FLAT LENS LED LUMINAIREREVISED:NOVEMBER 2020NL ......FLAT LENS LED LUMINAIRE REVISED: NOVEMBER 2020...

AutoCAD SHX TextDIRECT/INDIRECT LED LUMINAIRE

AutoCAD SHX TextREVISED:

AutoCAD SHX TextNOVEMBER 2020

AutoCAD SHX TextNL-1

AutoCAD SHX TextLIGHTING PLATE:

AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR DIE CAST ALUMINUM. SIZE SHOWN AS HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR DIE CAST ALUMINUM. SIZE SHOWN AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS WITH DIE FORMED COLD ROLLED OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS WITH DIE FORMED COLD ROLLED SHEET STEEL REFLECTORS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 100 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. DLC CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, VARIOUS SIZE AND OUTPUT OPTIONS, SURFACE-MOUNTING KIT.

AutoCAD SHX TextNOTE: THIS SKETCH IS A NON-PROPRIETARY GRAPHIC REPRESENTATION OF A LUMINAIRE THAT MAY MEET THE THIS SKETCH IS A NON-PROPRIETARY GRAPHIC REPRESENTATION OF A LUMINAIRE THAT MAY MEET THE SPECIFICATION REQUIREMENTS. IT IS NOT INTENDED TO INDICATE A CERTAIN MANUFACTURER OR PREFERENCE.

AutoCAD SHX TextFLAT LENS LED LUMINAIRE





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - DIE-FORMED, COLD ROLLED STEEL. SIZE AS INDICATED IN LUMINAIRE HOUSING - DIE-FORMED, COLD ROLLED STEEL. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE SCHEDULE. OPTICS - ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE SCHEDULE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 100 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. 7. OPTIONS - EDGE-LIT LENS, PRISMATIC LENS. EMERGENCY BATTERY BACK-UP, INTEGRAL OPTIONS - EDGE-LIT LENS, PRISMATIC LENS. EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, VARIOUS SIZE AND OUTPUT OPTIONS, SURFACE-MOUNTING KIT.


AutoCAD SHX TextSURFACE LED WRAPAROUND





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - DIE-FORMED, COLD ROLLED STEEL, WITH REINFORCEMENT RIBS FOR RIGIDITY; HOUSING - DIE-FORMED, COLD ROLLED STEEL, WITH REINFORCEMENT RIBS FOR RIGIDITY; ENDCAPS SAME MATERIAL AS HOUSING, SECURED TABS, SCREWS, OR RIVETS. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE SCHEDULE. OPTICS - ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE SCHEDULE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 110 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - SURFACE MOUNTED. MOUNTING - SURFACE MOUNTED. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, VARIOUS SIZE AND OUTPUT OPTIONS.


AutoCAD SHX TextLINEAR LED SLOT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HEAVY GAUGE COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST HOUSING - HEAVY GAUGE COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST ALUMINUM BODY. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS. LAMBERTIAN, NARROW, WIDE, OR OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS. LAMBERTIAN, NARROW, WIDE, OR ASYMMETRIC LIGHT DISTRIBUTION AS INDICATED IN LUMINAIRE SCHEDULE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON-OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE, OR RECESSED IN HARD OR ACOUSTICAL TILE CEILING. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, AND VARIOUS CLEAR OR FROSTED POLYCARBONATE LENSES, BAFFLES, OR LOUVERS.


AutoCAD SHX TextROUND LED LUMINAIRE





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD ROLLED OR SPUN STEEL, DIE CAST ALUMINUM, OR BRASS BODY. SIZE HOUSING - COLD ROLLED OR SPUN STEEL, DIE CAST ALUMINUM, OR BRASS BODY. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE OPTICS - FROSTED ACRYLIC OR POLYCARBONATE LENS AS INDICATED IN LUMINAIRE SCHEDULE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 70 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE, OR RECESSED IN HARD OR ACOUSTICAL TILE CEILING. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS DIMENSIONS, VARIOUS MOUNTING OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS DIMENSIONS, VARIOUS MOUNTING OPTIONS, AND VARIOUS CLEAR OR FROSTED LENSES. ALSO AVAILABLE WITH INDIRECT LIGHTING ELEMENT WHEN SUSPENDED.


