FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards...

12
1 1-Phase Line Filters FMAB NEO https://www.schurter.com /PG84 EMC Products AC Filter, High Symmetrical Attenuation Bolt and nut M4 Case PK Quick connect terminals 6.3x0.8 mm Case PG Wire leads Case PI See below: Approvals and Compliances Description - Line-filter in standard version - 1-stage - high attenuation - 3 designs Unique Selling Proposition - Excellent symmetrical attenuation - Compact and cost optimized - Completely closed steel housing - Optional wire leads Characteristics - Compact filter with high symmetrical attenuation - Designed for universal industrial applications - Especially designed forapplications with symmetrical noise caused by switching semiconductors - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Version with wire connection - Version with varistor for overvoltage protection Weblinks pdf data sheet, html datasheet, General Product Information, Distributor- Stock-Check, Detailed request for product, Microsite Technical Data Ratings IEC 1 - 60 A @ Ta 40 °C / 250 VAC; 50 Hz Ratings UL/CSA 1 - 60 A @ Ta 40 °C / 125/250 VAC; 60 Hz Leakage Current industrial < 1 mA (250 V / 60 Hz) Dielectric Strength > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) Allowable Operation Tempe- rature -40 °C to 100 °C Climatic Category 40/100/21 acc. to IEC 60068-1 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Terminal Quick connect terminal 6.3 x 0.8 mm Bolt and nut Material: Housing Metal Line Filter Standard, medical and industrial ver- sion, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details MTBF > 200'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree- ments by SCHURTER. Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FMAB NEO Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40041643 UL Approvals UL UL File Number: E72928

Transcript of FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards...

Page 1: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

1

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

AC Filter, High Symmetrical Attenuation

Bolt and nut M4 Case PK Quick connect terminals 6.3x0.8 mm Case PG Wire leads Case PI

See below: Approvals and Compliances

Description- Line-filter in standard version- 1-stage- high attenuation- 3 designs

Unique Selling Proposition- Excellent symmetrical attenuation- Compact and cost optimized- Completely closed steel housing- Optional wire leads

Characteristics- Compact filter with high symmetrical attenuation- Designed for universal industrial applications- Especially designed forapplications with symmetrical noise caused by

switching semiconductors- Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1

Other versions on request- Version with wire connection- Version with varistor for overvoltage protection

Weblinkspdf data sheet, html datasheet, General Product Information, Distributor-Stock-Check, Detailed request for product, Microsite

Technical DataRatings IEC 1 - 60 A @ Ta 40 °C / 250 VAC; 50 HzRatings UL/CSA 1 - 60 A @ Ta 40 °C / 125/250 VAC;

60 HzLeakage Current industrial < 1 mA (250 V / 60 Hz)Dielectric Strength > 1.7 kVDC between L-N

> 2.7 kVDC between L/N-PE Test voltage (2 sec)

Allowable Operation Tempe-rature

-40 °C to 100 °C

Climatic Category 40/100/21 acc. to IEC 60068-1Protection Class Suitable for appliances with protection

class I acc. to IEC 61140Terminal Quick connect terminal 6.3 x 0.8 mm

Bolt and nutMaterial: Housing Metal

Line Filter Standard, medical and industrial ver-

sion, IEC 60939, UL 1283, CSA C22.2 no. 8 Technical Details

MTBF > 200'000 h acc. to MIL-HB-217 F

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-ments by SCHURTER.

ApprovalsThe approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: FMAB NEO

Approval Logo Certificates Certification Body Description

VDE Approvals VDE Certificate Number: 40041643

UL Approvals UL UL File Number: E72928

Page 2: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

2

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Product standardsProduct standards that are referenced

Organization Design Standard Description

Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes

Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference

Designed according to UL 498 Standard for Attachment Plugs and Receptacles

Designed according to UL 1283 Electromagnetic interference filters

Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters

Application standardsApplication standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment.

CompliancesThe product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/863

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force.

Dimension [mm]Case PG with quick connect terminals

9.5

max. 24.8

max

. 44

21

9.5

16.2

21

32.5

max. 35.5

6.3x0.8(5x)

ø 5.3

5464

6.3

max. 58

±0.

3

1) 2)

1) Line 2) Load

Page 3: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

3

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

Case PH with quick connect terminals

11

max. 22.8

max

. 51

21

11

17.7

45

max. 47.1

6.3x0.8(5x)

ø 5.3

6171

6.3

max. 70

21

±0.

31) 2)

1) Line 2) Load

Case PI with quick connect terminals

27

6.3

max. 90

max. 65.3

max. 85.5

75

12.5

ø 5.

