Flash Solutions

Industrial Grade Flash SolutionsFlashOverview

One of the most popular flash memory products in the world, STEC CompactFlash offers reliable, high-capacity storage that is compatible with CF Type I and Type II devices. Engineered for performance and reliability, these small, high speed cards are ideal for industrial and handheld applications.

Features• IC Tower® Chip Stacking Technology • CFA and PCMCIA compliant • Hot swappable • Low power consumption • Optional purge, password protection, write protection • ATA interface and True IDE mode support and life cycle management (LCM) feature available • 5 year warranty

STEC Secure Digital (SD) flash memory cards are small, removable and non-volatile flash memory with a high performance interface. Available in large capacities, STEC industrial grade SD cards are extremely reliable, durable and can handle extreme temperatures in a small space.

Features• Built-in error correction • Supports SD mode and SPI mode• Operating voltage: 2.7V to 3.6V • 2 million write/erase cycles • Two operating temperature range options • 5 year warranty • Compliant to SD memory card specifications V1.10

The STEC MMCplus offers high performance and storage capacity in a small form factor. The cards are fully compliant to the MMC standard. This means the cards are portable between thousands of today’s electronics, and are well supported in the electronics industry.

Features• Built in error correction • Compliant MMC card specification 4.0 • Supports SPI mode • Low power consumptions • Two operating temperature range options • 5 year warranty

Part #: SLCF(xxx)(M/G)M1U(I) SLCF(xxx)(M/G)M1T2U(I) xxx = Capacity M/G = MegaByte/GigaByte U: RoHS Compliant I = Industrial Temperature T2 = CompactFlash Type II

ex(A). SLCF512MM1U(I) = 512MB CompactFlash Card ex(B). SLCF16GM1T2U(I) = 16GB CompactFlash Card (Type II)

PRODUCT KEY

Part #: SLSD(xxx)B(I)U I = Industrial Temperature U = RoHS Compliant

ex. SLSD2GBB(I)U = 2GB Secure Digital Card

Part #: SLMMCP(xxx)A(I)U I = Industrial Temperature U = RoHS Compliant

ex. SLMMCP2GBA(I)U = 2GB MMCplus Card

PRODUCT KEY

PRODUCT KEY

Page 2/6

COMPACTFLASH

SECURE DIGITAL

MMCplus

CompactFlashSecure DigitalMMCplus

At STEC, our world-class Flash and DRAM products allow you to offer superior solutions to your markets. Whether you choose standard or custom solutions, STEC will meet your requirements to exact specifications.

USB PRODUCT KEY

STEC industrial grade ATA PC Cards are perfect alternatives to hard disk drives due to their high reliability and low cost per usable megabyte. ATA PC Cards are designed specifically for equipment requiring standard form factors and moderate capacities (up to 16GB), such as data recorders, avionics systems and several telecommunication applications.

Features• ATA and True IDE interfaces • Low power consumption • PCMCIA compliant • 2 million write/erase cycles • Hot swappable • 5 year warranty • Optional purge, password protection, write protection and life cycle management(LCM)

Single Chip DriveTM is a small form factor, solid-state flash disk with no moving parts. It is available in capacities from 128MB to 4GB, the highest in the industry, due to STEC’s patented IC Tower® Stacking Technology. The standard USB and IDE interface provides designers with a true plug-n-play storage device, allowing for short designing cycles and fast time to market.

High performance, high reliability and low cost per megabyte make Single Chip Drive the product of choice in embedded applications such as GPS, Thin Clients, Point-Of-Sales, Networking Equipment and Hand-Held Devices.

IDE/ATA Features• ATA-5 compatible • IC Tower® Stacking Technology• 2,000,000 write/erase cycles • ECC Engine: 5-bytes detection, 4-bytes correction • Life cycle management • 5 year warrantyUSB 2.0 Features• USB 2.0 high speed interface • IC Tower® Stacking Technology• Password protection • 2,000,000 write/erase cycles• 5 year warranty • ECC Engine: 5-bytes detection, 4-bytes correction

Part #: SLATA(xxx)(M/G)M1U(I)xxx = capacity M/G = Megabyte/Gigabyte U = RoHS Compliant I = industrial

ex. SLATA512MM1U(I) = 512MB ATA PC Card SLATA8GM1U(I) = 8GB ATA PC Card

PRODUCT KEY

Part #: SLISCDxxx(M/G)M1U(I)-y xxx = capacity M/G = Megabyte/Gigabyte U = RoHS Compliant I = industrial Y = A for Single Flash iSCD, B for Stacked Flash iSCD

