Floriani Stabilizer Quick Reference Guide · 2017-11-06 · •Floriani No Show Nylon Mesh Fusible...

2
• Floriani Heat N Sta Tearaway • Floriani Medium Tearaway • Floriani Dream Weave Ultra *If the design is large, overly dense or poorly digized, prep the fabric first with Dream Weave Ultra and then float one layer of Floriani Medium Tearaway under the hoop to support the excess stches in addion to the Heat N Sta Tearaway. Woven Coon (Quilng, Muslin), Baste, Denim (shirt weight) Linen, Broadcloth, etc. Solid and Dense • Floriani Stch N Wash Fusible *If the design is large, overly dense or poorly digized, float one or two layers of Floriani Stch N Wash (non-fusible) Tearaway under the hoop to support the excess stches. Woven Coon (Quilng, Muslin), Baste, Denim, Linen, Broadcloth, etc. Open, Airy, No Outline, San Stch Monogram, San Stch Appliqué Silk, Silk Dupioni, San, Taffeta Solid and Dense • Floriani Dream Weave • Floriani Heat N Sta Tearaway *Fuse Dream Weave (or Dream Weave Ultra) to prep the fabric and then proceed with stabilizing with Heat N Sta Tearaway. *If the design is large, overly dense or poorly digized, float one or two layers of Floriani Medium Tearaway under the hoop to support the excess stches. Silk, Silk Dupioni, San, Taffeta, Lamè Open, Airy, No Outline, San Stch Monogram, San Stch Appliqué • Floriani Dream Weave • Floriani Stch N Wash Fusible *Fuse Dream Weave on first to prep the fabric and then proceed with stabilizing with Stch N Wash Fusible Tearaway. *If the design is large, overly dense or poorly digized, float one or two layers of Floriani Stch N Wash (non-fusible Tearaway under the hoop to support the excess stches. Towel, Terry Cloth All Designs Base Stabilizer: • Floriani Wet N Sck or • Floriani Perfect Sck Topping: • Heat N Gone *If the design is large, overly dense or poorly digized, float one or two layers of Floriani Medium Tearaway under the hoop to support the excess stches. Velvet, Velour, Sport Suede All Designs • Floriani Perfect Sck • Floriani Heat N Gone Topping *If the design is overly dense, fuse one layer of Floriani Dream Weave Ultra to the back of the fabric to prep it for the embroidery. Polar Fleece, Meinke All Designs Any Floriani “sck to” products: • Floriani Perfect Sck • Floriani Wet N Sck • Floriani Wet N Gone Tacky (use this product when no stabilizer can be leſt behind) *Use Floriani Water Soluble or Wet N Gone as a Topping. Fabric Type Design Type Stabilizer Recommended Floriani Stabilizer Quick Reference Guide

Transcript of Floriani Stabilizer Quick Reference Guide · 2017-11-06 · •Floriani No Show Nylon Mesh Fusible...

Page 1: Floriani Stabilizer Quick Reference Guide · 2017-11-06 · •Floriani No Show Nylon Mesh Fusible • Floriani Heat N Gone or •Water Soluble Topping *If the design is large, overly

• Floriani Heat N Sta Tearaway• Floriani Medium Tearaway• Floriani Dream Weave Ultra

*If the design is large, overly dense or poorly digitized, prepthe fabric first with Dream Weave Ultra and then float one layer of Floriani Medium Tearaway under the hoop to support the excess stitches in addition to the Heat N Sta Tearaway.

Woven Cotton (Quilting, Muslin), Batiste, Denim (shirt weight) Linen, Broadcloth, etc.

Solid and Dense

• Floriani Stitch N Wash Fusible

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Stitch N Wash (non-fusible) Tearaway under the hoop to support the excess stitches.

Woven Cotton (Quilting, Muslin), Batiste, Denim, Linen, Broadcloth, etc.

Open, Airy, No Outline, Satin Stitch Monogram, Satin Stitch Appliqué

Silk, Silk Dupioni, Satin, Taffeta Solid and Dense • Floriani Dream Weave• Floriani Heat N Sta Tearaway

*Fuse Dream Weave (or Dream Weave Ultra) to prep the fabricand then proceed with stabilizing with Heat N Sta Tearaway.