3

max

. 54.

5

±0.3

6.3x0.8(5x)

max. 50.3

19.9

27

12.5

max

. 30.

8

21

1) 2)

1) Line 2) Load

Page 4: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

4

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Case PK with quick connect terminals

27

6.3

max. 90

max. 65.3

max. 85.5

75

12.5

ø 5.

3

max

. 54.

5

±0.3

6.3x0.8(5x)

max. 53.3

27

12.5

max

. 40.

8

30

1) 2)

1) Line 2) Load

Case PK with bolt and nut

27

6.3

max. 95

PE M4x161.2-1.5 Nm

max. 65.3

max. 85.5

3)

4)

75

12.5

ø 5.

3

max

. 54.

5

±0.3

M4(5x)

max. 53.3

27

12.5

max

. 40.

8

30

1) 2)

1) Line 2) Load 3) Nut torque 0.8...1 Nm, keep lock-nut fastened 4) Lock-nut do not unscrew

Page 5: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

5

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

Case QC with quick connect terminals

9.5

max. 30

max

. 44

21

9.5

15.8

21

32.5

max. 35.5

6.3x0.8(5x)

ø 5.3

5464

6.3

max. 58

±0.

3

1) 2)

1) Line 2) Load

Case QD with quick connect terminals

11 max

. 30

11

max. 45max. 76

max. 71

21 max. 51

19.5

21

61

20

±0.3

max

. 30

6.3x0.8(5x)

ø 5

.3

6.3

max

. 47

1) 2)

1) Line 2) Load

Page 6: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

6

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Case QE with bolt and nut

25

6.0

max. 124

PE M4x161.2-1.5 Nm

max. 95

max. 114

3)

4)

103

12.5

ø 4.

4

max

. 58

±0.3

M4(5x)

max. 57

25

12.5

max

. 46

32.5

1) 2)

1) Line 2) Load 3) Nut torque 0.8...1 Nm, keep lock-nut fastened 4) Lock-nut do not unscrew

Case QF with bolt and nut

max.151 max.85

max.100

PE M6x143-4 Nm

3)

4)

40

19.5

40

19.5

max

. 58

max

. 106

10

ø 4.4

(4x)

51 ±0.3

M6(5x)

95±

0.1

1) 2)

1) Line 2) Load 3) Nut torque 3...4 Nm, keep lock-nut fastened 4) Do not unscrew lock-nut

Page 7: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

7

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

Case with wire leads

L'

N'

L

PE

N

1) 2)

1 - 3 A AWG 20 6 - 10 A AWG 18 12 - 16 A AWG 16 20 A AWG 14 25 - 30 A AWG 12

140 ±5 140 ±5

3)

5)

3)

4)

5)

1) Line 2) Load 3) Brown 4) Yellow-Green 5) Blue

Diagrams

Standard Version or medical M80 Design N, P

1) 2)

1) Line 2) Load

Medical Version (M5) Design N, P

1) 2)

1) Line 2) Load

Standard Version or medical M80 Design Q

1) 2)

1) Line 2) Load

Medical Version (M5) Design Q

1) 2)

1) Line 2) Load

Page 8: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

8

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Attenuation Loss. . . . . 0.1/100Ω differential mode ........... 100/0.1Ω differential mode - - - - 50Ω differential mode _____ 50Ω common mode

Standard version

1 A / Design N 3 A / Design N 4 A / Design N 6 A / Design N

8 A / Design N 10 A / Design N 12 A / Design N 16 A / Design N

20 A / Design N 30 A / Design N 1 A / Design P 3 A / Design P

6 A / Design P 10 A / Design P 12 A / Design P 16 A / Design P

20 A / Design P 30 A / Design P 60 A / Design P 1 A / Design Q

3 A / Design Q 6 A / Design Q 10 A / Design Q 12 A / Design Q

16 A / Design Q 20 A / Design Q 30 A / Design Q 60 A / Design Q

Page 9: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

9

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

Medical version (M5)

1 A / Design N 3 A / Design N 4 A / Design N 6 A / Design N

8 A / Design N 10 A / Design N 12 A / Design N 16 A / Design N

20 A / Design N 30 A / Design N 1 A / Design P 3 A / Design P

6 A / Design P 10 A / Design P 12 A / Design P 16 A / Design P

20 A / Design P 30 A / Design P 60 A / Design P 1 A / Design Q

3 A / Design Q 6 A / Design Q 10 A / Design Q 12 A / Design Q

16 A / Design Q 20 A / Design Q 30 A / Design Q 60 A / Design Q

Page 10: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

10

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Medical version (M80)