AutoCAD SHX TextDIRECT/INDIRECT LED PENDANT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - DIE CAST ALUMINUM FRAME AND HEAT SINK WITH ENAMELED FINISH. SIZE AS HOUSING - DIE CAST ALUMINUM FRAME AND HEAT SINK WITH ENAMELED FINISH. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - ACRYLIC OR POLYCARBONATE REFRACTIVE LENS. EDGE-LIT, LAMBERTIAN, OPTICS - ACRYLIC OR POLYCARBONATE REFRACTIVE LENS. EDGE-LIT, LAMBERTIAN, NARROW, WIDE, OR ASYMMETRIC LIGHT DISTRIBUTION AS INDICATED IN LUMINAIRE SCHEDULE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 75 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON-OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. INTEGRAL TO LUMINAIRE OR REMOTE-LOCATED IN ACCESSIBLE LOCATION. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT OR STEM MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. MOUNTING - PENDANT OR STEM MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS PROFILE DIMENSIONS AND RUN OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, AND VARIOUS CLEAR OR FROSTED POLYCARBONATE LENSES, BAFFLES, OR LOUVERS.


AutoCAD SHX TextDIRECT WALL-MOUNTED LINEAR





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST ALUMINUM BODY HOUSING - COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST ALUMINUM BODY WITH DIE CAST END CAPS AND STAINLESS STEEL HARDWARE. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 85 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - WALL SURFACE MOUNTED MOUNTING - WALL SURFACE MOUNTED 7. OPTIONS - EMERGENCY BATTERY BACK-UP, AND VARIOUS PROFILE DIMENSIONS AND RUN OPTIONS - EMERGENCY BATTERY BACK-UP, AND VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS. ALSO AVAILABLE WITH INDIRECT LIGHTING ELEMENT.


AutoCAD SHX TextINDIRECT WALL MOUNT




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST ALUMINUM BODY HOUSING - COLD ROLLED STEEL, EXTRUDED ALUMINUM, OR DIE CAST ALUMINUM BODY WITH STAINLESS STEEL HARDWARE. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - WALL SURFACE MOUNTED. MOUNTING - WALL SURFACE MOUNTED. 7. OPTIONS - VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, AND OPTIONAL CLEAR OPTIONS - VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, AND OPTIONAL CLEAR ACYLIC OR POLYCARBONATE LENS.



AutoCAD SHX TextRECESSED LINEAR WALL WASH





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD ROLLED STEEL OR EXTRUDED ALUMINUM BODY WITH STAINLESS STEEL HOUSING - COLD ROLLED STEEL OR EXTRUDED ALUMINUM BODY WITH STAINLESS STEEL HARDWARE. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. OPTICS - REFRACTIVE LENS OPTIMIZED FOR ASYMMETRIC DISTRIBUTION. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 70 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. 7. OPTIONS - VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS.OPTIONS - VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS.


AutoCAD SHX TextINDIRECT COVE LIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - FABRICATED METAL HOUSING WITH POWDER COAT FINISH. LENGTH AS HOUSING - FABRICATED METAL HOUSING WITH POWDER COAT FINISH. LENGTH AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - CLEAR OR FROSTED ACRYLIC LENS. OPTICS - CLEAR OR FROSTED ACRYLIC LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - END-TO-END CONNECTIONS, SUITABLE FOR SURFACE MOUNT. MOUNTING - END-TO-END CONNECTIONS, SUITABLE FOR SURFACE MOUNT. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS PROFILE DIMENSIONS AND RUN OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, VARIOUS CLEAR OR FROSTED POLYCARBONATE LENSES, AND OPTIONAL SPECULAR REFLECTOR WITH 60-DEGREE to 120-DEGREE BEAM ANGLE. OPTIONAL FIELD-ADJUSTABLE AIMING.


AutoCAD SHX TextADJUSTABLE RECESSED DOWNLIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK AND FIELD HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK AND FIELD AIMING CAPABILITY. APERTURE SIZE AND SHAPE AS INDICATED IN LUMINAIRE SCHEDULE. 2. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 70 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 3. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 4. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 5. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS FOR INSTALLATION IN ACOUSTICAL TILE CEILINGS OR TABS WHEN MOUNTING IN HARD CEILINGS. 6. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE LENSES, REFLECTORS, LOUVERS, AND TRIMS. VARIOUS BEAM ANGLES. IC-RATED HOUSING.


AutoCAD SHX TextFIXED RECESSED DOWNLIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK. APERTURE HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK. APERTURE SIZE AND SHAPE AS INDICATED IN LUMINAIRE SCHEDULE. 2. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 70 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 3. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 4. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 5. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS FOR INSTALLATION IN ACOUSTICAL TILE CEILINGS OR TABS WHEN MOUNTING IN HARD CEILINGS. 6. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE LENSES, REFLECTORS, LOUVERS AND TRIMS. VARIOUS BEAM ANGLES. IC RATED HOUSING.


