High Performance, Low Hassle Cummins Filtration introduces a replacement drop-in disposable rotor solution for centrifuges in Eliminators™ and remote centrifuge units used in High Horsepower applications.

The new CS41018/CS41019 replaces 84 pieces with a single, disposable assembly. This new disposable rotor using our patented SpiraTec technology offers easier maintenance and considerable cost savings without any compromise in fi ltration performance.

Fleetguard Centrifuge Rotor Application Info

Fleetguard Rotor Part Number

Cummins Engine Applications

Eliminator™ CompatibleRotor/Element

Cross ReferencesRemote Mount Housings

CS41018Cummins QST30, QSK38, QSK45, QSK50, QSK60,

QSK95* (requires 2 units)Yes

Cummins 4331734, Alfa Laval 1800-17767

Fleetguard CH44105, CH44120, Mann + Hummel Spinner II-200,

FM200, GL200

CS41019 Cummins QSK78 only YesCummins 3649569,

Alfa Laval 0565933-04Not Applicable

Fleetguard CS41018/CS41019 with SpiraTec™ Drop-In Lube CentrifugeA SMARTER SOLUTION FOR CUMMINS ENGINES

Benefi ts of the Fleetguard CS41018/CS41019 Lube Centrifuge

Meets OEM specifi cations, meaning premium protection and optimal performance for your engine

Minimum service life of 1,000 hours

Designed to allow for quick fi lter changes without any special tools. Reduces service time from 1.5-2 hours to approximately 15-20 minutes

Less risk of injury during rotor service

Quick and clean service improves total cost of ownership

cumminsfi ltration.comLT36319 -Rev 4, ©2015 Cummins Filtration Inc., Printed in USA

For more information, please contact us at:

1-800-22-FILTER or cumminsfi ltration.com

Conventional Unit Metal cone stack with 84 individual components

High cost

Diffi cult cleaning process required for reuse

Safety concerns with handling metal cones

Fleetguard CS41018/CS41019

All-in-one component

Low cost

Single use and environmentally

friendly disposable

Much safer design with composite shell and no

handling of sharp edges

Annual Cost of Ownership

Fleetguard® CS41018/CS41019Disposable Drop-In Rotor

Conventional Cleanable Rotor with 1000 hr

Replacement Interval

$0 $200 $400 $600 $800 $1000 $1200 $1400

Up to 44% Cost Savings

Designed to Save Time and Money Servicing the OE product is not only messy, but it can take up to 2 hours to complete the required cleaning and re-install the unit. The Fleetguard CS41018/CS41019 unit has been designed to greatly reduce the costs associated with labor and downtime—average installation takes as few as 20 minutes! Field trials resulted in a total annual cost savings of 44% versus the conventional OE product.

https://www.youtube.com/watch?v=cMPNFe9CK7Q

Best Warranty in the Business.The Cummins Filtration Warranty extends to our entire line of products, ensuring the same promise of performance and coverage beyond the competition. Visit cumminsfi ltration.com to learn more about the competitive benefi ts of the Cummins Filtration Warranty.

Removes soot and

contaminant to help

maintain oil quality