Flexsim Ex. No.2 Tutorial
4
FlexSim / Ex. No.2 Step 1 First build the model and make connections as below for the given problem. Step 2 Complete the below entries for the Source 1 object. To create a Global Table
-
Upload
myles-oliver -
Category
Documents
-
view
220 -
download
2
description
simulation lab questions
Transcript of Flexsim Ex. No.2 Tutorial
FlexSim / Ex. No.2
Step 1 First build the model and make connections as below for the given problem.
Step 2 Complete the below entries for the Source 1 object.
To create a Global Table
Step 3 Complete the below entries for the Queue2 object.
Step 4 Complete the below entries for the Processor8 object.
Step 5Set the Label value for the fresh parts.
Step 6Change Label value by using trigger for the rework parts on the conveyor entry.
Step 7For giving priority to the rework parts at Queue2.
Step 8
Set the above properties to all other processor.
Step 9 Set the conveyor movement as the rework part goes to queue2.
Note:
* Global table name = ab
* Initial Label No. = 0.00
* Label Name = p