AutoCAD SHX TextWALLWASH RECESSED DOWNLIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK. APERTURE HOUSING - COLD-ROLLED STEEL OR DIE CAST ALUMINUM, WITH HEAT SINK. APERTURE SIZE AND SHAPE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - WALL WASH REFLECTOR OR LENS OPTIMIZED FOR WALL WASH APPLICATION. OPTICS - WALL WASH REFLECTOR OR LENS OPTIMIZED FOR WALL WASH APPLICATION. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 60 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS MOUNTING - RECESSED IN HARD OR ACOUSTICAL TILE CEILING. PROVIDE T-BAR HANGERS FOR INSTALLATION IN ACOUSTICAL TILE CEILINGS OR TABS WHEN MOUNTING IN HARD CEILINGS. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE OPTIONS - EMERGENCY BATTERY BACK-UP, VARIOUS ACRYLIC OR POLYCARBONATE LENSES, REFLECTORS, LOUVERS AND TRIMS. IC RATED HOUSING.





AutoCAD SHX TextLUMINAIRE PLATE:

AutoCAD SHX TextLED TRACK LIGHTING

AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - EXTRUDED ALUMINUM HOUSING SUITABLE FOR CEILING-MOUNTED TRACK HOUSING - EXTRUDED ALUMINUM HOUSING SUITABLE FOR CEILING-MOUNTED TRACK SYSTEMS. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - GLASS LENS OR FILTER, ACRYLIC OR CAST ALUMINUM REFLECTOR. OPTICS - GLASS LENS OR FILTER, ACRYLIC OR CAST ALUMINUM REFLECTOR. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 90 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 90 CRI UON, AND MINIMUM EFFICACY OF 50 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MIINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE.. 5. CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - TRACK SYSTEM SUITABLE FOR MOUNTING TO CEILINGS AND/OR WALLS. MOUNTING - TRACK SYSTEM SUITABLE FOR MOUNTING TO CEILINGS AND/OR WALLS. 7. OPTIONS - BAFFLE, HONEYCOMB LOUVER, VARIOUS ACRYLIC OR POLYCARBONATE LENSES.OPTIONS - BAFFLE, HONEYCOMB LOUVER, VARIOUS ACRYLIC OR POLYCARBONATE LENSES.






AutoCAD SHX TextLED UNDERCABINET LIGHT

AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - EXTRUDED ALUMINUM OR WELDED STEEL HOUSING. LENGTH AS INDICATED IN HOUSING - EXTRUDED ALUMINUM OR WELDED STEEL HOUSING. LENGTH AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - DIFFUSE ACRYLIC OR POLYCARBONATE LENS. OPTICS - DIFFUSE ACRYLIC OR POLYCARBONATE LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 60 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - OCCUPANCY SENSOR, PROFILE DIMENSIONS AND RUN LENGTHS, INTEGRAL OPTIONS - OCCUPANCY SENSOR, PROFILE DIMENSIONS AND RUN LENGTHS, INTEGRAL ROCKER SWITCH, END-TO-END CONNECTIONS, AND CLEAR OR FROSTED POLYCARBONATE LENSES.


AutoCAD SHX TextLED ROUND CEILING SURFACE MOUNT




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - ALUMINUM OR STAINLESS STEEL HOUSING. SIZE AS INDICATED IN LUMINAIRE HOUSING - ALUMINUM OR STAINLESS STEEL HOUSING. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - MATTE ACRYLIC OR POLYCARBONATE DIFFUSER. OPTICS - MATTE ACRYLIC OR POLYCARBONATE DIFFUSER. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 55 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - SIZE, SHAPE, AND LUMEN OUTPUT. OPTIONS - SIZE, SHAPE, AND LUMEN OUTPUT.



AutoCAD SHX TextLED DECORATIVE ACCENT PENDANT




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - ALUMINUM STAINLESS STEEL HOUSING. HOUSING - ALUMINUM STAINLESS STEEL HOUSING. 2. OPTICS - GLASS OR ACRYLIC SHADE. OPTICS - GLASS OR ACRYLIC SHADE. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 40 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - AIRCRAFT CABLE OR STEM WITH CANOPY. MOUNTING - AIRCRAFT CABLE OR STEM WITH CANOPY. 7. OPTIONS - SHAPE AND STYLE, LENSES, AND FIELD-ADJUSTABLE CABLE. OPTIONS - SHAPE AND STYLE, LENSES, AND FIELD-ADJUSTABLE CABLE.



