2-WAY FULL-RANGE LOUDSPEAKER 110° × 15°See NOTES TABULAR DATA for detailsCONFIGURATIONSubsystem: Transducer Loading

LF 2× 10 in cone Vented

HF 3× .75 in exit, 1.75 in voice coil Horn-loaded compression driver

Operating Mode:

Amplifier Channels External Signal Processing

Single-amp LF/HF High pass filter

Bi-amp LF,HF DSP w/2-way filtersPERFORMANCE Operating Range: 65 Hz to 20 kHz

Nominal Beamwidth: Horz 110° Vert 15°

Axial Sensitivity (whole space SPL): LF/HF 95 dB 65 Hz to 20 kHz

LF 96 dB 65 Hz to 1520 Hz

HF 102 dB 1320 Hz to 20 kHz

Input Impedance (ohms): Nominal Minimum

LF/HF 8 6.4 @ 200 Hz

LF 8 6.5 @ 630 Hz

HF 16 11.9 @ 20 kHz

High Pass Filter: High Pass =>60 Hz, 12 dB/octave Butterworth

Accelerated Life Test:

LF/HF 79.9 V 800 W @ 8 ohm

LF 79.9 V 800 W @ 8 ohm

HF 35.7 V 80 W @ 16 ohm

Calculated Axial Output Limit (whole space SPL): Average Peak

LF/HF 124 dB 130 dB

LF 125 dB 131 dB

HF 124 dB 130 dB

ORDERING DATA Description Part Number

EAW JFL213 Black 2039855-90

EAW JFL213 White 2041840-90

Optional Accessories

Eye Bolt Forged Shoulder M10 X 1.5 X 37mm 0029818

Flybar JFL & HDA Black [FB221] 2036411

FEATURES• Two-way, constant curvature line array module

• Compact and light; a “one-person lift”

• Easy to mount, fly or ground stack

• Two-module, pole-mounted arrays or up to five modules flown

• Classic EAW output, pattern control and fidelity

DESCRIPTIONThe JFL213 compact, two-way line array module features a range of EAW’s most innovative line array technologies within a mobile, light-weight package appropriate in a wide range of small- to medium-sized venues. With its companion subwoofer, the JFL118, this easy-to-use system solves problems in both portable and permanently installed applications.

The JFL213’s two-way design mounts dual 10-in cone transducers in an optimally vented enclosure and spaced to extend pattern control into the low frequency range. Three horn-loaded, 0.75-in exit / 1.75-in voice coil compression drivers deliver even dispersion of high frequency information over the entire 110° horizontal coverage area.

EAW engineers optimized the JFL213’s size, shape and weight for easy transport and setup by a single person, with side handles designed as part of the rigging system and aligned with the enclosure’s center of balance. Users can mount up to two JFL213s on a loudspeaker stand with a 35mm/1.38-in diameter pole. The cleverly-designed, dual-angle pole mount cup allows the bottom enclosure to be aimed 0° or -15°. (A two-module array with the lower modules aimed at -15° aims the upper module at 0°.) The JFL118 features an integrated pole mount cup, letting it serve as a large, stable base for pole mounting.

The JFL213’s ultra-strong rigging system allows users to hang up to five modules with a 10:1 safety factor, which meets or exceeds all standards enforced throughout the world. A single person can easily connect the modules to the accessory FB221 Fly Bar as well as to each other. The FB221 also doubles as a ground stack base for up to four JFL213s. For permanent installation, each JFL213 provides a pair of M10 threaded mounting points.

The JFL213 allows users to switch between single- or bi-amp powering modes. The JFL213 delivers optimal performance when operated in bi-amp mode with an EAW UX Series digital processor. In addition to the HF shading filters, UX Series digital processor deliver EAW Focusing™ setting, which correct for anomalies that occur in the time domain of any loudspeaker or transducer.

Enclosures are protected by our tough, scratch-resistant RoadCoat™ finish and durable, foam-backed steel grilles protect the transducers. Six year warranty.

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

NOTE: This drawing has been reduced. Do not scale.

