nz.rs-online.com

Fluke Process Calibration

Tools

What issues do you face?

• Ensuring continuous uptime

• Maintaining good ROI for equipment

• Compliance• Process improvement• Increase effi ciency

What issues do you face?

• Complying with quality regulations

• Maintaining documentation of processes

Bench PressureController Deadweight Testers Handheld Pressure

Calibrators Pressure Gauge

750 719PRO 721 729

700G

6532 31206241

mA Loop Calibrator

Precision Multimeter Process Calibrators

Infrared Calibrator

Temperature Readouts and Probes

Bench Temperature Sources Software Solutions

FLUKE PROCESS CALIBRATION SOLUTIONS

Maintenance ManagerFocus: Maintaining plant uptime and maintenance effi ciency.

Quality ManagerFocus: Maintaining and documenting product quality

4181 1524 PROBES 9100S 9144 DPC/TRACK2

* Diagram is not intended to be an exact representation. Diagram components are not to scale and are for illustration purposes only.

What issues do you face?

• Monitor and maintain sensors and transmissions

• Accurate measurements

What issues do you face?• Making accurate

measurements• Documenting procedures

• Increasing throughput

Bench PressureController Deadweight Testers Handheld Pressure

Calibrators Pressure Gauge

700G

mA Loop Calibrator

Precision Multimeter Process Calibrators

725 754 789 7526A

Infrared Calibrator

Temperature Readouts and Probes

Bench Temperature Sources Software Solutions

FLUKE PROCESS CALIBRATION SOLUTIONS

Field Calibration TechnicianFocus: Calibrating and verifying measurement devices

Instrumentation Technician Focus: Maintaining and verifying instrumentation throughout the plant

773 8846A

* Diagram is not intended to be an exact representation. Diagram components are not to scale and are for illustration purposes only.

4

ELECTRICAL, MULTIFUNCTION AND MA LOOP CALIBRATION

Visit nz.rs-online.com to order today!

7442524 Multifunction Documenting Process Calibrator

FLUKE-753

7442527 Multifunction Documenting Process Calibrator with HART®

FLUKE-754

2552452211 Fluke 754 & 750 SW DPCTrack2™ Software Bundle

FLUKE-754/750SW

Fluke 750 Series Multifunction Documenting Process Calibrators• Calibrate temperature, pressure, voltage,

current, resistance and frequency• 3 operating modes: measure;

source; simultaneous measure/source with loop power

• Easy-to-follow, menu-driven display which guides users through tasks and logged measurements

NA

3317452 Up to 0.02% accuracy FLUKE-725

2552452209 ATEX Certified Multifunction Process Calibrator

FLUKE-725 EX

8507685 Up to 0.01% accuracy with HART resistor mode

FLUKE-726

Fluke 720 Series Multifunction Process Calibrators• Precise measurement and calibration

source performance, accuracies up to 0.01% (for Fluke-726)

• Two separate channels; measure, source and view process signals simultaneously

• Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters

NA

7769529 0-30V, 0-24mA, source/measure, loop power

FLUKE-709

7769523 0-30V, 0-24mA, source/measure, loop power with HART

FLUKE-709H

1812322 0-30V, 0-24mA, Loop Valve Tester with HART

FLUKE-710

Fluke Precision mA Loop Calibrators• Intuitive interface with Quick-

Set rotary encoder knob for fast setup and ease-of-use

• Best in class accuracy at 0.01% reading• Pre-configured Valve Test with

ValveTrack™ software (710)

NA

414193 5.5 Digit Multimeter 8808A 240V

Fluke Calibration 8808A Bench Digital Multimeter• 5.5 Digit Resolution with 0.015%

basic DC V accuracy• Dual display to measure different

signal characteristics such as volts and current simultaneously

• Dedicated current ranges to measure DC leakage current (i-Leakage mode)

NA

2552446811 Precision Process Calibrator 7526A

Fluke Calibration 7526A Precision Process Calibrator• Sources and measures DC voltage, current,

resistance, RTDs and thermocouples• Extend pressure measurement range with

any Fluke 750P Series Pressure Modules• Includes 24 V DC transmitter

loop power supply

NA

3254777 0-24mA, 0.025% accuracy FLUKE-705

4262678 0-24mA, 0.015% accuracy FLUKE-707

4547266 ATEX Certified 0-24mA, 0.015% accuracy

FLUKE-707EX

2632700 0.015% accuracy with voltage sourcing

FLUKE-715

Fluke Volt/ mA Calibrators• Clear 5 digit LCD display• 25% steps for fast, easy linearity checks• Measurement of 0-20mA, 0-28V