1 A / Design N 3 A / Design N 4 A / Design N 6 A / Design N

8 A / Design N 10 A / Design N 12 A / Design N 16 A / Design N

20 A / Design N 30 A / Design N 1 A / Design P 3 A / Design P

6 A / Design P 10 A / Design P 12 A / Design P 16 A / Design P

20 A / Design P 30 A / Design P 60 A / Design P 1 A / Design Q

3 A / Design Q 6 A / Design Q 10 A / Design Q 12 A / Design Q

16 A / Design Q 20 A / Design Q 30 A / Design Q 60 A / Design Q

Page 11: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

11

1-Phase Line Filters FMAB NEOhttps://www.schurter.com /PG84

EMC Products

All Variants

Rated current

Filter-Type Terminal Design Lea-kage

Ri Power Loss

Weight Housings Packa-ging

Order Number

[A] [mA] [mΩ] [W] [g] [ST]

1 Standard version Quick connect terminal 6.3 x 0.8 mm N 0.5 475 1 72 g PG 15 5500.2630.01

1 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 320 0.65 80 g QC 15 5500.2640.01

1 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 320 0.65 66 g PG 15 5500.2650.01

3 Standard version Quick connect terminal 6.3 x 0.8 mm N 0.5 83 1.5 104 g PH 15 5500.2631.01

3 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 36 0.65 81 g QC 15 5500.2641.01

3 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 36 0.65 70 g PG 15 5500.2651.01

4 Standard version Quick connect terminal 6.3 x 0.8 mm N 0.5 53 1.7 108 g PH 15 5500.2632.01

6 Standard version Quick connect terminal 6.3 x 0.8 mm N 0.5 32.5 2.4 109 g PH 15 5500.2633.01

6 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 12 0.86 80 g QC 15 5500.2642.01

6 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 12 0.86 100 g PG 15 5500.2652.01

8 Standard version Quick connect terminal 6.3 x 0.8 mm N 0.5 29.2 3.8 190 g PI 10 5500.2634.01

10 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 5 1 87 g QC 15 5500.2643.01

10 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 5 1 90 g QC 15 5500.2653.01

12 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 4 1.2 92 g QC 15 5500.2644.01

12 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 4 1.2 90 g QC 15 5500.2654.01

16 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 2 1 138 g QD 15 5500.2645.01

16 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 2 1 136 g QD 15 5500.2655.01

20 Standard version Quick connect terminal 6.3 x 0.8 mm P 0.5 1.9 1.5 206 g PI 10 5500.2646.01

20 Standard version Quick connect terminal 6.3 x 0.8 mm Q 0.5 1.9 1.5 204 g PI 10 5500.2656.01

10 Industrial version Quick connect terminal 6.3 x 0.8 mm N 1 22.8 4.6 200 g PI 10 5500.2635.01

12 Industrial version Quick connect terminal 6.3 x 0.8 mm N 1 13.2 3.8 201 g PI 10 5500.2636.01

16 Industrial version Quick connect terminal 6.3 x 0.8 mm N 1 7.2 3.7 308 g PK 10 5500.2637.01

20 Industrial version Quick connect terminal 6.3 x 0.8 mm N 1 6.0 4.8 322 g PK 10 5500.2638.01

30 Industrial version Bolt and nut M4 P 1 1 1.8 450 g QE 5 5500.2647.03

30 Industrial version Bolt and nut M4 Q 1 1 1.8 450 g QE 5 5500.2657.03

30 Industrial version Bolt and nut M4 N 1 2.9 5.2 355 g PK 10 5500.2639.03

60 Industrial version Bolt and nut M6 P 1 1 7.2 1220 g QF 1 5500.2648.03

60 Industrial version Bolt and nut M6 Q 1 1 7.2 1220 g QF 1 5500.2658.03

1 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 475 1 72 g PG 15 5500.2630.04

1 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 320 0.65 80 g QC 15 5500.2640.04

1 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 320 0.65 66 g PG 15 5500.2650.04

3 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 83 1.5 104 g PH 15 5500.2631.04

3 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 36 0.65 81 g QC 15 5500.2641.04

3 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 36 0.65 70 g PG 15 5500.2651.04

4 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 53 1.7 108 g PH 15 5500.2632.04

6 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 32.5 2.4 109 g PH 15 5500.2633.04

6 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 12 0.86 80 g QC 15 5500.2642.04

6 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 12 0.86 100 g PG 15 5500.2652.04

8 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 29.2 3.8 190 g PI 10 5500.2634.04

10 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 22.8 4.6 200 g PI 10 5500.2635.04