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

12

34

12

34

ABC

ABC

PR

O E

NG

INE

ER

2039

856-

CD

-A_D

WG

_CU

STO

MR

_JFL

213

THE

INFO

RM

ATI

ON

CO

NTA

INE

DH

ER

EIN

IS P

RO

PR

IETA

RY

AN

DC

ON

FID

EN

TIA

L P

RO

PE

RTY

OF

LOU

D T

EC

HN

OLO

GIE

S, I

NC

.A

LL R

IGH

TS R

ES

ER

VE

D

UN

LES

S O

THE

RW

ISE

SP

EC

IFIE

D:

ALL

DIM

EN

SIO

NS

AR

E IN

INC

HE

S D

UA

L [M

M] D

IME

NS

ION

S

FOR

RE

F O

NLY

TO

LER

AN

CE

IN IN

CH

ES

LIN

EA

R ±

0.1

3 in

/ ±

3.3

mm

AN

GLE

S ±

1°

(X

.XX

) = R

EF

DIM

SN

O T

OLE

RA

NC

E IM

PLI

ED

TS

C =

TH

EO

RE

TIC

AL

SH

AR

P C

OR

NE

R

DIM

EN

SIO

NS

AC

RO

SS

CE

NTE

RLI

NE

STO

BE

SY

MM

ETR

ICA

LR

EV

ISIO

N:

DR

AW

ING

NU

MB

ER

:

THIR

D A

NG

LE P

RO

JEC

TIO

N

TITL

E:

SC

ALE

:1

1

ww

w.e

aw.c

om

15°

11.8

7[3

01.5

]TS

C15

.64

[397

.2]

(24.

84[6

31.0

])

11.3

7[2

88.8

]TS

C

12.3

7[3

14.2

]

9.73

[247

.3]

8.95

[227

.3]

11.7

4[2

98.1

]

21.1

4[53

7.0]

6.22

[158

.0]

19.4

1[49

3.0]

10.4

3[2

65.0

]

6.89

[175

.0]

5.0

[128

]

6.39

[162

.2]

6.22

[158

.0]

0.18

[4.5

]

DA

TEC

HA

NG

E N

UM

BE

RR

EV

2039

856-

CD

A

AS

HE

ET

O

F 0.

088

DW

G C

US

TOM

ER

JFL

213

[ME

CH

AN

ICA

L S

PE

CIF

ICA

TIO

N]

DA

TEC

HA

NG

E N

UM

BE

RR

EV

9/17

/12

EC

OW

HT8

923

A

2039

856-

CD

A

AS

HE

ET

O

F 0.

088

DW

G C

US

TOM

ER

JFL

213

[ME

CH

AN

ICA

L S

PE

CIF

ICA

TIO

N]

VIE

W A

-A

FRO

NT

TOP

RIG

HT

SID

ED

IME

NS

ION

S A

PP

LYTO

BO

TH S

IDE

S

JFL2

132X

HA

ND

LES

,P

RO

PR

IETA

RY

RIG

GIN

G S

YS

TEM

BA

CK

NO

TES

:1.

SY

MB

OL

I

ND

ICA

TES

MO

UN

TIN

G P

OIN

T,

M10

X 1

.5 T

HR

EA

DE

D H

OLE

(PI A

NG

LE).

2. S

YM

BO

L

IN

DIC

ATE

S C

EN

TER

OF

BA

LAN

CE

.3.

WE

IGH

T A

PP

RO

X. 6

2 lb

[28

kg].

4. S

HIP

PIN

G W

EIG

HT

AP

PR

OX

. 75

lb [3

4 kg

].

GR

ILLE

PA

RTI

ALL

YS

HO

WN

INP

UT

PA

NE

L

2X S

TAC

K P

AD

RO

UTS

PO

LE

MO

UN

T C

UP

S

AA

Exterior-grade Baltic birch plywoodWear resistant textured black paintPowder-coated perforated steel

MaterialFinishGrille

ENCLOSURE

BeamwidthHorizontal = orange Vertical = black

PERFORMANCE DATASee NOTES GRAPHIC DATA for details

Frequency Response: ProcessedLF = green, HF = black, Complete = blue

Frequency Response: UnprocessedLF = green, HF = black, Complete = blue

SP

L (d

B)

SP

L (d

B)

Frequency (Hz)

Frequency (Hz)

ImpedanceLF = green, HF = black, Complete = blue

Phase LinearityComplete = blue

Ohm

sD

egre

es

Frequency (Hz)

Frequency (Hz)

Deg

rees

Frequency (Hz)

Frequency Response: Unprocessed Single-ampSingle Box = green, Multi Box = orange, Long Throw = black

SP

L (d

B)

Frequency (Hz)