(705/707), 0-200mV, 0-25V (715)• Source or simulate 4-20mA loop current

NA

1347345 20mA DC current source/measure/simulate

FLUKE-787B

4477707 24V Loop power, HART mode setting with loop power

FLUKE-789

Fluke 787B and 789 ProcessMeter™

• Digital multimeter and a loop calibrator in a single portable device

• 20 mA DC current source/ measure/simulate

• CAT IV 600 V rating

NA

287642 Measure 4-20 mA signal FLUKE-771

6693490 Measure and source mA with 24 V loop power

FLUKE-772

6693493 Measure and source mA and DC voltage FLUKE-773

Fluke 770 Series Milliamp Process Clamp Meters• Troubleshoots transmitters,

valves, PLC and DCS signals• Measures in-circuit current of 4 - 24 mA

DC signals without breaking the loop• Detachable jaw clamp• Accuracy of 0.2%

NA

6159978 6.5 Digit Multimeter, 24ppm 8846A

2552446831 6.5 Digit Multimeter, 35ppm 8845A

Fluke Calibration 8846A/ 8845A Bench Digital Multimeter• 6.5 Digit Resolution • Basic V DC accuracy of up to 0.0024% • 100 μA to 10 A current range,

with up to 100 pA resolution

NA

5

For latest stock availability & pricing visit nz.rs-online.com!

PRESSURE CALIBRATION

1445553 30 psi, 2 Bar Automatic Pressure Calibrator

FLK-729 30G/FC

2552452208 300 psi, 20 bar Automatic Pressure Calibrator

FLK-729 300G/FC

2552452210 Automatic Pressure Calibrator, DPCTrack2™ Software

FLUKE-729/750SW BU

Fluke 729 Automatic Pressure Calibrator• Automatic pressure generation

and regulation to 300 PSI• Measure, source and simulate

4 to 20 mA signals • HART communication for

testing HART smart transmitters

NA

4477713 1G - 10,000G Variations FLUKE 717 100G

6239917 30G, 100G, 300G Variations FLUKE 718 300G

520715 30G, 100G, 300G Variations, ATEX II 1 G Ex ia IIC T4

FLUKE 718 EX 300G

6622362 30G, 100G Variations FLUKE 719 100G

Fluke 717, 718/Ex and 719 Pressure Calibrators• Pressure switch test makes difficult

tasks easy, captures set, reset and deadband values of a pressure switch

• Fluke 717 and 718 measures pressure to 0.025 % of full scale with internal sensor

• Measure mA with 0.015 % accuracy and 0.001 mA resolution while sourcing 24 V loop power

NA

7999140 30 PSIG (2 bar) Fluke-719Pro-30G

7999159 150 PSIG (10 bar) Fluke-719Pro-100G

7999152 300 PSIG (20 bar) Fluke-719Pro-300G

Fluke 719Pro Pressure Calibrator• Unique integrated electric pump for

one handed pressure calibration• Precision pressure adjust vernier for easy

and accurate pressure calibration• 30 PSI, 150 PSI and 300 PSI (2, 10

and 20 bar) measurement range

NA

7961595 Stainless steel sensors 0.025% accuracy

Fluke-721-1601 - 3650

Fluke 721/Ex Precision Pressure Calibrators• Dual isolated sensors for gas flow

calibration (custody transfer) applications• Includes Pt100 RTD input for temperature

measurement (probe optional)• 14 measurement variations

NA

8052258 Differntial 0 to 10 in H2O (0 to 25 mBar)

FLUKE-750P01

8052311 Absolute 0 to 5 psia (0 to 350 mBar)

FLUKE-750PA3

8052343 Dual -1 to 1 psi (-70 to 70 mBar) FLUKE-750PD2

Fluke 750P Series Pressure Modules• Differential, gage, absolute, vacuum

and dual pressure modules available from 2.5 mBar to 690 Bar

• Improved total uncertainty with reference class accuracies as good as 0.01%

• Absolute pressure measurement now to 1,500 PSIA, 100 bar

NA

2552446803 I.S. Pressure Module, 0-10 in. H20 diff (0 to 25 mbar)

FLUKE-750P01EX

2552446804 I.S. Pressure Module, 0-30 PSIG (0 to 2 bar)

FLUKE-750P05EX

2552446809 I.S. Pressure Module, 3000PSIG wet (0 to 200 bar)

FLUKE-750P29EX

2552446810 I.S. Pressure Module, 0-15 PSIA (0 to 1 bar)

FLUKE-750PA4EX

Fluke 750PEx Pressure Modules• 8 Intrinsically Safe models, certified

to ATEX: II 1 G Ex ia IIC T4 Ga• Up to 0.01 % reference uncertainty• Temperature compensated 0 °C to 50 °C

