Fixed Fntl Appliance
-
Upload
drnilofervevai2360 -
Category
Documents
-
view
220 -
download
0
Transcript of Fixed Fntl Appliance
![Page 1: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/1.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 1/250
Guide By
Dr. Chandralekha B Dr. Nilofer
Prof. & HOD PG Student
Dr. Roopa Tubaki
Sr. Lecturer
Vydehi Institute Of Dental Sciences
![Page 2: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/2.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 2/250
Contents Introduction Classification Advantages
Appliances In Detail. Herbst Appliance. Modification Of Herbst Appliance. Jasper Jumper . The MARS device.
The Mandibular Protraction Devices. The Amoric Torsion Coils. The Scandee Tubular Jumper. The Cantilevered Bite Jumper The IST device.
![Page 3: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/3.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 3/250
The Adjustable bite corrector.
The Churro Jumper . The Eureka Spring.
The SAIF spring.
The Universal Bite Jumper.
The Ritto Spring.
The Magnetic Telescopic Device.
The Twin Force Bite Corrector.
Alpern Class II Closers.
![Page 4: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/4.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 4/250
The Mandibular Correctors.
The Horizontal Anterior Positioning Appliance.
The Mandibular Anterior Repositioningappliance.
The Biopedic Appliance.
The Klapper Superspring II.
The FORSUS Fatigue Resistance Device.
Hybrid Appliance.
Conclusion
![Page 5: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/5.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 5/250
![Page 6: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/6.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 6/250
Introduction Definition :
A functional appliance by definition is one that
changes the posture of the mandible, holding it openor open and forward, stretches the soft tissues andchanges the tone of the muscles, creating pressures which are transmitted to the dental and skeletal
structures, moving teeth and modifying growth.
![Page 7: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/7.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 7/250
Functional Appliances have been in existence for over85 years .
The first of which was given by Emil Herbst … howeverthese were not well accepted at that time till later when these were reintroduced by Hans Pancherz.
![Page 8: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/8.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 8/250
Removable functional appliances are normally very
large in sizehave unstable fixation
cause discomfort
lack tactile sensibility exert pressure on the mucous (encouraging gingivitis),reduce space for the tongue
cause difficulties in deglutition and speech
affect aesthetic appearance.
![Page 9: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/9.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 9/250
The alteration in the mandibular posture createsadded difficulties. These adverse effects make theadaptation and acceptance of these appliances moredifficult.
[Ref : Attitudes to orthodontic treatment. Oliver and Knappman British Journal of Orthodontics 1985; 12:179-88.
Ngan P., Kess B., Wilson S. Perception of discomfort by patients undergoing orthodontic treatment. Am. J.Orthod. Dent. Orthop. 1989; 96:47-53.]
![Page 10: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/10.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 10/250
Fixed functional appliances are normally known as"non-compliance Class II correctors"
This gives a false idea about the co-operation necessary during treatment. In reality, when we compare them toremovable appliances, we can clearly recognize fixedappliances as non-compliance devices.
However, for treatment to be successful, good co-operation is always necessary, especially if skeletalmodifications instead of dentoalveolar compensationare desired.
![Page 11: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/11.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 11/250
![Page 12: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/12.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 12/250
Advantages… Fixed functional systems have some advantages over
removable systems.1. They are designed to be used 24 hours a day, which
means that there is a continuous stimulus for mandibulargrowth.
2. They are smaller in size permitting better adaptationto functions such as a mastication, swallowing, speechand breathing.
3. Fixed functional appliances are usually described as non-compliance Class II devices, which are able to treat ClassII malocclusions successfully, while reducing the need forpatient co-operation and overall treatment time. It ispossible to treat this type of malocclusion with minimaleffort.
![Page 13: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/13.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 13/250
4. Short treatment time due to the above 6-8 mths.
5. Just as the name implies, what distinguishes themfrom removable appliances is that it is impossible for
the patient to remove them. What we have therefore,is an appliance that allows greater control by theorthodontist.
6. Leads to the development of a “New Morphogenetic
pattern”. 7. Has other actions also such as molar distalizing
effect, correction of midlines, headgear effect etc.
![Page 14: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/14.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 14/250
Disadvantages The main disadvantage that may be encountered is
dental movement that takes place during treatment.
In certain FFA’s components have an increasedtendency to fracture.
The size of different components may have to bealtered as the patient may outgrow it or the desired
effect may be achieved. The above factors add to the cost.
![Page 15: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/15.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 15/250
![Page 16: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/16.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 16/250
I According To Type Of Forces Produced :
Appliances Producing Pushing Force Appliances Producing Pulling Force.
These appliances deliver a pushing force vector forcing the attachment points of the appliance away from one another .
e.g Herbst App.
These appliances create a pulling force vector between the points of
attachment.e.G The SAIF Spring.
![Page 17: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/17.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 17/250
II Depending Upon flexibility : Rigid Fixed Functional Appliance { RFFA}.
RFFAs do not easily fracture but neither do they have elasticity orflexibility.
After fitting and activation they do not allow the patient to close incentric relation. This means that the mandible is in a forward position24 hours a day creating greater stimulus for mandibular growth than
with FFFAs.
Used in Class II Div 1 & 2, And in Class III
Flexible Fixed Functional Appliance { FFFA }The type of the force exercised by this is continuous and
elastic in nature .These Fracture /Get fatigued easily.
FFFAs are not recommended in mixed dentition, especially late mixeddentition to avoid unwanted dental movements.
![Page 18: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/18.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 18/250
Types RFFA with Pushing Forces:1. Herbst Appliance and its modifications.2. Mandibular advancement repositioning
splint.3. Mandibular protraction appliance.4. Eureka Spring.5. Universal Bite Jumper.6. Biopedic.7. Mandibular anterior repositioning
appliance .8. Functional Mandibular Advancer.
FFFA with Pushing Forces1. Jasper Jumper.
2. The Bite Fixer .
3. Churro Jumper.
4. The Amoric Torsion Coils.
5. Adjustable Bite Corrector.
6. Universal Bite Jumper.
7. Klapper Super Spring II.
8. Forsus.
9. The Scandee Tubular Bite Jumper.
10. The Magnetic Telescopic Device.
11. The Mandibular Protraction Appliance.
12. The BioPedic Appliance
13. The Mandibular AnteriorRepositioning Appliance
14. The IST – Appliance
15. The Ritto Appliance
![Page 19: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/19.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 19/250
![Page 20: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/20.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 20/250
In spite of considerable research and debate, the precise
mode of action of functional appliances remains obscure.
Many theories seem to be propounded which arementioned as follows and can act singularly or in
combination…these theories are common to both fixed andremovable myofunctional appliances..
They are:
1. Dentalveolar changes.
2. Redirection Of Condylar growth.
3. Deflection Of Ramal Form.
4. Horizontal Expression Of Mandibular Growth.
![Page 21: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/21.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 21/250
5. Changes in neuromuscular anatomy and function.
6. Adaptive changes in glenoid fossa locationLeading to anterior repositioning of the mandible.
[ Ref : The Influence Of Functional Appliance Therapy OnGlenoid Fossa Remodelling. DG Woodside,a Metaxas,G Altuna AJODO 1987 ; Vol 82 : Pg 181 -198 ]
![Page 22: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/22.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 22/250
![Page 23: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/23.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 23/250
![Page 24: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/24.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 24/250
Herbst Appliance Introduced in the 5th International Dental Congress in
Berlin in the year 1909 by Emil Herbst.
Called it the “ Fixed Bite Jumping Device” or“Scharnier” or “Joint”.
In 1934 he published 3 articles in the journal
Zahnarztliche Rundschau on his experiences with theappliance.
In the same journal his work was criticised by MartinSchwarz in 2 articles.
![Page 25: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/25.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 25/250
According to Schwarz, the Herbst appliance could result inan overload of the anchorage teeth with periodontaldamage as a consequence. This claim has, however, beendisproved in a recent thesis of Pietz(2000).
However it was to be found that Herbst was much ahead of his time. His contributions were many 90% of what is known today. His main contribution to modern orthodontics was,
however, the development of the Okklusionsscharnier or
Retentionsscharnier (Herbst appliance)
[ Ref : “ History, Background, and Development of theHerbst Appliance” Hans Pancherz Semin Orthod 2003;9:3-11.]
![Page 26: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/26.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 26/250
The Original Herbst Appliance
![Page 27: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/27.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 27/250
In 1977 Hans Pancherz reinstated clinical trials.
Reintroduced by in 1979.
In his article “History, Background, and Development of the Herbst Appliance”
Hans Pancherz (Semin Orthod 2003;9:3-11.) hasbeautifully described the history development and
background of this appliance with useful clinicalinformation and a background on Dr. Emil Herbst.
![Page 28: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/28.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 28/250
Advantages of The Herbst Appliance over Activator,Bionator, And Frankel…
1. It is Fixed to the teeth.
2. Patient compliance not at all required for correctfunctioning.
3. Works 24 hrs a day.
4. Treatment time is shortened.
![Page 29: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/29.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 29/250
The Basic Design Of Herbst The Herbst appliance is a fixed bite-jumping device for
the treatment of skeletal Class II malocclusions.
It can be compared with an artificial joint workingbetween the maxilla and mandible.
A bilateral telescope mechanism keeps the mandiblein an anterior-forced position during all mandibular
functions such as speech, chewing, biting, andswallowing.
![Page 30: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/30.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 30/250
The telescope mechanism (tube and plunger) isattached to orthodontic bands, crowns, or splints.
The tube is positioned in the maxillary first molarregion and the plunger in the mandibular firstpremolar region.
The telescopes allow mandibular opening and closing
movements and when constructed properly lateral jawmovements are also possible.
![Page 31: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/31.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 31/250
Originally the telescopes were curved .
Made Of German Silver / Gold. Gold if worn morethan 6 months
Bands or Crowns /Caps were used on Abutment teeth.
Originally placed upside down with plunger onmaxillary molar.
No opening at the back.