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

100

10

110 100 1000 20000

360

100

10

1100 1000 20000

10 100 1000 20000

100

60

70

80

90

120

110

10 100 1000 20000

-10

-50

-40

-30

-20

10

0

180

-0

-180

-90

90

10 100 1000 20000

10 100 1000 20000

100

60

70

80

90

120

110

HORIZONTAL POLAR DATASee NOTES GRAPHIC DATA for details

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

100Hz125Hz160Hz200Hz

250Hz315Hz400Hz500Hz

630Hz800Hz1000Hz1250Hz

1600Hz2000Hz2500Hz3150Hz

4000Hz5000Hz6300Hz8000Hz

10000Hz12500Hz16000Hz

VERTICAL POLAR DATASee NOTES GRAPHIC DATA for details

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

90˚

-90˚

45˚

-45˚

0˚

135˚

-135˚

180˚

100Hz125Hz160Hz200Hz

250Hz315Hz400Hz500Hz

630Hz800Hz1000Hz1250Hz

1600Hz2000Hz2500Hz3150Hz

4000Hz5000Hz6300Hz8000Hz

10000Hz12500Hz16000Hz

NOTESTABULAR DATA 1. Measurement/Data Processing Systems: Primary - FChart: proprietary EAW software; Secondary - Brüel & Kjær 2012. 2. Microphone Systems: Earthworks M30; Brüel & Kjær 4133 3. Measurements: Dual channel FFT; length: 32 768 samples; sample rate: 48 kHz; logarithmic sine wave sweep. 4. Measurement System Qualification (includes all uncertainties): SPL: accuracy +/-0.2 dB @ 1 kHz, precision +/-0.5 dB 20 Hz to 20 kHz, resolution 0.05 dB; Frequency: accuracy +/-1 %, precision +/-0.1 Hz,resolutionthelargerof1.5Hzor1/48octave;Time:accuracy+/-10.4μs,precision+/-0.5μs,resolution10.4μs;Angular:accuracy+/-1°,precision+/-0.5°,resolution0.5°. 5. Environment: Measurements time-windowed and processed to eliminate room effects, approximating an anechoic environment. Data processed as anechoic or fractional space, as noted. 6. Measurement Distance: 7.46 m. Acoustic responses represent complex summation of the subsystems at 20 m. SPL is referenced to other distances using the Inverse Square Law. 7. Enclosure Orientation:Forbeamwidthandpolarspecifications,asshowninMechanicalSpecificationdrawing. 8. Volts: Measured rms value of the test signal. 9. Watts:Peraudioindustrypractice,“loudspeakerwatts”arecalculatedasvoltagesquareddividedbyratednominalimpedance.Thus,thesearenotTrueWattunitsofenergyasdefined by International Standard. 10. SPL: (Sound Pressure Level) Equivalent to the average level of a signal referenced to 0 dB SPL = 20 microPascals. 11. Subsystem: This lists the transducer(s) and their acoustic loading for each passband. Sub = Subwoofer, LF = Low Frequency, MF = Mid Frequency, HF = High Frequency. 12. Operating Mode:Userselectableconfigurations.Betweensystemelements,acomma(,)=separateamplifierchannels;aslash(/)=singleamplifierchannel.DSP=DigitalSignalProcessor. IMPORTANT:Toachievethespecifiedperformance,thelistedexternalsignalprocessingmustbeusedwithEAW-providedsettings. 13. Operating Range: Range where the processed Frequency Response stays within -10 dB SPL of the power averaged SPL within this range; measured on the geometric axis. Narrow band dips are excepted. 14. Nominal Beamwidth: Design angle for the -6 dB SPL points, referenced to 0 dB SPL as the highest level. 15. Axial Sensitivity: Power averaged SPL over the Operating Range with an input voltage that would produce 1 W at the nominal impedance; measured with no external processing on the geometric axis, referenced to 1 m. 16. Nominal Impedance: Selected 4, 8, or 16 ohm resistance such that the minimum impedance point is no more than 20% below this resistance over the Operating Range. 17. Accelerated Life Test:MaximumtestinputvoltageappliedwithanEIA-426Bdefinedspectrum;measuredwithrecommendedsignalprocessingandRecommendedProtectionFilter. 18. Calculated Axial Output Limit: Highest average and peak SPLs possible during the Accelerated Life Test. The Peak SPL represents the 2:1 (6 dB) crest factor of the Life Test signal. 19. High Pass Filter: This helps protect the loudspeaker from excessive input signal levels at frequencies below the Operating Range.