NA

7588920 600 psi FLUKE-700PTPK

7588926 10,000 psi FLUKE-700HTPK

9083770 600 psi premium FLUKE-700PTPK2

9083789 10,000 psi premium FLUKE-700HTPK2

Fluke 700PTPK/HTPK Pressure Pump Kits• Combine with any Fluke 700G

Series Gauge to make a complete pressure testing kit

• Easy-to-use and of rugged construction for reliable performance in different environments

• Hard case protects pump and gauge

NA

2552446876 NPT Manifold, HC20 Test Port Connections

2271A-NPT-HC20

2552446877 BSP Manifold, HC20 Test Port Connections

2271A-BSP-HC20

2552446878 NPT Manifold, P3000 Test Port Connections

2271A-NPT-P3K

Fluke Calibration 2271A Benchtop Pressure Calibrator• Calibrate a wide range of gauges and

sensors with a single instrument• Wide measurement range from -100

kPa to 20 MPa (-15 to 3000 psi)• Removable pressure measurement

modules make it easy to change or add measurement ranges

NA

7988695 -10 to +10 inH2O (-20 mbar to 20 mbar)

FLUKE-700G01

7988720 -14 to 2000 PSI (-.97 bar to 140 bar) FLUKE-700G10

7588910 -14 to 5000 PSI (-0.97 to 340 bar) FLUKE-700G30

7588923 700G/TRACK Logging Software 700G/TRACK

Fluke 700G Precision Pressure Test Gauges• Rugged, high-quality pressure gauge

calibrator for fast and accurate test results• 23 ranges from 15 PSI/1 bar to 10,000

PSI/690 bar and 0.05 % accuracy• Use the 700G/TRACK Software to upload

over 8,000 logged pressure measurements

NA

6

Visit nz.rs-online.com to order today!

MULTIFUNCTION/CALIBRATION

2552446884 –15 psi to 15 psi, –100 kPa to 100 kPa

2700G-BG100K

2552446887 –12 psi to 300 psi, –80 kPa to 2 MPa

2700G-BG2M

2552446890 0 to 3000 psi, 0 to 20 MPa 2700G-G20M

2552446892 0 to 10 000 psi, 0 to 70 MPa 2700G-G70M

Fluke Calibration 2700G Series Reference Pressure Gauges• Precision pressure measurement

from 100 kPa (15 PSI, 1 bar) to 70 MPa (10 000 PSI, 700 bar)

• Accuracy to 0.02% of full scale• Easy-to-use, rugged construction

for reliable performance

NA

2552446870 -80 kPa to 2 MPa 3130-G2M

Fluke Calibration 3130-G2M Portable Pressure Calibrator• Measure and generate pressures from

vacuum to 2 MPa (300 psi, 20 bar)• Internal pump can generate vacuum

to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar)

• Supply pressure connection allowing the use of external gas supply up to 2 MPa (300 psi, 20 bar)

NA

2552446880 0 to 300 psi (20 bar) P5510-2M

2552446881 0 to 3,000 psi (210 bar) P5513-20M

Fluke Calibration P551X Pneumatic Pressure Comparators• Dual pressure/vacuum capability• Bench mount design• Built-in handpump as pressure/

vacuum source• High quality needle valve for fine control

NA

2552446882 0 to 10,000 psi (700 bar) P5514-70M

2552446883 0 to 20,000 psi (1,400 bar) P5515-140M

Fluke Calibration P551X Hydraulic Pressure Comparators• Operational with a wide range of fluids• Built-in hand pump for system priming

and large volume applications• High quality screw press for pressure

generation and fine pressure control

NA

2552446871 21 MPa (3000 psi) 700HPPK-BSP

Fluke Calibration 700HPPK Pneumatic Test Pump Kit• Generate and adjust pneumatic

pressures up to 21 MPa (3000 psi)• Rugged, portable and stable enough

to go anywhere -- on any surface• Reaches pressure in 20 seconds to

full scale into a 30 cm³ volume

NA

2552452213 30 to 1 000 mbar P3011-MBAR-P

2552452212 1 to 30 inHg P3011-INHG-P

2552452214 20 to 760 mmHg P3011-MMHG-P

Fluke Calibration P3011 Vacuum and Dual Vacuum Deadweight Testers• 0.015% of reading accuracy standard

