requirements on a range of substrates including paperboard, glass, painted metals and many plastic materials. This flexibility makes the C-Series lasers well suited for laser marking applications in various industries: for automotive parts, electronic components, plastic parts, cables, and many more. Marking your products on-the-fly or when stationary, with simple date codes or complex graphics, the C.0101 and C.0301 offer cost effective solutions to your part marking challenges.
The C.0101 10-Watt offers all of the performance features found in the C.0301 30-Watt marking laser, but with a power source better matched for moderate line speed applications or those at rest. The 30-Watt C.0301 is perfect for higher speed mark-on-the-fly applications or more demanding materials such as many plastics.
Ignition distributor: marking of silicone rubber; Sectioned PCB plate: material removal; Passports: drilling of dot font
FOBA C.0101/C.0301
Reliable, field-proven CO2 laser marking technology combined with unrivalled flexibility
Your product benefits→ Reliability: Air-cooled laser (source life expectancy up to 45,000 hours)
virtually eliminates maintenance intervals; High resolution marking head for high quality, permanent and consistently crisp codes that assure product traceability and tamper-proofing.
→ Built-in productivity: A variety of mark window options and high-speed marking heads allow you to meet your throughput goals.
→ Simple usability: Most flexible integration solution with 32 standard beam delivery options; Quick set up and easy redeployment via detachable umbili-cal cable and simple-to-use accessory connections; 4 interface options plus a choice of networking communications to match your preferred workflow.
LASE
R K
LASS
E 4
LASE
R C
LASS
4G
em./A
ccor
ding
toD
IN E
N 6
0825
-1:2
008-
05
ALLTEC GmbH An der Trave 27-31 23923 Selmsdorf | GermanyT + 49 38823 55-0 F + 49 38823 55-222 [email protected] | www.fobalaser.com
© 2014 ALLTEC GmbH – All rights reserved. Specification subject to change without notice. C.0101-C.0301_EN_10.14
Your local agency:
FOBA C.0101/ C.0301Technical Data
C.01
01 m
arki
ng u
nit (
IP54
) w
ith 6
mm
mar
king
hea
dIP
54 S
uppl
y un
it
Marking featuresMarking heads → 6 mm head with 5 focus lenses (f =64/95/127/190/245 mm)and focusing → 10 and 12 mm heads (optional) with 8 focus lenses
(f =63.5/85/100/150/200/300/351/400 mm) Marking fields Depends on marking head and focus lens(mm2) → 6 mm head: from (a x b) 32.2 x 41.9 to 127.8 x 166.5 → 10 mm head (opt.): from 21.8 x 27 to 227.8 x 326.9 → 12 mm head (opt.): from 20.6 x 25.6 to 216 x 311.9 Laser Type Sealed CO2 laser, power class 10/30-Watt
Wavelengths 9.3 µm, 10.2 μm and 10.6 μmLaser class 4 (according to DIN EN 60825-1)
849 mm130
29.4
719 mm
136
110
C.03
01 m
arki
ng u
nit (
IP54
) w
ith 6
mm
mar
king
hea
d
75.5
778 mm130.5 647.5 mm
144.
518
5
380 mm343 mm
311 mm305 mm
146
Mar
king
fiel
d pr
inci
ple
a
b
User interfacesHandheld controllerPC software FOBA Draw Smart Graph Com Active X interfaceInterfaces Ethernet (TCP/IP), RS232 optional; Inputs
for encoders and product detector triggers; 3 inputs/ 7 outputs for start/stop signals, machine/operator interlocks, alarm out-puts; additional I/Os available
IntegrationMachine safety Optional safety module for Performance Level d (PL d) in accordance with EN 13849-1 Line integration Direct integration via scripting interfaceBeam delivery 32 standard beam delivery options (beam extension unit/ turning unit)Quick connect Detachable umbilical for simple integration; available in 3 lengths
SupplyElectrical req. L/N/PE 100 – 240 VAC, 50/60 HzPower consumption C.0101: max. 0.4 kW, C.0301: max. 0.7 kW IP rating → Marking unit: IP54 (optional IP65)
→ Supply unit: IP32 (optional IP54, IP65)Cooling Air-cooledTemp./Humidity 5 – 40 °C / 10 %-90 %, non-condensingWeight → Marking unit C.0101 (IP54) ~14 kg → Marking unit C.0301 (IP54) ~21 kg
→ Supply unit (IP32/IP54) approx. 7 kg
Applicable CertificationsCE, TÜV/NRTL, FCCRoHS compliant