![Page 32: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/32.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 32/250
![Page 33: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/33.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 33/250
The telescopes allowmandibular opening andclosing movements and
when constructed properly lateral jaw movements arealso possible.
![Page 34: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/34.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 34/250
Each telescope consists of a tube, a plunger, 2pivots (axle), and two locking screws that prevent
the telescoping parts from slipping past the pivots.
![Page 35: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/35.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 35/250
![Page 36: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/36.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 36/250
Length of the plunger should be kept at a maximum to
prevent it from disengaging from the tube.
A large interpivot distance prevents the plunger fromslipping out of the tube when the mouth is opened
wide. A plunger too far behind the tube can injure the buccal
mucosa.
If plunger disengages from the tube on mouthopening, it may get stuck in the tube opening onsubsequent mouth closure and damage the appliance.
![Page 37: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/37.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 37/250
Anchorage Forms Of The Herbst.. Deserves special attention.
Because of anchorage loss, maxillary and
mandibular tooth movements cannot be avoided. Several anchorage systems have been developed to
control unwanted tooth movements
![Page 38: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/38.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 38/250
From 1909 - 1934 The standard anchorage system used by Herbst:
Crowns or caps were placed on the maxillary permanentfirst molars and mandibular first premolars (sometimescanines).
The crowns/caps were joined by wires that run along thepalatal surfaces of the upper teeth and the lingual surfacesof the lower teeth.
![Page 39: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/39.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 39/250
If second permanent molars have not erupted then Herbst advised to anchor the appliance more
firmly by placing bands on the canines, which weresoldered to the palatal arch wire as were the uppermolars.
Alternative to bands on the upper canines, a thingold wire was placed on the labial surfaces of theupper incisors and soldered to the palatal arch
wire.
![Page 40: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/40.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 40/250
When using the Herbstappliance in the early mixeddentition, Herbst had thefollowing solution:
In the maxilla, thepermanent central incisors
were used for anchorageinstead of the cuspids.
In the mandible, crowns were placed on the first
permanent molars andbands on the 4 permanentincisors.
![Page 41: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/41.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 41/250
Late mixed dentition anchorage Canines are used as
anchorage teeth instead of incisors.
Buccal mucosa at thecorner of the mouth is proneto ulceration whenmandibular canine is used as
an abutment tooth for theplunger.
![Page 42: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/42.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 42/250
Herbst and others realized the necessity of incorporating as many teeth as possible foranchorage to avoid unwanted side effects.
Schwarz( 1934): Most teeth in the maxilla andmandible were interconnected by labial as well aslingual arch wires this was called Block anchorage.
![Page 43: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/43.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 43/250
1979 Onwards… Pancherz originally used a banded type of Herbst
appliance.Individually made stainless steel bands of
a thick material (0.15- 0.18mm) were used. 1. Simple anchorage system
2. Increased anchorage system
3. Total anchorage system
4. Cantilever Herbst
![Page 44: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/44.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 44/250
Maxilla- Bands are placedon 1st permanent molarsand first premolars. Joined
on each side by sectionalarch wires.
Mandible- Premolars are
banded and connected with a lingual sectionalarch.
![Page 45: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/45.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 45/250
Disadvantages:
Space opening distal to maxillary canines
Excessive intrusion of 1st
permanent molars. Buccal tipping of 1st premolars
Large proclination of lower anteriors
• Thus, anchorage had to be increased by incorporatingmore teeth.
![Page 46: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/46.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 46/250
Increased anchorage system Maxillary and mandibular front teeth were
incorporated in the anchorage system by labialsectional arch wires.
Mandibular lingual arch wire extended to 1st
permanent molars. Since 1995, cast chrome-cobalt splints are used routinely.
![Page 47: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/47.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 47/250
The splints cover all buccal teeth in the maxillary and
mandibular arches and also the mandibular canines.
Chair time is short and the appliance is strong, hygienic,and causes few clinical problems.
![Page 48: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/48.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 48/250
In the early 1980s, Howe and McNamara developed theacrylic splint Herbst appliance which is used both.as a fixed(bonded to the teeth) and removable appliance.
However, use of the Herbst as a removable device is notrecommended.
![Page 49: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/49.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 49/250
The Cantilever Herbst appliance design is mainly indicated in the early mixed dentition before the eruptionof the mandibular permanent canines and first premolars.
The lower part has heavy metal extension arms that aresoldered to the permanent first molar crowns.
The arms extend anteriorly, lateral to the dentition and
terminates in the premolar region in which the telescopingaxles are soldered.
Have occlusal rests incorporated.
![Page 50: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/50.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 50/250
![Page 51: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/51.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 51/250
Support wires attached to the cantilever arms, working as
occlusal rests on the first or second deciduous molars areimportant.
Without these rests (as seen in earlier designs of thisappliance), the vertical force vector of the telescopes acting
as lever arms will result in uncontrolled mesial tipping andextrusion (extraction) of the molar teeth.
But the anchorage control of the mandibular molars withthe cantilevers (even when using occlusal rests on thedeciduous molars) is questionable.
![Page 52: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/52.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 52/250
None of the anchorage systems used in Herbsttreatment could prevent anterior movement of themandibular incisors and molars. ( Pancherz andHansen1988)
Lower anchorage is a problem difficult to master inHerbst treatment. Some factors associated with anchorloss can be :
Severity of A-P interarch discrepancy
Amount of bite jumping at the start of treatment.
![Page 53: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/53.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 53/250
Treatment EffectsSagittal
Skeletal
Dental
Vertical
Skeletal
Dental
![Page 54: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/54.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 54/250
Sagittal Changes… 1.Restrains maxillary growth and decrease of SNA angle.
2. Increases mandibular length
(Pancherz 1979, 1981, 1982). This finding is in agreement with several bite jumping experiments in growingmonkeys (Stockli and Willert 1971, McNamara 1972,1973, 1975) and rats (Petrovic and Stutzman 1969).
![Page 55: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/55.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 55/250
Evidence of temporomandibular growthadaptations in Herbst treatment:
Three adaptive processes in the TMJ are thought tocontribute to the changes of mandibular position.
1) Condylar remodeling. (2)Glenoid fossa remodeling;
(3) Condylar position changes within the fossa.
![Page 56: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/56.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 56/250
Animal Studies Peterson and McNamara (semin orthodontics
2003) :
Evaluated histologically the TMJ, glenoid fossa, andthe posterior border of the mandible in juvenileRhesus monkeys whose mandibles had beenpositioned forward with a Herbst appliance
![Page 57: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/57.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 57/250
Condyle remodelling :
Especially in the Posterosuperior region of the condyle.
Glenoid Fossa Remodelling :
Significant deposition of new bone on the anteriorsurface of the postglenoid spine occurred, indicating ananterior repositioning of the glenoid fossa. Similar to(Breitner 1930,33).
Significant bone resorption on the posterior surface of the postglenoid spine was noted
![Page 58: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/58.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 58/250
Significant bony apposition on the posterior border
of the mandibular ramus was evident during early experimental periods.
No gross or microscopic pathological changes were
noted in TMJ of the juvenile Rhesus monkey.
![Page 59: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/59.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 59/250
Clinical Studies Have provided radiographic evidence of TMJ growthadaptation in Herbst treatment.
Paulsen et al (1995) :
Analysed TMJ changes in a single case of Herbst treatment inlate puberty using CT scanning and OPG.
Three months after insertion of the appliance CT-scanning andOPGs of the TMJ revealed new bone formation as a doublecontour in the articular fossa and on the posterior part of thecondylar process as a result of adaptive bone remodeling.
![Page 60: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/60.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 60/250
Ruf and Pancherz (1998, 1999):
Analysed three possible adaptive TMJ growth processescontributing to increase in mandibular prognathismaccomplished by Herbst treatment :
Condylar remodelingGlenoid fossa remodeling
Condyle fossa relationship changes. Aidar, Abrahao ,Yamashita , Dominguez (AJO 2006)
assesed the TMJ disc position with MRI after 12 monthperiod of herbst appliance therapy in 20 ClassII div1patients. They found mild changes in position of thedisc with slight tendency towards retrusion due tomandibular advancement which returned to normalafter appliance removal. These changes were in thenormal phsiological limits as evaluated in short term.
![Page 61: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/61.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 61/250
Dental Changes Basically a result of anchorage loss in the two dental arches.
1. Mandibular teeth are moved anteriorly.
Proclination of lower anteriors. Mandibular incisors
proclined on an average of 6.6 during 6 months(Pancherz, 1985). In 24 class II subjects treated with theHerbst appliance (Hansen et al, 1997), the proclinationduring treatment was 11.
2. Lower Incisor Proclination and recession.
Large amount of lower incisor proclination duringHerbst treatment could be thought to causebreak down of the labial gingival attachment &create gingival recessions
![Page 62: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/62.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 62/250
Maxillary Molars are driven distally…
The effect of the Herbst appliance on maxillary molar teeth is essentially comparable with that of ahigh pull headgear (Pancherz, Anechus-Pancherz, 1993). The teeth are both distalized and
intruded.
Normally, the dental changes occurring duringHerbst appliance treatment would not be
desirable. Distal tooth movements in maxillary buccal segments could however, be desirable incases with anterior crowding
![Page 63: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/63.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 63/250
Mesial Movement Of Lower Molars.
Sagittal Dental Arch Relationship…
Overjet is reduced in all patients during treatment by increase in mandibular length and mesial movement(proclination) of the mandibular incisors.
Class II molar correction by increase in mandibular length,distal movement of maxillary molars and mesial movementof the mandibular molars.
Herbst appliance corrects or overcorrects both molar & canine sagittalrelation in most of the cases. However treatment is more effective inthe molar than in the canine region
![Page 64: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/64.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 64/250
Arch Perimeter…
Because of the distalizing forces of the telescopemechanism of the Herbst appliance on the upper1st molars and the anteriorly directed forces on thelower front teeth, the maxillary and mandibular
arch perimeters increase during treatment.(Hansen et al, 1995)
Arch perimeter changes are, however, of atemporary nature because settling of the teethduring the immediate post treatment period.