AutoCAD SHX TextLED DECORATIVE WALL SCONCE




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - FABRIC, GLASS, OR OTHER SHADE WITH STAINLESS STEEL HOUSING. HOUSING - FABRIC, GLASS, OR OTHER SHADE WITH STAINLESS STEEL HOUSING. 2. OPTICS - DIFFUSE LENS. OPTICS - DIFFUSE LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 50 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT, COMPLIES WITH IES CERTIFICATION - UL LISTED FOR DRY LOCATION, ROHS COMPLIANT, COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - VARIOUS PROFILES, SHAPES, AND SHADES. OPTIONS - VARIOUS PROFILES, SHAPES, AND SHADES.



AutoCAD SHX TextLED UP/DOWN WALL SCONCE




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - ALUMINUM OR STAINLESS STEEL HOUSING. HOUSING - ALUMINUM OR STAINLESS STEEL HOUSING. 2. OPTICS - DIFFUSE ACRYLIC LENS. OPTICS - DIFFUSE ACRYLIC LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 90 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 90 CRI UON, AND MINIMUM EFFICACY OF 80 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES CERTIFICATION - UL LISTED FOR DRY OR DAMP LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. MOUNTING - SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - VARIOUS PROFILES AND SHAPES. OPTIONS - VARIOUS PROFILES AND SHAPES.



AutoCAD SHX TextLED FOOD SERVICE LIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR DIE CAST ALUMINUM. STAINLESS HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR DIE CAST ALUMINUM. STAINLESS STEEL FASTENERS. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - POLYCARBONATE OR GLASS LENS. OPTICS - POLYCARBONATE OR GLASS LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT, DLC QUALIFIED. CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. NSF CERTIFIED. 6. MOUNTING - RECESSED IN HARD CEILING OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING - RECESSED IN HARD CEILING OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, OPTIONS - EMERGENCY BATTERY BACK-UP, INTEGRAL OCCUPANCY/VACANCY SENSOR, VARIOUS SIZE AND OUTPUT OPTIONS.




AutoCAD SHX TextLUMINAIRE PLATE:

AutoCAD SHX TextLED HIGH ABUSE LIGHT

AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HIGH-IMPACT RESISTANT, FULLY GASKETED HOUSING CONSTRUCTED OF HOUSING - HIGH-IMPACT RESISTANT, FULLY GASKETED HOUSING CONSTRUCTED OF STAINLESS STEEL, HEAVY-DUTY DIE CAST ALUMINUM, OR POLYCARBONATE. TAMPER-RESISTANT FASTENERS. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - UV-STABILIZED, IMPACT-RESISTANT, FROSTED POLYCARBONATE LENS. OPTICS - UV-STABILIZED, IMPACT-RESISTANT, FROSTED POLYCARBONATE LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 100 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT. COMPLIES WITH IES CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - CEILING OR WALL SURFACE-MOUNTED. MOUNTING - CEILING OR WALL SURFACE-MOUNTED. 7. OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP.OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP.



AutoCAD SHX TextLED HAZARDOUS LOCATION LIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HIGH-IMPACT RESISTANT, FULLY GASKETED HOUSING CONSTRUCTED OF HOUSING - HIGH-IMPACT RESISTANT, FULLY GASKETED HOUSING CONSTRUCTED OF STAINLESS STEEL OR HEAVY-DUTY DIE CAST ALUMINUM. SIZE AS INDICATED IN LUMINAIRE SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - UV-STABILIZED, HIGH-IMPACT, FROSTED POLYCARBONATE OR GLASS LENS. OPTICS - UV-STABILIZED, HIGH-IMPACT, FROSTED POLYCARBONATE OR GLASS LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 4000K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 4000K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT. DLC QUALIFIED. CERTIFICATION - UL LISTED FOR WET LOCATION, ROHS COMPLIANT. DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. MEETS UL844 REQUIREMENTS FOR CLASS 1 DIVISION 2 HAZARDOUS LOCATIONS. 6. MOUNTING - CEILING OR WALL SURFACE-MOUNTED. MOUNTING - CEILING OR WALL SURFACE-MOUNTED. 7. OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP.OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP.


