Flower Pot Stand

8/12/2019 Flower Pot Stand

1/44

Project: Flower pot stand Page 1 of 44

Flower pot stand plan

www.craftsmanspace.com
http://project%20from%20http//www.craftsmanspace.com


2/44


()



3/44

ProjFlower pot stand parts list Front view



4/44

ProjBack view



5/44




6/44

Proj

Flower pot stand assembly drawings



7/44

Proj



8/44

Proj



9/44

Proj



10/44

Proje



11/44

Proje



12/44

Proje



13/44


14/44

Proje



15/44

Proje



16/44


17/44

Proje



18/44

Proje



19/44

Proje



20/44

Proje



21/44

Proje



22/44

Proje



23/44

Proje



24/44

Proje



25/44

Proje



26/44


27/44

Proje

Flower pot stand standard parts



28/44

Proje

Low shelf - screw position and pilot holes dimension



29/44

Proje

Middle shelf - screw position and pilot holes dimension



30/44

Proje

Top shelf - screw position and pilot holes dimension



31/44

Proje

Rest screws position and pilot holes dimension



32/44

Proje



33/44

Proje



34/44

Proje



35/44

Proje



36/44

Proje



37/44


Flower pot stand assemblage instructions

1. Arrange the Front Supports (part 4), Auxiliary Support low shelf (part 21), Auxiliary Support middle shelf(part 16) and the Auxiliary Support top shelf (part 10) on the Front leg (part 2) by following 2D documentation.

Fasten these parts together with vises, drill pilot holes and screw the Woodscrews D5 x 35mm (part 23) and

Woodscrews D6 x 60mm (part 5) in it.



38/44


39/44


2. Fasten together the subassemblies made in previous step following 2D documentation and then install the Board 1 middle shelf (part 14), the Board 2 middle shelf (part 15), the Board 1 low shelf (part 19) and the Board 2

low shelf (part 20) between them by using Woodscrews D4 x 45mm (Part 12). Of course, do not forget to drill

pilot holes before this step.



40/44


41/44


4. Lean the Back Legs (part 1) on the backside of the subassembly made in the previous step, drill the pilot holesand fasten them with Wood screws D5 x 35 (part 23).



42/44


5. Fix the Board 1 middle shelf (part 14), the Board 2 middle shelf (part 15), the Board 1 low shelf (part 19)and the Board 2 low shelf (part 20) to the subassembly made in the previous step by using Woodscrews D4 x

45mm (Part 12), but drill the pilot holes first.



43/44


6. Fix the Board 1 top shelf (part 7), the Board 2 top shelf (part 8) and the Board 3 top shelf (part 9) to thesubassembly made in previous step with Woodscrews D4 x 45mm (Part 12). Before this step, be sure to drill

pilot holes.



44/44


Flower Pot Stand

Documents

Transcript of Flower Pot Stand