![Page 65: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/65.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 65/250
Arch Width… Hansen et al (1995) : During treatment the maxillary and mandibular
dental arches expand laterally in both canine andmolar areas. The expansion is more marked in themaxilla than in the mandible.
![Page 66: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/66.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 66/250
Vertical Changes Dental
In Class II malocclusions with deep bites, overbitemay be reduced significantly by Herbst therapy (Pancherz, 1982, 1985) an average of 3.0mm (55%)during 6 months of treatment.
Overbite reduction is primarily accomplished by
intrusion of lower incisors and enhanced eruptionof lower molars.
![Page 67: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/67.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 67/250
Part of the registered changes in the vertical position of themandibular incisors results from proclination of theseteeth.
Because of vertical dental changes, maxillary andmandibular occlusal planes tip down.
![Page 68: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/68.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 68/250
Skeletal
Increase in lower anterior facial height (LAFH) due to overeruption of lower posterior teeth.
Increase in gonial angle – this may be due to a
more sagittaly directed growth of the condyle or itmay result from resorptive bone changes in thegonion region, probably as a consequence of analtered muscle function during bite jumping(Pancherz & Littman, 1989)
![Page 69: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/69.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 69/250
The following changes contribute to Herbstappliance correction of class II malocclusion.
Stimulation of mandibular growth.
Inhibition of maxillary growth (a less important change)
Distal movement of upper dentition
Mesial movement of lower dentition (proclination of the
incisors
![Page 70: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/70.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 70/250
Indications For Treatment Growing individuals ( Pancherz Ajo Do 1985).
Should not be used in non growing subjectsbecause.
1. Skeletal alterations will be minimal.2. More of dentoalveolar changes.
3. Increase risk of developing dual bite.
![Page 71: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/71.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 71/250
Postadolescent patients: Who have passed the maximum pubertal growth spurt and
have still some growth potential left, treatment with theHerbst appliance is indicated as it can be finished within 6 to
8 months. Mouth breathers: Nasal airway obstructions can make
the proper use of removable appliances difficult orimpossible but doesn’t interfere with herbst.
Uncooperative patients: It is fixed to the teeth without any assistance from the patient.
Patients who do not respond to removable appliances.
![Page 72: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/72.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 72/250
For mandibular fracture (particularly ramus) patientsafter surgery
For prevention of bruxism
For diseases of the TMJ
![Page 73: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/73.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 73/250
Treatment Timing Most favorable time to treat the patients with the Herbstappliance is at the peak of pubertal growth spurtPancherz, Hagg, 1985.
Pancherz & Hagg (1988): Indicated that the patientstreated at the initial closure of the middle phalanx of thethird finger (MP3-FG) had the greatest amount of condylargrowth.
Because mandibular growth stimulation using the herbst
appliance is also possible in post adolescent young adultsubjects, a new concept of Class II therapy is proposed in which the Herbst appliance is used as an alternative toorthognathic surgery in Class II subjects.
![Page 74: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/74.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 74/250
Perfect end result cannot be obtained exclusively with Herbst.
Class II cases cannot be treated to a perfect end
result with the Herbst appliance exclusively. Many cases will require a subsequent dental-alignmenttreatment phase with a multibracket appliance.
![Page 75: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/75.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 75/250
Thus, treatment of a Class II, Division 1 malocclusion will usually occur in two steps
STEP 1. ORTHOPEDIC PHASE. The sagittal jaw
base relationship is normalized and the Class IImalocclusion is transferred to a Class Imalocclusion by means of the Herbst appliance.
STEP 2. ORTHODONTIC PHASE. Toothirregularities and arch discrepancy problems aretreated with a multibracket appliance (with or
without extractions of teeth).
![Page 76: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/76.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 76/250
A Class II, Division 2 malocclusion may require a three-steptreatment approach
STEP 1. ORTHODONTIC PHASE. Alignment of theanterior maxillary teeth by means of a multibracketorthodontic appliance.
STEP 2. ORTHOPEDIC PHASE. Normalization of sagittal
jaw base relationships and transformation of the Class IImalocclusion into a Class I malocclusion by means of theHerbst appliance.
STEP 3. ORTHODONTIC PHASE. Tooth irregularities andarch-discrepancy problems are treated with a multibracket
appliance (with or without extractions of teeth).
![Page 77: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/77.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 77/250
So the ideal patient for treatment with the Herbstappliance has the following characteristics:
Skeletal morphology.
• Retrognathic mandible.
• Small mandibular plane angle indicating an anterior
growth direction of the mandible. (A favorable growthpattern both facilitates treatment and counteracts posttreatment relapse.)
• Normal or reduced lower facial height.
![Page 78: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/78.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 78/250
l Dental morphology:
Class II dental arch relationship with increased overjetand normal or increased overbite (open bite cases not
suitable for Herbst appliance). Maxillary and mandibular teeth well aligned and the
two dental arches fitting each other in normal sagittalposition
Maturation: Treatment during pubertal growth spurt.
![Page 79: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/79.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 79/250
Types Of Herbst Appliance Original Design Maintained With A Few
Modifications….
Type I
Type II
Type III
Type IV
![Page 80: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/80.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 80/250
Type I Type I is characterized by a fixing system to the crownsor bands through the use of screws. This is the mostcommon form. It is necessary to weld the axles to the
bands or crowns and then fix the tubes and plungers with the screws
![Page 81: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/81.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 81/250
Type II Type II has a fixing system that fits directly onto the
archwires through the use of screws. This method of application has the disadvantage of causing constantfractures in the archwires. The lack of flexibility
together with the difficulty in lateral movements andthe stress placed on the archwires through activationcauses fractures, especially in the lower arch
![Page 82: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/82.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 82/250
Type IV Type IV has a fixation system with a ballattachment, which allows greater flexibility andfreedom of mandibular movement.
A disadvantage in relation to other similarappliances is the fact that it needs brakes tostabilize the joint. These brakes are small and
sometime difficult to fit.
![Page 83: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/83.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 83/250
![Page 84: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/84.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 84/250
![Page 85: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/85.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 85/250
Class II malocclusions who have narrowmaxillary arches, Herbst
appliance with1. A quad helix lingualarch wire or
2. Rapid palatal
expansion device to theupper premolar andmolar bands or to thesplint.
![Page 86: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/86.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 86/250
![Page 87: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/87.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 87/250
Herbst With Stainless Steel CrownsNorris M. Langford
(1982 ) suggested using stainless
steel crowns on the upper firstmolar and the lower firstpremolar and canine for theHerbst appliance which aresuperior to banding, in that they
are resistant to breakage andbecoming loose.
![Page 88: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/88.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 88/250
Modifications
the substitution of stainless steel crowns forbands.
the elimination of the stabilizing bar.
![Page 89: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/89.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 89/250
The Bonded H
![Page 90: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/90.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 90/250
The Bonded Herbst Appliance The bonded Herbst appliance eventually evolved intothe acrylic splint Herbst appliance (McNamara, 1988;McNamara and Howe 1988).
The acrylic splint Herbst appliance is composed of a wire framework over which has been adapted, 2.5-3.0mm thick splint Bioacryl, using a thermal pressuremachine
![Page 91: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/91.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 91/250
By substituting an acrylic splintfor the stainless steel bands of the earlier appliance, the Herbst
mechanism can be attached toboth maxillary and mandibulararches using bondingprocedures
![Page 92: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/92.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 92/250
The maxillary splint covers allavailable maxillary teeth withexception of the central andlateral incisors
The occlusal thickness of themaxillary splint is kept to aminimum, so that the cusps of the posterior teeth perforatethe splint
![Page 93: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/93.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 93/250
These perforatedopenings permit theplacement of the nylon
tip of a posterior band-removing plier againstthe cusps.
![Page 94: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/94.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 94/250
Disadvantage of Banded Herbst:
I) Repeated breakage and loosening of theappliance occurs, especially in the lower
bicuspid band area.II) Rapid intrusion of the mandibular first
bicuspids which though temporary, partially deactivates the appliance.
III) As the bicuspids are depressed, the lingualarch is also depressed, resulting inimpingement on the lingual gingiva.
IV) Possibility of incisal tooth fracture.
![Page 95: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/95.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 95/250
Headgear Herbst Appliance Weislander 1984.
Suggested the use of headgear – Herbst appliance in thetreatment of large sagittal discrepancies between the
maxilla and mandible in early mixed dentition. The Herbst appliance consisted of a cast of vitallium
bonded to the lower arch and with bands on the upper firstpermanent molars.
The upper bands were united with a palatal bar andconnected to the lower splint with the Herbst telescopicarms.
![Page 96: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/96.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 96/250
He concluded that a shortperiod of interceptiveorthopedic treatment in
the very early mixeddentition may beindicated to correctskeletal deviation andestablish a normal
relationship betweenmaxilla and mandible.
![Page 97: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/97.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 97/250
Cantilevered Herbst Appliance Larry W White 1994.
Buccal cantilever wire is made by doubling .045" wire and
soldering the two strands together.
![Page 98: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/98.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 98/250
This design isparticularly useful whenmandibular bicuspids
are absent or theprimary molars cannot withstand functionalforces.
Modified Herbst Appliance For
![Page 99: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/99.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 99/250
Modified Herbst Appliance For
Mixed Dentition. Introduced by Philip Goodman and Paul Mc Kenna, 1985
They stated the middle phalanx development may, indicateoptimal treatment timing, but the patient’s bicuspids arenot erupted enough to receive either bands or crown.
Also they encountered a modification where stainless steelcrowns are fitted on the upper first permanent molars andbands on the lower first molars and incisors.
![Page 100: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/100.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 100/250
The deciduous first and second molars are free to exfoliate
through the framework
![Page 101: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/101.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 101/250
If the patient is uncomfortable with much mandibularadvancement, have the patient
retrude the mandible until thediscomfort disappears. Thetelescopic part of the appliancecan be advanced again in six toeight weeks using washers or
metal sleeves.