*If the design is large, overly dense or poorly digitized,float one or two layers of Floriani Medium Tearaway under the hoop to support the excess stitches.

Silk, Silk Dupioni, Satin, Taffeta, Lamè

Open, Airy, No Outline, Satin Stitch Monogram, Satin Stitch Appliqué

• Floriani Dream Weave• Floriani Stitch N Wash Fusible

*Fuse Dream Weave on first to prep the fabric and thenproceed with stabilizing with Stitch N Wash Fusible Tearaway.

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Stitch N Wash (non-fusible Tearaway under the hoop to support the excess stitches.

Towel, Terry Cloth All Designs Base Stabilizer: • Floriani Wet N Stick or• Floriani Perfect StickTopping: • Heat N Gone

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Medium Tearaway under the hoop to support the excess stitches.

Velvet, Velour, Sport Suede All Designs • Floriani Perfect Stick• Floriani Heat N Gone Topping*If the design is overly dense, fuse one layer of FlorianiDream Weave Ultra to the back of the fabric to prep it for the embroidery.

Polar Fleece, Meinke All Designs Any Floriani “stick to” products: • Floriani Perfect Stick• Floriani Wet N Stick• Floriani Wet N Gone Tacky (use this product when nostabilizer can be left behind) *Use Floriani Water Soluble or Wet N Gone as a Topping.

Fabric Type Design Type Stabilizer Recommended

Floriani Stabilizer Quick Reference Guide

Page 2: Floriani Stabilizer Quick Reference Guide · 2017-11-06 · •Floriani No Show Nylon Mesh Fusible • Floriani Heat N Gone or •Water Soluble Topping *If the design is large, overly

• Floriani No Show Nylon Mesh Fusible• Floriani Heat N Gone or• Water Soluble Topping

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Medium Tearaway under the hoop to support the excess stitches.

Knit – Tshirt, Pique, Sweatshirt, etc

Light*8,000 stitches or less

• Floriani Cutaway Medium Fusible• Floriani Heat N Gone or• Water Soluble Topping

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Medium Tearaway under the hoop to support the excess stitches.

Knit – Tshirt, Pique, Sweatshirt, etc

Medium to Heavy

Children’s Knit, Baby Onesie Medium • Floriani No Show Nylon Mesh Fusible• Wet N Gone Tacky• Floriani Heat N Gone• Water Soluble Topping

*Fuse No Show Nylon Mesh first to create non-stretch in fabricand then stick down to Perfect Stick or Wet N Gone Tacky.

Sweater Knit All Designs • Floriani No Show Nylon Mesh Fusible and• Floriani Perfect Stick Cutaway• Floriani Heat N Gone or• Water Soluble Topping

*Fuse No Show Nylon Mesh first to create non-stretch in fabricand then stick down to Wet N Stick Cutaway.

Cotton Organdy, English Netting, Sheer/See through fabric that can be ironed

Light • Floriani Wet N Gone Fusible

Wool, Wool Blend, Flannel All Designs • Floriani Heat N Sta Tearaway• Heat N Gone Topping

*If the design is large, overly dense or poorly digitized, floatone or two layers of Floriani Medium Tearaway under the hoop to support the excess stitches.

Hard to Hoop Fabrics and Items – Handkerchief, Collar, Socks, Ties, Backpack, Handbags, Pocket Top, Cuffs, Shirt Placket, Fabrics that are prone to HoopBurn, Corners

All Designs Choice of “stick to” products: • Floriani Perfect Stick• Floriani Wet N Stick• Floriani Wet N Gone Tacky (use this product when nostabilizer needs to be left behind)

Nylon Organdy/Organza, Tulle or Netting, Sheer/See through fabric that cannot be ironed

Light • Floriani Wet N Gone Tacky

Hard to Hoop Fabrics that can be perforated by needle: Leather, Pleather, Ultra-Suede, Oil Cloth

All Designs • Floriani Perfect Stick Cutaway

X

Fabric Type Design Type Stabilizer Recommended