10 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 5 1 87 g QC 15 5500.2643.04

10 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 5 1 90 g QC 15 5500.2653.04

12 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 13.2 3.8 201 g PI 10 5500.2636.04

12 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 4 1.2 92 g QC 15 5500.2644.04

12 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 4 1.2 90 g QC 15 5500.2654.04

16 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 7.2 3.7 308 g PK 10 5500.2637.04

16 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 2 1 138 g QD 15 5500.2645.04

16 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 2 1 136 g QD 15 5500.2655.04

20 Medical (M5) Quick connect terminal 6.3 x 0.8 mm N 0.005 6.0 4.8 322 g PK 10 5500.2638.04

20 Medical (M5) Quick connect terminal 6.3 x 0.8 mm P 0.005 1.9 1.5 206 g PI 10 5500.2646.04

20 Medical (M5) Quick connect terminal 6.3 x 0.8 mm Q 0.005 1.9 1.5 204 g PI 10 5500.2656.04

30 Medical (M5) Bolt and nut M4 P 0.005 1 1.8 450 g QE 5 5500.2647.06

30 Medical (M5) Bolt and nut M4 Q 0.005 1 1.8 450 g QE 5 5500.2657.06

Page 12: FMAB NEO - 1-Phase Line Filters2 FMAB NEO 1-Phase Line Filters /PG84 EMC Products Product standards Product standards that are referenced Organization Design Standard Description Designed

12

1-Phase Line FiltersFMAB NEO https://www.schurter.com /PG84

EMC Products

Rated current

Filter-Type Terminal Design Lea-kage

Ri Power Loss

Weight Housings Packa-ging

Order Number

[A] [mA] [mΩ] [W] [g] [ST]

30 Medical (M5) Bolt and nut M4 N 0.005 2.9 5.2 355 g PK 10 5500.2639.06

60 Medical (M5) Bolt and nut M6 P 0.005 1 7.2 1220 g QF 1 5500.2648.06

60 Medical (M5) Bolt and nut M6 Q 0.005 1 7.2 1220 g QF 1 5500.2658.06

1 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 475 1 72 g PG 15 5500.2630.07

1 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 320 0.65 80 g QC 15 5500.2640.07

1 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 320 0.65 66 g PG 15 5500.2650.07

3 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 83 1.5 104 g PH 15 5500.2631.07

3 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 36 0.65 81 g QC 15 5500.2641.07

3 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 36 0.65 70 g PG 15 5500.2651.07

4 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 53 1.7 108 g PH 15 5500.2632.07

6 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 32.5 2.4 109 g PH 15 5500.2633.07

6 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 12 0.86 80 g QC 15 5500.2642.07

6 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 12 0.86 100 g PG 15 5500.2652.07

8 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 29.2 3.8 190 g PI 10 5500.2634.07

10 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 22.8 4.6 200 g PI 10 5500.2635.07

10 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 5 1 87 g QC 15 5500.2643.07

10 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 5 1 90 g QC 15 5500.2653.07

12 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 13.2 3.8 201 g PI 10 5500.2636.07

12 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 4 1.2 92 g QC 15 5500.2644.07

12 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 4 1.2 90 g QC 15 5500.2654.07

16 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 7.2 3.7 308 g PK 10 5500.2637.07

16 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 2 1 138 g QD 15 5500.2645.07

16 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 2 1 136 g QD 15 5500.2655.07

20 Medical (M80) Quick connect terminal 6.3 x 0.8 mm N 0.08 6.0 4.8 322 g PK 10 5500.2638.07

20 Medical (M80) Quick connect terminal 6.3 x 0.8 mm P 0.08 1.9 1.5 206 g PI 10 5500.2646.07

20 Medical (M80) Quick connect terminal 6.3 x 0.8 mm Q 0.08 1.9 1.5 204 g PI 10 5500.2656.07

30 Medical (M80) Bolt and nut M4 P 0.08 1 1.8 450 g QE 5 5500.2647.09

30 Medical (M80) Bolt and nut M4 Q 0.08 1 1.8 450 g QE 5 5500.2657.09

30 Medical (M80) Bolt and nut M4 N 0.08 2.9 5.2 355 g PK 10 5500.2639.09

60 Medical (M80) Bolt and nut M6 P 0.08 1 7.2 1220 g QF 1 5500.2648.09

60 Medical (M80) Bolt and nut M6 Q 0.08 1 7.2 1220 g QF 1 5500.2658.09

Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

3 designs N) excellent symmetrical noise attenuation P) high symmetrical noise attenuation Q) standard symmetrical noise attenuation

The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.

30.0

1.20

20