GRAPHIC DATA 1. Resolution:Toremoveinsignificantfinedetails,1/12octavecepstralsmoothingwasappliedtoacousticfrequencyresponsesand1/3octavecepstralsmoothingwasappliedtothebeamwidthand impedance data. Other graphs are plotted using raw data. 2. Frequency Responses: Variation in acoustic output level with frequency for a constant input signal. Processed: normalized to 0 dB SPL. Unprocessed inputs: 2 V (4 ohm nominal impedance), 2.83 V (8 ohm nominal impedance), or 4 V (16 ohm nominal impedance) referenced to a distance of 1 m. 3. Processor Response: The variation in output level with frequency for a constant input signal of 0.775 V = 0 dB reference. 4. Beamwidth:Averageangleforeach1/3octavefrequencybandwhere,startingfromtherearoftheloudspeaker,theoutputfirstreaches-6dBSPLreferencedto0dBSPLasthehighestlevel.Thismethod means the output may drop below -6 dB SPL within the beamwidth angle. 5. Impedance: Variation in impedance magnitude, in ohms, with frequency without regard to voltage/current phase. This means the impedance values may not be used to calculate True Watts (see 9 above). 6. Polar Data: Horizontal and vertical polar responses for each 1/3 octave frequency band 100 Hz to 16 kHz or Operating Range.

LEGENDHPF: High Pass Filter for crossover –or– Recommended High Pass Filter.LPF: Low Pass Filter for crossover.LF/MF/HF: Low Frequency / Mid Frequency / High Frequency.AMP: User Supplied Power Amplifier –or– Integral Amplifier for NT products.XVR: Passive LPFs, HPFs, and EQ integral to the loudspeaker.EAW Focusing: Digital Signal Processor capable of implementing EAW Focusing.

JFL213 Specifications

Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | tel 800 992 5013 / +1 508 234 6158 | fax 508 234 8251 | www.eaw.com

APR2015Part Number: RD0732 Rev C00EAW products are continually improved. All specifications are therefore subject to change without notice.

INPUT PANEL REV: DESCRIPTION:

REVISIONS

A00 NEW ISSUE PER ECOWHT8897 MJC

DWG SPEC/INPUT JFL213

SCALE:

2038890-SDMJC 09/14/11DRAWING NUMBER:DATE:DRAWN BY:

1 of 1

1:1REV:

A00LOUD TECHNOLOGIES INC, ALL RIGHTS RESERVED

ONE MAIN STREET, WHITINSVILLE, MA 01588 USA

LOUD Technologies Inc.

TITLE:

SHEET:ADOBE ILLUSTRATOR

BI-AMP

SINGLE-AMPPIN 1PIN 1PIN 2PIN 2

PIN 1 LF

NCNC

LFPIN 1PIN 2 HF

HFPIN 2

BI-AMP

SINGLE-AMPPIN 1PIN 1PIN 2PIN 2

PIN 1 LF

NCNC

LFPIN 1PIN 2 HF

HFPIN 2

HF SHADING

MULTI BOX

SINGLE BOX

LONG THROW

BI-AMP

SINGLE-AMP

OPERATING MODEJFL213

JFL213 = 30 KG / 65 LBJFL213 RIGGING WORKING LOAD LIMIT (WLL): FIVE(5)

JFL213 IN SUCCESSION. 148 KG / 325LB FAILURE TO FOLLOW MANUFACTURER’S

INSTRUCTIONS CAN RESULTIN DAMAGE, INJURY, OR DEATH.

DESIGNED IN WHITINSVILLE, MA, USA. MANUFACTURED IN CHINA. ©2012 LOUDTECHNOLOGIES, INC. “EAW” IS A REGISTERED TRADEMARK OF LOUD TECHNOLOGIES, INC.

THIS PRODUCT HAS M10 MOUNTING POINTS. SEE OWNER’S MANUAL.

REVISIONSERIAL NUMBER

NLT4MP

NLT4MP

SIGNAL DIAGRAM

DSPEQ

DELAYHPF/LPF

OR“EAW FOCUSING”

AMP

2-Way, Bi-Amp (LF, HF)

AMP

HF

LF

HPF

2-Way, Single-Amp (LF/HF)

AMP XVR

HF

LF