(increased accuracy option of 0.008 %) • Air Operated – Single PCU Model Variations• Models available with built-

in pump -P optional

NA

2552452215 P3012-KPA-P 1.5 to 100 kPa P3012-KPA-P

2552452216 P3013-KPA-P 3 to 200 kPa P3013-KPA-P

2552452217 P3014-KPA-P 20 to 1 000 kPa P3014-KPA-P

2552452218 P3015-KPA-P* 20 to 3 500 kPa P3015-KPA-P

Fluke Calibration P301X Series Gas Deadweight Testers• Pneumatic Deadweight Tester range• 0.015% of reading accuracy standard

(increased accuracy option of 0.008 %) • P3015 models available with

built-in pump -P optional

NA

2552452219 P3111-BAR: 1 to 35 bar P3111-BAR

2552452221 P3112-BAR: 4 to 140 bar P3112-BAR

2552452222 P3113-BAR : 10 to 350 bar P3113-BAR

2552452224 P3114-BAR: 20 to 700 bar P3114-BAR

Fluke Calibration P3100 Series Hydraulic Deadweight Testers• 0.015% of reading accuracy

standard (0.008% optional)• Single or dual piston formats• Built-in hand pumps standard• Mounted spirit level with adjustable feet

NA

2552446874 A200M, 20 to 200 MPa 6531-200M-B

Fluke Calibration 6531-200M-B Electronic Deadweight Tester• No weights to load and unload,

transport or send out for calibration• Provides real-time pressure indication

with no need to know and correct for local gravity or ambient temperature

• No piston-cylinder changes

NA

PRESSURE CALIBRATION

7

For latest stock availability & pricing visit nz.rs-online.com!

TEMPERATURE CALIBRATION

8052412 Measure and simulate 13 different RTD FLUKE-712B

8052416 Measure and simulate 17 different RTD FLUKE-714B

3751616 Source/measure TCs, RTDs, volts and ohms

FLUKE-724

Fluke Handheld Temperature Calibrators• Configurable 0 % and 100 % source

settings for quick 25 % linearity checks• Linear ramp and 25 % step auto ramp

based on 0 % and 100 % settings• Dual inputs and backlit display for

easy interpretation of measurements

NA

2552446849 35 °C to 375 °C 9100S-A-256

2552446850 35 °C to 375 °C 9100S-B-256

2552446851 35 °C to 375 °C 9100S-C-256

537048 –10 °C to 122 °C 9102S-256

Fluke Calibration 9100S/9102S Handheld Dry-Well Calibrators• Smallest dry-wells in the world• Ranges from 35°C to 375°C

(9100S), –10°C to 122°C (9102S)• Accuracy to ± 0.25 °C, stability

of ± 0.07°C at 50°C (9100S), ± 0.05 °C full range (9102S)

NA

2552446893 35 °C to 350 °C 9140-A-256

2552446898 –25 °C to 140 °C 9103-A-256

2552446903 –15 °C to 350 °C 9009-B-256

Fluke Calibration Field Dry-Wells• Lightweight and portable field

dry-well small enough to easily carry in one hand (9140)

• Portable instrument with accuracy to ± 0.25 °C (9103)

• Two-in-one dry-well increases portability and productivity (9009)

• Display accuracy: hot block: ± 0.6°C; cold block: ±0.2°C (9009)

NA

2552446853 33 °C to 350 °C 9143-A-256

2552446859 50 °C to 660 °C 9144-A-256

Fluke Calibration 914X Series and 9190A Field Metrology Wells• Lightweight, portable, and fast• Accuracy using built-in reference

thermometer readout: ± 0.05°C full range (9190A)

• Built-in two-channel readout for PRT, RTD, thermocouple, 4-20 mA current in the process option