![Page 102: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/102.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 102/250
The Emden Herbst Appliance Introduced by Tarek Zreik, 1994 to overcome breakage
problems, he had with the Herbst appliance.
This modification makes the Herbst more durable, simpleand hygienic.
The Herbst mechanism is attached to stainless steel crowns on the maxillary first permanent molars and to the lower
arch through a removable acrylic splint. Double buccal tubes on the stainless steel crowns can hold
utility, sectional, or continuous archwires
![Page 103: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/103.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 103/250
![Page 104: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/104.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 104/250
• Advantages of the EMBDEN Herbst
It requires minimal cooperation.
• It promotes patient acceptance because it is not visible and
it produces an immediate improvement in the profile.• It allows more cases to be treated without extractions.
• It is easy to construct, fit, adjust, and clean.
• Materials are inexpensive, and breakage is minimal after a
modest amount of laboratory experience is gained.• The lower splint increases anchorage, thus providing more
of a skeletal correction, and restricts forward movement of the lower incisors
![Page 105: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/105.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 105/250
The Edgewise Herbst Appliance
![Page 106: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/106.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 106/250
The Edgewise Herbst Appliance corrects Class IImalocclusions rapidly and without the need for patientcooperation. It allows orthodontic tooth movements
during orthopedic correction and a smooth transitionfrom Herbst treatment into the edgewise finishingappliance. The new appliance is more clinically efficient than previous models and is easily
incorporated into an edgewise practice.
Herbst With Mandibular
![Page 107: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/107.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 107/250
Herbst With Mandibular
Advancement Locking Unit Components
2 tubes
2 plungers,
2 upper “Mobee” hinges with ball pins
2 lower key hinges with brass pins
![Page 108: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/108.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 108/250
In the upper arch of
the edgewise-HerbstMALU appliance,only the first molarsare banded, with
.051" headgeartubes.
A palatal arch canbe used in cases of overexpansion.
I h l h h fi
![Page 109: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/109.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 109/250
In the lower arch, the firstmolars are banded, and the
anterior segment is bonded from cuspid to cuspid with .022"brackets. The bicuspids may beleft unbracketed to help insettling the occlusion andlocking in the mandible.
The mandible can be
progressively advanced using1-5mm spacers.
Advantages:
![Page 110: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/110.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 110/250
Advantages:
1. Its cost is considerably lower because it requires
no laboratory construction.
2.Its simplicity makes it useful even for non-growing patients in whom only dental
movement and mandibular repositioning arerequired.
3.It can also be used in growing patients whohave not cooperated with removable appliancesor headgear.
Fli L k H b t A li
![Page 111: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/111.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 111/250
Flip-Lock Herbst Appliance
A new design, the Flip-Lock Herbst appliance,reduces the number of moving parts that canlead to breakage or
failure. It is easy to useand more comfortable forthe patient than theconventional cantilever-type Herbst. Instead of ascrew attachment, it has aball-joint connector, andit needs no retainingsprings.
![Page 112: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/112.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 112/250
The first generation was made from adense polysulfone
plastic but breakageoccurred because of the forces generated
within the ball-jointattachment
![Page 113: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/113.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 113/250
In the secondgeneration, the
plastic was replaced with metal
![Page 114: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/114.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 114/250
The third generation ismade of a horse-shoeball joint .
This system has provedto be more efficientthan the previousmodels, both in terms of
application as well as itsresistance to fracture
![Page 115: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/115.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 115/250
End of rod is crimpedonto mandibular ball.
Advantages :Less irritation
reduces the numberof moving parts
that can lead tobreakage or failure
![Page 116: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/116.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 116/250
The Jasper Jumper :
This interarch flexible force module allows patientgreater freedom of mandibular movement than ispossible with the original bite jumping mechanism of
Herbst. Dr. James Jasper in 1987
![Page 117: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/117.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 117/250
Force Module : The force module, analogous to the
tube and plunger of the Herbst bite– jumping mechanism and isflexible.
The force module is constructed of stainless steel coil of springattached at both ends to stainlesssteel end caps in which holes havebeen drilled in the flanges toaccommodate the anchoring unit.
This module is surrounded by anopaque poly urethane covering forhygiene and comfort.
![Page 118: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/118.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 118/250
The modules areavailable in sevenlengths ranging from
26 to 38 mm in 2 mmincrements.
They are designed for
use on either side of the dental arch.
![Page 119: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/119.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 119/250
Principle of action :
When the forcemodule is straight, itremains passive. As
the teeth come intoocclusion the springof the force module iscurved axially
producing a range of forces from 1 to 16ounces.
If l i ll d d dib l
![Page 120: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/120.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 120/250
If properly installed to produce mandibularadvancement, the spring mechanism is curved or
activated 4 mm relative to its resting length, thusstoring about 8 ounces (250g) of potential for forcedelivery.
If less force is desired (eg force levels that producetooth movement alone), the jumper is not activatedfully.
Increasing the activation beyond 4 mm does not yield more force from the module but only buildsexcessive internal stress.
![Page 121: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/121.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 121/250
Anchor units :
A number of methods are availableto anchor the forcemodules to either thepermanent or mixed
dentitions.
Attachment to the main
![Page 122: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/122.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 122/250
Attachment to the mainarch wire :
Dr. Jasper `s method. When the jumper mechanism
is used to correct a class IImalocclusion, the forcemodule is attached
Posteriorly to the maxillary arch by a ball pin placedthrough the distalattachment of the forcemodule.
The module is anchoredanteriorly to the lower arch wire(0.018”x 0.025” or 0.0x0.025” ).
![Page 123: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/123.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 123/250
Bayonet bends are placed
distal to the mandibularcanines and a small Lexanball is slipped over thearchwire to provide ananterior stop.
The mandibular archwire isthreaded through the holein the anterior end cap andthen ligated in place.
The first and second
bicuspid brackets areremoved to allow thepatient greater freedom of movement.
Disadvantages :-
![Page 124: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/124.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 124/250
Unattached bicuspids tend toerupt above the occlusal planeas the anterior teeth areintruded.
When only the lower 1stbicuspid bracket used to beremoved as originally suggested by Dr. Jasper, Jaw
opening used to be limited asthe lower portion of the jumper tends to bind at the2nd bicuspid.
Replacement of a broken jumper required
![Page 125: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/125.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 125/250
removal of the entire archwire.
If an arch breaks or comes untied at thedistal tieback, all the force is transferred tothe anterior teeth, which tends to tip themforward depress them and open space.
Removing the Jumper for an occlusal checkis time consuming.
In an extraction case, it is difficult to close
spaces because the jumper must be attachedto the arch before closing loops.
2. Dr. Cope’s Method :
![Page 126: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/126.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 126/250
Dr. Don cope makes anattachment out of an0.017 x 0.025” stainlesssteel wire, soldered to arocky mountain lock,
then bent so as to passdistal to the lower firstmolar. The lock isattached between thebicuspid and cuspid
An alternative is tol h l k d l
![Page 127: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/127.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 127/250
place the lock distalto the molar bracket
with the wire bentdistal to the cuspid.The approach uses afree sliding quick
connect (figure). The wire runs parallel tothe main archwire,allowing the jumperto clear the bicuspid
brackets.
Advantages
![Page 128: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/128.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 128/250
The attachment can be made in the officelaboratory , and placement can be delegated to anassistant.
The jaws can open fully . Force is directed distal to the molar; if the
archwire breaks there is no effect on the anterior
teeth. The jumper does not interfere with space closure
or leveling procedures. A broken jumper is easy to replace.
No auxiliary tubes are needed on the mandibularmolars.
![Page 129: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/129.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 129/250
Disadvantages :
Laboratory time is required to solder and
bend the attachment.The rocky mountain lock assembly is an
additional expense.
2) A h ili h i
![Page 130: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/130.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 130/250
2) Attachment auxiliary archwire :
Incorporates the use of “outrigges” which are 0.016 x0.022” (0.018” slot) or 0.018 x0.025” (0.022” slot) auxiliary sectional wires.
The sectional arch is loopedover the main archwires
anteriorly between the first
premolar and canine. Posteriorly into the lower first
molar band.
The sectional archwire must haveadequate clearance from the alveolus
![Page 131: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/131.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 131/250
adequate clearance from the alveolusand gingiva to avoid tissueimpingement.
Advantages :
Has all of the previous said advantages plus
The clinician may leave the premolar bands inplace
Materials are in expensive.
Attachment in the Mixed dentition
![Page 132: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/132.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 132/250
The maxillary attachment is asthe original attachment.
The mandibular attachment includes an archwire that extendsfrom the brackets on the lower
incisors, posteriorly to the firstpermanent molars, by passing theregion of the deciduous caninesand molars.
In a mixed dentition patient theuse of a transpalatal arch and fixed
lower lingual arch is mandatory tocontrol potential unfavorable sideeffects.
Divided into 3 phases as advocated by Dr.Jasper
![Page 133: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/133.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 133/250
Jasper
Leveling and anchorage preparation Period of jasper jumper use (6-9 months)
Period of finishing (12 months)
Leveling and anchorage preparation
![Page 134: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/134.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 134/250
Leveling and anchorage preparation Alignment of the maxillary and mandibular
anterior teeth during the initial phases of orthodontic treatment must be completed.Full-sized (or nearly full-sized) archwiresshould be inserted into the brackets in both
arches before the placement of the forcemodules.
The archwires should be tied or cinched backposteriorly to increase anchorage, including
second molars whenever possible. In addition, the clinician can place posterior
tip-back bends in the mandibular archwire toenhance anchorage.
Anterior lingual crown torque can be placed
![Page 135: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/135.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 135/250
gin the arch wire. Alternatively lower incisor
brackets with 5 degrees of lingual crowntorque incorporated into the slot also can beused to prepare anchorage.
Preparation of the arches :
![Page 136: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/136.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 136/250
After the full sized arch wires have becomepassive, the mandibular arch wire isdisengaged and the brackets on the 1st and2nd premolars are removed bilaterally.
