87

◆ Hoses / Automatic roller for oxygas hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

◆ Quick action coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 to 91

◆ Cutting nozzles and other fl ame accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

WELDING TOOLS AND ACCESSORIESWWWWWEEEEELLLLLDDDDDIIIIINNNNNGGGGG TTTTTOOOOOOOOOOLLLLLSSSSS AAAAANNNNNDDDDD AAAAACCCCCCCCCCEEEEESSSSSSSSSSOOOOORRRRRIIIIIEEEEESSSSSWELDING TOOLS AND ACCESSORIESWELDING TOOLS AND ACCESSORIES

F L A M E66

FLAM

E

89

HOSESHHHHHOOOOOSSSSSEEEEESSSSSHOSESHOSES

2012-

228

0876

-071_

ret

2011-

348

2011-

350

* Propylene excluded

Gas Ø (mm)

Maximumpressure (bar)

Coil length(m) To order

Acetylene 6.3 x 12 10 5 W000010055

Oxygen 6.3 x 12 10 5 W000010056

Acetylene 6.3 x 12 10 10 W000010081

Oxygen 6.3 x 12 10 10 W000010057

Acetylene 6.3 x 12 10 20 W000010058

Oxygen 6.3 x 12 10 20 W000010059

Acetylene 6.3 x 12 10 40 W000010060

Oxygen 6.3 x 12 10 40 W000010061

LPG* 6.3 x 12 10 20 W000010052

LPG* 6.3 x 12 10 40 W000010062

Single hoses

Twin hoses

Acetylene 10 x 16 20 10 W000010064

Oxygen 10 x 16 20 10 W000010065

Acetylene 10 x 16 20 20 W000010066

Oxygen 10 x 16 20 20 W000010067

Acetylene 10 x 16 20 40 W000010068

Oxygen 10 x 16 20 40 W000010069

LPG 10 x 16 20 20 W000010053

LPG/Acetylene* 10 x 16 20 40 W000010071

TWIN (Oxygen - Acetylene) 6.3 x 12 10 20 W000010077

TWIN (Oxygen - Acetylene) 6.3 x 12 10 40 W000010063

TWIN (Oxygen - Acetylene) 8 x 14 20 50 W000010078

TWIN (Oxygen - Acetylene) 10 x 16 20 20 W000010054

TWIN (Oxygen - LPG)* 10 x 16 20 40 W000010076

Oxygen 8 x 14 20 50 W000010079

Acetylene 8 x 14 20 50 W000010080

Argon 6.3 x 12 10 40 W000010072

Argon 10 x 16 20 40 W000010073

THE DATE PRINTEDON THE HOSE IS THE

MANUFACTURING DATE

AUTOMATIC ROLLER FOR OXYGAS HOSESAAAAAUUUUUTTTTTOOOOOMMMMMAAAAATTTTTIIIIICCCCC RRRRROOOOOLLLLLLLLLLEEEEERRRRR FFFFFOOOOORRRRR OOOOOXXXXXYYYYYGGGGGAAAAASSSSS HHHHHOOOOOSSSSSEEEEESSSSSAUTOMATIC ROLLER FOR OXYGAS HOSESAUTOMATIC ROLLER FOR OXYGAS HOSES

TUBEREELAutomatic roller for twin hosesdiameter 8 or 10 mm.◆ Automatic roller for twin hoses

diameter 8 or 10 mm.◆ Allows the operator to choose the hose

length suitable to his application◆ Maximum length for inside

diameter 8 mm: 20 m◆ Maximum length for inside

diameter 10 mm: 15 m◆ Provided without hoses

On the ground On a wall

From the ceiling

Roller’s dimensions

To order W000260575

EN ISO 3824

6FL

AME

90

SECURTOP 662 Inlet hoses (mm) Outlet To order

OxygenØ 6.3 and 10

QUICKMATIC II female

W000386367Ø 6,3 and 8 W000386368

Fuel GasØ 6.3 and 10 W000386365Ø 6.3 and 8 W000386366

Kit Oxygen + Fuel gasØ 6.3 and 10 W000400169

Ø 6.3 and 8 W000400170

QUICKMATIC II with integrated FBA D

QUICK ACTION COUPLINGSQQQQQUUUUUIIIIICCCCCKKKKK AAAAACCCCCTTTTTIIIIIOOOOONNNNN CCCCCOOOOOUUUUUPPPPPLLLLLIIIIINNNNNGGGGGSSSSSQUICK ACTION COUPLINGSQUICK ACTION COUPLINGS

ISO 7289 - EN 561

QUICKMATIC IIQUICKMATIC II is the new range of quick couplings designedand manufactured by Weldline.Safety, Performance and Easy to Use are keys words that characterize this new range.