NA

2552446866 Portable Bath, 35°C to 250°C, 230 VAC

6109A-256

2552446867 Portable Bath, 35°C to 250°C, Proc Elec, 230 VAC

6109A-P-256

2552446868 Portable Bath, -25°C to 140°C, 230 VAC

7109A-256

2552446869 Portable Bath, -25°C to 140°C, with Proc Elec, 230 VAC

7109A-P-256

Fluke Calibration 6109A/7109A Portable Calibration Baths• Calibrate up to four tri-clamp sanitary

sensors, or a batch of sanitary RTDs and temperature transmitters at the same time

• Excellent display accuracy of ±0.1 °C provides 4:1 test uncertainty ratio (TUR) for critical applications

• Wide temperature range covers most clean process applications

NA

2552446905 -15°C to 120°C 4180-256

2552446906 35°C to 500°C 4181-256

2552446907 50°C to 500°C, portable 9132-256

2552446908 –30°C to 150°C, portable 9133-256

Fluke Calibration Precision Infrared Calibrators• Accredited performance for point

and shoot calibrations (4180/4181)• Verify IR pyrometers from –30°C

to 500°C (9132/9133)• RTD reference well for contact

temperature measurement (9132/9133)

NA

2552446817 Up to 40 input channels 1586A 240/C

2552446828 Up to 60 input channels 2638A/60 240

2552446814 Most accurate temperature and humidity data loggers

1620A-S-256

Fluke Calibration 1586A & 2638A Data Acquisition Systems• Measure thermocouples, PRTs,

thermistors, DC voltage, DC current and resistance (1586A)

• Best-in-class temperature measurement accuracy - PRTs: ± 0.005°C (using external DAQ-STAQ Multiplexer), Thermistors: ± 0.002°C (1586A)

• DC accuracy of 0.0024% (2638A)• Thermocouple accuracy of 0.5°C (2638A)

NA

2552446833 1 Channel 1523-256

2552446837 2 Channel, Data Logger 1524-256

7414318 RTD, ATEX 1551A-12

7414330 PRT, ATEX 1552A-12

Fluke Calibration Digital Thermometers• Measure, graph and record three sensor

types with one tool (1523/1524)• High accuracy: PRTs: ± 0.011°C;

Thermocouples: ± 0.24°C; Thermistors: ± 0.002°C (1523/1524)

• Best substitute for precision mercury-filled glass thermometers (1551AEx/1552AEx)

• Intrinsically safe, accuracy of ± 0.05°C over full range (1551AEx/1552AEx)

NA

2552446841 2 TC and 2 PRT/Thermistor inputs 1529-256

2552446844 PRT Readout 1502A-256

2552446846 PRT Readout, with IEEE-488 1504-256

Fluke Calibration Thermometer Readouts• Lab-quality accuracy on four channels for

PRTs, thermistors and thermocouples (1529)• Accuracy of ±0.0025°C - meter only (1529)• Single-channel reference

thermometers, accurate to ±0.006°C - meter only (1502A/1504)

• Two models to choose from —reading PRTs or thermistors (1502A/1504)

NA

Whatever you need from RS, we are here to help. Visit nz.rs-online.com

RS New Zealand offers a global range of products, services and solutions... delivered by local experts. RS New Zealand continues to provide innovative products and best-in-class customer services.

We offer an unrivalled portfolio of 500,000+products, in stock in our global network of distribution centres. Plus 60,000+ products available for next day delivery across New Zealand.

Our dedicated New Zealand team is well positioned to serve you whatever your needs may be and will be available to answer your call always.

Global access, with local service.

Mukesh Sharma New Zealand Manager T: 027 296 1557 E: mukesh.sharma@rs-components.com

Mike Lander Account Manager T: 021 975 621 E: mike.lander@rs-components.com

Tom Bainbridge Account Manager T: 027 474 7009 E: tom.bainbridge@rs-components.com

Tim Keery Account Manager T: 027 474 7122 E: tim.keery@rs-components.com

Luke Tran Internal Account Executive T: 09 571 1137 E: luke.tran@rs-components.com

Mehran Hossain Internal Account Manager T: 09 571 1131 E: mehran.hossain@rs-components.com

Customer Services & Technical Support Mon - Fri (8am - 5pm)T: 0800 888 780 | F: 0800 888 700 Email for quotes: quotesnz@rs-components.com Email for orders: ordersNZ@rs-components.com

Mirjana Bogicevic Customer Care Executive T: 0800 888 780 E: ordersNZ@rs-components.com

Get in touch today!