Ex. SLISCD1GM1U-A = 1GB IDE Single Chip Drive, Commercial Temp, Form Factor A, Lead-Free SLISCD4GM1UI-B = 4GB IDE Single Chip Drive, Industrial Temp, Form Factor B, Lead-Free

Part #: SLUSCDxxx(M/G)U1U(I)-y xxx = capacity M/G = Megabyte/Gigabyte U = RoHS Compliant I = industrial Y = A for Single Flash uSCD, B for Stacked Flash uSCD

Ex. SLUSCD1GU1U-A = 1GB USB Single Chip Drive, Commercial Temp, Form Factor A, Lead-free SLUSCD4GU1U-B = 4GB USB Single Chip Drive, Industrial Temp, Form Factor B, Lead-free

IDE PRODUCT KEY

Page 3/6

ATA PC CARD

SINGLE CHIP DRIVE (SCD) - IDE OR USB

ATA PC CardSingle Chip Drive (SCD)

At STEC, our world-class Flash and DRAM products allow you to offer superior solutions to your markets. Whether you choose standard or custom solutions, STEC will meet your requirements to exact specifications.

USB PRODUCT KEY

STEC Flash Disk Modules provide non-volatile, solid-state storage for embedded applications. Built-in wear leveling algorithms, on-the-fly ECC, and over two million write/erase cycles give you superior data integrity and reliability.

IDE Features• ATA and True IDE interfaces • Low power consumption • 5 year warranty • Proven built-in power down protection • Optional purge, write protection, password protection • Industrial operating temperature ranges and life cycle management (LCM) features available

USB 2.0 Features• USB 2.0 high speed interface • IC Tower® Stacking Technology• Password protection • 2,000,000 write/erase cycles• 5 year warranty • ECC Engine: 5-bytes detection, 4-bytes correction

Part #: SLFDM(xx)(zzz)-(xxx)(M/G)M1U(I) xx = Pin xxx = Capacity M/G = Megabyte/Gigabyte U = RoHS Compliant I = Industrial Temperature z = IDE Connector Orientation: V (Vertical), H (Horizontal)

ex. SLFDM40H-512MM1U(I) = 512MB 40Pin Flash Disk Module (Horizontal) SLFDM44V-8GM1U(I) = 8GB 44Pin Flash Disk Module

Part #: SLUFDMxxx(M/G)U1U(I)-y xxx = Capacity M/G = Megabyte/Gigabyte U = RoHS Compliant I = Industrial Temperature y = Form Factor A (Horizontal), B (Low profile)

Ex. SLUFDM128MU1U-A = 128MB USB Flash Disk Module, Horizontal, Lead-Free, Commercial Temperature SLUFDM1GU1UI-B = 1GB USB Flash Disk Module, Low Profile, Lead-Free, Industrial Temperature

IDE PRODUCT KEY

Page 4/6

Flash Disk Module (FDM) - IDE or USB

Flash Disk Module (FDM) At STEC, our world-class Flash and DRAM products allow you to offer superior solutions to your markets. Whether you choose standard or custom solutions, STEC will meet your requirements to exact specifications.

128MB to 16GB

64MB to 2GB

64MB to 512MB

128MB to 4GB

128MB to 16GB

128MB to 8GB

Up to 10MB/sec

Up to 12MB/sec

Up to 11MB/sec

Up to 10MB/sec (IDE)to 14MB/sec (USB)

Up to 10MB/sec

Up to 10MB/sec (IDE)to 14MB/sec (USB)

ATA with True IDEmode support, MWDMA;50-pin CF Interface

SD 1-bit, 4-bit (only in 2.0 Spec) Interface

MMC4.1 1-bit, 4-bit, 8-bit Interface

IDE , MWDMA (IDE); USB 2.0

ATA with True IDE modesupport, MWDMA;68-pin PCMCIA Interface

IDE, MWDMA (IDE);USB 2.0

Any OS supportingstandard IDE

Any OS supportingSD/MMC/SPI interface

Any OS supportingSD/MMC/SPI interface

Any OS supportingstandard IDE, USB

Any OS supportingstandard IDE

Any OS supporting standard IDE and USB

Purge, life cycle management(LCM), password protection, and write protection features available