Unless on triggers are used, bayonet bends areplaced in the archwire distal to the lowercanine bracket, and 3 mm Lexan beads areslipped over the ends of the arch wire and
moved forward to rest against the bayonetbends bilaterally .
Selection and installation of the
![Page 137: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/137.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 137/250
modules
Determination of properlength of force module. Twelvemillimeters are added tomeasurement of distancebetween mesial aspect of face-bow tube and distal aspect of Lexan ball. In this example,distance from ball to face-bow
tube is 20 mm. Thus 32 mmmodule should be selected.
The lower arch wire in threaded through the holein the anterior end cap of the force module, ligated
![Page 138: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/138.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 138/250
p gin place and the ends of arch wire are cinched or
tied back firmly. Then the ball pin is inserted through the face bow
tube on the maxillary first molar band from distalto mesial and cinched forward.
In-patients with high mandibular plane angle thepin is cinched to achieve approximately 2mm of module deflection (150g / side).
In patients with low or normal mandibular planeangle, the ball pin is cinched forward to achieve 4mm of module deflection (300g force/ side).
The patients are coached to practice opening and
![Page 139: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/139.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 139/250
p p p gclosing movements slowly at first and told to avoid
excessive wide opening during eating and yawning.
Activation of the module for orthodontic and
orthopedic effect :
![Page 140: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/140.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 140/250
orthopedic effect :
If molar distalization is desired. The jumperis placed so that only 2-4 ounces of force is
produced by the module. In growing patients in whom orthopedic
repositioning of the mandible is desired, higher
forces (6 - 8 ounces) are used continuously.
Reactivation of the module :
![Page 141: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/141.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 141/250
If the class II molar relationship is not corrected
completely by the initial activation, the modulesshould be reactivated 2 – 3 months later.
The pin extending through the face bow is pulled
anteriorly 1-2 mm on each side to reactivate themodule.
2-4 mm of the pin should extend distally when the
pins are activated maximally (so that the jumperdoes not blind against the distal aspect of the facebow tube.)
![Page 142: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/142.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 142/250
Ball pin protrudes 2-3mm distally, allowing free movement. B. Ball pin too close to molar
tube, which can cause breakage of ball pin or Jumper. C. Correct placement. Anteriorforce is delivered distal to lower molar bracket, while depressing force is delivered toarchwire between cuspid and bicuspid.
Activation of the force module can also
![Page 143: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/143.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 143/250
be made by crimpable stops (1 – 2mm)
placed mesial to the lexan beads.
It is more accurate
Easier to perform Avoids unintentional restriction of ball
pin / molar tube relationship
Types of forcesproduced :
![Page 144: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/144.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 144/250
Bilateral directions of force generated by themodules includesagittal, intrusive andexpansion forces.
Force module curves tobuccal, producingshielding effect on
dentition.
Buccal force due to intrusive force acting
![Page 145: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/145.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 145/250
along the buccal surfaces of the maxillary teeth
produces maxillary arch expansion. Modules curving outwards Vestibular
shielding effect
Expansion forces can be minimized oreliminated through the use of a transpalatalarch or a heavy arch wire that has beennarrowed and to which buccal root torque hasbeen applied.
Treatment effects :
![Page 146: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/146.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 146/250
Maxillary adaptations :
i) Headgear effect : One treatment effect produced most easily is
distalization of the upper posterior segment or theheadgear effect.
For this the maxillary arch wire must not be cinched ortied back, but remain straight and extend past thebuccal tubes.
Involves light forces (2-4 ounces)
Minimal changes in the mandibular dentition.
This effect can be produced in actively growing as wellas adult patients.
Retraction of anterior teeth
![Page 147: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/147.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 147/250
Retraction of anterior teeth
Upper canines alone or all thesix anterior teeth can beretracted in both extraction andnon-extraction patients with aNiTi coil or an intramaxillary elastic, with the posterior
maxillary dentition supported by the force module.
Cuspid retraction mechanics: As Jumper pushes ball pindistally, molar anchorage ismaintained and cuspid isretracted along archwire.
M ill t i t th
![Page 148: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/148.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 148/250
Maxillary anterior teeth areretracted as a unit by attaching ligature toappropriate archwiretiebacks.
Dental Asymmetries
![Page 149: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/149.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 149/250
The force module system also can beused in-patients who have sagittaldental asymmetries.
In a patient with a class II subdivisiontype of malocclusion the maxillary archwire orthopedic effects may also beachieved.
Asymmetric orthopedic effects may alsobe achieved
Mandibular Adaptations :
![Page 150: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/150.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 150/250
In producing mandibular advancementthe movement of maxillary posteriordentition must be cinched or tied back.
Also a transpalatal arch must be placed,to obtain intra arch anchorage.
Level of force generated is higher (6 to 8ounces ) than for headgear effect.
Jasper’s theory of two’s” suggests that class IIcorrection with Jasper jumper therapy can be
![Page 151: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/151.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 151/250
correction with Jasper jumper therapy can beequally proportioned between 5 components.
1. 20% due to maxillary basal restraint
2. 20% due to backward maxillary dent alveolar
movement 3. 20% due to forward mandibular dentoalveolar
movement
4. 20% due to condylar growth stimulation
5. 20% due to downward / forward glenoid fossaremodeling
Nalbantgil D, Arun T, Sayinsu K, Fulya I Angle( )
![Page 152: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/152.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 152/250
Orthod 2005 studied 15 subjects (class II) treated
with jasper jumper and compared them with15untreated(class II) subjects. They were lateadolescent patients.
Results: Class II discrepancies were mainly corrected by dentoalveolar changes and thiscould be an alternative method to orthognathicsurgery in borderline class II cases.
MARS Appliance
(M dib l d i
![Page 153: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/153.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 153/250
(Mandibular advancing
repositioning splint). This appliance was introduced
by Ralph M Clements and Alex Jacobson.1982
The MARS appliance iscomposed of a pair of telescopic struts, the ends of
which are attached to theupper and lower archwires of amulti-banded fixed applianceby means of locking device.
![Page 154: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/154.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 154/250
The Piston fitted tothe cylinder of aMARS appliance.
• Alignment must be complete.
![Page 155: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/155.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 155/250
• The teeth in the respective arches
should be aligned, with correct axialinclinations, prior to attachment of the appliance.
• The MARS appliance should beattached only to the heaviest
rectangular arch wires that can beaccommodated by the brackets andtubes. The heavy arch wire preventsbreakage at the point of attachmentas well as excessive intrusion in theregion of the mandibular canines.
• The mandibular arch wires shouldbe securely tied back to the terminalmolar before attachment of theMARS appliance.
Failure to do this will usually result in flaring of the
![Page 156: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/156.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 156/250
y glower incisors, even with the heavy rectangular
arch wire, since the untied arch wire will slideforward through the tubes and brackets of theposterior teeth. Previously closed mandibularextraction spaces are likely to reopen if this
precaution is not taken.
Determining length of
![Page 157: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/157.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 157/250
assembly… With the patients protruding the mandible into a class
I position, the right and left strut lengths aremeasured.
Tube attached most mesially on the last molarincorporated and most distally to mandibular canines.
The MARS strut length is that distance from themiddle of the interbracket space distal to the lowercanine to the middle of the interbracket space mesialto the maxillary terminal molar.
The upper member or hollow tube length is determinedby subtracting a calculated and standardized
![Page 158: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/158.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 158/250
by subtracting a calculated and standardizedmeasurement of 7.4mm from the strut length.
The free end of the lower member or the plunger is thencut so that 2mm extends out of the back of the uppermember
One reference measurement needed for this applianceis the PIED (Protrusive incisial edge distance) PIED isthe horizontal distance measured at the midlinebetween the maxillary and mandibular incisial edges
with the mandible in its maximum strained protruded
position.
The MARS appliance should be locked into positionwith the mandible 2 to 3 mm posterior to the maximum
![Page 159: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/159.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 159/250
with the mandible 2 to 3 mm posterior to the maximumPIED measurement. In the event a patient encountersmuscular discomfort as a result of protruding themandible too far forwards the appliance is adjusted andlocked in a less protrusive position.
At subsequent appointment the PIED should bemeasured and recorded. The authors have observedthat the PIED will increase from 0.5 to 2 mm between 3to 4 week appointment intervals. When the PIEDceases to increase between appointments, the MARS
appliance is then adjusted so that a super class Iocclusal relationship is obtained.
Two methods to lengthen the appliance
) R l f h i h l b f
![Page 160: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/160.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 160/250
1) Replacement of the struts with longer upper members of cylinders.
2)Placement of spacers 2 to 3 mm in length on the lowermembers or pistons.
Unlike the Herbst appliance, the MARSappliance :
Requires neither soldering nor extensive labprocedures.
Has minimal incidence of breakage Does not depress the canines, open spaces in the
premolar area or flare mandibular incisors(provided the mandibular rectangular archwire istied back to the terminal molars)
Is easily removed.
Disadvantages :
![Page 161: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/161.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 161/250
Need for a fixed multi-banded appliance limits itsuse in mixed dentition cases.
Disarticulates at the posterior segments from 1 to 3mm
Need to customize the appliance for each patient.
dib l i li
![Page 162: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/162.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 162/250
Mandibular Protraction appliances : This appliance was
developed by Carlos MartinCoelho Filho (JCO 1995).
His inability to purchase
some of the newer class IIcorrective appliances innorthern Brazil led him todevelop these group of appliance that reposition
the mandible forward.
![Page 163: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/163.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 163/250
They have proven effective in treating Class I patients with exaggerated overjets and Class II subdivisionpatients where only one side needs correction.
Their advantages include ease of fabrication, low cost,
infrequent breakage, patient comfort, and rapidinstallation.
But they are not claimed to be superior but are only
treatment alternatives to Class II therapies.
Each side of the appliance is madeby bending a small loop at a right
![Page 164: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/164.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 164/250
by bending a small loop at a rightangle to the end of an .032"
stainless steel wire.