AutoCAD SHX TextLED INDUSTRIAL LIGHT





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - EXTRUDED ALUMINUM OR WELDED STEEL HOUSING WITH SNAP-ON END CAPS. HOUSING - EXTRUDED ALUMINUM OR WELDED STEEL HOUSING WITH SNAP-ON END CAPS. SIZE AS INDICATED IN LUMINAIRE SCHEDULE. 2. OPTICS - DIFFUSE ACRYLIC LENS. OPTICS - DIFFUSE ACRYLIC LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 90 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. . 5. CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. DLC CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS PROFILE DIMENSIONS AND RUN LENGTHS, AND VARIOUS CLEAR OR FROSTED POLYCARBONATE LENSES.


AutoCAD SHX TextLED INDUSTRIAL HIGH-BAY





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR CAST ALUMINUM HOUSING. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR CAST ALUMINUM HOUSING. 2. OPTICS - POLYCARBONATE DIFFUSE LENS. OPTICS - POLYCARBONATE DIFFUSE LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 140 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. . 5. CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT, DLC CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT, DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS OPTICAL DISTRIBUTIONS.


AutoCAD SHX TextLED INDUSTRIAL LOW-BAY






AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR CAST ALUMINUM HOUSING. HOUSING - HEAVY GAUGE COLD ROLLED STEEL OR CAST ALUMINUM HOUSING. 2. OPTICS - UV-STABILIZED ACRYLIC OR POLYCARBONATE DIFFUSE LENS AND SPUN OPTICS - UV-STABILIZED ACRYLIC OR POLYCARBONATE DIFFUSE LENS AND SPUN ALUMINUM REFLECTOR. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 100 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM DRIVER - REPLACEABLE, INTEGRAL, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. 5. CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. DLC CERTIFICATION - UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. DLC QUALIFIED. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING MOUNTING - PENDANT, STEM, OR SURFACE MOUNTED WITH STAINLESS STEEL MOUNTING HARDWARE. 7. OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS OPTIONS - INTEGRAL OCCUPANCY SENSOR, EMERGENCY BATTERY BACK-UP, VARIOUS OPTICAL DISTRIBUTIONS.

AutoCAD SHX TextLED EMERGENCY LIGHTING UNIT (ELU)




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - HIGH-IMPACT, UV-STABILIZED, INJECTION-MOLDED THERMOPLASTIC HOUSING. HOUSING - HIGH-IMPACT, UV-STABILIZED, INJECTION-MOLDED THERMOPLASTIC HOUSING. 2. LIGHT SOURCE - SOLID STATE LEDS. LIGHT SOURCE - SOLID STATE LEDS. 3. DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. ON/OFF CONTROL AND BATTERY BACKUP INTEGRAL TO UNIT. 4. CERTIFICATION - NFPA 101. UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. CERTIFICATION - NFPA 101. UL LISTED FOR DAMP OR WET LOCATION, ROHS COMPLIANT. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 5. MOUNTING - WALL SURFACE MOUNTED. MOUNTING - WALL SURFACE MOUNTED. 6. OPTIONS - WHITE OR BLACK FINISH.OPTIONS - WHITE OR BLACK FINISH.



AutoCAD SHX TextEDGE-LIT EXIT SIGN





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - EXTRUDED ALUMINUM WITH CLEAR ACRYLIC EDGE-LIT PANEL. HOUSING - EXTRUDED ALUMINUM WITH CLEAR ACRYLIC EDGE-LIT PANEL. 2. LIGHT SOURCE - SOLID STATE LEDS. LIGHT SOURCE - SOLID STATE LEDS. 3. DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120-277V, THERMAL MANAGEMENT, AND < 20% THD. 4. CERTIFICATION - NFPA 101, UL LISTED FOR DAMP OR WET LOCATION, AND ROHS CERTIFICATION - NFPA 101, UL LISTED FOR DAMP OR WET LOCATION, AND ROHS COMPLIANT. 5. MOUNTING - SURFACE MOUNTED ON CEILING AND/OR WALL. MOUNTING - SURFACE MOUNTED ON CEILING AND/OR WALL. 6. OPTIONS - RED OR GREEN LETTERING, ONE- OR TWO-SIDED. BATTERY BACKUP.OPTIONS - RED OR GREEN LETTERING, ONE- OR TWO-SIDED. BATTERY BACKUP.