QUICKMATIC II is avalable in several versions:◆ By type of gas - presence of a mechanical coding◆ For mounting on the regulator, between pipes and on the blowpipe◆ With integrated FBA (Flash Back Arrestor)

Advantages:◆ Safety

- Gas fl ow stopped during disconnection due to an internal mechanism- Specifi c design limiting accidental disconnections

◆ Ease of use and ergonomics- «Push System» connection with automatic locking- Studied design to allow to use with one hand

◆ Perfomances- 4 levels of tightness - Compatible with any welding or cutting blowpipe thanks

to limited pressure looses

To order

Tested and approuved by

Integratedfl ash-back arrestor

Separatedfl ash-back arrestor(to place as close as possible from the fl ame)

QUICKMATIC II Ø hoses(mm)

To order

Female connector Male connector

1 Fuel Gas6.3 and 10 W000011002 W000011005

6.3 and 8 W000386369

2 Oxygen6.3 and 10 W000011001 W000011004

6.3 and 8 W000386370

3 Neutral gas (Argon, ...) 4 and 6.3 W000011003 W000011006

Connection between hoses A

QUICKMATIC II Thread Ø hoses(mm)

To order

Female connector Male connector

4 Fuel gas M16 x 150 Left

6 and 10W000011008

W0000110053/8” Left W000011011

5 Oxygen

M16 x 150 Right

6 and 10

W000011007

W0000110043/8” Right W000011010

1/4” Right W000011009

6 Neutral gas (Argon, ...)

12 x 100 Right

4

W000011012

W0000110063/8” Right W000386358

1/4” Right W000386359

Regulator connection B

2016

-29320

16-2

94

Also available in kits :

Females kit

Female / Male kit20

16-2

86

Males kit

2016

-005

To order W000011015 To order W000011016

To order W000011017

2016

-287

4

2016

-289

2016

-290

2016

-292

Recommendations for use

Flame installation

A

C D

2016

-281

1

2

3

5 6

QUICKMATIC II Thread To order

Male connector7

Fuel gas 16 x 150 Left W000011014

Oxygen 16 x 150 Right W000011013

Blowpipes’entry connection C

2004

-820

7

91

* Maximal fl owrate without fl ash-back arrestor

Label Gas Pressuremax. (bar)

Max Flowrate(m3/h)*Letter Color Name Letter

F Red

Acetylen A 1,5 14

Propane P 5 22

Hydrogen H 10 215

Methane M 5 40

MPS Y 5 24

Propylene L 5 22

0 Blue Oxygen 0 20 65

N BlackAir D

20

90

CO2 B 73

Nitrogen, neutral gas N 92

Technical characteristics and usable gases:

QUICKMATIC II Thread To order

Female coupling

8 Fuel gas 16x150 Left W000386360

3/8 Left W000386362

9 Oxygen

16x150 Right W000386361

3/8 Right W000386363

1/4 Right W000386364

Mounting on thread

Usable with neutral gas also:◆ between hoses,◆ on regulator.

2016

-295

2016

-296

A

B

B

98

Visit our factory

6FL

AME

91

92

CUTTING NOZZLES AND ACCESSORIESCCCCCUUUUUTTTTTTTTTTIIIIINNNNNGGGGG NNNNNOOOOOZZZZZZZZZZLLLLLEEEEESSSSS AAAAANNNNNDDDDD AAAAACCCCCCCCCCEEEEESSSSSSSSSSOOOOORRRRRIIIIIEEEEESSSSSCUTTING NOZZLES AND ACCESSORIESCUTTING NOZZLES AND ACCESSORIES

G1 cutting nozzlesand IC cutting nozzles

Blister pack of 3 shields

PROTECFLAM TECHVery fl exible (memory eff ect)Long life duration - Both sides usable200 x 250 mm

PROTECFLAMHeat shield protection for wallsand fl oors during gas welding,brazing or soldering.

PROTECFLAMSingle use 200 x 250 mm

2006

-397

2005

-272

R

To order W000271449

To order W000276078

Asbestos free

No toxic fumes

release

Propane Propane

W000262066 7/10 3-10 W000262098

W000262067 10/10 10-25 W000262099

W000262068 12/10 25-50 W000262100

W000262069 16/10 50-80 W000262101

W000262070 20/10 80-120 W000262102

W000262071 25/10 120-200 W000262105

W000262072 30/10 200-300 W000262106

0327

-031

G1 profi le Gauge(mm)

Cutting thickness

(mm)

IC profi le

Acetylene Acetylene

W000262059 7/10 3-10 W000262089

W000262060 10/10 10-25 W000262091

W000262061 12/10 25-50 W000262093

W000262062 16/10 50-80 W000262094

W000262063 20/10 80-120 W000262095

W000262064 25/10 120-200 W000262096

W000262065 30/10 200-300 W000262097

0327

-033

Inspection mirrorsMirror with magnetic stand

Circular telescopic mirror

For all angle viewing. Fast and accurate visual inspection of hidden areas with an almost limitless number of positions.

Spare part: mirror.

2009

-297

2009

-298

To order W000010557

To order W000010558

To order W000273291

Spark lighter

Traditional tool with fi ve renewal fl ints.

Gun model with ten renewal fl ints.

Tip cleanersUsed to clean welding and cutting nozzles to restore nozzle performance.Contains a rangeof round needlefi les in a metalcarry case.

To order W000211924

To order W000010978

To order W000290900

THERMISHIELD

See page 96

2009

-249