FlowMaster Hydraulic Pump - s3. · PDF fileFlowMaster: A high-performance pump that works in...
-
Upload
duonghuong -
Category
Documents
-
view
215 -
download
1
Transcript of FlowMaster Hydraulic Pump - s3. · PDF fileFlowMaster: A high-performance pump that works in...
FlowMaster: A high-performance pump that works in the severest conditions.Built in Flexibility allows a wide rangeof applications
FlowMaster™
Hydraulic PumpRotary-Driven, Powerful and Versatile
The compact FlowMaster is versatilebecause its unique rotary drive andcontrol manifold let users adjust thepump to fit their applications exactly.Extreme temperatures won’t stop thepump. It has passed rigorous test inboth arctic and desert conditions.
The pump works well with high-visco-sity grease (NLGI 2 and above) at lowtemperatures because it’s pump tubehas a special pre-charge chamber and areciprocating cylinder designed toallow better priming. An inlet ballcheck reciprocates with the pump
cylinder allowing better grease flow tothe pump chamber.The FlowMaster’s impressive outputrange make it ideal for small mobileequipment with low lubricant require-ments to machinery with the highestlubricant demands.
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲▲
▲▲
242291
32
B
A
3/8 NPTFTank Port return
▲
3/8 NPTFInlet Port 1/4 NPTF
Pump Outlets
PressureGauge
231
117
▲
▲ 383
▲
▲
B
▲
▲
A
▲
▲496
Available Models
Model Description Dimension A Dimension B
(mm) (mm)
85487 60 lb. pump assembly for Centro-Matic Systems 505 743
86258 60 lb. pump assembly with low level and 505 743
follower plate for Centro-Matic Systems
85491 60 lb. drum pump assembly with low level 505 743
and follower plate for Progressive Systems
85482 Pump for 400 lb. drum (55 gallon/200 l) 864 1113
85480 Pump for 120 lb. drum (18 gallon) 699 948
85481 Pump for 60 lb. canister (8 gallon) 483 732
85483 Pump for 35 lb. pail (5 gallon) 348 597
252725 Follower plate for 35 lb. unit — —
85489 Follower plate for 60 lb. unit — —
Pump Performance and Specifications
Supply inlet hydr. pressure, max. 200 bar
Operating inlet hydr. pressure 20 to 32 bar
Hydraulic inlet flow Up to 28 l/min
Pump ratio with manifold 9:1 at low inlet pressure (20 to
25 bar) and low inlet flow
(below 7 lpm) pump ratio
approaches 11:1 ratio at higher
inlet pressure and flow
Operating temperature -10° to +65°C
Operating voltage (electric switch) 24 VDC
Output 115 – 735 cm3/min.
Max. hydraulic fluid temp. 55°C
Weight of Pump only 16 kg
Dimensions of pumps Dimensions of pump assemblies
A New Generationof Lubrication Pumps
Heinrich-Hertz-Straße 2-8D-69190 WalldorfGermany
Telefon +49.6227.33.0Fax +49.6227.33.259www.lincolnindustrial.com
Form W-102-A-0500© Copyright 2000 Printed in Germany Pr
inte
d on
100
% R
ecyc
ling
Pape
r.