CID customization

CID customization

For IDE only: life cyclemanagement (LCM),

For USB: software write protection,unique serial number

Purge, life cycle management (LCM), password protection, andwrite protection features available

For IDE only: purge, life cyclemanagement (LCM), password protection, and write protectionfeatures available

For USB: software write protectionunique serial number

CompactFlash

Secure Digital

MultiMediaCard

Single Chip Drive

ATA PC Card

Flash Disk Module

Standard Specifications

Write/Erase Cycle • 2,000,000

ECC Engine • Up to 5 bytes detection, 4 bytes correction

NAND Flash • SLC

RoHS-Compliant • Yes

Operating Temperature Range • Commercial (0o to 70oC) ; Industrial (-40o to 85oC)

Warranty • 5 years

Value Added Services • Customized form factors and test solutions, custom firmware, software imaging, controlled BOM's, customer-specific labeling, and serialization

CapacitiesProduct Type SustainedRead/Write

Interface Operating SystemSupport

Optional Features

PRODUCT SPECIFICATIONS

Page 5/6

At STEC, our world-class Flash and DRAM products allow you to offer superior solutions to your markets. Whether you choose standard or custom solutions, STEC will meet your requirements to exact specifications.

CompactFlashSecure DigitalMMCplusATA PC CardSingle Chip Drive (SCD)Flash Disk Module (FDM)

OEMSOLUTIONSSTEC is a global leader in Solid State Flash Storage and Memory (DRAM) Solutions.

Established in 1997, STEC continues its success as a memory and storage solutions provider. Having grown into a publicly traded company (NASDAQ: STEC) with over 550 employees worldwide, STEC has an expansive product portfolio designed specifically for high performance OEM applications.

STEC has supported world-class OEMs for 15 years and is proud of customers such as Cisco, HP, IBM, Motorola, Nortel, Alcatel, Lucent, Huawei, Siemens, General Dynamics and Lockheed Martin. STEC products are designed for high performance and ultimate reliability in demanding environments where temperature, shock, vibration, and dust threaten the product. STEC also ensures long-term product availability and preeminent management of the supply chain.

With a significant patent portfolio, comprehensive controller offering and proprietary sub-system design capabilities, STEC supports a global manufacturing network with a US-based 50,000 square foot manufacturing facility. This ISO 14001 and 9001 certified facility implements cellular and demand flow manufacturing, and responds quickly to deliver custom designed memory and storage solutions. This makes STEC the first choice in development projects with increasingly shorter timetables. Many large companies and government contractors looking for easy design-ins, faster time to market, and smaller footprints use STEC memory and storage products.

STEC is committed to technological leadership through on-going R&D. By continuing to boost functionality, add advanced features, and improve reliability and performance, STEC consistently improves its memory and storage products. STEC overcomes difficult technical challenges and creates unique solutions to address the needs of major markets such as military, aerospace, medical, embedded, industrial, security and communications.

9001

Worldwide HeadquartersSTEC, Inc.3001 Daimler StreetSanta Ana, California 92705 USATel: (949) 476-1180Fax: (949) 476-1209Web: www.stec-inc.com

©2007 STEC, Inc. The STEC name, logo, and design are trademarks of STEC,Inc. All other trademarks are the property of their respective owners. Printed in USA. R2363 01/07

STEC Hong KongUnit 01-02, 10/F, 88 Hing Fat StreetCauseway Bay, Hong Kong Tel: +852-3150-8398 Fax: +852-3150-8399Web: www.stec-inc.cn

STEC EuropeDonau-City-Strasse 11220 Vienna, AustriaTel: +43-1-263-38-08 Fax: +43-1-263-37-65Web: www.stec-inc.com

STEC JapanYOKOHAMA, Landmark Tower20/F 2-2-1, Minato-Mirai, Nishi-kuYokohama, 220-8120, JapanTel: +045-670-7030Fax: +045-670-7001 Web: www.stec-inc.jp

STEC Taiwan4F, No. 3, Lane 91, Dongmei RoadHsinchu City, TaiwanTel: +886-3-5733233Fax: +886-3-5733633Web: www.stec-inc.com

Page 6/6