The length of the appliance isthen determined by protrudingthe mandible into a position with
proper overjet, overbite, andmidline correction and measuringthe distance from the mesial of themaxillary tube to the stop on themandibular archwire.
Another small right-anglecircle is then bent in an
![Page 165: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/165.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 165/250
opposite direction into the
other end of the .032" stainlesssteel wire. The angulation of these circle bends can vary toallow free sliding along the
mandibular archwire.One appliance circle is
placed over the maxillary archwire against the molar
tube, and the other circleagainst the mandibulararchwire stop. Both circles arethen closed completely with aplier.
Functioning of the appliance MPA -1
![Page 166: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/166.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 166/250
Appliance slides distally along mandibular archwireand mesially along maxillary archwire upon opening.
But frequent dislodgmentof molar bands led Filho todevelop the 2nd protractionappliance. (MPA n.o 2)
MPA No. 2
MPA No 2 is made ith right
![Page 167: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/167.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 167/250
MPA No. 2 is made with right-
angle circles in two pieces of .032" stainless steel wire.
Coil of .024" stainless steel wire is slipped over one wire.
Travel of each wire is limitedby wire coil.
Improper relationship of wires is prevented by coil
![Page 168: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/168.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 168/250
wires is prevented by coil.
Maxillary archwire hasocclusally directed circlesagainst molar tubes;
mandibular archwire hasocclusal circles 2-3mmdistal to each cuspid.
Advantages : Easily fabricated at chair side, with
ordinary inexpensive wires
![Page 169: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/169.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 169/250
ordinary inexpensive wires.
Do not require any special bands ,crowns or wire attachments.
No impression or wax biteregistrations are needed.
Easily inserted adjusted,removed andcan be made and installed in about 30minutes.
Much smaller and thus more
comfortable. Permit a greater range of motion and
are less restrictive of movement
MPA-3 CARLOS M COELHO FILHO (JCO
![Page 170: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/170.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 170/250
CARLOS M. COELHO FILHO,(JCO2001)
Many of the limitations of thefirst two MPA designs have beenovercome with the developmentof the MPA No. 3.
This version eliminates much of the archwire stress and permits agreater range of jaw motion whilekeeping the mandible in a
protruded position.
Appliance construction The parts needed for the
![Page 171: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/171.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 171/250
The parts needed for theconstruction of the MPA No. 3 are:
Two maxillary tubes of 0.045”internal diameter each about 27mm long.
Two maxillary loops of 0.040”stainless steel wire, each about 13mm, long, with a loop bent intoone end at an angle of about 130 tothe horizontal.
Two mandibular rods of 0.036”stainless steel each about 27 mm
long.
![Page 172: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/172.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 172/250
![Page 173: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/173.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 173/250
Annealed pin bent mesial to the molartube
![Page 174: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/174.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 174/250
![Page 175: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/175.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 175/250
MPA No. 3 reversedfor Class III treatment, with open-coil springbetween appliance
tubeand rod loop.
Advantages of MPA n.o 3 over the
previous models :
![Page 176: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/176.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 176/250
previous models :
More comfortable for the patient
Offers greater range of motion
Equally simple and inexpensive but easier to
place Adaptable to either class II or class III cases
Can be used for mandibular positioning ordento alveolar movement
Causes less breakage.
MPA IV The latest version the
![Page 177: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/177.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 177/250
The latest version, the
MPA IV,** is much easierto construct and install,and much morecomfortable for thepatient. The MPA IV ismade up of the following
parts:
• “T” tube • Upper molar locking
pin • Mandibular rod •Mandibular archwire
Piece of .040" stainless steel wireis inserted into longer tube toprevent deformation whilebending molar locking pin with
![Page 178: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/178.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 178/250
finger pressure.
Molar locking tube is then cutand annealed to make it easy tobend during installation.
Mandibular rodinserted into “T”tube
![Page 179: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/179.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 179/250
tube.
This fourth version seems tobe as efficient as its
antecedents, but is muchmore practical to construct,easy to manipulate, andcomfortable for the patient.
Adjustable Bite corrector (ABC) (JCO 1995)
Introduced by Richard P West
![Page 180: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/180.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 180/250
Introduced by Richard P. West
The appliance essentially consistsof:
A stretchable closed coil springand internally threaded end cap
nickel titanium wire in the centrelumen of the spring.
The closed coil spring is made of
0.01 8” stainless steel, and willstretch to about 25% beyond itsoriginal length withoutpermanent deformation.
The ABC can be used oneither side of the mouthwith a simple 180
![Page 181: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/181.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 181/250
with a simple 180
rotation of the lower endcap to change itorientation.
Functions similar to theHerbst and Jasper Jumperbut also incorporatesseveral useful features
likea) Universal right and leftb) Adjustable length andforce
After the patient has posturedforward into an improved
fil ith id l bit /
![Page 182: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/182.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 182/250
profile with ideal overbite /
overjet the point of the gauge isplaced into the mesial openingof the headgear tube.
The size is then read at pointabout 3mm below the contactbetween lower cuspid and firstpremolar using the correctappliance size ensuringoptimum force delivery.
![Page 183: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/183.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 183/250
Nickel titanium wire isreplaced and end capsunscrewed to add appliance
length.
Repairs and emergencies :
![Page 184: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/184.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 184/250
Wire fractures are infrequent with the ABC. Repair is easy, where the end caps are unscrewed and
the coil spring or nickel titanium wire is replace witha new one from the kit.
![Page 185: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/185.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 185/250
The ABC can be used for upper molar anchoragecontrol during retraction of anterior teeth for spaceclosure.
The class II “push” force of the ABC creates full timemaximum anchorage at the upper molars whilebringing the lower posterior teeth forward form thepull at the jig attachment.
The Eureka Spring (JCO 1997)
Introduced by John De Vincenzo
![Page 186: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/186.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 186/250
The main component of the Eurekaspring is an open wound coil springencased in plunger assembly
The ram is made from a special work hardened stainless steel thathas been precision machined with3 different radii.
At the attachment end the ram has
either a closed or an open ringclamp that attaches directly to thearchwire.
The essentialaspects include
i d l A
![Page 187: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/187.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 187/250
spring module A,
molar attachmenttube B, push rod C,free distance D,molar attachment
wire E, free distanceF.
A triple telescoping action permits the mouthto open as wide as 60 mm before the plungerbecomes disengaged.
![Page 188: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/188.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 188/250
g g
The cylinder assembly is connected to a molartube with a an 0.032” wire that has beenannealed at the anterior end.
An 0.036” solid ball at the posterior end acts as
a universal joint, permitting lateral and verticalmovements of the cylinder.
The Eureka spring comes in only 2 sizes one forextraction and one for non-extraction cases and
left and the right sides are interchangeable.
Advantages It has esthetic acceptability because of its small size and
lack of protuberances into the buccal vestibule, as it isl bl
![Page 189: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/189.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 189/250
palmost invisible.
Resistance to breakage: produces forces of only 140g-170gat the points of attachment as compared to 220-280g of
Jasper Jumper. Ability to produce rapid movement : this is in spite of its
low force levels because the Eureka spring continues to work even when the mouth is opened as much as 20 mmas when sleeping or when the mandible is thrust forwardas far as 10 mm, in an attempt to minimize the force.
Ease of installation
No auxiliary archwires or extra impressions for laboratory fabrication are needed.
Low cost : similar in cost to the jasper jumper butless expensive than the fixed Herbst appliance.
![Page 190: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/190.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 190/250
Minimal inventory requirement
Optimal direction of force
Delivers a push force against mandibular anterior
and maxillary posterior teeth. It also has a vertical intrusive component at the
maxillary molars and mandibular although this isminimal due to direct archwire attachment,
rather than via auxiliary wire.
The churro jumper (JCO 1998)
Introduced by Ridhardo Castanon, Mario SValdes and Larry White
![Page 191: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/191.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 191/250
Valdes and Larry White.
The Churro Jumper furnishes orthodontists with an effective and inexpensive alternativeforce system for the anteroposterior correctionof class II and class III malocclusions.
It was developed as an improvement of the
MPA of Coelho. Although the churro jumper was conceived asan improvement to the MPA, it functions merelike a Jasper Jumper.
Construction :
The Churro Jumper requires aseries of 15-20 symmetrical and
![Page 192: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/192.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 192/250
5 y
closely placed circles, formed ina wire size of .028" to .032".
Since the Churro Jumperrequires reciprocal anchorage,Generally, the largest possibleedgewise archwire is the best touse. This will usually be an .018"
X .025" archwire, or .0175"X .025". Any wire smaller thanthese invites breakage.
Churro needs space to slide onthe mandibular archwire, atleast the first premolar bracketsshould be omitted. It is usually
![Page 193: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/193.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 193/250
advantageous to place a buccaloffset in the wire just distal tothe canine bracket so that the jumper also has buccalclearance, which permits
unrestricted sliding along the wire
The length of the jumper isdetermined by the distance from thedistal of the mandibular canine bracket
h i l f h h d b
![Page 194: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/194.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 194/250
to the mesial of the headgear tube on
the maxillary molar band, plus 10-12mm. This measurement is transferredto the Churro Jumper, with the coilcloser to the canine bracket than to theheadgear tube.
Mode of action :
In its passive form, thechurro is not flexed
![Page 195: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/195.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 195/250
However when the pin ispulled forward enough tocause the jumper to bowoutward the cheek, the
appliance begins to exert adistal and intrusive forceagainst the maxillary molar and a forward andintrusive force against the
incisors as it attempts tostraighten.
Unilateral / Bilateral use :
This jumper can be used unilaterally in cases of class II subdivision malocclusions
![Page 196: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/196.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 196/250
class II subdivision malocclusions.
The bilateral class II churro jumper is mostsuitable for patients who need mandibularincisors advancement. Not a very good choice
for class II bimaxillary proclination cases. By reversing the attachments, the churro
jumper can also be used to treat class IIImalocclusions.
Advantages :
Provides a constant, indefatigable force.