AutoCAD SHX TextEXIT SIGN





AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - DIE-CAST ALUMINUM OR HIGH-IMPACT, UV-STABILIZED, INJECTION-MOLDED HOUSING - DIE-CAST ALUMINUM OR HIGH-IMPACT, UV-STABILIZED, INJECTION-MOLDED THERMOPLASTIC. 2. LIGHT SOURCE - SOLID STATE LEDS. LIGHT SOURCE - SOLID STATE LEDS. 3. DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING DRIVER - INTEGRAL, HIGH-EFFICIENCY DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120/277V, THERMAL MANAGEMENT, AND < 20% THD. 4. CERTIFICATION - NFPA 101, UL LISTED FOR DAMP OR WET LOCATION, AND ROHS CERTIFICATION - NFPA 101, UL LISTED FOR DAMP OR WET LOCATION, AND ROHS COMPLIANT. 5. MOUNTING - SURFACE MOUNTED ON CEILING AND/OR WALL. MOUNTING - SURFACE MOUNTED ON CEILING AND/OR WALL. 6. OPTIONS - RED OR GREEN LETTERING, ONE- OR TWO-SIDED. ELU REMOTE HEAD OPTIONS - RED OR GREEN LETTERING, ONE- OR TWO-SIDED. ELU REMOTE HEAD CAPABILITIES. BATTERY BACKUP.


AutoCAD SHX TextLED NICHE POOL LUMINAIRE




AutoCAD SHX TextLUMINAIRE REQUIREMENTS: 1. HOUSING - STAINLESS STEEL MARINE GRADE CONSTRUCTION WITH CLEAR TEMPERED HOUSING - STAINLESS STEEL MARINE GRADE CONSTRUCTION WITH CLEAR TEMPERED GLASS. 2. OPTICS - TEMPERED GLASS OR BOROSILICATE LENS. OPTICS - TEMPERED GLASS OR BOROSILICATE LENS. 3. LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND LIGHT SOURCE - SOLID STATE LEDS, 3500K CCT UON, MINIMUM 80 CRI UON, AND MINIMUM EFFICACY OF 25 LUMENS/WATT UON. INITIAL LUMEN OUTPUT AS INDICATED IN LUMINAIRE SCHEDULE. 4. DRIVER - REPLACEABLE, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, DRIVER - REPLACEABLE, HIGH-EFFICIENCY DIMMABLE DRIVER WITH MINIMUM 0.9 PF, OPERATING VOLTAGE OF 120V OR 277V, THERMAL MANAGEMENT, AND < 20% THD. ON-OFF CONTROL AND FULLY DIMMABLE DOWN TO 10% MINIMUM OR AS INDICATED IN LUMINAIRE SCHEDULE. INTEGRAL TO LUMINAIRE OR REMOTE-LOCATED IN ACCESSIBLE LOCATION. 5. CERTIFICATION - UL LISTED FOR SUBMERSIBLE LOCATION. COMPLIES WITH IES LM79, CERTIFICATION - UL LISTED FOR SUBMERSIBLE LOCATION. COMPLIES WITH IES LM79, LM80 AND TM21 TESTING STANDARDS. 6. MOUNTING - ABS INSTALLATION HOUSING. MOUNTING - ABS INSTALLATION HOUSING. 7. OPTIONS - SHAPE AND SIZE.OPTIONS - SHAPE AND SIZE.



NL-1NL-1-1 To 1

NL-2NL-2-1 To 1

NL-3NL-3-1 To 1

NL-4NL-4-1 To 1

NL-5NL-5-1 To 1

NL-6NL-6-1 To 1

NL-7NL-7-1 To 1

NL-8NL-8-1 To 1

NL-9NL-9-1 To 1

NL-10NL-10-1 To 1

NL-11NL-11-1 To 1

NL-12NL-12-1 To 1

NL-13NL-13-1 To 1

NL-14NL-14-1 To 1

NL-15NL-15-1 To 1

NL-16NL-16-1 To 1

NL-17NL-17-1 To 1

NL-18NL-18-1 To 1

NL-19NL-19-1 To 1

NL-20NL-20-1 To 1

NL-21NL-21-1 To 1

NL-22NL-22-1 To 1

NL-23NL-23-1 To 1

NL-24NL-24-1 To 1

NL-25NL-25-1 To 1

NL-26NL-26-1 To 1

NL-27NL-27-1 To 1

NL-28NL-28-1 To 1

NL-29NL-29-1 To 1

FLAT LENS LED LUMINAIREREVISED:NOVEMBER 2020NL ......FLAT LENS LED LUMINAIRE REVISED: NOVEMBER 2020...

Documents

Transcript of FLAT LENS LED LUMINAIREREVISED:NOVEMBER 2020NL ......FLAT LENS LED LUMINAIRE REVISED: NOVEMBER 2020...