![Page 197: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/197.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 197/250
Can be used either unilaterally or bilaterally. Can be used in class II or class III cases.
Helps maintain anchorage.
Very inexpensive.
Can be constructed from commonly available materials universal in size.
When broken, it is easily replaced.
Staff members can quickly learn how toreplace an appliance.
Disadvantages :
Restricts the mouth opening to 30-40 mm
![Page 198: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/198.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 198/250
p g 3 4
Archwire breakage is seen if larger wires not used. Patients with a low tolerance for discomfort will
often break the appliance. Patients who incessantly move their mouths while
chewing, talking and nervous tics will fare poorly. Its maximum effectiveness depends on a
permanent dentition to retain its effect. It must be manufactured in the office.
The universal bite jumper (JCO 2001)
I d d b X i C l
![Page 199: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/199.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 199/250
Introduced by Xavier Calvez
This is a fixed functional whichcan be used in all phases of treatment, in the mixed orpermanent dentition and with
removable or fixed appliances.
This jumper also uses atelescoping mechanism, canalso have an active coil spring if
necessary.
Fixed appliance configuration
![Page 200: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/200.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 200/250
In the mandibular arch, the sliding rod ends in a 90° hook that is fixed to thearchwire.
UBJ ATTACHED TO AUXILLARY WIRE
![Page 201: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/201.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 201/250
Lower cantilever configuration
![Page 202: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/202.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 202/250
The UBJ tubes are welded to the maxillary molar bands or crowns. .
The UBJs are adjusted while mandibular movements are checked.
Depending on the case, the brackets can be bonded during thesame visit or a few weeks later.
The advantage of this configuration is the possibility of immediate
orthopedic action without waiting for dental alignment.
Removable splint mounting
![Page 203: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/203.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 203/250
When used with removable acrylic splints, two lateral UBJs
link the maxillary molar areas and the mandibular firstpremolar areas. They are attached to 1.2mm ball clasps,
which are constructed on the working cast and thenincorporated into the thermoformed splints.
Single median UBJ
A single median UBJ can be
![Page 204: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/204.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 204/250
g J
used to link the removablesplint from the middle reararea of the palate to thelingual surface of themandibular incisor.
The UBJ is attached to twotransverse axles, whichallow opening and lateral
movements.
The median UBJ provides muscular therapy as itprevents the tip of the tongue from contacting the
![Page 205: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/205.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 205/250
prevents the tip of the tongue from contacting the
lower lip. Most children are able to speak well with this
appliance, given a little time to adjust. Cheekimpingement is eliminated and it is the author’s
experience that the tongue is not irritated with thisdesign.
Adjustments :
Reactivation are made
![Page 206: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/206.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 206/250
Reactivation are made
every 6 to 8 weeks by crimping 2 to 4 mmsplint bushings on tothe rods.
Midline orasymmetrical problems
can easily be treated by adjusting one side orother of the appliance.
Advantages
It is simple, sturdy, and inexpensive.
![Page 207: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/207.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 207/250
Inventory requirements are minimal--the UBJcan be used on either side of the mouth, andthere is only one size, since it is cut to thedesired length for each case.
It can be used at any stage of treatment --in theearly mixed dentition to obtain an immediatemandibular advancement before any dental
alignment, or in the permanent dentition forfixed functional treatment.
It can be used in Class II or Class III cases.
![Page 208: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/208.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 208/250
Its low profile results in considerably lessbuccal irritation than with similar appliances.
Patient comfort and acceptance are excellent.
It can easily be attached to removable splintsfor maximum anchorage.
It produces good results without the need forpatient cooperation
The saif Spring
(Severable Adjustable inter maxillary force)
![Page 209: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/209.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 209/250
First interarch force system developed by Armstrong In the later 1960’s and early 1970’s he introduced
the Pace Spring, later termed multicoil spring andfinally called Saif spring.
These were first marketed by North Westorthodontics, later by Unitek, and currently by Pacific coast manufacturing.
They consist of two springs one inside the other with soldered loops on each end.
Various attachments can be placed through these loopsto secure the springs to deliver either class II or class IIIforce
![Page 210: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/210.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 210/250
force.
They are available in 7 mm and 10 mm lengths, have anoutside diameter of 3 mm, and deliver 200 to 400 gmsof force.
Breakage is a constant problem. Bit bulky, not very hygienic and there is some limitation
to mandibular opening
However large forces are generated by these springs which may account for the surprisingly rapid correctionobserved.
The Ritto Appliance
![Page 211: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/211.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 211/250
The Ritto Appliancecan be described as aminiaturized
telescopic device withsimplified intraoralapplication andactivation
Fixation accessoriesconsist of a steel ball pinand a lock.
![Page 212: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/212.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 212/250
Upper fixation is carriedout by placing a steel ballpin from the distal intothe .045 headgear tube
on the upper molar band,through the applianceeyelet and then bendingit back on the mesial
end.
The appliance is fixedonto a prepared lowerarch and is activated
![Page 213: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/213.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 213/250
by sliding the lockalong the lower archin the distal directionand then fixing it
against the Ritto Appliance.
The Magnetic Telescopic Device
Ritto A.K. in 1997
This consists of two tubes and two
![Page 214: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/214.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 214/250
This consists of two tubes and twoplungers with a semi-circularsection and with NdFeB magnetsplaced in such a manner that arepelling force is exerted.
Fitting is achieved by using theMALU system.
This appliance has the advantage of linking a magnetic field to thefunctional appliance. Its main
disadvantages are its thickness, thelaboratory work necessary toprepare it and the covering of themagnets.
THE TWIN FORCE BITE CORRECTOR This appliance differs from others
![Page 215: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/215.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 215/250
in form and constitution becauseit has two internal coil springs. Itconsists of two joint telescopicsystems. At the superior level it isfixed with a ball pin that is fittedinto the buccal tube of a molarband.
The placement in the lower arch isslightly different; it involves a
fitting-in system that is later fixed with a screw to the inferior arch.Normally it is placed distal to thelower cuspid.
Drawbacks:
The major drawback of this appliance is the
![Page 216: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/216.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 216/250
this appliance is thedifficulty to control theforce.
May create discomfort
and impingementproblems.
Is recommended only forpermanent dentition.
ALPERN CLASS II CLOSERS It is one of the most recent.
It is predominantly applied in
![Page 217: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/217.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 217/250
Class II correction and as asubstitute for elastics.
It consists of a small telescopicappliance with an interior coilspring and two hooks for fixing
It functions in the same way aselastics and, similarly, is fixed tothe lower molar and to the uppercuspid.
It is available in three differentsizes. Its telescopic action enablesa comfortable opening of themouth.
Mandibular Corrector (JCO 1985)
Introduced by Marston Jones
It is a fixed functional that uses
![Page 218: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/218.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 218/250
It is a fixed functional that usesbilateral piston and plungertelescopic mechanism toreposition the mandibleanteriorly and is directly
attached to archwires of amultibanded fixed appliance.
Connectors holding therepositioning arms are attached
to the archwires distal to thelower cuspid brackets and mesialto the tubes on the terminalupper molars.
The length of the repositioning arms are determinedintraorally with the patient’s mandible advanced 3-4 mm.
The entire procedure can be completed at chair side in 30minutes.
![Page 219: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/219.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 219/250
The mandible can be advanced in small increments of 2-4mm at 4 week intervals until the incisors are in an edge toedge relationship.
Midline corrections are made by advancing the appliancemore on one side.
A correction of 3-4 mm can be achieved within 6 months,an overjet of 7 to 8 mm may require 12-14 months.
The Horizontal Anterior Positioning (HAP)appliance
Most of the appliances have
![Page 220: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/220.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 220/250
anterior contact while allowing forposterior eruption. Unfortunately,the lack of posterior support hasbeen shown to have a loadingeffect on the TMJ.
Dr. William B. Farrar recognizedthe need for posterior support andmodified the original Svedappliance to incorporate twoposterior acrylic pads along withan anterior ramp.
Components of HAP appliance: A. Anterior reverse ramp. B.
Sagittal screws. C. Expansion arms. D. Coffin spring. E. Locking
mechanism.
![Page 221: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/221.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 221/250
Anterior reverse ramp
Sagittal screws
Expansion arms
Locking mechanism
Coffin spring
A lower "dipod, whichprovides upper and lowerposterior occlusal support.
![Page 222: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/222.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 222/250
A posterior pad can beadded to the HAP, butadjustments become moredifficult and the possibility of breakage increases.
The vertical dimension canbe increased if necessary. Thebite-opening effect allows forpassive or active eruption of
the posterior occlusion tohelp level the curve of Spee.
The Mandibular Anterior Repositioning
Appliance(MARA)
These interference’s are produced when a
![Page 223: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/223.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 223/250
p
horizontally adjustable vertical barattached to the buccal surface of amaxillary first molar stainless steel crown,hits a buccally protruding horizontal bar
extending from the lower first molarstainless steel crown.
Additional activations can be made by placing one or more shims at the mesialaspect of the horizontal bar. Advancing the mandible forward in
precise increments can be achieved by insertion of selected shims of varying
Advantages over Herbst
Better esthetics
![Page 224: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/224.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 224/250
Problem with disengagement do not occur Breakage from lateral mandibular movements
should be less.
Can be used concurrently with full edgewise
orthodontic appliance. This
Eliminates the need for a 2 phase treatment.
Can maintain the achieved orthopedic results, since the
appliance can continue in a non activated manner.
Disadvantages
Temporary stainless steel crowns needed on allfirst molars.
![Page 225: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/225.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 225/250
st o a s.
Some increase in anterior facial height resultsfrom the placement of these crows.
Fabrication only available at one commercial
laboratory. The posterior and buccal location of the guide
planes may cause loosening of the stainlesssteel crowns or breakage of the mandibularprotruding horizontal bar.
Functional Mandibular Advancer Kinzinger,Ostheimer, Diederich,2002
It has a propulsive mechanism thatresembles the Mandibular anterior
![Page 226: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/226.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 226/250
resembles the Mandibular anteriorrepositioning appliance, but differs inits mode of action and intraoralactivation.
It relies on the principle of inclined
planes that are placed in the buccalcorridor spaces that will not hinderswallowing or articulation.
The protrusion guide pins are fitted to
the upper portion of the apliance at a60 degree angle to horizontal, ensuringactive, forward mandibular guidanceduring even partial jaw closure.
Reactivation in the sagittal planeis done simply by moving theguide pins to a more forwardthreaded support sleeve. This
![Page 227: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/227.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 227/250
gradual activation allows patientsparticularly adults to adjust to theappliance.
Kinzinger, Diederich JCO 2005 reports the use of FMA in a 16 yearold male with Class II div2 and for just 3 months the patient was able
to protrude the mandiblesignificantly forward from thetherapeutic position.
![Page 228: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/228.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 228/250
Advancement in
therapeutic positionsMaximum protrusionof mandible after 3months
The Biopedic
Designed and introduced by Jay Collins in 1997 (GAC International)
![Page 229: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/229.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 229/250
It consists of buccal attachmentssoldered to maxillary andmandibular molar crowns.
The attachments contain a standard
edgewise tube and a large 0.070 inchmolar tube. Large rods pass throughthese tubes.
The mandibular rod inserts from the
mesial of the molar tube and is fixedat the distal by a screw clamp. By moving the rod mesially theappliance is activated.
This short maxillary rod is inserted screw atthe mesial of the maxillary first molar.
![Page 230: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/230.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 230/250
The two rods are connected by a rigid shaftand have pivotal region at their ends.
Although, it appears that there would belimitation of mandibular opening, it is not so.The design works more in harmony with thearc of mandibular opening.
Advantages
Can be used concurrently with bandedtreatment.
![Page 231: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/231.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 231/250
Esthetic benefit
Capability of adjusting the amount of protrusiveactivation.
Disadvantages
Potential for more breakage and loose crowns
Greater cost.
Need for crowns on molars
The Klapper Superspring II Introduced by Lewis Klapper in
1997, for correction of class IImalocclusions.
![Page 232: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/232.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 232/250
On first glance, it resembles a Jasper Jumper with a substitution of a cablefor the coil spring. In 1998 the cable was wrapped with a coil and the
Klapper superspring II was theresult.
Only two sizes are required (left andright sides are not interchangeable)and breakage is less frequent.
However it differs significantly fromthe Jasper Jumper at the molarattachment.
The SUPERspring II is aflexible spring element thatattaches between themaxillary molar and the
![Page 233: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/233.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 233/250
ymandibular canine. It isdesigned to rest in the
vestibule, making itimpervious to occlusal
damage and allowing forgood hygiene. Only minoradjustments are needed forpatient comfort, without any impingement on soft tissues.
Disadvantages
Requirement of a special molar tube
![Page 234: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/234.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 234/250
Lack of adaptability to correct class III conditions Limitation to maximal opening
Potential injury to the patient if breakage occurs andthe rigid molar attachment forces the broken portion
into the soft tissues.
Forsus Fatigue resistant Device This is an interarch push
spring which produces
![Page 235: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/235.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 235/250
p g pabout 200g of force whenfully compressed.
The distal end of the FRD`s
push rod inserts into thetelescopic cylinder and ahook on the mesial end iscrimped directly to thearchwire near the canine or
premolar brackets.
The push rod has a built instop that compresses thespring when the patientsmouth closes. The spring isthen transferred to the
![Page 236: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/236.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 236/250
maxillary molars using themandibular arch as theanchorage unit.
The L-pin is inserted in the
eyelet of the telescopingspring and is threadedthrough the molar headgeartube from distal to mesial andcinhed,leaving 2mm slack.
The mesial hook is loopedover the mandibular arch wireand crimped shut.
Advantages: It does not require time-consuming and
expensive lab work or the use of stainless steel
![Page 237: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/237.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 237/250
crowns. It produces consistent treatment results in a
predictable amount of time, without dependingon
patient cooperation. It can deliver an orthopedic effect to both jaws
or more of a dentoalveolar effect. It can be activated more on one side than on the
other, so it excels at correcting midlinedeviations.
William Wogt JCO June 2006 reports a case where a 12 year old male with class II division 1and moderate overjet of 7mm was corrected
![Page 238: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/238.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 238/250
with the Fatigue resistant device in 6monthsafter which it was used as an anchorage unit forthe retraction of the maxillary anteriorsegment.
Conclusion :
Fixed functional appliances form an useful
![Page 239: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/239.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 239/250
addition to the clinician’s orthodonticarmamentarium. But many of these appliancesneed further studies to substantiate the claimsmade by their respective originators. With this
in mind, clinicians must take great care inselecting the right patient and also pay attention to every detail in the manipulation, toattain successful results with these appliances.
erences:1. Larry.W. White :Current Herbst Appliance
Therapy:JCO 1997,May(296 - 309)
![Page 240: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/240.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 240/250
2. Arji George, V. Surendra Shetty, SN Rao & Ashima Valiathan: Effect of Herbst appliance on
Orofacial musclature. Journal of IndianOrthodontic Society. 1993; 4(3): 93-99.
3. S.Jay Bowman: Jasper Jumper in Class II
correction. A case report. JIOS 2001;34:101-105.
4. Kinzinger, Oestheimer, Deidrich:
Development of a new fixed functional
![Page 241: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/241.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 241/250
appliance for treatment of skeletal class IImalocclusion.J. Orofac Orthop 2002 63:384-399
5. Ken Hansen: Treatment and posttreatmenteffects of the herbst appliance on the dentalarches and arch relationships. Semin Orthod2003 March,page 67-73
![Page 242: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/242.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 242/250
9. Sabine Ruf, Hans Pancherz: When is the ideal period forHerbst therapy-Early or Late? Semin Orthod
![Page 243: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/243.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 243/250
2003,March,page 47-56
10. Mc Namara, Brudon, Kokich, Orthodontics andDentofacial Orthopaedics, 2001 page 285,333
11. Cope J.B., Buschang P., Cope D.D., Parker J., BlackwoodH.O. Quantitative evolution of craniofacial changes with
Jasper Jumper Therapy. Angle Othod. 1994; 64 (2): 113 – 122.
12. Miller R.A. The Flip-lock Herbst Appliance. J. Clin. Orthod. 1996; 30: 552 – 58.
![Page 244: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/244.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 244/250
13. Jasper J.J., McNamara J. The correction of interarch malocclusions using a fixed forcemodule. Am. J. Orthod. Dentofac. Orthop.1995; 108: 641-50.
14. Pancherz H. Treatment of Class IImalocclusions by jumping the bite with theHerbst appliance. A cephalometric
investigation. Am. J. Orthod. 1979; 76: 423-442
15. Heinig N, Goz G: Clinical application andeffects of the Forsus spring. A study of a newHerbst hybrid, J Orofac Orthop. 2001
![Page 245: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/245.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 245/250
Nov;62(6):436-50.
16. Pancherz H. The mechanism of Class IIcorrection in Herbst appliance treatment. Am.
J. Orthod. 1982; 87: 1-20.
17. Pancherz H. The Herbst appliance – Itsbiological effects and clinical use. Am. J.
Orthod. 1985; 87: 1-20.
18. Erdogan E. Asymmetric Application of the Jasper
Jumper in the correction of midline discrepancies. J.Clin. Orthod. 1998; 32: 170 – 80.
b f h d ff f h b
![Page 246: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/246.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 246/250
19. Sabine Ruf:Short and Longterm effects of the Herbstappliance onTemporomandibular jointfunction,Semin Orthod 2003 March page 74-86.
20. Cash R.G. Case Report: adult nonextraction treatment
with a Jasper Jumper. J. Clin. Orthod. 1991; 25: 43-7..
21. Castañon R., Valdes M., White L.W. Clinical useof the Churro Jumper. J. Clin. Orthod. 1998; 32:
![Page 247: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/247.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 247/250
731 – 45.
22. Blackwood H.O. Clinical Management with the Jasper Jumper. J. Clin. Orthod. 1991; 25: 755-60
23. Haegglund P. The Swedish-Style IntegratedHerbst Appliance. J. Clin. Orthod. 1997; 31: 378 – 390.
24. Pangrazio-Kulbersh V, Berger JL, Chermak DS,Kaczynski R, Simon ES, Haerian A:Treatment
ff f h d b l
![Page 248: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/248.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 248/250
effects of the mandibular anteriorrepositioning appliance on patients with ClassII malocclusion. Am J Orthod DentofacialOrthop. 2003 Mar;123(3):286-95
25. Calvez X. The universal bite jumper. J. ClinicalOrthod. 1998; 32: 493-499.
26. Filho C.M. Mandibular Protraction Appliancesfor Class II Treatment. J. Clin. Orthod. 1995;29: 319 – 336.
27. Hans Pancherz :History, Background, andDevelopment of the Herbst Appliance, Semin
O h d M h
![Page 249: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/249.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 249/250
Orthod 2003,March page3-11
28. Filho C.M. Clinical Applications of theMandibular Protraction Appliance. J. Clin.
Orthod. 1997; 31: 92 – 102.29. Filho C.M. The Mandibular Protraction
Appliance III. J. Clin. Orthod. 1998; 32: 379-384
30. Mandeep sood, k.Sadashiva Shetty:
Functional therapy- Is it worth the effort? JIOS1994 October page 128-136.
![Page 250: Fixed Fntl Appliance](https://reader031.fdocuments.us/reader031/viewer/2022021116/55cf9d0e550346d033ac1012/html5/thumbnails/250.jpg)
7/22/2019 Fixed Fntl Appliance
http://slidepdf.com/reader/full/fixed-fntl-appliance 250/250
31. Aidar LA, Abrahao M,Yamashita HK,Dominguez GC:Herbst appliance therapy andtemporomandibular joint disc position- A prospective longitudinal magnetic resonanceimaging study. Am J Orthod DentofacialOrthop. 2006 Apr;129(4):486-96.